2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include "intel_frontbuffer.h"
38 #include <drm/i915_drm.h>
40 #include "i915_gem_clflush.h"
41 #include "intel_dsi.h"
42 #include "i915_trace.h"
43 #include <drm/drm_atomic.h>
44 #include <drm/drm_atomic_helper.h>
45 #include <drm/drm_dp_helper.h>
46 #include <drm/drm_crtc_helper.h>
47 #include <drm/drm_plane_helper.h>
48 #include <drm/drm_rect.h>
49 #include <linux/dma_remapping.h>
50 #include <linux/reservation.h>
52 /* Primary plane formats for gen <= 3 */
53 static const uint32_t i8xx_primary_formats[] = {
60 /* Primary plane formats for gen >= 4 */
61 static const uint32_t i965_primary_formats[] = {
66 DRM_FORMAT_XRGB2101010,
67 DRM_FORMAT_XBGR2101010,
70 static const uint64_t i9xx_format_modifiers[] = {
71 I915_FORMAT_MOD_X_TILED,
72 DRM_FORMAT_MOD_LINEAR,
73 DRM_FORMAT_MOD_INVALID
76 static const uint32_t skl_primary_formats[] = {
83 DRM_FORMAT_XRGB2101010,
84 DRM_FORMAT_XBGR2101010,
91 static const uint64_t skl_format_modifiers_noccs[] = {
92 I915_FORMAT_MOD_Yf_TILED,
93 I915_FORMAT_MOD_Y_TILED,
94 I915_FORMAT_MOD_X_TILED,
95 DRM_FORMAT_MOD_LINEAR,
96 DRM_FORMAT_MOD_INVALID
99 static const uint64_t skl_format_modifiers_ccs[] = {
100 I915_FORMAT_MOD_Yf_TILED_CCS,
101 I915_FORMAT_MOD_Y_TILED_CCS,
102 I915_FORMAT_MOD_Yf_TILED,
103 I915_FORMAT_MOD_Y_TILED,
104 I915_FORMAT_MOD_X_TILED,
105 DRM_FORMAT_MOD_LINEAR,
106 DRM_FORMAT_MOD_INVALID
110 static const uint32_t intel_cursor_formats[] = {
114 static const uint64_t cursor_format_modifiers[] = {
115 DRM_FORMAT_MOD_LINEAR,
116 DRM_FORMAT_MOD_INVALID
119 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
120 struct intel_crtc_state *pipe_config);
121 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
122 struct intel_crtc_state *pipe_config);
124 static int intel_framebuffer_init(struct intel_framebuffer *ifb,
125 struct drm_i915_gem_object *obj,
126 struct drm_mode_fb_cmd2 *mode_cmd);
127 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
128 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
129 static void intel_set_pipe_src_size(struct intel_crtc *intel_crtc);
130 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
131 struct intel_link_m_n *m_n,
132 struct intel_link_m_n *m2_n2);
133 static void ironlake_set_pipeconf(struct drm_crtc *crtc);
134 static void haswell_set_pipeconf(struct drm_crtc *crtc);
135 static void haswell_set_pipemisc(struct drm_crtc *crtc);
136 static void vlv_prepare_pll(struct intel_crtc *crtc,
137 const struct intel_crtc_state *pipe_config);
138 static void chv_prepare_pll(struct intel_crtc *crtc,
139 const struct intel_crtc_state *pipe_config);
140 static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
141 static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
142 static void intel_crtc_init_scalers(struct intel_crtc *crtc,
143 struct intel_crtc_state *crtc_state);
144 static void skylake_pfit_enable(struct intel_crtc *crtc);
145 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
146 static void ironlake_pfit_enable(struct intel_crtc *crtc);
147 static void intel_modeset_setup_hw_state(struct drm_device *dev,
148 struct drm_modeset_acquire_ctx *ctx);
149 static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
154 } dot, vco, n, m, m1, m2, p, p1;
158 int p2_slow, p2_fast;
162 /* returns HPLL frequency in kHz */
163 int vlv_get_hpll_vco(struct drm_i915_private *dev_priv)
165 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
167 /* Obtain SKU information */
168 mutex_lock(&dev_priv->sb_lock);
169 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
170 CCK_FUSE_HPLL_FREQ_MASK;
171 mutex_unlock(&dev_priv->sb_lock);
173 return vco_freq[hpll_freq] * 1000;
176 int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
177 const char *name, u32 reg, int ref_freq)
182 mutex_lock(&dev_priv->sb_lock);
183 val = vlv_cck_read(dev_priv, reg);
184 mutex_unlock(&dev_priv->sb_lock);
186 divider = val & CCK_FREQUENCY_VALUES;
188 WARN((val & CCK_FREQUENCY_STATUS) !=
189 (divider << CCK_FREQUENCY_STATUS_SHIFT),
190 "%s change in progress\n", name);
192 return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1);
195 int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
196 const char *name, u32 reg)
198 if (dev_priv->hpll_freq == 0)
199 dev_priv->hpll_freq = vlv_get_hpll_vco(dev_priv);
201 return vlv_get_cck_clock(dev_priv, name, reg,
202 dev_priv->hpll_freq);
205 static void intel_update_czclk(struct drm_i915_private *dev_priv)
207 if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
210 dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
211 CCK_CZ_CLOCK_CONTROL);
213 DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
216 static inline u32 /* units of 100MHz */
217 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
218 const struct intel_crtc_state *pipe_config)
220 if (HAS_DDI(dev_priv))
221 return pipe_config->port_clock; /* SPLL */
222 else if (IS_GEN5(dev_priv))
223 return ((I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2) * 10000;
228 static const struct intel_limit intel_limits_i8xx_dac = {
229 .dot = { .min = 25000, .max = 350000 },
230 .vco = { .min = 908000, .max = 1512000 },
231 .n = { .min = 2, .max = 16 },
232 .m = { .min = 96, .max = 140 },
233 .m1 = { .min = 18, .max = 26 },
234 .m2 = { .min = 6, .max = 16 },
235 .p = { .min = 4, .max = 128 },
236 .p1 = { .min = 2, .max = 33 },
237 .p2 = { .dot_limit = 165000,
238 .p2_slow = 4, .p2_fast = 2 },
241 static const struct intel_limit intel_limits_i8xx_dvo = {
242 .dot = { .min = 25000, .max = 350000 },
243 .vco = { .min = 908000, .max = 1512000 },
244 .n = { .min = 2, .max = 16 },
245 .m = { .min = 96, .max = 140 },
246 .m1 = { .min = 18, .max = 26 },
247 .m2 = { .min = 6, .max = 16 },
248 .p = { .min = 4, .max = 128 },
249 .p1 = { .min = 2, .max = 33 },
250 .p2 = { .dot_limit = 165000,
251 .p2_slow = 4, .p2_fast = 4 },
254 static const struct intel_limit intel_limits_i8xx_lvds = {
255 .dot = { .min = 25000, .max = 350000 },
256 .vco = { .min = 908000, .max = 1512000 },
257 .n = { .min = 2, .max = 16 },
258 .m = { .min = 96, .max = 140 },
259 .m1 = { .min = 18, .max = 26 },
260 .m2 = { .min = 6, .max = 16 },
261 .p = { .min = 4, .max = 128 },
262 .p1 = { .min = 1, .max = 6 },
263 .p2 = { .dot_limit = 165000,
264 .p2_slow = 14, .p2_fast = 7 },
267 static const struct intel_limit intel_limits_i9xx_sdvo = {
268 .dot = { .min = 20000, .max = 400000 },
269 .vco = { .min = 1400000, .max = 2800000 },
270 .n = { .min = 1, .max = 6 },
271 .m = { .min = 70, .max = 120 },
272 .m1 = { .min = 8, .max = 18 },
273 .m2 = { .min = 3, .max = 7 },
274 .p = { .min = 5, .max = 80 },
275 .p1 = { .min = 1, .max = 8 },
276 .p2 = { .dot_limit = 200000,
277 .p2_slow = 10, .p2_fast = 5 },
280 static const struct intel_limit intel_limits_i9xx_lvds = {
281 .dot = { .min = 20000, .max = 400000 },
282 .vco = { .min = 1400000, .max = 2800000 },
283 .n = { .min = 1, .max = 6 },
284 .m = { .min = 70, .max = 120 },
285 .m1 = { .min = 8, .max = 18 },
286 .m2 = { .min = 3, .max = 7 },
287 .p = { .min = 7, .max = 98 },
288 .p1 = { .min = 1, .max = 8 },
289 .p2 = { .dot_limit = 112000,
290 .p2_slow = 14, .p2_fast = 7 },
294 static const struct intel_limit intel_limits_g4x_sdvo = {
295 .dot = { .min = 25000, .max = 270000 },
296 .vco = { .min = 1750000, .max = 3500000},
297 .n = { .min = 1, .max = 4 },
298 .m = { .min = 104, .max = 138 },
299 .m1 = { .min = 17, .max = 23 },
300 .m2 = { .min = 5, .max = 11 },
301 .p = { .min = 10, .max = 30 },
302 .p1 = { .min = 1, .max = 3},
303 .p2 = { .dot_limit = 270000,
309 static const struct intel_limit intel_limits_g4x_hdmi = {
310 .dot = { .min = 22000, .max = 400000 },
311 .vco = { .min = 1750000, .max = 3500000},
312 .n = { .min = 1, .max = 4 },
313 .m = { .min = 104, .max = 138 },
314 .m1 = { .min = 16, .max = 23 },
315 .m2 = { .min = 5, .max = 11 },
316 .p = { .min = 5, .max = 80 },
317 .p1 = { .min = 1, .max = 8},
318 .p2 = { .dot_limit = 165000,
319 .p2_slow = 10, .p2_fast = 5 },
322 static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
323 .dot = { .min = 20000, .max = 115000 },
324 .vco = { .min = 1750000, .max = 3500000 },
325 .n = { .min = 1, .max = 3 },
326 .m = { .min = 104, .max = 138 },
327 .m1 = { .min = 17, .max = 23 },
328 .m2 = { .min = 5, .max = 11 },
329 .p = { .min = 28, .max = 112 },
330 .p1 = { .min = 2, .max = 8 },
331 .p2 = { .dot_limit = 0,
332 .p2_slow = 14, .p2_fast = 14
336 static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
337 .dot = { .min = 80000, .max = 224000 },
338 .vco = { .min = 1750000, .max = 3500000 },
339 .n = { .min = 1, .max = 3 },
340 .m = { .min = 104, .max = 138 },
341 .m1 = { .min = 17, .max = 23 },
342 .m2 = { .min = 5, .max = 11 },
343 .p = { .min = 14, .max = 42 },
344 .p1 = { .min = 2, .max = 6 },
345 .p2 = { .dot_limit = 0,
346 .p2_slow = 7, .p2_fast = 7
350 static const struct intel_limit intel_limits_pineview_sdvo = {
351 .dot = { .min = 20000, .max = 400000},
352 .vco = { .min = 1700000, .max = 3500000 },
353 /* Pineview's Ncounter is a ring counter */
354 .n = { .min = 3, .max = 6 },
355 .m = { .min = 2, .max = 256 },
356 /* Pineview only has one combined m divider, which we treat as m2. */
357 .m1 = { .min = 0, .max = 0 },
358 .m2 = { .min = 0, .max = 254 },
359 .p = { .min = 5, .max = 80 },
360 .p1 = { .min = 1, .max = 8 },
361 .p2 = { .dot_limit = 200000,
362 .p2_slow = 10, .p2_fast = 5 },
365 static const struct intel_limit intel_limits_pineview_lvds = {
366 .dot = { .min = 20000, .max = 400000 },
367 .vco = { .min = 1700000, .max = 3500000 },
368 .n = { .min = 3, .max = 6 },
369 .m = { .min = 2, .max = 256 },
370 .m1 = { .min = 0, .max = 0 },
371 .m2 = { .min = 0, .max = 254 },
372 .p = { .min = 7, .max = 112 },
373 .p1 = { .min = 1, .max = 8 },
374 .p2 = { .dot_limit = 112000,
375 .p2_slow = 14, .p2_fast = 14 },
378 /* Ironlake / Sandybridge
380 * We calculate clock using (register_value + 2) for N/M1/M2, so here
381 * the range value for them is (actual_value - 2).
383 static const struct intel_limit intel_limits_ironlake_dac = {
384 .dot = { .min = 25000, .max = 350000 },
385 .vco = { .min = 1760000, .max = 3510000 },
386 .n = { .min = 1, .max = 5 },
387 .m = { .min = 79, .max = 127 },
388 .m1 = { .min = 12, .max = 22 },
389 .m2 = { .min = 5, .max = 9 },
390 .p = { .min = 5, .max = 80 },
391 .p1 = { .min = 1, .max = 8 },
392 .p2 = { .dot_limit = 225000,
393 .p2_slow = 10, .p2_fast = 5 },
396 static const struct intel_limit intel_limits_ironlake_single_lvds = {
397 .dot = { .min = 25000, .max = 350000 },
398 .vco = { .min = 1760000, .max = 3510000 },
399 .n = { .min = 1, .max = 3 },
400 .m = { .min = 79, .max = 118 },
401 .m1 = { .min = 12, .max = 22 },
402 .m2 = { .min = 5, .max = 9 },
403 .p = { .min = 28, .max = 112 },
404 .p1 = { .min = 2, .max = 8 },
405 .p2 = { .dot_limit = 225000,
406 .p2_slow = 14, .p2_fast = 14 },
409 static const struct intel_limit intel_limits_ironlake_dual_lvds = {
410 .dot = { .min = 25000, .max = 350000 },
411 .vco = { .min = 1760000, .max = 3510000 },
412 .n = { .min = 1, .max = 3 },
413 .m = { .min = 79, .max = 127 },
414 .m1 = { .min = 12, .max = 22 },
415 .m2 = { .min = 5, .max = 9 },
416 .p = { .min = 14, .max = 56 },
417 .p1 = { .min = 2, .max = 8 },
418 .p2 = { .dot_limit = 225000,
419 .p2_slow = 7, .p2_fast = 7 },
422 /* LVDS 100mhz refclk limits. */
423 static const struct intel_limit intel_limits_ironlake_single_lvds_100m = {
424 .dot = { .min = 25000, .max = 350000 },
425 .vco = { .min = 1760000, .max = 3510000 },
426 .n = { .min = 1, .max = 2 },
427 .m = { .min = 79, .max = 126 },
428 .m1 = { .min = 12, .max = 22 },
429 .m2 = { .min = 5, .max = 9 },
430 .p = { .min = 28, .max = 112 },
431 .p1 = { .min = 2, .max = 8 },
432 .p2 = { .dot_limit = 225000,
433 .p2_slow = 14, .p2_fast = 14 },
436 static const struct intel_limit intel_limits_ironlake_dual_lvds_100m = {
437 .dot = { .min = 25000, .max = 350000 },
438 .vco = { .min = 1760000, .max = 3510000 },
439 .n = { .min = 1, .max = 3 },
440 .m = { .min = 79, .max = 126 },
441 .m1 = { .min = 12, .max = 22 },
442 .m2 = { .min = 5, .max = 9 },
443 .p = { .min = 14, .max = 42 },
444 .p1 = { .min = 2, .max = 6 },
445 .p2 = { .dot_limit = 225000,
446 .p2_slow = 7, .p2_fast = 7 },
449 static const struct intel_limit intel_limits_vlv = {
451 * These are the data rate limits (measured in fast clocks)
452 * since those are the strictest limits we have. The fast
453 * clock and actual rate limits are more relaxed, so checking
454 * them would make no difference.
456 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
457 .vco = { .min = 4000000, .max = 6000000 },
458 .n = { .min = 1, .max = 7 },
459 .m1 = { .min = 2, .max = 3 },
460 .m2 = { .min = 11, .max = 156 },
461 .p1 = { .min = 2, .max = 3 },
462 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
465 static const struct intel_limit intel_limits_chv = {
467 * These are the data rate limits (measured in fast clocks)
468 * since those are the strictest limits we have. The fast
469 * clock and actual rate limits are more relaxed, so checking
470 * them would make no difference.
472 .dot = { .min = 25000 * 5, .max = 540000 * 5},
473 .vco = { .min = 4800000, .max = 6480000 },
474 .n = { .min = 1, .max = 1 },
475 .m1 = { .min = 2, .max = 2 },
476 .m2 = { .min = 24 << 22, .max = 175 << 22 },
477 .p1 = { .min = 2, .max = 4 },
478 .p2 = { .p2_slow = 1, .p2_fast = 14 },
481 static const struct intel_limit intel_limits_bxt = {
482 /* FIXME: find real dot limits */
483 .dot = { .min = 0, .max = INT_MAX },
484 .vco = { .min = 4800000, .max = 6700000 },
485 .n = { .min = 1, .max = 1 },
486 .m1 = { .min = 2, .max = 2 },
487 /* FIXME: find real m2 limits */
488 .m2 = { .min = 2 << 22, .max = 255 << 22 },
489 .p1 = { .min = 2, .max = 4 },
490 .p2 = { .p2_slow = 1, .p2_fast = 20 },
494 needs_modeset(struct drm_crtc_state *state)
496 return drm_atomic_crtc_needs_modeset(state);
500 * Platform specific helpers to calculate the port PLL loopback- (clock.m),
501 * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
502 * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
503 * The helpers' return value is the rate of the clock that is fed to the
504 * display engine's pipe which can be the above fast dot clock rate or a
505 * divided-down version of it.
507 /* m1 is reserved as 0 in Pineview, n is a ring counter */
508 static int pnv_calc_dpll_params(int refclk, struct dpll *clock)
510 clock->m = clock->m2 + 2;
511 clock->p = clock->p1 * clock->p2;
512 if (WARN_ON(clock->n == 0 || clock->p == 0))
514 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
515 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
520 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
522 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
525 static int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
527 clock->m = i9xx_dpll_compute_m(clock);
528 clock->p = clock->p1 * clock->p2;
529 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
531 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
532 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
537 static int vlv_calc_dpll_params(int refclk, struct dpll *clock)
539 clock->m = clock->m1 * clock->m2;
540 clock->p = clock->p1 * clock->p2;
541 if (WARN_ON(clock->n == 0 || clock->p == 0))
543 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
544 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
546 return clock->dot / 5;
549 int chv_calc_dpll_params(int refclk, struct dpll *clock)
551 clock->m = clock->m1 * clock->m2;
552 clock->p = clock->p1 * clock->p2;
553 if (WARN_ON(clock->n == 0 || clock->p == 0))
555 clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
557 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
559 return clock->dot / 5;
562 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
564 * Returns whether the given set of divisors are valid for a given refclk with
565 * the given connectors.
568 static bool intel_PLL_is_valid(struct drm_i915_private *dev_priv,
569 const struct intel_limit *limit,
570 const struct dpll *clock)
572 if (clock->n < limit->n.min || limit->n.max < clock->n)
573 INTELPllInvalid("n out of range\n");
574 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
575 INTELPllInvalid("p1 out of range\n");
576 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
577 INTELPllInvalid("m2 out of range\n");
578 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
579 INTELPllInvalid("m1 out of range\n");
581 if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
582 !IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
583 if (clock->m1 <= clock->m2)
584 INTELPllInvalid("m1 <= m2\n");
586 if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
587 !IS_GEN9_LP(dev_priv)) {
588 if (clock->p < limit->p.min || limit->p.max < clock->p)
589 INTELPllInvalid("p out of range\n");
590 if (clock->m < limit->m.min || limit->m.max < clock->m)
591 INTELPllInvalid("m out of range\n");
594 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
595 INTELPllInvalid("vco out of range\n");
596 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
597 * connector, etc., rather than just a single range.
599 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
600 INTELPllInvalid("dot out of range\n");
606 i9xx_select_p2_div(const struct intel_limit *limit,
607 const struct intel_crtc_state *crtc_state,
610 struct drm_device *dev = crtc_state->base.crtc->dev;
612 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
614 * For LVDS just rely on its current settings for dual-channel.
615 * We haven't figured out how to reliably set up different
616 * single/dual channel state, if we even can.
618 if (intel_is_dual_link_lvds(dev))
619 return limit->p2.p2_fast;
621 return limit->p2.p2_slow;
623 if (target < limit->p2.dot_limit)
624 return limit->p2.p2_slow;
626 return limit->p2.p2_fast;
631 * Returns a set of divisors for the desired target clock with the given
632 * refclk, or FALSE. The returned values represent the clock equation:
633 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
635 * Target and reference clocks are specified in kHz.
637 * If match_clock is provided, then best_clock P divider must match the P
638 * divider from @match_clock used for LVDS downclocking.
641 i9xx_find_best_dpll(const struct intel_limit *limit,
642 struct intel_crtc_state *crtc_state,
643 int target, int refclk, struct dpll *match_clock,
644 struct dpll *best_clock)
646 struct drm_device *dev = crtc_state->base.crtc->dev;
650 memset(best_clock, 0, sizeof(*best_clock));
652 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
654 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
656 for (clock.m2 = limit->m2.min;
657 clock.m2 <= limit->m2.max; clock.m2++) {
658 if (clock.m2 >= clock.m1)
660 for (clock.n = limit->n.min;
661 clock.n <= limit->n.max; clock.n++) {
662 for (clock.p1 = limit->p1.min;
663 clock.p1 <= limit->p1.max; clock.p1++) {
666 i9xx_calc_dpll_params(refclk, &clock);
667 if (!intel_PLL_is_valid(to_i915(dev),
672 clock.p != match_clock->p)
675 this_err = abs(clock.dot - target);
676 if (this_err < err) {
685 return (err != target);
689 * Returns a set of divisors for the desired target clock with the given
690 * refclk, or FALSE. The returned values represent the clock equation:
691 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
693 * Target and reference clocks are specified in kHz.
695 * If match_clock is provided, then best_clock P divider must match the P
696 * divider from @match_clock used for LVDS downclocking.
699 pnv_find_best_dpll(const struct intel_limit *limit,
700 struct intel_crtc_state *crtc_state,
701 int target, int refclk, struct dpll *match_clock,
702 struct dpll *best_clock)
704 struct drm_device *dev = crtc_state->base.crtc->dev;
708 memset(best_clock, 0, sizeof(*best_clock));
710 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
712 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
714 for (clock.m2 = limit->m2.min;
715 clock.m2 <= limit->m2.max; clock.m2++) {
716 for (clock.n = limit->n.min;
717 clock.n <= limit->n.max; clock.n++) {
718 for (clock.p1 = limit->p1.min;
719 clock.p1 <= limit->p1.max; clock.p1++) {
722 pnv_calc_dpll_params(refclk, &clock);
723 if (!intel_PLL_is_valid(to_i915(dev),
728 clock.p != match_clock->p)
731 this_err = abs(clock.dot - target);
732 if (this_err < err) {
741 return (err != target);
745 * Returns a set of divisors for the desired target clock with the given
746 * refclk, or FALSE. The returned values represent the clock equation:
747 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
749 * Target and reference clocks are specified in kHz.
751 * If match_clock is provided, then best_clock P divider must match the P
752 * divider from @match_clock used for LVDS downclocking.
755 g4x_find_best_dpll(const struct intel_limit *limit,
756 struct intel_crtc_state *crtc_state,
757 int target, int refclk, struct dpll *match_clock,
758 struct dpll *best_clock)
760 struct drm_device *dev = crtc_state->base.crtc->dev;
764 /* approximately equals target * 0.00585 */
765 int err_most = (target >> 8) + (target >> 9);
767 memset(best_clock, 0, sizeof(*best_clock));
769 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
771 max_n = limit->n.max;
772 /* based on hardware requirement, prefer smaller n to precision */
773 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
774 /* based on hardware requirement, prefere larger m1,m2 */
775 for (clock.m1 = limit->m1.max;
776 clock.m1 >= limit->m1.min; clock.m1--) {
777 for (clock.m2 = limit->m2.max;
778 clock.m2 >= limit->m2.min; clock.m2--) {
779 for (clock.p1 = limit->p1.max;
780 clock.p1 >= limit->p1.min; clock.p1--) {
783 i9xx_calc_dpll_params(refclk, &clock);
784 if (!intel_PLL_is_valid(to_i915(dev),
789 this_err = abs(clock.dot - target);
790 if (this_err < err_most) {
804 * Check if the calculated PLL configuration is more optimal compared to the
805 * best configuration and error found so far. Return the calculated error.
807 static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
808 const struct dpll *calculated_clock,
809 const struct dpll *best_clock,
810 unsigned int best_error_ppm,
811 unsigned int *error_ppm)
814 * For CHV ignore the error and consider only the P value.
815 * Prefer a bigger P value based on HW requirements.
817 if (IS_CHERRYVIEW(to_i915(dev))) {
820 return calculated_clock->p > best_clock->p;
823 if (WARN_ON_ONCE(!target_freq))
826 *error_ppm = div_u64(1000000ULL *
827 abs(target_freq - calculated_clock->dot),
830 * Prefer a better P value over a better (smaller) error if the error
831 * is small. Ensure this preference for future configurations too by
832 * setting the error to 0.
834 if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
840 return *error_ppm + 10 < best_error_ppm;
844 * Returns a set of divisors for the desired target clock with the given
845 * refclk, or FALSE. The returned values represent the clock equation:
846 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
849 vlv_find_best_dpll(const struct intel_limit *limit,
850 struct intel_crtc_state *crtc_state,
851 int target, int refclk, struct dpll *match_clock,
852 struct dpll *best_clock)
854 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
855 struct drm_device *dev = crtc->base.dev;
857 unsigned int bestppm = 1000000;
858 /* min update 19.2 MHz */
859 int max_n = min(limit->n.max, refclk / 19200);
862 target *= 5; /* fast clock */
864 memset(best_clock, 0, sizeof(*best_clock));
866 /* based on hardware requirement, prefer smaller n to precision */
867 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
868 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
869 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
870 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
871 clock.p = clock.p1 * clock.p2;
872 /* based on hardware requirement, prefer bigger m1,m2 values */
873 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
876 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
879 vlv_calc_dpll_params(refclk, &clock);
881 if (!intel_PLL_is_valid(to_i915(dev),
886 if (!vlv_PLL_is_optimal(dev, target,
904 * Returns a set of divisors for the desired target clock with the given
905 * refclk, or FALSE. The returned values represent the clock equation:
906 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
909 chv_find_best_dpll(const struct intel_limit *limit,
910 struct intel_crtc_state *crtc_state,
911 int target, int refclk, struct dpll *match_clock,
912 struct dpll *best_clock)
914 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
915 struct drm_device *dev = crtc->base.dev;
916 unsigned int best_error_ppm;
921 memset(best_clock, 0, sizeof(*best_clock));
922 best_error_ppm = 1000000;
925 * Based on hardware doc, the n always set to 1, and m1 always
926 * set to 2. If requires to support 200Mhz refclk, we need to
927 * revisit this because n may not 1 anymore.
929 clock.n = 1, clock.m1 = 2;
930 target *= 5; /* fast clock */
932 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
933 for (clock.p2 = limit->p2.p2_fast;
934 clock.p2 >= limit->p2.p2_slow;
935 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
936 unsigned int error_ppm;
938 clock.p = clock.p1 * clock.p2;
940 m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
941 clock.n) << 22, refclk * clock.m1);
943 if (m2 > INT_MAX/clock.m1)
948 chv_calc_dpll_params(refclk, &clock);
950 if (!intel_PLL_is_valid(to_i915(dev), limit, &clock))
953 if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
954 best_error_ppm, &error_ppm))
958 best_error_ppm = error_ppm;
966 bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
967 struct dpll *best_clock)
970 const struct intel_limit *limit = &intel_limits_bxt;
972 return chv_find_best_dpll(limit, crtc_state,
973 target_clock, refclk, NULL, best_clock);
976 bool intel_crtc_active(struct intel_crtc *crtc)
978 /* Be paranoid as we can arrive here with only partial
979 * state retrieved from the hardware during setup.
981 * We can ditch the adjusted_mode.crtc_clock check as soon
982 * as Haswell has gained clock readout/fastboot support.
984 * We can ditch the crtc->primary->fb check as soon as we can
985 * properly reconstruct framebuffers.
987 * FIXME: The intel_crtc->active here should be switched to
988 * crtc->state->active once we have proper CRTC states wired up
991 return crtc->active && crtc->base.primary->state->fb &&
992 crtc->config->base.adjusted_mode.crtc_clock;
995 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
998 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
1000 return crtc->config->cpu_transcoder;
1003 static bool pipe_scanline_is_moving(struct drm_i915_private *dev_priv,
1006 i915_reg_t reg = PIPEDSL(pipe);
1010 if (IS_GEN2(dev_priv))
1011 line_mask = DSL_LINEMASK_GEN2;
1013 line_mask = DSL_LINEMASK_GEN3;
1015 line1 = I915_READ(reg) & line_mask;
1017 line2 = I915_READ(reg) & line_mask;
1019 return line1 != line2;
1022 static void wait_for_pipe_scanline_moving(struct intel_crtc *crtc, bool state)
1024 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1025 enum pipe pipe = crtc->pipe;
1027 /* Wait for the display line to settle/start moving */
1028 if (wait_for(pipe_scanline_is_moving(dev_priv, pipe) == state, 100))
1029 DRM_ERROR("pipe %c scanline %s wait timed out\n",
1030 pipe_name(pipe), onoff(state));
1033 static void intel_wait_for_pipe_scanline_stopped(struct intel_crtc *crtc)
1035 wait_for_pipe_scanline_moving(crtc, false);
1038 static void intel_wait_for_pipe_scanline_moving(struct intel_crtc *crtc)
1040 wait_for_pipe_scanline_moving(crtc, true);
1044 * intel_wait_for_pipe_off - wait for pipe to turn off
1045 * @crtc: crtc whose pipe to wait for
1047 * After disabling a pipe, we can't wait for vblank in the usual way,
1048 * spinning on the vblank interrupt status bit, since we won't actually
1049 * see an interrupt when the pipe is disabled.
1051 * On Gen4 and above:
1052 * wait for the pipe register state bit to turn off
1055 * wait for the display line value to settle (it usually
1056 * ends up stopping at the start of the next frame).
