drivers/i2c/busses/i2c-mpc.c

   1 /*
   2  * (C) Copyright 2003-2004
   3  * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
   4
   5  * This is a combined i2c adapter and algorithm driver for the
   6  * MPC107/Tsi107 PowerPC northbridge and processors that include
   7  * the same I2C unit (8240, 8245, 85xx).
   8  *
   9  * Release 0.8
  10  *
  11  * This file is licensed under the terms of the GNU General Public
  12  * License version 2. This program is licensed "as is" without any
  13  * warranty of any kind, whether express or implied.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/sched/signal.h>
  19 #include <linux/of_address.h>
  20 #include <linux/of_irq.h>
  21 #include <linux/of_platform.h>
  22 #include <linux/slab.h>
  23
  24 #include <linux/clk.h>
  25 #include <linux/io.h>
  26 #include <linux/fsl_devices.h>
  27 #include <linux/i2c.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/delay.h>
  30
  31 #include <asm/mpc52xx.h>
  32 #include <asm/mpc85xx.h>
  33 #include <sysdev/fsl_soc.h>
  34
  35 #define DRV_NAME "mpc-i2c"
  36
  37 #define MPC_I2C_CLOCK_LEGACY   0
  38 #define MPC_I2C_CLOCK_PRESERVE (~0U)
  39
  40 #define MPC_I2C_FDR   0x04
  41 #define MPC_I2C_CR    0x08
  42 #define MPC_I2C_SR    0x0c
  43 #define MPC_I2C_DR    0x10
  44 #define MPC_I2C_DFSRR 0x14
  45
  46 #define CCR_MEN  0x80
  47 #define CCR_MIEN 0x40
  48 #define CCR_MSTA 0x20
  49 #define CCR_MTX  0x10
  50 #define CCR_TXAK 0x08
  51 #define CCR_RSTA 0x04
  52
  53 #define CSR_MCF  0x80
  54 #define CSR_MAAS 0x40
  55 #define CSR_MBB  0x20
  56 #define CSR_MAL  0x10
  57 #define CSR_SRW  0x04
  58 #define CSR_MIF  0x02
  59 #define CSR_RXAK 0x01
  60
  61 struct mpc_i2c {
  62         struct device *dev;
  63         void __iomem *base;
  64         u32 interrupt;
  65         wait_queue_head_t queue;
  66         struct i2c_adapter adap;
  67         int irq;
  68         u32 real_clk;
  69 #ifdef CONFIG_PM_SLEEP
  70         u8 fdr, dfsrr;
  71 #endif
  72         struct clk *clk_per;
  73 };
  74
  75 struct mpc_i2c_divider {
  76         u16 divider;
  77         u16 fdr;        /* including dfsrr */
  78 };
  79
  80 struct mpc_i2c_data {
  81         void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock);
  82 };
  83
  84 static inline void writeccr(struct mpc_i2c *i2c, u32 x)
  85 {
  86         writeb(x, i2c->base + MPC_I2C_CR);
  87 }
  88
  89 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
  90 {
  91         struct mpc_i2c *i2c = dev_id;
  92         if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
  93                 /* Read again to allow register to stabilise */
  94                 i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
  95                 writeb(0, i2c->base + MPC_I2C_SR);
  96                 wake_up(&i2c->queue);
  97                 return IRQ_HANDLED;
  98         }
  99         return IRQ_NONE;
 100 }
 101
 102 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
 103  * the bus, because it wants to send ACK.
 104  * Following sequence of enabling/disabling and sending start/stop generates
 105  * the 9 pulses, so it's all OK.
