2 * Copyright © 2012-2014 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 * Eugeni Dodonov <eugeni.dodonov@intel.com>
25 * Daniel Vetter <daniel.vetter@ffwll.ch>
29 #include <linux/pm_runtime.h>
30 #include <linux/vgaarb.h>
33 #include "intel_drv.h"
38 * The i915 driver supports dynamic enabling and disabling of entire hardware
39 * blocks at runtime. This is especially important on the display side where
40 * software is supposed to control many power gates manually on recent hardware,
41 * since on the GT side a lot of the power management is done by the hardware.
42 * But even there some manual control at the device level is required.
44 * Since i915 supports a diverse set of platforms with a unified codebase and
45 * hardware engineers just love to shuffle functionality around between power
46 * domains there's a sizeable amount of indirection required. This file provides
47 * generic functions to the driver for grabbing and releasing references for
48 * abstract power domains. It then maps those to the actual power wells
49 * present for a given platform.
52 bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
53 enum i915_power_well_id power_well_id);
55 static struct i915_power_well *
56 lookup_power_well(struct drm_i915_private *dev_priv,
57 enum i915_power_well_id power_well_id);
60 intel_display_power_domain_str(enum intel_display_power_domain domain)
63 case POWER_DOMAIN_PIPE_A:
65 case POWER_DOMAIN_PIPE_B:
67 case POWER_DOMAIN_PIPE_C:
69 case POWER_DOMAIN_PIPE_A_PANEL_FITTER:
70 return "PIPE_A_PANEL_FITTER";
71 case POWER_DOMAIN_PIPE_B_PANEL_FITTER:
72 return "PIPE_B_PANEL_FITTER";
73 case POWER_DOMAIN_PIPE_C_PANEL_FITTER:
74 return "PIPE_C_PANEL_FITTER";
75 case POWER_DOMAIN_TRANSCODER_A:
76 return "TRANSCODER_A";
77 case POWER_DOMAIN_TRANSCODER_B:
78 return "TRANSCODER_B";
79 case POWER_DOMAIN_TRANSCODER_C:
80 return "TRANSCODER_C";
81 case POWER_DOMAIN_TRANSCODER_EDP:
82 return "TRANSCODER_EDP";
83 case POWER_DOMAIN_TRANSCODER_DSI_A:
84 return "TRANSCODER_DSI_A";
85 case POWER_DOMAIN_TRANSCODER_DSI_C:
86 return "TRANSCODER_DSI_C";
87 case POWER_DOMAIN_PORT_DDI_A_LANES:
88 return "PORT_DDI_A_LANES";
89 case POWER_DOMAIN_PORT_DDI_B_LANES:
90 return "PORT_DDI_B_LANES";
91 case POWER_DOMAIN_PORT_DDI_C_LANES:
92 return "PORT_DDI_C_LANES";
93 case POWER_DOMAIN_PORT_DDI_D_LANES:
94 return "PORT_DDI_D_LANES";
95 case POWER_DOMAIN_PORT_DDI_E_LANES:
96 return "PORT_DDI_E_LANES";
97 case POWER_DOMAIN_PORT_DDI_A_IO:
98 return "PORT_DDI_A_IO";
99 case POWER_DOMAIN_PORT_DDI_B_IO:
100 return "PORT_DDI_B_IO";
101 case POWER_DOMAIN_PORT_DDI_C_IO:
102 return "PORT_DDI_C_IO";
103 case POWER_DOMAIN_PORT_DDI_D_IO:
104 return "PORT_DDI_D_IO";
105 case POWER_DOMAIN_PORT_DDI_E_IO:
106 return "PORT_DDI_E_IO";
107 case POWER_DOMAIN_PORT_DSI:
109 case POWER_DOMAIN_PORT_CRT:
111 case POWER_DOMAIN_PORT_OTHER:
113 case POWER_DOMAIN_VGA:
115 case POWER_DOMAIN_AUDIO:
117 case POWER_DOMAIN_PLLS:
119 case POWER_DOMAIN_AUX_A:
121 case POWER_DOMAIN_AUX_B:
123 case POWER_DOMAIN_AUX_C:
125 case POWER_DOMAIN_AUX_D:
127 case POWER_DOMAIN_GMBUS:
129 case POWER_DOMAIN_INIT:
131 case POWER_DOMAIN_MODESET:
134 MISSING_CASE(domain);
139 static void intel_power_well_enable(struct drm_i915_private *dev_priv,
140 struct i915_power_well *power_well)
142 DRM_DEBUG_KMS("enabling %s\n", power_well->name);
143 power_well->ops->enable(dev_priv, power_well);
144 power_well->hw_enabled = true;
147 static void intel_power_well_disable(struct drm_i915_private *dev_priv,
148 struct i915_power_well *power_well)
150 DRM_DEBUG_KMS("disabling %s\n", power_well->name);
151 power_well->hw_enabled = false;
152 power_well->ops->disable(dev_priv, power_well);
155 static void intel_power_well_get(struct drm_i915_private *dev_priv,
156 struct i915_power_well *power_well)
158 if (!power_well->count++)
159 intel_power_well_enable(dev_priv, power_well);
162 static void intel_power_well_put(struct drm_i915_private *dev_priv,
163 struct i915_power_well *power_well)
165 WARN(!power_well->count, "Use count on power well %s is already zero",
168 if (!--power_well->count)
169 intel_power_well_disable(dev_priv, power_well);
173 * __intel_display_power_is_enabled - unlocked check for a power domain
174 * @dev_priv: i915 device instance
175 * @domain: power domain to check
177 * This is the unlocked version of intel_display_power_is_enabled() and should
178 * only be used from error capture and recovery code where deadlocks are
182 * True when the power domain is enabled, false otherwise.
184 bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
185 enum intel_display_power_domain domain)
187 struct i915_power_well *power_well;
190 if (dev_priv->runtime_pm.suspended)
195 for_each_power_domain_well_rev(dev_priv, power_well, BIT_ULL(domain)) {
196 if (power_well->always_on)
199 if (!power_well->hw_enabled) {
209 * intel_display_power_is_enabled - check for a power domain
210 * @dev_priv: i915 device instance
211 * @domain: power domain to check
213 * This function can be used to check the hw power domain state. It is mostly
214 * used in hardware state readout functions. Everywhere else code should rely
215 * upon explicit power domain reference counting to ensure that the hardware
216 * block is powered up before accessing it.
218 * Callers must hold the relevant modesetting locks to ensure that concurrent
219 * threads can't disable the power well while the caller tries to read a few
223 * True when the power domain is enabled, false otherwise.
225 bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
226 enum intel_display_power_domain domain)
228 struct i915_power_domains *power_domains;
231 power_domains = &dev_priv->power_domains;
233 mutex_lock(&power_domains->lock);
234 ret = __intel_display_power_is_enabled(dev_priv, domain);
235 mutex_unlock(&power_domains->lock);
241 * intel_display_set_init_power - set the initial power domain state
242 * @dev_priv: i915 device instance
243 * @enable: whether to enable or disable the initial power domain state
245 * For simplicity our driver load/unload and system suspend/resume code assumes
246 * that all power domains are always enabled. This functions controls the state
247 * of this little hack. While the initial power domain state is enabled runtime
248 * pm is effectively disabled.
250 void intel_display_set_init_power(struct drm_i915_private *dev_priv,
253 if (dev_priv->power_domains.init_power_on == enable)
257 intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
259 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
261 dev_priv->power_domains.init_power_on = enable;
265 * Starting with Haswell, we have a "Power Down Well" that can be turned off
266 * when not needed anymore. We have 4 registers that can request the power well
267 * to be enabled, and it will only be disabled if none of the registers is
268 * requesting it to be enabled.
270 static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv,
271 u8 irq_pipe_mask, bool has_vga)
273 struct pci_dev *pdev = dev_priv->drm.pdev;
276 * After we re-enable the power well, if we touch VGA register 0x3d5
277 * we'll get unclaimed register interrupts. This stops after we write
278 * anything to the VGA MSR register. The vgacon module uses this
279 * register all the time, so if we unbind our driver and, as a
280 * consequence, bind vgacon, we'll get stuck in an infinite loop at
281 * console_unlock(). So make here we touch the VGA MSR register, making
282 * sure vgacon can keep working normally without triggering interrupts
283 * and error messages.
286 vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
287 outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
288 vga_put(pdev, VGA_RSRC_LEGACY_IO);
292 gen8_irq_power_well_post_enable(dev_priv, irq_pipe_mask);
295 static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv,
299 gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask);
303 static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
304 struct i915_power_well *power_well)
306 enum i915_power_well_id id = power_well->id;
308 /* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */
309 WARN_ON(intel_wait_for_register(dev_priv,
310 HSW_PWR_WELL_CTL_DRIVER(id),
311 HSW_PWR_WELL_CTL_STATE(id),
312 HSW_PWR_WELL_CTL_STATE(id),
316 static u32 hsw_power_well_requesters(struct drm_i915_private *dev_priv,
317 enum i915_power_well_id id)
319 u32 req_mask = HSW_PWR_WELL_CTL_REQ(id);
322 ret = I915_READ(HSW_PWR_WELL_CTL_BIOS(id)) & req_mask ? 1 : 0;
323 ret |= I915_READ(HSW_PWR_WELL_CTL_DRIVER(id)) & req_mask ? 2 : 0;
324 ret |= I915_READ(HSW_PWR_WELL_CTL_KVMR) & req_mask ? 4 : 0;
325 ret |= I915_READ(HSW_PWR_WELL_CTL_DEBUG(id)) & req_mask ? 8 : 0;
330 static void hsw_wait_for_power_well_disable(struct drm_i915_private *dev_priv,
331 struct i915_power_well *power_well)
333 enum i915_power_well_id id = power_well->id;
338 * Bspec doesn't require waiting for PWs to get disabled, but still do
339 * this for paranoia. The known cases where a PW will be forced on:
340 * - a KVMR request on any power well via the KVMR request register
341 * - a DMC request on PW1 and MISC_IO power wells via the BIOS and
342 * DEBUG request registers
343 * Skip the wait in case any of the request bits are set and print a
344 * diagnostic message.
346 wait_for((disabled = !(I915_READ(HSW_PWR_WELL_CTL_DRIVER(id)) &
347 HSW_PWR_WELL_CTL_STATE(id))) ||
348 (reqs = hsw_power_well_requesters(dev_priv, id)), 1);
352 DRM_DEBUG_KMS("%s forced on (bios:%d driver:%d kvmr:%d debug:%d)\n",
354 !!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8));
357 static void gen9_wait_for_power_well_fuses(struct drm_i915_private *dev_priv,
358 enum skl_power_gate pg)
360 /* Timeout 5us for PG#0, for other PGs 1us */
361 WARN_ON(intel_wait_for_register(dev_priv, SKL_FUSE_STATUS,
362 SKL_FUSE_PG_DIST_STATUS(pg),
363 SKL_FUSE_PG_DIST_STATUS(pg), 1));
366 static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
367 struct i915_power_well *power_well)
369 enum i915_power_well_id id = power_well->id;
370 bool wait_fuses = power_well->hsw.has_fuses;
371 enum skl_power_gate uninitialized_var(pg);
375 pg = SKL_PW_TO_PG(id);
377 * For PW1 we have to wait both for the PW0/PG0 fuse state
378 * before enabling the power well and PW1/PG1's own fuse
379 * state after the enabling. For all other power wells with
380 * fuses we only have to wait for that PW/PG's fuse state
381 * after the enabling.