1059 static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
1061 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1062 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1064 if (INTEL_GEN(dev_priv) >= 4) {
1065 i915_reg_t reg = PIPECONF(cpu_transcoder);
1067 /* Wait for the Pipe State to go off */
1068 if (intel_wait_for_register(dev_priv,
1069 reg, I965_PIPECONF_ACTIVE, 0,
1071 WARN(1, "pipe_off wait timed out\n");
1073 intel_wait_for_pipe_scanline_stopped(crtc);
1077 /* Only for pre-ILK configs */
1078 void assert_pll(struct drm_i915_private *dev_priv,
1079 enum pipe pipe, bool state)
1084 val = I915_READ(DPLL(pipe));
1085 cur_state = !!(val & DPLL_VCO_ENABLE);
1086 I915_STATE_WARN(cur_state != state,
1087 "PLL state assertion failure (expected %s, current %s)\n",
1088 onoff(state), onoff(cur_state));
1091 /* XXX: the dsi pll is shared between MIPI DSI ports */
1092 void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1097 mutex_lock(&dev_priv->sb_lock);
1098 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1099 mutex_unlock(&dev_priv->sb_lock);
1101 cur_state = val & DSI_PLL_VCO_EN;
1102 I915_STATE_WARN(cur_state != state,
1103 "DSI PLL state assertion failure (expected %s, current %s)\n",
1104 onoff(state), onoff(cur_state));
1107 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1108 enum pipe pipe, bool state)
1111 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1114 if (HAS_DDI(dev_priv)) {
1115 /* DDI does not have a specific FDI_TX register */
1116 u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
1117 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1119 u32 val = I915_READ(FDI_TX_CTL(pipe));
1120 cur_state = !!(val & FDI_TX_ENABLE);
1122 I915_STATE_WARN(cur_state != state,
1123 "FDI TX state assertion failure (expected %s, current %s)\n",
1124 onoff(state), onoff(cur_state));
1126 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1127 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1129 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1130 enum pipe pipe, bool state)
1135 val = I915_READ(FDI_RX_CTL(pipe));
1136 cur_state = !!(val & FDI_RX_ENABLE);
1137 I915_STATE_WARN(cur_state != state,
1138 "FDI RX state assertion failure (expected %s, current %s)\n",
1139 onoff(state), onoff(cur_state));
1141 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1142 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1144 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1149 /* ILK FDI PLL is always enabled */
1150 if (IS_GEN5(dev_priv))
1153 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1154 if (HAS_DDI(dev_priv))
1157 val = I915_READ(FDI_TX_CTL(pipe));
1158 I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1161 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1162 enum pipe pipe, bool state)
1167 val = I915_READ(FDI_RX_CTL(pipe));
1168 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1169 I915_STATE_WARN(cur_state != state,
1170 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1171 onoff(state), onoff(cur_state));
1174 void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe)
1178 enum pipe panel_pipe = PIPE_A;
1181 if (WARN_ON(HAS_DDI(dev_priv)))
1184 if (HAS_PCH_SPLIT(dev_priv)) {
1187 pp_reg = PP_CONTROL(0);
1188 port_sel = I915_READ(PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;
1190 if (port_sel == PANEL_PORT_SELECT_LVDS &&
1191 I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
1192 panel_pipe = PIPE_B;
1193 /* XXX: else fix for eDP */
1194 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
1195 /* presumably write lock depends on pipe, not port select */
1196 pp_reg = PP_CONTROL(pipe);
1199 pp_reg = PP_CONTROL(0);
1200 if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
1201 panel_pipe = PIPE_B;
1204 val = I915_READ(pp_reg);
1205 if (!(val & PANEL_POWER_ON) ||
1206 ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1209 I915_STATE_WARN(panel_pipe == pipe && locked,
1210 "panel assertion failure, pipe %c regs locked\n",
1214 static void assert_cursor(struct drm_i915_private *dev_priv,
1215 enum pipe pipe, bool state)
1219 if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
1220 cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
1222 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1224 I915_STATE_WARN(cur_state != state,
1225 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1226 pipe_name(pipe), onoff(state), onoff(cur_state));
1228 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1229 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1231 void assert_pipe(struct drm_i915_private *dev_priv,
1232 enum pipe pipe, bool state)
1235 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1237 enum intel_display_power_domain power_domain;
1239 /* we keep both pipes enabled on 830 */
1240 if (IS_I830(dev_priv))
1243 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
1244 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
1245 u32 val = I915_READ(PIPECONF(cpu_transcoder));
1246 cur_state = !!(val & PIPECONF_ENABLE);
1248 intel_display_power_put(dev_priv, power_domain);
1253 I915_STATE_WARN(cur_state != state,
1254 "pipe %c assertion failure (expected %s, current %s)\n",
1255 pipe_name(pipe), onoff(state), onoff(cur_state));
1258 static void assert_plane(struct drm_i915_private *dev_priv,
1259 enum plane plane, bool state)
1264 val = I915_READ(DSPCNTR(plane));
1265 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1266 I915_STATE_WARN(cur_state != state,
1267 "plane %c assertion failure (expected %s, current %s)\n",
1268 plane_name(plane), onoff(state), onoff(cur_state));
1271 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1272 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1274 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1279 /* Primary planes are fixed to pipes on gen4+ */
1280 if (INTEL_GEN(dev_priv) >= 4) {
1281 u32 val = I915_READ(DSPCNTR(pipe));
1282 I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
1283 "plane %c assertion failure, should be disabled but not\n",
1288 /* Need to check both planes against the pipe */
1289 for_each_pipe(dev_priv, i) {
1290 u32 val = I915_READ(DSPCNTR(i));
1291 enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1292 DISPPLANE_SEL_PIPE_SHIFT;
1293 I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1294 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1295 plane_name(i), pipe_name(pipe));
1299 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1304 if (INTEL_GEN(dev_priv) >= 9) {
1305 for_each_sprite(dev_priv, pipe, sprite) {
1306 u32 val = I915_READ(PLANE_CTL(pipe, sprite));
1307 I915_STATE_WARN(val & PLANE_CTL_ENABLE,
1308 "plane %d assertion failure, should be off on pipe %c but is still active\n",
1309 sprite, pipe_name(pipe));
1311 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
1312 for_each_sprite(dev_priv, pipe, sprite) {
1313 u32 val = I915_READ(SPCNTR(pipe, PLANE_SPRITE0 + sprite));
1314 I915_STATE_WARN(val & SP_ENABLE,
1315 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1316 sprite_name(pipe, sprite), pipe_name(pipe));
1318 } else if (INTEL_GEN(dev_priv) >= 7) {
1319 u32 val = I915_READ(SPRCTL(pipe));
1320 I915_STATE_WARN(val & SPRITE_ENABLE,
1321 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1322 plane_name(pipe), pipe_name(pipe));
1323 } else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) {
1324 u32 val = I915_READ(DVSCNTR(pipe));
1325 I915_STATE_WARN(val & DVS_ENABLE,
1326 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1327 plane_name(pipe), pipe_name(pipe));
1331 static void assert_vblank_disabled(struct drm_crtc *crtc)
1333 if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1334 drm_crtc_vblank_put(crtc);
1337 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1343 val = I915_READ(PCH_TRANSCONF(pipe));
1344 enabled = !!(val & TRANS_ENABLE);
1345 I915_STATE_WARN(enabled,
1346 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1350 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1351 enum pipe pipe, u32 port_sel, u32 val)
1353 if ((val & DP_PORT_EN) == 0)
1356 if (HAS_PCH_CPT(dev_priv)) {
1357 u32 trans_dp_ctl = I915_READ(TRANS_DP_CTL(pipe));
1358 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1360 } else if (IS_CHERRYVIEW(dev_priv)) {
1361 if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
1364 if ((val & DP_PIPE_MASK) != (pipe << 30))
1370 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1371 enum pipe pipe, u32 val)
1373 if ((val & SDVO_ENABLE) == 0)
1376 if (HAS_PCH_CPT(dev_priv)) {
1377 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1379 } else if (IS_CHERRYVIEW(dev_priv)) {
1380 if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
1383 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1389 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1390 enum pipe pipe, u32 val)
1392 if ((val & LVDS_PORT_EN) == 0)
1395 if (HAS_PCH_CPT(dev_priv)) {
1396 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1399 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1405 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1406 enum pipe pipe, u32 val)
1408 if ((val & ADPA_DAC_ENABLE) == 0)
1410 if (HAS_PCH_CPT(dev_priv)) {
1411 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1414 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1420 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1421 enum pipe pipe, i915_reg_t reg,
1424 u32 val = I915_READ(reg);
1425 I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1426 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1427 i915_mmio_reg_offset(reg), pipe_name(pipe));
1429 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & DP_PORT_EN) == 0
1430 && (val & DP_PIPEB_SELECT),
1431 "IBX PCH dp port still using transcoder B\n");
1434 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1435 enum pipe pipe, i915_reg_t reg)
1437 u32 val = I915_READ(reg);
1438 I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1439 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1440 i915_mmio_reg_offset(reg), pipe_name(pipe));
1442 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & SDVO_ENABLE) == 0
1443 && (val & SDVO_PIPE_B_SELECT),
1444 "IBX PCH hdmi port still using transcoder B\n");
1447 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1452 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1453 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1454 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1456 val = I915_READ(PCH_ADPA);
1457 I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1458 "PCH VGA enabled on transcoder %c, should be disabled\n",
1461 val = I915_READ(PCH_LVDS);
1462 I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1463 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1466 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1467 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1468 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1471 static void _vlv_enable_pll(struct intel_crtc *crtc,
1472 const struct intel_crtc_state *pipe_config)
1474 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1475 enum pipe pipe = crtc->pipe;
1477 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1478 POSTING_READ(DPLL(pipe));
1481 if (intel_wait_for_register(dev_priv,
1486 DRM_ERROR("DPLL %d failed to lock\n", pipe);
1489 static void vlv_enable_pll(struct intel_crtc *crtc,
1490 const struct intel_crtc_state *pipe_config)
1492 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1493 enum pipe pipe = crtc->pipe;
1495 assert_pipe_disabled(dev_priv, pipe);
1497 /* PLL is protected by panel, make sure we can write it */
1498 assert_panel_unlocked(dev_priv, pipe);
1500 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1501 _vlv_enable_pll(crtc, pipe_config);
1503 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1504 POSTING_READ(DPLL_MD(pipe));
1508 static void _chv_enable_pll(struct intel_crtc *crtc,
1509 const struct intel_crtc_state *pipe_config)
1511 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1512 enum pipe pipe = crtc->pipe;
1513 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1516 mutex_lock(&dev_priv->sb_lock);
1518 /* Enable back the 10bit clock to display controller */
1519 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1520 tmp |= DPIO_DCLKP_EN;
1521 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1523 mutex_unlock(&dev_priv->sb_lock);
1526 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1531 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1533 /* Check PLL is locked */
1534 if (intel_wait_for_register(dev_priv,
1535 DPLL(pipe), DPLL_LOCK_VLV, DPLL_LOCK_VLV,
1537 DRM_ERROR("PLL %d failed to lock\n", pipe);
1540 static void chv_enable_pll(struct intel_crtc *crtc,
1541 const struct intel_crtc_state *pipe_config)
1543 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1544 enum pipe pipe = crtc->pipe;
1546 assert_pipe_disabled(dev_priv, pipe);
1548 /* PLL is protected by panel, make sure we can write it */
1549 assert_panel_unlocked(dev_priv, pipe);
1551 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1552 _chv_enable_pll(crtc, pipe_config);
1554 if (pipe != PIPE_A) {
1556 * WaPixelRepeatModeFixForC0:chv
1558 * DPLLCMD is AWOL. Use chicken bits to propagate
1559 * the value from DPLLBMD to either pipe B or C.
1561 I915_WRITE(CBR4_VLV, CBR_DPLLBMD_PIPE(pipe));
1562 I915_WRITE(DPLL_MD(PIPE_B), pipe_config->dpll_hw_state.dpll_md);
1563 I915_WRITE(CBR4_VLV, 0);
1564 dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;
1567 * DPLLB VGA mode also seems to cause problems.
1568 * We should always have it disabled.
1570 WARN_ON((I915_READ(DPLL(PIPE_B)) & DPLL_VGA_MODE_DIS) == 0);
1572 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1573 POSTING_READ(DPLL_MD(pipe));
1577 static int intel_num_dvo_pipes(struct drm_i915_private *dev_priv)
1579 struct intel_crtc *crtc;
1582 for_each_intel_crtc(&dev_priv->drm, crtc) {
1583 count += crtc->base.state->active &&
1584 intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DVO);
1590 static void i9xx_enable_pll(struct intel_crtc *crtc,
1591 const struct intel_crtc_state *crtc_state)
1593 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1594 i915_reg_t reg = DPLL(crtc->pipe);
1595 u32 dpll = crtc_state->dpll_hw_state.dpll;
1598 assert_pipe_disabled(dev_priv, crtc->pipe);
1600 /* PLL is protected by panel, make sure we can write it */
1601 if (IS_MOBILE(dev_priv) && !IS_I830(dev_priv))
1602 assert_panel_unlocked(dev_priv, crtc->pipe);
1604 /* Enable DVO 2x clock on both PLLs if necessary */
1605 if (IS_I830(dev_priv) && intel_num_dvo_pipes(dev_priv) > 0) {
1607 * It appears to be important that we don't enable this
1608 * for the current pipe before otherwise configuring the
1609 * PLL. No idea how this should be handled if multiple
1610 * DVO outputs are enabled simultaneosly.
1612 dpll |= DPLL_DVO_2X_MODE;
1613 I915_WRITE(DPLL(!crtc->pipe),
1614 I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
1618 * Apparently we need to have VGA mode enabled prior to changing
1619 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
1620 * dividers, even though the register value does change.
1624 I915_WRITE(reg, dpll);
1626 /* Wait for the clocks to stabilize. */
1630 if (INTEL_GEN(dev_priv) >= 4) {
1631 I915_WRITE(DPLL_MD(crtc->pipe),
1632 crtc_state->dpll_hw_state.dpll_md);
1634 /* The pixel multiplier can only be updated once the
1635 * DPLL is enabled and the clocks are stable.
1637 * So write it again.
1639 I915_WRITE(reg, dpll);
1642 /* We do this three times for luck */
1643 for (i = 0; i < 3; i++) {
1644 I915_WRITE(reg, dpll);
1646 udelay(150); /* wait for warmup */
1650 static void i9xx_disable_pll(struct intel_crtc *crtc)
1652 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1653 enum pipe pipe = crtc->pipe;
1655 /* Disable DVO 2x clock on both PLLs if necessary */
1656 if (IS_I830(dev_priv) &&
1657 intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DVO) &&
1658 !intel_num_dvo_pipes(dev_priv)) {
1659 I915_WRITE(DPLL(PIPE_B),
1660 I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
1661 I915_WRITE(DPLL(PIPE_A),
1662 I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
1665 /* Don't disable pipe or pipe PLLs if needed */
1666 if (IS_I830(dev_priv))
1669 /* Make sure the pipe isn't still relying on us */
1670 assert_pipe_disabled(dev_priv, pipe);
1672 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
1673 POSTING_READ(DPLL(pipe));
1676 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1680 /* Make sure the pipe isn't still relying on us */
1681 assert_pipe_disabled(dev_priv, pipe);
1683 val = DPLL_INTEGRATED_REF_CLK_VLV |
1684 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1686 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1688 I915_WRITE(DPLL(pipe), val);
1689 POSTING_READ(DPLL(pipe));
1692 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1694 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1697 /* Make sure the pipe isn't still relying on us */
1698 assert_pipe_disabled(dev_priv, pipe);
1700 val = DPLL_SSC_REF_CLK_CHV |
1701 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1703 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1705 I915_WRITE(DPLL(pipe), val);
1706 POSTING_READ(DPLL(pipe));
1708 mutex_lock(&dev_priv->sb_lock);
1710 /* Disable 10bit clock to display controller */
1711 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1712 val &= ~DPIO_DCLKP_EN;
1713 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1715 mutex_unlock(&dev_priv->sb_lock);
1718 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1719 struct intel_digital_port *dport,
1720 unsigned int expected_mask)
1723 i915_reg_t dpll_reg;
1725 switch (dport->port) {
1727 port_mask = DPLL_PORTB_READY_MASK;
1731 port_mask = DPLL_PORTC_READY_MASK;
1733 expected_mask <<= 4;
1736 port_mask = DPLL_PORTD_READY_MASK;
1737 dpll_reg = DPIO_PHY_STATUS;
1743 if (intel_wait_for_register(dev_priv,
1744 dpll_reg, port_mask, expected_mask,
1746 WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
1747 port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
1750 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1753 struct intel_crtc *intel_crtc = intel_get_crtc_for_pipe(dev_priv,
1756 uint32_t val, pipeconf_val;
1758 /* Make sure PCH DPLL is enabled */
1759 assert_shared_dpll_enabled(dev_priv, intel_crtc->config->shared_dpll);
1761 /* FDI must be feeding us bits for PCH ports */
1762 assert_fdi_tx_enabled(dev_priv, pipe);
1763 assert_fdi_rx_enabled(dev_priv, pipe);
1765 if (HAS_PCH_CPT(dev_priv)) {
1766 /* Workaround: Set the timing override bit before enabling the
1767 * pch transcoder. */
1768 reg = TRANS_CHICKEN2(pipe);
1769 val = I915_READ(reg);
1770 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1771 I915_WRITE(reg, val);
1774 reg = PCH_TRANSCONF(pipe);
1775 val = I915_READ(reg);
1776 pipeconf_val = I915_READ(PIPECONF(pipe));
1778 if (HAS_PCH_IBX(dev_priv)) {
1780 * Make the BPC in transcoder be consistent with
1781 * that in pipeconf reg. For HDMI we must use 8bpc
1782 * here for both 8bpc and 12bpc.
1784 val &= ~PIPECONF_BPC_MASK;
1785 if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_HDMI))
1786 val |= PIPECONF_8BPC;
1788 val |= pipeconf_val & PIPECONF_BPC_MASK;
1791 val &= ~TRANS_INTERLACE_MASK;
1792 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1793 if (HAS_PCH_IBX(dev_priv) &&
1794 intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_SDVO))
1795 val |= TRANS_LEGACY_INTERLACED_ILK;
1797 val |= TRANS_INTERLACED;
1799 val |= TRANS_PROGRESSIVE;
1801 I915_WRITE(reg, val | TRANS_ENABLE);
1802 if (intel_wait_for_register(dev_priv,
1803 reg, TRANS_STATE_ENABLE, TRANS_STATE_ENABLE,
1805 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1808 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1809 enum transcoder cpu_transcoder)
1811 u32 val, pipeconf_val;
1813 /* FDI must be feeding us bits for PCH ports */
1814 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1815 assert_fdi_rx_enabled(dev_priv, PIPE_A);
1817 /* Workaround: set timing override bit. */
1818 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1819 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1820 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1823 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1825 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1826 PIPECONF_INTERLACED_ILK)
1827 val |= TRANS_INTERLACED;
1829 val |= TRANS_PROGRESSIVE;
1831 I915_WRITE(LPT_TRANSCONF, val);
1832 if (intel_wait_for_register(dev_priv,
1837 DRM_ERROR("Failed to enable PCH transcoder\n");
1840 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1846 /* FDI relies on the transcoder */
1847 assert_fdi_tx_disabled(dev_priv, pipe);
1848 assert_fdi_rx_disabled(dev_priv, pipe);
1850 /* Ports must be off as well */
1851 assert_pch_ports_disabled(dev_priv, pipe);
1853 reg = PCH_TRANSCONF(pipe);
1854 val = I915_READ(reg);
1855 val &= ~TRANS_ENABLE;
1856 I915_WRITE(reg, val);
1857 /* wait for PCH transcoder off, transcoder state */
1858 if (intel_wait_for_register(dev_priv,
1859 reg, TRANS_STATE_ENABLE, 0,
1861 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1863 if (HAS_PCH_CPT(dev_priv)) {
1864 /* Workaround: Clear the timing override chicken bit again. */
1865 reg = TRANS_CHICKEN2(pipe);
1866 val = I915_READ(reg);
1867 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1868 I915_WRITE(reg, val);
1872 void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1876 val = I915_READ(LPT_TRANSCONF);
1877 val &= ~TRANS_ENABLE;
1878 I915_WRITE(LPT_TRANSCONF, val);
1879 /* wait for PCH transcoder off, transcoder state */
1880 if (intel_wait_for_register(dev_priv,
1881 LPT_TRANSCONF, TRANS_STATE_ENABLE, 0,
1883 DRM_ERROR("Failed to disable PCH transcoder\n");
1885 /* Workaround: clear timing override bit. */
1886 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1887 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1888 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1891 enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc)
1893 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1895 WARN_ON(!crtc->config->has_pch_encoder);
1897 if (HAS_PCH_LPT(dev_priv))
1904 * intel_enable_pipe - enable a pipe, asserting requirements
1905 * @crtc: crtc responsible for the pipe
1907 * Enable @crtc's pipe, making sure that various hardware specific requirements
1908 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1910 static void intel_enable_pipe(struct intel_crtc *crtc)
1912 struct drm_device *dev = crtc->base.dev;
1913 struct drm_i915_private *dev_priv = to_i915(dev);
1914 enum pipe pipe = crtc->pipe;
1915 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1919 DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
1921 assert_planes_disabled(dev_priv, pipe);
1922 assert_cursor_disabled(dev_priv, pipe);
1923 assert_sprites_disabled(dev_priv, pipe);
1926 * A pipe without a PLL won't actually be able to drive bits from
1927 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1930 if (HAS_GMCH_DISPLAY(dev_priv)) {
1931 if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DSI))
1932 assert_dsi_pll_enabled(dev_priv);
1934 assert_pll_enabled(dev_priv, pipe);
1936 if (crtc->config->has_pch_encoder) {
1937 /* if driving the PCH, we need FDI enabled */
1938 assert_fdi_rx_pll_enabled(dev_priv,
1939 intel_crtc_pch_transcoder(crtc));
1940 assert_fdi_tx_pll_enabled(dev_priv,
1941 (enum pipe) cpu_transcoder);
1943 /* FIXME: assert CPU port conditions for SNB+ */
1946 reg = PIPECONF(cpu_transcoder);
1947 val = I915_READ(reg);
1948 if (val & PIPECONF_ENABLE) {
1949 /* we keep both pipes enabled on 830 */
1950 WARN_ON(!IS_I830(dev_priv));
1954 I915_WRITE(reg, val | PIPECONF_ENABLE);
1958 * Until the pipe starts PIPEDSL reads will return a stale value,
1959 * which causes an apparent vblank timestamp jump when PIPEDSL
1960 * resets to its proper value. That also messes up the frame count
1961 * when it's derived from the timestamps. So let's wait for the
1962 * pipe to start properly before we call drm_crtc_vblank_on()
1964 if (dev->max_vblank_count == 0)
1965 intel_wait_for_pipe_scanline_moving(crtc);
1969 * intel_disable_pipe - disable a pipe, asserting requirements
1970 * @crtc: crtc whose pipes is to be disabled
1972 * Disable the pipe of @crtc, making sure that various hardware
1973 * specific requirements are met, if applicable, e.g. plane
1974 * disabled, panel fitter off, etc.
1976 * Will wait until the pipe has shut down before returning.
1978 static void intel_disable_pipe(struct intel_crtc *crtc)
1980 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1981 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1982 enum pipe pipe = crtc->pipe;
1986 DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
1989 * Make sure planes won't keep trying to pump pixels to us,
1990 * or we might hang the display.
1992 assert_planes_disabled(dev_priv, pipe);
1993 assert_cursor_disabled(dev_priv, pipe);
1994 assert_sprites_disabled(dev_priv, pipe);
1996 reg = PIPECONF(cpu_transcoder);
1997 val = I915_READ(reg);
1998 if ((val & PIPECONF_ENABLE) == 0)
2002 * Double wide has implications for planes
2003 * so best keep it disabled when not needed.
2005 if (crtc->config->double_wide)
2006 val &= ~PIPECONF_DOUBLE_WIDE;
2008 /* Don't disable pipe or pipe PLLs if needed */
2009 if (!IS_I830(dev_priv))
2010 val &= ~PIPECONF_ENABLE;
2012 I915_WRITE(reg, val);
2013 if ((val & PIPECONF_ENABLE) == 0)
2014 intel_wait_for_pipe_off(crtc);
2017 static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
2019 return IS_GEN2(dev_priv) ? 2048 : 4096;
2023 intel_tile_width_bytes(const struct drm_framebuffer *fb, int plane)
2025 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2026 unsigned int cpp = fb->format->cpp[plane];
2028 switch (fb->modifier) {
2029 case DRM_FORMAT_MOD_LINEAR:
2031 case I915_FORMAT_MOD_X_TILED:
2032 if (IS_GEN2(dev_priv))
2036 case I915_FORMAT_MOD_Y_TILED_CCS:
2040 case I915_FORMAT_MOD_Y_TILED:
2041 if (IS_GEN2(dev_priv) || HAS_128_BYTE_Y_TILING(dev_priv))
2045 case I915_FORMAT_MOD_Yf_TILED_CCS:
2049 case I915_FORMAT_MOD_Yf_TILED:
2065 MISSING_CASE(fb->modifier);
2071 intel_tile_height(const struct drm_framebuffer *fb, int plane)
2073 if (fb->modifier == DRM_FORMAT_MOD_LINEAR)
2076 return intel_tile_size(to_i915(fb->dev)) /
2077 intel_tile_width_bytes(fb, plane);
2080 /* Return the tile dimensions in pixel units */
2081 static void intel_tile_dims(const struct drm_framebuffer *fb, int plane,
2082 unsigned int *tile_width,
2083 unsigned int *tile_height)
2085 unsigned int tile_width_bytes = intel_tile_width_bytes(fb, plane);
2086 unsigned int cpp = fb->format->cpp[plane];
2088 *tile_width = tile_width_bytes / cpp;
2089 *tile_height = intel_tile_size(to_i915(fb->dev)) / tile_width_bytes;
2093 intel_fb_align_height(const struct drm_framebuffer *fb,
2094 int plane, unsigned int height)
2096 unsigned int tile_height = intel_tile_height(fb, plane);
2098 return ALIGN(height, tile_height);
2101 unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
2103 unsigned int size = 0;
2106 for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
2107 size += rot_info->plane[i].width * rot_info->plane[i].height;
2113 intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
2114 const struct drm_framebuffer *fb,
2115 unsigned int rotation)
2117 view->type = I915_GGTT_VIEW_NORMAL;
2118 if (drm_rotation_90_or_270(rotation)) {
2119 view->type = I915_GGTT_VIEW_ROTATED;
2120 view->rotated = to_intel_framebuffer(fb)->rot_info;
2124 static unsigned int intel_cursor_alignment(const struct drm_i915_private *dev_priv)
2126 if (IS_I830(dev_priv))
2128 else if (IS_I85X(dev_priv))
2130 else if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
2136 static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
2138 if (INTEL_INFO(dev_priv)->gen >= 9)
2140 else if (IS_I965G(dev_priv) || IS_I965GM(dev_priv) ||
2141 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2143 else if (INTEL_INFO(dev_priv)->gen >= 4)
2149 static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
2152 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2154 /* AUX_DIST needs only 4K alignment */
2158 switch (fb->modifier) {
2159 case DRM_FORMAT_MOD_LINEAR:
2160 return intel_linear_alignment(dev_priv);
2161 case I915_FORMAT_MOD_X_TILED:
2162 if (INTEL_GEN(dev_priv) >= 9)
2165 case I915_FORMAT_MOD_Y_TILED_CCS:
2166 case I915_FORMAT_MOD_Yf_TILED_CCS:
2167 case I915_FORMAT_MOD_Y_TILED:
2168 case I915_FORMAT_MOD_Yf_TILED:
2169 return 1 * 1024 * 1024;
2171 MISSING_CASE(fb->modifier);
2177 intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
2179 struct drm_device *dev = fb->dev;
2180 struct drm_i915_private *dev_priv = to_i915(dev);
2181 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2182 struct i915_ggtt_view view;
2183 struct i915_vma *vma;
2186 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
2188 alignment = intel_surf_alignment(fb, 0);
2190 intel_fill_fb_ggtt_view(&view, fb, rotation);
2192 /* Note that the w/a also requires 64 PTE of padding following the
2193 * bo. We currently fill all unused PTE with the shadow page and so
2194 * we should always have valid PTE following the scanout preventing
2197 if (intel_scanout_needs_vtd_wa(dev_priv) && alignment < 256 * 1024)
2198 alignment = 256 * 1024;
2201 * Global gtt pte registers are special registers which actually forward
2202 * writes to a chunk of system memory. Which means that there is no risk
2203 * that the register values disappear as soon as we call
2204 * intel_runtime_pm_put(), so it is correct to wrap only the
2205 * pin/unpin/fence and not more.
2207 intel_runtime_pm_get(dev_priv);
2209 atomic_inc(&dev_priv->gpu_error.pending_fb_pin);
2211 vma = i915_gem_object_pin_to_display_plane(obj, alignment, &view);
2215 if (i915_vma_is_map_and_fenceable(vma)) {
2216 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2217 * fence, whereas 965+ only requires a fence if using
2218 * framebuffer compression. For simplicity, we always, when
2219 * possible, install a fence as the cost is not that onerous.
2221 * If we fail to fence the tiled scanout, then either the
2222 * modeset will reject the change (which is highly unlikely as
2223 * the affected systems, all but one, do not have unmappable
2224 * space) or we will not be able to enable full powersaving
2225 * techniques (also likely not to apply due to various limits
2226 * FBC and the like impose on the size of the buffer, which
2227 * presumably we violated anyway with this unmappable buffer).
2228 * Anyway, it is presumably better to stumble onwards with
2229 * something and try to run the system in a "less than optimal"
2230 * mode that matches the user configuration.
2232 i915_vma_pin_fence(vma);
2237 atomic_dec(&dev_priv->gpu_error.pending_fb_pin);
2239 intel_runtime_pm_put(dev_priv);
2243 void intel_unpin_fb_vma(struct i915_vma *vma)
2245 lockdep_assert_held(&vma->vm->i915->drm.struct_mutex);
2247 i915_vma_unpin_fence(vma);
2248 i915_gem_object_unpin_from_display_plane(vma);
2252 static int intel_fb_pitch(const struct drm_framebuffer *fb, int plane,
2253 unsigned int rotation)
2255 if (drm_rotation_90_or_270(rotation))
2256 return to_intel_framebuffer(fb)->rotated[plane].pitch;
2258 return fb->pitches[plane];
2262 * Convert the x/y offsets into a linear offset.
2263 * Only valid with 0/180 degree rotation, which is fine since linear
2264 * offset is only used with linear buffers on pre-hsw and tiled buffers
2265 * with gen2/3, and 90/270 degree rotations isn't supported on any of them.
2267 u32 intel_fb_xy_to_linear(int x, int y,
2268 const struct intel_plane_state *state,
2271 const struct drm_framebuffer *fb = state->base.fb;
2272 unsigned int cpp = fb->format->cpp[plane];
2273 unsigned int pitch = fb->pitches[plane];
2275 return y * pitch + x * cpp;
2279 * Add the x/y offsets derived from fb->offsets[] to the user
2280 * specified plane src x/y offsets. The resulting x/y offsets
2281 * specify the start of scanout from the beginning of the gtt mapping.
