2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 /* logged when starting the various Samba daemons */
31 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2005"
34 #if defined(LARGE_SMB_OFF_T)
35 #define BUFFER_SIZE (128*1024)
36 #else /* no large readwrite possible */
37 #define BUFFER_SIZE (0xFFFF)
40 #define SAFETY_MARGIN 1024
41 #define LARGE_WRITEX_HDR_SIZE 65
44 #define DGRAM_PORT 138
47 #define SMB_PORTS "445 139"
49 #define Undefined (-1)
57 #define _BOOL /* So we don't typedef BOOL again in vfs.h */
62 #ifndef DEF_CREATE_MASK
63 #define DEF_CREATE_MASK (0755)
66 /* string manipulation flags - see clistr.c and srvstr.c */
67 #define STR_TERMINATE 1
71 #define STR_NOALIGN 16
72 #define STR_TERMINATE_ASCII 128
74 /* how long to wait for secondary SMB packets (milli-seconds) */
75 #define SMB_SECONDARY_WAIT (60*1000)
80 /* this defines the error codes that receive_smb can put in smb_read_error */
81 #define READ_TIMEOUT 1
84 #define WRITE_ERROR 4 /* This error code can go into the client smb_rw_error. */
85 #define READ_BAD_SIG 5
86 #define DO_NOT_DO_TDIS 6 /* cli_close_connection() check for this when smbfs wants to keep tree connected */
88 #define DIR_STRUCT_SIZE 43
90 /* these define the attribute byte as seen by DOS */
91 #define aRONLY (1L<<0) /* 0x01 */
92 #define aHIDDEN (1L<<1) /* 0x02 */
93 #define aSYSTEM (1L<<2) /* 0x04 */
94 #define aVOLID (1L<<3) /* 0x08 */
95 #define aDIR (1L<<4) /* 0x10 */
96 #define aARCH (1L<<5) /* 0x20 */
107 #define DOS_OPEN_RDONLY 0
108 #define DOS_OPEN_WRONLY 1
109 #define DOS_OPEN_RDWR 2
110 #define DOS_OPEN_EXEC 3
111 #define DOS_OPEN_FCB 0xF
113 /* define shifts and masks for share and open modes. */
114 #define OPENX_MODE_MASK 0xF
115 #define DENY_MODE_SHIFT 4
116 #define DENY_MODE_MASK 0x7
117 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
118 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
119 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
120 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
122 /* Sync on open file (not sure if used anymore... ?) */
123 #define FILE_SYNC_OPENMODE (1<<14)
124 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
126 /* open disposition values */
127 #define OPENX_FILE_EXISTS_FAIL 0
128 #define OPENX_FILE_EXISTS_OPEN 1
129 #define OPENX_FILE_EXISTS_TRUNCATE 2
131 /* mask for open disposition. */
132 #define OPENX_FILE_OPEN_MASK 0x3
134 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
135 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
137 /* The above can be OR'ed with... */
138 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
139 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
142 #define STYPE_DISKTREE 0 /* Disk drive */
143 #define STYPE_PRINTQ 1 /* Spooler queue */
144 #define STYPE_DEVICE 2 /* Serial device */
145 #define STYPE_IPC 3 /* Interprocess communication (IPC) */
146 #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */
150 typedef union unid_t {
156 * SMB UCS2 (16-bit unicode) internal type.
157 * smb_ucs2_t is *always* in little endian format.
160 typedef uint16 smb_ucs2_t;
162 /* ucs2 string types. */
163 typedef smb_ucs2_t wpstring[PSTRING_LEN];
164 typedef smb_ucs2_t wfstring[FSTRING_LEN];
166 #ifdef WORDS_BIGENDIAN
172 /* turn a 7 bit character into a ucs2 character */
173 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
175 /* return an ascii version of a ucs2 character */
176 #define UCS2_TO_CHAR(c) ((c) & 0xff)
178 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
179 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
180 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
182 /* pipe string names */
183 #define PIPE_LANMAN "\\PIPE\\LANMAN"
184 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
185 #define PIPE_SAMR "\\PIPE\\samr"
186 #define PIPE_WINREG "\\PIPE\\winreg"
187 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
188 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
189 #define PIPE_NTLSA "\\PIPE\\ntlsa"
190 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
191 #define PIPE_LSASS "\\PIPE\\lsass"
192 #define PIPE_LSARPC "\\PIPE\\lsarpc"
193 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
194 #define PIPE_NETDFS "\\PIPE\\netdfs"
195 #define PIPE_ECHO "\\PIPE\\rpcecho"
196 #define PIPE_SHUTDOWN "\\PIPE\\initshutdown"
197 #define PIPE_EPM "\\PIPE\\epmapper"
198 #define PIPE_SVCCTL "\\PIPE\\svcctl"
199 #define PIPE_EVENTLOG "\\PIPE\\eventlog"
201 #define PIPE_NETLOGON_PLAIN "\\NETLOGON"
204 #define PI_LSARPC_DS 1
206 #define PI_NETLOGON 3
213 #define PI_SHUTDOWN 10
215 #define PI_EVENTLOG 12
217 #define PI_MAX_PIPES 14
219 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
220 typedef struct nttime_info {
226 /* Allowable account control bits */
227 #define ACB_DISABLED 0x0001 /* 1 = User account disabled */
228 #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */
229 #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */
230 #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */
231 #define ACB_NORMAL 0x0010 /* 1 = Normal user account */
232 #define ACB_MNS 0x0020 /* 1 = MNS logon user account */
233 #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */
234 #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */
235 #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account (BDC) */
236 #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */
237 #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */
239 #define MAX_HOURS_LEN 32
242 * window during which we must talk to the PDC to avoid
243 * sam sync delays; expressed in seconds (15 minutes is the
244 * default period for SAM replication under Windows NT 4.0
246 #define SAM_SYNC_WINDOW 900
250 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
253 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
258 SID_NAME_USE_NONE = 0,
259 SID_NAME_USER = 1, /* user */
260 SID_NAME_DOM_GRP, /* domain group */
261 SID_NAME_DOMAIN, /* domain sid */
262 SID_NAME_ALIAS, /* local group */
263 SID_NAME_WKN_GRP, /* well-known group */
264 SID_NAME_DELETED, /* deleted account: needed for c2 rating */
265 SID_NAME_INVALID, /* invalid account */
266 SID_NAME_UNKNOWN, /* unknown sid type */
267 SID_NAME_COMPUTER /* sid for a computer */
270 #define LOOKUP_NAME_ISOLATED 1 /* Look up unqualified names */
271 #define LOOKUP_NAME_REMOTE 2 /* Ask others */
272 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED|LOOKUP_NAME_REMOTE)
275 * @brief Security Identifier
277 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
279 typedef struct sid_info
281 uint8 sid_rev_num; /**< SID revision number */
282 uint8 num_auths; /**< Number of sub-authorities */
283 uint8 id_auth[6]; /**< Identifier Authority */
285 * Pointer to sub-authorities.