384 gen9_wait_for_power_well_fuses(dev_priv, SKL_PG0);
387 val = I915_READ(HSW_PWR_WELL_CTL_DRIVER(id));
388 I915_WRITE(HSW_PWR_WELL_CTL_DRIVER(id), val | HSW_PWR_WELL_CTL_REQ(id));
389 hsw_wait_for_power_well_enable(dev_priv, power_well);
392 gen9_wait_for_power_well_fuses(dev_priv, pg);
394 hsw_power_well_post_enable(dev_priv, power_well->hsw.irq_pipe_mask,
395 power_well->hsw.has_vga);
398 static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
399 struct i915_power_well *power_well)
401 enum i915_power_well_id id = power_well->id;
404 hsw_power_well_pre_disable(dev_priv, power_well->hsw.irq_pipe_mask);
406 val = I915_READ(HSW_PWR_WELL_CTL_DRIVER(id));
407 I915_WRITE(HSW_PWR_WELL_CTL_DRIVER(id),
408 val & ~HSW_PWR_WELL_CTL_REQ(id));
409 hsw_wait_for_power_well_disable(dev_priv, power_well);
413 * We should only use the power well if we explicitly asked the hardware to
414 * enable it, so check if it's enabled and also check if we've requested it to
417 static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
418 struct i915_power_well *power_well)
420 enum i915_power_well_id id = power_well->id;
421 u32 mask = HSW_PWR_WELL_CTL_REQ(id) | HSW_PWR_WELL_CTL_STATE(id);
423 return (I915_READ(HSW_PWR_WELL_CTL_DRIVER(id)) & mask) == mask;
426 static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
428 enum i915_power_well_id id = SKL_DISP_PW_2;
430 WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
431 "DC9 already programmed to be enabled.\n");
432 WARN_ONCE(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
433 "DC5 still not disabled to enable DC9.\n");
434 WARN_ONCE(I915_READ(HSW_PWR_WELL_CTL_DRIVER(id)) &
435 HSW_PWR_WELL_CTL_REQ(id),
436 "Power well 2 on.\n");
437 WARN_ONCE(intel_irqs_enabled(dev_priv),
438 "Interrupts not disabled yet.\n");
441 * TODO: check for the following to verify the conditions to enter DC9
442 * state are satisfied:
443 * 1] Check relevant display engine registers to verify if mode set
444 * disable sequence was followed.
445 * 2] Check if display uninitialize sequence is initialized.
449 static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
451 WARN_ONCE(intel_irqs_enabled(dev_priv),
452 "Interrupts not disabled yet.\n");
453 WARN_ONCE(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
454 "DC5 still not disabled.\n");
457 * TODO: check for the following to verify DC9 state was indeed
458 * entered before programming to disable it:
459 * 1] Check relevant display engine registers to verify if mode
460 * set disable sequence was followed.
461 * 2] Check if display uninitialize sequence is initialized.
465 static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
472 I915_WRITE(DC_STATE_EN, state);
474 /* It has been observed that disabling the dc6 state sometimes
475 * doesn't stick and dmc keeps returning old value. Make sure
476 * the write really sticks enough times and also force rewrite until
477 * we are confident that state is exactly what we want.
480 v = I915_READ(DC_STATE_EN);
483 I915_WRITE(DC_STATE_EN, state);
486 } else if (rereads++ > 5) {
490 } while (rewrites < 100);
493 DRM_ERROR("Writing dc state to 0x%x failed, now 0x%x\n",
496 /* Most of the times we need one retry, avoid spam */
498 DRM_DEBUG_KMS("Rewrote dc state to 0x%x %d times\n",
502 static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
506 mask = DC_STATE_EN_UPTO_DC5;
507 if (IS_GEN9_LP(dev_priv))
508 mask |= DC_STATE_EN_DC9;
510 mask |= DC_STATE_EN_UPTO_DC6;
515 void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv)
519 val = I915_READ(DC_STATE_EN) & gen9_dc_mask(dev_priv);
521 DRM_DEBUG_KMS("Resetting DC state tracking from %02x to %02x\n",
522 dev_priv->csr.dc_state, val);
523 dev_priv->csr.dc_state = val;
526 static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
531 if (WARN_ON_ONCE(state & ~dev_priv->csr.allowed_dc_mask))
532 state &= dev_priv->csr.allowed_dc_mask;
534 val = I915_READ(DC_STATE_EN);
535 mask = gen9_dc_mask(dev_priv);
536 DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
539 /* Check if DMC is ignoring our DC state requests */
540 if ((val & mask) != dev_priv->csr.dc_state)
541 DRM_ERROR("DC state mismatch (0x%x -> 0x%x)\n",
542 dev_priv->csr.dc_state, val & mask);
547 gen9_write_dc_state(dev_priv, val);
549 dev_priv->csr.dc_state = val & mask;
552 void bxt_enable_dc9(struct drm_i915_private *dev_priv)
554 assert_can_enable_dc9(dev_priv);
556 DRM_DEBUG_KMS("Enabling DC9\n");
558 intel_power_sequencer_reset(dev_priv);
559 gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
562 void bxt_disable_dc9(struct drm_i915_private *dev_priv)
564 assert_can_disable_dc9(dev_priv);
566 DRM_DEBUG_KMS("Disabling DC9\n");
568 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
570 intel_pps_unlock_regs_wa(dev_priv);
573 static void assert_csr_loaded(struct drm_i915_private *dev_priv)
575 WARN_ONCE(!I915_READ(CSR_PROGRAM(0)),
576 "CSR program storage start is NULL\n");
577 WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n");
578 WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n");
581 static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
583 bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv,
586 WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n");
588 WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5),
589 "DC5 already programmed to be enabled.\n");
590 assert_rpm_wakelock_held(dev_priv);
592 assert_csr_loaded(dev_priv);
595 void gen9_enable_dc5(struct drm_i915_private *dev_priv)
597 assert_can_enable_dc5(dev_priv);
599 DRM_DEBUG_KMS("Enabling DC5\n");
601 gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
604 static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
606 WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
607 "Backlight is not disabled.\n");
608 WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
609 "DC6 already programmed to be enabled.\n");
611 assert_csr_loaded(dev_priv);
614 void skl_enable_dc6(struct drm_i915_private *dev_priv)
616 assert_can_enable_dc6(dev_priv);
618 DRM_DEBUG_KMS("Enabling DC6\n");
620 gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
624 void skl_disable_dc6(struct drm_i915_private *dev_priv)
626 DRM_DEBUG_KMS("Disabling DC6\n");
628 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
631 static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
632 struct i915_power_well *power_well)
634 enum i915_power_well_id id = power_well->id;
635 u32 mask = HSW_PWR_WELL_CTL_REQ(id);
636 u32 bios_req = I915_READ(HSW_PWR_WELL_CTL_BIOS(id));
638 /* Take over the request bit if set by BIOS. */
639 if (bios_req & mask) {
640 u32 drv_req = I915_READ(HSW_PWR_WELL_CTL_DRIVER(id));
642 if (!(drv_req & mask))
643 I915_WRITE(HSW_PWR_WELL_CTL_DRIVER(id), drv_req | mask);
644 I915_WRITE(HSW_PWR_WELL_CTL_BIOS(id), bios_req & ~mask);
648 static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
649 struct i915_power_well *power_well)
651 bxt_ddi_phy_init(dev_priv, power_well->bxt.phy);
654 static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
655 struct i915_power_well *power_well)
657 bxt_ddi_phy_uninit(dev_priv, power_well->bxt.phy);
660 static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv,
661 struct i915_power_well *power_well)
663 return bxt_ddi_phy_is_enabled(dev_priv, power_well->bxt.phy);
666 static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
668 struct i915_power_well *power_well;
670 power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
671 if (power_well->count > 0)
672 bxt_ddi_phy_verify_state(dev_priv, power_well->bxt.phy);
674 power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_BC);
675 if (power_well->count > 0)
676 bxt_ddi_phy_verify_state(dev_priv, power_well->bxt.phy);
678 if (IS_GEMINILAKE(dev_priv)) {
679 power_well = lookup_power_well(dev_priv, GLK_DPIO_CMN_C);
680 if (power_well->count > 0)
681 bxt_ddi_phy_verify_state(dev_priv, power_well->bxt.phy);
685 static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
686 struct i915_power_well *power_well)
688 return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0;
691 static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
693 u32 tmp = I915_READ(DBUF_CTL);
695 WARN((tmp & (DBUF_POWER_STATE | DBUF_POWER_REQUEST)) !=
696 (DBUF_POWER_STATE | DBUF_POWER_REQUEST),
697 "Unexpected DBuf power power state (0x%08x)\n", tmp);
700 static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
701 struct i915_power_well *power_well)
703 struct intel_cdclk_state cdclk_state = {};
705 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
707 dev_priv->display.get_cdclk(dev_priv, &cdclk_state);
708 WARN_ON(!intel_cdclk_state_compare(&dev_priv->cdclk.hw, &cdclk_state));
710 gen9_assert_dbuf_enabled(dev_priv);
712 if (IS_GEN9_LP(dev_priv))
713 bxt_verify_ddi_phy_power_wells(dev_priv);
716 static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
717 struct i915_power_well *power_well)
719 if (!dev_priv->csr.dmc_payload)
722 if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC6)
723 skl_enable_dc6(dev_priv);
724 else if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5)
725 gen9_enable_dc5(dev_priv);
728 static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv,
729 struct i915_power_well *power_well)
733 static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
734 struct i915_power_well *power_well)
738 static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
739 struct i915_power_well *power_well)
744 static void i830_pipes_power_well_enable(struct drm_i915_private *dev_priv,
745 struct i915_power_well *power_well)
747 if ((I915_READ(PIPECONF(PIPE_A)) & PIPECONF_ENABLE) == 0)
748 i830_enable_pipe(dev_priv, PIPE_A);
749 if ((I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE) == 0)
750 i830_enable_pipe(dev_priv, PIPE_B);
753 static void i830_pipes_power_well_disable(struct drm_i915_private *dev_priv,
754 struct i915_power_well *power_well)
756 i830_disable_pipe(dev_priv, PIPE_B);
757 i830_disable_pipe(dev_priv, PIPE_A);
760 static bool i830_pipes_power_well_enabled(struct drm_i915_private *dev_priv,
761 struct i915_power_well *power_well)
763 return I915_READ(PIPECONF(PIPE_A)) & PIPECONF_ENABLE &&
764 I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
767 static void i830_pipes_power_well_sync_hw(struct drm_i915_private *dev_priv,
768 struct i915_power_well *power_well)
770 if (power_well->count > 0)
771 i830_pipes_power_well_enable(dev_priv, power_well);
773 i830_pipes_power_well_disable(dev_priv, power_well);
776 static void vlv_set_power_well(struct drm_i915_private *dev_priv,
777 struct i915_power_well *power_well, bool enable)
779 enum i915_power_well_id power_well_id = power_well->id;
784 mask = PUNIT_PWRGT_MASK(power_well_id);
785 state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
786 PUNIT_PWRGT_PWR_GATE(power_well_id);
788 mutex_lock(&dev_priv->pcu_lock);
791 ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
796 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
799 vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
801 if (wait_for(COND, 100))
802 DRM_ERROR("timeout setting power well state %08x (%08x)\n",
804 vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
809 mutex_unlock(&dev_priv->pcu_lock);
812 static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
813 struct i915_power_well *power_well)
815 vlv_set_power_well(dev_priv, power_well, true);
818 static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
819 struct i915_power_well *power_well)
821 vlv_set_power_well(dev_priv, power_well, false);
824 static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
825 struct i915_power_well *power_well)
827 enum i915_power_well_id power_well_id = power_well->id;
828 bool enabled = false;
833 mask = PUNIT_PWRGT_MASK(power_well_id);
834 ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
836 mutex_lock(&dev_priv->pcu_lock);
838 state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
840 * We only ever set the power-on and power-gate states, anything
841 * else is unexpected.
843 WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
844 state != PUNIT_PWRGT_PWR_GATE(power_well_id));
849 * A transient state at this point would mean some unexpected party
850 * is poking at the power controls too.