2283 void intel_add_fb_offsets(int *x, int *y,
2284 const struct intel_plane_state *state,
2288 const struct intel_framebuffer *intel_fb = to_intel_framebuffer(state->base.fb);
2289 unsigned int rotation = state->base.rotation;
2291 if (drm_rotation_90_or_270(rotation)) {
2292 *x += intel_fb->rotated[plane].x;
2293 *y += intel_fb->rotated[plane].y;
2295 *x += intel_fb->normal[plane].x;
2296 *y += intel_fb->normal[plane].y;
2300 static u32 __intel_adjust_tile_offset(int *x, int *y,
2301 unsigned int tile_width,
2302 unsigned int tile_height,
2303 unsigned int tile_size,
2304 unsigned int pitch_tiles,
2308 unsigned int pitch_pixels = pitch_tiles * tile_width;
2311 WARN_ON(old_offset & (tile_size - 1));
2312 WARN_ON(new_offset & (tile_size - 1));
2313 WARN_ON(new_offset > old_offset);
2315 tiles = (old_offset - new_offset) / tile_size;
2317 *y += tiles / pitch_tiles * tile_height;
2318 *x += tiles % pitch_tiles * tile_width;
2320 /* minimize x in case it got needlessly big */
2321 *y += *x / pitch_pixels * tile_height;
2327 static u32 _intel_adjust_tile_offset(int *x, int *y,
2328 const struct drm_framebuffer *fb, int plane,
2329 unsigned int rotation,
2330 u32 old_offset, u32 new_offset)
2332 const struct drm_i915_private *dev_priv = to_i915(fb->dev);
2333 unsigned int cpp = fb->format->cpp[plane];
2334 unsigned int pitch = intel_fb_pitch(fb, plane, rotation);
2336 WARN_ON(new_offset > old_offset);
2338 if (fb->modifier != DRM_FORMAT_MOD_LINEAR) {
2339 unsigned int tile_size, tile_width, tile_height;
2340 unsigned int pitch_tiles;
2342 tile_size = intel_tile_size(dev_priv);
2343 intel_tile_dims(fb, plane, &tile_width, &tile_height);
2345 if (drm_rotation_90_or_270(rotation)) {
2346 pitch_tiles = pitch / tile_height;
2347 swap(tile_width, tile_height);
2349 pitch_tiles = pitch / (tile_width * cpp);
2352 __intel_adjust_tile_offset(x, y, tile_width, tile_height,
2353 tile_size, pitch_tiles,
2354 old_offset, new_offset);
2356 old_offset += *y * pitch + *x * cpp;
2358 *y = (old_offset - new_offset) / pitch;
2359 *x = ((old_offset - new_offset) - *y * pitch) / cpp;
2366 * Adjust the tile offset by moving the difference into
2369 static u32 intel_adjust_tile_offset(int *x, int *y,
2370 const struct intel_plane_state *state, int plane,
2371 u32 old_offset, u32 new_offset)
2373 return _intel_adjust_tile_offset(x, y, state->base.fb, plane,
2374 state->base.rotation,
2375 old_offset, new_offset);
2379 * Computes the linear offset to the base tile and adjusts
2380 * x, y. bytes per pixel is assumed to be a power-of-two.
2382 * In the 90/270 rotated case, x and y are assumed
2383 * to be already rotated to match the rotated GTT view, and
2384 * pitch is the tile_height aligned framebuffer height.
2386 * This function is used when computing the derived information
2387 * under intel_framebuffer, so using any of that information
2388 * here is not allowed. Anything under drm_framebuffer can be
2389 * used. This is why the user has to pass in the pitch since it
2390 * is specified in the rotated orientation.
2392 static u32 _intel_compute_tile_offset(const struct drm_i915_private *dev_priv,
2394 const struct drm_framebuffer *fb, int plane,
2396 unsigned int rotation,
2399 uint64_t fb_modifier = fb->modifier;
2400 unsigned int cpp = fb->format->cpp[plane];
2401 u32 offset, offset_aligned;
2406 if (fb_modifier != DRM_FORMAT_MOD_LINEAR) {
2407 unsigned int tile_size, tile_width, tile_height;
2408 unsigned int tile_rows, tiles, pitch_tiles;
2410 tile_size = intel_tile_size(dev_priv);
2411 intel_tile_dims(fb, plane, &tile_width, &tile_height);
2413 if (drm_rotation_90_or_270(rotation)) {
2414 pitch_tiles = pitch / tile_height;
2415 swap(tile_width, tile_height);
2417 pitch_tiles = pitch / (tile_width * cpp);
2420 tile_rows = *y / tile_height;
2423 tiles = *x / tile_width;
2426 offset = (tile_rows * pitch_tiles + tiles) * tile_size;
2427 offset_aligned = offset & ~alignment;
2429 __intel_adjust_tile_offset(x, y, tile_width, tile_height,
2430 tile_size, pitch_tiles,
2431 offset, offset_aligned);
2433 offset = *y * pitch + *x * cpp;
2434 offset_aligned = offset & ~alignment;
2436 *y = (offset & alignment) / pitch;
2437 *x = ((offset & alignment) - *y * pitch) / cpp;
2440 return offset_aligned;
2443 u32 intel_compute_tile_offset(int *x, int *y,
2444 const struct intel_plane_state *state,
2447 struct intel_plane *intel_plane = to_intel_plane(state->base.plane);
2448 struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
2449 const struct drm_framebuffer *fb = state->base.fb;
2450 unsigned int rotation = state->base.rotation;
2451 int pitch = intel_fb_pitch(fb, plane, rotation);
2454 if (intel_plane->id == PLANE_CURSOR)
2455 alignment = intel_cursor_alignment(dev_priv);
2457 alignment = intel_surf_alignment(fb, plane);
2459 return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
2460 rotation, alignment);
2463 /* Convert the fb->offset[] into x/y offsets */
2464 static int intel_fb_offset_to_xy(int *x, int *y,
2465 const struct drm_framebuffer *fb, int plane)
2467 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2469 if (fb->modifier != DRM_FORMAT_MOD_LINEAR &&
2470 fb->offsets[plane] % intel_tile_size(dev_priv))
2476 _intel_adjust_tile_offset(x, y,
2477 fb, plane, DRM_MODE_ROTATE_0,
2478 fb->offsets[plane], 0);
2483 static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier)
2485 switch (fb_modifier) {
2486 case I915_FORMAT_MOD_X_TILED:
2487 return I915_TILING_X;
2488 case I915_FORMAT_MOD_Y_TILED:
2489 case I915_FORMAT_MOD_Y_TILED_CCS:
2490 return I915_TILING_Y;
2492 return I915_TILING_NONE;
2496 static const struct drm_format_info ccs_formats[] = {
2497 { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
2498 { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
2499 { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
2500 { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
2503 static const struct drm_format_info *
2504 lookup_format_info(const struct drm_format_info formats[],
2505 int num_formats, u32 format)
2509 for (i = 0; i < num_formats; i++) {
2510 if (formats[i].format == format)
2517 static const struct drm_format_info *
2518 intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
2520 switch (cmd->modifier[0]) {
2521 case I915_FORMAT_MOD_Y_TILED_CCS:
2522 case I915_FORMAT_MOD_Yf_TILED_CCS:
2523 return lookup_format_info(ccs_formats,
2524 ARRAY_SIZE(ccs_formats),
2532 intel_fill_fb_info(struct drm_i915_private *dev_priv,
2533 struct drm_framebuffer *fb)
2535 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
2536 struct intel_rotation_info *rot_info = &intel_fb->rot_info;
2537 u32 gtt_offset_rotated = 0;
2538 unsigned int max_size = 0;
2539 int i, num_planes = fb->format->num_planes;
2540 unsigned int tile_size = intel_tile_size(dev_priv);
2542 for (i = 0; i < num_planes; i++) {
2543 unsigned int width, height;
2544 unsigned int cpp, size;
2549 cpp = fb->format->cpp[i];
2550 width = drm_framebuffer_plane_width(fb->width, fb, i);
2551 height = drm_framebuffer_plane_height(fb->height, fb, i);
2553 ret = intel_fb_offset_to_xy(&x, &y, fb, i);
2555 DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",
2560 if ((fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
2561 fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) && i == 1) {
2562 int hsub = fb->format->hsub;
2563 int vsub = fb->format->vsub;
2564 int tile_width, tile_height;
2568 intel_tile_dims(fb, i, &tile_width, &tile_height);
2570 tile_height *= vsub;
2572 ccs_x = (x * hsub) % tile_width;
2573 ccs_y = (y * vsub) % tile_height;
2574 main_x = intel_fb->normal[0].x % tile_width;
2575 main_y = intel_fb->normal[0].y % tile_height;
2578 * CCS doesn't have its own x/y offset register, so the intra CCS tile
2579 * x/y offsets must match between CCS and the main surface.
2581 if (main_x != ccs_x || main_y != ccs_y) {
2582 DRM_DEBUG_KMS("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
2585 intel_fb->normal[0].x,
2586 intel_fb->normal[0].y,
2593 * The fence (if used) is aligned to the start of the object
2594 * so having the framebuffer wrap around across the edge of the
2595 * fenced region doesn't really work. We have no API to configure
2596 * the fence start offset within the object (nor could we probably
2597 * on gen2/3). So it's just easier if we just require that the
2598 * fb layout agrees with the fence layout. We already check that the
2599 * fb stride matches the fence stride elsewhere.
2601 if (i == 0 && i915_gem_object_is_tiled(intel_fb->obj) &&
2602 (x + width) * cpp > fb->pitches[i]) {
2603 DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",
2609 * First pixel of the framebuffer from
2610 * the start of the normal gtt mapping.
2612 intel_fb->normal[i].x = x;
2613 intel_fb->normal[i].y = y;
2615 offset = _intel_compute_tile_offset(dev_priv, &x, &y,
2616 fb, i, fb->pitches[i],
2617 DRM_MODE_ROTATE_0, tile_size);
2618 offset /= tile_size;
2620 if (fb->modifier != DRM_FORMAT_MOD_LINEAR) {
2621 unsigned int tile_width, tile_height;
2622 unsigned int pitch_tiles;
2625 intel_tile_dims(fb, i, &tile_width, &tile_height);
2627 rot_info->plane[i].offset = offset;
2628 rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
2629 rot_info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
2630 rot_info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
2632 intel_fb->rotated[i].pitch =
2633 rot_info->plane[i].height * tile_height;
2635 /* how many tiles does this plane need */
2636 size = rot_info->plane[i].stride * rot_info->plane[i].height;
2638 * If the plane isn't horizontally tile aligned,
2639 * we need one more tile.
2644 /* rotate the x/y offsets to match the GTT view */
2650 rot_info->plane[i].width * tile_width,
2651 rot_info->plane[i].height * tile_height,
2652 DRM_MODE_ROTATE_270);
2656 /* rotate the tile dimensions to match the GTT view */
2657 pitch_tiles = intel_fb->rotated[i].pitch / tile_height;
2658 swap(tile_width, tile_height);
2661 * We only keep the x/y offsets, so push all of the
2662 * gtt offset into the x/y offsets.
2664 __intel_adjust_tile_offset(&x, &y,
2665 tile_width, tile_height,
2666 tile_size, pitch_tiles,
2667 gtt_offset_rotated * tile_size, 0);
2669 gtt_offset_rotated += rot_info->plane[i].width * rot_info->plane[i].height;
2672 * First pixel of the framebuffer from
2673 * the start of the rotated gtt mapping.
2675 intel_fb->rotated[i].x = x;
2676 intel_fb->rotated[i].y = y;
2678 size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
2679 x * cpp, tile_size);
2682 /* how many tiles in total needed in the bo */
2683 max_size = max(max_size, offset + size);
2686 if (max_size * tile_size > intel_fb->obj->base.size) {
2687 DRM_DEBUG_KMS("fb too big for bo (need %u bytes, have %zu bytes)\n",
2688 max_size * tile_size, intel_fb->obj->base.size);
2695 static int i9xx_format_to_fourcc(int format)
2698 case DISPPLANE_8BPP:
2699 return DRM_FORMAT_C8;
2700 case DISPPLANE_BGRX555:
2701 return DRM_FORMAT_XRGB1555;
2702 case DISPPLANE_BGRX565:
2703 return DRM_FORMAT_RGB565;
2705 case DISPPLANE_BGRX888:
2706 return DRM_FORMAT_XRGB8888;
2707 case DISPPLANE_RGBX888:
2708 return DRM_FORMAT_XBGR8888;
2709 case DISPPLANE_BGRX101010:
2710 return DRM_FORMAT_XRGB2101010;
2711 case DISPPLANE_RGBX101010:
2712 return DRM_FORMAT_XBGR2101010;
2716 static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
2719 case PLANE_CTL_FORMAT_RGB_565:
2720 return DRM_FORMAT_RGB565;
2722 case PLANE_CTL_FORMAT_XRGB_8888:
2725 return DRM_FORMAT_ABGR8888;
2727 return DRM_FORMAT_XBGR8888;
2730 return DRM_FORMAT_ARGB8888;
2732 return DRM_FORMAT_XRGB8888;
2734 case PLANE_CTL_FORMAT_XRGB_2101010:
2736 return DRM_FORMAT_XBGR2101010;
2738 return DRM_FORMAT_XRGB2101010;
2743 intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
2744 struct intel_initial_plane_config *plane_config)
2746 struct drm_device *dev = crtc->base.dev;
2747 struct drm_i915_private *dev_priv = to_i915(dev);
2748 struct i915_ggtt *ggtt = &dev_priv->ggtt;
2749 struct drm_i915_gem_object *obj = NULL;
2750 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2751 struct drm_framebuffer *fb = &plane_config->fb->base;
2752 u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
2753 u32 size_aligned = round_up(plane_config->base + plane_config->size,
2756 size_aligned -= base_aligned;
2758 if (plane_config->size == 0)
2761 /* If the FB is too big, just don't use it since fbdev is not very
2762 * important and we should probably use that space with FBC or other
2764 if (size_aligned * 2 > ggtt->stolen_usable_size)
2767 mutex_lock(&dev->struct_mutex);
2768 obj = i915_gem_object_create_stolen_for_preallocated(dev_priv,
2772 mutex_unlock(&dev->struct_mutex);
2776 if (plane_config->tiling == I915_TILING_X)
2777 obj->tiling_and_stride = fb->pitches[0] | I915_TILING_X;
2779 mode_cmd.pixel_format = fb->format->format;
2780 mode_cmd.width = fb->width;
2781 mode_cmd.height = fb->height;
2782 mode_cmd.pitches[0] = fb->pitches[0];
2783 mode_cmd.modifier[0] = fb->modifier;
2784 mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
2786 if (intel_framebuffer_init(to_intel_framebuffer(fb), obj, &mode_cmd)) {
2787 DRM_DEBUG_KMS("intel fb init failed\n");
2792 DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
2796 i915_gem_object_put(obj);
2801 intel_set_plane_visible(struct intel_crtc_state *crtc_state,
2802 struct intel_plane_state *plane_state,
2805 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
2807 plane_state->base.visible = visible;
2809 /* FIXME pre-g4x don't work like this */
2811 crtc_state->base.plane_mask |= BIT(drm_plane_index(&plane->base));
2812 crtc_state->active_planes |= BIT(plane->id);
2814 crtc_state->base.plane_mask &= ~BIT(drm_plane_index(&plane->base));
2815 crtc_state->active_planes &= ~BIT(plane->id);
2818 DRM_DEBUG_KMS("%s active planes 0x%x\n",
2819 crtc_state->base.crtc->name,
2820 crtc_state->active_planes);
2824 intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
2825 struct intel_initial_plane_config *plane_config)
2827 struct drm_device *dev = intel_crtc->base.dev;
2828 struct drm_i915_private *dev_priv = to_i915(dev);
2830 struct drm_i915_gem_object *obj;
2831 struct drm_plane *primary = intel_crtc->base.primary;
2832 struct drm_plane_state *plane_state = primary->state;
2833 struct drm_crtc_state *crtc_state = intel_crtc->base.state;
2834 struct intel_plane *intel_plane = to_intel_plane(primary);
2835 struct intel_plane_state *intel_state =
2836 to_intel_plane_state(plane_state);
2837 struct drm_framebuffer *fb;
2839 if (!plane_config->fb)
2842 if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
2843 fb = &plane_config->fb->base;
2847 kfree(plane_config->fb);
2850 * Failed to alloc the obj, check to see if we should share
2851 * an fb with another CRTC instead
2853 for_each_crtc(dev, c) {
2854 struct intel_plane_state *state;
2856 if (c == &intel_crtc->base)
2859 if (!to_intel_crtc(c)->active)
2862 state = to_intel_plane_state(c->primary->state);
2866 if (intel_plane_ggtt_offset(state) == plane_config->base) {
2867 fb = c->primary->fb;
2868 drm_framebuffer_get(fb);
2874 * We've failed to reconstruct the BIOS FB. Current display state
2875 * indicates that the primary plane is visible, but has a NULL FB,
2876 * which will lead to problems later if we don't fix it up. The
2877 * simplest solution is to just disable the primary plane now and
2878 * pretend the BIOS never had it enabled.
2880 intel_set_plane_visible(to_intel_crtc_state(crtc_state),
2881 to_intel_plane_state(plane_state),
2883 intel_pre_disable_primary_noatomic(&intel_crtc->base);
2884 trace_intel_disable_plane(primary, intel_crtc);
2885 intel_plane->disable_plane(intel_plane, intel_crtc);
2890 mutex_lock(&dev->struct_mutex);
2892 intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
2893 mutex_unlock(&dev->struct_mutex);
2894 if (IS_ERR(intel_state->vma)) {
2895 DRM_ERROR("failed to pin boot fb on pipe %d: %li\n",
2896 intel_crtc->pipe, PTR_ERR(intel_state->vma));
2898 intel_state->vma = NULL;
2899 drm_framebuffer_put(fb);
2903 plane_state->src_x = 0;
2904 plane_state->src_y = 0;
2905 plane_state->src_w = fb->width << 16;
2906 plane_state->src_h = fb->height << 16;
2908 plane_state->crtc_x = 0;
2909 plane_state->crtc_y = 0;
2910 plane_state->crtc_w = fb->width;
2911 plane_state->crtc_h = fb->height;
2913 intel_state->base.src = drm_plane_state_src(plane_state);
2914 intel_state->base.dst = drm_plane_state_dest(plane_state);
2916 obj = intel_fb_obj(fb);
2917 if (i915_gem_object_is_tiled(obj))
2918 dev_priv->preserve_bios_swizzle = true;
2920 drm_framebuffer_get(fb);
2921 primary->fb = primary->state->fb = fb;
2922 primary->crtc = primary->state->crtc = &intel_crtc->base;
2924 intel_set_plane_visible(to_intel_crtc_state(crtc_state),
2925 to_intel_plane_state(plane_state),
2928 atomic_or(to_intel_plane(primary)->frontbuffer_bit,
2929 &obj->frontbuffer_bits);
2932 static int skl_max_plane_width(const struct drm_framebuffer *fb, int plane,
2933 unsigned int rotation)
2935 int cpp = fb->format->cpp[plane];
2937 switch (fb->modifier) {
2938 case DRM_FORMAT_MOD_LINEAR:
2939 case I915_FORMAT_MOD_X_TILED:
2952 case I915_FORMAT_MOD_Y_TILED_CCS:
2953 case I915_FORMAT_MOD_Yf_TILED_CCS:
2954 /* FIXME AUX plane? */
2955 case I915_FORMAT_MOD_Y_TILED:
2956 case I915_FORMAT_MOD_Yf_TILED:
2971 MISSING_CASE(fb->modifier);
2977 static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
2978 int main_x, int main_y, u32 main_offset)
2980 const struct drm_framebuffer *fb = plane_state->base.fb;
2981 int hsub = fb->format->hsub;
2982 int vsub = fb->format->vsub;
2983 int aux_x = plane_state->aux.x;
2984 int aux_y = plane_state->aux.y;
2985 u32 aux_offset = plane_state->aux.offset;
2986 u32 alignment = intel_surf_alignment(fb, 1);
2988 while (aux_offset >= main_offset && aux_y <= main_y) {
2991 if (aux_x == main_x && aux_y == main_y)
2994 if (aux_offset == 0)
2999 aux_offset = intel_adjust_tile_offset(&x, &y, plane_state, 1,
3000 aux_offset, aux_offset - alignment);
3001 aux_x = x * hsub + aux_x % hsub;
3002 aux_y = y * vsub + aux_y % vsub;
3005 if (aux_x != main_x || aux_y != main_y)
3008 plane_state->aux.offset = aux_offset;
3009 plane_state->aux.x = aux_x;
3010 plane_state->aux.y = aux_y;
3015 static int skl_check_main_surface(struct intel_plane_state *plane_state)
3017 const struct drm_framebuffer *fb = plane_state->base.fb;
3018 unsigned int rotation = plane_state->base.rotation;
3019 int x = plane_state->base.src.x1 >> 16;
3020 int y = plane_state->base.src.y1 >> 16;
3021 int w = drm_rect_width(&plane_state->base.src) >> 16;
3022 int h = drm_rect_height(&plane_state->base.src) >> 16;
3023 int max_width = skl_max_plane_width(fb, 0, rotation);
3024 int max_height = 4096;
3025 u32 alignment, offset, aux_offset = plane_state->aux.offset;
3027 if (w > max_width || h > max_height) {
3028 DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
3029 w, h, max_width, max_height);
3033 intel_add_fb_offsets(&x, &y, plane_state, 0);
3034 offset = intel_compute_tile_offset(&x, &y, plane_state, 0);
3035 alignment = intel_surf_alignment(fb, 0);
3038 * AUX surface offset is specified as the distance from the
3039 * main surface offset, and it must be non-negative. Make
3040 * sure that is what we will get.
3042 if (offset > aux_offset)
3043 offset = intel_adjust_tile_offset(&x, &y, plane_state, 0,
3044 offset, aux_offset & ~(alignment - 1));
3047 * When using an X-tiled surface, the plane blows up
3048 * if the x offset + width exceed the stride.
3050 * TODO: linear and Y-tiled seem fine, Yf untested,
3052 if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
3053 int cpp = fb->format->cpp[0];
3055 while ((x + w) * cpp > fb->pitches[0]) {
3057 DRM_DEBUG_KMS("Unable to find suitable display surface offset due to X-tiling\n");
3061 offset = intel_adjust_tile_offset(&x, &y, plane_state, 0,
3062 offset, offset - alignment);
3067 * CCS AUX surface doesn't have its own x/y offsets, we must make sure
3068 * they match with the main surface x/y offsets.
3070 if (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
3071 fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) {
3072 while (!skl_check_main_ccs_coordinates(plane_state, x, y, offset)) {
3076 offset = intel_adjust_tile_offset(&x, &y, plane_state, 0,
3077 offset, offset - alignment);
3080 if (x != plane_state->aux.x || y != plane_state->aux.y) {
3081 DRM_DEBUG_KMS("Unable to find suitable display surface offset due to CCS\n");
3086 plane_state->main.offset = offset;
3087 plane_state->main.x = x;
3088 plane_state->main.y = y;
3093 static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
3095 const struct drm_framebuffer *fb = plane_state->base.fb;
3096 unsigned int rotation = plane_state->base.rotation;
3097 int max_width = skl_max_plane_width(fb, 1, rotation);
3098 int max_height = 4096;
3099 int x = plane_state->base.src.x1 >> 17;
3100 int y = plane_state->base.src.y1 >> 17;
3101 int w = drm_rect_width(&plane_state->base.src) >> 17;
3102 int h = drm_rect_height(&plane_state->base.src) >> 17;
3105 intel_add_fb_offsets(&x, &y, plane_state, 1);
3106 offset = intel_compute_tile_offset(&x, &y, plane_state, 1);
3108 /* FIXME not quite sure how/if these apply to the chroma plane */
3109 if (w > max_width || h > max_height) {
3110 DRM_DEBUG_KMS("CbCr source size %dx%d too big (limit %dx%d)\n",
3111 w, h, max_width, max_height);
3115 plane_state->aux.offset = offset;
3116 plane_state->aux.x = x;
3117 plane_state->aux.y = y;
3122 static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)
3124 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
3125 struct intel_crtc *crtc = to_intel_crtc(plane_state->base.crtc);
3126 const struct drm_framebuffer *fb = plane_state->base.fb;
3127 int src_x = plane_state->base.src.x1 >> 16;
3128 int src_y = plane_state->base.src.y1 >> 16;
3129 int hsub = fb->format->hsub;
3130 int vsub = fb->format->vsub;
3131 int x = src_x / hsub;
3132 int y = src_y / vsub;
3135 switch (plane->id) {
3140 DRM_DEBUG_KMS("RC support only on plane 1 and 2\n");
3144 if (crtc->pipe == PIPE_C) {
3145 DRM_DEBUG_KMS("No RC support on pipe C\n");
3149 if (plane_state->base.rotation & ~(DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180)) {
3150 DRM_DEBUG_KMS("RC support only with 0/180 degree rotation %x\n",
3151 plane_state->base.rotation);
3155 intel_add_fb_offsets(&x, &y, plane_state, 1);
3156 offset = intel_compute_tile_offset(&x, &y, plane_state, 1);
3158 plane_state->aux.offset = offset;
3159 plane_state->aux.x = x * hsub + src_x % hsub;
3160 plane_state->aux.y = y * vsub + src_y % vsub;
3165 int skl_check_plane_surface(struct intel_plane_state *plane_state)
3167 const struct drm_framebuffer *fb = plane_state->base.fb;
3168 unsigned int rotation = plane_state->base.rotation;
3171 if (!plane_state->base.visible)
3174 /* Rotate src coordinates to match rotated GTT view */
3175 if (drm_rotation_90_or_270(rotation))
3176 drm_rect_rotate(&plane_state->base.src,
3177 fb->width << 16, fb->height << 16,
3178 DRM_MODE_ROTATE_270);
3181 * Handle the AUX surface first since
3182 * the main surface setup depends on it.
3184 if (fb->format->format == DRM_FORMAT_NV12) {
3185 ret = skl_check_nv12_aux_surface(plane_state);
3188 } else if (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
3189 fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) {
3190 ret = skl_check_ccs_aux_surface(plane_state);
3194 plane_state->aux.offset = ~0xfff;
3195 plane_state->aux.x = 0;
3196 plane_state->aux.y = 0;
3199 ret = skl_check_main_surface(plane_state);
3206 static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,
3207 const struct intel_plane_state *plane_state)
3209 struct drm_i915_private *dev_priv =
3210 to_i915(plane_state->base.plane->dev);
3211 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
3212 const struct drm_framebuffer *fb = plane_state->base.fb;
3213 unsigned int rotation = plane_state->base.rotation;
3216 dspcntr = DISPLAY_PLANE_ENABLE | DISPPLANE_GAMMA_ENABLE;
3218 if (IS_G4X(dev_priv) || IS_GEN5(dev_priv) ||
3219 IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv))
3220 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
3222 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
3223 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
3225 if (INTEL_GEN(dev_priv) < 4)
3226 dspcntr |= DISPPLANE_SEL_PIPE(crtc->pipe);
3228 switch (fb->format->format) {
3230 dspcntr |= DISPPLANE_8BPP;
3232 case DRM_FORMAT_XRGB1555:
3233 dspcntr |= DISPPLANE_BGRX555;
3235 case DRM_FORMAT_RGB565:
3236 dspcntr |= DISPPLANE_BGRX565;
3238 case DRM_FORMAT_XRGB8888:
3239 dspcntr |= DISPPLANE_BGRX888;
3241 case DRM_FORMAT_XBGR8888:
3242 dspcntr |= DISPPLANE_RGBX888;
3244 case DRM_FORMAT_XRGB2101010:
3245 dspcntr |= DISPPLANE_BGRX101010;
3247 case DRM_FORMAT_XBGR2101010:
3248 dspcntr |= DISPPLANE_RGBX101010;
3251 MISSING_CASE(fb->format->format);
3255 if (INTEL_GEN(dev_priv) >= 4 &&
3256 fb->modifier == I915_FORMAT_MOD_X_TILED)
3257 dspcntr |= DISPPLANE_TILED;
3259 if (rotation & DRM_MODE_ROTATE_180)
3260 dspcntr |= DISPPLANE_ROTATE_180;
3262 if (rotation & DRM_MODE_REFLECT_X)
3263 dspcntr |= DISPPLANE_MIRROR;
3268 int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
3270 struct drm_i915_private *dev_priv =
3271 to_i915(plane_state->base.plane->dev);
3272 int src_x = plane_state->base.src.x1 >> 16;
3273 int src_y = plane_state->base.src.y1 >> 16;
3276 intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
3278 if (INTEL_GEN(dev_priv) >= 4)
3279 offset = intel_compute_tile_offset(&src_x, &src_y,
3284 /* HSW/BDW do this automagically in hardware */
3285 if (!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)) {
3286 unsigned int rotation = plane_state->base.rotation;
3287 int src_w = drm_rect_width(&plane_state->base.src) >> 16;
3288 int src_h = drm_rect_height(&plane_state->base.src) >> 16;
3290 if (rotation & DRM_MODE_ROTATE_180) {
3293 } else if (rotation & DRM_MODE_REFLECT_X) {
3298 plane_state->main.offset = offset;
3299 plane_state->main.x = src_x;
3300 plane_state->main.y = src_y;
3305 static void i9xx_update_primary_plane(struct intel_plane *primary,
3306 const struct intel_crtc_state *crtc_state,
3307 const struct intel_plane_state *plane_state)
3309 struct drm_i915_private *dev_priv = to_i915(primary->base.dev);
3310 const struct drm_framebuffer *fb = plane_state->base.fb;
3311 enum plane plane = primary->plane;
3313 u32 dspcntr = plane_state->ctl;
3314 i915_reg_t reg = DSPCNTR(plane);
3315 int x = plane_state->main.x;
3316 int y = plane_state->main.y;
3317 unsigned long irqflags;
3320 linear_offset = intel_fb_xy_to_linear(x, y, plane_state, 0);
3322 if (INTEL_GEN(dev_priv) >= 4)
3323 dspaddr_offset = plane_state->main.offset;
3325 dspaddr_offset = linear_offset;
3327 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
3329 if (INTEL_GEN(dev_priv) < 4) {
3330 /* pipesrc and dspsize control the size that is scaled from,
3331 * which should always be the user's requested size.
3333 I915_WRITE_FW(DSPSIZE(plane),
3334 ((crtc_state->pipe_src_h - 1) << 16) |
3335 (crtc_state->pipe_src_w - 1));
3336 I915_WRITE_FW(DSPPOS(plane), 0);
3337 } else if (IS_CHERRYVIEW(dev_priv) && plane == PLANE_B) {
3338 I915_WRITE_FW(PRIMSIZE(plane),
3339 ((crtc_state->pipe_src_h - 1) << 16) |
3340 (crtc_state->pipe_src_w - 1));
3341 I915_WRITE_FW(PRIMPOS(plane), 0);
3342 I915_WRITE_FW(PRIMCNSTALPHA(plane), 0);
3345 I915_WRITE_FW(reg, dspcntr);
3347 I915_WRITE_FW(DSPSTRIDE(plane), fb->pitches[0]);
3348 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
3349 I915_WRITE_FW(DSPSURF(plane),
3350 intel_plane_ggtt_offset(plane_state) +
3352 I915_WRITE_FW(DSPOFFSET(plane), (y << 16) | x);
3353 } else if (INTEL_GEN(dev_priv) >= 4) {
3354 I915_WRITE_FW(DSPSURF(plane),
3355 intel_plane_ggtt_offset(plane_state) +
3357 I915_WRITE_FW(DSPTILEOFF(plane), (y << 16) | x);
3358 I915_WRITE_FW(DSPLINOFF(plane), linear_offset);
3360 I915_WRITE_FW(DSPADDR(plane),
3361 intel_plane_ggtt_offset(plane_state) +
3364 POSTING_READ_FW(reg);
3366 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
3369 static void i9xx_disable_primary_plane(struct intel_plane *primary,
3370 struct intel_crtc *crtc)
3372 struct drm_i915_private *dev_priv = to_i915(primary->base.dev);
3373 enum plane plane = primary->plane;
3374 unsigned long irqflags;
3376 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
3378 I915_WRITE_FW(DSPCNTR(plane), 0);
3379 if (INTEL_INFO(dev_priv)->gen >= 4)
3380 I915_WRITE_FW(DSPSURF(plane), 0);
3382 I915_WRITE_FW(DSPADDR(plane), 0);
3383 POSTING_READ_FW(DSPCNTR(plane));
3385 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
3389 intel_fb_stride_alignment(const struct drm_framebuffer *fb, int plane)
3391 if (fb->modifier == DRM_FORMAT_MOD_LINEAR)
3394 return intel_tile_width_bytes(fb, plane);
3397 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
3399 struct drm_device *dev = intel_crtc->base.dev;
3400 struct drm_i915_private *dev_priv = to_i915(dev);
3402 I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
3403 I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
3404 I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
3408 * This function detaches (aka. unbinds) unused scalers in hardware
3410 static void skl_detach_scalers(struct intel_crtc *intel_crtc)
3412 struct intel_crtc_scaler_state *scaler_state;
3415 scaler_state = &intel_crtc->config->scaler_state;
3417 /* loop through and disable scalers that aren't in use */
3418 for (i = 0; i < intel_crtc->num_scalers; i++) {
3419 if (!scaler_state->scalers[i].in_use)
3420 skl_detach_scaler(intel_crtc, i);
3424 u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
3425 unsigned int rotation)
3429 if (plane >= fb->format->num_planes)
3432 stride = intel_fb_pitch(fb, plane, rotation);
3435 * The stride is either expressed as a multiple of 64 bytes chunks for
3436 * linear buffers or in number of tiles for tiled buffers.