287 * @note The values in these uint32's are in *native* byteorder, not
288 * neccessarily little-endian...... JRA.
290 uint32 sub_auths[MAXSUBAUTHS];
294 /* Some well-known SIDs */
295 extern const DOM_SID global_sid_World_Domain;
296 extern const DOM_SID global_sid_World;
297 extern const DOM_SID global_sid_Creator_Owner_Domain;
298 extern const DOM_SID global_sid_NT_Authority;
299 extern const DOM_SID global_sid_System;
300 extern const DOM_SID global_sid_NULL;
301 extern const DOM_SID global_sid_Authenticated_Users;
302 extern const DOM_SID global_sid_Network;
303 extern const DOM_SID global_sid_Creator_Owner;
304 extern const DOM_SID global_sid_Creator_Group;
305 extern const DOM_SID global_sid_Anonymous;
306 extern const DOM_SID global_sid_Builtin;
307 extern const DOM_SID global_sid_Builtin_Administrators;
308 extern const DOM_SID global_sid_Builtin_Users;
309 extern const DOM_SID global_sid_Builtin_Guests;
310 extern const DOM_SID global_sid_Builtin_Power_Users;
311 extern const DOM_SID global_sid_Builtin_Account_Operators;
312 extern const DOM_SID global_sid_Builtin_Server_Operators;
313 extern const DOM_SID global_sid_Builtin_Print_Operators;
314 extern const DOM_SID global_sid_Builtin_Backup_Operators;
315 extern const DOM_SID global_sid_Builtin_Replicator;
318 * The complete list of SIDS belonging to this user.
319 * Created when a vuid is registered.
320 * The definition of the user_sids array is as follows :
322 * token->user_sids[0] = primary user SID.
323 * token->user_sids[1] = primary group SID.
324 * token->user_sids[2..num_sids] = supplementary group SIDS.
327 #define PRIMARY_USER_SID_INDEX 0
328 #define PRIMARY_GROUP_SID_INDEX 1
330 typedef struct _nt_user_token {
336 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
337 typedef struct time_info
342 /* Structure used when SMBwritebmpx is active */
344 size_t wr_total_written; /* So we know when to discard this */
346 int32 wr_errclass; /* Cached errors */
347 int32 wr_error; /* Cached errors */
348 NTSTATUS wr_status; /* Cached errors */
349 BOOL wr_mode; /* write through mode) */
350 BOOL wr_discard; /* discard all further data */
353 typedef struct write_cache
364 smb_ucs2_t *origname;
365 smb_ucs2_t *filename;
366 SMB_STRUCT_STAT *statinfo;
369 #include "fake_file.h"
374 SMB_BIG_UINT position_information;
376 uint32 private_options; /* NT Create options, but we only look at
377 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
378 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
379 * for print files *only*, where
380 * DELETE_ON_CLOSE is not stored in the share
387 struct share_mode_entry;
389 typedef struct files_struct {
390 struct files_struct *next, *prev;
392 struct connection_struct *conn;
393 struct fd_handle *fh;
394 unsigned int num_smb_operations;
395 uint16 rap_print_jobid;
398 SMB_BIG_UINT initial_allocation_size; /* Faked up initial allocation on disk. */
402 write_bmpx_struct *wbmpx_ptr;
404 struct timeval open_time;
405 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
406 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
407 BOOL pending_modtime_owner;
408 time_t pending_modtime;
409 time_t last_write_time;
411 int sent_oplock_break;
412 struct timed_event *oplock_timeout;
414 struct share_mode_entry *pending_break_messages;
415 int num_pending_break_messages;
417 unsigned long file_id;
425 BOOL aio_write_behind;
427 FAKE_FILE_HANDLE *fake_file_handle;
430 #include "ntquotas.h"
431 #include "sysquotas.h"
433 /* used to hold an arbitrary blob of data */
434 typedef struct data_blob_ {
437 void (*free)(struct data_blob_ *data_blob);
441 * Structure used to keep directory state information around.
442 * Used in NT change-notify code.
