* SMSC SCH3112, SCH3114, SCH3116
Prefix: 'sch311x'
Addresses scanned: none, address read from Super-I/O config space
- Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+ Datasheet: Available on the Internet
+ * SMSC SCH5027
+ Prefix: 'sch5027'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: Provided by SMSC upon request and under NDA
+ * SMSC SCH5127
+ Prefix: 'sch5127'
+ Addresses scanned: none, address read from Super-I/O config space
+ Datasheet: Provided by SMSC upon request and under NDA
Authors:
Juerg Haefliger <juergh@gmail.com>
following boards:
- VIA EPIA SN18000
-Note that there is no need to use this parameter if the driver loads without
-complaining. The driver will say so if it is necessary.
-
Description
-----------
This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O
-chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote
-diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up
-to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM
-outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
+temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
+1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
+up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
automatically.
-For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6]
-and pwm[3,5-6] are optional features and their availability depends on the
-configuration of the chip. The driver will detect which features are present
-during initialization and create the sysfs attributes accordingly.
+For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present.
+Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
+the configuration of the chip. The driver will detect which features are
+present during initialization and create the sysfs attributes accordingly.
-For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
-pwm[5-6] don't exist.
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
-The hardware monitoring features of the DME1737 and A8000 are only accessible
-via SMBus, while the SCH311x only provides access via the ISA bus. The driver
-will therefore register itself as an I2C client driver if it detects a DME1737
-or A8000 and as a platform driver if it detects a SCH311x chip.
+The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
Voltage Monitoring
millivolts and don't need scaling. The voltage inputs are mapped as follows
(the last column indicates the input ranges):
+DME1737, A8000:
in0: +5VTR (+5V standby) 0V - 6.64V
in1: Vccp (processor core) 0V - 3V
in2: VCC (internal +3.3V) 0V - 4.38V
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
+SCH311x:
+ in0: +2.5V 0V - 3.32V
+ in1: Vccp (processor core) 0V - 2V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: +5V 0V - 6.64V
+ in4: +12V 0V - 16V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
+SCH5027:
+ in0: +5VTR (+5V standby) 0V - 6.64V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: V2_IN 0V - 1.5V
+ in4: V1_IN 0V - 1.5V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
+SCH5127:
+ in0: +2.5 0V - 3.32V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: V2_IN 0V - 1.5V
+ in4: V1_IN 0V - 1.5V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the
full-speed duty-cycle which is hard-
wired to 255 (100% duty-cycle).
+
+Chip Differences
+----------------
+
+Feature dme1737 sch311x sch5027 sch5127
+-------------------------------------------------------
+temp[1-3]_offset yes yes
+vid yes
+zone3 yes yes yes
+zone[1-3]_hyst yes yes
+pwm min/off yes yes
+fan3 opt yes opt yes
+pwm3 opt yes opt yes
+fan4 opt opt
+fan5 opt opt
+pwm5 opt opt
+fan6 opt opt
+pwm6 opt opt