852 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
853 WARN_ON(ctrl != state);
855 mutex_unlock(&dev_priv->pcu_lock);
860 static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
865 * On driver load, a pipe may be active and driving a DSI display.
866 * Preserve DPOUNIT_CLOCK_GATE_DISABLE to avoid the pipe getting stuck
867 * (and never recovering) in this case. intel_dsi_post_disable() will
868 * clear it when we turn off the display.
870 val = I915_READ(DSPCLK_GATE_D);
871 val &= DPOUNIT_CLOCK_GATE_DISABLE;
872 val |= VRHUNIT_CLOCK_GATE_DISABLE;
873 I915_WRITE(DSPCLK_GATE_D, val);
876 * Disable trickle feed and enable pnd deadline calculation
878 I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
879 I915_WRITE(CBR1_VLV, 0);
881 WARN_ON(dev_priv->rawclk_freq == 0);
883 I915_WRITE(RAWCLK_FREQ_VLV,
884 DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 1000));
887 static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
889 struct intel_encoder *encoder;
893 * Enable the CRI clock source so we can get at the
894 * display and the reference clock for VGA
895 * hotplug / manual detection. Supposedly DSI also
896 * needs the ref clock up and running.
898 * CHV DPLL B/C have some issues if VGA mode is enabled.
900 for_each_pipe(dev_priv, pipe) {
901 u32 val = I915_READ(DPLL(pipe));
903 val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
905 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
907 I915_WRITE(DPLL(pipe), val);
910 vlv_init_display_clock_gating(dev_priv);
912 spin_lock_irq(&dev_priv->irq_lock);
913 valleyview_enable_display_irqs(dev_priv);
914 spin_unlock_irq(&dev_priv->irq_lock);
917 * During driver initialization/resume we can avoid restoring the
918 * part of the HW/SW state that will be inited anyway explicitly.
920 if (dev_priv->power_domains.initializing)
923 intel_hpd_init(dev_priv);
925 /* Re-enable the ADPA, if we have one */
926 for_each_intel_encoder(&dev_priv->drm, encoder) {
927 if (encoder->type == INTEL_OUTPUT_ANALOG)
928 intel_crt_reset(&encoder->base);
931 i915_redisable_vga_power_on(dev_priv);
933 intel_pps_unlock_regs_wa(dev_priv);
936 static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
938 spin_lock_irq(&dev_priv->irq_lock);
939 valleyview_disable_display_irqs(dev_priv);
940 spin_unlock_irq(&dev_priv->irq_lock);
942 /* make sure we're done processing display irqs */
943 synchronize_irq(dev_priv->drm.irq);
945 intel_power_sequencer_reset(dev_priv);
947 /* Prevent us from re-enabling polling on accident in late suspend */
948 if (!dev_priv->drm.dev->power.is_suspended)
949 intel_hpd_poll_init(dev_priv);
952 static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
953 struct i915_power_well *power_well)
955 WARN_ON_ONCE(power_well->id != PUNIT_POWER_WELL_DISP2D);
957 vlv_set_power_well(dev_priv, power_well, true);
959 vlv_display_power_well_init(dev_priv);
962 static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
963 struct i915_power_well *power_well)
965 WARN_ON_ONCE(power_well->id != PUNIT_POWER_WELL_DISP2D);
967 vlv_display_power_well_deinit(dev_priv);
969 vlv_set_power_well(dev_priv, power_well, false);
972 static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
973 struct i915_power_well *power_well)
975 WARN_ON_ONCE(power_well->id != PUNIT_POWER_WELL_DPIO_CMN_BC);
977 /* since ref/cri clock was enabled */
978 udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
980 vlv_set_power_well(dev_priv, power_well, true);
983 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
984 * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
985 * a. GUnit 0x2110 bit[0] set to 1 (def 0)
986 * b. The other bits such as sfr settings / modesel may all
989 * This should only be done on init and resume from S3 with
990 * both PLLs disabled, or we risk losing DPIO and PLL
993 I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
996 static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
997 struct i915_power_well *power_well)
1001 WARN_ON_ONCE(power_well->id != PUNIT_POWER_WELL_DPIO_CMN_BC);
1003 for_each_pipe(dev_priv, pipe)
1004 assert_pll_disabled(dev_priv, pipe);
1006 /* Assert common reset */
1007 I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
1009 vlv_set_power_well(dev_priv, power_well, false);
1012 #define POWER_DOMAIN_MASK (GENMASK_ULL(POWER_DOMAIN_NUM - 1, 0))
1014 static struct i915_power_well *
1015 lookup_power_well(struct drm_i915_private *dev_priv,
1016 enum i915_power_well_id power_well_id)
1018 struct i915_power_domains *power_domains = &dev_priv->power_domains;
1021 for (i = 0; i < power_domains->power_well_count; i++) {
1022 struct i915_power_well *power_well;
1024 power_well = &power_domains->power_wells[i];
1025 if (power_well->id == power_well_id)
1032 #define BITS_SET(val, bits) (((val) & (bits)) == (bits))
1034 static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
1036 struct i915_power_well *cmn_bc =
1037 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
1038 struct i915_power_well *cmn_d =
1039 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
1040 u32 phy_control = dev_priv->chv_phy_control;
1042 u32 phy_status_mask = 0xffffffff;
1045 * The BIOS can leave the PHY is some weird state
1046 * where it doesn't fully power down some parts.
1047 * Disable the asserts until the PHY has been fully
1048 * reset (ie. the power well has been disabled at
1051 if (!dev_priv->chv_phy_assert[DPIO_PHY0])
1052 phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) |
1053 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) |
1054 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) |
1055 PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) |
1056 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) |
1057 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1));
1059 if (!dev_priv->chv_phy_assert[DPIO_PHY1])
1060 phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) |
1061 PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) |
1062 PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1));
1064 if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
1065 phy_status |= PHY_POWERGOOD(DPIO_PHY0);
1067 /* this assumes override is only used to enable lanes */
1068 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0)
1069 phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0);
1071 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0)
1072 phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1);
1074 /* CL1 is on whenever anything is on in either channel */
1075 if (BITS_SET(phy_control,
1076 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) |
1077 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)))
1078 phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0);
1081 * The DPLLB check accounts for the pipe B + port A usage
1082 * with CL2 powered up but all the lanes in the second channel
1085 if (BITS_SET(phy_control,
1086 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
1087 (I915_READ(DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
1088 phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
1090 if (BITS_SET(phy_control,
1091 PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0)))
1092 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0);
1093 if (BITS_SET(phy_control,
1094 PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0)))
1095 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1);
1097 if (BITS_SET(phy_control,
1098 PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1)))
1099 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0);
1100 if (BITS_SET(phy_control,
1101 PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1)))
1102 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1);
1105 if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
1106 phy_status |= PHY_POWERGOOD(DPIO_PHY1);
1108 /* this assumes override is only used to enable lanes */
1109 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0)
1110 phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0);
1112 if (BITS_SET(phy_control,
1113 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0)))
1114 phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0);
1116 if (BITS_SET(phy_control,
1117 PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0)))
1118 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0);
1119 if (BITS_SET(phy_control,
1120 PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0)))
1121 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1);
1124 phy_status &= phy_status_mask;
1127 * The PHY may be busy with some initial calibration and whatnot,
1128 * so the power state can take a while to actually change.
1130 if (intel_wait_for_register(dev_priv,
1135 DRM_ERROR("Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
1136 I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask,
1137 phy_status, dev_priv->chv_phy_control);
1142 static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
1143 struct i915_power_well *power_well)
1149 WARN_ON_ONCE(power_well->id != PUNIT_POWER_WELL_DPIO_CMN_BC &&
1150 power_well->id != PUNIT_POWER_WELL_DPIO_CMN_D);
1152 if (power_well->id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
1160 /* since ref/cri clock was enabled */
1161 udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
1162 vlv_set_power_well(dev_priv, power_well, true);
1164 /* Poll for phypwrgood signal */
1165 if (intel_wait_for_register(dev_priv,
1170 DRM_ERROR("Display PHY %d is not power up\n", phy);
1172 mutex_lock(&dev_priv->sb_lock);
1174 /* Enable dynamic power down */
1175 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28);
1176 tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN |
1177 DPIO_SUS_CLK_CONFIG_GATE_CLKREQ;
1178 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp);
1180 if (power_well->id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
1181 tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1);
1182 tmp |= DPIO_DYNPWRDOWNEN_CH1;
1183 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp);
1186 * Force the non-existing CL2 off. BXT does this
1187 * too, so maybe it saves some power even though
1188 * CL2 doesn't exist?
1190 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
1191 tmp |= DPIO_CL2_LDOFUSE_PWRENB;
1192 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp);
1195 mutex_unlock(&dev_priv->sb_lock);
1197 dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy);
1198 I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1200 DRM_DEBUG_KMS("Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
1201 phy, dev_priv->chv_phy_control);
1203 assert_chv_phy_status(dev_priv);
1206 static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
1207 struct i915_power_well *power_well)
1211 WARN_ON_ONCE(power_well->id != PUNIT_POWER_WELL_DPIO_CMN_BC &&
1212 power_well->id != PUNIT_POWER_WELL_DPIO_CMN_D);
1214 if (power_well->id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
1216 assert_pll_disabled(dev_priv, PIPE_A);
1217 assert_pll_disabled(dev_priv, PIPE_B);
1220 assert_pll_disabled(dev_priv, PIPE_C);
1223 dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy);
1224 I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1226 vlv_set_power_well(dev_priv, power_well, false);
1228 DRM_DEBUG_KMS("Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
1229 phy, dev_priv->chv_phy_control);
1231 /* PHY is fully reset now, so we can enable the PHY state asserts */
1232 dev_priv->chv_phy_assert[phy] = true;
1234 assert_chv_phy_status(dev_priv);
1237 static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy,
1238 enum dpio_channel ch, bool override, unsigned int mask)
1240 enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C;
1241 u32 reg, val, expected, actual;
1244 * The BIOS can leave the PHY is some weird state
1245 * where it doesn't fully power down some parts.
1246 * Disable the asserts until the PHY has been fully
1247 * reset (ie. the power well has been disabled at
1250 if (!dev_priv->chv_phy_assert[phy])
1254 reg = _CHV_CMN_DW0_CH0;
1256 reg = _CHV_CMN_DW6_CH1;
1258 mutex_lock(&dev_priv->sb_lock);
1259 val = vlv_dpio_read(dev_priv, pipe, reg);
1260 mutex_unlock(&dev_priv->sb_lock);
1263 * This assumes !override is only used when the port is disabled.
1264 * All lanes should power down even without the override when
1265 * the port is disabled.
1267 if (!override || mask == 0xf) {
1268 expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
1270 * If CH1 common lane is not active anymore
1271 * (eg. for pipe B DPLL) the entire channel will
1272 * shut down, which causes the common lane registers
1273 * to read as 0. That means we can't actually check
1274 * the lane power down status bits, but as the entire
1275 * register reads as 0 it's a good indication that the
1276 * channel is indeed entirely powered down.