3438 if (drm_rotation_90_or_270(rotation))
3439 stride /= intel_tile_height(fb, plane);
3441 stride /= intel_fb_stride_alignment(fb, plane);
3446 static u32 skl_plane_ctl_format(uint32_t pixel_format)
3448 switch (pixel_format) {
3450 return PLANE_CTL_FORMAT_INDEXED;
3451 case DRM_FORMAT_RGB565:
3452 return PLANE_CTL_FORMAT_RGB_565;
3453 case DRM_FORMAT_XBGR8888:
3454 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
3455 case DRM_FORMAT_XRGB8888:
3456 return PLANE_CTL_FORMAT_XRGB_8888;
3458 * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
3459 * to be already pre-multiplied. We need to add a knob (or a different
3460 * DRM_FORMAT) for user-space to configure that.
3462 case DRM_FORMAT_ABGR8888:
3463 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
3464 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
3465 case DRM_FORMAT_ARGB8888:
3466 return PLANE_CTL_FORMAT_XRGB_8888 |
3467 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
3468 case DRM_FORMAT_XRGB2101010:
3469 return PLANE_CTL_FORMAT_XRGB_2101010;
3470 case DRM_FORMAT_XBGR2101010:
3471 return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
3472 case DRM_FORMAT_YUYV:
3473 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
3474 case DRM_FORMAT_YVYU:
3475 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
3476 case DRM_FORMAT_UYVY:
3477 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
3478 case DRM_FORMAT_VYUY:
3479 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
3481 MISSING_CASE(pixel_format);
3487 static u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
3489 switch (fb_modifier) {
3490 case DRM_FORMAT_MOD_LINEAR:
3492 case I915_FORMAT_MOD_X_TILED:
3493 return PLANE_CTL_TILED_X;
3494 case I915_FORMAT_MOD_Y_TILED:
3495 return PLANE_CTL_TILED_Y;
3496 case I915_FORMAT_MOD_Y_TILED_CCS:
3497 return PLANE_CTL_TILED_Y | PLANE_CTL_DECOMPRESSION_ENABLE;
3498 case I915_FORMAT_MOD_Yf_TILED:
3499 return PLANE_CTL_TILED_YF;
3500 case I915_FORMAT_MOD_Yf_TILED_CCS:
3501 return PLANE_CTL_TILED_YF | PLANE_CTL_DECOMPRESSION_ENABLE;
3503 MISSING_CASE(fb_modifier);
3509 static u32 skl_plane_ctl_rotation(unsigned int rotation)
3512 case DRM_MODE_ROTATE_0:
3515 * DRM_MODE_ROTATE_ is counter clockwise to stay compatible with Xrandr
3516 * while i915 HW rotation is clockwise, thats why this swapping.
3518 case DRM_MODE_ROTATE_90:
3519 return PLANE_CTL_ROTATE_270;
3520 case DRM_MODE_ROTATE_180:
3521 return PLANE_CTL_ROTATE_180;
3522 case DRM_MODE_ROTATE_270:
3523 return PLANE_CTL_ROTATE_90;
3525 MISSING_CASE(rotation);
3531 u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
3532 const struct intel_plane_state *plane_state)
3534 struct drm_i915_private *dev_priv =
3535 to_i915(plane_state->base.plane->dev);
3536 const struct drm_framebuffer *fb = plane_state->base.fb;
3537 unsigned int rotation = plane_state->base.rotation;
3538 const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
3541 plane_ctl = PLANE_CTL_ENABLE;
3543 if (!IS_GEMINILAKE(dev_priv) && !IS_CANNONLAKE(dev_priv)) {
3545 PLANE_CTL_PIPE_GAMMA_ENABLE |
3546 PLANE_CTL_PIPE_CSC_ENABLE |
3547 PLANE_CTL_PLANE_GAMMA_DISABLE;
3550 plane_ctl |= skl_plane_ctl_format(fb->format->format);
3551 plane_ctl |= skl_plane_ctl_tiling(fb->modifier);
3552 plane_ctl |= skl_plane_ctl_rotation(rotation);
3554 if (key->flags & I915_SET_COLORKEY_DESTINATION)
3555 plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
3556 else if (key->flags & I915_SET_COLORKEY_SOURCE)
3557 plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
3563 __intel_display_resume(struct drm_device *dev,
3564 struct drm_atomic_state *state,
3565 struct drm_modeset_acquire_ctx *ctx)
3567 struct drm_crtc_state *crtc_state;
3568 struct drm_crtc *crtc;
3571 intel_modeset_setup_hw_state(dev, ctx);
3572 i915_redisable_vga(to_i915(dev));
3578 * We've duplicated the state, pointers to the old state are invalid.
3580 * Don't attempt to use the old state until we commit the duplicated state.
3582 for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
3584 * Force recalculation even if we restore
3585 * current state. With fast modeset this may not result
3586 * in a modeset when the state is compatible.
3588 crtc_state->mode_changed = true;
3591 /* ignore any reset values/BIOS leftovers in the WM registers */
3592 if (!HAS_GMCH_DISPLAY(to_i915(dev)))
3593 to_intel_atomic_state(state)->skip_intermediate_wm = true;
3595 ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
3597 WARN_ON(ret == -EDEADLK);
3601 static bool gpu_reset_clobbers_display(struct drm_i915_private *dev_priv)
3603 return intel_has_gpu_reset(dev_priv) &&
3604 INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv);
3607 void intel_prepare_reset(struct drm_i915_private *dev_priv)
3609 struct drm_device *dev = &dev_priv->drm;
3610 struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx;
3611 struct drm_atomic_state *state;
3615 /* reset doesn't touch the display */
3616 if (!i915_modparams.force_reset_modeset_test &&
3617 !gpu_reset_clobbers_display(dev_priv))
3620 /* We have a modeset vs reset deadlock, defensively unbreak it. */
3621 set_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags);
3622 wake_up_all(&dev_priv->gpu_error.wait_queue);
3624 if (atomic_read(&dev_priv->gpu_error.pending_fb_pin)) {
3625 DRM_DEBUG_KMS("Modeset potentially stuck, unbreaking through wedging\n");
3626 i915_gem_set_wedged(dev_priv);
3630 * Need mode_config.mutex so that we don't
3631 * trample ongoing ->detect() and whatnot.
3633 mutex_lock(&dev->mode_config.mutex);
3634 drm_modeset_acquire_init(ctx, 0);
3636 ret = drm_modeset_lock_all_ctx(dev, ctx);
3637 if (ret != -EDEADLK)
3640 drm_modeset_backoff(ctx);
3643 * Disabling the crtcs gracefully seems nicer. Also the
3644 * g33 docs say we should at least disable all the planes.
3646 state = drm_atomic_helper_duplicate_state(dev, ctx);
3647 if (IS_ERR(state)) {
3648 ret = PTR_ERR(state);
3649 DRM_ERROR("Duplicating state failed with %i\n", ret);
3653 ret = drm_atomic_helper_disable_all(dev, ctx);
3655 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
3656 drm_atomic_state_put(state);
3660 dev_priv->modeset_restore_state = state;
3661 state->acquire_ctx = ctx;
3664 void intel_finish_reset(struct drm_i915_private *dev_priv)
3666 struct drm_device *dev = &dev_priv->drm;
3667 struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx;
3668 struct drm_atomic_state *state = dev_priv->modeset_restore_state;
3671 /* reset doesn't touch the display */
3672 if (!i915_modparams.force_reset_modeset_test &&
3673 !gpu_reset_clobbers_display(dev_priv))
3679 dev_priv->modeset_restore_state = NULL;
3681 /* reset doesn't touch the display */
3682 if (!gpu_reset_clobbers_display(dev_priv)) {
3683 /* for testing only restore the display */
3684 ret = __intel_display_resume(dev, state, ctx);
3686 DRM_ERROR("Restoring old state failed with %i\n", ret);
3689 * The display has been reset as well,
3690 * so need a full re-initialization.
3692 intel_runtime_pm_disable_interrupts(dev_priv);
3693 intel_runtime_pm_enable_interrupts(dev_priv);
3695 intel_pps_unlock_regs_wa(dev_priv);
3696 intel_modeset_init_hw(dev);
3697 intel_init_clock_gating(dev_priv);
3699 spin_lock_irq(&dev_priv->irq_lock);
3700 if (dev_priv->display.hpd_irq_setup)
3701 dev_priv->display.hpd_irq_setup(dev_priv);
3702 spin_unlock_irq(&dev_priv->irq_lock);
3704 ret = __intel_display_resume(dev, state, ctx);
3706 DRM_ERROR("Restoring old state failed with %i\n", ret);
3708 intel_hpd_init(dev_priv);
3711 drm_atomic_state_put(state);
3713 drm_modeset_drop_locks(ctx);
3714 drm_modeset_acquire_fini(ctx);
3715 mutex_unlock(&dev->mode_config.mutex);
3717 clear_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags);
3720 static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
3721 const struct intel_crtc_state *new_crtc_state)
3723 struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
3724 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
3726 /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
3727 crtc->base.mode = new_crtc_state->base.mode;
3730 * Update pipe size and adjust fitter if needed: the reason for this is
3731 * that in compute_mode_changes we check the native mode (not the pfit
3732 * mode) to see if we can flip rather than do a full mode set. In the
3733 * fastboot case, we'll flip, but if we don't update the pipesrc and
3734 * pfit state, we'll end up with a big fb scanned out into the wrong
3738 I915_WRITE(PIPESRC(crtc->pipe),
3739 ((new_crtc_state->pipe_src_w - 1) << 16) |
3740 (new_crtc_state->pipe_src_h - 1));
3742 /* on skylake this is done by detaching scalers */
3743 if (INTEL_GEN(dev_priv) >= 9) {
3744 skl_detach_scalers(crtc);
3746 if (new_crtc_state->pch_pfit.enabled)
3747 skylake_pfit_enable(crtc);
3748 } else if (HAS_PCH_SPLIT(dev_priv)) {
3749 if (new_crtc_state->pch_pfit.enabled)
3750 ironlake_pfit_enable(crtc);
3751 else if (old_crtc_state->pch_pfit.enabled)
3752 ironlake_pfit_disable(crtc, true);
3756 static void intel_fdi_normal_train(struct intel_crtc *crtc)
3758 struct drm_device *dev = crtc->base.dev;
3759 struct drm_i915_private *dev_priv = to_i915(dev);
3760 int pipe = crtc->pipe;
3764 /* enable normal train */
3765 reg = FDI_TX_CTL(pipe);
3766 temp = I915_READ(reg);
3767 if (IS_IVYBRIDGE(dev_priv)) {
3768 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3769 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
3771 temp &= ~FDI_LINK_TRAIN_NONE;
3772 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
3774 I915_WRITE(reg, temp);
3776 reg = FDI_RX_CTL(pipe);
3777 temp = I915_READ(reg);
3778 if (HAS_PCH_CPT(dev_priv)) {
3779 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3780 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
3782 temp &= ~FDI_LINK_TRAIN_NONE;
3783 temp |= FDI_LINK_TRAIN_NONE;
3785 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
3787 /* wait one idle pattern time */
3791 /* IVB wants error correction enabled */
3792 if (IS_IVYBRIDGE(dev_priv))
3793 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
3794 FDI_FE_ERRC_ENABLE);
3797 /* The FDI link training functions for ILK/Ibexpeak. */
3798 static void ironlake_fdi_link_train(struct intel_crtc *crtc,
3799 const struct intel_crtc_state *crtc_state)
3801 struct drm_device *dev = crtc->base.dev;
3802 struct drm_i915_private *dev_priv = to_i915(dev);
3803 int pipe = crtc->pipe;
3807 /* FDI needs bits from pipe first */
3808 assert_pipe_enabled(dev_priv, pipe);
3810 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3812 reg = FDI_RX_IMR(pipe);
3813 temp = I915_READ(reg);
3814 temp &= ~FDI_RX_SYMBOL_LOCK;
3815 temp &= ~FDI_RX_BIT_LOCK;
3816 I915_WRITE(reg, temp);
3820 /* enable CPU FDI TX and PCH FDI RX */
3821 reg = FDI_TX_CTL(pipe);
3822 temp = I915_READ(reg);
3823 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3824 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
3825 temp &= ~FDI_LINK_TRAIN_NONE;
3826 temp |= FDI_LINK_TRAIN_PATTERN_1;
3827 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3829 reg = FDI_RX_CTL(pipe);
3830 temp = I915_READ(reg);
3831 temp &= ~FDI_LINK_TRAIN_NONE;
3832 temp |= FDI_LINK_TRAIN_PATTERN_1;
3833 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3838 /* Ironlake workaround, enable clock pointer after FDI enable*/
3839 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3840 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
3841 FDI_RX_PHASE_SYNC_POINTER_EN);
3843 reg = FDI_RX_IIR(pipe);
3844 for (tries = 0; tries < 5; tries++) {
3845 temp = I915_READ(reg);
3846 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3848 if ((temp & FDI_RX_BIT_LOCK)) {
3849 DRM_DEBUG_KMS("FDI train 1 done.\n");
3850 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3855 DRM_ERROR("FDI train 1 fail!\n");
3858 reg = FDI_TX_CTL(pipe);
3859 temp = I915_READ(reg);
3860 temp &= ~FDI_LINK_TRAIN_NONE;
3861 temp |= FDI_LINK_TRAIN_PATTERN_2;
3862 I915_WRITE(reg, temp);
3864 reg = FDI_RX_CTL(pipe);
3865 temp = I915_READ(reg);
3866 temp &= ~FDI_LINK_TRAIN_NONE;
3867 temp |= FDI_LINK_TRAIN_PATTERN_2;
3868 I915_WRITE(reg, temp);
3873 reg = FDI_RX_IIR(pipe);
3874 for (tries = 0; tries < 5; tries++) {
3875 temp = I915_READ(reg);
3876 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3878 if (temp & FDI_RX_SYMBOL_LOCK) {
3879 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3880 DRM_DEBUG_KMS("FDI train 2 done.\n");
3885 DRM_ERROR("FDI train 2 fail!\n");
3887 DRM_DEBUG_KMS("FDI train done\n");
3891 static const int snb_b_fdi_train_param[] = {
3892 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
3893 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
3894 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
3895 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
3898 /* The FDI link training functions for SNB/Cougarpoint. */
3899 static void gen6_fdi_link_train(struct intel_crtc *crtc,
3900 const struct intel_crtc_state *crtc_state)
3902 struct drm_device *dev = crtc->base.dev;
3903 struct drm_i915_private *dev_priv = to_i915(dev);
3904 int pipe = crtc->pipe;
3908 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3910 reg = FDI_RX_IMR(pipe);
3911 temp = I915_READ(reg);
3912 temp &= ~FDI_RX_SYMBOL_LOCK;
3913 temp &= ~FDI_RX_BIT_LOCK;
3914 I915_WRITE(reg, temp);
3919 /* enable CPU FDI TX and PCH FDI RX */
3920 reg = FDI_TX_CTL(pipe);
3921 temp = I915_READ(reg);
3922 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3923 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
3924 temp &= ~FDI_LINK_TRAIN_NONE;
3925 temp |= FDI_LINK_TRAIN_PATTERN_1;
3926 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3928 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3929 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3931 I915_WRITE(FDI_RX_MISC(pipe),
3932 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3934 reg = FDI_RX_CTL(pipe);
3935 temp = I915_READ(reg);
3936 if (HAS_PCH_CPT(dev_priv)) {
3937 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3938 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3940 temp &= ~FDI_LINK_TRAIN_NONE;
3941 temp |= FDI_LINK_TRAIN_PATTERN_1;
3943 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3948 for (i = 0; i < 4; i++) {
3949 reg = FDI_TX_CTL(pipe);
3950 temp = I915_READ(reg);
3951 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3952 temp |= snb_b_fdi_train_param[i];
3953 I915_WRITE(reg, temp);
3958 for (retry = 0; retry < 5; retry++) {
3959 reg = FDI_RX_IIR(pipe);
3960 temp = I915_READ(reg);
3961 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3962 if (temp & FDI_RX_BIT_LOCK) {
3963 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3964 DRM_DEBUG_KMS("FDI train 1 done.\n");
3973 DRM_ERROR("FDI train 1 fail!\n");
3976 reg = FDI_TX_CTL(pipe);
3977 temp = I915_READ(reg);
3978 temp &= ~FDI_LINK_TRAIN_NONE;
3979 temp |= FDI_LINK_TRAIN_PATTERN_2;
3980 if (IS_GEN6(dev_priv)) {
3981 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3983 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3985 I915_WRITE(reg, temp);
3987 reg = FDI_RX_CTL(pipe);
3988 temp = I915_READ(reg);
3989 if (HAS_PCH_CPT(dev_priv)) {
3990 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3991 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3993 temp &= ~FDI_LINK_TRAIN_NONE;
3994 temp |= FDI_LINK_TRAIN_PATTERN_2;
3996 I915_WRITE(reg, temp);
4001 for (i = 0; i < 4; i++) {
4002 reg = FDI_TX_CTL(pipe);
4003 temp = I915_READ(reg);
4004 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4005 temp |= snb_b_fdi_train_param[i];
4006 I915_WRITE(reg, temp);
4011 for (retry = 0; retry < 5; retry++) {
4012 reg = FDI_RX_IIR(pipe);
4013 temp = I915_READ(reg);
4014 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4015 if (temp & FDI_RX_SYMBOL_LOCK) {
4016 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
4017 DRM_DEBUG_KMS("FDI train 2 done.\n");
4026 DRM_ERROR("FDI train 2 fail!\n");
4028 DRM_DEBUG_KMS("FDI train done.\n");
4031 /* Manual link training for Ivy Bridge A0 parts */
4032 static void ivb_manual_fdi_link_train(struct intel_crtc *crtc,
4033 const struct intel_crtc_state *crtc_state)
4035 struct drm_device *dev = crtc->base.dev;
4036 struct drm_i915_private *dev_priv = to_i915(dev);
4037 int pipe = crtc->pipe;
4041 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
4043 reg = FDI_RX_IMR(pipe);
4044 temp = I915_READ(reg);
4045 temp &= ~FDI_RX_SYMBOL_LOCK;
4046 temp &= ~FDI_RX_BIT_LOCK;
4047 I915_WRITE(reg, temp);
4052 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
4053 I915_READ(FDI_RX_IIR(pipe)));
4055 /* Try each vswing and preemphasis setting twice before moving on */
4056 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
4057 /* disable first in case we need to retry */
4058 reg = FDI_TX_CTL(pipe);
4059 temp = I915_READ(reg);
4060 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
4061 temp &= ~FDI_TX_ENABLE;
4062 I915_WRITE(reg, temp);
4064 reg = FDI_RX_CTL(pipe);
4065 temp = I915_READ(reg);
4066 temp &= ~FDI_LINK_TRAIN_AUTO;
4067 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4068 temp &= ~FDI_RX_ENABLE;
4069 I915_WRITE(reg, temp);
4071 /* enable CPU FDI TX and PCH FDI RX */
4072 reg = FDI_TX_CTL(pipe);
4073 temp = I915_READ(reg);
4074 temp &= ~FDI_DP_PORT_WIDTH_MASK;
4075 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
4076 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
4077 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4078 temp |= snb_b_fdi_train_param[j/2];
4079 temp |= FDI_COMPOSITE_SYNC;
4080 I915_WRITE(reg, temp | FDI_TX_ENABLE);
4082 I915_WRITE(FDI_RX_MISC(pipe),
4083 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
4085 reg = FDI_RX_CTL(pipe);
4086 temp = I915_READ(reg);
4087 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
4088 temp |= FDI_COMPOSITE_SYNC;
4089 I915_WRITE(reg, temp | FDI_RX_ENABLE);
4092 udelay(1); /* should be 0.5us */
4094 for (i = 0; i < 4; i++) {
4095 reg = FDI_RX_IIR(pipe);
4096 temp = I915_READ(reg);
4097 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4099 if (temp & FDI_RX_BIT_LOCK ||
4100 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
4101 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
4102 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
4106 udelay(1); /* should be 0.5us */
4109 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
4114 reg = FDI_TX_CTL(pipe);
4115 temp = I915_READ(reg);
4116 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
4117 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
4118 I915_WRITE(reg, temp);
4120 reg = FDI_RX_CTL(pipe);
4121 temp = I915_READ(reg);
4122 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4123 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
4124 I915_WRITE(reg, temp);
4127 udelay(2); /* should be 1.5us */
4129 for (i = 0; i < 4; i++) {
4130 reg = FDI_RX_IIR(pipe);
4131 temp = I915_READ(reg);
4132 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4134 if (temp & FDI_RX_SYMBOL_LOCK ||
4135 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
4136 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
4137 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
4141 udelay(2); /* should be 1.5us */
4144 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
4148 DRM_DEBUG_KMS("FDI train done.\n");
4151 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
4153 struct drm_device *dev = intel_crtc->base.dev;
4154 struct drm_i915_private *dev_priv = to_i915(dev);
4155 int pipe = intel_crtc->pipe;
4159 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
4160 reg = FDI_RX_CTL(pipe);
4161 temp = I915_READ(reg);
4162 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
4163 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
4164 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
4165 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
4170 /* Switch from Rawclk to PCDclk */
4171 temp = I915_READ(reg);
4172 I915_WRITE(reg, temp | FDI_PCDCLK);
4177 /* Enable CPU FDI TX PLL, always on for Ironlake */
4178 reg = FDI_TX_CTL(pipe);
4179 temp = I915_READ(reg);
4180 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
4181 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
4188 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
4190 struct drm_device *dev = intel_crtc->base.dev;
4191 struct drm_i915_private *dev_priv = to_i915(dev);
4192 int pipe = intel_crtc->pipe;
4196 /* Switch from PCDclk to Rawclk */
4197 reg = FDI_RX_CTL(pipe);
4198 temp = I915_READ(reg);
4199 I915_WRITE(reg, temp & ~FDI_PCDCLK);
4201 /* Disable CPU FDI TX PLL */
4202 reg = FDI_TX_CTL(pipe);
4203 temp = I915_READ(reg);
4204 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
4209 reg = FDI_RX_CTL(pipe);
4210 temp = I915_READ(reg);
4211 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
4213 /* Wait for the clocks to turn off. */
4218 static void ironlake_fdi_disable(struct drm_crtc *crtc)
4220 struct drm_device *dev = crtc->dev;
4221 struct drm_i915_private *dev_priv = to_i915(dev);
4222 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4223 int pipe = intel_crtc->pipe;
4227 /* disable CPU FDI tx and PCH FDI rx */
4228 reg = FDI_TX_CTL(pipe);
4229 temp = I915_READ(reg);
4230 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
4233 reg = FDI_RX_CTL(pipe);
4234 temp = I915_READ(reg);
4235 temp &= ~(0x7 << 16);
4236 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
4237 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
4242 /* Ironlake workaround, disable clock pointer after downing FDI */
4243 if (HAS_PCH_IBX(dev_priv))
4244 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
4246 /* still set train pattern 1 */
4247 reg = FDI_TX_CTL(pipe);
4248 temp = I915_READ(reg);
4249 temp &= ~FDI_LINK_TRAIN_NONE;
4250 temp |= FDI_LINK_TRAIN_PATTERN_1;
4251 I915_WRITE(reg, temp);
4253 reg = FDI_RX_CTL(pipe);
4254 temp = I915_READ(reg);
4255 if (HAS_PCH_CPT(dev_priv)) {
4256 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4257 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
4259 temp &= ~FDI_LINK_TRAIN_NONE;
4260 temp |= FDI_LINK_TRAIN_PATTERN_1;
4262 /* BPC in FDI rx is consistent with that in PIPECONF */
4263 temp &= ~(0x07 << 16);
4264 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
4265 I915_WRITE(reg, temp);
4271 bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv)
4273 struct drm_crtc *crtc;
4276 drm_for_each_crtc(crtc, &dev_priv->drm) {
4277 struct drm_crtc_commit *commit;
4278 spin_lock(&crtc->commit_lock);
4279 commit = list_first_entry_or_null(&crtc->commit_list,
4280 struct drm_crtc_commit, commit_entry);
4281 cleanup_done = commit ?
4282 try_wait_for_completion(&commit->cleanup_done) : true;
4283 spin_unlock(&crtc->commit_lock);
4288 drm_crtc_wait_one_vblank(crtc);
4296 void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
4300 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
4302 mutex_lock(&dev_priv->sb_lock);
4304 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
4305 temp |= SBI_SSCCTL_DISABLE;
4306 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
4308 mutex_unlock(&dev_priv->sb_lock);
4311 /* Program iCLKIP clock to the desired frequency */
4312 static void lpt_program_iclkip(struct intel_crtc *crtc)
4314 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
4315 int clock = crtc->config->base.adjusted_mode.crtc_clock;
4316 u32 divsel, phaseinc, auxdiv, phasedir = 0;
4319 lpt_disable_iclkip(dev_priv);
4321 /* The iCLK virtual clock root frequency is in MHz,
4322 * but the adjusted_mode->crtc_clock in in KHz. To get the
4323 * divisors, it is necessary to divide one by another, so we
4324 * convert the virtual clock precision to KHz here for higher
4327 for (auxdiv = 0; auxdiv < 2; auxdiv++) {
4328 u32 iclk_virtual_root_freq = 172800 * 1000;
4329 u32 iclk_pi_range = 64;
4330 u32 desired_divisor;
4332 desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
4334 divsel = (desired_divisor / iclk_pi_range) - 2;
4335 phaseinc = desired_divisor % iclk_pi_range;
4338 * Near 20MHz is a corner case which is
4339 * out of range for the 7-bit divisor
4345 /* This should not happen with any sane values */
4346 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
4347 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
4348 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
4349 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
4351 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
4358 mutex_lock(&dev_priv->sb_lock);
4360 /* Program SSCDIVINTPHASE6 */
4361 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
4362 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
4363 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
4364 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
4365 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
4366 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
4367 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
4368 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
4370 /* Program SSCAUXDIV */
4371 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
4372 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
4373 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
4374 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
4376 /* Enable modulator and associated divider */
4377 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
4378 temp &= ~SBI_SSCCTL_DISABLE;
4379 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
4381 mutex_unlock(&dev_priv->sb_lock);
4383 /* Wait for initialization time */
4386 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
4389 int lpt_get_iclkip(struct drm_i915_private *dev_priv)
4391 u32 divsel, phaseinc, auxdiv;
4392 u32 iclk_virtual_root_freq = 172800 * 1000;
4393 u32 iclk_pi_range = 64;
4394 u32 desired_divisor;
4397 if ((I915_READ(PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0)
4400 mutex_lock(&dev_priv->sb_lock);
4402 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
4403 if (temp & SBI_SSCCTL_DISABLE) {
4404 mutex_unlock(&dev_priv->sb_lock);
4408 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
4409 divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >>
4410 SBI_SSCDIVINTPHASE_DIVSEL_SHIFT;
4411 phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >>
4412 SBI_SSCDIVINTPHASE_INCVAL_SHIFT;
4414 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
4415 auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >>
4416 SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT;
4418 mutex_unlock(&dev_priv->sb_lock);
4420 desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc;
4422 return DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
4423 desired_divisor << auxdiv);
4426 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
4427 enum pipe pch_transcoder)
4429 struct drm_device *dev = crtc->base.dev;
4430 struct drm_i915_private *dev_priv = to_i915(dev);
4431 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
4433 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
4434 I915_READ(HTOTAL(cpu_transcoder)));
4435 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
4436 I915_READ(HBLANK(cpu_transcoder)));
4437 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
4438 I915_READ(HSYNC(cpu_transcoder)));
4440 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
4441 I915_READ(VTOTAL(cpu_transcoder)));
4442 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
4443 I915_READ(VBLANK(cpu_transcoder)));
4444 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
4445 I915_READ(VSYNC(cpu_transcoder)));
4446 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
4447 I915_READ(VSYNCSHIFT(cpu_transcoder)));
4450 static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable)
4452 struct drm_i915_private *dev_priv = to_i915(dev);
4455 temp = I915_READ(SOUTH_CHICKEN1);
4456 if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
4459 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
4460 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
4462 temp &= ~FDI_BC_BIFURCATION_SELECT;
4464 temp |= FDI_BC_BIFURCATION_SELECT;
4466 DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
4467 I915_WRITE(SOUTH_CHICKEN1, temp);
4468 POSTING_READ(SOUTH_CHICKEN1);
4471 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
4473 struct drm_device *dev = intel_crtc->base.dev;
4475 switch (intel_crtc->pipe) {
4479 if (intel_crtc->config->fdi_lanes > 2)
4480 cpt_set_fdi_bc_bifurcation(dev, false);
4482 cpt_set_fdi_bc_bifurcation(dev, true);
4486 cpt_set_fdi_bc_bifurcation(dev, true);
4494 /* Return which DP Port should be selected for Transcoder DP control */
4496 intel_trans_dp_port_sel(struct intel_crtc *crtc)
4498 struct drm_device *dev = crtc->base.dev;
4499 struct intel_encoder *encoder;
4501 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
4502 if (encoder->type == INTEL_OUTPUT_DP ||
4503 encoder->type == INTEL_OUTPUT_EDP)
4504 return enc_to_dig_port(&encoder->base)->port;
4511 * Enable PCH resources required for PCH ports:
4513 * - FDI training & RX/TX
4514 * - update transcoder timings
4515 * - DP transcoding bits
4518 static void ironlake_pch_enable(const struct intel_crtc_state *crtc_state)
4520 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
4521 struct drm_device *dev = crtc->base.dev;
4522 struct drm_i915_private *dev_priv = to_i915(dev);
4523 int pipe = crtc->pipe;
4526 assert_pch_transcoder_disabled(dev_priv, pipe);
4528 if (IS_IVYBRIDGE(dev_priv))
4529 ivybridge_update_fdi_bc_bifurcation(crtc);
4531 /* Write the TU size bits before fdi link training, so that error
4532 * detection works. */
4533 I915_WRITE(FDI_RX_TUSIZE1(pipe),
4534 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
4536 /* For PCH output, training FDI link */
4537 dev_priv->display.fdi_link_train(crtc, crtc_state);
4539 /* We need to program the right clock selection before writing the pixel
4540 * mutliplier into the DPLL. */
4541 if (HAS_PCH_CPT(dev_priv)) {
4544 temp = I915_READ(PCH_DPLL_SEL);
4545 temp |= TRANS_DPLL_ENABLE(pipe);
4546 sel = TRANS_DPLLB_SEL(pipe);
4547 if (crtc_state->shared_dpll ==
4548 intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
4552 I915_WRITE(PCH_DPLL_SEL, temp);
4555 /* XXX: pch pll's can be enabled any time before we enable the PCH
4556 * transcoder, and we actually should do this to not upset any PCH
4557 * transcoder that already use the clock when we share it.