 106  */
 107 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 108 {
 109         int k;
 110         u32 delay_val = 1000000 / i2c->real_clk + 1;
 111
 112         if (delay_val < 2)
 113                 delay_val = 2;
 114
 115         for (k = 9; k; k--) {
 116                 writeccr(i2c, 0);
 117                 writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
 118                 readb(i2c->base + MPC_I2C_DR);
 119                 writeccr(i2c, CCR_MEN);
 120                 udelay(delay_val << 1);
 121         }
 122 }
 123
 124 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 125 {
 126         unsigned long orig_jiffies = jiffies;
 127         u32 cmd_err;
 128         int result = 0;
 129
 130         if (!i2c->irq) {
 131                 while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
 132                         schedule();
 133                         if (time_after(jiffies, orig_jiffies + timeout)) {
 134                                 dev_dbg(i2c->dev, "timeout\n");
 135                                 writeccr(i2c, 0);
 136                                 result = -ETIMEDOUT;
 137                                 break;
 138                         }
 139                 }
 140                 cmd_err = readb(i2c->base + MPC_I2C_SR);
 141                 writeb(0, i2c->base + MPC_I2C_SR);
 142         } else {
 143                 /* Interrupt mode */
 144                 result = wait_event_timeout(i2c->queue,
 145                         (i2c->interrupt & CSR_MIF), timeout);
 146
 147                 if (unlikely(!(i2c->interrupt & CSR_MIF))) {
 148                         dev_dbg(i2c->dev, "wait timeout\n");
 149                         writeccr(i2c, 0);
 150                         result = -ETIMEDOUT;
 151                 }
 152
 153                 cmd_err = i2c->interrupt;
 154                 i2c->interrupt = 0;
 155         }
 156
 157         if (result < 0)
 158                 return result;
 159
 160         if (!(cmd_err & CSR_MCF)) {
 161                 dev_dbg(i2c->dev, "unfinished\n");
 162                 return -EIO;
 163         }
 164
 165         if (cmd_err & CSR_MAL) {
 166                 dev_dbg(i2c->dev, "MAL\n");
 167                 return -EAGAIN;
 168         }
 169
 170         if (writing && (cmd_err & CSR_RXAK)) {
 171                 dev_dbg(i2c->dev, "No RXAK\n");
 172                 /* generate stop */
 173                 writeccr(i2c, CCR_MEN);
 174                 return -ENXIO;
 175         }
 176         return 0;
 177 }
 178
 179 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
 180 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 181         {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
 182         {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
 183         {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
 184         {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
 185         {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
 186         {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
 187         {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
 188         {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
 189         {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
 190         {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
 191         {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
 192         {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
 193         {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
 194         {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
 195         {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
 196         {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
 197         {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
 198         {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
 199 };
 200
 201 static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
 202                                           u32 *real_clk)
 203 {
 204         const struct mpc_i2c_divider *div = NULL;
 205         unsigned int pvr = mfspr(SPRN_PVR);
 206         u32 divider;
 207         int i;
 208
 209         if (clock == MPC_I2C_CLOCK_LEGACY) {
 210                 /* see below - default fdr = 0x3f -> div = 2048 */
 211                 *real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
 212                 return -EINVAL;
 213         }
 214
 215         /* Determine divider value */
 216         divider = mpc5xxx_get_bus_frequency(node) / clock;
 217
 218         /*
 219          * We want to choose an FDR/DFSR that generates an I2C bus speed that
 220          * is equal to or lower than the requested speed.