1278 if (ch == DPIO_CH1 && val == 0)
1280 } else if (mask != 0x0) {
1281 expected = DPIO_ANYDL_POWERDOWN;
1287 actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0;
1289 actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1;
1290 actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
1292 WARN(actual != expected,
1293 "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n",
1294 !!(actual & DPIO_ALLDL_POWERDOWN), !!(actual & DPIO_ANYDL_POWERDOWN),
1295 !!(expected & DPIO_ALLDL_POWERDOWN), !!(expected & DPIO_ANYDL_POWERDOWN),
1299 bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
1300 enum dpio_channel ch, bool override)
1302 struct i915_power_domains *power_domains = &dev_priv->power_domains;
1305 mutex_lock(&power_domains->lock);
1307 was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1309 if (override == was_override)
1313 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1315 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1317 I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1319 DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
1320 phy, ch, dev_priv->chv_phy_control);
1322 assert_chv_phy_status(dev_priv);
1325 mutex_unlock(&power_domains->lock);
1327 return was_override;
1330 void chv_phy_powergate_lanes(struct intel_encoder *encoder,
1331 bool override, unsigned int mask)
1333 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
1334 struct i915_power_domains *power_domains = &dev_priv->power_domains;
1335 enum dpio_phy phy = vlv_dport_to_phy(enc_to_dig_port(&encoder->base));
1336 enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
1338 mutex_lock(&power_domains->lock);
1340 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch);
1341 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch);
1344 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1346 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1348 I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1350 DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n",
1351 phy, ch, mask, dev_priv->chv_phy_control);
1353 assert_chv_phy_status(dev_priv);
1355 assert_chv_phy_powergate(dev_priv, phy, ch, override, mask);
1357 mutex_unlock(&power_domains->lock);
1360 static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
1361 struct i915_power_well *power_well)
1363 enum pipe pipe = PIPE_A;
1367 mutex_lock(&dev_priv->pcu_lock);
1369 state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
1371 * We only ever set the power-on and power-gate states, anything
1372 * else is unexpected.
1374 WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
1375 enabled = state == DP_SSS_PWR_ON(pipe);
1378 * A transient state at this point would mean some unexpected party
1379 * is poking at the power controls too.
1381 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
1382 WARN_ON(ctrl << 16 != state);
1384 mutex_unlock(&dev_priv->pcu_lock);
1389 static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
1390 struct i915_power_well *power_well,
1393 enum pipe pipe = PIPE_A;
1397 state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
1399 mutex_lock(&dev_priv->pcu_lock);
1402 ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
1407 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
1408 ctrl &= ~DP_SSC_MASK(pipe);
1409 ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
1410 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
1412 if (wait_for(COND, 100))
1413 DRM_ERROR("timeout setting power well state %08x (%08x)\n",
1415 vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
1420 mutex_unlock(&dev_priv->pcu_lock);
1423 static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
1424 struct i915_power_well *power_well)
1426 WARN_ON_ONCE(power_well->id != CHV_DISP_PW_PIPE_A);
1428 chv_set_pipe_power_well(dev_priv, power_well, true);
1430 vlv_display_power_well_init(dev_priv);
1433 static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
1434 struct i915_power_well *power_well)
1436 WARN_ON_ONCE(power_well->id != CHV_DISP_PW_PIPE_A);
1438 vlv_display_power_well_deinit(dev_priv);
1440 chv_set_pipe_power_well(dev_priv, power_well, false);
1444 __intel_display_power_get_domain(struct drm_i915_private *dev_priv,
1445 enum intel_display_power_domain domain)
1447 struct i915_power_domains *power_domains = &dev_priv->power_domains;
1448 struct i915_power_well *power_well;
1450 for_each_power_domain_well(dev_priv, power_well, BIT_ULL(domain))
1451 intel_power_well_get(dev_priv, power_well);
1453 power_domains->domain_use_count[domain]++;
1457 * intel_display_power_get - grab a power domain reference
1458 * @dev_priv: i915 device instance
1459 * @domain: power domain to reference
1461 * This function grabs a power domain reference for @domain and ensures that the
1462 * power domain and all its parents are powered up. Therefore users should only
1463 * grab a reference to the innermost power domain they need.
1465 * Any power domain reference obtained by this function must have a symmetric
1466 * call to intel_display_power_put() to release the reference again.
1468 void intel_display_power_get(struct drm_i915_private *dev_priv,
1469 enum intel_display_power_domain domain)
1471 struct i915_power_domains *power_domains = &dev_priv->power_domains;
1473 intel_runtime_pm_get(dev_priv);
1475 mutex_lock(&power_domains->lock);
1477 __intel_display_power_get_domain(dev_priv, domain);
1479 mutex_unlock(&power_domains->lock);
1483 * intel_display_power_get_if_enabled - grab a reference for an enabled display power domain
1484 * @dev_priv: i915 device instance
1485 * @domain: power domain to reference
1487 * This function grabs a power domain reference for @domain and ensures that the
1488 * power domain and all its parents are powered up. Therefore users should only
1489 * grab a reference to the innermost power domain they need.
1491 * Any power domain reference obtained by this function must have a symmetric
1492 * call to intel_display_power_put() to release the reference again.
1494 bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
1495 enum intel_display_power_domain domain)
1497 struct i915_power_domains *power_domains = &dev_priv->power_domains;
1500 if (!intel_runtime_pm_get_if_in_use(dev_priv))
1503 mutex_lock(&power_domains->lock);
1505 if (__intel_display_power_is_enabled(dev_priv, domain)) {
1506 __intel_display_power_get_domain(dev_priv, domain);
1512 mutex_unlock(&power_domains->lock);
1515 intel_runtime_pm_put(dev_priv);
1521 * intel_display_power_put - release a power domain reference
1522 * @dev_priv: i915 device instance
1523 * @domain: power domain to reference
1525 * This function drops the power domain reference obtained by
1526 * intel_display_power_get() and might power down the corresponding hardware
1527 * block right away if this is the last reference.
1529 void intel_display_power_put(struct drm_i915_private *dev_priv,
1530 enum intel_display_power_domain domain)
1532 struct i915_power_domains *power_domains;
1533 struct i915_power_well *power_well;
1535 power_domains = &dev_priv->power_domains;
1537 mutex_lock(&power_domains->lock);
1539 WARN(!power_domains->domain_use_count[domain],
1540 "Use count on domain %s is already zero\n",
1541 intel_display_power_domain_str(domain));
1542 power_domains->domain_use_count[domain]--;
1544 for_each_power_domain_well_rev(dev_priv, power_well, BIT_ULL(domain))
1545 intel_power_well_put(dev_priv, power_well);
1547 mutex_unlock(&power_domains->lock);
1549 intel_runtime_pm_put(dev_priv);
1552 #define I830_PIPES_POWER_DOMAINS ( \
1553 BIT_ULL(POWER_DOMAIN_PIPE_A) | \
1554 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1555 BIT_ULL(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
1556 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1557 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1558 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1559 BIT_ULL(POWER_DOMAIN_INIT))
1561 #define VLV_DISPLAY_POWER_DOMAINS ( \
1562 BIT_ULL(POWER_DOMAIN_PIPE_A) | \
1563 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1564 BIT_ULL(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
1565 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1566 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1567 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1568 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1569 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1570 BIT_ULL(POWER_DOMAIN_PORT_DSI) | \
1571 BIT_ULL(POWER_DOMAIN_PORT_CRT) | \
1572 BIT_ULL(POWER_DOMAIN_VGA) | \
1573 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1574 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1575 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1576 BIT_ULL(POWER_DOMAIN_GMBUS) | \
1577 BIT_ULL(POWER_DOMAIN_INIT))
1579 #define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \
1580 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1581 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1582 BIT_ULL(POWER_DOMAIN_PORT_CRT) | \
1583 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1584 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1585 BIT_ULL(POWER_DOMAIN_INIT))
1587 #define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \
1588 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1589 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1590 BIT_ULL(POWER_DOMAIN_INIT))
1592 #define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \
1593 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1594 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1595 BIT_ULL(POWER_DOMAIN_INIT))
1597 #define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \
1598 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1599 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1600 BIT_ULL(POWER_DOMAIN_INIT))
1602 #define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \
1603 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1604 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1605 BIT_ULL(POWER_DOMAIN_INIT))
1607 #define CHV_DISPLAY_POWER_DOMAINS ( \
1608 BIT_ULL(POWER_DOMAIN_PIPE_A) | \
1609 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1610 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1611 BIT_ULL(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
1612 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1613 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1614 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1615 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1616 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1617 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1618 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1619 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
1620 BIT_ULL(POWER_DOMAIN_PORT_DSI) | \
1621 BIT_ULL(POWER_DOMAIN_VGA) | \
1622 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1623 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1624 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1625 BIT_ULL(POWER_DOMAIN_AUX_D) | \
1626 BIT_ULL(POWER_DOMAIN_GMBUS) | \
1627 BIT_ULL(POWER_DOMAIN_INIT))
1629 #define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
1630 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1631 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1632 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1633 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1634 BIT_ULL(POWER_DOMAIN_INIT))
1636 #define CHV_DPIO_CMN_D_POWER_DOMAINS ( \
1637 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
1638 BIT_ULL(POWER_DOMAIN_AUX_D) | \
1639 BIT_ULL(POWER_DOMAIN_INIT))
1641 #define HSW_DISPLAY_POWER_DOMAINS ( \
1642 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1643 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1644 BIT_ULL(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
1645 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1646 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1647 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1648 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1649 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1650 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1651 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1652 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
1653 BIT_ULL(POWER_DOMAIN_PORT_CRT) | /* DDI E */ \
1654 BIT_ULL(POWER_DOMAIN_VGA) | \
1655 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1656 BIT_ULL(POWER_DOMAIN_INIT))
1658 #define BDW_DISPLAY_POWER_DOMAINS ( \
1659 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1660 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1661 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1662 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1663 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1664 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1665 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1666 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1667 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1668 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
1669 BIT_ULL(POWER_DOMAIN_PORT_CRT) | /* DDI E */ \
1670 BIT_ULL(POWER_DOMAIN_VGA) | \
1671 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1672 BIT_ULL(POWER_DOMAIN_INIT))
1674 #define SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
1675 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1676 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1677 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1678 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1679 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1680 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1681 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1682 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1683 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1684 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