4559 * Note that enable_shared_dpll tries to do the right thing, but
4560 * get_shared_dpll unconditionally resets the pll - we need that to have
4561 * the right LVDS enable sequence. */
4562 intel_enable_shared_dpll(crtc);
4564 /* set transcoder timing, panel must allow it */
4565 assert_panel_unlocked(dev_priv, pipe);
4566 ironlake_pch_transcoder_set_timings(crtc, pipe);
4568 intel_fdi_normal_train(crtc);
4570 /* For PCH DP, enable TRANS_DP_CTL */
4571 if (HAS_PCH_CPT(dev_priv) &&
4572 intel_crtc_has_dp_encoder(crtc_state)) {
4573 const struct drm_display_mode *adjusted_mode =
4574 &crtc_state->base.adjusted_mode;
4575 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
4576 i915_reg_t reg = TRANS_DP_CTL(pipe);
4577 temp = I915_READ(reg);
4578 temp &= ~(TRANS_DP_PORT_SEL_MASK |
4579 TRANS_DP_SYNC_MASK |
4581 temp |= TRANS_DP_OUTPUT_ENABLE;
4582 temp |= bpc << 9; /* same format but at 11:9 */
4584 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
4585 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
4586 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
4587 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
4589 switch (intel_trans_dp_port_sel(crtc)) {
4591 temp |= TRANS_DP_PORT_SEL_B;
4594 temp |= TRANS_DP_PORT_SEL_C;
4597 temp |= TRANS_DP_PORT_SEL_D;
4603 I915_WRITE(reg, temp);
4606 ironlake_enable_pch_transcoder(dev_priv, pipe);
4609 static void lpt_pch_enable(const struct intel_crtc_state *crtc_state)
4611 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
4612 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
4613 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
4615 assert_pch_transcoder_disabled(dev_priv, PIPE_A);
4617 lpt_program_iclkip(crtc);
4619 /* Set transcoder timing. */
4620 ironlake_pch_transcoder_set_timings(crtc, PIPE_A);
4622 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
4625 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
4627 struct drm_i915_private *dev_priv = to_i915(dev);
4628 i915_reg_t dslreg = PIPEDSL(pipe);
4631 temp = I915_READ(dslreg);
4633 if (wait_for(I915_READ(dslreg) != temp, 5)) {
4634 if (wait_for(I915_READ(dslreg) != temp, 5))
4635 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
4640 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
4641 unsigned int scaler_user, int *scaler_id,
4642 int src_w, int src_h, int dst_w, int dst_h)
4644 struct intel_crtc_scaler_state *scaler_state =
4645 &crtc_state->scaler_state;
4646 struct intel_crtc *intel_crtc =
4647 to_intel_crtc(crtc_state->base.crtc);
4648 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
4649 const struct drm_display_mode *adjusted_mode =
4650 &crtc_state->base.adjusted_mode;
4654 * Src coordinates are already rotated by 270 degrees for
4655 * the 90/270 degree plane rotation cases (to match the
4656 * GTT mapping), hence no need to account for rotation here.
4658 need_scaling = src_w != dst_w || src_h != dst_h;
4660 if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
4661 need_scaling = true;
4664 * Scaling/fitting not supported in IF-ID mode in GEN9+
4665 * TODO: Interlace fetch mode doesn't support YUV420 planar formats.
4666 * Once NV12 is enabled, handle it here while allocating scaler
4669 if (INTEL_GEN(dev_priv) >= 9 && crtc_state->base.enable &&
4670 need_scaling && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4671 DRM_DEBUG_KMS("Pipe/Plane scaling not supported with IF-ID mode\n");
4676 * if plane is being disabled or scaler is no more required or force detach
4677 * - free scaler binded to this plane/crtc
4678 * - in order to do this, update crtc->scaler_usage
4680 * Here scaler state in crtc_state is set free so that
4681 * scaler can be assigned to other user. Actual register
4682 * update to free the scaler is done in plane/panel-fit programming.
4683 * For this purpose crtc/plane_state->scaler_id isn't reset here.
4685 if (force_detach || !need_scaling) {
4686 if (*scaler_id >= 0) {
4687 scaler_state->scaler_users &= ~(1 << scaler_user);
4688 scaler_state->scalers[*scaler_id].in_use = 0;
4690 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4691 "Staged freeing scaler id %d scaler_users = 0x%x\n",
4692 intel_crtc->pipe, scaler_user, *scaler_id,
4693 scaler_state->scaler_users);
4700 if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
4701 dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
4703 src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
4704 dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
4705 DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
4706 "size is out of scaler range\n",
4707 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
4711 /* mark this plane as a scaler user in crtc_state */
4712 scaler_state->scaler_users |= (1 << scaler_user);
4713 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4714 "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
4715 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
4716 scaler_state->scaler_users);
4722 * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
4724 * @state: crtc's scaler state
4727 * 0 - scaler_usage updated successfully
4728 * error - requested scaling cannot be supported or other error condition
4730 int skl_update_scaler_crtc(struct intel_crtc_state *state)
4732 const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
4734 return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
4735 &state->scaler_state.scaler_id,
4736 state->pipe_src_w, state->pipe_src_h,
4737 adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
4741 * skl_update_scaler_plane - Stages update to scaler state for a given plane.
4743 * @state: crtc's scaler state
4744 * @plane_state: atomic plane state to update
4747 * 0 - scaler_usage updated successfully
4748 * error - requested scaling cannot be supported or other error condition
4750 static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
4751 struct intel_plane_state *plane_state)
4754 struct intel_plane *intel_plane =
4755 to_intel_plane(plane_state->base.plane);
4756 struct drm_framebuffer *fb = plane_state->base.fb;
4759 bool force_detach = !fb || !plane_state->base.visible;
4761 ret = skl_update_scaler(crtc_state, force_detach,
4762 drm_plane_index(&intel_plane->base),
4763 &plane_state->scaler_id,
4764 drm_rect_width(&plane_state->base.src) >> 16,
4765 drm_rect_height(&plane_state->base.src) >> 16,
4766 drm_rect_width(&plane_state->base.dst),
4767 drm_rect_height(&plane_state->base.dst));
4769 if (ret || plane_state->scaler_id < 0)
4772 /* check colorkey */
4773 if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
4774 DRM_DEBUG_KMS("[PLANE:%d:%s] scaling with color key not allowed",
4775 intel_plane->base.base.id,
4776 intel_plane->base.name);
4780 /* Check src format */
4781 switch (fb->format->format) {
4782 case DRM_FORMAT_RGB565:
4783 case DRM_FORMAT_XBGR8888:
4784 case DRM_FORMAT_XRGB8888:
4785 case DRM_FORMAT_ABGR8888:
4786 case DRM_FORMAT_ARGB8888:
4787 case DRM_FORMAT_XRGB2101010:
4788 case DRM_FORMAT_XBGR2101010:
4789 case DRM_FORMAT_YUYV:
4790 case DRM_FORMAT_YVYU:
4791 case DRM_FORMAT_UYVY:
4792 case DRM_FORMAT_VYUY:
4795 DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
4796 intel_plane->base.base.id, intel_plane->base.name,
4797 fb->base.id, fb->format->format);
4804 static void skylake_scaler_disable(struct intel_crtc *crtc)
4808 for (i = 0; i < crtc->num_scalers; i++)
4809 skl_detach_scaler(crtc, i);
4812 static void skylake_pfit_enable(struct intel_crtc *crtc)
4814 struct drm_device *dev = crtc->base.dev;
4815 struct drm_i915_private *dev_priv = to_i915(dev);
4816 int pipe = crtc->pipe;
4817 struct intel_crtc_scaler_state *scaler_state =
4818 &crtc->config->scaler_state;
4820 if (crtc->config->pch_pfit.enabled) {
4823 if (WARN_ON(crtc->config->scaler_state.scaler_id < 0))
4826 id = scaler_state->scaler_id;
4827 I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
4828 PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
4829 I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
4830 I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
4834 static void ironlake_pfit_enable(struct intel_crtc *crtc)
4836 struct drm_device *dev = crtc->base.dev;
4837 struct drm_i915_private *dev_priv = to_i915(dev);
4838 int pipe = crtc->pipe;
4840 if (crtc->config->pch_pfit.enabled) {
4841 /* Force use of hard-coded filter coefficients
4842 * as some pre-programmed values are broken,
4845 if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv))
4846 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
4847 PF_PIPE_SEL_IVB(pipe));
4849 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
4850 I915_WRITE(PF_WIN_POS(pipe), crtc->config->pch_pfit.pos);
4851 I915_WRITE(PF_WIN_SZ(pipe), crtc->config->pch_pfit.size);
4855 void hsw_enable_ips(struct intel_crtc *crtc)
4857 struct drm_device *dev = crtc->base.dev;
4858 struct drm_i915_private *dev_priv = to_i915(dev);
4860 if (!crtc->config->ips_enabled)
4864 * We can only enable IPS after we enable a plane and wait for a vblank
4865 * This function is called from post_plane_update, which is run after
4869 assert_plane_enabled(dev_priv, crtc->plane);
4870 if (IS_BROADWELL(dev_priv)) {
4871 mutex_lock(&dev_priv->pcu_lock);
4872 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL,
4873 IPS_ENABLE | IPS_PCODE_CONTROL));
4874 mutex_unlock(&dev_priv->pcu_lock);
4875 /* Quoting Art Runyan: "its not safe to expect any particular
4876 * value in IPS_CTL bit 31 after enabling IPS through the
4877 * mailbox." Moreover, the mailbox may return a bogus state,
4878 * so we need to just enable it and continue on.
4881 I915_WRITE(IPS_CTL, IPS_ENABLE);
4882 /* The bit only becomes 1 in the next vblank, so this wait here
4883 * is essentially intel_wait_for_vblank. If we don't have this
4884 * and don't wait for vblanks until the end of crtc_enable, then
4885 * the HW state readout code will complain that the expected
4886 * IPS_CTL value is not the one we read. */
4887 if (intel_wait_for_register(dev_priv,
4888 IPS_CTL, IPS_ENABLE, IPS_ENABLE,
4890 DRM_ERROR("Timed out waiting for IPS enable\n");
4894 void hsw_disable_ips(struct intel_crtc *crtc)
4896 struct drm_device *dev = crtc->base.dev;
4897 struct drm_i915_private *dev_priv = to_i915(dev);
4899 if (!crtc->config->ips_enabled)
4902 assert_plane_enabled(dev_priv, crtc->plane);
4903 if (IS_BROADWELL(dev_priv)) {
4904 mutex_lock(&dev_priv->pcu_lock);
4905 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
4906 mutex_unlock(&dev_priv->pcu_lock);
4907 /* wait for pcode to finish disabling IPS, which may take up to 42ms */
4908 if (intel_wait_for_register(dev_priv,
4909 IPS_CTL, IPS_ENABLE, 0,
4911 DRM_ERROR("Timed out waiting for IPS disable\n");
4913 I915_WRITE(IPS_CTL, 0);
4914 POSTING_READ(IPS_CTL);
4917 /* We need to wait for a vblank before we can disable the plane. */
4918 intel_wait_for_vblank(dev_priv, crtc->pipe);
4921 static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
4923 if (intel_crtc->overlay) {
4924 struct drm_device *dev = intel_crtc->base.dev;
4926 mutex_lock(&dev->struct_mutex);
4927 (void) intel_overlay_switch_off(intel_crtc->overlay);
4928 mutex_unlock(&dev->struct_mutex);
4931 /* Let userspace switch the overlay on again. In most cases userspace
4932 * has to recompute where to put it anyway.
4937 * intel_post_enable_primary - Perform operations after enabling primary plane
4938 * @crtc: the CRTC whose primary plane was just enabled
4940 * Performs potentially sleeping operations that must be done after the primary
4941 * plane is enabled, such as updating FBC and IPS. Note that this may be
4942 * called due to an explicit primary plane update, or due to an implicit
4943 * re-enable that is caused when a sprite plane is updated to no longer
4944 * completely hide the primary plane.
4947 intel_post_enable_primary(struct drm_crtc *crtc)
4949 struct drm_device *dev = crtc->dev;
4950 struct drm_i915_private *dev_priv = to_i915(dev);
4951 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4952 int pipe = intel_crtc->pipe;
4955 * FIXME IPS should be fine as long as one plane is
4956 * enabled, but in practice it seems to have problems
4957 * when going from primary only to sprite only and vice
4960 hsw_enable_ips(intel_crtc);
4963 * Gen2 reports pipe underruns whenever all planes are disabled.
4964 * So don't enable underrun reporting before at least some planes
4966 * FIXME: Need to fix the logic to work when we turn off all planes
4967 * but leave the pipe running.
4969 if (IS_GEN2(dev_priv))
4970 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4972 /* Underruns don't always raise interrupts, so check manually. */
4973 intel_check_cpu_fifo_underruns(dev_priv);
4974 intel_check_pch_fifo_underruns(dev_priv);
4977 /* FIXME move all this to pre_plane_update() with proper state tracking */
4979 intel_pre_disable_primary(struct drm_crtc *crtc)
4981 struct drm_device *dev = crtc->dev;
4982 struct drm_i915_private *dev_priv = to_i915(dev);
4983 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4984 int pipe = intel_crtc->pipe;
4987 * Gen2 reports pipe underruns whenever all planes are disabled.
4988 * So diasble underrun reporting before all the planes get disabled.
4989 * FIXME: Need to fix the logic to work when we turn off all planes
4990 * but leave the pipe running.
4992 if (IS_GEN2(dev_priv))
4993 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4996 * FIXME IPS should be fine as long as one plane is
4997 * enabled, but in practice it seems to have problems
4998 * when going from primary only to sprite only and vice
5001 hsw_disable_ips(intel_crtc);
5004 /* FIXME get rid of this and use pre_plane_update */
5006 intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
5008 struct drm_device *dev = crtc->dev;
5009 struct drm_i915_private *dev_priv = to_i915(dev);
5010 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5011 int pipe = intel_crtc->pipe;
5013 intel_pre_disable_primary(crtc);
5016 * Vblank time updates from the shadow to live plane control register
5017 * are blocked if the memory self-refresh mode is active at that
5018 * moment. So to make sure the plane gets truly disabled, disable
5019 * first the self-refresh mode. The self-refresh enable bit in turn
5020 * will be checked/applied by the HW only at the next frame start
5021 * event which is after the vblank start event, so we need to have a
5022 * wait-for-vblank between disabling the plane and the pipe.
5024 if (HAS_GMCH_DISPLAY(dev_priv) &&
5025 intel_set_memory_cxsr(dev_priv, false))
5026 intel_wait_for_vblank(dev_priv, pipe);
5029 static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
5031 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
5032 struct drm_atomic_state *old_state = old_crtc_state->base.state;
5033 struct intel_crtc_state *pipe_config =
5034 intel_atomic_get_new_crtc_state(to_intel_atomic_state(old_state),
5036 struct drm_plane *primary = crtc->base.primary;
5037 struct drm_plane_state *old_pri_state =
5038 drm_atomic_get_existing_plane_state(old_state, primary);
5040 intel_frontbuffer_flip(to_i915(crtc->base.dev), pipe_config->fb_bits);
5042 if (pipe_config->update_wm_post && pipe_config->base.active)
5043 intel_update_watermarks(crtc);
5045 if (old_pri_state) {
5046 struct intel_plane_state *primary_state =
5047 intel_atomic_get_new_plane_state(to_intel_atomic_state(old_state),
5048 to_intel_plane(primary));
5049 struct intel_plane_state *old_primary_state =
5050 to_intel_plane_state(old_pri_state);
5052 intel_fbc_post_update(crtc);
5054 if (primary_state->base.visible &&
5055 (needs_modeset(&pipe_config->base) ||
5056 !old_primary_state->base.visible))
5057 intel_post_enable_primary(&crtc->base);
5061 static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
5062 struct intel_crtc_state *pipe_config)
5064 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
5065 struct drm_device *dev = crtc->base.dev;
5066 struct drm_i915_private *dev_priv = to_i915(dev);
5067 struct drm_atomic_state *old_state = old_crtc_state->base.state;
5068 struct drm_plane *primary = crtc->base.primary;
5069 struct drm_plane_state *old_pri_state =
5070 drm_atomic_get_existing_plane_state(old_state, primary);
5071 bool modeset = needs_modeset(&pipe_config->base);
5072 struct intel_atomic_state *old_intel_state =
5073 to_intel_atomic_state(old_state);
5075 if (old_pri_state) {
5076 struct intel_plane_state *primary_state =
5077 intel_atomic_get_new_plane_state(old_intel_state,
5078 to_intel_plane(primary));
5079 struct intel_plane_state *old_primary_state =
5080 to_intel_plane_state(old_pri_state);
5082 intel_fbc_pre_update(crtc, pipe_config, primary_state);
5084 if (old_primary_state->base.visible &&
5085 (modeset || !primary_state->base.visible))
5086 intel_pre_disable_primary(&crtc->base);
5090 * Vblank time updates from the shadow to live plane control register
5091 * are blocked if the memory self-refresh mode is active at that
5092 * moment. So to make sure the plane gets truly disabled, disable
5093 * first the self-refresh mode. The self-refresh enable bit in turn
5094 * will be checked/applied by the HW only at the next frame start
5095 * event which is after the vblank start event, so we need to have a
5096 * wait-for-vblank between disabling the plane and the pipe.
5098 if (HAS_GMCH_DISPLAY(dev_priv) && old_crtc_state->base.active &&
5099 pipe_config->disable_cxsr && intel_set_memory_cxsr(dev_priv, false))
5100 intel_wait_for_vblank(dev_priv, crtc->pipe);
5103 * IVB workaround: must disable low power watermarks for at least
5104 * one frame before enabling scaling. LP watermarks can be re-enabled
5105 * when scaling is disabled.
5107 * WaCxSRDisabledForSpriteScaling:ivb
5109 if (pipe_config->disable_lp_wm && ilk_disable_lp_wm(dev))
5110 intel_wait_for_vblank(dev_priv, crtc->pipe);
5113 * If we're doing a modeset, we're done. No need to do any pre-vblank
5114 * watermark programming here.
5116 if (needs_modeset(&pipe_config->base))
5120 * For platforms that support atomic watermarks, program the
5121 * 'intermediate' watermarks immediately. On pre-gen9 platforms, these
5122 * will be the intermediate values that are safe for both pre- and
5123 * post- vblank; when vblank happens, the 'active' values will be set
5124 * to the final 'target' values and we'll do this again to get the
5125 * optimal watermarks. For gen9+ platforms, the values we program here
5126 * will be the final target values which will get automatically latched
5127 * at vblank time; no further programming will be necessary.
5129 * If a platform hasn't been transitioned to atomic watermarks yet,
5130 * we'll continue to update watermarks the old way, if flags tell
5133 if (dev_priv->display.initial_watermarks != NULL)
5134 dev_priv->display.initial_watermarks(old_intel_state,
5136 else if (pipe_config->update_wm_pre)
5137 intel_update_watermarks(crtc);
5140 static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
5142 struct drm_device *dev = crtc->dev;
5143 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5144 struct drm_plane *p;
5145 int pipe = intel_crtc->pipe;
5147 intel_crtc_dpms_overlay_disable(intel_crtc);
5149 drm_for_each_plane_mask(p, dev, plane_mask)
5150 to_intel_plane(p)->disable_plane(to_intel_plane(p), intel_crtc);
5153 * FIXME: Once we grow proper nuclear flip support out of this we need
5154 * to compute the mask of flip planes precisely. For the time being
5155 * consider this a flip to a NULL plane.
5157 intel_frontbuffer_flip(to_i915(dev), INTEL_FRONTBUFFER_ALL_MASK(pipe));
5160 static void intel_encoders_pre_pll_enable(struct drm_crtc *crtc,
5161 struct intel_crtc_state *crtc_state,
5162 struct drm_atomic_state *old_state)
5164 struct drm_connector_state *conn_state;
5165 struct drm_connector *conn;
5168 for_each_new_connector_in_state(old_state, conn, conn_state, i) {
5169 struct intel_encoder *encoder =
5170 to_intel_encoder(conn_state->best_encoder);
5172 if (conn_state->crtc != crtc)
5175 if (encoder->pre_pll_enable)
5176 encoder->pre_pll_enable(encoder, crtc_state, conn_state);
5180 static void intel_encoders_pre_enable(struct drm_crtc *crtc,
5181 struct intel_crtc_state *crtc_state,
5182 struct drm_atomic_state *old_state)
5184 struct drm_connector_state *conn_state;
5185 struct drm_connector *conn;
5188 for_each_new_connector_in_state(old_state, conn, conn_state, i) {
5189 struct intel_encoder *encoder =
5190 to_intel_encoder(conn_state->best_encoder);
5192 if (conn_state->crtc != crtc)
5195 if (encoder->pre_enable)
5196 encoder->pre_enable(encoder, crtc_state, conn_state);
5200 static void intel_encoders_enable(struct drm_crtc *crtc,
5201 struct intel_crtc_state *crtc_state,
5202 struct drm_atomic_state *old_state)
5204 struct drm_connector_state *conn_state;
5205 struct drm_connector *conn;
5208 for_each_new_connector_in_state(old_state, conn, conn_state, i) {
5209 struct intel_encoder *encoder =
5210 to_intel_encoder(conn_state->best_encoder);
5212 if (conn_state->crtc != crtc)
5215 encoder->enable(encoder, crtc_state, conn_state);
5216 intel_opregion_notify_encoder(encoder, true);
5220 static void intel_encoders_disable(struct drm_crtc *crtc,
5221 struct intel_crtc_state *old_crtc_state,
5222 struct drm_atomic_state *old_state)
5224 struct drm_connector_state *old_conn_state;
5225 struct drm_connector *conn;
5228 for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
5229 struct intel_encoder *encoder =
5230 to_intel_encoder(old_conn_state->best_encoder);
5232 if (old_conn_state->crtc != crtc)
5235 intel_opregion_notify_encoder(encoder, false);
5236 encoder->disable(encoder, old_crtc_state, old_conn_state);
5240 static void intel_encoders_post_disable(struct drm_crtc *crtc,
5241 struct intel_crtc_state *old_crtc_state,
5242 struct drm_atomic_state *old_state)
5244 struct drm_connector_state *old_conn_state;
5245 struct drm_connector *conn;
5248 for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
5249 struct intel_encoder *encoder =
5250 to_intel_encoder(old_conn_state->best_encoder);
5252 if (old_conn_state->crtc != crtc)
5255 if (encoder->post_disable)
5256 encoder->post_disable(encoder, old_crtc_state, old_conn_state);
5260 static void intel_encoders_post_pll_disable(struct drm_crtc *crtc,
5261 struct intel_crtc_state *old_crtc_state,
5262 struct drm_atomic_state *old_state)
5264 struct drm_connector_state *old_conn_state;
5265 struct drm_connector *conn;
5268 for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
5269 struct intel_encoder *encoder =
5270 to_intel_encoder(old_conn_state->best_encoder);
5272 if (old_conn_state->crtc != crtc)
5275 if (encoder->post_pll_disable)
5276 encoder->post_pll_disable(encoder, old_crtc_state, old_conn_state);
5280 static void ironlake_crtc_enable(struct intel_crtc_state *pipe_config,
5281 struct drm_atomic_state *old_state)
5283 struct drm_crtc *crtc = pipe_config->base.crtc;
5284 struct drm_device *dev = crtc->dev;
5285 struct drm_i915_private *dev_priv = to_i915(dev);
5286 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5287 int pipe = intel_crtc->pipe;
5288 struct intel_atomic_state *old_intel_state =
5289 to_intel_atomic_state(old_state);
5291 if (WARN_ON(intel_crtc->active))
5295 * Sometimes spurious CPU pipe underruns happen during FDI
5296 * training, at least with VGA+HDMI cloning. Suppress them.
5298 * On ILK we get an occasional spurious CPU pipe underruns
5299 * between eDP port A enable and vdd enable. Also PCH port
5300 * enable seems to result in the occasional CPU pipe underrun.
5302 * Spurious PCH underruns also occur during PCH enabling.
5304 if (intel_crtc->config->has_pch_encoder || IS_GEN5(dev_priv))
5305 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5306 if (intel_crtc->config->has_pch_encoder)
5307 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
5309 if (intel_crtc->config->has_pch_encoder)
5310 intel_prepare_shared_dpll(intel_crtc);
5312 if (intel_crtc_has_dp_encoder(intel_crtc->config))
5313 intel_dp_set_m_n(intel_crtc, M1_N1);
5315 intel_set_pipe_timings(intel_crtc);
5316 intel_set_pipe_src_size(intel_crtc);
5318 if (intel_crtc->config->has_pch_encoder) {
5319 intel_cpu_transcoder_set_m_n(intel_crtc,
5320 &intel_crtc->config->fdi_m_n, NULL);
5323 ironlake_set_pipeconf(crtc);
5325 intel_crtc->active = true;
5327 intel_encoders_pre_enable(crtc, pipe_config, old_state);
5329 if (intel_crtc->config->has_pch_encoder) {
5330 /* Note: FDI PLL enabling _must_ be done before we enable the
5331 * cpu pipes, hence this is separate from all the other fdi/pch
5333 ironlake_fdi_pll_enable(intel_crtc);
5335 assert_fdi_tx_disabled(dev_priv, pipe);
5336 assert_fdi_rx_disabled(dev_priv, pipe);
5339 ironlake_pfit_enable(intel_crtc);
5342 * On ILK+ LUT must be loaded before the pipe is running but with
5345 intel_color_load_luts(&pipe_config->base);
5347 if (dev_priv->display.initial_watermarks != NULL)
5348 dev_priv->display.initial_watermarks(old_intel_state, intel_crtc->config);
5349 intel_enable_pipe(intel_crtc);
5351 if (intel_crtc->config->has_pch_encoder)
5352 ironlake_pch_enable(pipe_config);
5354 assert_vblank_disabled(crtc);
5355 drm_crtc_vblank_on(crtc);
5357 intel_encoders_enable(crtc, pipe_config, old_state);
5359 if (HAS_PCH_CPT(dev_priv))
5360 cpt_verify_modeset(dev, intel_crtc->pipe);
5362 /* Must wait for vblank to avoid spurious PCH FIFO underruns */
5363 if (intel_crtc->config->has_pch_encoder)
5364 intel_wait_for_vblank(dev_priv, pipe);
5365 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5366 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
5369 /* IPS only exists on ULT machines and is tied to pipe A. */
5370 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
5372 return HAS_IPS(to_i915(crtc->base.dev)) && crtc->pipe == PIPE_A;
5375 static void glk_pipe_scaler_clock_gating_wa(struct drm_i915_private *dev_priv,
5376 enum pipe pipe, bool apply)
5378 u32 val = I915_READ(CLKGATE_DIS_PSL(pipe));
5379 u32 mask = DPF_GATING_DIS | DPF_RAM_GATING_DIS | DPFR_GATING_DIS;
5386 I915_WRITE(CLKGATE_DIS_PSL(pipe), val);
5389 static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
5390 struct drm_atomic_state *old_state)
5392 struct drm_crtc *crtc = pipe_config->base.crtc;
5393 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
5394 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5395 int pipe = intel_crtc->pipe, hsw_workaround_pipe;
5396 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
5397 struct intel_atomic_state *old_intel_state =
5398 to_intel_atomic_state(old_state);
5399 bool psl_clkgate_wa;
5401 if (WARN_ON(intel_crtc->active))
5404 intel_encoders_pre_pll_enable(crtc, pipe_config, old_state);
5406 if (intel_crtc->config->shared_dpll)
5407 intel_enable_shared_dpll(intel_crtc);
5409 if (intel_crtc_has_dp_encoder(intel_crtc->config))
5410 intel_dp_set_m_n(intel_crtc, M1_N1);
5412 if (!transcoder_is_dsi(cpu_transcoder))
5413 intel_set_pipe_timings(intel_crtc);
5415 intel_set_pipe_src_size(intel_crtc);
5417 if (cpu_transcoder != TRANSCODER_EDP &&
5418 !transcoder_is_dsi(cpu_transcoder)) {
5419 I915_WRITE(PIPE_MULT(cpu_transcoder),
5420 intel_crtc->config->pixel_multiplier - 1);
5423 if (intel_crtc->config->has_pch_encoder) {
5424 intel_cpu_transcoder_set_m_n(intel_crtc,
5425 &intel_crtc->config->fdi_m_n, NULL);
5428 if (!transcoder_is_dsi(cpu_transcoder))
5429 haswell_set_pipeconf(crtc);
5431 haswell_set_pipemisc(crtc);
5433 intel_color_set_csc(&pipe_config->base);
5435 intel_crtc->active = true;
5437 intel_encoders_pre_enable(crtc, pipe_config, old_state);
5439 if (!transcoder_is_dsi(cpu_transcoder))
5440 intel_ddi_enable_pipe_clock(pipe_config);
5442 /* Display WA #1180: WaDisableScalarClockGating: glk, cnl */
5443 psl_clkgate_wa = (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
5444 intel_crtc->config->pch_pfit.enabled;
5446 glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
5448 if (INTEL_GEN(dev_priv) >= 9)
5449 skylake_pfit_enable(intel_crtc);
5451 ironlake_pfit_enable(intel_crtc);
5454 * On ILK+ LUT must be loaded before the pipe is running but with
5457 intel_color_load_luts(&pipe_config->base);
5459 intel_ddi_set_pipe_settings(pipe_config);
5460 if (!transcoder_is_dsi(cpu_transcoder))
5461 intel_ddi_enable_transcoder_func(pipe_config);
5463 if (dev_priv->display.initial_watermarks != NULL)
5464 dev_priv->display.initial_watermarks(old_intel_state, pipe_config);
5466 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
5467 if (!transcoder_is_dsi(cpu_transcoder))
5468 intel_enable_pipe(intel_crtc);
5470 if (intel_crtc->config->has_pch_encoder)
5471 lpt_pch_enable(pipe_config);
5473 if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DP_MST))
5474 intel_ddi_set_vc_payload_alloc(pipe_config, true);
5476 assert_vblank_disabled(crtc);
5477 drm_crtc_vblank_on(crtc);
5479 intel_encoders_enable(crtc, pipe_config, old_state);
5481 if (psl_clkgate_wa) {
5482 intel_wait_for_vblank(dev_priv, pipe);
5483 glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false);
5486 /* If we change the relative order between pipe/planes enabling, we need
5487 * to change the workaround. */
5488 hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
5489 if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
5490 intel_wait_for_vblank(dev_priv, hsw_workaround_pipe);
5491 intel_wait_for_vblank(dev_priv, hsw_workaround_pipe);
5495 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
5497 struct drm_device *dev = crtc->base.dev;
5498 struct drm_i915_private *dev_priv = to_i915(dev);
5499 int pipe = crtc->pipe;
5501 /* To avoid upsetting the power well on haswell only disable the pfit if
5502 * it's in use. The hw state code will make sure we get this right. */
5503 if (force || crtc->config->pch_pfit.enabled) {
5504 I915_WRITE(PF_CTL(pipe), 0);
5505 I915_WRITE(PF_WIN_POS(pipe), 0);
5506 I915_WRITE(PF_WIN_SZ(pipe), 0);
5510 static void ironlake_crtc_disable(struct intel_crtc_state *old_crtc_state,
5511 struct drm_atomic_state *old_state)
5513 struct drm_crtc *crtc = old_crtc_state->base.crtc;
5514 struct drm_device *dev = crtc->dev;
5515 struct drm_i915_private *dev_priv = to_i915(dev);
5516 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5517 int pipe = intel_crtc->pipe;
5520 * Sometimes spurious CPU pipe underruns happen when the
5521 * pipe is already disabled, but FDI RX/TX is still enabled.