451 struct vuid_cache_entry
460 unsigned int entries;
461 struct vuid_cache_entry array[VUID_CACHE_SIZE];
468 } name_compare_entry;
470 /* Include VFS stuff */
472 #include "smb_acls.h"
475 struct dfree_cached_info {
476 time_t last_dfree_time;
477 SMB_BIG_UINT dfree_ret;
485 typedef struct connection_struct
487 struct connection_struct *next, *prev;
489 unsigned cnum; /* an index passed over the wire */
493 struct vuid_cache vuid_cache;
494 struct dptr_struct *dirptr;
497 BOOL read_only; /* Attributes for the current user of the share. */
498 BOOL admin_user; /* Attributes for the current user of the share. */
503 struct vfs_ops vfs; /* Filesystem operations */
504 struct vfs_ops vfs_opaque; /* OPAQUE Filesystem operations */
505 struct vfs_handle_struct *vfs_handles; /* for the new plugins */
507 char *user; /* name of user who *opened* this connection */
508 uid_t uid; /* uid of user who *opened* this connection */
509 gid_t gid; /* gid of user who *opened* this connection */
510 char client_address[18]; /* String version of client IP address. */
512 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
514 /* following groups stuff added by ih */
516 /* This groups info is valid for the user that *opened* the connection */
519 NT_USER_TOKEN *nt_user_token;
524 unsigned int num_smb_operations; /* Count of smb operations on this tree. */
528 BOOL short_case_preserve;
530 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
531 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
532 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
533 name_compare_entry *aio_write_behind_list; /* Per-share list of files to use aio write behind on. */
534 struct dfree_cached_info *dfree_info;
539 connection_struct *conn;
545 NT_USER_TOKEN *nt_user_token;
548 /* Defines for the sent_oplock_break field above. */
549 #define NO_BREAK_SENT 0
550 #define BREAK_TO_NONE_SENT 1
551 #define LEVEL_II_BREAK_SENT 2
552 #define ASYNC_LEVEL_II_BREAK_SENT 3
555 fstring smb_name; /* user name from the client */
556 fstring unix_name; /* unix user name of a validated user */
557 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
558 fstring domain; /* domain that the client specified */
561 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
563 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
564 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
566 typedef struct _print_queue_struct
568 int job; /* normally the UNIX jobid -- see note in
569 printing.c:traverse_fn_delete() */
577 } print_queue_struct;
579 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
586 } print_status_struct;
588 /* used for server information: client, nameserv and ipc */
589 struct server_info_struct
594 fstring domain; /* used ONLY in ipc.c NOT namework.c */
595 BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
599 /* used for network interfaces */
602 struct interface *next, *prev;
604 struct in_addr bcast;
605 struct in_addr nmask;
608 /* Internal message queue for deferred opens. */
609 struct pending_message_list {
610 struct pending_message_list *next, *prev;
611 struct timeval request_time; /* When was this first issued? */
612 struct timeval end_time; /* When does this time out? */
614 DATA_BLOB private_data;
617 /* struct returned by get_share_modes */
618 struct share_mode_entry {
619 struct process_id pid;
622 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
623 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
624 uint32 private_options; /* NT Create options, but we only look at
625 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
626 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
627 * smbstatus and swat */
631 unsigned long share_file_id;
634 struct share_mode_lock {
635 const char *servicepath; /* canonicalized. */
636 const char *filename;
640 struct share_mode_entry *share_modes;
641 BOOL delete_on_close;
646 #define NT_HASH_LEN 16
647 #define LM_HASH_LEN 16
649 /* Password history contants. */
650 #define PW_HISTORY_SALT_LEN 16
651 #define SALTED_MD5_HASH_LEN 16
652 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
655 * Flags for account policy.
657 #define AP_MIN_PASSWORD_LEN 1
658 #define AP_PASSWORD_HISTORY 2
659 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
660 #define AP_MAX_PASSWORD_AGE 4
661 #define AP_MIN_PASSWORD_AGE 5
662 #define AP_LOCK_ACCOUNT_DURATION 6
663 #define AP_RESET_COUNT_TIME 7
664 #define AP_BAD_ATTEMPT_LOCKOUT 8
665 #define AP_TIME_TO_LOGOUT 9
666 #define AP_REFUSE_MACHINE_PW_CHANGE 10
669 * Flags for local user manipulation.
672 #define LOCAL_ADD_USER 0x1
673 #define LOCAL_DELETE_USER 0x2
674 #define LOCAL_DISABLE_USER 0x4
675 #define LOCAL_ENABLE_USER 0x8
676 #define LOCAL_TRUST_ACCOUNT 0x10
677 #define LOCAL_SET_NO_PASSWORD 0x20
678 #define LOCAL_SET_PASSWORD 0x40
679 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
680 #define LOCAL_INTERDOM_ACCOUNT 0x100
681 #define LOCAL_AM_ROOT 0x200 /* Act as root */
683 /* key and data in the connections database - used in smbstatus and smbd */
684 struct connections_key {
685 struct process_id pid;
690 struct connections_data {
692 struct process_id pid;
698 char machine[FSTRING_LEN];
700 uint32 bcast_msg_flags;
704 /* the following are used by loadparm for option lists */
706 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
707 P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP
711 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
714 /* passed to br lock code */
715 enum brl_type {READ_LOCK, WRITE_LOCK, PENDING_LOCK};
722 #define BRLOCK_FN_CAST() \
723 void (*)(SMB_DEV_T dev, SMB_INO_T ino, struct process_id pid, \
724 enum brl_type lock_type, \
725 br_off start, br_off size)
726 #define BRLOCK_FN(fn) \
727 void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, struct process_id pid, \
728 enum brl_type lock_type, \
729 br_off start, br_off size)
736 BOOL (*special)(int snum, const char *, char **);
737 const struct enum_list *enum_list;
753 /* The following flags are used in SWAT */
754 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
755 #define FLAG_SHARE 0x0002 /* file sharing options */
756 #define FLAG_PRINT 0x0004 /* printing options */
757 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
758 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
759 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
760 #define FLAG_DEVELOPER 0x0040 /* No longer used */
761 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
762 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
763 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
765 #ifndef LOCKING_VERSION
766 #define LOCKING_VERSION 4
767 #endif /* LOCKING_VERSION */
770 /* the basic packet size, assuming no words or bytes */
773 /* offsets into message for common items */
780 #define smb_pidhigh 16
781 #define smb_ss_field 18
807 /* flag defines. CIFS spec 3.1.1 */
808 #define FLAG_SUPPORT_LOCKREAD 0x01
809 #define FLAG_CLIENT_BUF_AVAIL 0x02
810 #define FLAG_RESERVED 0x04
811 #define FLAG_CASELESS_PATHNAMES 0x08
812 #define FLAG_CANONICAL_PATHNAMES 0x10
813 #define FLAG_REQUEST_OPLOCK 0x20
814 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
815 #define FLAG_REPLY 0x80
818 #define SMBmkdir 0x00 /* create directory */
819 #define SMBrmdir 0x01 /* delete directory */
820 #define SMBopen 0x02 /* open file */
821 #define SMBcreate 0x03 /* create file */
822 #define SMBclose 0x04 /* close file */
823 #define SMBflush 0x05 /* flush file */
824 #define SMBunlink 0x06 /* delete file */
825 #define SMBmv 0x07 /* rename file */
826 #define SMBgetatr 0x08 /* get file attributes */
827 #define SMBsetatr 0x09 /* set file attributes */
828 #define SMBread 0x0A /* read from file */
829 #define SMBwrite 0x0B /* write to file */
830 #define SMBlock 0x0C /* lock byte range */
831 #define SMBunlock 0x0D /* unlock byte range */
832 #define SMBctemp 0x0E /* create temporary file */
833 #define SMBmknew 0x0F /* make new file */
834 #define SMBchkpth 0x10 /* check directory path */
835 #define SMBexit 0x11 /* process exit */
836 #define SMBlseek 0x12 /* seek */
837 #define SMBtcon 0x70 /* tree connect */
838 #define SMBtconX 0x75 /* tree connect and X*/
839 #define SMBtdis 0x71 /* tree disconnect */
840 #define SMBnegprot 0x72 /* negotiate protocol */
841 #define SMBdskattr 0x80 /* get disk attributes */
842 #define SMBsearch 0x81 /* search directory */
843 #define SMBsplopen 0xC0 /* open print spool file */
844 #define SMBsplwr 0xC1 /* write to print spool file */
845 #define SMBsplclose 0xC2 /* close print spool file */
846 #define SMBsplretq 0xC3 /* return print queue */
847 #define SMBsends 0xD0 /* send single block message */
848 #define SMBsendb 0xD1 /* send broadcast message */
849 #define SMBfwdname 0xD2 /* forward user name */
850 #define SMBcancelf 0xD3 /* cancel forward */
851 #define SMBgetmac 0xD4 /* get machine name */
852 #define SMBsendstrt 0xD5 /* send start of multi-block message */
853 #define SMBsendend 0xD6 /* send end of multi-block message */
854 #define SMBsendtxt 0xD7 /* send text of multi-block message */
857 #define SMBlockread 0x13 /* Lock a range and read */
858 #define SMBwriteunlock 0x14 /* Unlock a range then write */
859 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
860 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
861 #define SMBwritec 0x20 /* secondary write request */
862 #define SMBwriteclose 0x2c /* write a file then close it */
864 /* dos extended protocol */
865 #define SMBreadBraw 0x1A /* read block raw */
866 #define SMBreadBmpx 0x1B /* read block multiplexed */
867 #define SMBreadBs 0x1C /* read block (secondary response) */
868 #define SMBwriteBraw 0x1D /* write block raw */
869 #define SMBwriteBmpx 0x1E /* write block multiplexed */
870 #define SMBwriteBs 0x1F /* write block (secondary request) */
871 #define SMBwriteC 0x20 /* write complete response */
872 #define SMBsetattrE 0x22 /* set file attributes expanded */
873 #define SMBgetattrE 0x23 /* get file attributes expanded */
874 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
875 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
876 #define SMBtranss 0x26 /* transaction (secondary request/response) */
877 #define SMBioctl 0x27 /* IOCTL */
878 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
879 #define SMBcopy 0x29 /* copy */
880 #define SMBmove 0x2A /* move */
881 #define SMBecho 0x2B /* echo */
882 #define SMBopenX 0x2D /* open and X */
883 #define SMBreadX 0x2E /* read and X */
884 #define SMBwriteX 0x2F /* write and X */
885 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
886 #define SMBffirst 0x82 /* find first */
887 #define SMBfunique 0x83 /* find unique */
888 #define SMBfclose 0x84 /* find close */
889 #define SMBkeepalive 0x85 /* keepalive */
890 #define SMBinvalid 0xFE /* invalid command */
892 /* Extended 2.0 protocol */
893 #define SMBtrans2 0x32 /* TRANS2 protocol set */
894 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
895 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
896 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
897 #define SMBulogoffX 0x74 /* user logoff */
899 /* NT SMB extensions. */
900 #define SMBnttrans 0xA0 /* NT transact */
901 #define SMBnttranss 0xA1 /* NT transact secondary */
902 #define SMBntcreateX 0xA2 /* NT create and X */
903 #define SMBntcancel 0xA4 /* NT cancel */
904 #define SMBntrename 0xA5 /* NT rename */
906 /* These are the trans subcommands */
907 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
908 #define TRANSACT_DCERPCCMD 0x26
909 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
911 /* These are the TRANS2 sub commands */
912 #define TRANSACT2_OPEN 0x00
913 #define TRANSACT2_FINDFIRST 0x01
914 #define TRANSACT2_FINDNEXT 0x02
915 #define TRANSACT2_QFSINFO 0x03
916 #define TRANSACT2_SETFSINFO 0x04
917 #define TRANSACT2_QPATHINFO 0x05
918 #define TRANSACT2_SETPATHINFO 0x06
919 #define TRANSACT2_QFILEINFO 0x07
920 #define TRANSACT2_SETFILEINFO 0x08
921 #define TRANSACT2_FSCTL 0x09
922 #define TRANSACT2_IOCTL 0x0A
923 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
924 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
925 #define TRANSACT2_MKDIR 0x0D
926 #define TRANSACT2_SESSION_SETUP 0x0E
927 #define TRANSACT2_GET_DFS_REFERRAL 0x10
928 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
930 /* These are the NT transact sub commands. */
931 #define NT_TRANSACT_CREATE 1
932 #define NT_TRANSACT_IOCTL 2
933 #define NT_TRANSACT_SET_SECURITY_DESC 3
934 #define NT_TRANSACT_NOTIFY_CHANGE 4
935 #define NT_TRANSACT_RENAME 5
936 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
937 #define NT_TRANSACT_GET_USER_QUOTA 7
938 #define NT_TRANSACT_SET_USER_QUOTA 8
940 /* These are the NT transact_get_user_quota sub commands */
941 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
942 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
943 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
945 /* Relevant IOCTL codes */
946 #define IOCTL_QUERY_JOB_INFO 0x530060