1685 BIT_ULL(POWER_DOMAIN_PORT_DDI_E_LANES) | \
1686 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1687 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1688 BIT_ULL(POWER_DOMAIN_AUX_D) | \
1689 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1690 BIT_ULL(POWER_DOMAIN_VGA) | \
1691 BIT_ULL(POWER_DOMAIN_INIT))
1692 #define SKL_DISPLAY_DDI_IO_A_E_POWER_DOMAINS ( \
1693 BIT_ULL(POWER_DOMAIN_PORT_DDI_A_IO) | \
1694 BIT_ULL(POWER_DOMAIN_PORT_DDI_E_IO) | \
1695 BIT_ULL(POWER_DOMAIN_INIT))
1696 #define SKL_DISPLAY_DDI_IO_B_POWER_DOMAINS ( \
1697 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_IO) | \
1698 BIT_ULL(POWER_DOMAIN_INIT))
1699 #define SKL_DISPLAY_DDI_IO_C_POWER_DOMAINS ( \
1700 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_IO) | \
1701 BIT_ULL(POWER_DOMAIN_INIT))
1702 #define SKL_DISPLAY_DDI_IO_D_POWER_DOMAINS ( \
1703 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_IO) | \
1704 BIT_ULL(POWER_DOMAIN_INIT))
1705 #define SKL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
1706 SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
1707 BIT_ULL(POWER_DOMAIN_MODESET) | \
1708 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1709 BIT_ULL(POWER_DOMAIN_INIT))
1711 #define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
1712 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1713 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1714 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1715 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1716 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1717 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1718 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1719 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1720 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1721 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1722 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1723 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1724 BIT_ULL(POWER_DOMAIN_VGA) | \
1725 BIT_ULL(POWER_DOMAIN_GMBUS) | \
1726 BIT_ULL(POWER_DOMAIN_INIT))
1727 #define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \
1728 BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
1729 BIT_ULL(POWER_DOMAIN_MODESET) | \
1730 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1731 BIT_ULL(POWER_DOMAIN_INIT))
1732 #define BXT_DPIO_CMN_A_POWER_DOMAINS ( \
1733 BIT_ULL(POWER_DOMAIN_PORT_DDI_A_LANES) | \
1734 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1735 BIT_ULL(POWER_DOMAIN_INIT))
1736 #define BXT_DPIO_CMN_BC_POWER_DOMAINS ( \
1737 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1738 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1739 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1740 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1741 BIT_ULL(POWER_DOMAIN_INIT))
1743 #define GLK_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
1744 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1745 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1746 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1747 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1748 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1749 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1750 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1751 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1752 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1753 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1754 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1755 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1756 BIT_ULL(POWER_DOMAIN_VGA) | \
1757 BIT_ULL(POWER_DOMAIN_INIT))
1758 #define GLK_DISPLAY_DDI_IO_A_POWER_DOMAINS ( \
1759 BIT_ULL(POWER_DOMAIN_PORT_DDI_A_IO))
1760 #define GLK_DISPLAY_DDI_IO_B_POWER_DOMAINS ( \
1761 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_IO))
1762 #define GLK_DISPLAY_DDI_IO_C_POWER_DOMAINS ( \
1763 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_IO))
1764 #define GLK_DPIO_CMN_A_POWER_DOMAINS ( \
1765 BIT_ULL(POWER_DOMAIN_PORT_DDI_A_LANES) | \
1766 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1767 BIT_ULL(POWER_DOMAIN_INIT))
1768 #define GLK_DPIO_CMN_B_POWER_DOMAINS ( \
1769 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1770 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1771 BIT_ULL(POWER_DOMAIN_INIT))
1772 #define GLK_DPIO_CMN_C_POWER_DOMAINS ( \
1773 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1774 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1775 BIT_ULL(POWER_DOMAIN_INIT))
1776 #define GLK_DISPLAY_AUX_A_POWER_DOMAINS ( \
1777 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1778 BIT_ULL(POWER_DOMAIN_INIT))
1779 #define GLK_DISPLAY_AUX_B_POWER_DOMAINS ( \
1780 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1781 BIT_ULL(POWER_DOMAIN_INIT))
1782 #define GLK_DISPLAY_AUX_C_POWER_DOMAINS ( \
1783 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1784 BIT_ULL(POWER_DOMAIN_INIT))
1785 #define GLK_DISPLAY_DC_OFF_POWER_DOMAINS ( \
1786 GLK_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
1787 BIT_ULL(POWER_DOMAIN_MODESET) | \
1788 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1789 BIT_ULL(POWER_DOMAIN_INIT))
1791 #define CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
1792 BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
1793 BIT_ULL(POWER_DOMAIN_PIPE_B) | \
1794 BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
1795 BIT_ULL(POWER_DOMAIN_PIPE_C) | \
1796 BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
1797 BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
1798 BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
1799 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
1800 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
1801 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
1802 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1803 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1804 BIT_ULL(POWER_DOMAIN_AUX_D) | \
1805 BIT_ULL(POWER_DOMAIN_AUDIO) | \
1806 BIT_ULL(POWER_DOMAIN_VGA) | \
1807 BIT_ULL(POWER_DOMAIN_INIT))
1808 #define CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS ( \
1809 BIT_ULL(POWER_DOMAIN_PORT_DDI_A_IO) | \
1810 BIT_ULL(POWER_DOMAIN_INIT))
1811 #define CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS ( \
1812 BIT_ULL(POWER_DOMAIN_PORT_DDI_B_IO) | \
1813 BIT_ULL(POWER_DOMAIN_INIT))
1814 #define CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS ( \
1815 BIT_ULL(POWER_DOMAIN_PORT_DDI_C_IO) | \
1816 BIT_ULL(POWER_DOMAIN_INIT))
1817 #define CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS ( \
1818 BIT_ULL(POWER_DOMAIN_PORT_DDI_D_IO) | \
1819 BIT_ULL(POWER_DOMAIN_INIT))
1820 #define CNL_DISPLAY_AUX_A_POWER_DOMAINS ( \
1821 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1822 BIT_ULL(POWER_DOMAIN_INIT))
1823 #define CNL_DISPLAY_AUX_B_POWER_DOMAINS ( \
1824 BIT_ULL(POWER_DOMAIN_AUX_B) | \
1825 BIT_ULL(POWER_DOMAIN_INIT))
1826 #define CNL_DISPLAY_AUX_C_POWER_DOMAINS ( \
1827 BIT_ULL(POWER_DOMAIN_AUX_C) | \
1828 BIT_ULL(POWER_DOMAIN_INIT))
1829 #define CNL_DISPLAY_AUX_D_POWER_DOMAINS ( \
1830 BIT_ULL(POWER_DOMAIN_AUX_D) | \
1831 BIT_ULL(POWER_DOMAIN_INIT))
1832 #define CNL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
1833 CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
1834 BIT_ULL(POWER_DOMAIN_MODESET) | \
1835 BIT_ULL(POWER_DOMAIN_AUX_A) | \
1836 BIT_ULL(POWER_DOMAIN_INIT))
1838 static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
1839 .sync_hw = i9xx_power_well_sync_hw_noop,
1840 .enable = i9xx_always_on_power_well_noop,
1841 .disable = i9xx_always_on_power_well_noop,
1842 .is_enabled = i9xx_always_on_power_well_enabled,
1845 static const struct i915_power_well_ops chv_pipe_power_well_ops = {
1846 .sync_hw = i9xx_power_well_sync_hw_noop,
1847 .enable = chv_pipe_power_well_enable,
1848 .disable = chv_pipe_power_well_disable,
1849 .is_enabled = chv_pipe_power_well_enabled,
1852 static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
1853 .sync_hw = i9xx_power_well_sync_hw_noop,
1854 .enable = chv_dpio_cmn_power_well_enable,
1855 .disable = chv_dpio_cmn_power_well_disable,
1856 .is_enabled = vlv_power_well_enabled,
1859 static struct i915_power_well i9xx_always_on_power_well[] = {
1861 .name = "always-on",
1863 .domains = POWER_DOMAIN_MASK,
1864 .ops = &i9xx_always_on_power_well_ops,
1865 .id = I915_DISP_PW_ALWAYS_ON,
1869 static const struct i915_power_well_ops i830_pipes_power_well_ops = {
1870 .sync_hw = i830_pipes_power_well_sync_hw,
1871 .enable = i830_pipes_power_well_enable,
1872 .disable = i830_pipes_power_well_disable,
1873 .is_enabled = i830_pipes_power_well_enabled,
1876 static struct i915_power_well i830_power_wells[] = {
1878 .name = "always-on",
1880 .domains = POWER_DOMAIN_MASK,
1881 .ops = &i9xx_always_on_power_well_ops,
1882 .id = I915_DISP_PW_ALWAYS_ON,
1886 .domains = I830_PIPES_POWER_DOMAINS,
1887 .ops = &i830_pipes_power_well_ops,
1888 .id = I830_DISP_PW_PIPES,
1892 static const struct i915_power_well_ops hsw_power_well_ops = {
1893 .sync_hw = hsw_power_well_sync_hw,
1894 .enable = hsw_power_well_enable,
1895 .disable = hsw_power_well_disable,
1896 .is_enabled = hsw_power_well_enabled,
1899 static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
1900 .sync_hw = i9xx_power_well_sync_hw_noop,
1901 .enable = gen9_dc_off_power_well_enable,
1902 .disable = gen9_dc_off_power_well_disable,
1903 .is_enabled = gen9_dc_off_power_well_enabled,
1906 static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
1907 .sync_hw = i9xx_power_well_sync_hw_noop,
1908 .enable = bxt_dpio_cmn_power_well_enable,
1909 .disable = bxt_dpio_cmn_power_well_disable,
1910 .is_enabled = bxt_dpio_cmn_power_well_enabled,
1913 static struct i915_power_well hsw_power_wells[] = {
1915 .name = "always-on",
1917 .domains = POWER_DOMAIN_MASK,
1918 .ops = &i9xx_always_on_power_well_ops,
1919 .id = I915_DISP_PW_ALWAYS_ON,
1923 .domains = HSW_DISPLAY_POWER_DOMAINS,
1924 .ops = &hsw_power_well_ops,
1925 .id = HSW_DISP_PW_GLOBAL,
1927 .hsw.has_vga = true,
1932 static struct i915_power_well bdw_power_wells[] = {
1934 .name = "always-on",
1936 .domains = POWER_DOMAIN_MASK,
1937 .ops = &i9xx_always_on_power_well_ops,
1938 .id = I915_DISP_PW_ALWAYS_ON,
1942 .domains = BDW_DISPLAY_POWER_DOMAINS,
1943 .ops = &hsw_power_well_ops,
1944 .id = HSW_DISP_PW_GLOBAL,
1946 .hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
1947 .hsw.has_vga = true,
1952 static const struct i915_power_well_ops vlv_display_power_well_ops = {
1953 .sync_hw = i9xx_power_well_sync_hw_noop,
1954 .enable = vlv_display_power_well_enable,
1955 .disable = vlv_display_power_well_disable,
1956 .is_enabled = vlv_power_well_enabled,
1959 static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
1960 .sync_hw = i9xx_power_well_sync_hw_noop,
1961 .enable = vlv_dpio_cmn_power_well_enable,
1962 .disable = vlv_dpio_cmn_power_well_disable,
1963 .is_enabled = vlv_power_well_enabled,
1966 static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
1967 .sync_hw = i9xx_power_well_sync_hw_noop,
1968 .enable = vlv_power_well_enable,
1969 .disable = vlv_power_well_disable,
1970 .is_enabled = vlv_power_well_enabled,
1973 static struct i915_power_well vlv_power_wells[] = {
1975 .name = "always-on",
1977 .domains = POWER_DOMAIN_MASK,
1978 .ops = &i9xx_always_on_power_well_ops,
1979 .id = I915_DISP_PW_ALWAYS_ON,
1983 .domains = VLV_DISPLAY_POWER_DOMAINS,
1984 .id = PUNIT_POWER_WELL_DISP2D,
1985 .ops = &vlv_display_power_well_ops,
1988 .name = "dpio-tx-b-01",
1989 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
1990 VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
1991 VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
1992 VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
1993 .ops = &vlv_dpio_power_well_ops,
1994 .id = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
1997 .name = "dpio-tx-b-23",
1998 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
1999 VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
2000 VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
2001 VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
2002 .ops = &vlv_dpio_power_well_ops,
2003 .id = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
2006 .name = "dpio-tx-c-01",
2007 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
2008 VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
2009 VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
2010 VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
2011 .ops = &vlv_dpio_power_well_ops,
2012 .id = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
2015 .name = "dpio-tx-c-23",
2016 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
2017 VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
2018 VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
2019 VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
2020 .ops = &vlv_dpio_power_well_ops,
2021 .id = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
2024 .name = "dpio-common",
2025 .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
2026 .id = PUNIT_POWER_WELL_DPIO_CMN_BC,
2027 .ops = &vlv_dpio_cmn_power_well_ops,
2031 static struct i915_power_well chv_power_wells[] = {
2033 .name = "always-on",
2035 .domains = POWER_DOMAIN_MASK,
2036 .ops = &i9xx_always_on_power_well_ops,
2037 .id = I915_DISP_PW_ALWAYS_ON,
2042 * Pipe A power well is the new disp2d well. Pipe B and C
2043 * power wells don't actually exist. Pipe A power well is
2044 * required for any pipe to work.
