drivers/usb/serial/f81534.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * F81532/F81534 USB to Serial Ports Bridge
   4  *
   5  * F81532 => 2 Serial Ports
   6  * F81534 => 4 Serial Ports
   7  *
   8  * Copyright (C) 2016 Feature Integration Technology Inc., (Fintek)
   9  * Copyright (C) 2016 Tom Tsai (Tom_Tsai@fintek.com.tw)
  10  * Copyright (C) 2016 Peter Hong (Peter_Hong@fintek.com.tw)
  11  *
  12  * The F81532/F81534 had 1 control endpoint for setting, 1 endpoint bulk-out
  13  * for all serial port TX and 1 endpoint bulk-in for all serial port read in
  14  * (Read Data/MSR/LSR).
  15  *
  16  * Write URB is fixed with 512bytes, per serial port used 128Bytes.
  17  * It can be described by f81534_prepare_write_buffer()
  18  *
  19  * Read URB is 512Bytes max, per serial port used 128Bytes.
  20  * It can be described by f81534_process_read_urb() and maybe received with
  21  * 128x1,2,3,4 bytes.
  22  *
  23  */
  24 #include <linux/slab.h>
  25 #include <linux/tty.h>
  26 #include <linux/tty_flip.h>
  27 #include <linux/usb.h>
  28 #include <linux/usb/serial.h>
  29 #include <linux/serial_reg.h>
  30 #include <linux/module.h>
  31 #include <linux/uaccess.h>
  32
  33 /* Serial Port register Address */
  34 #define F81534_UART_BASE_ADDRESS        0x1200
  35 #define F81534_UART_OFFSET              0x10
  36 #define F81534_DIVISOR_LSB_REG          (0x00 + F81534_UART_BASE_ADDRESS)
  37 #define F81534_DIVISOR_MSB_REG          (0x01 + F81534_UART_BASE_ADDRESS)
  38 #define F81534_INTERRUPT_ENABLE_REG     (0x01 + F81534_UART_BASE_ADDRESS)
  39 #define F81534_FIFO_CONTROL_REG         (0x02 + F81534_UART_BASE_ADDRESS)
  40 #define F81534_LINE_CONTROL_REG         (0x03 + F81534_UART_BASE_ADDRESS)
  41 #define F81534_MODEM_CONTROL_REG        (0x04 + F81534_UART_BASE_ADDRESS)
  42 #define F81534_LINE_STATUS_REG          (0x05 + F81534_UART_BASE_ADDRESS)
  43 #define F81534_MODEM_STATUS_REG         (0x06 + F81534_UART_BASE_ADDRESS)
  44 #define F81534_CLOCK_REG                (0x08 + F81534_UART_BASE_ADDRESS)
  45 #define F81534_CONFIG1_REG              (0x09 + F81534_UART_BASE_ADDRESS)
  46
  47 #define F81534_DEF_CONF_ADDRESS_START   0x3000
  48 #define F81534_DEF_CONF_SIZE            12
  49
  50 #define F81534_CUSTOM_ADDRESS_START     0x2f00
  51 #define F81534_CUSTOM_DATA_SIZE         0x10
  52 #define F81534_CUSTOM_NO_CUSTOM_DATA    0xff
  53 #define F81534_CUSTOM_VALID_TOKEN       0xf0
  54 #define F81534_CONF_OFFSET              1
  55 #define F81534_CONF_INIT_GPIO_OFFSET    4
  56 #define F81534_CONF_WORK_GPIO_OFFSET    8
  57 #define F81534_CONF_GPIO_SHUTDOWN       7
  58 #define F81534_CONF_GPIO_RS232          1
  59
  60 #define F81534_MAX_DATA_BLOCK           64
  61 #define F81534_MAX_BUS_RETRY            20
  62
  63 /* Default URB timeout for USB operations */
  64 #define F81534_USB_MAX_RETRY            10
  65 #define F81534_USB_TIMEOUT              2000
  66 #define F81534_SET_GET_REGISTER         0xA0
  67
  68 #define F81534_NUM_PORT                 4
  69 #define F81534_UNUSED_PORT              0xff
  70 #define F81534_WRITE_BUFFER_SIZE        512
  71
  72 #define DRIVER_DESC                     "Fintek F81532/F81534"
  73 #define FINTEK_VENDOR_ID_1              0x1934
  74 #define FINTEK_VENDOR_ID_2              0x2C42
  75 #define FINTEK_DEVICE_ID                0x1202
  76 #define F81534_MAX_TX_SIZE              124
  77 #define F81534_MAX_RX_SIZE              124
  78 #define F81534_RECEIVE_BLOCK_SIZE       128
  79 #define F81534_MAX_RECEIVE_BLOCK_SIZE   512
  80
  81 #define F81534_TOKEN_RECEIVE            0x01
  82 #define F81534_TOKEN_WRITE              0x02
  83 #define F81534_TOKEN_TX_EMPTY           0x03
  84 #define F81534_TOKEN_MSR_CHANGE         0x04
  85
  86 /*
  87  * We used interal SPI bus to access FLASH section. We must wait the SPI bus to
  88  * idle if we performed any command.
  89  *
  90  * SPI Bus status register: F81534_BUS_REG_STATUS
  91  *      Bit 0/1 : BUSY
  92  *      Bit 2   : IDLE
  93  */
  94 #define F81534_BUS_BUSY                 (BIT(0) | BIT(1))
  95 #define F81534_BUS_IDLE                 BIT(2)
  96 #define F81534_BUS_READ_DATA            0x1004
  97 #define F81534_BUS_REG_STATUS           0x1003
  98 #define F81534_BUS_REG_START            0x1002
  99 #define F81534_BUS_REG_END              0x1001
 100
 101 #define F81534_CMD_READ                 0x03
 102
 103 #define F81534_DEFAULT_BAUD_RATE        9600
 104
 105 #define F81534_PORT_CONF_RS232          0
 106 #define F81534_PORT_CONF_RS485          BIT(0)
 107 #define F81534_PORT_CONF_RS485_INVERT   (BIT(0) | BIT(1))
 108 #define F81534_PORT_CONF_MODE_MASK      GENMASK(1, 0)
 109 #define F81534_PORT_CONF_DISABLE_PORT   BIT(3)
 110 #define F81534_PORT_CONF_NOT_EXIST_PORT BIT(7)
 111 #define F81534_PORT_UNAVAILABLE         \
 112         (F81534_PORT_CONF_DISABLE_PORT | F81534_PORT_CONF_NOT_EXIST_PORT)
 113
 114
 115 #define F81534_1X_RXTRIGGER             0xc3
 116 #define F81534_8X_RXTRIGGER             0xcf
 117
 118 /*
 119  * F81532/534 Clock registers (offset +08h)
 120  *
 121  * Bit0:        UART Enable (always on)
 122  * Bit2-1:      Clock source selector
 123  *                      00: 1.846MHz.
 124  *                      01: 18.46MHz.
 125  *                      10: 24MHz.
 126  *                      11: 14.77MHz.
