2 * phy-brcm-usb.c - Broadcom USB Phy Driver
4 * Copyright (C) 2015-2017 Broadcom
6 * This software is licensed under the terms of the GNU General Public
7 * License version 2, as published by the Free Software Foundation, and
8 * may be copied, distributed, and modified under those terms.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/clk.h>
17 #include <linux/delay.h>
18 #include <linux/err.h>
20 #include <linux/module.h>
22 #include <linux/phy/phy.h>
23 #include <linux/platform_device.h>
24 #include <linux/interrupt.h>
25 #include <linux/soc/brcmstb/brcmstb.h>
26 #include <dt-bindings/phy/phy.h>
28 #include "phy-brcm-usb-init.h"
30 static DEFINE_MUTEX(sysfs_lock);
32 enum brcm_usb_phy_id {
38 struct value_to_name_map {
43 static struct value_to_name_map brcm_dr_mode_to_name[] = {
44 { USB_CTLR_MODE_HOST, "host" },
45 { USB_CTLR_MODE_DEVICE, "peripheral" },
46 { USB_CTLR_MODE_DRD, "drd" },
47 { USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
50 static struct value_to_name_map brcm_dual_mode_to_name[] = {
62 struct brcm_usb_phy_data {
63 struct brcm_usb_init_params ini;
66 struct clk *usb_20_clk;
67 struct clk *usb_30_clk;
68 struct mutex mutex; /* serialize phy init */
70 struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX];
73 static int brcm_usb_phy_init(struct phy *gphy)
75 struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
76 struct brcm_usb_phy_data *priv =
77 container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
80 * Use a lock to make sure a second caller waits until
81 * the base phy is inited before using it.
83 mutex_lock(&priv->mutex);
84 if (priv->init_count++ == 0) {
85 clk_enable(priv->usb_20_clk);
86 clk_enable(priv->usb_30_clk);
87 brcm_usb_init_common(&priv->ini);
89 mutex_unlock(&priv->mutex);
90 if (phy->id == BRCM_USB_PHY_2_0)
91 brcm_usb_init_eohci(&priv->ini);
92 else if (phy->id == BRCM_USB_PHY_3_0)
93 brcm_usb_init_xhci(&priv->ini);
95 dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id,
101 static int brcm_usb_phy_exit(struct phy *gphy)
103 struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
104 struct brcm_usb_phy_data *priv =
105 container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
107 dev_dbg(&gphy->dev, "EXIT\n");
108 if (phy->id == BRCM_USB_PHY_2_0)
109 brcm_usb_uninit_eohci(&priv->ini);
110 if (phy->id == BRCM_USB_PHY_3_0)
111 brcm_usb_uninit_xhci(&priv->ini);
113 /* If both xhci and eohci are gone, reset everything else */
114 mutex_lock(&priv->mutex);
115 if (--priv->init_count == 0) {
116 brcm_usb_uninit_common(&priv->ini);
117 clk_disable(priv->usb_20_clk);
118 clk_disable(priv->usb_30_clk);
120 mutex_unlock(&priv->mutex);
125 static struct phy_ops brcm_usb_phy_ops = {
126 .init = brcm_usb_phy_init,
127 .exit = brcm_usb_phy_exit,
128 .owner = THIS_MODULE,
131 static struct phy *brcm_usb_phy_xlate(struct device *dev,
132 struct of_phandle_args *args)
134 struct brcm_usb_phy_data *data = dev_get_drvdata(dev);
137 * values 0 and 1 are for backward compatibility with
138 * device tree nodes from older bootloaders.
