ARM: dts: rockchip: use pin constants to describe gpios

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / rk3288-veyron-minnie.dts

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index f72d616d1bf8dbd1739472f9e5f04656883eecdd..544de6027aaa0fcb9f4f11a94b9367534f77afab 100644 (file)
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -55,7 +55,7 @@
        backlight_regulator: backlight-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&bl_pwr_en>;
                regulator-name = "backlight_regulator";
@@ -66,7 +66,7 @@
        panel_regulator: panel-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&lcd_enable_h>;
                regulator-name = "panel_regulator";
@@ -77,7 +77,7 @@
        vcc18_lcd: vcc18-lcd {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&avdd_1v8_disp_en>;
                regulator-name = "vcc18_lcd";
@@ -134,14 +134,14 @@
 
        volum_down {
                label = "Volum_down";
-               gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+               gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
                linux,code = <KEY_VOLUMEDOWN>;
                debounce-interval = <100>;
        };
 
        volum_up {
                label = "Volum_up";
-               gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+               gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
                linux,code = <KEY_VOLUMEUP>;
                debounce-interval = <100>;
        };
@@ -165,10 +165,10 @@
                compatible = "elan,ekth3500";
                reg = <0x10>;
                interrupt-parent = <&gpio2>;
-               interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+               interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
                pinctrl-names = "default";
                pinctrl-0 = <&touch_int &touch_rst>;
-               reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+               reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
                vcc33-supply = <&vcc33_touch>;
                vccio-supply = <&vcc33_touch>;
        };
@@ -211,14 +211,14 @@
 
 &vcc_5v {
        enable-active-high;
-       gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+       gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
        pinctrl-names = "default";
        pinctrl-0 = <&drv_5v>;
 };
 
 &vcc50_hdmi {
        enable-active-high;
-       gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+       gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
        pinctrl-names = "default";
        pinctrl-0 = <&vcc50_hdmi_en>;
 };