 221          */
 222         for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
 223                 div = &mpc_i2c_dividers_52xx[i];
 224                 /* Old MPC5200 rev A CPUs do not support the high bits */
 225                 if (div->fdr & 0xc0 && pvr == 0x80822011)
 226                         continue;
 227                 if (div->divider >= divider)
 228                         break;
 229         }
 230
 231         *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
 232         return (int)div->fdr;
 233 }
 234
 235 static void mpc_i2c_setup_52xx(struct device_node *node,
 236                                          struct mpc_i2c *i2c,
 237                                          u32 clock)
 238 {
 239         int ret, fdr;
 240
 241         if (clock == MPC_I2C_CLOCK_PRESERVE) {
 242                 dev_dbg(i2c->dev, "using fdr %d\n",
 243                         readb(i2c->base + MPC_I2C_FDR));
 244                 return;
 245         }
 246
 247         ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk);
 248         fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 249
 250         writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 251
 252         if (ret >= 0)
 253                 dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
 254                          fdr);
 255 }
 256 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
 257 static void mpc_i2c_setup_52xx(struct device_node *node,
 258                                          struct mpc_i2c *i2c,
 259                                          u32 clock)
 260 {
 261 }
 262 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
 263
 264 #ifdef CONFIG_PPC_MPC512x
 265 static void mpc_i2c_setup_512x(struct device_node *node,
 266                                          struct mpc_i2c *i2c,
 267                                          u32 clock)
 268 {
 269         struct device_node *node_ctrl;
 270         void __iomem *ctrl;
 271         const u32 *pval;
 272         u32 idx;
 273
 274         /* Enable I2C interrupts for mpc5121 */
 275         node_ctrl = of_find_compatible_node(NULL, NULL,
 276                                             "fsl,mpc5121-i2c-ctrl");
 277         if (node_ctrl) {
 278                 ctrl = of_iomap(node_ctrl, 0);
 279                 if (ctrl) {
 280                         /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
 281                         pval = of_get_property(node, "reg", NULL);
 282                         idx = (*pval & 0xff) / 0x20;
 283                         setbits32(ctrl, 1 << (24 + idx * 2));
 284                         iounmap(ctrl);
 285                 }
 286                 of_node_put(node_ctrl);
 287         }
 288
 289         /* The clock setup for the 52xx works also fine for the 512x */
 290         mpc_i2c_setup_52xx(node, i2c, clock);
 291 }
 292 #else /* CONFIG_PPC_MPC512x */
 293 static void mpc_i2c_setup_512x(struct device_node *node,
 294                                          struct mpc_i2c *i2c,
 295                                          u32 clock)
 296 {
 297 }
 298 #endif /* CONFIG_PPC_MPC512x */
 299
 300 #ifdef CONFIG_FSL_SOC
 301 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
 302         {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
 303         {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
 304         {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
 305         {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
 306         {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
 307         {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
 308         {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
 309         {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
 310         {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
 311         {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
 312         {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
 313         {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
 314         {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
 315         {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
 316         {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
 317         {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
 318         {49152, 0x011e}, {61440, 0x011f}
 319 };
 320
 321 static u32 mpc_i2c_get_sec_cfg_8xxx(void)
 322 {
 323         struct device_node *node;
 324         u32 __iomem *reg;
 325         u32 val = 0;
 326
 327         node = of_find_node_by_name(NULL, "global-utilities");
 328         if (node) {
 329                 const u32 *prop = of_get_property(node, "reg", NULL);
 330                 if (prop) {
 331                         /*
 332                          * Map and check POR Device Status Register 2
 333                          * (PORDEVSR2) at 0xE0014. Note than while MPC8533
 334                          * and MPC8544 indicate SEC frequency ratio
 335                          * configuration as bit 26 in PORDEVSR2, other MPC8xxx
 336                          * parts may store it differently or may not have it
 337                          * at all.
 338                          */
 339                         reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
 340                         if (!reg)
 341                                 printk(KERN_ERR
 342                                        "Error: couldn't map PORDEVSR2\n");
 343                         else
 344                                 val = in_be32(reg) & 0x00000020; /* sec-cfg */
 345                         iounmap(reg);
 346                 }
 347         }
 348         of_node_put(node);
 349
 350         return val;
 351 }
 352
 353 static u32 mpc_i2c_get_prescaler_8xxx(void)
 354 {
 355         /*
 356          * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx
 357          * may have prescaler 1, 2, or 3, depending on the power-on
 358          * configuration.
