ARM: dts: sun7i: Change pinctrl nodes to avoid warning

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / sun7i-a20-olinuxino-lime2.dts

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index b828677f331d5d6c89763d3e5a76d1779bd583af..9ea84cf6437b35939316679e1f6f4d246f441992 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -110,7 +110,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
@@ -132,7 +132,7 @@
 
 &i2c0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
+       pinctrl-0 = <&i2c0_pins>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -144,7 +144,7 @@
 
 &i2c1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
+       pinctrl-0 = <&i2c1_pins>;
        status = "okay";
 
        eeprom: eeprom@50 {
@@ -154,9 +154,13 @@
        };
 };
 
+&lradc {
+       vref-supply = <&reg_vcc3v0>;
+};
+
 &mmc0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
+       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -176,11 +180,6 @@
 };
 
 &pio {
-       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-               pins = "PC3";
-               function = "gpio_out";
-       };
-
        led_pins_olinuxinolime: led_pins@0 {
                pins = "PH2";
                function = "gpio_out";
@@ -198,15 +197,9 @@
                function = "gpio_in";
                bias-pull-down;
        };
-
-       usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
-               pins = "PC17";
-               function = "gpio_out";
-       };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -254,7 +247,6 @@
 };
 
 &reg_usb0_vbus {
-       pinctrl-0 = <&usb0_vbus_pin_lime2>;
        gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -269,7 +261,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };