ovl: fix typo in MODULE_PARM_DESC
[sfrench/cifs-2.6.git] / fs / xfs / xfs_discard.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2010 Red Hat, Inc.
4  * All Rights Reserved.
5  */
6 #include "xfs.h"
7 #include "xfs_format.h"
8 #include "xfs_log_format.h"
9 #include "xfs_trans_resv.h"
10 #include "xfs_sb.h"
11 #include "xfs_mount.h"
12 #include "xfs_quota.h"
13 #include "xfs_inode.h"
14 #include "xfs_btree.h"
15 #include "xfs_alloc_btree.h"
16 #include "xfs_alloc.h"
17 #include "xfs_error.h"
18 #include "xfs_extent_busy.h"
19 #include "xfs_discard.h"
20 #include "xfs_trace.h"
21 #include "xfs_log.h"
22
23 STATIC int
24 xfs_trim_extents(
25         struct xfs_mount        *mp,
26         xfs_agnumber_t          agno,
27         xfs_daddr_t             start,
28         xfs_daddr_t             end,
29         xfs_daddr_t             minlen,
30         uint64_t                *blocks_trimmed)
31 {
32         struct block_device     *bdev = mp->m_ddev_targp->bt_bdev;
33         struct xfs_btree_cur    *cur;
34         struct xfs_buf          *agbp;
35         struct xfs_perag        *pag;
36         int                     error;
37         int                     i;
38
39         pag = xfs_perag_get(mp, agno);
40
41         /*
42          * Force out the log.  This means any transactions that might have freed
43          * space before we take the AGF buffer lock are now on disk, and the
44          * volatile disk cache is flushed.
45          */
46         xfs_log_force(mp, XFS_LOG_SYNC);
47
48         error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
49         if (error || !agbp)
50                 goto out_put_perag;
51
52         cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
53
54         /*
55          * Look up the longest btree in the AGF and start with it.
56          */
57         error = xfs_alloc_lookup_ge(cur, 0,
58                             be32_to_cpu(XFS_BUF_TO_AGF(agbp)->agf_longest), &i);
59         if (error)
60                 goto out_del_cursor;
61
62         /*
63          * Loop until we are done with all extents that are large
64          * enough to be worth discarding.
65          */
66         while (i) {
67                 xfs_agblock_t   fbno;
68                 xfs_extlen_t    flen;
69                 xfs_daddr_t     dbno;
70                 xfs_extlen_t    dlen;
71
72                 error = xfs_alloc_get_rec(cur, &fbno, &flen, &i);
73                 if (error)
74                         goto out_del_cursor;
75                 XFS_WANT_CORRUPTED_GOTO(mp, i == 1, out_del_cursor);
76                 ASSERT(flen <= be32_to_cpu(XFS_BUF_TO_AGF(agbp)->agf_longest));
77
78                 /*
79                  * use daddr format for all range/len calculations as that is
80                  * the format the range/len variables are supplied in by
81                  * userspace.
82                  */
83                 dbno = XFS_AGB_TO_DADDR(mp, agno, fbno);
84                 dlen = XFS_FSB_TO_BB(mp, flen);
85
86                 /*
87                  * Too small?  Give up.
88                  */
89                 if (dlen < minlen) {
90                         trace_xfs_discard_toosmall(mp, agno, fbno, flen);
91                         goto out_del_cursor;
92                 }
93
94                 /*
95                  * If the extent is entirely outside of the range we are
96                  * supposed to discard skip it.  Do not bother to trim
97                  * down partially overlapping ranges for now.
98                  */
99                 if (dbno + dlen < start || dbno > end) {
100                         trace_xfs_discard_exclude(mp, agno, fbno, flen);
101                         goto next_extent;
102                 }
103
104                 /*
105                  * If any blocks in the range are still busy, skip the
106                  * discard and try again the next time.