5522 * Happens at least with VGA+HDMI cloning. Suppress them.
5524 if (intel_crtc->config->has_pch_encoder) {
5525 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5526 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
5529 intel_encoders_disable(crtc, old_crtc_state, old_state);
5531 drm_crtc_vblank_off(crtc);
5532 assert_vblank_disabled(crtc);
5534 intel_disable_pipe(intel_crtc);
5536 ironlake_pfit_disable(intel_crtc, false);
5538 if (intel_crtc->config->has_pch_encoder)
5539 ironlake_fdi_disable(crtc);
5541 intel_encoders_post_disable(crtc, old_crtc_state, old_state);
5543 if (intel_crtc->config->has_pch_encoder) {
5544 ironlake_disable_pch_transcoder(dev_priv, pipe);
5546 if (HAS_PCH_CPT(dev_priv)) {
5550 /* disable TRANS_DP_CTL */
5551 reg = TRANS_DP_CTL(pipe);
5552 temp = I915_READ(reg);
5553 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
5554 TRANS_DP_PORT_SEL_MASK);
5555 temp |= TRANS_DP_PORT_SEL_NONE;
5556 I915_WRITE(reg, temp);
5558 /* disable DPLL_SEL */
5559 temp = I915_READ(PCH_DPLL_SEL);
5560 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
5561 I915_WRITE(PCH_DPLL_SEL, temp);
5564 ironlake_fdi_pll_disable(intel_crtc);
5567 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5568 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
5571 static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
5572 struct drm_atomic_state *old_state)
5574 struct drm_crtc *crtc = old_crtc_state->base.crtc;
5575 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
5576 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5577 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
5579 intel_encoders_disable(crtc, old_crtc_state, old_state);
5581 drm_crtc_vblank_off(crtc);
5582 assert_vblank_disabled(crtc);
5584 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
5585 if (!transcoder_is_dsi(cpu_transcoder))
5586 intel_disable_pipe(intel_crtc);
5588 if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DP_MST))
5589 intel_ddi_set_vc_payload_alloc(intel_crtc->config, false);
5591 if (!transcoder_is_dsi(cpu_transcoder))
5592 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
5594 if (INTEL_GEN(dev_priv) >= 9)
5595 skylake_scaler_disable(intel_crtc);
5597 ironlake_pfit_disable(intel_crtc, false);
5599 if (!transcoder_is_dsi(cpu_transcoder))
5600 intel_ddi_disable_pipe_clock(intel_crtc->config);
5602 intel_encoders_post_disable(crtc, old_crtc_state, old_state);
5605 static void i9xx_pfit_enable(struct intel_crtc *crtc)
5607 struct drm_device *dev = crtc->base.dev;
5608 struct drm_i915_private *dev_priv = to_i915(dev);
5609 struct intel_crtc_state *pipe_config = crtc->config;
5611 if (!pipe_config->gmch_pfit.control)
5615 * The panel fitter should only be adjusted whilst the pipe is disabled,
5616 * according to register description and PRM.
5618 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
5619 assert_pipe_disabled(dev_priv, crtc->pipe);
5621 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
5622 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
5624 /* Border color in case we don't scale up to the full screen. Black by
5625 * default, change to something else for debugging. */
5626 I915_WRITE(BCLRPAT(crtc->pipe), 0);
5629 enum intel_display_power_domain intel_port_to_power_domain(enum port port)
5633 return POWER_DOMAIN_PORT_DDI_A_LANES;
5635 return POWER_DOMAIN_PORT_DDI_B_LANES;
5637 return POWER_DOMAIN_PORT_DDI_C_LANES;
5639 return POWER_DOMAIN_PORT_DDI_D_LANES;
5641 return POWER_DOMAIN_PORT_DDI_E_LANES;
5644 return POWER_DOMAIN_PORT_OTHER;
5648 static u64 get_crtc_power_domains(struct drm_crtc *crtc,
5649 struct intel_crtc_state *crtc_state)
5651 struct drm_device *dev = crtc->dev;
5652 struct drm_i915_private *dev_priv = to_i915(dev);
5653 struct drm_encoder *encoder;
5654 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5655 enum pipe pipe = intel_crtc->pipe;
5657 enum transcoder transcoder = crtc_state->cpu_transcoder;
5659 if (!crtc_state->base.active)
5662 mask = BIT(POWER_DOMAIN_PIPE(pipe));
5663 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
5664 if (crtc_state->pch_pfit.enabled ||
5665 crtc_state->pch_pfit.force_thru)
5666 mask |= BIT_ULL(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
5668 drm_for_each_encoder_mask(encoder, dev, crtc_state->base.encoder_mask) {
5669 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
5671 mask |= BIT_ULL(intel_encoder->power_domain);
5674 if (HAS_DDI(dev_priv) && crtc_state->has_audio)
5675 mask |= BIT(POWER_DOMAIN_AUDIO);
5677 if (crtc_state->shared_dpll)
5678 mask |= BIT_ULL(POWER_DOMAIN_PLLS);
5684 modeset_get_crtc_power_domains(struct drm_crtc *crtc,
5685 struct intel_crtc_state *crtc_state)
5687 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
5688 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5689 enum intel_display_power_domain domain;
5690 u64 domains, new_domains, old_domains;
5692 old_domains = intel_crtc->enabled_power_domains;
5693 intel_crtc->enabled_power_domains = new_domains =
5694 get_crtc_power_domains(crtc, crtc_state);
5696 domains = new_domains & ~old_domains;
5698 for_each_power_domain(domain, domains)
5699 intel_display_power_get(dev_priv, domain);
5701 return old_domains & ~new_domains;
5704 static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
5707 enum intel_display_power_domain domain;
5709 for_each_power_domain(domain, domains)
5710 intel_display_power_put(dev_priv, domain);
5713 static void valleyview_crtc_enable(struct intel_crtc_state *pipe_config,
5714 struct drm_atomic_state *old_state)
5716 struct intel_atomic_state *old_intel_state =
5717 to_intel_atomic_state(old_state);
5718 struct drm_crtc *crtc = pipe_config->base.crtc;
5719 struct drm_device *dev = crtc->dev;
5720 struct drm_i915_private *dev_priv = to_i915(dev);
5721 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5722 int pipe = intel_crtc->pipe;
5724 if (WARN_ON(intel_crtc->active))
5727 if (intel_crtc_has_dp_encoder(intel_crtc->config))
5728 intel_dp_set_m_n(intel_crtc, M1_N1);
5730 intel_set_pipe_timings(intel_crtc);
5731 intel_set_pipe_src_size(intel_crtc);
5733 if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) {
5734 struct drm_i915_private *dev_priv = to_i915(dev);
5736 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
5737 I915_WRITE(CHV_CANVAS(pipe), 0);
5740 i9xx_set_pipeconf(intel_crtc);
5742 intel_crtc->active = true;
5744 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5746 intel_encoders_pre_pll_enable(crtc, pipe_config, old_state);
5748 if (IS_CHERRYVIEW(dev_priv)) {
5749 chv_prepare_pll(intel_crtc, intel_crtc->config);
5750 chv_enable_pll(intel_crtc, intel_crtc->config);
5752 vlv_prepare_pll(intel_crtc, intel_crtc->config);
5753 vlv_enable_pll(intel_crtc, intel_crtc->config);
5756 intel_encoders_pre_enable(crtc, pipe_config, old_state);
5758 i9xx_pfit_enable(intel_crtc);
5760 intel_color_load_luts(&pipe_config->base);
5762 dev_priv->display.initial_watermarks(old_intel_state,
5764 intel_enable_pipe(intel_crtc);
5766 assert_vblank_disabled(crtc);
5767 drm_crtc_vblank_on(crtc);
5769 intel_encoders_enable(crtc, pipe_config, old_state);
5772 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
5774 struct drm_device *dev = crtc->base.dev;
5775 struct drm_i915_private *dev_priv = to_i915(dev);
5777 I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
5778 I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
5781 static void i9xx_crtc_enable(struct intel_crtc_state *pipe_config,
5782 struct drm_atomic_state *old_state)
5784 struct intel_atomic_state *old_intel_state =
5785 to_intel_atomic_state(old_state);
5786 struct drm_crtc *crtc = pipe_config->base.crtc;
5787 struct drm_device *dev = crtc->dev;
5788 struct drm_i915_private *dev_priv = to_i915(dev);
5789 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5790 enum pipe pipe = intel_crtc->pipe;
5792 if (WARN_ON(intel_crtc->active))
5795 i9xx_set_pll_dividers(intel_crtc);
5797 if (intel_crtc_has_dp_encoder(intel_crtc->config))
5798 intel_dp_set_m_n(intel_crtc, M1_N1);
5800 intel_set_pipe_timings(intel_crtc);
5801 intel_set_pipe_src_size(intel_crtc);
5803 i9xx_set_pipeconf(intel_crtc);
5805 intel_crtc->active = true;
5807 if (!IS_GEN2(dev_priv))
5808 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5810 intel_encoders_pre_enable(crtc, pipe_config, old_state);
5812 i9xx_enable_pll(intel_crtc, pipe_config);
5814 i9xx_pfit_enable(intel_crtc);
5816 intel_color_load_luts(&pipe_config->base);
5818 if (dev_priv->display.initial_watermarks != NULL)
5819 dev_priv->display.initial_watermarks(old_intel_state,
5820 intel_crtc->config);
5822 intel_update_watermarks(intel_crtc);
5823 intel_enable_pipe(intel_crtc);
5825 assert_vblank_disabled(crtc);
5826 drm_crtc_vblank_on(crtc);
5828 intel_encoders_enable(crtc, pipe_config, old_state);
5831 static void i9xx_pfit_disable(struct intel_crtc *crtc)
5833 struct drm_device *dev = crtc->base.dev;
5834 struct drm_i915_private *dev_priv = to_i915(dev);
5836 if (!crtc->config->gmch_pfit.control)
5839 assert_pipe_disabled(dev_priv, crtc->pipe);
5841 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
5842 I915_READ(PFIT_CONTROL));
5843 I915_WRITE(PFIT_CONTROL, 0);
5846 static void i9xx_crtc_disable(struct intel_crtc_state *old_crtc_state,
5847 struct drm_atomic_state *old_state)
5849 struct drm_crtc *crtc = old_crtc_state->base.crtc;
5850 struct drm_device *dev = crtc->dev;
5851 struct drm_i915_private *dev_priv = to_i915(dev);
5852 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5853 int pipe = intel_crtc->pipe;
5856 * On gen2 planes are double buffered but the pipe isn't, so we must
5857 * wait for planes to fully turn off before disabling the pipe.
5859 if (IS_GEN2(dev_priv))
5860 intel_wait_for_vblank(dev_priv, pipe);
5862 intel_encoders_disable(crtc, old_crtc_state, old_state);
5864 drm_crtc_vblank_off(crtc);
5865 assert_vblank_disabled(crtc);
5867 intel_disable_pipe(intel_crtc);
5869 i9xx_pfit_disable(intel_crtc);
5871 intel_encoders_post_disable(crtc, old_crtc_state, old_state);
5873 if (!intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DSI)) {
5874 if (IS_CHERRYVIEW(dev_priv))
5875 chv_disable_pll(dev_priv, pipe);
5876 else if (IS_VALLEYVIEW(dev_priv))
5877 vlv_disable_pll(dev_priv, pipe);
5879 i9xx_disable_pll(intel_crtc);
5882 intel_encoders_post_pll_disable(crtc, old_crtc_state, old_state);
5884 if (!IS_GEN2(dev_priv))
5885 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5887 if (!dev_priv->display.initial_watermarks)
5888 intel_update_watermarks(intel_crtc);
5890 /* clock the pipe down to 640x480@60 to potentially save power */
5891 if (IS_I830(dev_priv))
5892 i830_enable_pipe(dev_priv, pipe);
5895 static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,
5896 struct drm_modeset_acquire_ctx *ctx)
5898 struct intel_encoder *encoder;
5899 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5900 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
5901 enum intel_display_power_domain domain;
5903 struct drm_atomic_state *state;
5904 struct intel_crtc_state *crtc_state;
5907 if (!intel_crtc->active)
5910 if (crtc->primary->state->visible) {
5911 intel_pre_disable_primary_noatomic(crtc);
5913 intel_crtc_disable_planes(crtc, 1 << drm_plane_index(crtc->primary));
5914 crtc->primary->state->visible = false;
5917 state = drm_atomic_state_alloc(crtc->dev);
5919 DRM_DEBUG_KMS("failed to disable [CRTC:%d:%s], out of memory",
5920 crtc->base.id, crtc->name);
5924 state->acquire_ctx = ctx;
5926 /* Everything's already locked, -EDEADLK can't happen. */
5927 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
5928 ret = drm_atomic_add_affected_connectors(state, crtc);
5930 WARN_ON(IS_ERR(crtc_state) || ret);
5932 dev_priv->display.crtc_disable(crtc_state, state);
5934 drm_atomic_state_put(state);
5936 DRM_DEBUG_KMS("[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
5937 crtc->base.id, crtc->name);
5939 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->state, NULL) < 0);
5940 crtc->state->active = false;
5941 intel_crtc->active = false;
5942 crtc->enabled = false;
5943 crtc->state->connector_mask = 0;
5944 crtc->state->encoder_mask = 0;
5946 for_each_encoder_on_crtc(crtc->dev, crtc, encoder)
5947 encoder->base.crtc = NULL;
5949 intel_fbc_disable(intel_crtc);
5950 intel_update_watermarks(intel_crtc);
5951 intel_disable_shared_dpll(intel_crtc);
5953 domains = intel_crtc->enabled_power_domains;
5954 for_each_power_domain(domain, domains)
5955 intel_display_power_put(dev_priv, domain);
5956 intel_crtc->enabled_power_domains = 0;
5958 dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe);
5959 dev_priv->min_cdclk[intel_crtc->pipe] = 0;
5963 * turn all crtc's off, but do not adjust state
5964 * This has to be paired with a call to intel_modeset_setup_hw_state.
5966 int intel_display_suspend(struct drm_device *dev)
5968 struct drm_i915_private *dev_priv = to_i915(dev);
5969 struct drm_atomic_state *state;
5972 state = drm_atomic_helper_suspend(dev);
5973 ret = PTR_ERR_OR_ZERO(state);
5975 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
5977 dev_priv->modeset_restore_state = state;
5981 void intel_encoder_destroy(struct drm_encoder *encoder)
5983 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
5985 drm_encoder_cleanup(encoder);
5986 kfree(intel_encoder);
5989 /* Cross check the actual hw state with our own modeset state tracking (and it's
5990 * internal consistency). */
5991 static void intel_connector_verify_state(struct drm_crtc_state *crtc_state,
5992 struct drm_connector_state *conn_state)
5994 struct intel_connector *connector = to_intel_connector(conn_state->connector);
5996 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
5997 connector->base.base.id,
5998 connector->base.name);
6000 if (connector->get_hw_state(connector)) {
6001 struct intel_encoder *encoder = connector->encoder;
6003 I915_STATE_WARN(!crtc_state,
6004 "connector enabled without attached crtc\n");
6009 I915_STATE_WARN(!crtc_state->active,
6010 "connector is active, but attached crtc isn't\n");
6012 if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
6015 I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
6016 "atomic encoder doesn't match attached encoder\n");
6018 I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
6019 "attached encoder crtc differs from connector crtc\n");
6021 I915_STATE_WARN(crtc_state && crtc_state->active,
6022 "attached crtc is active, but connector isn't\n");
6023 I915_STATE_WARN(!crtc_state && conn_state->best_encoder,
6024 "best encoder set without crtc!\n");
6028 int intel_connector_init(struct intel_connector *connector)
6030 struct intel_digital_connector_state *conn_state;
6033 * Allocate enough memory to hold intel_digital_connector_state,
6034 * This might be a few bytes too many, but for connectors that don't
6035 * need it we'll free the state and allocate a smaller one on the first
6036 * succesful commit anyway.
6038 conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL);
6042 __drm_atomic_helper_connector_reset(&connector->base,
6048 struct intel_connector *intel_connector_alloc(void)
6050 struct intel_connector *connector;
6052 connector = kzalloc(sizeof *connector, GFP_KERNEL);
6056 if (intel_connector_init(connector) < 0) {
6065 * Free the bits allocated by intel_connector_alloc.
6066 * This should only be used after intel_connector_alloc has returned
6067 * successfully, and before drm_connector_init returns successfully.
6068 * Otherwise the destroy callbacks for the connector and the state should
6069 * take care of proper cleanup/free
6071 void intel_connector_free(struct intel_connector *connector)
6073 kfree(to_intel_digital_connector_state(connector->base.state));
6077 /* Simple connector->get_hw_state implementation for encoders that support only
6078 * one connector and no cloning and hence the encoder state determines the state
6079 * of the connector. */
6080 bool intel_connector_get_hw_state(struct intel_connector *connector)
6083 struct intel_encoder *encoder = connector->encoder;
6085 return encoder->get_hw_state(encoder, &pipe);
6088 static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
6090 if (crtc_state->base.enable && crtc_state->has_pch_encoder)
6091 return crtc_state->fdi_lanes;
6096 static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
6097 struct intel_crtc_state *pipe_config)
6099 struct drm_i915_private *dev_priv = to_i915(dev);
6100 struct drm_atomic_state *state = pipe_config->base.state;
6101 struct intel_crtc *other_crtc;
6102 struct intel_crtc_state *other_crtc_state;
6104 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
6105 pipe_name(pipe), pipe_config->fdi_lanes);
6106 if (pipe_config->fdi_lanes > 4) {
6107 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
6108 pipe_name(pipe), pipe_config->fdi_lanes);
6112 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
6113 if (pipe_config->fdi_lanes > 2) {
6114 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
6115 pipe_config->fdi_lanes);
6122 if (INTEL_INFO(dev_priv)->num_pipes == 2)
6125 /* Ivybridge 3 pipe is really complicated */
6130 if (pipe_config->fdi_lanes <= 2)
6133 other_crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_C);
6135 intel_atomic_get_crtc_state(state, other_crtc);
6136 if (IS_ERR(other_crtc_state))
6137 return PTR_ERR(other_crtc_state);
6139 if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
6140 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
6141 pipe_name(pipe), pipe_config->fdi_lanes);
6146 if (pipe_config->fdi_lanes > 2) {
6147 DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
6148 pipe_name(pipe), pipe_config->fdi_lanes);
6152 other_crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_B);
6154 intel_atomic_get_crtc_state(state, other_crtc);
6155 if (IS_ERR(other_crtc_state))
6156 return PTR_ERR(other_crtc_state);
6158 if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
6159 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
6169 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
6170 struct intel_crtc_state *pipe_config)
6172 struct drm_device *dev = intel_crtc->base.dev;
6173 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6174 int lane, link_bw, fdi_dotclock, ret;
6175 bool needs_recompute = false;
6178 /* FDI is a binary signal running at ~2.7GHz, encoding
6179 * each output octet as 10 bits. The actual frequency
6180 * is stored as a divider into a 100MHz clock, and the
6181 * mode pixel clock is stored in units of 1KHz.
6182 * Hence the bw of each lane in terms of the mode signal
6185 link_bw = intel_fdi_link_freq(to_i915(dev), pipe_config);
6187 fdi_dotclock = adjusted_mode->crtc_clock;
6189 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
6190 pipe_config->pipe_bpp);
6192 pipe_config->fdi_lanes = lane;
6194 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
6195 link_bw, &pipe_config->fdi_m_n, false);
6197 ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
6198 if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
6199 pipe_config->pipe_bpp -= 2*3;
6200 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
6201 pipe_config->pipe_bpp);
6202 needs_recompute = true;
6203 pipe_config->bw_constrained = true;
6208 if (needs_recompute)
6214 static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
6215 struct intel_crtc_state *pipe_config)
6217 if (pipe_config->ips_force_disable)
6220 if (pipe_config->pipe_bpp > 24)
6223 /* HSW can handle pixel rate up to cdclk? */
6224 if (IS_HASWELL(dev_priv))
6228 * We compare against max which means we must take
6229 * the increased cdclk requirement into account when
6230 * calculating the new cdclk.
6232 * Should measure whether using a lower cdclk w/o IPS
6234 return pipe_config->pixel_rate <=
6235 dev_priv->max_cdclk_freq * 95 / 100;
6238 static void hsw_compute_ips_config(struct intel_crtc *crtc,
6239 struct intel_crtc_state *pipe_config)
6241 struct drm_device *dev = crtc->base.dev;
6242 struct drm_i915_private *dev_priv = to_i915(dev);
6244 pipe_config->ips_enabled = i915_modparams.enable_ips &&
6245 hsw_crtc_supports_ips(crtc) &&
6246 pipe_config_supports_ips(dev_priv, pipe_config);
6249 static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
6251 const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6253 /* GDG double wide on either pipe, otherwise pipe A only */
6254 return INTEL_INFO(dev_priv)->gen < 4 &&
6255 (crtc->pipe == PIPE_A || IS_I915G(dev_priv));
6258 static uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)
6260 uint32_t pixel_rate;
6262 pixel_rate = pipe_config->base.adjusted_mode.crtc_clock;
6265 * We only use IF-ID interlacing. If we ever use
6266 * PF-ID we'll need to adjust the pixel_rate here.
6269 if (pipe_config->pch_pfit.enabled) {
6270 uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
6271 uint32_t pfit_size = pipe_config->pch_pfit.size;
6273 pipe_w = pipe_config->pipe_src_w;
6274 pipe_h = pipe_config->pipe_src_h;
6276 pfit_w = (pfit_size >> 16) & 0xFFFF;
6277 pfit_h = pfit_size & 0xFFFF;
6278 if (pipe_w < pfit_w)
6280 if (pipe_h < pfit_h)
6283 if (WARN_ON(!pfit_w || !pfit_h))
6286 pixel_rate = div_u64((uint64_t) pixel_rate * pipe_w * pipe_h,
6293 static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
6295 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
6297 if (HAS_GMCH_DISPLAY(dev_priv))
6298 /* FIXME calculate proper pipe pixel rate for GMCH pfit */
6299 crtc_state->pixel_rate =
6300 crtc_state->base.adjusted_mode.crtc_clock;
6302 crtc_state->pixel_rate =
6303 ilk_pipe_pixel_rate(crtc_state);
6306 static int intel_crtc_compute_config(struct intel_crtc *crtc,
6307 struct intel_crtc_state *pipe_config)
6309 struct drm_device *dev = crtc->base.dev;
6310 struct drm_i915_private *dev_priv = to_i915(dev);
6311 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6312 int clock_limit = dev_priv->max_dotclk_freq;
6314 if (INTEL_GEN(dev_priv) < 4) {
6315 clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
6318 * Enable double wide mode when the dot clock
6319 * is > 90% of the (display) core speed.
6321 if (intel_crtc_supports_double_wide(crtc) &&
6322 adjusted_mode->crtc_clock > clock_limit) {
6323 clock_limit = dev_priv->max_dotclk_freq;
6324 pipe_config->double_wide = true;
6328 if (adjusted_mode->crtc_clock > clock_limit) {
6329 DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
6330 adjusted_mode->crtc_clock, clock_limit,
6331 yesno(pipe_config->double_wide));
6335 if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
6337 * There is only one pipe CSC unit per pipe, and we need that
6338 * for output conversion from RGB->YCBCR. So if CTM is already
6339 * applied we can't support YCBCR420 output.
6341 DRM_DEBUG_KMS("YCBCR420 and CTM together are not possible\n");
6346 * Pipe horizontal size must be even in:
6348 * - LVDS dual channel mode
6349 * - Double wide pipe
6351 if ((intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) &&
6352 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
6353 pipe_config->pipe_src_w &= ~1;
6355 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
6356 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
6358 if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
6359 adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
6362 intel_crtc_compute_pixel_rate(pipe_config);
6364 if (HAS_IPS(dev_priv))
6365 hsw_compute_ips_config(crtc, pipe_config);
6367 if (pipe_config->has_pch_encoder)
6368 return ironlake_fdi_compute_config(crtc, pipe_config);
6374 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
6376 while (*num > DATA_LINK_M_N_MASK ||
6377 *den > DATA_LINK_M_N_MASK) {
6383 static void compute_m_n(unsigned int m, unsigned int n,
6384 uint32_t *ret_m, uint32_t *ret_n,
6388 * Reduce M/N as much as possible without loss in precision. Several DP
6389 * dongles in particular seem to be fussy about too large *link* M/N
6390 * values. The passed in values are more likely to have the least
6391 * significant bits zero than M after rounding below, so do this first.
6394 while ((m & 1) == 0 && (n & 1) == 0) {
6400 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
6401 *ret_m = div_u64((uint64_t) m * *ret_n, n);
6402 intel_reduce_m_n_ratio(ret_m, ret_n);
6406 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
6407 int pixel_clock, int link_clock,
6408 struct intel_link_m_n *m_n,
6413 compute_m_n(bits_per_pixel * pixel_clock,
6414 link_clock * nlanes * 8,
6415 &m_n->gmch_m, &m_n->gmch_n,
6418 compute_m_n(pixel_clock, link_clock,
6419 &m_n->link_m, &m_n->link_n,
6423 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
6425 if (i915_modparams.panel_use_ssc >= 0)
6426 return i915_modparams.panel_use_ssc != 0;
6427 return dev_priv->vbt.lvds_use_ssc
6428 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
6431 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
6433 return (1 << dpll->n) << 16 | dpll->m2;
6436 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
6438 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
6441 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
6442 struct intel_crtc_state *crtc_state,
6443 struct dpll *reduced_clock)
6445 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6448 if (IS_PINEVIEW(dev_priv)) {
6449 fp = pnv_dpll_compute_fp(&crtc_state->dpll);
6451 fp2 = pnv_dpll_compute_fp(reduced_clock);
6453 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
6455 fp2 = i9xx_dpll_compute_fp(reduced_clock);
6458 crtc_state->dpll_hw_state.fp0 = fp;
6460 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
6462 crtc_state->dpll_hw_state.fp1 = fp2;
6464 crtc_state->dpll_hw_state.fp1 = fp;
6468 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
6474 * PLLB opamp always calibrates to max value of 0x3f, force enable it
6475 * and set it to a reasonable value instead.
6477 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
6478 reg_val &= 0xffffff00;
6479 reg_val |= 0x00000030;
6480 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
6482 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
6483 reg_val &= 0x00ffffff;
6484 reg_val |= 0x8c000000;
6485 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
6487 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
6488 reg_val &= 0xffffff00;
6489 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
6491 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
6492 reg_val &= 0x00ffffff;
6493 reg_val |= 0xb0000000;
6494 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
6497 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
6498 struct intel_link_m_n *m_n)
6500 struct drm_device *dev = crtc->base.dev;
6501 struct drm_i915_private *dev_priv = to_i915(dev);
6502 int pipe = crtc->pipe;
6504 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
6505 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
6506 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
6507 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
6510 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
6511 struct intel_link_m_n *m_n,
6512 struct intel_link_m_n *m2_n2)
6514 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6515 int pipe = crtc->pipe;
6516 enum transcoder transcoder = crtc->config->cpu_transcoder;
6518 if (INTEL_GEN(dev_priv) >= 5) {
6519 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
6520 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
6521 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
6522 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
6523 /* M2_N2 registers to be set only for gen < 8 (M2_N2 available
6524 * for gen < 8) and if DRRS is supported (to make sure the
6525 * registers are not unnecessarily accessed).
6527 if (m2_n2 && (IS_CHERRYVIEW(dev_priv) ||
6528 INTEL_GEN(dev_priv) < 8) && crtc->config->has_drrs) {
6529 I915_WRITE(PIPE_DATA_M2(transcoder),
6530 TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
6531 I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
6532 I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
6533 I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
6536 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
6537 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
6538 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
6539 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
6543 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
6545 struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
6548 dp_m_n = &crtc->config->dp_m_n;
6549 dp_m2_n2 = &crtc->config->dp_m2_n2;
6550 } else if (m_n == M2_N2) {
6553 * M2_N2 registers are not supported. Hence m2_n2 divider value
6554 * needs to be programmed into M1_N1.
6556 dp_m_n = &crtc->config->dp_m2_n2;
6558 DRM_ERROR("Unsupported divider value\n");
6562 if (crtc->config->has_pch_encoder)
6563 intel_pch_transcoder_set_m_n(crtc, &crtc->config->dp_m_n);
6565 intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
6568 static void vlv_compute_dpll(struct intel_crtc *crtc,
6569 struct intel_crtc_state *pipe_config)
6571 pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
6572 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
6573 if (crtc->pipe != PIPE_A)
6574 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
6576 /* DPLL not used with DSI, but still need the rest set up */
6577 if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
6578 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
6579 DPLL_EXT_BUFFER_ENABLE_VLV;
6581 pipe_config->dpll_hw_state.dpll_md =
6582 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
6585 static void chv_compute_dpll(struct intel_crtc *crtc,
6586 struct intel_crtc_state *pipe_config)
6588 pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
6589 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
6590 if (crtc->pipe != PIPE_A)
6591 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
6593 /* DPLL not used with DSI, but still need the rest set up */
6594 if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
6595 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
6597 pipe_config->dpll_hw_state.dpll_md =
6598 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
6601 static void vlv_prepare_pll(struct intel_crtc *crtc,
6602 const struct intel_crtc_state *pipe_config)
6604 struct drm_device *dev = crtc->base.dev;
6605 struct drm_i915_private *dev_priv = to_i915(dev);
6606 enum pipe pipe = crtc->pipe;
6608 u32 bestn, bestm1, bestm2, bestp1, bestp2;
6609 u32 coreclk, reg_val;
6612 I915_WRITE(DPLL(pipe),
6613 pipe_config->dpll_hw_state.dpll &
6614 ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
6616 /* No need to actually set up the DPLL with DSI */
6617 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
6620 mutex_lock(&dev_priv->sb_lock);
6622 bestn = pipe_config->dpll.n;
6623 bestm1 = pipe_config->dpll.m1;
6624 bestm2 = pipe_config->dpll.m2;
6625 bestp1 = pipe_config->dpll.p1;
6626 bestp2 = pipe_config->dpll.p2;
6628 /* See eDP HDMI DPIO driver vbios notes doc */
6630 /* PLL B needs special handling */
6632 vlv_pllb_recal_opamp(dev_priv, pipe);
6634 /* Set up Tx target for periodic Rcomp update */
6635 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
6637 /* Disable target IRef on PLL */
6638 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
6639 reg_val &= 0x00ffffff;
6640 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
6642 /* Disable fast lock */
6643 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
6645 /* Set idtafcrecal before PLL is enabled */
6646 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
6647 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
6648 mdiv |= ((bestn << DPIO_N_SHIFT));
6649 mdiv |= (1 << DPIO_K_SHIFT);
6652 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
6653 * but we don't support that).
