Pull pvops into release branch

[sfrench/cifs-2.6.git] / arch / arm / plat-s3c / include / plat / uncompress.h

diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 4df006b9cc1053199d59fe348bdbca61fde624f4..dc66a477f62e3612f200ff31000138d7d67378ad 100644 (file)
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -28,7 +28,7 @@ static void arch_detect_cpu(void);
 /* defines for UART registers */
 
 #include <plat/regs-serial.h>
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
 
 /* working in physical space... */
 #undef S3C2410_WDOGREG
@@ -37,7 +37,7 @@ static void arch_detect_cpu(void);
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX        (14)
 
-#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
+#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
@@ -90,7 +90,10 @@ static inline void flush(void)
 {
 }
 
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+#define __raw_writel(d, ad)                    \
+       do {                                                    \
+               *((volatile unsigned int __force *)(ad)) = (d); \
+       } while (0)
 
 /* CONFIG_S3C_BOOT_WATCHDOG
  *
@@ -139,6 +142,28 @@ static void arch_decomp_error(const char *x)
 
 static void error(char *err);
 
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+       u32 fifocon = uart_rd(S3C2410_UFCON);
+
+       if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+               fifocon |= S3C2410_UFCON_RESETBOTH;
+               uart_wr(S3C2410_UFCON, fifocon);
+
+               /* wait for fifo reset to complete */
+               while (1) {
+                       fifocon = uart_rd(S3C2410_UFCON);
+                       if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+                               break;
+               }
+       }
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+
 static void
 arch_decomp_setup(void)
 {
@@ -149,6 +174,12 @@ arch_decomp_setup(void)
 
        arch_detect_cpu();
        arch_decomp_wdog_start();
+
+       /* Enable the UART FIFOs if they where not enabled and our
+        * configuration says we should turn them on.
+        */
+
+       arch_enable_uart_fifo();
 }