 127  * Bit4:        Auto direction(RTS) control (RTS pin Low when TX)
 128  * Bit5:        Invert direction(RTS) when Bit4 enabled (RTS pin high when TX)
 129  */
 130
 131 #define F81534_UART_EN                  BIT(0)
 132 #define F81534_CLK_1_846_MHZ            0
 133 #define F81534_CLK_18_46_MHZ            BIT(1)
 134 #define F81534_CLK_24_MHZ               BIT(2)
 135 #define F81534_CLK_14_77_MHZ            (BIT(1) | BIT(2))
 136 #define F81534_CLK_MASK                 GENMASK(2, 1)
 137 #define F81534_CLK_TX_DELAY_1BIT        BIT(3)
 138 #define F81534_CLK_RS485_MODE           BIT(4)
 139 #define F81534_CLK_RS485_INVERT         BIT(5)
 140
 141 static const struct usb_device_id f81534_id_table[] = {
 142         { USB_DEVICE(FINTEK_VENDOR_ID_1, FINTEK_DEVICE_ID) },
 143         { USB_DEVICE(FINTEK_VENDOR_ID_2, FINTEK_DEVICE_ID) },
 144         {}                      /* Terminating entry */
 145 };
 146
 147 #define F81534_TX_EMPTY_BIT             0
 148
 149 struct f81534_serial_private {
 150         u8 conf_data[F81534_DEF_CONF_SIZE];
 151         int tty_idx[F81534_NUM_PORT];
 152         u8 setting_idx;
 153         int opened_port;
 154         struct mutex urb_mutex;
 155 };
 156
 157 struct f81534_port_private {
 158         struct mutex mcr_mutex;
 159         struct mutex lcr_mutex;
 160         struct work_struct lsr_work;
 161         struct usb_serial_port *port;
 162         unsigned long tx_empty;
 163         spinlock_t msr_lock;
 164         u32 baud_base;
 165         u8 shadow_mcr;
 166         u8 shadow_lcr;
 167         u8 shadow_msr;
 168         u8 shadow_clk;
 169         u8 phy_num;
 170 };
 171
 172 struct f81534_pin_data {
 173         const u16 reg_addr;
 174         const u8 reg_mask;
 175 };
 176
 177 struct f81534_port_out_pin {
 178         struct f81534_pin_data pin[3];
 179 };
 180
 181 /* Pin output value for M2/M1/M0(SD) */
 182 static const struct f81534_port_out_pin f81534_port_out_pins[] = {
 183          { { { 0x2ae8, BIT(7) }, { 0x2a90, BIT(5) }, { 0x2a90, BIT(4) } } },
 184          { { { 0x2ae8, BIT(6) }, { 0x2ae8, BIT(0) }, { 0x2ae8, BIT(3) } } },
 185          { { { 0x2a90, BIT(0) }, { 0x2ae8, BIT(2) }, { 0x2a80, BIT(6) } } },
 186          { { { 0x2a90, BIT(3) }, { 0x2a90, BIT(2) }, { 0x2a90, BIT(1) } } },
 187 };
 188
 189 static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
 190 static u8 const clock_table[] = { F81534_CLK_1_846_MHZ, F81534_CLK_14_77_MHZ,
 191                                 F81534_CLK_18_46_MHZ, F81534_CLK_24_MHZ };
 192
 193 static int f81534_logic_to_phy_port(struct usb_serial *serial,
 194                                         struct usb_serial_port *port)
 195 {
 196         struct f81534_serial_private *serial_priv =
 197                         usb_get_serial_data(port->serial);
 198         int count = 0;
 199         int i;
 200
 201         for (i = 0; i < F81534_NUM_PORT; ++i) {
 202                 if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
 203                         continue;
 204
 205                 if (port->port_number == count)
 206                         return i;
 207
 208                 ++count;
 209         }
 210
 211         return -ENODEV;
 212 }
 213
 214 static int f81534_set_register(struct usb_serial *serial, u16 reg, u8 data)
 215 {
 216         struct usb_interface *interface = serial->interface;
 217         struct usb_device *dev = serial->dev;
 218         size_t count = F81534_USB_MAX_RETRY;
 219         int status;
 220         u8 *tmp;
 221
 222         tmp = kmalloc(sizeof(u8), GFP_KERNEL);
 223         if (!tmp)
 224                 return -ENOMEM;
 225
 226         *tmp = data;
 227
 228         /*
 229          * Our device maybe not reply when heavily loading, We'll retry for
 230          * F81534_USB_MAX_RETRY times.
 231          */
 232         while (count--) {
 233                 status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 234                                          F81534_SET_GET_REGISTER,
 235                                          USB_TYPE_VENDOR | USB_DIR_OUT,
 236                                          reg, 0, tmp, sizeof(u8),
 237                                          F81534_USB_TIMEOUT);
 238                 if (status == sizeof(u8)) {
 239                         status = 0;
 240                         break;
 241                 }
 242         }
 243
 244         if (status < 0) {
 245                 dev_err(&interface->dev, "%s: reg: %x data: %x failed: %d\n",
 246                                 __func__, reg, data, status);
 247         }
 248
 249         kfree(tmp);
 250         return status;
 251 }
 252
 253 static int f81534_get_register(struct usb_serial *serial, u16 reg, u8 *data)
 254 {
 255         struct usb_interface *interface = serial->interface;
 256         struct usb_device *dev = serial->dev;
 257         size_t count = F81534_USB_MAX_RETRY;
 258         int status;
 259         u8 *tmp;
 260
 261         tmp = kmalloc(sizeof(u8), GFP_KERNEL);
 262         if (!tmp)
 263                 return -ENOMEM;
 264
 265         /*
 266          * Our device maybe not reply when heavily loading, We'll retry for
 267          * F81534_USB_MAX_RETRY times.