140 switch (args->args[0]) {
143 if (data->phys[BRCM_USB_PHY_2_0].phy)
144 return data->phys[BRCM_USB_PHY_2_0].phy;
145 dev_warn(dev, "Error, 2.0 Phy not found\n");
149 if (data->phys[BRCM_USB_PHY_3_0].phy)
150 return data->phys[BRCM_USB_PHY_3_0].phy;
151 dev_warn(dev, "Error, 3.0 Phy not found\n");
154 return ERR_PTR(-ENODEV);
157 static int name_to_value(struct value_to_name_map *table, int count,
158 const char *name, int *value)
163 for (x = 0; x < count; x++) {
164 if (sysfs_streq(name, table[x].name)) {
172 static const char *value_to_name(struct value_to_name_map *table, int count,
177 return table[value].name;
180 static ssize_t dr_mode_show(struct device *dev,
181 struct device_attribute *attr,
184 struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
186 return sprintf(buf, "%s\n",
187 value_to_name(&brcm_dr_mode_to_name[0],
188 ARRAY_SIZE(brcm_dr_mode_to_name),
191 static DEVICE_ATTR_RO(dr_mode);
193 static ssize_t dual_select_store(struct device *dev,
194 struct device_attribute *attr,
195 const char *buf, size_t len)
197 struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
201 mutex_lock(&sysfs_lock);
202 res = name_to_value(&brcm_dual_mode_to_name[0],
203 ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
205 brcm_usb_init_set_dual_select(&priv->ini, value);
208 mutex_unlock(&sysfs_lock);
212 static ssize_t dual_select_show(struct device *dev,
213 struct device_attribute *attr,
216 struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
219 mutex_lock(&sysfs_lock);
220 value = brcm_usb_init_get_dual_select(&priv->ini);
221 mutex_unlock(&sysfs_lock);
222 return sprintf(buf, "%s\n",
223 value_to_name(&brcm_dual_mode_to_name[0],
224 ARRAY_SIZE(brcm_dual_mode_to_name),
227 static DEVICE_ATTR_RW(dual_select);
229 static struct attribute *brcm_usb_phy_attrs[] = {
230 &dev_attr_dr_mode.attr,
231 &dev_attr_dual_select.attr,
235 static const struct attribute_group brcm_usb_phy_group = {
236 .attrs = brcm_usb_phy_attrs,
239 static int brcm_usb_phy_dvr_init(struct device *dev,
240 struct brcm_usb_phy_data *priv,
241 struct device_node *dn)
246 priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
247 if (IS_ERR(priv->usb_20_clk)) {
248 dev_info(dev, "Clock not found in Device Tree\n");
249 priv->usb_20_clk = NULL;
251 err = clk_prepare_enable(priv->usb_20_clk);
255 if (priv->has_eohci) {
256 gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
258 dev_err(dev, "failed to create EHCI/OHCI PHY\n");
259 return PTR_ERR(gphy);
261 priv->phys[BRCM_USB_PHY_2_0].phy = gphy;
262 priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0;
263 phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]);
266 if (priv->has_xhci) {
267 gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
269 dev_err(dev, "failed to create XHCI PHY\n");
270 return PTR_ERR(gphy);
272 priv->phys[BRCM_USB_PHY_3_0].phy = gphy;
273 priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
274 phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
276 priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
277 if (IS_ERR(priv->usb_30_clk)) {
279 "USB3.0 clock not found in Device Tree\n");
280 priv->usb_30_clk = NULL;
282 err = clk_prepare_enable(priv->usb_30_clk);
289 static int brcm_usb_phy_probe(struct platform_device *pdev)
291 struct resource *res;
292 struct device *dev = &pdev->dev;
293 struct brcm_usb_phy_data *priv;
294 struct phy_provider *phy_provider;
295 struct device_node *dn = pdev->dev.of_node;
299 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
302 platform_set_drvdata(pdev, priv);
304 priv->ini.family_id = brcmstb_get_family_id();
305 priv->ini.product_id = brcmstb_get_product_id();
306 brcm_usb_set_family_map(&priv->ini);
307 dev_dbg(dev, "Best mapping table is for %s\n",
308 priv->ini.family_name);
309 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
311 dev_err(dev, "can't get USB_CTRL base address\n");
314 priv->ini.ctrl_regs = devm_ioremap_resource(dev, res);
315 if (IS_ERR(priv->ini.ctrl_regs)) {
316 dev_err(dev, "can't map CTRL register space\n");
320 /* The XHCI EC registers are optional */
321 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
323 priv->ini.xhci_ec_regs =
324 devm_ioremap_resource(dev, res);
325 if (IS_ERR(priv->ini.xhci_ec_regs)) {
326 dev_err(dev, "can't map XHCI EC register space\n");
331 of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
332 of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
334 priv->ini.mode = USB_CTLR_MODE_HOST;
335 err = of_property_read_string(dn, "dr_mode", &mode);
337 name_to_value(&brcm_dr_mode_to_name[0],
338 ARRAY_SIZE(brcm_dr_mode_to_name),
339 mode, &priv->ini.mode);
341 if (of_property_read_bool(dn, "brcm,has-xhci"))
342 priv->has_xhci = true;
343 if (of_property_read_bool(dn, "brcm,has-eohci"))
344 priv->has_eohci = true;
346 err = brcm_usb_phy_dvr_init(dev, priv, dn);
350 mutex_init(&priv->mutex);
352 /* make sure invert settings are correct */
353 brcm_usb_init_ipp(&priv->ini);
356 * Create sysfs entries for mode.