 359          */
 360         u32 prescaler = 1;
 361
 362         /* mpc85xx */
 363         if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)
 364                 || pvr_version_is(PVR_VER_E500MC)
 365                 || pvr_version_is(PVR_VER_E5500)
 366                 || pvr_version_is(PVR_VER_E6500)) {
 367                 unsigned int svr = mfspr(SPRN_SVR);
 368
 369                 if ((SVR_SOC_VER(svr) == SVR_8540)
 370                         || (SVR_SOC_VER(svr) == SVR_8541)
 371                         || (SVR_SOC_VER(svr) == SVR_8560)
 372                         || (SVR_SOC_VER(svr) == SVR_8555)
 373                         || (SVR_SOC_VER(svr) == SVR_8610))
 374                         /* the above 85xx SoCs have prescaler 1 */
 375                         prescaler = 1;
 376                 else if ((SVR_SOC_VER(svr) == SVR_8533)
 377                         || (SVR_SOC_VER(svr) == SVR_8544))
 378                         /* the above 85xx SoCs have prescaler 3 or 2 */
 379                         prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
 380                 else
 381                         /* all the other 85xx have prescaler 2 */
 382                         prescaler = 2;
 383         }
 384
 385         return prescaler;
 386 }
 387
 388 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
 389                                           u32 *real_clk)
 390 {
 391         const struct mpc_i2c_divider *div = NULL;
 392         u32 prescaler = mpc_i2c_get_prescaler_8xxx();
 393         u32 divider;
 394         int i;
 395
 396         if (clock == MPC_I2C_CLOCK_LEGACY) {
 397                 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */
 398                 *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
 399                 return -EINVAL;
 400         }
 401
 402         divider = fsl_get_sys_freq() / clock / prescaler;
 403
 404         pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
 405                  fsl_get_sys_freq(), clock, divider);
 406
 407         /*
 408          * We want to choose an FDR/DFSR that generates an I2C bus speed that
 409          * is equal to or lower than the requested speed.
 410          */
 411         for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) {
 412                 div = &mpc_i2c_dividers_8xxx[i];
 413                 if (div->divider >= divider)
 414                         break;
 415         }
 416
 417         *real_clk = fsl_get_sys_freq() / prescaler / div->divider;
 418         return div ? (int)div->fdr : -EINVAL;
 419 }
 420
 421 static void mpc_i2c_setup_8xxx(struct device_node *node,
 422                                          struct mpc_i2c *i2c,
 423                                          u32 clock)
 424 {
 425         int ret, fdr;
 426
 427         if (clock == MPC_I2C_CLOCK_PRESERVE) {
 428                 dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
 429                         readb(i2c->base + MPC_I2C_DFSRR),
 430                         readb(i2c->base + MPC_I2C_FDR));
 431                 return;
 432         }
 433
 434         ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk);
 435         fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 436
 437         writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 438         writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
 439
 440         if (ret >= 0)
 441                 dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
 442                          i2c->real_clk, fdr >> 8, fdr & 0xff);
 443 }
 444
 445 #else /* !CONFIG_FSL_SOC */
 446 static void mpc_i2c_setup_8xxx(struct device_node *node,
 447                                          struct mpc_i2c *i2c,
 448                                          u32 clock)
 449 {
 450 }
 451 #endif /* CONFIG_FSL_SOC */
 452
 453 static void mpc_i2c_start(struct mpc_i2c *i2c)
 454 {
 455         /* Clear arbitration */
 456         writeb(0, i2c->base + MPC_I2C_SR);
 457         /* Start with MEN */
 458         writeccr(i2c, CCR_MEN);
 459 }
 460
 461 static void mpc_i2c_stop(struct mpc_i2c *i2c)
 462 {
 463         writeccr(i2c, CCR_MEN);
 464 }
 465
 466 static int mpc_write(struct mpc_i2c *i2c, int target,
 467                      const u8 *data, int length, int restart)
 468 {
 469         int i, result;
 470         unsigned timeout = i2c->adap.timeout;
 471         u32 flags = restart ? CCR_RSTA : 0;
 472
 473         /* Start as master */
 474         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
 475         /* Write target byte */
 476         writeb((target << 1), i2c->base + MPC_I2C_DR);
 477
 478         result = i2c_wait(i2c, timeout, 1);
 479         if (result < 0)
 480                 return result;
 481
 482         for (i = 0; i < length; i++) {
 483                 /* Write data byte */
 484                 writeb(data[i], i2c->base + MPC_I2C_DR);
 485
 486                 result = i2c_wait(i2c, timeout, 1);
 487                 if (result < 0)
 488                         return result;
 489         }
 490
 491         return 0;
 492 }
 493
 494 static int mpc_read(struct mpc_i2c *i2c, int target,
 495                     u8 *data, int length, int restart, bool recv_len)
 496 {
 497         unsigned timeout = i2c->adap.timeout;
 498         int i, result;
 499         u32 flags = restart ? CCR_RSTA : 0;
 500
 501         /* Switch to read - restart */
 502         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
 503         /* Write target address byte - this time with the read flag set */
 504         writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
 505
 506         result = i2c_wait(i2c, timeout, 1);
 507         if (result < 0)
 508                 return result;
 509
 510         if (length) {
 511                 if (length == 1 && !recv_len)
 512                         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
 513                 else
 514                         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
 515                 /* Dummy read */
 516                 readb(i2c->base + MPC_I2C_DR);
 517         }
 518
 519         for (i = 0; i < length; i++) {
 520                 u8 byte;
 521
 522                 result = i2c_wait(i2c, timeout, 0);
 523                 if (result < 0)
 524                         return result;
 525
 526                 /*
 527                  * For block reads, we have to know the total length (1st byte)
 528                  * before we can determine if we are done.