 268          */
 269         while (count--) {
 270                 status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 271                                          F81534_SET_GET_REGISTER,
 272                                          USB_TYPE_VENDOR | USB_DIR_IN,
 273                                          reg, 0, tmp, sizeof(u8),
 274                                          F81534_USB_TIMEOUT);
 275                 if (status > 0) {
 276                         status = 0;
 277                         break;
 278                 } else if (status == 0) {
 279                         status = -EIO;
 280                 }
 281         }
 282
 283         if (status < 0) {
 284                 dev_err(&interface->dev, "%s: reg: %x failed: %d\n", __func__,
 285                                 reg, status);
 286                 goto end;
 287         }
 288
 289         *data = *tmp;
 290
 291 end:
 292         kfree(tmp);
 293         return status;
 294 }
 295
 296 static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,
 297                                         u8 mask, u8 data)
 298 {
 299         int status;
 300         u8 tmp;
 301
 302         status = f81534_get_register(serial, reg, &tmp);
 303         if (status)
 304                 return status;
 305
 306         tmp &= ~mask;
 307         tmp |= (mask & data);
 308
 309         return f81534_set_register(serial, reg, tmp);
 310 }
 311
 312 static int f81534_set_phy_port_register(struct usb_serial *serial, int phy,
 313                                         u16 reg, u8 data)
 314 {
 315         return f81534_set_register(serial, reg + F81534_UART_OFFSET * phy,
 316                                         data);
 317 }
 318
 319 static int f81534_get_phy_port_register(struct usb_serial *serial, int phy,
 320                                         u16 reg, u8 *data)
 321 {
 322         return f81534_get_register(serial, reg + F81534_UART_OFFSET * phy,
 323                                         data);
 324 }
 325
 326 static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
 327                                         u8 data)
 328 {
 329         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 330
 331         return f81534_set_register(port->serial,
 332                         reg + port_priv->phy_num * F81534_UART_OFFSET, data);
 333 }
 334
 335 static int f81534_get_port_register(struct usb_serial_port *port, u16 reg,
 336                                         u8 *data)
 337 {
 338         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 339
 340         return f81534_get_register(port->serial,
 341                         reg + port_priv->phy_num * F81534_UART_OFFSET, data);
 342 }
 343
 344 /*
 345  * If we try to access the internal flash via SPI bus, we should check the bus
 346  * status for every command. e.g., F81534_BUS_REG_START/F81534_BUS_REG_END
 347  */
 348 static int f81534_wait_for_spi_idle(struct usb_serial *serial)
 349 {
 350         size_t count = F81534_MAX_BUS_RETRY;
 351         u8 tmp;
 352         int status;
 353
 354         do {
 355                 status = f81534_get_register(serial, F81534_BUS_REG_STATUS,
 356                                                 &tmp);
 357                 if (status)
 358                         return status;
 359
 360                 if (tmp & F81534_BUS_BUSY)
 361                         continue;
 362
 363                 if (tmp & F81534_BUS_IDLE)
 364                         break;
 365
 366         } while (--count);
 367
 368         if (!count) {
 369                 dev_err(&serial->interface->dev,
 370                                 "%s: timed out waiting for idle SPI bus\n",
 371                                 __func__);
 372                 return -EIO;
 373         }
 374
 375         return f81534_set_register(serial, F81534_BUS_REG_STATUS,
 376                                 tmp & ~F81534_BUS_IDLE);
 377 }
 378
 379 static int f81534_get_spi_register(struct usb_serial *serial, u16 reg,
 380                                         u8 *data)
 381 {
 382         int status;
 383
 384         status = f81534_get_register(serial, reg, data);
 385         if (status)
 386                 return status;
 387
 388         return f81534_wait_for_spi_idle(serial);
 389 }
 390
 391 static int f81534_set_spi_register(struct usb_serial *serial, u16 reg, u8 data)
 392 {
 393         int status;
 394
 395         status = f81534_set_register(serial, reg, data);
 396         if (status)
 397                 return status;
 398
 399         return f81534_wait_for_spi_idle(serial);
 400 }
 401
 402 static int f81534_read_flash(struct usb_serial *serial, u32 address,
 403                                 size_t size, u8 *buf)
 404 {
 405         u8 tmp_buf[F81534_MAX_DATA_BLOCK];
 406         size_t block = 0;
 407         size_t read_size;
 408         size_t count;
 409         int status;
 410         int offset;
 411         u16 reg_tmp;
 412
 413         status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
 414                                         F81534_CMD_READ);
 415         if (status)
 416                 return status;
 417
 418         status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
 419                                         (address >> 16) & 0xff);
 420         if (status)
 421                 return status;
 422
 423         status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
 424                                         (address >> 8) & 0xff);
 425         if (status)
 426                 return status;
 427
 428         status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
 429                                         (address >> 0) & 0xff);
 430         if (status)
 431                 return status;
 432
 433         /* Continuous read mode */
 434         do {
 435                 read_size = min_t(size_t, F81534_MAX_DATA_BLOCK, size);
 436
 437                 for (count = 0; count < read_size; ++count) {
 438                         /* To write F81534_BUS_REG_END when final byte */
 439                         if (size <= F81534_MAX_DATA_BLOCK &&
 440                                         read_size == count + 1)
 441                                 reg_tmp = F81534_BUS_REG_END;
 442                         else
 443                                 reg_tmp = F81534_BUS_REG_START;
 444
 445                         /*
 446                          * Dummy code, force IC to generate a read pulse, the
 447                          * set of value 0xf1 is dont care (any value is ok)
 448                          */
 449                         status = f81534_set_spi_register(serial, reg_tmp,
 450                                         0xf1);
 451                         if (status)
 452                                 return status;
 453
 454                         status = f81534_get_spi_register(serial,
 455                                                 F81534_BUS_READ_DATA,
 456                                                 &tmp_buf[count]);
 457                         if (status)
 458                                 return status;
 459
 460                         offset = count + block * F81534_MAX_DATA_BLOCK;
 461                         buf[offset] = tmp_buf[count];
 462                 }
 463
 464                 size -= read_size;
 465                 ++block;
 466         } while (size);
 467
 468         return 0;
 469 }
 470
 471 static void f81534_prepare_write_buffer(struct usb_serial_port *port, u8 *buf)
 472 {
 473         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 474         int phy_num = port_priv->phy_num;
 475         u8 tx_len;
 476         int i;
 477
 478         /*
 479          * The block layout is fixed with 4x128 Bytes, per 128 Bytes a port.
 480          * index 0: port phy idx (e.g., 0,1,2,3)
 481          * index 1: only F81534_TOKEN_WRITE
 482          * index 2: serial TX out length
 483          * index 3: fix to 0
 484          * index 4~127: serial out data block
 485          */
 486         for (i = 0; i < F81534_NUM_PORT; ++i) {
 487                 buf[i * F81534_RECEIVE_BLOCK_SIZE] = i;
 488                 buf[i * F81534_RECEIVE_BLOCK_SIZE + 1] = F81534_TOKEN_WRITE;
 489                 buf[i * F81534_RECEIVE_BLOCK_SIZE + 2] = 0;
 490                 buf[i * F81534_RECEIVE_BLOCK_SIZE + 3] = 0;
 491         }
 492
 493         tx_len = kfifo_out_locked(&port->write_fifo,
 494                                 &buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 4],
 495                                 F81534_MAX_TX_SIZE, &port->lock);
 496
 497         buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 2] = tx_len;
 498 }
 499
 500 static int f81534_submit_writer(struct usb_serial_port *port, gfp_t mem_flags)
 501 {
 502         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 503         struct urb *urb;
 504         unsigned long flags;
 505         int result;
 506
 507         /* Check is any data in write_fifo */