6654 * Note: don't use the DAC post divider as it seems unstable.
6656 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
6657 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
6659 mdiv |= DPIO_ENABLE_CALIBRATION;
6660 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
6662 /* Set HBR and RBR LPF coefficients */
6663 if (pipe_config->port_clock == 162000 ||
6664 intel_crtc_has_type(crtc->config, INTEL_OUTPUT_ANALOG) ||
6665 intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
6666 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
6669 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
6672 if (intel_crtc_has_dp_encoder(pipe_config)) {
6673 /* Use SSC source */
6675 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
6678 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
6680 } else { /* HDMI or VGA */
6681 /* Use bend source */
6683 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
6686 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
6690 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
6691 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
6692 if (intel_crtc_has_dp_encoder(crtc->config))
6693 coreclk |= 0x01000000;
6694 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
6696 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
6697 mutex_unlock(&dev_priv->sb_lock);
6700 static void chv_prepare_pll(struct intel_crtc *crtc,
6701 const struct intel_crtc_state *pipe_config)
6703 struct drm_device *dev = crtc->base.dev;
6704 struct drm_i915_private *dev_priv = to_i915(dev);
6705 enum pipe pipe = crtc->pipe;
6706 enum dpio_channel port = vlv_pipe_to_channel(pipe);
6707 u32 loopfilter, tribuf_calcntr;
6708 u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
6712 /* Enable Refclk and SSC */
6713 I915_WRITE(DPLL(pipe),
6714 pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
6716 /* No need to actually set up the DPLL with DSI */
6717 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
6720 bestn = pipe_config->dpll.n;
6721 bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
6722 bestm1 = pipe_config->dpll.m1;
6723 bestm2 = pipe_config->dpll.m2 >> 22;
6724 bestp1 = pipe_config->dpll.p1;
6725 bestp2 = pipe_config->dpll.p2;
6726 vco = pipe_config->dpll.vco;
6730 mutex_lock(&dev_priv->sb_lock);
6732 /* p1 and p2 divider */
6733 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
6734 5 << DPIO_CHV_S1_DIV_SHIFT |
6735 bestp1 << DPIO_CHV_P1_DIV_SHIFT |
6736 bestp2 << DPIO_CHV_P2_DIV_SHIFT |
6737 1 << DPIO_CHV_K_DIV_SHIFT);
6739 /* Feedback post-divider - m2 */
6740 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
6742 /* Feedback refclk divider - n and m1 */
6743 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
6744 DPIO_CHV_M1_DIV_BY_2 |
6745 1 << DPIO_CHV_N_DIV_SHIFT);
6747 /* M2 fraction division */
6748 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
6750 /* M2 fraction division enable */
6751 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
6752 dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
6753 dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
6755 dpio_val |= DPIO_CHV_FRAC_DIV_EN;
6756 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
6758 /* Program digital lock detect threshold */
6759 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
6760 dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
6761 DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
6762 dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
6764 dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
6765 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
6768 if (vco == 5400000) {
6769 loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
6770 loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
6771 loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
6772 tribuf_calcntr = 0x9;
6773 } else if (vco <= 6200000) {
6774 loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
6775 loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
6776 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
6777 tribuf_calcntr = 0x9;
6778 } else if (vco <= 6480000) {
6779 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
6780 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
6781 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
6782 tribuf_calcntr = 0x8;
6784 /* Not supported. Apply the same limits as in the max case */
6785 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
6786 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
6787 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
6790 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
6792 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
6793 dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
6794 dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
6795 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
6798 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
6799 vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
6802 mutex_unlock(&dev_priv->sb_lock);
6806 * vlv_force_pll_on - forcibly enable just the PLL
6807 * @dev_priv: i915 private structure
6808 * @pipe: pipe PLL to enable
6809 * @dpll: PLL configuration
6811 * Enable the PLL for @pipe using the supplied @dpll config. To be used
6812 * in cases where we need the PLL enabled even when @pipe is not going to
6815 int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
6816 const struct dpll *dpll)
6818 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
6819 struct intel_crtc_state *pipe_config;
6821 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
6825 pipe_config->base.crtc = &crtc->base;
6826 pipe_config->pixel_multiplier = 1;
6827 pipe_config->dpll = *dpll;
6829 if (IS_CHERRYVIEW(dev_priv)) {
6830 chv_compute_dpll(crtc, pipe_config);
6831 chv_prepare_pll(crtc, pipe_config);
6832 chv_enable_pll(crtc, pipe_config);
6834 vlv_compute_dpll(crtc, pipe_config);
6835 vlv_prepare_pll(crtc, pipe_config);
6836 vlv_enable_pll(crtc, pipe_config);
6845 * vlv_force_pll_off - forcibly disable just the PLL
6846 * @dev_priv: i915 private structure
6847 * @pipe: pipe PLL to disable
6849 * Disable the PLL for @pipe. To be used in cases where we need
6850 * the PLL enabled even when @pipe is not going to be enabled.
6852 void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
6854 if (IS_CHERRYVIEW(dev_priv))
6855 chv_disable_pll(dev_priv, pipe);
6857 vlv_disable_pll(dev_priv, pipe);
6860 static void i9xx_compute_dpll(struct intel_crtc *crtc,
6861 struct intel_crtc_state *crtc_state,
6862 struct dpll *reduced_clock)
6864 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6866 struct dpll *clock = &crtc_state->dpll;
6868 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
6870 dpll = DPLL_VGA_MODE_DIS;
6872 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
6873 dpll |= DPLLB_MODE_LVDS;
6875 dpll |= DPLLB_MODE_DAC_SERIAL;
6877 if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
6878 IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
6879 dpll |= (crtc_state->pixel_multiplier - 1)
6880 << SDVO_MULTIPLIER_SHIFT_HIRES;
6883 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
6884 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
6885 dpll |= DPLL_SDVO_HIGH_SPEED;
6887 if (intel_crtc_has_dp_encoder(crtc_state))
6888 dpll |= DPLL_SDVO_HIGH_SPEED;
6890 /* compute bitmask from p1 value */
6891 if (IS_PINEVIEW(dev_priv))
6892 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
6894 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6895 if (IS_G4X(dev_priv) && reduced_clock)
6896 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
6898 switch (clock->p2) {
6900 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
6903 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
6906 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
6909 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
6912 if (INTEL_GEN(dev_priv) >= 4)
6913 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
6915 if (crtc_state->sdvo_tv_clock)
6916 dpll |= PLL_REF_INPUT_TVCLKINBC;
6917 else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
6918 intel_panel_use_ssc(dev_priv))
6919 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6921 dpll |= PLL_REF_INPUT_DREFCLK;
6923 dpll |= DPLL_VCO_ENABLE;
6924 crtc_state->dpll_hw_state.dpll = dpll;
6926 if (INTEL_GEN(dev_priv) >= 4) {
6927 u32 dpll_md = (crtc_state->pixel_multiplier - 1)
6928 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
6929 crtc_state->dpll_hw_state.dpll_md = dpll_md;
6933 static void i8xx_compute_dpll(struct intel_crtc *crtc,
6934 struct intel_crtc_state *crtc_state,
6935 struct dpll *reduced_clock)
6937 struct drm_device *dev = crtc->base.dev;
6938 struct drm_i915_private *dev_priv = to_i915(dev);
6940 struct dpll *clock = &crtc_state->dpll;
6942 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
6944 dpll = DPLL_VGA_MODE_DIS;
6946 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
6947 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6950 dpll |= PLL_P1_DIVIDE_BY_TWO;
6952 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6954 dpll |= PLL_P2_DIVIDE_BY_4;
6957 if (!IS_I830(dev_priv) &&
6958 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
6959 dpll |= DPLL_DVO_2X_MODE;
6961 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
6962 intel_panel_use_ssc(dev_priv))
6963 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6965 dpll |= PLL_REF_INPUT_DREFCLK;
6967 dpll |= DPLL_VCO_ENABLE;
6968 crtc_state->dpll_hw_state.dpll = dpll;
6971 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
6973 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
6974 enum pipe pipe = intel_crtc->pipe;
6975 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
6976 const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
6977 uint32_t crtc_vtotal, crtc_vblank_end;
6980 /* We need to be careful not to changed the adjusted mode, for otherwise
6981 * the hw state checker will get angry at the mismatch. */
6982 crtc_vtotal = adjusted_mode->crtc_vtotal;
6983 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
6985 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
6986 /* the chip adds 2 halflines automatically */
6988 crtc_vblank_end -= 1;
6990 if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_SDVO))
6991 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
6993 vsyncshift = adjusted_mode->crtc_hsync_start -
6994 adjusted_mode->crtc_htotal / 2;
6996 vsyncshift += adjusted_mode->crtc_htotal;
6999 if (INTEL_GEN(dev_priv) > 3)
7000 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
7002 I915_WRITE(HTOTAL(cpu_transcoder),
7003 (adjusted_mode->crtc_hdisplay - 1) |
7004 ((adjusted_mode->crtc_htotal - 1) << 16));
7005 I915_WRITE(HBLANK(cpu_transcoder),
7006 (adjusted_mode->crtc_hblank_start - 1) |
7007 ((adjusted_mode->crtc_hblank_end - 1) << 16));
7008 I915_WRITE(HSYNC(cpu_transcoder),
7009 (adjusted_mode->crtc_hsync_start - 1) |
7010 ((adjusted_mode->crtc_hsync_end - 1) << 16));
7012 I915_WRITE(VTOTAL(cpu_transcoder),
7013 (adjusted_mode->crtc_vdisplay - 1) |
7014 ((crtc_vtotal - 1) << 16));
7015 I915_WRITE(VBLANK(cpu_transcoder),
7016 (adjusted_mode->crtc_vblank_start - 1) |
7017 ((crtc_vblank_end - 1) << 16));
7018 I915_WRITE(VSYNC(cpu_transcoder),
7019 (adjusted_mode->crtc_vsync_start - 1) |
7020 ((adjusted_mode->crtc_vsync_end - 1) << 16));
7022 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
7023 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
7024 * documented on the DDI_FUNC_CTL register description, EDP Input Select
7026 if (IS_HASWELL(dev_priv) && cpu_transcoder == TRANSCODER_EDP &&
7027 (pipe == PIPE_B || pipe == PIPE_C))
7028 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
7032 static void intel_set_pipe_src_size(struct intel_crtc *intel_crtc)
7034 struct drm_device *dev = intel_crtc->base.dev;
7035 struct drm_i915_private *dev_priv = to_i915(dev);
7036 enum pipe pipe = intel_crtc->pipe;
7038 /* pipesrc controls the size that is scaled from, which should
7039 * always be the user's requested size.
7041 I915_WRITE(PIPESRC(pipe),
7042 ((intel_crtc->config->pipe_src_w - 1) << 16) |
7043 (intel_crtc->config->pipe_src_h - 1));
7046 static void intel_get_pipe_timings(struct intel_crtc *crtc,
7047 struct intel_crtc_state *pipe_config)
7049 struct drm_device *dev = crtc->base.dev;
7050 struct drm_i915_private *dev_priv = to_i915(dev);
7051 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
7054 tmp = I915_READ(HTOTAL(cpu_transcoder));
7055 pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
7056 pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
7057 tmp = I915_READ(HBLANK(cpu_transcoder));
7058 pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
7059 pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
7060 tmp = I915_READ(HSYNC(cpu_transcoder));
7061 pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
7062 pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
7064 tmp = I915_READ(VTOTAL(cpu_transcoder));
7065 pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
7066 pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
7067 tmp = I915_READ(VBLANK(cpu_transcoder));
7068 pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
7069 pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
7070 tmp = I915_READ(VSYNC(cpu_transcoder));
7071 pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
7072 pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
7074 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
7075 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
7076 pipe_config->base.adjusted_mode.crtc_vtotal += 1;
7077 pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
7081 static void intel_get_pipe_src_size(struct intel_crtc *crtc,
7082 struct intel_crtc_state *pipe_config)
7084 struct drm_device *dev = crtc->base.dev;
7085 struct drm_i915_private *dev_priv = to_i915(dev);
7088 tmp = I915_READ(PIPESRC(crtc->pipe));
7089 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
7090 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
7092 pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
7093 pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
7096 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
7097 struct intel_crtc_state *pipe_config)
7099 mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
7100 mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
7101 mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
7102 mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
7104 mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
7105 mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
7106 mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
7107 mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
7109 mode->flags = pipe_config->base.adjusted_mode.flags;
7110 mode->type = DRM_MODE_TYPE_DRIVER;
7112 mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
7114 mode->hsync = drm_mode_hsync(mode);
7115 mode->vrefresh = drm_mode_vrefresh(mode);
7116 drm_mode_set_name(mode);
7119 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
7121 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
7126 /* we keep both pipes enabled on 830 */
7127 if (IS_I830(dev_priv))
7128 pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
7130 if (intel_crtc->config->double_wide)
7131 pipeconf |= PIPECONF_DOUBLE_WIDE;
7133 /* only g4x and later have fancy bpc/dither controls */
7134 if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
7135 IS_CHERRYVIEW(dev_priv)) {
7136 /* Bspec claims that we can't use dithering for 30bpp pipes. */
7137 if (intel_crtc->config->dither && intel_crtc->config->pipe_bpp != 30)
7138 pipeconf |= PIPECONF_DITHER_EN |
7139 PIPECONF_DITHER_TYPE_SP;
7141 switch (intel_crtc->config->pipe_bpp) {
7143 pipeconf |= PIPECONF_6BPC;
7146 pipeconf |= PIPECONF_8BPC;
7149 pipeconf |= PIPECONF_10BPC;
7152 /* Case prevented by intel_choose_pipe_bpp_dither. */
7157 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
7158 if (INTEL_GEN(dev_priv) < 4 ||
7159 intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_SDVO))
7160 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
7162 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
7164 pipeconf |= PIPECONF_PROGRESSIVE;
7166 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
7167 intel_crtc->config->limited_color_range)
7168 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
7170 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
7171 POSTING_READ(PIPECONF(intel_crtc->pipe));
7174 static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
7175 struct intel_crtc_state *crtc_state)
7177 struct drm_device *dev = crtc->base.dev;
7178 struct drm_i915_private *dev_priv = to_i915(dev);
7179 const struct intel_limit *limit;
7182 memset(&crtc_state->dpll_hw_state, 0,
7183 sizeof(crtc_state->dpll_hw_state));
7185 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7186 if (intel_panel_use_ssc(dev_priv)) {
7187 refclk = dev_priv->vbt.lvds_ssc_freq;
7188 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7191 limit = &intel_limits_i8xx_lvds;
7192 } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
7193 limit = &intel_limits_i8xx_dvo;
7195 limit = &intel_limits_i8xx_dac;
7198 if (!crtc_state->clock_set &&
7199 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7200 refclk, NULL, &crtc_state->dpll)) {
7201 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7205 i8xx_compute_dpll(crtc, crtc_state, NULL);
7210 static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
7211 struct intel_crtc_state *crtc_state)
7213 struct drm_device *dev = crtc->base.dev;
7214 struct drm_i915_private *dev_priv = to_i915(dev);
7215 const struct intel_limit *limit;
7218 memset(&crtc_state->dpll_hw_state, 0,
7219 sizeof(crtc_state->dpll_hw_state));
7221 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7222 if (intel_panel_use_ssc(dev_priv)) {
7223 refclk = dev_priv->vbt.lvds_ssc_freq;
7224 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7227 if (intel_is_dual_link_lvds(dev))
7228 limit = &intel_limits_g4x_dual_channel_lvds;
7230 limit = &intel_limits_g4x_single_channel_lvds;
7231 } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
7232 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
7233 limit = &intel_limits_g4x_hdmi;
7234 } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
7235 limit = &intel_limits_g4x_sdvo;
7237 /* The option is for other outputs */
7238 limit = &intel_limits_i9xx_sdvo;
7241 if (!crtc_state->clock_set &&
7242 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7243 refclk, NULL, &crtc_state->dpll)) {
7244 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7248 i9xx_compute_dpll(crtc, crtc_state, NULL);
7253 static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
7254 struct intel_crtc_state *crtc_state)
7256 struct drm_device *dev = crtc->base.dev;
7257 struct drm_i915_private *dev_priv = to_i915(dev);
7258 const struct intel_limit *limit;
7261 memset(&crtc_state->dpll_hw_state, 0,
7262 sizeof(crtc_state->dpll_hw_state));
7264 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7265 if (intel_panel_use_ssc(dev_priv)) {
7266 refclk = dev_priv->vbt.lvds_ssc_freq;
7267 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7270 limit = &intel_limits_pineview_lvds;
7272 limit = &intel_limits_pineview_sdvo;
7275 if (!crtc_state->clock_set &&
7276 !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7277 refclk, NULL, &crtc_state->dpll)) {
7278 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7282 i9xx_compute_dpll(crtc, crtc_state, NULL);
7287 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
7288 struct intel_crtc_state *crtc_state)
7290 struct drm_device *dev = crtc->base.dev;
7291 struct drm_i915_private *dev_priv = to_i915(dev);
7292 const struct intel_limit *limit;
7295 memset(&crtc_state->dpll_hw_state, 0,
7296 sizeof(crtc_state->dpll_hw_state));
7298 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7299 if (intel_panel_use_ssc(dev_priv)) {
7300 refclk = dev_priv->vbt.lvds_ssc_freq;
7301 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7304 limit = &intel_limits_i9xx_lvds;
7306 limit = &intel_limits_i9xx_sdvo;
7309 if (!crtc_state->clock_set &&
7310 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7311 refclk, NULL, &crtc_state->dpll)) {
7312 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7316 i9xx_compute_dpll(crtc, crtc_state, NULL);
7321 static int chv_crtc_compute_clock(struct intel_crtc *crtc,
7322 struct intel_crtc_state *crtc_state)
7324 int refclk = 100000;
7325 const struct intel_limit *limit = &intel_limits_chv;
7327 memset(&crtc_state->dpll_hw_state, 0,
7328 sizeof(crtc_state->dpll_hw_state));
7330 if (!crtc_state->clock_set &&
7331 !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7332 refclk, NULL, &crtc_state->dpll)) {
7333 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7337 chv_compute_dpll(crtc, crtc_state);
7342 static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
7343 struct intel_crtc_state *crtc_state)
7345 int refclk = 100000;
7346 const struct intel_limit *limit = &intel_limits_vlv;
7348 memset(&crtc_state->dpll_hw_state, 0,
7349 sizeof(crtc_state->dpll_hw_state));
7351 if (!crtc_state->clock_set &&
7352 !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7353 refclk, NULL, &crtc_state->dpll)) {
7354 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7358 vlv_compute_dpll(crtc, crtc_state);
7363 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
7364 struct intel_crtc_state *pipe_config)
7366 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7369 if (INTEL_GEN(dev_priv) <= 3 &&
7370 (IS_I830(dev_priv) || !IS_MOBILE(dev_priv)))
7373 tmp = I915_READ(PFIT_CONTROL);
7374 if (!(tmp & PFIT_ENABLE))
7377 /* Check whether the pfit is attached to our pipe. */
7378 if (INTEL_GEN(dev_priv) < 4) {
7379 if (crtc->pipe != PIPE_B)
7382 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
7386 pipe_config->gmch_pfit.control = tmp;
7387 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
7390 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
7391 struct intel_crtc_state *pipe_config)
7393 struct drm_device *dev = crtc->base.dev;
7394 struct drm_i915_private *dev_priv = to_i915(dev);
7395 int pipe = pipe_config->cpu_transcoder;
7398 int refclk = 100000;
7400 /* In case of DSI, DPLL will not be used */
7401 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7404 mutex_lock(&dev_priv->sb_lock);
7405 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
7406 mutex_unlock(&dev_priv->sb_lock);
7408 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
7409 clock.m2 = mdiv & DPIO_M2DIV_MASK;
7410 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
7411 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
7412 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
7414 pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
7418 i9xx_get_initial_plane_config(struct intel_crtc *crtc,
7419 struct intel_initial_plane_config *plane_config)
7421 struct drm_device *dev = crtc->base.dev;
7422 struct drm_i915_private *dev_priv = to_i915(dev);
7423 u32 val, base, offset;
7424 int pipe = crtc->pipe, plane = crtc->plane;
7425 int fourcc, pixel_format;
7426 unsigned int aligned_height;
7427 struct drm_framebuffer *fb;
7428 struct intel_framebuffer *intel_fb;
7430 val = I915_READ(DSPCNTR(plane));
7431 if (!(val & DISPLAY_PLANE_ENABLE))
7434 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
7436 DRM_DEBUG_KMS("failed to alloc fb\n");
7440 fb = &intel_fb->base;
7444 if (INTEL_GEN(dev_priv) >= 4) {
7445 if (val & DISPPLANE_TILED) {
7446 plane_config->tiling = I915_TILING_X;
7447 fb->modifier = I915_FORMAT_MOD_X_TILED;
7451 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
7452 fourcc = i9xx_format_to_fourcc(pixel_format);
7453 fb->format = drm_format_info(fourcc);
7455 if (INTEL_GEN(dev_priv) >= 4) {
7456 if (plane_config->tiling)
7457 offset = I915_READ(DSPTILEOFF(plane));
7459 offset = I915_READ(DSPLINOFF(plane));
7460 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
7462 base = I915_READ(DSPADDR(plane));
7464 plane_config->base = base;
7466 val = I915_READ(PIPESRC(pipe));
7467 fb->width = ((val >> 16) & 0xfff) + 1;
7468 fb->height = ((val >> 0) & 0xfff) + 1;
7470 val = I915_READ(DSPSTRIDE(pipe));
7471 fb->pitches[0] = val & 0xffffffc0;
7473 aligned_height = intel_fb_align_height(fb, 0, fb->height);
7475 plane_config->size = fb->pitches[0] * aligned_height;
7477 DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
7478 pipe_name(pipe), plane, fb->width, fb->height,
7479 fb->format->cpp[0] * 8, base, fb->pitches[0],
7480 plane_config->size);
7482 plane_config->fb = intel_fb;
7485 static void chv_crtc_clock_get(struct intel_crtc *crtc,
7486 struct intel_crtc_state *pipe_config)
7488 struct drm_device *dev = crtc->base.dev;
7489 struct drm_i915_private *dev_priv = to_i915(dev);
7490 int pipe = pipe_config->cpu_transcoder;
7491 enum dpio_channel port = vlv_pipe_to_channel(pipe);
7493 u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
7494 int refclk = 100000;
7496 /* In case of DSI, DPLL will not be used */
7497 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7500 mutex_lock(&dev_priv->sb_lock);
7501 cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
7502 pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
7503 pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
7504 pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
7505 pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
7506 mutex_unlock(&dev_priv->sb_lock);
7508 clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
7509 clock.m2 = (pll_dw0 & 0xff) << 22;
7510 if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
7511 clock.m2 |= pll_dw2 & 0x3fffff;
7512 clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
7513 clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
7514 clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
7516 pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
7519 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
7520 struct intel_crtc_state *pipe_config)
7522 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7523 enum intel_display_power_domain power_domain;
7527 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
7528 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
7531 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
7532 pipe_config->shared_dpll = NULL;
7536 tmp = I915_READ(PIPECONF(crtc->pipe));
7537 if (!(tmp & PIPECONF_ENABLE))
7540 if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
7541 IS_CHERRYVIEW(dev_priv)) {
7542 switch (tmp & PIPECONF_BPC_MASK) {
7544 pipe_config->pipe_bpp = 18;
7547 pipe_config->pipe_bpp = 24;
7549 case PIPECONF_10BPC:
7550 pipe_config->pipe_bpp = 30;
7557 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
7558 (tmp & PIPECONF_COLOR_RANGE_SELECT))
7559 pipe_config->limited_color_range = true;
7561 if (INTEL_GEN(dev_priv) < 4)
7562 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
7564 intel_get_pipe_timings(crtc, pipe_config);
7565 intel_get_pipe_src_size(crtc, pipe_config);
7567 i9xx_get_pfit_config(crtc, pipe_config);
7569 if (INTEL_GEN(dev_priv) >= 4) {
7570 /* No way to read it out on pipes B and C */
7571 if (IS_CHERRYVIEW(dev_priv) && crtc->pipe != PIPE_A)
7572 tmp = dev_priv->chv_dpll_md[crtc->pipe];
7574 tmp = I915_READ(DPLL_MD(crtc->pipe));
7575 pipe_config->pixel_multiplier =
7576 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
7577 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
7578 pipe_config->dpll_hw_state.dpll_md = tmp;
7579 } else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
7580 IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
7581 tmp = I915_READ(DPLL(crtc->pipe));
7582 pipe_config->pixel_multiplier =
7583 ((tmp & SDVO_MULTIPLIER_MASK)
7584 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
7586 /* Note that on i915G/GM the pixel multiplier is in the sdvo
7587 * port and will be fixed up in the encoder->get_config
7589 pipe_config->pixel_multiplier = 1;
7591 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
7592 if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
7594 * DPLL_DVO_2X_MODE must be enabled for both DPLLs
7595 * on 830. Filter it out here so that we don't
7596 * report errors due to that.
7598 if (IS_I830(dev_priv))
7599 pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
7601 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
7602 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
7604 /* Mask out read-only status bits. */
7605 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
7606 DPLL_PORTC_READY_MASK |
7607 DPLL_PORTB_READY_MASK);
7610 if (IS_CHERRYVIEW(dev_priv))
7611 chv_crtc_clock_get(crtc, pipe_config);
7612 else if (IS_VALLEYVIEW(dev_priv))
7613 vlv_crtc_clock_get(crtc, pipe_config);
7615 i9xx_crtc_clock_get(crtc, pipe_config);
7618 * Normally the dotclock is filled in by the encoder .get_config()
7619 * but in case the pipe is enabled w/o any ports we need a sane
7622 pipe_config->base.adjusted_mode.crtc_clock =
7623 pipe_config->port_clock / pipe_config->pixel_multiplier;
7628 intel_display_power_put(dev_priv, power_domain);
7633 static void ironlake_init_pch_refclk(struct drm_i915_private *dev_priv)
7635 struct intel_encoder *encoder;
7638 bool has_lvds = false;
7639 bool has_cpu_edp = false;
7640 bool has_panel = false;
7641 bool has_ck505 = false;
7642 bool can_ssc = false;
7643 bool using_ssc_source = false;
7645 /* We need to take the global config into account */
7646 for_each_intel_encoder(&dev_priv->drm, encoder) {
7647 switch (encoder->type) {
7648 case INTEL_OUTPUT_LVDS:
7652 case INTEL_OUTPUT_EDP:
7654 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
7662 if (HAS_PCH_IBX(dev_priv)) {
7663 has_ck505 = dev_priv->vbt.display_clock_mode;
7664 can_ssc = has_ck505;
7670 /* Check if any DPLLs are using the SSC source */
7671 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
7672 u32 temp = I915_READ(PCH_DPLL(i));
7674 if (!(temp & DPLL_VCO_ENABLE))
7677 if ((temp & PLL_REF_INPUT_MASK) ==
7678 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
7679 using_ssc_source = true;
7684 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
7685 has_panel, has_lvds, has_ck505, using_ssc_source);
7687 /* Ironlake: try to setup display ref clock before DPLL
7688 * enabling. This is only under driver's control after
7689 * PCH B stepping, previous chipset stepping should be
7690 * ignoring this setting.
7692 val = I915_READ(PCH_DREF_CONTROL);
7694 /* As we must carefully and slowly disable/enable each source in turn,
7695 * compute the final state we want first and check if we need to
7696 * make any changes at all.