 529                  */
 530                 if (i || !recv_len) {
 531                         /* Generate txack on next to last byte */
 532                         if (i == length - 2)
 533                                 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
 534                                          | CCR_TXAK);
 535                         /* Do not generate stop on last byte */
 536                         if (i == length - 1)
 537                                 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
 538                                          | CCR_MTX);
 539                 }
 540
 541                 byte = readb(i2c->base + MPC_I2C_DR);
 542
 543                 /*
 544                  * Adjust length if first received byte is length.
 545                  * The length is 1 length byte plus actually data length
 546                  */
 547                 if (i == 0 && recv_len) {
 548                         if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
 549                                 return -EPROTO;
 550                         length += byte;
 551                         /*
 552                          * For block reads, generate txack here if data length
 553                          * is 1 byte (total length is 2 bytes).
 554                          */
 555                         if (length == 2)
 556                                 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
 557                                          | CCR_TXAK);
 558                 }
 559                 data[i] = byte;
 560         }
 561
 562         return length;
 563 }
 564
 565 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 566 {
 567         struct i2c_msg *pmsg;
 568         int i;
 569         int ret = 0;
 570         unsigned long orig_jiffies = jiffies;
 571         struct mpc_i2c *i2c = i2c_get_adapdata(adap);
 572
 573         mpc_i2c_start(i2c);
 574
 575         /* Allow bus up to 1s to become not busy */
 576         while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
 577                 if (signal_pending(current)) {
 578                         dev_dbg(i2c->dev, "Interrupted\n");
 579                         writeccr(i2c, 0);
 580                         return -EINTR;
 581                 }
 582                 if (time_after(jiffies, orig_jiffies + HZ)) {
 583                         u8 status = readb(i2c->base + MPC_I2C_SR);
 584
 585                         dev_dbg(i2c->dev, "timeout\n");
 586                         if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
 587                                 writeb(status & ~CSR_MAL,
 588                                        i2c->base + MPC_I2C_SR);
 589                                 mpc_i2c_fixup(i2c);
 590                         }
 591                         return -EIO;
 592                 }
 593                 schedule();
 594         }
 595
 596         for (i = 0; ret >= 0 && i < num; i++) {
 597                 pmsg = &msgs[i];
 598                 dev_dbg(i2c->dev,
 599                         "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
 600                         pmsg->flags & I2C_M_RD ? "read" : "write",
 601                         pmsg->len, pmsg->addr, i + 1, num);
 602                 if (pmsg->flags & I2C_M_RD) {
 603                         bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
 604
 605                         ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
 606                                        recv_len);
 607                         if (recv_len && ret > 0)
 608                                 pmsg->len = ret;
 609                 } else {
 610                         ret =
 611                             mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
 612                 }
 613         }
 614         mpc_i2c_stop(i2c); /* Initiate STOP */
 615         orig_jiffies = jiffies;
 616         /* Wait until STOP is seen, allow up to 1 s */
 617         while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
 618                 if (time_after(jiffies, orig_jiffies + HZ)) {
 619                         u8 status = readb(i2c->base + MPC_I2C_SR);
 620