 508         spin_lock_irqsave(&port->lock, flags);
 509
 510         if (kfifo_is_empty(&port->write_fifo)) {
 511                 spin_unlock_irqrestore(&port->lock, flags);
 512                 return 0;
 513         }
 514
 515         spin_unlock_irqrestore(&port->lock, flags);
 516
 517         /* Check H/W is TXEMPTY */
 518         if (!test_and_clear_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty))
 519                 return 0;
 520
 521         urb = port->write_urbs[0];
 522         f81534_prepare_write_buffer(port, port->bulk_out_buffers[0]);
 523         urb->transfer_buffer_length = F81534_WRITE_BUFFER_SIZE;
 524
 525         result = usb_submit_urb(urb, mem_flags);
 526         if (result) {
 527                 set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
 528                 dev_err(&port->dev, "%s: submit failed: %d\n", __func__,
 529                                 result);
 530                 return result;
 531         }
 532
 533         usb_serial_port_softint(port);
 534         return 0;
 535 }
 536
 537 static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
 538 {
 539         if (!baudrate)
 540                 return 0;
 541
 542         /* Round to nearest divisor */
 543         return DIV_ROUND_CLOSEST(clockrate, baudrate);
 544 }
 545
 546 static int f81534_find_clk(u32 baudrate)
 547 {
 548         int idx;
 549
 550         for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
 551                 if (baudrate <= baudrate_table[idx] &&
 552                                 baudrate_table[idx] % baudrate == 0)
 553                         return idx;
 554         }
 555
 556         return -EINVAL;
 557 }
 558
 559 static int f81534_set_port_config(struct usb_serial_port *port,
 560                 struct tty_struct *tty, u32 baudrate, u32 old_baudrate, u8 lcr)
 561 {
 562         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 563         u32 divisor;
 564         int status;
 565         int i;
 566         int idx;
 567         u8 value;
 568         u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE};
 569
 570         for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
 571                 idx = f81534_find_clk(baud_list[i]);
 572                 if (idx >= 0) {
 573                         baudrate = baud_list[i];
 574                         tty_encode_baud_rate(tty, baudrate, baudrate);
 575                         break;
 576                 }
 577         }
 578
 579         if (idx < 0)
 580                 return -EINVAL;
 581
 582         port_priv->baud_base = baudrate_table[idx];
 583         port_priv->shadow_clk &= ~F81534_CLK_MASK;
 584         port_priv->shadow_clk |= clock_table[idx];
 585
 586         status = f81534_set_port_register(port, F81534_CLOCK_REG,
 587                         port_priv->shadow_clk);
 588         if (status) {
 589                 dev_err(&port->dev, "CLOCK_REG setting failed\n");
 590                 return status;
 591         }
 592
 593         if (baudrate <= 1200)
 594                 value = F81534_1X_RXTRIGGER;    /* 128 FIFO & TL: 1x */
 595         else
 596                 value = F81534_8X_RXTRIGGER;    /* 128 FIFO & TL: 8x */
 597
 598         status = f81534_set_port_register(port, F81534_CONFIG1_REG, value);
 599         if (status) {
 600                 dev_err(&port->dev, "%s: CONFIG1 setting failed\n", __func__);
 601                 return status;
 602         }
 603
 604         if (baudrate <= 1200)
 605                 value = UART_FCR_TRIGGER_1 | UART_FCR_ENABLE_FIFO; /* TL: 1 */
 606         else
 607                 value = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO; /* TL: 8 */
 608
 609         status = f81534_set_port_register(port, F81534_FIFO_CONTROL_REG,
 610                                                 value);
 611         if (status) {
 612                 dev_err(&port->dev, "%s: FCR setting failed\n", __func__);
 613                 return status;
 614         }
 615
 616         divisor = f81534_calc_baud_divisor(baudrate, port_priv->baud_base);
 617
 618         mutex_lock(&port_priv->lcr_mutex);
 619
 620         value = UART_LCR_DLAB;
 621         status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
 622                                                 value);
 623         if (status) {
 624                 dev_err(&port->dev, "%s: set LCR failed\n", __func__);
 625                 goto out_unlock;
 626         }
 627
 628         value = divisor & 0xff;
 629         status = f81534_set_port_register(port, F81534_DIVISOR_LSB_REG, value);
 630         if (status) {
 631                 dev_err(&port->dev, "%s: set DLAB LSB failed\n", __func__);
 632                 goto out_unlock;
 633         }
 634
 635         value = (divisor >> 8) & 0xff;
 636         status = f81534_set_port_register(port, F81534_DIVISOR_MSB_REG, value);
 637         if (status) {
 638                 dev_err(&port->dev, "%s: set DLAB MSB failed\n", __func__);
 639                 goto out_unlock;
 640         }
 641
 642         value = lcr | (port_priv->shadow_lcr & UART_LCR_SBC);
 643         status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
 644                                                 value);
 645         if (status) {
 646                 dev_err(&port->dev, "%s: set LCR failed\n", __func__);
 647                 goto out_unlock;
 648         }
 649
 650         port_priv->shadow_lcr = value;
 651 out_unlock:
 652         mutex_unlock(&port_priv->lcr_mutex);
 653
 654         return status;
 655 }
 656
 657 static void f81534_break_ctl(struct tty_struct *tty, int break_state)
 658 {
 659         struct usb_serial_port *port = tty->driver_data;
 660         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 661         int status;
 662
 663         mutex_lock(&port_priv->lcr_mutex);
 664
 665         if (break_state)
 666                 port_priv->shadow_lcr |= UART_LCR_SBC;
 667         else
 668                 port_priv->shadow_lcr &= ~UART_LCR_SBC;
 669
 670         status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
 671                                         port_priv->shadow_lcr);
 672         if (status)
 673                 dev_err(&port->dev, "set break failed: %d\n", status);
 674
 675         mutex_unlock(&port_priv->lcr_mutex);
 676 }
 677
 678 static int f81534_update_mctrl(struct usb_serial_port *port, unsigned int set,
 679                                 unsigned int clear)
 680 {
 681         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 682         int status;
 683         u8 tmp;
 684
 685         if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
 686                 return 0;       /* no change */
 687
 688         mutex_lock(&port_priv->mcr_mutex);
 689
 690         /* 'Set' takes precedence over 'Clear' */
 691         clear &= ~set;
 692
 693         /* Always enable UART_MCR_OUT2 */
 694         tmp = UART_MCR_OUT2 | port_priv->shadow_mcr;
 695
 696         if (clear & TIOCM_DTR)
 697                 tmp &= ~UART_MCR_DTR;
 698
 699         if (clear & TIOCM_RTS)
 700                 tmp &= ~UART_MCR_RTS;
 701
 702         if (set & TIOCM_DTR)
 703                 tmp |= UART_MCR_DTR;
 704
 705         if (set & TIOCM_RTS)
 706                 tmp |= UART_MCR_RTS;
 707
 708         status = f81534_set_port_register(port, F81534_MODEM_CONTROL_REG, tmp);
 709         if (status < 0) {
 710                 dev_err(&port->dev, "%s: MCR write failed\n", __func__);
 711                 mutex_unlock(&port_priv->mcr_mutex);
 712                 return status;
 713         }
 714
 715         port_priv->shadow_mcr = tmp;
 716         mutex_unlock(&port_priv->mcr_mutex);
 717         return 0;
 718 }
 719
 720 /*
 721  * This function will search the data area with token F81534_CUSTOM_VALID_TOKEN
 722  * for latest configuration index. If nothing found
 723  * (*index = F81534_CUSTOM_NO_CUSTOM_DATA), We'll load default configure in
 724  * F81534_DEF_CONF_ADDRESS_START section.
 725  *
 726  * Due to we only use block0 to save data, so *index should be 0 or
 727  * F81534_CUSTOM_NO_CUSTOM_DATA.
 728  */
 729 static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
 730 {
 731         u8 tmp;
 732         int status;
 733
 734         status = f81534_read_flash(serial, F81534_CUSTOM_ADDRESS_START, 1,
 735                                         &tmp);
 736         if (status) {
 737                 dev_err(&serial->interface->dev, "%s: read failed: %d\n",
 738                                 __func__, status);
 739                 return status;
 740         }
 741
 742         /* We'll use the custom data when the data is valid. */
 743         if (tmp == F81534_CUSTOM_VALID_TOKEN)
 744                 *index = 0;
 745         else
 746                 *index = F81534_CUSTOM_NO_CUSTOM_DATA;
 747
 748         return 0;
 749 }
 750
 751 /*
 752  * The F81532/534 will not report serial port to USB serial subsystem when
 753  * H/W DCD/DSR/CTS/RI/RX pin connected to ground.