2046 .domains = CHV_DISPLAY_POWER_DOMAINS,
2047 .id = CHV_DISP_PW_PIPE_A,
2048 .ops = &chv_pipe_power_well_ops,
2051 .name = "dpio-common-bc",
2052 .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS,
2053 .id = PUNIT_POWER_WELL_DPIO_CMN_BC,
2054 .ops = &chv_dpio_cmn_power_well_ops,
2057 .name = "dpio-common-d",
2058 .domains = CHV_DPIO_CMN_D_POWER_DOMAINS,
2059 .id = PUNIT_POWER_WELL_DPIO_CMN_D,
2060 .ops = &chv_dpio_cmn_power_well_ops,
2064 bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
2065 enum i915_power_well_id power_well_id)
2067 struct i915_power_well *power_well;
2070 power_well = lookup_power_well(dev_priv, power_well_id);
2071 ret = power_well->ops->is_enabled(dev_priv, power_well);
2076 static struct i915_power_well skl_power_wells[] = {
2078 .name = "always-on",
2080 .domains = POWER_DOMAIN_MASK,
2081 .ops = &i9xx_always_on_power_well_ops,
2082 .id = I915_DISP_PW_ALWAYS_ON,
2085 .name = "power well 1",
2086 /* Handled by the DMC firmware */
2088 .ops = &hsw_power_well_ops,
2089 .id = SKL_DISP_PW_1,
2091 .hsw.has_fuses = true,
2095 .name = "MISC IO power well",
2096 /* Handled by the DMC firmware */
2098 .ops = &hsw_power_well_ops,
2099 .id = SKL_DISP_PW_MISC_IO,
2103 .domains = SKL_DISPLAY_DC_OFF_POWER_DOMAINS,
2104 .ops = &gen9_dc_off_power_well_ops,
2105 .id = SKL_DISP_PW_DC_OFF,
2108 .name = "power well 2",
2109 .domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
2110 .ops = &hsw_power_well_ops,
2111 .id = SKL_DISP_PW_2,
2113 .hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
2114 .hsw.has_vga = true,
2115 .hsw.has_fuses = true,
2119 .name = "DDI A/E IO power well",
2120 .domains = SKL_DISPLAY_DDI_IO_A_E_POWER_DOMAINS,
2121 .ops = &hsw_power_well_ops,
2122 .id = SKL_DISP_PW_DDI_A_E,
2125 .name = "DDI B IO power well",
2126 .domains = SKL_DISPLAY_DDI_IO_B_POWER_DOMAINS,
2127 .ops = &hsw_power_well_ops,
2128 .id = SKL_DISP_PW_DDI_B,
2131 .name = "DDI C IO power well",
2132 .domains = SKL_DISPLAY_DDI_IO_C_POWER_DOMAINS,
2133 .ops = &hsw_power_well_ops,
2134 .id = SKL_DISP_PW_DDI_C,
2137 .name = "DDI D IO power well",
2138 .domains = SKL_DISPLAY_DDI_IO_D_POWER_DOMAINS,
2139 .ops = &hsw_power_well_ops,
2140 .id = SKL_DISP_PW_DDI_D,
2144 static struct i915_power_well bxt_power_wells[] = {
2146 .name = "always-on",
2148 .domains = POWER_DOMAIN_MASK,
2149 .ops = &i9xx_always_on_power_well_ops,
2150 .id = I915_DISP_PW_ALWAYS_ON,
2153 .name = "power well 1",
2155 .ops = &hsw_power_well_ops,
2156 .id = SKL_DISP_PW_1,
2158 .hsw.has_fuses = true,
2163 .domains = BXT_DISPLAY_DC_OFF_POWER_DOMAINS,
2164 .ops = &gen9_dc_off_power_well_ops,
2165 .id = SKL_DISP_PW_DC_OFF,
2168 .name = "power well 2",
2169 .domains = BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS,
2170 .ops = &hsw_power_well_ops,
2171 .id = SKL_DISP_PW_2,
2173 .hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
2174 .hsw.has_vga = true,
2175 .hsw.has_fuses = true,
2179 .name = "dpio-common-a",
2180 .domains = BXT_DPIO_CMN_A_POWER_DOMAINS,
2181 .ops = &bxt_dpio_cmn_power_well_ops,
2182 .id = BXT_DPIO_CMN_A,
2184 .bxt.phy = DPIO_PHY1,
2188 .name = "dpio-common-bc",
2189 .domains = BXT_DPIO_CMN_BC_POWER_DOMAINS,
2190 .ops = &bxt_dpio_cmn_power_well_ops,
2191 .id = BXT_DPIO_CMN_BC,
2193 .bxt.phy = DPIO_PHY0,
2198 static struct i915_power_well glk_power_wells[] = {
2200 .name = "always-on",
2202 .domains = POWER_DOMAIN_MASK,
2203 .ops = &i9xx_always_on_power_well_ops,
2204 .id = I915_DISP_PW_ALWAYS_ON,
2207 .name = "power well 1",
2208 /* Handled by the DMC firmware */
2210 .ops = &hsw_power_well_ops,
2211 .id = SKL_DISP_PW_1,
2213 .hsw.has_fuses = true,
2218 .domains = GLK_DISPLAY_DC_OFF_POWER_DOMAINS,
2219 .ops = &gen9_dc_off_power_well_ops,
2220 .id = SKL_DISP_PW_DC_OFF,
2223 .name = "power well 2",
2224 .domains = GLK_DISPLAY_POWERWELL_2_POWER_DOMAINS,
2225 .ops = &hsw_power_well_ops,
2226 .id = SKL_DISP_PW_2,
2228 .hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
2229 .hsw.has_vga = true,
2230 .hsw.has_fuses = true,
2234 .name = "dpio-common-a",
2235 .domains = GLK_DPIO_CMN_A_POWER_DOMAINS,
2236 .ops = &bxt_dpio_cmn_power_well_ops,
2237 .id = BXT_DPIO_CMN_A,
2239 .bxt.phy = DPIO_PHY1,
2243 .name = "dpio-common-b",
2244 .domains = GLK_DPIO_CMN_B_POWER_DOMAINS,
2245 .ops = &bxt_dpio_cmn_power_well_ops,
2246 .id = BXT_DPIO_CMN_BC,
2248 .bxt.phy = DPIO_PHY0,
2252 .name = "dpio-common-c",
2253 .domains = GLK_DPIO_CMN_C_POWER_DOMAINS,
2254 .ops = &bxt_dpio_cmn_power_well_ops,
2255 .id = GLK_DPIO_CMN_C,
2257 .bxt.phy = DPIO_PHY2,
2262 .domains = GLK_DISPLAY_AUX_A_POWER_DOMAINS,
2263 .ops = &hsw_power_well_ops,
2264 .id = GLK_DISP_PW_AUX_A,
2268 .domains = GLK_DISPLAY_AUX_B_POWER_DOMAINS,
2269 .ops = &hsw_power_well_ops,
2270 .id = GLK_DISP_PW_AUX_B,
2274 .domains = GLK_DISPLAY_AUX_C_POWER_DOMAINS,
2275 .ops = &hsw_power_well_ops,
2276 .id = GLK_DISP_PW_AUX_C,
2279 .name = "DDI A IO power well",
2280 .domains = GLK_DISPLAY_DDI_IO_A_POWER_DOMAINS,
2281 .ops = &hsw_power_well_ops,
2282 .id = GLK_DISP_PW_DDI_A,
2285 .name = "DDI B IO power well",
2286 .domains = GLK_DISPLAY_DDI_IO_B_POWER_DOMAINS,
2287 .ops = &hsw_power_well_ops,
2288 .id = SKL_DISP_PW_DDI_B,
2291 .name = "DDI C IO power well",
2292 .domains = GLK_DISPLAY_DDI_IO_C_POWER_DOMAINS,
2293 .ops = &hsw_power_well_ops,
2294 .id = SKL_DISP_PW_DDI_C,
2298 static struct i915_power_well cnl_power_wells[] = {
2300 .name = "always-on",
2302 .domains = POWER_DOMAIN_MASK,
2303 .ops = &i9xx_always_on_power_well_ops,
2304 .id = I915_DISP_PW_ALWAYS_ON,
2307 .name = "power well 1",
2308 /* Handled by the DMC firmware */
2310 .ops = &hsw_power_well_ops,
2311 .id = SKL_DISP_PW_1,
2313 .hsw.has_fuses = true,
2318 .domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,
2319 .ops = &hsw_power_well_ops,
2320 .id = CNL_DISP_PW_AUX_A,
2324 .domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,
2325 .ops = &hsw_power_well_ops,
2326 .id = CNL_DISP_PW_AUX_B,
2330 .domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,
2331 .ops = &hsw_power_well_ops,
2332 .id = CNL_DISP_PW_AUX_C,
2336 .domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,
2337 .ops = &hsw_power_well_ops,
2338 .id = CNL_DISP_PW_AUX_D,
2342 .domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,
2343 .ops = &gen9_dc_off_power_well_ops,
2344 .id = SKL_DISP_PW_DC_OFF,
2347 .name = "power well 2",
2348 .domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
2349 .ops = &hsw_power_well_ops,
2350 .id = SKL_DISP_PW_2,
2352 .hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
2353 .hsw.has_vga = true,
2354 .hsw.has_fuses = true,
2358 .name = "DDI A IO power well",
2359 .domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,
2360 .ops = &hsw_power_well_ops,
2361 .id = CNL_DISP_PW_DDI_A,
2364 .name = "DDI B IO power well",
2365 .domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,
2366 .ops = &hsw_power_well_ops,
2367 .id = SKL_DISP_PW_DDI_B,
2370 .name = "DDI C IO power well",
2371 .domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,
2372 .ops = &hsw_power_well_ops,
2373 .id = SKL_DISP_PW_DDI_C,
2376 .name = "DDI D IO power well",
2377 .domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,
2378 .ops = &hsw_power_well_ops,
2379 .id = SKL_DISP_PW_DDI_D,
2384 sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
2385 int disable_power_well)
2387 if (disable_power_well >= 0)
2388 return !!disable_power_well;
2393 static uint32_t get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
2400 if (IS_GEN9_BC(dev_priv) || IS_CANNONLAKE(dev_priv)) {
2403 } else if (IS_GEN9_LP(dev_priv)) {
2406 * DC9 has a separate HW flow from the rest of the DC states,
2407 * not depending on the DMC firmware. It's needed by system
2408 * suspend/resume, so allow it unconditionally.
2410 mask = DC_STATE_EN_DC9;
2416 if (!i915_modparams.disable_power_well)
2419 if (enable_dc >= 0 && enable_dc <= max_dc) {
2420 requested_dc = enable_dc;
2421 } else if (enable_dc == -1) {
2422 requested_dc = max_dc;
2423 } else if (enable_dc > max_dc && enable_dc <= 2) {
2424 DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n",
2426 requested_dc = max_dc;
2428 DRM_ERROR("Unexpected value for enable_dc (%d)\n", enable_dc);
2429 requested_dc = max_dc;
2432 if (requested_dc > 1)
2433 mask |= DC_STATE_EN_UPTO_DC6;
2434 if (requested_dc > 0)
2435 mask |= DC_STATE_EN_UPTO_DC5;
2437 DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask);
2442 static void assert_power_well_ids_unique(struct drm_i915_private *dev_priv)
2444 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2449 for (i = 0; i < power_domains->power_well_count; i++) {
2450 enum i915_power_well_id id = power_domains->power_wells[i].id;
2452 WARN_ON(id >= sizeof(power_well_ids) * 8);
2453 WARN_ON(power_well_ids & BIT_ULL(id));
2454 power_well_ids |= BIT_ULL(id);
2458 #define set_power_wells(power_domains, __power_wells) ({ \
2459 (power_domains)->power_wells = (__power_wells); \
2460 (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \
2464 * intel_power_domains_init - initializes the power domain structures
2465 * @dev_priv: i915 device instance
2467 * Initializes the power domain structures for @dev_priv depending upon the
2468 * supported platform.