948 /* these are the trans2 sub fields for primary requests */
949 #define smb_tpscnt smb_vwv0
950 #define smb_tdscnt smb_vwv1
951 #define smb_mprcnt smb_vwv2
952 #define smb_mdrcnt smb_vwv3
953 #define smb_msrcnt smb_vwv4
954 #define smb_flags smb_vwv5
955 #define smb_timeout smb_vwv6
956 #define smb_pscnt smb_vwv9
957 #define smb_psoff smb_vwv10
958 #define smb_dscnt smb_vwv11
959 #define smb_dsoff smb_vwv12
960 #define smb_suwcnt smb_vwv13
961 #define smb_setup smb_vwv14
962 #define smb_setup0 smb_setup
963 #define smb_setup1 (smb_setup+2)
964 #define smb_setup2 (smb_setup+4)
966 /* these are for the secondary requests */
967 #define smb_spscnt smb_vwv2
968 #define smb_spsoff smb_vwv3
969 #define smb_spsdisp smb_vwv4
970 #define smb_sdscnt smb_vwv5
971 #define smb_sdsoff smb_vwv6
972 #define smb_sdsdisp smb_vwv7
973 #define smb_sfid smb_vwv8
975 /* and these for responses */
976 #define smb_tprcnt smb_vwv0
977 #define smb_tdrcnt smb_vwv1
978 #define smb_prcnt smb_vwv3
979 #define smb_proff smb_vwv4
980 #define smb_prdisp smb_vwv5
981 #define smb_drcnt smb_vwv6
982 #define smb_droff smb_vwv7
983 #define smb_drdisp smb_vwv8
985 /* these are for the NT trans primary request. */
986 #define smb_nt_MaxSetupCount smb_vwv0
987 #define smb_nt_Flags (smb_vwv0 + 1)
988 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
989 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
990 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
991 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
992 #define smb_nt_ParameterCount (smb_vwv0 + 19)
993 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
994 #define smb_nt_DataCount (smb_vwv0 + 27)
995 #define smb_nt_DataOffset (smb_vwv0 + 31)
996 #define smb_nt_SetupCount (smb_vwv0 + 35)
997 #define smb_nt_Function (smb_vwv0 + 36)
998 #define smb_nt_SetupStart (smb_vwv0 + 38)
1000 /* these are for the NT trans secondary request. */
1001 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1002 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1003 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1004 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1005 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1006 #define smb_nts_DataCount (smb_vwv0 + 23)
1007 #define smb_nts_DataOffset (smb_vwv0 + 27)
1008 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1010 /* these are for the NT trans reply. */
1011 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1012 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1013 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1014 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1015 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1016 #define smb_ntr_DataCount (smb_vwv0 + 23)
1017 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1018 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1020 /* these are for the NT create_and_X */
1021 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1022 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1023 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1024 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1025 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1026 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1027 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1028 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1029 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1030 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1031 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1033 /* this is used on a TConX. I'm not sure the name is very helpful though */
1034 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1035 #define SMB_SHARE_IN_DFS 0x0002
1037 /* Named pipe write mode flags. Used in writeX calls. */
1038 #define PIPE_RAW_MODE 0x4
1039 #define PIPE_START_MESSAGE 0x8
1041 /* File Specific access rights */
1042 #define FILE_READ_DATA 0x00000001
1043 #define FILE_WRITE_DATA 0x00000002
1044 #define FILE_APPEND_DATA 0x00000004
1045 #define FILE_READ_EA 0x00000008 /* File and directory */
1046 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1047 #define FILE_EXECUTE 0x00000020
1048 #define FILE_DELETE_CHILD 0x00000040
1049 #define FILE_READ_ATTRIBUTES 0x00000080
1050 #define FILE_WRITE_ATTRIBUTES 0x00000100
1052 #define FILE_ALL_ACCESS 0x000001FF
1054 /* Directory specific access rights */
1055 #define FILE_LIST_DIRECTORY 0x00000001
1056 #define FILE_ADD_FILE 0x00000002
1057 #define FILE_ADD_SUBDIRECTORY 0x00000004
1058 #define FILE_TRAVERSE 0x00000020
1059 #define FILE_DELETE_CHILD 0x00000040
1061 /* the desired access to use when opening a pipe */
1062 #define DESIRED_ACCESS_PIPE 0x2019f
1064 /* Generic access masks & rights. */
1065 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1066 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1067 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1068 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1069 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1071 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1072 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1073 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1074 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1075 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1076 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1078 /* Mapping of generic access rights for files to specific rights. */
1080 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1082 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1083 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1085 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1086 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1088 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|\
1089 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1091 /* Mapping of access rights to UNIX perms. */
1092 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1093 #define UNIX_ACCESS_R FILE_GENERIC_READ
1094 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1095 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1097 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1098 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1099 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1100 #define UNIX_DIRECTORY_ACCESS_W FILE_GENERIC_WRITE
1101 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1105 * This is the old mapping we used to use. To get W2KSP2 profiles
1106 * working we need to map to the canonical file perms.