 754  *
 755  * To detect RX pin status, we'll enable MCR interal loopback, disable it and
 756  * delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
 757  */
 758 static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
 759 {
 760         int status;
 761         u8 old_mcr;
 762         u8 msr;
 763         u8 lsr;
 764         u8 msr_mask;
 765
 766         msr_mask = UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS;
 767
 768         status = f81534_get_phy_port_register(serial, phy,
 769                                 F81534_MODEM_STATUS_REG, &msr);
 770         if (status)
 771                 return false;
 772
 773         if ((msr & msr_mask) != msr_mask)
 774                 return false;
 775
 776         status = f81534_set_phy_port_register(serial, phy,
 777                                 F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
 778                                 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 779         if (status)
 780                 return false;
 781
 782         status = f81534_get_phy_port_register(serial, phy,
 783                                 F81534_MODEM_CONTROL_REG, &old_mcr);
 784         if (status)
 785                 return false;
 786
 787         status = f81534_set_phy_port_register(serial, phy,
 788                                 F81534_MODEM_CONTROL_REG, UART_MCR_LOOP);
 789         if (status)
 790                 return false;
 791
 792         status = f81534_set_phy_port_register(serial, phy,
 793                                 F81534_MODEM_CONTROL_REG, 0x0);
 794         if (status)
 795                 return false;
 796
 797         msleep(60);
 798
 799         status = f81534_get_phy_port_register(serial, phy,
 800                                 F81534_LINE_STATUS_REG, &lsr);
 801         if (status)
 802                 return false;
 803
 804         status = f81534_set_phy_port_register(serial, phy,
 805                                 F81534_MODEM_CONTROL_REG, old_mcr);
 806         if (status)
 807                 return false;
 808
 809         if ((lsr & UART_LSR_BI) == UART_LSR_BI)
 810                 return true;
 811
 812         return false;
 813 }
 814
 815 /*
 816  * We had 2 generation of F81532/534 IC. All has an internal storage.
 817  *
 818  * 1st is pure USB-to-TTL RS232 IC and designed for 4 ports only, no any
 819  * internal data will used. All mode and gpio control should manually set
 820  * by AP or Driver and all storage space value are 0xff. The
 821  * f81534_calc_num_ports() will run to final we marked as "oldest version"
 822  * for this IC.
 823  *
 824  * 2rd is designed to more generic to use any transceiver and this is our
 825  * mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
 826  * (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is
 827  * F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
 828  * 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
 829  * 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
 830  * The f81534_calc_num_ports() will run to "new style" with checking
 831  * F81534_PORT_UNAVAILABLE section.
 832  */
 833 static int f81534_calc_num_ports(struct usb_serial *serial,
 834                                         struct usb_serial_endpoints *epds)
 835 {
 836         struct f81534_serial_private *serial_priv;
 837         struct device *dev = &serial->interface->dev;
 838         int size_bulk_in = usb_endpoint_maxp(epds->bulk_in[0]);
 839         int size_bulk_out = usb_endpoint_maxp(epds->bulk_out[0]);
 840         u8 num_port = 0;
 841         int index = 0;
 842         int status;
 843         int i;
 844
 845         if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
 846                         size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
 847                 dev_err(dev, "unsupported endpoint max packet size\n");
 848                 return -ENODEV;
 849         }
 850
 851         serial_priv = devm_kzalloc(&serial->interface->dev,
 852                                         sizeof(*serial_priv), GFP_KERNEL);
 853         if (!serial_priv)
 854                 return -ENOMEM;
 855
 856         usb_set_serial_data(serial, serial_priv);
 857         mutex_init(&serial_priv->urb_mutex);
 858
 859         /* Check had custom setting */
 860         status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
 861         if (status) {
 862                 dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
 863                                 __func__, status);
 864                 return status;
 865         }
 866
 867         /*
 868          * We'll read custom data only when data available, otherwise we'll
 869          * read default value instead.
 870          */
 871         if (serial_priv->setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
 872                 status = f81534_read_flash(serial,
 873                                                 F81534_CUSTOM_ADDRESS_START +
 874                                                 F81534_CONF_OFFSET,
 875                                                 sizeof(serial_priv->conf_data),
 876                                                 serial_priv->conf_data);
 877                 if (status) {
 878                         dev_err(&serial->interface->dev,
 879                                         "%s: get custom data failed: %d\n",
 880                                         __func__, status);
 881                         return status;
 882                 }
 883
 884                 dev_dbg(&serial->interface->dev,
 885                                 "%s: read config from block: %d\n", __func__,
 886                                 serial_priv->setting_idx);
 887         } else {
 888                 /* Read default board setting */
 889                 status = f81534_read_flash(serial,
 890                                 F81534_DEF_CONF_ADDRESS_START,
 891                                 sizeof(serial_priv->conf_data),
 892                                 serial_priv->conf_data);
 893                 if (status) {
 894                         dev_err(&serial->interface->dev,
 895                                         "%s: read failed: %d\n", __func__,
 896                                         status);
 897                         return status;
 898                 }
 899
 900                 dev_dbg(&serial->interface->dev, "%s: read default config\n",
 901                                 __func__);
 902         }
 903
 904         /* New style, find all possible ports */
 905         for (i = 0; i < F81534_NUM_PORT; ++i) {
 906                 if (f81534_check_port_hw_disabled(serial, i))
 907                         serial_priv->conf_data[i] |= F81534_PORT_UNAVAILABLE;
 908
 909                 if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
 910                         continue;
 911
 912                 ++num_port;
 913         }
 914
 915         if (!num_port) {
 916                 dev_warn(&serial->interface->dev,
 917                         "no config found, assuming 4 ports\n");
 918                 num_port = 4;           /* Nothing found, oldest version IC */
 919         }
 920
 921         /* Assign phy-to-logic mapping */
 922         for (i = 0; i < F81534_NUM_PORT; ++i) {
 923                 if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
 924                         continue;
 925
 926                 serial_priv->tty_idx[i] = index++;
 927                 dev_dbg(&serial->interface->dev,
 928                                 "%s: phy_num: %d, tty_idx: %d\n", __func__, i,
 929                                 serial_priv->tty_idx[i]);
 930         }
 931
 932         /*
 933          * Setup bulk-out endpoint multiplexing. All ports share the same
 934          * bulk-out endpoint.