 621                         dev_dbg(i2c->dev, "timeout\n");
 622                         if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
 623                                 writeb(status & ~CSR_MAL,
 624                                        i2c->base + MPC_I2C_SR);
 625                                 mpc_i2c_fixup(i2c);
 626                         }
 627                         return -EIO;
 628                 }
 629                 cond_resched();
 630         }
 631         return (ret < 0) ? ret : num;
 632 }
 633
 634 static u32 mpc_functionality(struct i2c_adapter *adap)
 635 {
 636         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
 637           | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
 638 }
 639
 640 static const struct i2c_algorithm mpc_algo = {
 641         .master_xfer = mpc_xfer,
 642         .functionality = mpc_functionality,
 643 };
 644
 645 static struct i2c_adapter mpc_ops = {
 646         .owner = THIS_MODULE,
 647         .algo = &mpc_algo,
 648         .timeout = HZ,
 649 };
 650
 651 static const struct of_device_id mpc_i2c_of_match[];
 652 static int fsl_i2c_probe(struct platform_device *op)
 653 {
 654         const struct of_device_id *match;
 655         struct mpc_i2c *i2c;
 656         const u32 *prop;
 657         u32 clock = MPC_I2C_CLOCK_LEGACY;
 658         int result = 0;
 659         int plen;
 660         struct resource res;
 661         struct clk *clk;
 662         int err;
 663
 664         match = of_match_device(mpc_i2c_of_match, &op->dev);
 665         if (!match)
 666                 return -EINVAL;
 667
 668         i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
 669         if (!i2c)
 670                 return -ENOMEM;
 671
 672         i2c->dev = &op->dev; /* for debug and error output */
 673
 674         init_waitqueue_head(&i2c->queue);
 675
 676         i2c->base = of_iomap(op->dev.of_node, 0);
 677         if (!i2c->base) {
 678                 dev_err(i2c->dev, "failed to map controller\n");
 679                 result = -ENOMEM;
 680                 goto fail_map;
 681         }
 682
 683         i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
 684         if (i2c->irq) { /* no i2c->irq implies polling */
 685                 result = request_irq(i2c->irq, mpc_i2c_isr,
 686                                      IRQF_SHARED, "i2c-mpc", i2c);
 687                 if (result < 0) {
 688                         dev_err(i2c->dev, "failed to attach interrupt\n");
 689                         goto fail_request;
 690                 }
 691         }
 692
 693         /*
 694          * enable clock for the I2C peripheral (non fatal),
 695          * keep a reference upon successful allocation
 696          */
 697         clk = devm_clk_get(&op->dev, NULL);
 698         if (!IS_ERR(clk)) {
 699                 err = clk_prepare_enable(clk);
 700                 if (err) {
 701                         dev_err(&op->dev, "failed to enable clock\n");
 702                         goto fail_request;
 703                 } else {
 704                         i2c->clk_per = clk;
 705                 }
 706         }
 707
 708         if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) {
 709                 clock = MPC_I2C_CLOCK_PRESERVE;
 710         } else {
 711                 prop = of_get_property(op->dev.of_node, "clock-frequency",
 712                                         &plen);
 713                 if (prop && plen == sizeof(u32))
 714                         clock = *prop;
 715         }
 716
 717         if (match->data) {
 718                 const struct mpc_i2c_data *data = match->data;
 719                 data->setup(op->dev.of_node, i2c, clock);
 720         } else {
 721                 /* Backwards compatibility */
 722                 if (of_get_property(op->dev.of_node, "dfsrr", NULL))
 723                         mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
 724         }
 725
 726         prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
 727         if (prop && plen == sizeof(u32)) {
 728                 mpc_ops.timeout = *prop * HZ / 1000000;
 729                 if (mpc_ops.timeout < 5)
 730                         mpc_ops.timeout = 5;