1108 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1109 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1110 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1111 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1112 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1113 FILE_APPEND_DATA|FILE_WRITE_DATA)
1114 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1115 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1118 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1121 #define REQUEST_OPLOCK 2
1122 #define REQUEST_BATCH_OPLOCK 4
1123 #define OPEN_DIRECTORY 8
1124 #define EXTENDED_RESPONSE_REQUIRED 0x10
1126 /* ShareAccess field. */
1127 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1128 #define FILE_SHARE_READ 1
1129 #define FILE_SHARE_WRITE 2
1130 #define FILE_SHARE_DELETE 4
1132 /* FileAttributesField */
1133 #define FILE_ATTRIBUTE_READONLY 0x001L
1134 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1135 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1136 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1137 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1138 #define FILE_ATTRIBUTE_NORMAL 0x080L
1139 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1140 #define FILE_ATTRIBUTE_SPARSE 0x200L
1141 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1142 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1143 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1144 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1145 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1146 #define SAMBA_ATTRIBUTES_MASK 0x7F
1148 /* Flags - combined with attributes. */
1149 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1150 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1151 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1152 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1153 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1154 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1155 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1157 /* CreateDisposition field. */
1158 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1159 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1160 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1161 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1162 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1163 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1165 /* CreateOptions field. */
1166 #define FILE_DIRECTORY_FILE 0x0001
1167 #define FILE_WRITE_THROUGH 0x0002
1168 #define FILE_SEQUENTIAL_ONLY 0x0004
1169 #define FILE_NON_DIRECTORY_FILE 0x0040
1170 #define FILE_NO_EA_KNOWLEDGE 0x0200
1171 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1172 #define FILE_RANDOM_ACCESS 0x0800
1173 #define FILE_DELETE_ON_CLOSE 0x1000
1174 #define FILE_OPEN_BY_FILE_ID 0x2000
1176 /* Private create options used by the ntcreatex processing code. From Samba4. */
1177 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x01000000
1178 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x02000000
1180 /* Responses when opening a file. */
1181 #define FILE_WAS_SUPERSEDED 0
1182 #define FILE_WAS_OPENED 1
1183 #define FILE_WAS_CREATED 2
1184 #define FILE_WAS_OVERWRITTEN 3
1186 /* File type flags */
1187 #define FILE_TYPE_DISK 0
1188 #define FILE_TYPE_BYTE_MODE_PIPE 1
1189 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1190 #define FILE_TYPE_PRINTER 3
1191 #define FILE_TYPE_COMM_DEVICE 4
1192 #define FILE_TYPE_UNKNOWN 0xFFFF
1194 /* Flag for NT transact rename call. */
1195 #define RENAME_REPLACE_IF_EXISTS 1
1197 /* flags for SMBntrename call (from Samba4) */
1198 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1199 #define RENAME_FLAG_HARD_LINK 0x103
1200 #define RENAME_FLAG_RENAME 0x104
1201 #define RENAME_FLAG_COPY 0x105
1203 /* Filesystem Attributes. */
1204 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1205 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1206 #define FILE_UNICODE_ON_DISK 0x00000004
1207 /* According to cifs9f, this is 4, not 8 */
1208 /* Acconding to testing, this actually sets the security attribute! */
1209 #define FILE_PERSISTENT_ACLS 0x00000008
1210 #define FILE_FILE_COMPRESSION 0x00000010
1211 #define FILE_VOLUME_QUOTAS 0x00000020
1212 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1213 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1214 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1215 #define FS_LFN_APIS 0x00004000
1216 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1217 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1218 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1219 #define FILE_NAMED_STREAMS 0x00040000
1220 #define FILE_READ_ONLY_VOLUME 0x00080000
1222 /* ChangeNotify flags. */
1223 #define FILE_NOTIFY_CHANGE_FILE 0x001
1224 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1225 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1226 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1227 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1228 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1229 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1230 #define FILE_NOTIFY_CHANGE_EA 0x080
1231 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1232 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x200
1234 /* where to find the base of the SMB packet proper */
1235 #define smb_base(buf) (((char *)(buf))+4)
1237 /* we don't allow server strings to be longer than 48 characters as
1238 otherwise NT will not honour the announce packets */
1239 #define MAX_SERVER_STRING_LENGTH 48
1242 #define SMB_SUCCESS 0 /* The request was successful. */
1245 void dfs_unlogin(void);
1246 extern int dcelogin_atmost_once;
1250 char *strdup(char *s);
1254 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1261 /* these are used in NetServerEnum to choose what to receive */
1262 #define SV_TYPE_WORKSTATION 0x00000001
1263 #define SV_TYPE_SERVER 0x00000002
1264 #define SV_TYPE_SQLSERVER 0x00000004
1265 #define SV_TYPE_DOMAIN_CTRL 0x00000008
1266 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010
1267 #define SV_TYPE_TIME_SOURCE 0x00000020
1268 #define SV_TYPE_AFP 0x00000040
1269 #define SV_TYPE_NOVELL 0x00000080
1270 #define SV_TYPE_DOMAIN_MEMBER 0x00000100
1271 #define SV_TYPE_PRINTQ_SERVER 0x00000200
1272 #define SV_TYPE_DIALIN_SERVER 0x00000400
1273 #define SV_TYPE_SERVER_UNIX 0x00000800
1274 #define SV_TYPE_NT 0x00001000
1275 #define SV_TYPE_WFW 0x00002000
1276 #define SV_TYPE_SERVER_MFPN 0x00004000
1277 #define SV_TYPE_SERVER_NT 0x00008000
1278 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000
1279 #define SV_TYPE_BACKUP_BROWSER 0x00020000
1280 #define SV_TYPE_MASTER_BROWSER 0x00040000
1281 #define SV_TYPE_DOMAIN_MASTER 0x00080000
1282 #define SV_TYPE_SERVER_OSF 0x00100000
1283 #define SV_TYPE_SERVER_VMS 0x00200000
1284 #define SV_TYPE_WIN95_PLUS 0x00400000
1285 #define SV_TYPE_DFS_SERVER 0x00800000
1286 #define SV_TYPE_ALTERNATE_XPORT 0x20000000
1287 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000
1288 #define SV_TYPE_DOMAIN_ENUM 0x80000000
1289 #define SV_TYPE_ALL 0xFFFFFFFF
1291 /* This was set by JHT in liaison with Jeremy Allison early 1997
1293 * Version 4.0 - never made public
1294 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1295 * - Reappeared in 1.9.16p11 with fixed smbd services
1296 * Version 4.20 - To indicate that nmbd and browsing now works better
1297 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1299 * Note: In the presence of NT4.X do not set above 4.9
1300 * Setting this above 4.9 can have undesired side-effects.