 935          */
 936         BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < F81534_NUM_PORT);
 937
 938         for (i = 1; i < num_port; ++i)
 939                 epds->bulk_out[i] = epds->bulk_out[0];
 940
 941         epds->num_bulk_out = num_port;
 942
 943         return num_port;
 944 }
 945
 946 static void f81534_set_termios(struct tty_struct *tty,
 947                                 struct usb_serial_port *port,
 948                                 struct ktermios *old_termios)
 949 {
 950         u8 new_lcr = 0;
 951         int status;
 952         u32 baud;
 953         u32 old_baud;
 954
 955         if (C_BAUD(tty) == B0)
 956                 f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
 957         else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
 958                 f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
 959
 960         if (C_PARENB(tty)) {
 961                 new_lcr |= UART_LCR_PARITY;
 962
 963                 if (!C_PARODD(tty))
 964                         new_lcr |= UART_LCR_EPAR;
 965
 966                 if (C_CMSPAR(tty))
 967                         new_lcr |= UART_LCR_SPAR;
 968         }
 969
 970         if (C_CSTOPB(tty))
 971                 new_lcr |= UART_LCR_STOP;
 972
 973         new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag));
 974
 975         baud = tty_get_baud_rate(tty);
 976         if (!baud)
 977                 return;
 978
 979         if (old_termios)
 980                 old_baud = tty_termios_baud_rate(old_termios);
 981         else
 982                 old_baud = F81534_DEFAULT_BAUD_RATE;
 983
 984         dev_dbg(&port->dev, "%s: baud: %d\n", __func__, baud);
 985
 986         status = f81534_set_port_config(port, tty, baud, old_baud, new_lcr);
 987         if (status < 0) {
 988                 dev_err(&port->dev, "%s: set port config failed: %d\n",
 989                                 __func__, status);
 990         }
 991 }
 992
 993 static int f81534_submit_read_urb(struct usb_serial *serial, gfp_t flags)
 994 {
 995         return usb_serial_generic_submit_read_urbs(serial->port[0], flags);
 996 }
 997
 998 static void f81534_msr_changed(struct usb_serial_port *port, u8 msr)
 999 {
1000         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1001         struct tty_struct *tty;
1002         unsigned long flags;
1003         u8 old_msr;
1004
1005         if (!(msr & UART_MSR_ANY_DELTA))
1006                 return;
1007
1008         spin_lock_irqsave(&port_priv->msr_lock, flags);
1009         old_msr = port_priv->shadow_msr;
1010         port_priv->shadow_msr = msr;
1011         spin_unlock_irqrestore(&port_priv->msr_lock, flags);
1012
1013         dev_dbg(&port->dev, "%s: MSR from %02x to %02x\n", __func__, old_msr,
1014                         msr);
1015
1016         /* Update input line counters */
1017         if (msr & UART_MSR_DCTS)
1018                 port->icount.cts++;
1019         if (msr & UART_MSR_DDSR)
1020                 port->icount.dsr++;
1021         if (msr & UART_MSR_DDCD)
1022                 port->icount.dcd++;
1023         if (msr & UART_MSR_TERI)
1024                 port->icount.rng++;
1025
1026         wake_up_interruptible(&port->port.delta_msr_wait);
1027
1028         if (!(msr & UART_MSR_DDCD))
1029                 return;
1030
1031         dev_dbg(&port->dev, "%s: DCD Changed: phy_num: %d from %x to %x\n",
1032                         __func__, port_priv->phy_num, old_msr, msr);
1033
1034         tty = tty_port_tty_get(&port->port);
1035         if (!tty)
1036                 return;
1037
1038         usb_serial_handle_dcd_change(port, tty, msr & UART_MSR_DCD);
1039         tty_kref_put(tty);
1040 }
1041
1042 static int f81534_read_msr(struct usb_serial_port *port)
1043 {
1044         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1045         unsigned long flags;
1046         int status;
1047         u8 msr;
1048
1049         /* Get MSR initial value */
1050         status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
1051         if (status)
1052                 return status;
1053
1054         /* Force update current state */
1055         spin_lock_irqsave(&port_priv->msr_lock, flags);
1056         port_priv->shadow_msr = msr;
1057         spin_unlock_irqrestore(&port_priv->msr_lock, flags);
1058
1059         return 0;
1060 }
1061
1062 static int f81534_open(struct tty_struct *tty, struct usb_serial_port *port)
1063 {
1064         struct f81534_serial_private *serial_priv =
1065                         usb_get_serial_data(port->serial);
1066         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1067         int status;
1068
1069         status = f81534_set_port_register(port,
1070                                 F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
1071                                 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
1072         if (status) {
1073                 dev_err(&port->dev, "%s: Clear FIFO failed: %d\n", __func__,
1074                                 status);
1075                 return status;
1076         }
1077
1078         if (tty)
1079                 f81534_set_termios(tty, port, NULL);
1080
1081         status = f81534_read_msr(port);
1082         if (status)
1083                 return status;
1084
1085         mutex_lock(&serial_priv->urb_mutex);
1086
1087         /* Submit Read URBs for first port opened */
1088         if (!serial_priv->opened_port) {
1089                 status = f81534_submit_read_urb(port->serial, GFP_KERNEL);
1090                 if (status)
1091                         goto exit;
1092         }
1093
1094         serial_priv->opened_port++;
1095
1096 exit:
1097         mutex_unlock(&serial_priv->urb_mutex);
1098
1099         set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
1100         return status;
1101 }
1102
1103 static void f81534_close(struct usb_serial_port *port)
1104 {
1105         struct f81534_serial_private *serial_priv =
1106                         usb_get_serial_data(port->serial);
1107         struct usb_serial_port *port0 = port->serial->port[0];
1108         unsigned long flags;
1109         size_t i;
1110
1111         usb_kill_urb(port->write_urbs[0]);
1112
1113         spin_lock_irqsave(&port->lock, flags);
1114         kfifo_reset_out(&port->write_fifo);
1115         spin_unlock_irqrestore(&port->lock, flags);
1116
1117         /* Kill Read URBs when final port closed */
1118         mutex_lock(&serial_priv->urb_mutex);
1119         serial_priv->opened_port--;
1120
1121         if (!serial_priv->opened_port) {
1122                 for (i = 0; i < ARRAY_SIZE(port0->read_urbs); ++i)
1123                         usb_kill_urb(port0->read_urbs[i]);
1124         }
1125
1126         mutex_unlock(&serial_priv->urb_mutex);
1127 }
1128
1129 static void f81534_get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
1130 {
1131         struct usb_serial_port *port = tty->driver_data;
1132         struct f81534_port_private *port_priv;
1133
1134         port_priv = usb_get_serial_port_data(port);
1135
1136         ss->baud_base = port_priv->baud_base;
1137 }
1138
1139 static void f81534_process_per_serial_block(struct usb_serial_port *port,
1140                 u8 *data)
1141 {
1142         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1143         int phy_num = data[0];
1144         size_t read_size = 0;
1145         size_t i;
1146         char tty_flag;
1147         int status;
1148         u8 lsr;
1149
1150         /*
1151          * The block layout is 128 Bytes
1152          * index 0: port phy idx (e.g., 0,1,2,3),
1153          * index 1: It's could be
1154          *                      F81534_TOKEN_RECEIVE
1155          *                      F81534_TOKEN_TX_EMPTY
1156          *                      F81534_TOKEN_MSR_CHANGE
1157          * index 2: serial in size (data+lsr, must be even)
1158          *                      meaningful for F81534_TOKEN_RECEIVE only
1159          * index 3: current MSR with this device