107                  */
108                 if (xfs_extent_busy_search(mp, agno, fbno, flen)) {
109                         trace_xfs_discard_busy(mp, agno, fbno, flen);
110                         goto next_extent;
111                 }
112
113                 trace_xfs_discard_extent(mp, agno, fbno, flen);
114                 error = blkdev_issue_discard(bdev, dbno, dlen, GFP_NOFS, 0);
115                 if (error)
116                         goto out_del_cursor;
117                 *blocks_trimmed += flen;
118
119 next_extent:
120                 error = xfs_btree_decrement(cur, 0, &i);
121                 if (error)
122                         goto out_del_cursor;
123
124                 if (fatal_signal_pending(current)) {
125                         error = -ERESTARTSYS;
126                         goto out_del_cursor;
127                 }
128         }
129
130 out_del_cursor:
131         xfs_btree_del_cursor(cur, error);
132         xfs_buf_relse(agbp);
133 out_put_perag:
134         xfs_perag_put(pag);
135         return error;
136 }
137
138 /*
139  * trim a range of the filesystem.
140  *
141  * Note: the parameters passed from userspace are byte ranges into the
142  * filesystem which does not match to the format we use for filesystem block
143  * addressing. FSB addressing is sparse (AGNO|AGBNO), while the incoming format
144  * is a linear address range. Hence we need to use DADDR based conversions and
145  * comparisons for determining the correct offset and regions to trim.
146  */
147 int
148 xfs_ioc_trim(
149         struct xfs_mount                *mp,
150         struct fstrim_range __user      *urange)
151 {
152         struct request_queue    *q = bdev_get_queue(mp->m_ddev_targp->bt_bdev);
153         unsigned int            granularity = q->limits.discard_granularity;
154         struct fstrim_range     range;
155         xfs_daddr_t             start, end, minlen;
156         xfs_agnumber_t          start_agno, end_agno, agno;
157         uint64_t                blocks_trimmed = 0;
158         int                     error, last_error = 0;
159
160         if (!capable(CAP_SYS_ADMIN))
161                 return -EPERM;
162         if (!blk_queue_discard(q))
163                 return -EOPNOTSUPP;
164
165         /*
166          * We haven't recovered the log, so we cannot use our bnobt-guided
167          * storage zapping commands.
168          */
169         if (mp->m_flags & XFS_MOUNT_NORECOVERY)
170                 return -EROFS;
171
172         if (copy_from_user(&range, urange, sizeof(range)))
173                 return -EFAULT;
174
175         range.minlen = max_t(u64, granularity, range.minlen);
176         minlen = BTOBB(range.minlen);
177         /*
178          * Truncating down the len isn't actually quite correct, but using
179          * BBTOB would mean we trivially get overflows for values
180          * of ULLONG_MAX or slightly lower.  And ULLONG_MAX is the default
181          * used by the fstrim application.  In the end it really doesn't
182          * matter as trimming blocks is an advisory interface.
183          */
184         if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) ||
185             range.minlen > XFS_FSB_TO_B(mp, mp->m_ag_max_usable) ||
186             range.len < mp->m_sb.sb_blocksize)
187                 return -EINVAL;
188
189         start = BTOBB(range.start);
190         end = start + BTOBBT(range.len) - 1;
191
192         if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1)
193                 end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1;
194
195         start_agno = xfs_daddr_to_agno(mp, start);
196         end_agno = xfs_daddr_to_agno(mp, end);
197
198         for (agno = start_agno; agno <= end_agno; agno++) {
199                 error = xfs_trim_extents(mp, agno, start, end, minlen,
200                                           &blocks_trimmed);
201                 if (error) {
202                         last_error = error;
203                         if (error == -ERESTARTSYS)
204                                 break;
205                 }
206         }
207
208         if (last_error)
209                 return last_error;
210
211         range.len = XFS_FSB_TO_B(mp, blocks_trimmed);
212         if (copy_to_user(urange, &range, sizeof(range)))
213                 return -EFAULT;
214         return 0;
215 }