1301 * This may change again in Samba-3.0 after further testing. JHT
1304 #define DEFAULT_MAJOR_VERSION 0x04
1305 #define DEFAULT_MINOR_VERSION 0x09
1307 /* Browser Election Values */
1308 #define BROWSER_ELECTION_VERSION 0x010f
1309 #define BROWSER_CONSTANT 0xaa55
1311 /* Sercurity mode bits. */
1312 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1313 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1314 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1315 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1317 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1319 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1320 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1321 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1322 #define FLAGS2_IS_LONG_NAME 0x0040
1323 #define FLAGS2_EXTENDED_SECURITY 0x0800
1324 #define FLAGS2_DFS_PATHNAMES 0x1000
1325 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1326 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1327 #define FLAGS2_UNICODE_STRINGS 0x8000
1329 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1331 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1333 #define CAP_RAW_MODE 0x0001
1334 #define CAP_MPX_MODE 0x0002
1335 #define CAP_UNICODE 0x0004
1336 #define CAP_LARGE_FILES 0x0008
1337 #define CAP_NT_SMBS 0x0010
1338 #define CAP_RPC_REMOTE_APIS 0x0020
1339 #define CAP_STATUS32 0x0040
1340 #define CAP_LEVEL_II_OPLOCKS 0x0080
1341 #define CAP_LOCK_AND_READ 0x0100
1342 #define CAP_NT_FIND 0x0200
1343 #define CAP_DFS 0x1000
1344 #define CAP_W2K_SMBS 0x2000
1345 #define CAP_LARGE_READX 0x4000
1346 #define CAP_LARGE_WRITEX 0x8000
1347 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1348 #define CAP_EXTENDED_SECURITY 0x80000000
1350 /* protocol types. It assumes that higher protocols include lower protocols
1352 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1354 /* security levels */
1355 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1366 /* printing types */
1367 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1368 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1369 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2,PRINT_IPRINT
1371 ,PRINT_TEST,PRINT_VLP
1372 #endif /* DEVELOPER */
1375 /* LDAP schema types */
1376 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1378 /* LDAP SSL options */
1379 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1381 /* LDAP PASSWD SYNC methods */
1382 enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY};
1384 /* Remote architectures we know about. */
1385 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT,
1386 RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_SAMBA, RA_CIFSFS};
1389 enum case_handling {CASE_LOWER,CASE_UPPER};
1392 * Global value meaing that the smb_uid field should be
1393 * ingored (in share level security and protocol level == CORE)
1396 #define UID_FIELD_INVALID 0
1397 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1400 * Size of buffer to use when moving files across filesystems.
1402 #define COPYBUF_SIZE (8*1024)
1405 * Used in chaining code.
1407 extern int chain_size;
1410 * Map the Core and Extended Oplock requesst bits down
1411 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1417 #define CORE_OPLOCK_REQUEST(inbuf) \
1418 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1421 * Extended protocol.
1423 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1426 #define LOCKING_ANDX_SHARED_LOCK 0x1
1427 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1428 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1429 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1430 #define LOCKING_ANDX_LARGE_FILES 0x10
1433 * Bits we test with.
1437 #define EXCLUSIVE_OPLOCK 1
1438 #define BATCH_OPLOCK 2
1439 #define LEVEL_II_OPLOCK 4
1440 #define INTERNAL_OPEN_ONLY 8
1441 #define FAKE_LEVEL_II_OPLOCK 16 /* Client requested no_oplock, but we have to
1442 * inform potential level2 holders on
1444 #define DEFERRED_OPEN_ENTRY 32
1445 #define UNUSED_SHARE_MODE_ENTRY 64
1447 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1448 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1449 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1451 struct inform_level2_message {
1455 unsigned long target_file_id;
1456 unsigned long source_file_id;
1459 struct kernel_oplock_message {
1462 unsigned long file_id;
1465 struct file_renamed_message {
1468 char names[1]; /* A variable area containing sharepath and filename. */
1472 * On the wire return values for oplock types.