1160          * index 4~127: serial in data block (data+lsr, must be even)
1161          */
1162         switch (data[1]) {
1163         case F81534_TOKEN_TX_EMPTY:
1164                 set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
1165
1166                 /* Try to submit writer */
1167                 status = f81534_submit_writer(port, GFP_ATOMIC);
1168                 if (status)
1169                         dev_err(&port->dev, "%s: submit failed\n", __func__);
1170                 return;
1171
1172         case F81534_TOKEN_MSR_CHANGE:
1173                 f81534_msr_changed(port, data[3]);
1174                 return;
1175
1176         case F81534_TOKEN_RECEIVE:
1177                 read_size = data[2];
1178                 if (read_size > F81534_MAX_RX_SIZE) {
1179                         dev_err(&port->dev,
1180                                 "%s: phy: %d read_size: %zu larger than: %d\n",
1181                                 __func__, phy_num, read_size,
1182                                 F81534_MAX_RX_SIZE);
1183                         return;
1184                 }
1185
1186                 break;
1187
1188         default:
1189                 dev_warn(&port->dev, "%s: unknown token: %02x\n", __func__,
1190                                 data[1]);
1191                 return;
1192         }
1193
1194         for (i = 4; i < 4 + read_size; i += 2) {
1195                 tty_flag = TTY_NORMAL;
1196                 lsr = data[i + 1];
1197
1198                 if (lsr & UART_LSR_BRK_ERROR_BITS) {
1199                         if (lsr & UART_LSR_BI) {
1200                                 tty_flag = TTY_BREAK;
1201                                 port->icount.brk++;
1202                                 usb_serial_handle_break(port);
1203                         } else if (lsr & UART_LSR_PE) {
1204                                 tty_flag = TTY_PARITY;
1205                                 port->icount.parity++;
1206                         } else if (lsr & UART_LSR_FE) {
1207                                 tty_flag = TTY_FRAME;
1208                                 port->icount.frame++;
1209                         }
1210
1211                         if (lsr & UART_LSR_OE) {
1212                                 port->icount.overrun++;
1213                                 tty_insert_flip_char(&port->port, 0,
1214                                                 TTY_OVERRUN);
1215                         }
1216
1217                         schedule_work(&port_priv->lsr_work);
1218                 }
1219
1220                 if (port->sysrq) {
1221                         if (usb_serial_handle_sysrq_char(port, data[i]))
1222                                 continue;
1223                 }
1224
1225                 tty_insert_flip_char(&port->port, data[i], tty_flag);
1226         }
1227
1228         tty_flip_buffer_push(&port->port);
1229 }
1230
1231 static void f81534_process_read_urb(struct urb *urb)
1232 {
1233         struct f81534_serial_private *serial_priv;
1234         struct usb_serial_port *port;
1235         struct usb_serial *serial;
1236         u8 *buf;
1237         int phy_port_num;
1238         int tty_port_num;
1239         size_t i;
1240
1241         if (!urb->actual_length ||
1242                         urb->actual_length % F81534_RECEIVE_BLOCK_SIZE) {
1243                 return;
1244         }
1245
1246         port = urb->context;
1247         serial = port->serial;
1248         buf = urb->transfer_buffer;
1249         serial_priv = usb_get_serial_data(serial);
1250
1251         for (i = 0; i < urb->actual_length; i += F81534_RECEIVE_BLOCK_SIZE) {
1252                 phy_port_num = buf[i];
1253                 if (phy_port_num >= F81534_NUM_PORT) {
1254                         dev_err(&port->dev,
1255                                 "%s: phy_port_num: %d larger than: %d\n",
1256                                 __func__, phy_port_num, F81534_NUM_PORT);
1257                         continue;
1258                 }
1259
1260                 tty_port_num = serial_priv->tty_idx[phy_port_num];
1261                 port = serial->port[tty_port_num];
1262
1263                 if (tty_port_initialized(&port->port))
1264                         f81534_process_per_serial_block(port, &buf[i]);
1265         }
1266 }
1267
1268 static void f81534_write_usb_callback(struct urb *urb)
1269 {
1270         struct usb_serial_port *port = urb->context;
1271
1272         switch (urb->status) {
1273         case 0:
1274                 break;
1275         case -ENOENT:
1276         case -ECONNRESET:
1277         case -ESHUTDOWN:
1278                 dev_dbg(&port->dev, "%s - urb stopped: %d\n",
1279                                 __func__, urb->status);
1280                 return;
1281         case -EPIPE:
1282                 dev_err(&port->dev, "%s - urb stopped: %d\n",
1283                                 __func__, urb->status);
1284                 return;
1285         default:
1286                 dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
1287                                 __func__, urb->status);
1288                 break;
1289         }
1290 }
1291
1292 static void f81534_lsr_worker(struct work_struct *work)
1293 {
1294         struct f81534_port_private *port_priv;
1295         struct usb_serial_port *port;
1296         int status;
1297         u8 tmp;
1298
1299         port_priv = container_of(work, struct f81534_port_private, lsr_work);
1300         port = port_priv->port;
1301
1302         status = f81534_get_port_register(port, F81534_LINE_STATUS_REG, &tmp);
1303         if (status)
1304                 dev_warn(&port->dev, "read LSR failed: %d\n", status);
1305 }
1306
1307 static int f81534_set_port_output_pin(struct usb_serial_port *port)
1308 {
1309         struct f81534_serial_private *serial_priv;
1310         struct f81534_port_private *port_priv;
1311         struct usb_serial *serial;
1312         const struct f81534_port_out_pin *pins;
1313         int status;
1314         int i;
1315         u8 value;
1316         u8 idx;
1317
1318         serial = port->serial;
1319         serial_priv = usb_get_serial_data(serial);
1320         port_priv = usb_get_serial_port_data(port);
1321
1322         idx = F81534_CONF_INIT_GPIO_OFFSET + port_priv->phy_num;
1323         value = serial_priv->conf_data[idx];
1324         if (value >= F81534_CONF_GPIO_SHUTDOWN) {
1325                 /*
1326                  * Newer IC configure will make transceiver in shutdown mode on
1327                  * initial power on. We need enable it before using UARTs.
1328                  */
1329                 idx = F81534_CONF_WORK_GPIO_OFFSET + port_priv->phy_num;
1330                 value = serial_priv->conf_data[idx];
1331                 if (value >= F81534_CONF_GPIO_SHUTDOWN)
1332                         value = F81534_CONF_GPIO_RS232;
1333         }
1334
1335         pins = &f81534_port_out_pins[port_priv->phy_num];
1336
1337         for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
1338                 status = f81534_set_mask_register(serial,
1339                                 pins->pin[i].reg_addr, pins->pin[i].reg_mask,
1340                                 value & BIT(i) ? pins->pin[i].reg_mask : 0);
1341                 if (status)
1342                         return status;
1343         }
1344
1345         dev_dbg(&port->dev, "Output pin (M0/M1/M2): %d\n", value);
1346         return 0;
1347 }
1348
1349 static int f81534_port_probe(struct usb_serial_port *port)
1350 {
1351         struct f81534_serial_private *serial_priv;
1352         struct f81534_port_private *port_priv;
1353         int ret;
1354         u8 value;
1355
1356         serial_priv = usb_get_serial_data(port->serial);
1357         port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
1358         if (!port_priv)
1359                 return -ENOMEM;
1360
1361         /*
1362          * We'll make tx frame error when baud rate from 384~500kps. So we'll
1363          * delay all tx data frame with 1bit.