2470 int intel_power_domains_init(struct drm_i915_private *dev_priv)
2472 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2474 i915_modparams.disable_power_well =
2475 sanitize_disable_power_well_option(dev_priv,
2476 i915_modparams.disable_power_well);
2477 dev_priv->csr.allowed_dc_mask =
2478 get_allowed_dc_mask(dev_priv, i915_modparams.enable_dc);
2480 BUILD_BUG_ON(POWER_DOMAIN_NUM > 64);
2482 mutex_init(&power_domains->lock);
2485 * The enabling order will be from lower to higher indexed wells,
2486 * the disabling order is reversed.
2488 if (IS_HASWELL(dev_priv)) {
2489 set_power_wells(power_domains, hsw_power_wells);
2490 } else if (IS_BROADWELL(dev_priv)) {
2491 set_power_wells(power_domains, bdw_power_wells);
2492 } else if (IS_GEN9_BC(dev_priv)) {
2493 set_power_wells(power_domains, skl_power_wells);
2494 } else if (IS_CANNONLAKE(dev_priv)) {
2495 set_power_wells(power_domains, cnl_power_wells);
2496 } else if (IS_BROXTON(dev_priv)) {
2497 set_power_wells(power_domains, bxt_power_wells);
2498 } else if (IS_GEMINILAKE(dev_priv)) {
2499 set_power_wells(power_domains, glk_power_wells);
2500 } else if (IS_CHERRYVIEW(dev_priv)) {
2501 set_power_wells(power_domains, chv_power_wells);
2502 } else if (IS_VALLEYVIEW(dev_priv)) {
2503 set_power_wells(power_domains, vlv_power_wells);
2504 } else if (IS_I830(dev_priv)) {
2505 set_power_wells(power_domains, i830_power_wells);
2507 set_power_wells(power_domains, i9xx_always_on_power_well);
2510 assert_power_well_ids_unique(dev_priv);
2516 * intel_power_domains_fini - finalizes the power domain structures
2517 * @dev_priv: i915 device instance
2519 * Finalizes the power domain structures for @dev_priv depending upon the
2520 * supported platform. This function also disables runtime pm and ensures that
2521 * the device stays powered up so that the driver can be reloaded.
2523 void intel_power_domains_fini(struct drm_i915_private *dev_priv)
2525 struct device *kdev = &dev_priv->drm.pdev->dev;
2528 * The i915.ko module is still not prepared to be loaded when
2529 * the power well is not enabled, so just enable it in case
2530 * we're going to unload/reload.
2531 * The following also reacquires the RPM reference the core passed
2532 * to the driver during loading, which is dropped in
2533 * intel_runtime_pm_enable(). We have to hand back the control of the
2534 * device to the core with this reference held.
2536 intel_display_set_init_power(dev_priv, true);
2538 /* Remove the refcount we took to keep power well support disabled. */
2539 if (!i915_modparams.disable_power_well)
2540 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
2543 * Remove the refcount we took in intel_runtime_pm_enable() in case
2544 * the platform doesn't support runtime PM.
2546 if (!HAS_RUNTIME_PM(dev_priv))
2547 pm_runtime_put(kdev);
2550 static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
2552 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2553 struct i915_power_well *power_well;
2555 mutex_lock(&power_domains->lock);
2556 for_each_power_well(dev_priv, power_well) {
2557 power_well->ops->sync_hw(dev_priv, power_well);
2558 power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
2561 mutex_unlock(&power_domains->lock);
2564 static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
2566 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
2567 POSTING_READ(DBUF_CTL);
2571 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
2572 DRM_ERROR("DBuf power enable timeout\n");
2575 static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
2577 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
2578 POSTING_READ(DBUF_CTL);
2582 if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
2583 DRM_ERROR("DBuf power disable timeout!\n");
2586 static void skl_display_core_init(struct drm_i915_private *dev_priv,
2589 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2590 struct i915_power_well *well;
2593 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2595 /* enable PCH reset handshake */
2596 val = I915_READ(HSW_NDE_RSTWRN_OPT);
2597 I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
2599 /* enable PG1 and Misc I/O */
2600 mutex_lock(&power_domains->lock);
2602 well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
2603 intel_power_well_enable(dev_priv, well);
2605 well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
2606 intel_power_well_enable(dev_priv, well);
2608 mutex_unlock(&power_domains->lock);
2610 skl_init_cdclk(dev_priv);
2612 gen9_dbuf_enable(dev_priv);
2614 if (resume && dev_priv->csr.dmc_payload)
2615 intel_csr_load_program(dev_priv);
2618 static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
2620 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2621 struct i915_power_well *well;
2623 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2625 gen9_dbuf_disable(dev_priv);
2627 skl_uninit_cdclk(dev_priv);
2629 /* The spec doesn't call for removing the reset handshake flag */
2630 /* disable PG1 and Misc I/O */
2632 mutex_lock(&power_domains->lock);
2635 * BSpec says to keep the MISC IO power well enabled here, only
2636 * remove our request for power well 1.
2637 * Note that even though the driver's request is removed power well 1
2638 * may stay enabled after this due to DMC's own request on it.
2640 well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
2641 intel_power_well_disable(dev_priv, well);
2643 mutex_unlock(&power_domains->lock);
2645 usleep_range(10, 30); /* 10 us delay per Bspec */
2648 void bxt_display_core_init(struct drm_i915_private *dev_priv,
2651 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2652 struct i915_power_well *well;
2655 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2658 * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
2659 * or else the reset will hang because there is no PCH to respond.
2660 * Move the handshake programming to initialization sequence.
2661 * Previously was left up to BIOS.
2663 val = I915_READ(HSW_NDE_RSTWRN_OPT);
2664 val &= ~RESET_PCH_HANDSHAKE_ENABLE;
2665 I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
2668 mutex_lock(&power_domains->lock);
2670 well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
2671 intel_power_well_enable(dev_priv, well);
2673 mutex_unlock(&power_domains->lock);
2675 bxt_init_cdclk(dev_priv);
2677 gen9_dbuf_enable(dev_priv);
2679 if (resume && dev_priv->csr.dmc_payload)
2680 intel_csr_load_program(dev_priv);
2683 void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
2685 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2686 struct i915_power_well *well;
2688 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2690 gen9_dbuf_disable(dev_priv);
2692 bxt_uninit_cdclk(dev_priv);
2694 /* The spec doesn't call for removing the reset handshake flag */
2697 * Disable PW1 (PG1).
2698 * Note that even though the driver's request is removed power well 1
2699 * may stay enabled after this due to DMC's own request on it.
2701 mutex_lock(&power_domains->lock);
2703 well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
2704 intel_power_well_disable(dev_priv, well);
2706 mutex_unlock(&power_domains->lock);
2708 usleep_range(10, 30); /* 10 us delay per Bspec */
2712 PROCMON_0_85V_DOT_0,
2713 PROCMON_0_95V_DOT_0,
2714 PROCMON_0_95V_DOT_1,
2715 PROCMON_1_05V_DOT_0,
2716 PROCMON_1_05V_DOT_1,
2719 static const struct cnl_procmon {
2721 } cnl_procmon_values[] = {
2722 [PROCMON_0_85V_DOT_0] =
2723 { .dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
2724 [PROCMON_0_95V_DOT_0] =
2725 { .dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
2726 [PROCMON_0_95V_DOT_1] =
2727 { .dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
2728 [PROCMON_1_05V_DOT_0] =
2729 { .dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
2730 [PROCMON_1_05V_DOT_1] =
2731 { .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
2734 static void cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv)
2736 const struct cnl_procmon *procmon;
2739 val = I915_READ(CNL_PORT_COMP_DW3);
2740 switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
2743 case VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0:
2744 procmon = &cnl_procmon_values[PROCMON_0_85V_DOT_0];
2746 case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0:
2747 procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_0];
2749 case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1:
2750 procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_1];
2752 case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0:
2753 procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_0];
2755 case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1:
2756 procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_1];
2760 val = I915_READ(CNL_PORT_COMP_DW1);
2761 val &= ~((0xff << 16) | 0xff);
2762 val |= procmon->dw1;
2763 I915_WRITE(CNL_PORT_COMP_DW1, val);
2765 I915_WRITE(CNL_PORT_COMP_DW9, procmon->dw9);
2766 I915_WRITE(CNL_PORT_COMP_DW10, procmon->dw10);
2769 static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume)
2771 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2772 struct i915_power_well *well;
2775 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2777 /* 1. Enable PCH Reset Handshake */
2778 val = I915_READ(HSW_NDE_RSTWRN_OPT);
2779 val |= RESET_PCH_HANDSHAKE_ENABLE;
2780 I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
2782 /* 2. Enable Comp */
2783 val = I915_READ(CHICKEN_MISC_2);
2784 val &= ~CNL_COMP_PWR_DOWN;
2785 I915_WRITE(CHICKEN_MISC_2, val);
2787 cnl_set_procmon_ref_values(dev_priv);
2789 val = I915_READ(CNL_PORT_COMP_DW0);
2791 I915_WRITE(CNL_PORT_COMP_DW0, val);
2794 val = I915_READ(CNL_PORT_CL1CM_DW5);
2795 val |= CL_POWER_DOWN_ENABLE;
2796 I915_WRITE(CNL_PORT_CL1CM_DW5, val);
2799 * 4. Enable Power Well 1 (PG1).
2800 * The AUX IO power wells will be enabled on demand.
2802 mutex_lock(&power_domains->lock);
2803 well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
2804 intel_power_well_enable(dev_priv, well);
2805 mutex_unlock(&power_domains->lock);
2807 /* 5. Enable CD clock */
2808 cnl_init_cdclk(dev_priv);
2810 /* 6. Enable DBUF */
2811 gen9_dbuf_enable(dev_priv);
2813 if (resume && dev_priv->csr.dmc_payload)
2814 intel_csr_load_program(dev_priv);
2817 static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
2819 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2820 struct i915_power_well *well;
2823 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2825 /* 1. Disable all display engine functions -> aready done */
2827 /* 2. Disable DBUF */
2828 gen9_dbuf_disable(dev_priv);
2830 /* 3. Disable CD clock */
2831 cnl_uninit_cdclk(dev_priv);
2834 * 4. Disable Power Well 1 (PG1).
2835 * The AUX IO power wells are toggled on demand, so they are already
2836 * disabled at this point.
2838 mutex_lock(&power_domains->lock);
2839 well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
2840 intel_power_well_disable(dev_priv, well);
2841 mutex_unlock(&power_domains->lock);
2843 usleep_range(10, 30); /* 10 us delay per Bspec */
2845 /* 5. Disable Comp */
2846 val = I915_READ(CHICKEN_MISC_2);
2847 val |= CNL_COMP_PWR_DOWN;
2848 I915_WRITE(CHICKEN_MISC_2, val);
2851 static void chv_phy_control_init(struct drm_i915_private *dev_priv)
2853 struct i915_power_well *cmn_bc =
2854 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
2855 struct i915_power_well *cmn_d =
2856 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
2859 * DISPLAY_PHY_CONTROL can get corrupted if read. As a
2860 * workaround never ever read DISPLAY_PHY_CONTROL, and
2861 * instead maintain a shadow copy ourselves. Use the actual
2862 * power well state and lane status to reconstruct the
2863 * expected initial value.
2865 dev_priv->chv_phy_control =
2866 PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) |
2867 PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) |
2868 PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) |
2869 PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) |
2870 PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0);
2873 * If all lanes are disabled we leave the override disabled
2874 * with all power down bits cleared to match the state we
2875 * would use after disabling the port. Otherwise enable the
2876 * override and set the lane powerdown bits accding to the
2877 * current lane status.