357 * Remove "dual_select" attribute if not in dual mode
359 if (priv->ini.mode != USB_CTLR_MODE_DRD)
360 brcm_usb_phy_attrs[1] = NULL;
361 err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
363 dev_warn(dev, "Error creating sysfs attributes\n");
365 /* start with everything off */
367 brcm_usb_uninit_xhci(&priv->ini);
369 brcm_usb_uninit_eohci(&priv->ini);
370 brcm_usb_uninit_common(&priv->ini);
371 clk_disable(priv->usb_20_clk);
372 clk_disable(priv->usb_30_clk);
374 phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
376 return PTR_ERR_OR_ZERO(phy_provider);
379 #ifdef CONFIG_PM_SLEEP
380 static int brcm_usb_phy_suspend(struct device *dev)
382 struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
384 if (priv->init_count) {
385 clk_disable(priv->usb_20_clk);
386 clk_disable(priv->usb_30_clk);
391 static int brcm_usb_phy_resume(struct device *dev)
393 struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
395 clk_enable(priv->usb_20_clk);
396 clk_enable(priv->usb_30_clk);
397 brcm_usb_init_ipp(&priv->ini);
400 * Initialize anything that was previously initialized.
401 * Uninitialize anything that wasn't previously initialized.
403 if (priv->init_count) {
404 brcm_usb_init_common(&priv->ini);
405 if (priv->phys[BRCM_USB_PHY_2_0].inited) {
406 brcm_usb_init_eohci(&priv->ini);
407 } else if (priv->has_eohci) {
408 brcm_usb_uninit_eohci(&priv->ini);
409 clk_disable(priv->usb_20_clk);
411 if (priv->phys[BRCM_USB_PHY_3_0].inited) {
412 brcm_usb_init_xhci(&priv->ini);
413 } else if (priv->has_xhci) {
414 brcm_usb_uninit_xhci(&priv->ini);
415 clk_disable(priv->usb_30_clk);
419 brcm_usb_uninit_xhci(&priv->ini);
421 brcm_usb_uninit_eohci(&priv->ini);
422 brcm_usb_uninit_common(&priv->ini);
423 clk_disable(priv->usb_20_clk);
424 clk_disable(priv->usb_30_clk);
429 #endif /* CONFIG_PM_SLEEP */
431 static const struct dev_pm_ops brcm_usb_phy_pm_ops = {
432 SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
435 static const struct of_device_id brcm_usb_dt_ids[] = {
436 { .compatible = "brcm,brcmstb-usb-phy" },
440 MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
442 static struct platform_driver brcm_usb_driver = {
443 .probe = brcm_usb_phy_probe,
445 .name = "brcmstb-usb-phy",
446 .owner = THIS_MODULE,
447 .pm = &brcm_usb_phy_pm_ops,
448 .of_match_table = brcm_usb_dt_ids,
452 module_platform_driver(brcm_usb_driver);
454 MODULE_ALIAS("platform:brcmstb-usb-phy");
455 MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>");
456 MODULE_DESCRIPTION("BRCM USB PHY driver");
457 MODULE_LICENSE("GPL v2");