1364          */
1365         port_priv->shadow_clk = F81534_UART_EN | F81534_CLK_TX_DELAY_1BIT;
1366         spin_lock_init(&port_priv->msr_lock);
1367         mutex_init(&port_priv->mcr_mutex);
1368         mutex_init(&port_priv->lcr_mutex);
1369         INIT_WORK(&port_priv->lsr_work, f81534_lsr_worker);
1370
1371         /* Assign logic-to-phy mapping */
1372         ret = f81534_logic_to_phy_port(port->serial, port);
1373         if (ret < 0)
1374                 return ret;
1375
1376         port_priv->phy_num = ret;
1377         port_priv->port = port;
1378         usb_set_serial_port_data(port, port_priv);
1379         dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
1380                         port->port_number, port_priv->phy_num);
1381
1382         /*
1383          * The F81532/534 will hang-up when enable LSR interrupt in IER and
1384          * occur data overrun. So we'll disable the LSR interrupt in probe()
1385          * and submit the LSR worker to clear LSR state when reported LSR error
1386          * bit with bulk-in data in f81534_process_per_serial_block().
1387          */
1388         ret = f81534_set_port_register(port, F81534_INTERRUPT_ENABLE_REG,
1389                         UART_IER_RDI | UART_IER_THRI | UART_IER_MSI);
1390         if (ret)
1391                 return ret;
1392
1393         value = serial_priv->conf_data[port_priv->phy_num];
1394         switch (value & F81534_PORT_CONF_MODE_MASK) {
1395         case F81534_PORT_CONF_RS485_INVERT:
1396                 port_priv->shadow_clk |= F81534_CLK_RS485_MODE |
1397                                         F81534_CLK_RS485_INVERT;
1398                 dev_dbg(&port->dev, "RS485 invert mode\n");
1399                 break;
1400         case F81534_PORT_CONF_RS485:
1401                 port_priv->shadow_clk |= F81534_CLK_RS485_MODE;
1402                 dev_dbg(&port->dev, "RS485 mode\n");
1403                 break;
1404
1405         default:
1406         case F81534_PORT_CONF_RS232:
1407                 dev_dbg(&port->dev, "RS232 mode\n");
1408                 break;
1409         }
1410
1411         return f81534_set_port_output_pin(port);
1412 }
1413
1414 static void f81534_port_remove(struct usb_serial_port *port)
1415 {
1416         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1417
1418         flush_work(&port_priv->lsr_work);
1419 }
1420
1421 static int f81534_tiocmget(struct tty_struct *tty)
1422 {
1423         struct usb_serial_port *port = tty->driver_data;
1424         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1425         int status;
1426         int r;
1427         u8 msr;
1428         u8 mcr;
1429
1430         /* Read current MSR from device */
1431         status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
1432         if (status)
1433                 return status;
1434
1435         mutex_lock(&port_priv->mcr_mutex);
1436         mcr = port_priv->shadow_mcr;
1437         mutex_unlock(&port_priv->mcr_mutex);
1438
1439         r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
1440             (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
1441             (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
1442             (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
1443             (msr & UART_MSR_RI ? TIOCM_RI : 0) |
1444             (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
1445
1446         return r;
1447 }
1448
1449 static int f81534_tiocmset(struct tty_struct *tty, unsigned int set,
1450                                 unsigned int clear)
1451 {
1452         struct usb_serial_port *port = tty->driver_data;
1453
1454         return f81534_update_mctrl(port, set, clear);
1455 }
1456
1457 static void f81534_dtr_rts(struct usb_serial_port *port, int on)
1458 {
1459         if (on)
1460                 f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
1461         else
1462                 f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
1463 }
1464
1465 static int f81534_write(struct tty_struct *tty, struct usb_serial_port *port,
1466                         const u8 *buf, int count)
1467 {
1468         int bytes_out, status;
1469
1470         if (!count)
1471                 return 0;
1472
1473         bytes_out = kfifo_in_locked(&port->write_fifo, buf, count,
1474                                         &port->lock);
1475
1476         status = f81534_submit_writer(port, GFP_ATOMIC);
1477         if (status) {
1478                 dev_err(&port->dev, "%s: submit failed\n", __func__);
1479                 return status;
1480         }
1481
1482         return bytes_out;
1483 }
1484
1485 static bool f81534_tx_empty(struct usb_serial_port *port)
1486 {
1487         struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
1488
1489         return test_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
1490 }
1491
1492 static int f81534_resume(struct usb_serial *serial)
1493 {
1494         struct f81534_serial_private *serial_priv =
1495                         usb_get_serial_data(serial);
1496         struct usb_serial_port *port;
1497         int error = 0;
1498         int status;
1499         size_t i;
1500
1501         /*
1502          * We'll register port 0 bulkin when port had opened, It'll take all
1503          * port received data, MSR register change and TX_EMPTY information.
1504          */
1505         mutex_lock(&serial_priv->urb_mutex);
1506
1507         if (serial_priv->opened_port) {
1508                 status = f81534_submit_read_urb(serial, GFP_NOIO);
1509                 if (status) {
1510                         mutex_unlock(&serial_priv->urb_mutex);
1511                         return status;
1512                 }
1513         }
1514
1515         mutex_unlock(&serial_priv->urb_mutex);
1516
1517         for (i = 0; i < serial->num_ports; i++) {
1518                 port = serial->port[i];
1519                 if (!tty_port_initialized(&port->port))
1520                         continue;
1521
1522                 status = f81534_submit_writer(port, GFP_NOIO);
1523                 if (status) {
1524                         dev_err(&port->dev, "%s: submit failed\n", __func__);
1525                         ++error;
1526                 }
1527         }
1528
1529         if (error)
1530                 return -EIO;
1531
1532         return 0;
1533 }
1534
1535 static struct usb_serial_driver f81534_device = {
1536         .driver = {
1537                    .owner = THIS_MODULE,
1538                    .name = "f81534",
1539         },
1540         .description =          DRIVER_DESC,
1541         .id_table =             f81534_id_table,
1542         .num_bulk_in =          1,
1543         .num_bulk_out =         1,
1544         .open =                 f81534_open,
1545         .close =                f81534_close,
1546         .write =                f81534_write,
1547         .tx_empty =             f81534_tx_empty,
1548         .calc_num_ports =       f81534_calc_num_ports,
1549         .port_probe =           f81534_port_probe,
1550         .port_remove =          f81534_port_remove,
1551         .break_ctl =            f81534_break_ctl,
1552         .dtr_rts =              f81534_dtr_rts,
1553         .process_read_urb =     f81534_process_read_urb,
1554         .get_serial =           f81534_get_serial_info,
1555         .tiocmget =             f81534_tiocmget,
1556         .tiocmset =             f81534_tiocmset,
1557         .write_bulk_callback =  f81534_write_usb_callback,
1558         .set_termios =          f81534_set_termios,
1559         .resume =               f81534_resume,
1560 };
1561
1562 static struct usb_serial_driver *const serial_drivers[] = {
1563         &f81534_device, NULL
1564 };
1565
1566 module_usb_serial_driver(serial_drivers, f81534_id_table);
1567
1568 MODULE_DEVICE_TABLE(usb, f81534_id_table);
1569 MODULE_DESCRIPTION(DRIVER_DESC);
1570 MODULE_AUTHOR("Peter Hong <Peter_Hong@fintek.com.tw>");
1571 MODULE_AUTHOR("Tom Tsai <Tom_Tsai@fintek.com.tw>");
1572 MODULE_LICENSE("GPL");