 731         }
 732         dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
 733
 734         platform_set_drvdata(op, i2c);
 735
 736         i2c->adap = mpc_ops;
 737         of_address_to_resource(op->dev.of_node, 0, &res);
 738         scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
 739                   "MPC adapter at 0x%llx", (unsigned long long)res.start);
 740         i2c_set_adapdata(&i2c->adap, i2c);
 741         i2c->adap.dev.parent = &op->dev;
 742         i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
 743
 744         result = i2c_add_adapter(&i2c->adap);
 745         if (result < 0)
 746                 goto fail_add;
 747
 748         return result;
 749
 750  fail_add:
 751         if (i2c->clk_per)
 752                 clk_disable_unprepare(i2c->clk_per);
 753         free_irq(i2c->irq, i2c);
 754  fail_request:
 755         irq_dispose_mapping(i2c->irq);
 756         iounmap(i2c->base);
 757  fail_map:
 758         kfree(i2c);
 759         return result;
 760 };
 761
 762 static int fsl_i2c_remove(struct platform_device *op)
 763 {
 764         struct mpc_i2c *i2c = platform_get_drvdata(op);
 765
 766         i2c_del_adapter(&i2c->adap);
 767
 768         if (i2c->clk_per)
 769                 clk_disable_unprepare(i2c->clk_per);
 770
 771         if (i2c->irq)
 772                 free_irq(i2c->irq, i2c);
 773
 774         irq_dispose_mapping(i2c->irq);
 775         iounmap(i2c->base);
 776         kfree(i2c);
 777         return 0;
 778 };
 779
 780 #ifdef CONFIG_PM_SLEEP
 781 static int mpc_i2c_suspend(struct device *dev)
 782 {
 783         struct mpc_i2c *i2c = dev_get_drvdata(dev);
 784
 785         i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
 786         i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
 787
 788         return 0;
 789 }
 790
 791 static int mpc_i2c_resume(struct device *dev)
 792 {
 793         struct mpc_i2c *i2c = dev_get_drvdata(dev);
 794
 795         writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
 796         writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
 797
 798         return 0;
 799 }
 800
 801 static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
 802 #define MPC_I2C_PM_OPS  (&mpc_i2c_pm_ops)
 803 #else
 804 #define MPC_I2C_PM_OPS  NULL
 805 #endif
 806
 807 static const struct mpc_i2c_data mpc_i2c_data_512x = {
 808         .setup = mpc_i2c_setup_512x,
 809 };
 810
 811 static const struct mpc_i2c_data mpc_i2c_data_52xx = {
 812         .setup = mpc_i2c_setup_52xx,
 813 };
 814
 815 static const struct mpc_i2c_data mpc_i2c_data_8313 = {
 816         .setup = mpc_i2c_setup_8xxx,
 817 };
 818
 819 static const struct mpc_i2c_data mpc_i2c_data_8543 = {
 820         .setup = mpc_i2c_setup_8xxx,
 821 };
 822
 823 static const struct mpc_i2c_data mpc_i2c_data_8544 = {
 824         .setup = mpc_i2c_setup_8xxx,
 825 };
 826
 827 static const struct of_device_id mpc_i2c_of_match[] = {
 828         {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
 829         {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
 830         {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
 831         {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
 832         {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
 833         {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
 834         {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
 835         /* Backward compatibility */
 836         {.compatible = "fsl-i2c", },
 837         {},
 838 };
 839 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
 840
 841 /* Structure for a device driver */
 842 static struct platform_driver mpc_i2c_driver = {
 843         .probe          = fsl_i2c_probe,
 844         .remove         = fsl_i2c_remove,
 845         .driver = {
 846                 .name = DRV_NAME,
 847                 .of_match_table = mpc_i2c_of_match,
 848                 .pm = MPC_I2C_PM_OPS,
 849         },
 850 };
 851
 852 module_platform_driver(mpc_i2c_driver);
 853
 854 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
 855 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
 856                    "MPC824x/83xx/85xx/86xx/512x/52xx processors");
 857 MODULE_LICENSE("GPL");