2879 if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
2880 uint32_t status = I915_READ(DPLL(PIPE_A));
2883 mask = status & DPLL_PORTB_READY_MASK;
2887 dev_priv->chv_phy_control |=
2888 PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0);
2890 dev_priv->chv_phy_control |=
2891 PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0);
2893 mask = (status & DPLL_PORTC_READY_MASK) >> 4;
2897 dev_priv->chv_phy_control |=
2898 PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1);
2900 dev_priv->chv_phy_control |=
2901 PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1);
2903 dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0);
2905 dev_priv->chv_phy_assert[DPIO_PHY0] = false;
2907 dev_priv->chv_phy_assert[DPIO_PHY0] = true;
2910 if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
2911 uint32_t status = I915_READ(DPIO_PHY_STATUS);
2914 mask = status & DPLL_PORTD_READY_MASK;
2919 dev_priv->chv_phy_control |=
2920 PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0);
2922 dev_priv->chv_phy_control |=
2923 PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0);
2925 dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1);
2927 dev_priv->chv_phy_assert[DPIO_PHY1] = false;
2929 dev_priv->chv_phy_assert[DPIO_PHY1] = true;
2932 I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
2934 DRM_DEBUG_KMS("Initial PHY_CONTROL=0x%08x\n",
2935 dev_priv->chv_phy_control);
2938 static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
2940 struct i915_power_well *cmn =
2941 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
2942 struct i915_power_well *disp2d =
2943 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
2945 /* If the display might be already active skip this */
2946 if (cmn->ops->is_enabled(dev_priv, cmn) &&
2947 disp2d->ops->is_enabled(dev_priv, disp2d) &&
2948 I915_READ(DPIO_CTL) & DPIO_CMNRST)
2951 DRM_DEBUG_KMS("toggling display PHY side reset\n");
2953 /* cmnlane needs DPLL registers */
2954 disp2d->ops->enable(dev_priv, disp2d);
2957 * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
2958 * Need to assert and de-assert PHY SB reset by gating the
2959 * common lane power, then un-gating it.
2960 * Simply ungating isn't enough to reset the PHY enough to get
2961 * ports and lanes running.
2963 cmn->ops->disable(dev_priv, cmn);
2967 * intel_power_domains_init_hw - initialize hardware power domain state
2968 * @dev_priv: i915 device instance
2969 * @resume: Called from resume code paths or not
2971 * This function initializes the hardware power domain state and enables all
2972 * power wells belonging to the INIT power domain. Power wells in other
2973 * domains (and not in the INIT domain) are referenced or disabled during the
2974 * modeset state HW readout. After that the reference count of each power well
2975 * must match its HW enabled state, see intel_power_domains_verify_state().
2977 void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
2979 struct i915_power_domains *power_domains = &dev_priv->power_domains;
2981 power_domains->initializing = true;
2983 if (IS_CANNONLAKE(dev_priv)) {
2984 cnl_display_core_init(dev_priv, resume);
2985 } else if (IS_GEN9_BC(dev_priv)) {
2986 skl_display_core_init(dev_priv, resume);
2987 } else if (IS_GEN9_LP(dev_priv)) {
2988 bxt_display_core_init(dev_priv, resume);
2989 } else if (IS_CHERRYVIEW(dev_priv)) {
2990 mutex_lock(&power_domains->lock);
2991 chv_phy_control_init(dev_priv);
2992 mutex_unlock(&power_domains->lock);
2993 } else if (IS_VALLEYVIEW(dev_priv)) {
2994 mutex_lock(&power_domains->lock);
2995 vlv_cmnlane_wa(dev_priv);
2996 mutex_unlock(&power_domains->lock);
2999 /* For now, we need the power well to be always enabled. */
3000 intel_display_set_init_power(dev_priv, true);
3001 /* Disable power support if the user asked so. */
3002 if (!i915_modparams.disable_power_well)
3003 intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
3004 intel_power_domains_sync_hw(dev_priv);
3005 power_domains->initializing = false;
3009 * intel_power_domains_suspend - suspend power domain state
3010 * @dev_priv: i915 device instance
3012 * This function prepares the hardware power domain state before entering
3013 * system suspend. It must be paired with intel_power_domains_init_hw().
3015 void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
3018 * Even if power well support was disabled we still want to disable
3019 * power wells while we are system suspended.
3021 if (!i915_modparams.disable_power_well)
3022 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
3024 if (IS_CANNONLAKE(dev_priv))
3025 cnl_display_core_uninit(dev_priv);
3026 else if (IS_GEN9_BC(dev_priv))
3027 skl_display_core_uninit(dev_priv);
3028 else if (IS_GEN9_LP(dev_priv))
3029 bxt_display_core_uninit(dev_priv);
3032 static void intel_power_domains_dump_info(struct drm_i915_private *dev_priv)
3034 struct i915_power_domains *power_domains = &dev_priv->power_domains;
3035 struct i915_power_well *power_well;
3037 for_each_power_well(dev_priv, power_well) {
3038 enum intel_display_power_domain domain;
3040 DRM_DEBUG_DRIVER("%-25s %d\n",
3041 power_well->name, power_well->count);
3043 for_each_power_domain(domain, power_well->domains)
3044 DRM_DEBUG_DRIVER(" %-23s %d\n",
3045 intel_display_power_domain_str(domain),
3046 power_domains->domain_use_count[domain]);
3051 * intel_power_domains_verify_state - verify the HW/SW state for all power wells
3052 * @dev_priv: i915 device instance
3054 * Verify if the reference count of each power well matches its HW enabled
3055 * state and the total refcount of the domains it belongs to. This must be
3056 * called after modeset HW state sanitization, which is responsible for
3057 * acquiring reference counts for any power wells in use and disabling the
3058 * ones left on by BIOS but not required by any active output.
3060 void intel_power_domains_verify_state(struct drm_i915_private *dev_priv)
3062 struct i915_power_domains *power_domains = &dev_priv->power_domains;
3063 struct i915_power_well *power_well;
3064 bool dump_domain_info;
3066 mutex_lock(&power_domains->lock);
3068 dump_domain_info = false;
3069 for_each_power_well(dev_priv, power_well) {
3070 enum intel_display_power_domain domain;
3075 * Power wells not belonging to any domain (like the MISC_IO
3076 * and PW1 power wells) are under FW control, so ignore them,
3077 * since their state can change asynchronously.
3079 if (!power_well->domains)
3082 enabled = power_well->ops->is_enabled(dev_priv, power_well);
3083 if ((power_well->count || power_well->always_on) != enabled)
3084 DRM_ERROR("power well %s state mismatch (refcount %d/enabled %d)",
3085 power_well->name, power_well->count, enabled);
3088 for_each_power_domain(domain, power_well->domains)
3089 domains_count += power_domains->domain_use_count[domain];
3091 if (power_well->count != domains_count) {
3092 DRM_ERROR("power well %s refcount/domain refcount mismatch "
3093 "(refcount %d/domains refcount %d)\n",
3094 power_well->name, power_well->count,
3096 dump_domain_info = true;
3100 if (dump_domain_info) {
3104 intel_power_domains_dump_info(dev_priv);
3109 mutex_unlock(&power_domains->lock);
3113 * intel_runtime_pm_get - grab a runtime pm reference
3114 * @dev_priv: i915 device instance
3116 * This function grabs a device-level runtime pm reference (mostly used for GEM
3117 * code to ensure the GTT or GT is on) and ensures that it is powered up.
3119 * Any runtime pm reference obtained by this function must have a symmetric
3120 * call to intel_runtime_pm_put() to release the reference again.
3122 void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
3124 struct pci_dev *pdev = dev_priv->drm.pdev;
3125 struct device *kdev = &pdev->dev;
3128 ret = pm_runtime_get_sync(kdev);
3129 WARN_ONCE(ret < 0, "pm_runtime_get_sync() failed: %d\n", ret);
3131 atomic_inc(&dev_priv->runtime_pm.wakeref_count);
3132 assert_rpm_wakelock_held(dev_priv);
3136 * intel_runtime_pm_get_if_in_use - grab a runtime pm reference if device in use
3137 * @dev_priv: i915 device instance
3139 * This function grabs a device-level runtime pm reference if the device is
3140 * already in use and ensures that it is powered up.
3142 * Any runtime pm reference obtained by this function must have a symmetric
3143 * call to intel_runtime_pm_put() to release the reference again.
3145 bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv)
3147 struct pci_dev *pdev = dev_priv->drm.pdev;
3148 struct device *kdev = &pdev->dev;
3150 if (IS_ENABLED(CONFIG_PM)) {
3151 int ret = pm_runtime_get_if_in_use(kdev);
3154 * In cases runtime PM is disabled by the RPM core and we get
3155 * an -EINVAL return value we are not supposed to call this
3156 * function, since the power state is undefined. This applies
3157 * atm to the late/early system suspend/resume handlers.
3160 "pm_runtime_get_if_in_use() failed: %d\n", ret);
3165 atomic_inc(&dev_priv->runtime_pm.wakeref_count);
3166 assert_rpm_wakelock_held(dev_priv);
3172 * intel_runtime_pm_get_noresume - grab a runtime pm reference
3173 * @dev_priv: i915 device instance
3175 * This function grabs a device-level runtime pm reference (mostly used for GEM
3176 * code to ensure the GTT or GT is on).
3178 * It will _not_ power up the device but instead only check that it's powered
3179 * on. Therefore it is only valid to call this functions from contexts where
3180 * the device is known to be powered up and where trying to power it up would
3181 * result in hilarity and deadlocks. That pretty much means only the system
3182 * suspend/resume code where this is used to grab runtime pm references for
3183 * delayed setup down in work items.
3185 * Any runtime pm reference obtained by this function must have a symmetric
3186 * call to intel_runtime_pm_put() to release the reference again.
3188 void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
3190 struct pci_dev *pdev = dev_priv->drm.pdev;
3191 struct device *kdev = &pdev->dev;
3193 assert_rpm_wakelock_held(dev_priv);
3194 pm_runtime_get_noresume(kdev);
3196 atomic_inc(&dev_priv->runtime_pm.wakeref_count);
3200 * intel_runtime_pm_put - release a runtime pm reference
3201 * @dev_priv: i915 device instance
3203 * This function drops the device-level runtime pm reference obtained by
3204 * intel_runtime_pm_get() and might power down the corresponding
3205 * hardware block right away if this is the last reference.
3207 void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
3209 struct pci_dev *pdev = dev_priv->drm.pdev;
3210 struct device *kdev = &pdev->dev;
3212 assert_rpm_wakelock_held(dev_priv);
3213 atomic_dec(&dev_priv->runtime_pm.wakeref_count);
3215 pm_runtime_mark_last_busy(kdev);
3216 pm_runtime_put_autosuspend(kdev);
3220 * intel_runtime_pm_enable - enable runtime pm
3221 * @dev_priv: i915 device instance
3223 * This function enables runtime pm at the end of the driver load sequence.
3225 * Note that this function does currently not enable runtime pm for the
3226 * subordinate display power domains. That is only done on the first modeset
3227 * using intel_display_set_init_power().
3229 void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
3231 struct pci_dev *pdev = dev_priv->drm.pdev;
3232 struct device *kdev = &pdev->dev;
3234 pm_runtime_set_autosuspend_delay(kdev, 10000); /* 10s */
3235 pm_runtime_mark_last_busy(kdev);
3238 * Take a permanent reference to disable the RPM functionality and drop
3239 * it only when unloading the driver. Use the low level get/put helpers,
3240 * so the driver's own RPM reference tracking asserts also work on
3241 * platforms without RPM support.
3243 if (!HAS_RUNTIME_PM(dev_priv)) {
3246 pm_runtime_dont_use_autosuspend(kdev);
3247 ret = pm_runtime_get_sync(kdev);
3248 WARN(ret < 0, "pm_runtime_get_sync() failed: %d\n", ret);
3250 pm_runtime_use_autosuspend(kdev);
3254 * The core calls the driver load handler with an RPM reference held.
3255 * We drop that here and will reacquire it during unloading in
3256 * intel_power_domains_fini().
3258 pm_runtime_put_autosuspend(kdev);