1475 #define CORE_OPLOCK_GRANTED (1<<5)
1476 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1478 #define NO_OPLOCK_RETURN 0
1479 #define EXCLUSIVE_OPLOCK_RETURN 1
1480 #define BATCH_OPLOCK_RETURN 2
1481 #define LEVEL_II_OPLOCK_RETURN 3
1484 #define OPLOCKLEVEL_NONE 0
1485 #define OPLOCKLEVEL_II 1
1488 * Capabilities abstracted for different systems.
1491 #define KERNEL_OPLOCK_CAPABILITY 0x1
1493 /* if a kernel does support oplocks then a structure of the following
1494 typee is used to describe how to interact with the kernel */
1495 struct kernel_oplocks {
1496 files_struct * (*receive_message)(fd_set *fds);
1497 BOOL (*set_oplock)(files_struct *fsp, int oplock_type);
1498 void (*release_oplock)(files_struct *fsp);
1499 BOOL (*msg_waiting)(fd_set *fds);
1500 int notification_fd;
1504 /* this structure defines the functions for doing change notify in
1505 various implementations */
1506 struct cnotify_fns {
1507 void * (*register_notify)(connection_struct *conn, char *path, uint32 flags);
1508 BOOL (*check_notify)(connection_struct *conn, uint16 vuid, char *path, uint32 flags, void *data, time_t t);
1509 void (*remove_notify)(void *data);
1515 #include "smb_macros.h"
1517 #define MAX_NETBIOSNAME_LEN 16
1518 /* DOS character, NetBIOS namestring. Type used on the wire. */
1519 typedef char nstring[MAX_NETBIOSNAME_LEN];
1520 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1521 typedef char unstring[MAX_NETBIOSNAME_LEN*4];
1523 /* A netbios name structure. */
1527 unsigned int name_type;
1530 /* A netbios node status array element. */
1531 typedef struct node_status_ {
1534 unsigned char flags;
1535 } NODE_STATUS_STRUCT;
1537 /* The extra info from a NetBIOS node status query */
1538 struct node_status_extra {
1539 unsigned char mac_addr[6];
1540 /* There really is more here ... */
1550 typedef struct user_struct {
1551 struct user_struct *next, *prev;
1552 uint16 vuid; /* Tag for this entry. */
1553 uid_t uid; /* uid of a validated user */
1554 gid_t gid; /* gid of a validated user */
1556 userdom_struct user;
1563 /* following groups stuff added by ih */
1564 /* This groups info is needed for when we become_user() for this uid */
1568 NT_USER_TOKEN *nt_user_token;
1570 DATA_BLOB session_key;
1572 char *session_keystr; /* used by utmp and pam session code.
1576 struct auth_serversupplied_info *server_info;
1578 struct auth_ntlmssp_state *auth_ntlmssp_state;
1583 struct unix_error_map {
1591 * Size of new password account encoding string. This is enough space to
1592 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1593 * Do not change unless you are adding new ACB bits!
1596 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1599 Do you want session setups at user level security with a invalid
1600 password to be rejected or allowed in as guest? WinNT rejects them
1601 but it can be a pain as it means "net view" needs to use a password
1603 You have 3 choices in the setting of map_to_guest:
1605 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1606 are rejected. This is the default.
1608 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1609 are rejected, unless the username does not exist, in which case it
1610 is treated as a guest login
1612 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1613 are treated as a guest login
1615 Note that map_to_guest only has an effect in user or server
1619 #define NEVER_MAP_TO_GUEST 0
1620 #define MAP_TO_GUEST_ON_BAD_USER 1
1621 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1622 #define MAP_TO_GUEST_ON_BAD_UID 3
1624 #define SAFE_NETBIOS_CHARS ". -_"
1626 /* generic iconv conversion structure */
1627 typedef struct _smb_iconv_t {
1628 size_t (*direct)(void *cd, const char **inbuf, size_t *inbytesleft,
1629 char **outbuf, size_t *outbytesleft);
1630 size_t (*pull)(void *cd, const char **inbuf, size_t *inbytesleft,
1631 char **outbuf, size_t *outbytesleft);
1632 size_t (*push)(void *cd, const char **inbuf, size_t *inbytesleft,
1633 char **outbuf, size_t *outbytesleft);
1634 void *cd_direct, *cd_pull, *cd_push;
1635 char *from_name, *to_name;
1638 /* The maximum length of a trust account password.
1639 Used when we randomly create it, 15 char passwords
1640 exceed NT4's max password length */
1642 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1644 #include "popt_common.h"
1648 #define LDAP_PORT 389
1651 /* used by the IP comparison function */
1657 /* Used by the SMB signing functions. */
1659 typedef struct smb_sign_info {
1660 void (*sign_outgoing_message)(char *outbuf, struct smb_sign_info *si);
1661 BOOL (*check_incoming_message)(char *inbuf, struct smb_sign_info *si, BOOL must_be_ok);
1662 void (*free_signing_context)(struct smb_sign_info *si);
1663 void *signing_context;
1665 BOOL negotiated_smb_signing;
1666 BOOL allow_smb_signing;
1668 BOOL mandatory_signing;
1669 BOOL seen_valid; /* Have I ever seen a validly signed packet? */
1679 struct ea_list *next, *prev;
1680 struct ea_struct ea;
1683 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1684 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1685 /* EA to use for DOS attributes */
1686 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1691 uint16 time_hi_and_version;
1695 #define UUID_SIZE 16
1697 #define UUID_FLAT_SIZE 16
1698 typedef struct uuid_flat {
1699 uint8 info[UUID_FLAT_SIZE];
1702 /* map readonly options */
1703 enum mapreadonly_options {MAP_READONLY_NO, MAP_READONLY_YES, MAP_READONLY_PERMISSIONS};