7699 final &= ~DREF_NONSPREAD_SOURCE_MASK;
7701 final |= DREF_NONSPREAD_CK505_ENABLE;
7703 final |= DREF_NONSPREAD_SOURCE_ENABLE;
7705 final &= ~DREF_SSC_SOURCE_MASK;
7706 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
7707 final &= ~DREF_SSC1_ENABLE;
7710 final |= DREF_SSC_SOURCE_ENABLE;
7712 if (intel_panel_use_ssc(dev_priv) && can_ssc)
7713 final |= DREF_SSC1_ENABLE;
7716 if (intel_panel_use_ssc(dev_priv) && can_ssc)
7717 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
7719 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
7721 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
7722 } else if (using_ssc_source) {
7723 final |= DREF_SSC_SOURCE_ENABLE;
7724 final |= DREF_SSC1_ENABLE;
7730 /* Always enable nonspread source */
7731 val &= ~DREF_NONSPREAD_SOURCE_MASK;
7734 val |= DREF_NONSPREAD_CK505_ENABLE;
7736 val |= DREF_NONSPREAD_SOURCE_ENABLE;
7739 val &= ~DREF_SSC_SOURCE_MASK;
7740 val |= DREF_SSC_SOURCE_ENABLE;
7742 /* SSC must be turned on before enabling the CPU output */
7743 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
7744 DRM_DEBUG_KMS("Using SSC on panel\n");
7745 val |= DREF_SSC1_ENABLE;
7747 val &= ~DREF_SSC1_ENABLE;
7749 /* Get SSC going before enabling the outputs */
7750 I915_WRITE(PCH_DREF_CONTROL, val);
7751 POSTING_READ(PCH_DREF_CONTROL);
7754 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
7756 /* Enable CPU source on CPU attached eDP */
7758 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
7759 DRM_DEBUG_KMS("Using SSC on eDP\n");
7760 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
7762 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
7764 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
7766 I915_WRITE(PCH_DREF_CONTROL, val);
7767 POSTING_READ(PCH_DREF_CONTROL);
7770 DRM_DEBUG_KMS("Disabling CPU source output\n");
7772 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
7774 /* Turn off CPU output */
7775 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
7777 I915_WRITE(PCH_DREF_CONTROL, val);
7778 POSTING_READ(PCH_DREF_CONTROL);
7781 if (!using_ssc_source) {
7782 DRM_DEBUG_KMS("Disabling SSC source\n");
7784 /* Turn off the SSC source */
7785 val &= ~DREF_SSC_SOURCE_MASK;
7786 val |= DREF_SSC_SOURCE_DISABLE;
7789 val &= ~DREF_SSC1_ENABLE;
7791 I915_WRITE(PCH_DREF_CONTROL, val);
7792 POSTING_READ(PCH_DREF_CONTROL);
7797 BUG_ON(val != final);
7800 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
7804 tmp = I915_READ(SOUTH_CHICKEN2);
7805 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
7806 I915_WRITE(SOUTH_CHICKEN2, tmp);
7808 if (wait_for_us(I915_READ(SOUTH_CHICKEN2) &
7809 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
7810 DRM_ERROR("FDI mPHY reset assert timeout\n");
7812 tmp = I915_READ(SOUTH_CHICKEN2);
7813 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
7814 I915_WRITE(SOUTH_CHICKEN2, tmp);
7816 if (wait_for_us((I915_READ(SOUTH_CHICKEN2) &
7817 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
7818 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
7821 /* WaMPhyProgramming:hsw */
7822 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
7826 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
7827 tmp &= ~(0xFF << 24);
7828 tmp |= (0x12 << 24);
7829 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
7831 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
7833 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
7835 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
7837 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
7839 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
7840 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
7841 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
7843 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
7844 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
7845 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
7847 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
7850 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
7852 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
7855 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
7857 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
7860 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
7862 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
7865 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
7867 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
7868 tmp &= ~(0xFF << 16);
7869 tmp |= (0x1C << 16);
7870 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
7872 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
7873 tmp &= ~(0xFF << 16);
7874 tmp |= (0x1C << 16);
7875 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
7877 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
7879 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
7881 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
7883 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
7885 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
7886 tmp &= ~(0xF << 28);
7888 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
7890 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
7891 tmp &= ~(0xF << 28);
7893 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
7896 /* Implements 3 different sequences from BSpec chapter "Display iCLK
7897 * Programming" based on the parameters passed:
7898 * - Sequence to enable CLKOUT_DP
7899 * - Sequence to enable CLKOUT_DP without spread
7900 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
7902 static void lpt_enable_clkout_dp(struct drm_i915_private *dev_priv,
7903 bool with_spread, bool with_fdi)
7907 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
7909 if (WARN(HAS_PCH_LPT_LP(dev_priv) &&
7910 with_fdi, "LP PCH doesn't have FDI\n"))
7913 mutex_lock(&dev_priv->sb_lock);
7915 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
7916 tmp &= ~SBI_SSCCTL_DISABLE;
7917 tmp |= SBI_SSCCTL_PATHALT;
7918 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
7923 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
7924 tmp &= ~SBI_SSCCTL_PATHALT;
7925 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
7928 lpt_reset_fdi_mphy(dev_priv);
7929 lpt_program_fdi_mphy(dev_priv);
7933 reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
7934 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
7935 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
7936 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
7938 mutex_unlock(&dev_priv->sb_lock);
7941 /* Sequence to disable CLKOUT_DP */
7942 static void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv)
7946 mutex_lock(&dev_priv->sb_lock);
7948 reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
7949 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
7950 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
7951 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
7953 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
7954 if (!(tmp & SBI_SSCCTL_DISABLE)) {
7955 if (!(tmp & SBI_SSCCTL_PATHALT)) {
7956 tmp |= SBI_SSCCTL_PATHALT;
7957 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
7960 tmp |= SBI_SSCCTL_DISABLE;
7961 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
7964 mutex_unlock(&dev_priv->sb_lock);
7967 #define BEND_IDX(steps) ((50 + (steps)) / 5)
7969 static const uint16_t sscdivintphase[] = {
7970 [BEND_IDX( 50)] = 0x3B23,
7971 [BEND_IDX( 45)] = 0x3B23,
7972 [BEND_IDX( 40)] = 0x3C23,
7973 [BEND_IDX( 35)] = 0x3C23,
7974 [BEND_IDX( 30)] = 0x3D23,
7975 [BEND_IDX( 25)] = 0x3D23,
7976 [BEND_IDX( 20)] = 0x3E23,
7977 [BEND_IDX( 15)] = 0x3E23,
7978 [BEND_IDX( 10)] = 0x3F23,
7979 [BEND_IDX( 5)] = 0x3F23,
7980 [BEND_IDX( 0)] = 0x0025,
7981 [BEND_IDX( -5)] = 0x0025,
7982 [BEND_IDX(-10)] = 0x0125,
7983 [BEND_IDX(-15)] = 0x0125,
7984 [BEND_IDX(-20)] = 0x0225,
7985 [BEND_IDX(-25)] = 0x0225,
7986 [BEND_IDX(-30)] = 0x0325,
7987 [BEND_IDX(-35)] = 0x0325,
7988 [BEND_IDX(-40)] = 0x0425,
7989 [BEND_IDX(-45)] = 0x0425,
7990 [BEND_IDX(-50)] = 0x0525,
7995 * steps -50 to 50 inclusive, in steps of 5
7996 * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
7997 * change in clock period = -(steps / 10) * 5.787 ps
7999 static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
8002 int idx = BEND_IDX(steps);
8004 if (WARN_ON(steps % 5 != 0))
8007 if (WARN_ON(idx >= ARRAY_SIZE(sscdivintphase)))
8010 mutex_lock(&dev_priv->sb_lock);
8012 if (steps % 10 != 0)
8016 intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);
8018 tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
8020 tmp |= sscdivintphase[idx];
8021 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);
8023 mutex_unlock(&dev_priv->sb_lock);
8028 static void lpt_init_pch_refclk(struct drm_i915_private *dev_priv)
8030 struct intel_encoder *encoder;
8031 bool has_vga = false;
8033 for_each_intel_encoder(&dev_priv->drm, encoder) {
8034 switch (encoder->type) {
8035 case INTEL_OUTPUT_ANALOG:
8044 lpt_bend_clkout_dp(dev_priv, 0);
8045 lpt_enable_clkout_dp(dev_priv, true, true);
8047 lpt_disable_clkout_dp(dev_priv);
8052 * Initialize reference clocks when the driver loads
8054 void intel_init_pch_refclk(struct drm_i915_private *dev_priv)
8056 if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))
8057 ironlake_init_pch_refclk(dev_priv);
8058 else if (HAS_PCH_LPT(dev_priv))
8059 lpt_init_pch_refclk(dev_priv);
8062 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
8064 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
8065 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8066 int pipe = intel_crtc->pipe;
8071 switch (intel_crtc->config->pipe_bpp) {
8073 val |= PIPECONF_6BPC;
8076 val |= PIPECONF_8BPC;
8079 val |= PIPECONF_10BPC;
8082 val |= PIPECONF_12BPC;
8085 /* Case prevented by intel_choose_pipe_bpp_dither. */
8089 if (intel_crtc->config->dither)
8090 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8092 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8093 val |= PIPECONF_INTERLACED_ILK;
8095 val |= PIPECONF_PROGRESSIVE;
8097 if (intel_crtc->config->limited_color_range)
8098 val |= PIPECONF_COLOR_RANGE_SELECT;
8100 I915_WRITE(PIPECONF(pipe), val);
8101 POSTING_READ(PIPECONF(pipe));
8104 static void haswell_set_pipeconf(struct drm_crtc *crtc)
8106 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
8107 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8108 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
8111 if (IS_HASWELL(dev_priv) && intel_crtc->config->dither)
8112 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8114 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8115 val |= PIPECONF_INTERLACED_ILK;
8117 val |= PIPECONF_PROGRESSIVE;
8119 I915_WRITE(PIPECONF(cpu_transcoder), val);
8120 POSTING_READ(PIPECONF(cpu_transcoder));
8123 static void haswell_set_pipemisc(struct drm_crtc *crtc)
8125 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
8126 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8127 struct intel_crtc_state *config = intel_crtc->config;
8129 if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
8132 switch (intel_crtc->config->pipe_bpp) {
8134 val |= PIPEMISC_DITHER_6_BPC;
8137 val |= PIPEMISC_DITHER_8_BPC;
8140 val |= PIPEMISC_DITHER_10_BPC;
8143 val |= PIPEMISC_DITHER_12_BPC;
8146 /* Case prevented by pipe_config_set_bpp. */
8150 if (intel_crtc->config->dither)
8151 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
8153 if (config->ycbcr420) {
8154 val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
8155 PIPEMISC_YUV420_ENABLE |
8156 PIPEMISC_YUV420_MODE_FULL_BLEND;
8159 I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
8163 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
8166 * Account for spread spectrum to avoid
8167 * oversubscribing the link. Max center spread
8168 * is 2.5%; use 5% for safety's sake.
8170 u32 bps = target_clock * bpp * 21 / 20;
8171 return DIV_ROUND_UP(bps, link_bw * 8);
8174 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
8176 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
8179 static void ironlake_compute_dpll(struct intel_crtc *intel_crtc,
8180 struct intel_crtc_state *crtc_state,
8181 struct dpll *reduced_clock)
8183 struct drm_crtc *crtc = &intel_crtc->base;
8184 struct drm_device *dev = crtc->dev;
8185 struct drm_i915_private *dev_priv = to_i915(dev);
8189 /* Enable autotuning of the PLL clock (if permissible) */
8191 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8192 if ((intel_panel_use_ssc(dev_priv) &&
8193 dev_priv->vbt.lvds_ssc_freq == 100000) ||
8194 (HAS_PCH_IBX(dev_priv) && intel_is_dual_link_lvds(dev)))
8196 } else if (crtc_state->sdvo_tv_clock)
8199 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
8201 if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
8204 if (reduced_clock) {
8205 fp2 = i9xx_dpll_compute_fp(reduced_clock);
8207 if (reduced_clock->m < factor * reduced_clock->n)
8215 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
8216 dpll |= DPLLB_MODE_LVDS;
8218 dpll |= DPLLB_MODE_DAC_SERIAL;
8220 dpll |= (crtc_state->pixel_multiplier - 1)
8221 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
8223 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
8224 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
8225 dpll |= DPLL_SDVO_HIGH_SPEED;
8227 if (intel_crtc_has_dp_encoder(crtc_state))
8228 dpll |= DPLL_SDVO_HIGH_SPEED;
8231 * The high speed IO clock is only really required for
8232 * SDVO/HDMI/DP, but we also enable it for CRT to make it
8233 * possible to share the DPLL between CRT and HDMI. Enabling
8234 * the clock needlessly does no real harm, except use up a
8235 * bit of power potentially.
8237 * We'll limit this to IVB with 3 pipes, since it has only two
8238 * DPLLs and so DPLL sharing is the only way to get three pipes
8239 * driving PCH ports at the same time. On SNB we could do this,
8240 * and potentially avoid enabling the second DPLL, but it's not
8241 * clear if it''s a win or loss power wise. No point in doing
8242 * this on ILK at all since it has a fixed DPLL<->pipe mapping.
8244 if (INTEL_INFO(dev_priv)->num_pipes == 3 &&
8245 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
8246 dpll |= DPLL_SDVO_HIGH_SPEED;
8248 /* compute bitmask from p1 value */
8249 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8251 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
8253 switch (crtc_state->dpll.p2) {
8255 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
8258 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
8261 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
8264 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
8268 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
8269 intel_panel_use_ssc(dev_priv))
8270 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
8272 dpll |= PLL_REF_INPUT_DREFCLK;
8274 dpll |= DPLL_VCO_ENABLE;
8276 crtc_state->dpll_hw_state.dpll = dpll;
8277 crtc_state->dpll_hw_state.fp0 = fp;
8278 crtc_state->dpll_hw_state.fp1 = fp2;
8281 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
8282 struct intel_crtc_state *crtc_state)
8284 struct drm_device *dev = crtc->base.dev;
8285 struct drm_i915_private *dev_priv = to_i915(dev);
8286 const struct intel_limit *limit;
8287 int refclk = 120000;
8289 memset(&crtc_state->dpll_hw_state, 0,
8290 sizeof(crtc_state->dpll_hw_state));
8292 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
8293 if (!crtc_state->has_pch_encoder)
8296 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8297 if (intel_panel_use_ssc(dev_priv)) {
8298 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
8299 dev_priv->vbt.lvds_ssc_freq);
8300 refclk = dev_priv->vbt.lvds_ssc_freq;
8303 if (intel_is_dual_link_lvds(dev)) {
8304 if (refclk == 100000)
8305 limit = &intel_limits_ironlake_dual_lvds_100m;
8307 limit = &intel_limits_ironlake_dual_lvds;
8309 if (refclk == 100000)
8310 limit = &intel_limits_ironlake_single_lvds_100m;
8312 limit = &intel_limits_ironlake_single_lvds;
8315 limit = &intel_limits_ironlake_dac;
8318 if (!crtc_state->clock_set &&
8319 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8320 refclk, NULL, &crtc_state->dpll)) {
8321 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8325 ironlake_compute_dpll(crtc, crtc_state, NULL);
8327 if (!intel_get_shared_dpll(crtc, crtc_state, NULL)) {
8328 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
8329 pipe_name(crtc->pipe));
8336 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
8337 struct intel_link_m_n *m_n)
8339 struct drm_device *dev = crtc->base.dev;
8340 struct drm_i915_private *dev_priv = to_i915(dev);
8341 enum pipe pipe = crtc->pipe;
8343 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
8344 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
8345 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
8347 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
8348 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
8349 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8352 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
8353 enum transcoder transcoder,
8354 struct intel_link_m_n *m_n,
8355 struct intel_link_m_n *m2_n2)
8357 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8358 enum pipe pipe = crtc->pipe;
8360 if (INTEL_GEN(dev_priv) >= 5) {
8361 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
8362 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
8363 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
8365 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
8366 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
8367 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8368 /* Read M2_N2 registers only for gen < 8 (M2_N2 available for
8369 * gen < 8) and if DRRS is supported (to make sure the
8370 * registers are not unnecessarily read).
8372 if (m2_n2 && INTEL_GEN(dev_priv) < 8 &&
8373 crtc->config->has_drrs) {
8374 m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
8375 m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
8376 m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
8378 m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
8379 m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
8380 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8383 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
8384 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
8385 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
8387 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
8388 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
8389 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8393 void intel_dp_get_m_n(struct intel_crtc *crtc,
8394 struct intel_crtc_state *pipe_config)
8396 if (pipe_config->has_pch_encoder)
8397 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
8399 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
8400 &pipe_config->dp_m_n,
8401 &pipe_config->dp_m2_n2);
8404 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
8405 struct intel_crtc_state *pipe_config)
8407 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
8408 &pipe_config->fdi_m_n, NULL);
8411 static void skylake_get_pfit_config(struct intel_crtc *crtc,
8412 struct intel_crtc_state *pipe_config)
8414 struct drm_device *dev = crtc->base.dev;
8415 struct drm_i915_private *dev_priv = to_i915(dev);
8416 struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
8417 uint32_t ps_ctrl = 0;
8421 /* find scaler attached to this pipe */
8422 for (i = 0; i < crtc->num_scalers; i++) {
8423 ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
8424 if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
8426 pipe_config->pch_pfit.enabled = true;
8427 pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
8428 pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
8433 scaler_state->scaler_id = id;
8435 scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
8437 scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
8442 skylake_get_initial_plane_config(struct intel_crtc *crtc,
8443 struct intel_initial_plane_config *plane_config)
8445 struct drm_device *dev = crtc->base.dev;
8446 struct drm_i915_private *dev_priv = to_i915(dev);
8447 u32 val, base, offset, stride_mult, tiling;
8448 int pipe = crtc->pipe;
8449 int fourcc, pixel_format;
8450 unsigned int aligned_height;
8451 struct drm_framebuffer *fb;
8452 struct intel_framebuffer *intel_fb;
8454 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8456 DRM_DEBUG_KMS("failed to alloc fb\n");
8460 fb = &intel_fb->base;
8464 val = I915_READ(PLANE_CTL(pipe, 0));
8465 if (!(val & PLANE_CTL_ENABLE))
8468 pixel_format = val & PLANE_CTL_FORMAT_MASK;
8469 fourcc = skl_format_to_fourcc(pixel_format,
8470 val & PLANE_CTL_ORDER_RGBX,
8471 val & PLANE_CTL_ALPHA_MASK);
8472 fb->format = drm_format_info(fourcc);
8474 tiling = val & PLANE_CTL_TILED_MASK;
8476 case PLANE_CTL_TILED_LINEAR:
8477 fb->modifier = DRM_FORMAT_MOD_LINEAR;
8479 case PLANE_CTL_TILED_X:
8480 plane_config->tiling = I915_TILING_X;
8481 fb->modifier = I915_FORMAT_MOD_X_TILED;
8483 case PLANE_CTL_TILED_Y:
8484 if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
8485 fb->modifier = I915_FORMAT_MOD_Y_TILED_CCS;
8487 fb->modifier = I915_FORMAT_MOD_Y_TILED;
8489 case PLANE_CTL_TILED_YF:
8490 if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
8491 fb->modifier = I915_FORMAT_MOD_Yf_TILED_CCS;
8493 fb->modifier = I915_FORMAT_MOD_Yf_TILED;
8496 MISSING_CASE(tiling);
8500 base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
8501 plane_config->base = base;
8503 offset = I915_READ(PLANE_OFFSET(pipe, 0));
8505 val = I915_READ(PLANE_SIZE(pipe, 0));
8506 fb->height = ((val >> 16) & 0xfff) + 1;
8507 fb->width = ((val >> 0) & 0x1fff) + 1;
8509 val = I915_READ(PLANE_STRIDE(pipe, 0));
8510 stride_mult = intel_fb_stride_alignment(fb, 0);
8511 fb->pitches[0] = (val & 0x3ff) * stride_mult;
8513 aligned_height = intel_fb_align_height(fb, 0, fb->height);
8515 plane_config->size = fb->pitches[0] * aligned_height;
8517 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8518 pipe_name(pipe), fb->width, fb->height,
8519 fb->format->cpp[0] * 8, base, fb->pitches[0],
8520 plane_config->size);
8522 plane_config->fb = intel_fb;
8529 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
8530 struct intel_crtc_state *pipe_config)
8532 struct drm_device *dev = crtc->base.dev;
8533 struct drm_i915_private *dev_priv = to_i915(dev);
8536 tmp = I915_READ(PF_CTL(crtc->pipe));
8538 if (tmp & PF_ENABLE) {
8539 pipe_config->pch_pfit.enabled = true;
8540 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
8541 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
8543 /* We currently do not free assignements of panel fitters on
8544 * ivb/hsw (since we don't use the higher upscaling modes which
8545 * differentiates them) so just WARN about this case for now. */
8546 if (IS_GEN7(dev_priv)) {
8547 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
8548 PF_PIPE_SEL_IVB(crtc->pipe));
8554 ironlake_get_initial_plane_config(struct intel_crtc *crtc,
8555 struct intel_initial_plane_config *plane_config)
8557 struct drm_device *dev = crtc->base.dev;
8558 struct drm_i915_private *dev_priv = to_i915(dev);
8559 u32 val, base, offset;
8560 int pipe = crtc->pipe;
8561 int fourcc, pixel_format;
8562 unsigned int aligned_height;
8563 struct drm_framebuffer *fb;
8564 struct intel_framebuffer *intel_fb;
8566 val = I915_READ(DSPCNTR(pipe));
8567 if (!(val & DISPLAY_PLANE_ENABLE))
8570 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8572 DRM_DEBUG_KMS("failed to alloc fb\n");
8576 fb = &intel_fb->base;
8580 if (INTEL_GEN(dev_priv) >= 4) {
8581 if (val & DISPPLANE_TILED) {
8582 plane_config->tiling = I915_TILING_X;
8583 fb->modifier = I915_FORMAT_MOD_X_TILED;
8587 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
8588 fourcc = i9xx_format_to_fourcc(pixel_format);
8589 fb->format = drm_format_info(fourcc);
8591 base = I915_READ(DSPSURF(pipe)) & 0xfffff000;
8592 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
8593 offset = I915_READ(DSPOFFSET(pipe));
8595 if (plane_config->tiling)
8596 offset = I915_READ(DSPTILEOFF(pipe));
8598 offset = I915_READ(DSPLINOFF(pipe));
8600 plane_config->base = base;
8602 val = I915_READ(PIPESRC(pipe));
8603 fb->width = ((val >> 16) & 0xfff) + 1;
8604 fb->height = ((val >> 0) & 0xfff) + 1;
8606 val = I915_READ(DSPSTRIDE(pipe));
8607 fb->pitches[0] = val & 0xffffffc0;
8609 aligned_height = intel_fb_align_height(fb, 0, fb->height);
8611 plane_config->size = fb->pitches[0] * aligned_height;
8613 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8614 pipe_name(pipe), fb->width, fb->height,
8615 fb->format->cpp[0] * 8, base, fb->pitches[0],
8616 plane_config->size);
8618 plane_config->fb = intel_fb;
8621 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
8622 struct intel_crtc_state *pipe_config)
8624 struct drm_device *dev = crtc->base.dev;
8625 struct drm_i915_private *dev_priv = to_i915(dev);
8626 enum intel_display_power_domain power_domain;
8630 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
8631 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
8634 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8635 pipe_config->shared_dpll = NULL;
8638 tmp = I915_READ(PIPECONF(crtc->pipe));
8639 if (!(tmp & PIPECONF_ENABLE))
8642 switch (tmp & PIPECONF_BPC_MASK) {
8644 pipe_config->pipe_bpp = 18;
8647 pipe_config->pipe_bpp = 24;
8649 case PIPECONF_10BPC:
8650 pipe_config->pipe_bpp = 30;
8652 case PIPECONF_12BPC:
8653 pipe_config->pipe_bpp = 36;
8659 if (tmp & PIPECONF_COLOR_RANGE_SELECT)
8660 pipe_config->limited_color_range = true;
8662 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
8663 struct intel_shared_dpll *pll;
8664 enum intel_dpll_id pll_id;
8666 pipe_config->has_pch_encoder = true;
8668 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
8669 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
8670 FDI_DP_PORT_WIDTH_SHIFT) + 1;
8672 ironlake_get_fdi_m_n_config(crtc, pipe_config);
8674 if (HAS_PCH_IBX(dev_priv)) {
8676 * The pipe->pch transcoder and pch transcoder->pll
8679 pll_id = (enum intel_dpll_id) crtc->pipe;
8681 tmp = I915_READ(PCH_DPLL_SEL);
8682 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
8683 pll_id = DPLL_ID_PCH_PLL_B;
8685 pll_id= DPLL_ID_PCH_PLL_A;
8688 pipe_config->shared_dpll =
8689 intel_get_shared_dpll_by_id(dev_priv, pll_id);
8690 pll = pipe_config->shared_dpll;
8692 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
8693 &pipe_config->dpll_hw_state));
8695 tmp = pipe_config->dpll_hw_state.dpll;
8696 pipe_config->pixel_multiplier =
8697 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
8698 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
8700 ironlake_pch_clock_get(crtc, pipe_config);
8702 pipe_config->pixel_multiplier = 1;
8705 intel_get_pipe_timings(crtc, pipe_config);
8706 intel_get_pipe_src_size(crtc, pipe_config);
8708 ironlake_get_pfit_config(crtc, pipe_config);
8713 intel_display_power_put(dev_priv, power_domain);
8718 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
8720 struct drm_device *dev = &dev_priv->drm;
8721 struct intel_crtc *crtc;
8723 for_each_intel_crtc(dev, crtc)
8724 I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
8725 pipe_name(crtc->pipe));
8727 I915_STATE_WARN(I915_READ(HSW_PWR_WELL_CTL_DRIVER(HSW_DISP_PW_GLOBAL)),
8728 "Display power well on\n");
8729 I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
8730 I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
8731 I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
8732 I915_STATE_WARN(I915_READ(PP_STATUS(0)) & PP_ON, "Panel power on\n");
8733 I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
8734 "CPU PWM1 enabled\n");
8735 if (IS_HASWELL(dev_priv))
8736 I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
8737 "CPU PWM2 enabled\n");
8738 I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
8739 "PCH PWM1 enabled\n");
8740 I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
8741 "Utility pin enabled\n");
8742 I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
8745 * In theory we can still leave IRQs enabled, as long as only the HPD
8746 * interrupts remain enabled. We used to check for that, but since it's
8747 * gen-specific and since we only disable LCPLL after we fully disable
8748 * the interrupts, the check below should be enough.
8750 I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
8753 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
8755 if (IS_HASWELL(dev_priv))
8756 return I915_READ(D_COMP_HSW);
8758 return I915_READ(D_COMP_BDW);
8761 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
8763 if (IS_HASWELL(dev_priv)) {
8764 mutex_lock(&dev_priv->pcu_lock);
8765 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
8767 DRM_DEBUG_KMS("Failed to write to D_COMP\n");
8768 mutex_unlock(&dev_priv->pcu_lock);
8770 I915_WRITE(D_COMP_BDW, val);
8771 POSTING_READ(D_COMP_BDW);
8776 * This function implements pieces of two sequences from BSpec:
8777 * - Sequence for display software to disable LCPLL
8778 * - Sequence for display software to allow package C8+
8779 * The steps implemented here are just the steps that actually touch the LCPLL
8780 * register. Callers should take care of disabling all the display engine
8781 * functions, doing the mode unset, fixing interrupts, etc.
8783 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
8784 bool switch_to_fclk, bool allow_power_down)
8788 assert_can_disable_lcpll(dev_priv);
8790 val = I915_READ(LCPLL_CTL);
8792 if (switch_to_fclk) {
8793 val |= LCPLL_CD_SOURCE_FCLK;
8794 I915_WRITE(LCPLL_CTL, val);
8796 if (wait_for_us(I915_READ(LCPLL_CTL) &
8797 LCPLL_CD_SOURCE_FCLK_DONE, 1))
8798 DRM_ERROR("Switching to FCLK failed\n");
8800 val = I915_READ(LCPLL_CTL);
8803 val |= LCPLL_PLL_DISABLE;
8804 I915_WRITE(LCPLL_CTL, val);
8805 POSTING_READ(LCPLL_CTL);
8807 if (intel_wait_for_register(dev_priv, LCPLL_CTL, LCPLL_PLL_LOCK, 0, 1))
8808 DRM_ERROR("LCPLL still locked\n");
8810 val = hsw_read_dcomp(dev_priv);
8811 val |= D_COMP_COMP_DISABLE;
8812 hsw_write_dcomp(dev_priv, val);
8815 if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
8817 DRM_ERROR("D_COMP RCOMP still in progress\n");
8819 if (allow_power_down) {
8820 val = I915_READ(LCPLL_CTL);
8821 val |= LCPLL_POWER_DOWN_ALLOW;
8822 I915_WRITE(LCPLL_CTL, val);
8823 POSTING_READ(LCPLL_CTL);
8828 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
8831 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
8835 val = I915_READ(LCPLL_CTL);
8837 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
8838 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
8842 * Make sure we're not on PC8 state before disabling PC8, otherwise
8843 * we'll hang the machine. To prevent PC8 state, just enable force_wake.
8845 intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
8847 if (val & LCPLL_POWER_DOWN_ALLOW) {
8848 val &= ~LCPLL_POWER_DOWN_ALLOW;
8849 I915_WRITE(LCPLL_CTL, val);
8850 POSTING_READ(LCPLL_CTL);
8853 val = hsw_read_dcomp(dev_priv);
8854 val |= D_COMP_COMP_FORCE;
8855 val &= ~D_COMP_COMP_DISABLE;
8856 hsw_write_dcomp(dev_priv, val);
8858 val = I915_READ(LCPLL_CTL);
8859 val &= ~LCPLL_PLL_DISABLE;
8860 I915_WRITE(LCPLL_CTL, val);
8862 if (intel_wait_for_register(dev_priv,
8863 LCPLL_CTL, LCPLL_PLL_LOCK, LCPLL_PLL_LOCK,
8865 DRM_ERROR("LCPLL not locked yet\n");
8867 if (val & LCPLL_CD_SOURCE_FCLK) {
8868 val = I915_READ(LCPLL_CTL);
8869 val &= ~LCPLL_CD_SOURCE_FCLK;
8870 I915_WRITE(LCPLL_CTL, val);
8872 if (wait_for_us((I915_READ(LCPLL_CTL) &
8873 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
8874 DRM_ERROR("Switching back to LCPLL failed\n");
8877 intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
8878 intel_update_cdclk(dev_priv);
8882 * Package states C8 and deeper are really deep PC states that can only be
8883 * reached when all the devices on the system allow it, so even if the graphics
8884 * device allows PC8+, it doesn't mean the system will actually get to these
8885 * states. Our driver only allows PC8+ when going into runtime PM.
8887 * The requirements for PC8+ are that all the outputs are disabled, the power
8888 * well is disabled and most interrupts are disabled, and these are also
8889 * requirements for runtime PM. When these conditions are met, we manually do
8890 * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
8891 * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
8894 * When we really reach PC8 or deeper states (not just when we allow it) we lose
8895 * the state of some registers, so when we come back from PC8+ we need to
8896 * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
8897 * need to take care of the registers kept by RC6. Notice that this happens even
8898 * if we don't put the device in PCI D3 state (which is what currently happens
8899 * because of the runtime PM support).
8901 * For more, read "Display Sequences for Package C8" on the hardware
8904 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
8908 DRM_DEBUG_KMS("Enabling package C8+\n");
8910 if (HAS_PCH_LPT_LP(dev_priv)) {
8911 val = I915_READ(SOUTH_DSPCLK_GATE_D);
8912 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
8913 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
8916 lpt_disable_clkout_dp(dev_priv);
8917 hsw_disable_lcpll(dev_priv, true, true);
8920 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
8924 DRM_DEBUG_KMS("Disabling package C8+\n");
8926 hsw_restore_lcpll(dev_priv);
8927 lpt_init_pch_refclk(dev_priv);
8929 if (HAS_PCH_LPT_LP(dev_priv)) {
8930 val = I915_READ(SOUTH_DSPCLK_GATE_D);
8931 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
8932 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
8936 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
8937 struct intel_crtc_state *crtc_state)
8939 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) {
8940 struct intel_encoder *encoder =
8941 intel_ddi_get_crtc_new_encoder(crtc_state);
8943 if (!intel_get_shared_dpll(crtc, crtc_state, encoder)) {
8944 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
8945 pipe_name(crtc->pipe));
8953 static void cannonlake_get_ddi_pll(struct drm_i915_private *dev_priv,
8955 struct intel_crtc_state *pipe_config)
8957 enum intel_dpll_id id;
8960 temp = I915_READ(DPCLKA_CFGCR0) & DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
8961 id = temp >> DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port);
8963 if (WARN_ON(id < SKL_DPLL0 || id > SKL_DPLL2))
8966 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
8969 static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
8971 struct intel_crtc_state *pipe_config)
8973 enum intel_dpll_id id;
8977 id = DPLL_ID_SKL_DPLL0;
8980 id = DPLL_ID_SKL_DPLL1;
8983 id = DPLL_ID_SKL_DPLL2;
8986 DRM_ERROR("Incorrect port type\n");
8990 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
8993 static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
8995 struct intel_crtc_state *pipe_config)
8997 enum intel_dpll_id id;
9000 temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
9001 id = temp >> (port * 3 + 1);
9003 if (WARN_ON(id < SKL_DPLL0 || id > SKL_DPLL3))
9006 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9009 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
9011 struct intel_crtc_state *pipe_config)
9013 enum intel_dpll_id id;
9014 uint32_t ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
9016 switch (ddi_pll_sel) {
9017 case PORT_CLK_SEL_WRPLL1:
9018 id = DPLL_ID_WRPLL1;
9020 case PORT_CLK_SEL_WRPLL2:
9021 id = DPLL_ID_WRPLL2;
9023 case PORT_CLK_SEL_SPLL:
9026 case PORT_CLK_SEL_LCPLL_810:
9027 id = DPLL_ID_LCPLL_810;
9029 case PORT_CLK_SEL_LCPLL_1350:
9030 id = DPLL_ID_LCPLL_1350;
9032 case PORT_CLK_SEL_LCPLL_2700:
9033 id = DPLL_ID_LCPLL_2700;
9036 MISSING_CASE(ddi_pll_sel);
9038 case PORT_CLK_SEL_NONE:
9042 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9045 static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
9046 struct intel_crtc_state *pipe_config,
9047 u64 *power_domain_mask)
9049 struct drm_device *dev = crtc->base.dev;
9050 struct drm_i915_private *dev_priv = to_i915(dev);
9051 enum intel_display_power_domain power_domain;
9055 * The pipe->transcoder mapping is fixed with the exception of the eDP
9056 * transcoder handled below.
9058 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9061 * XXX: Do intel_display_power_get_if_enabled before reading this (for
9062 * consistency and less surprising code; it's in always on power).
9064 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
9065 if (tmp & TRANS_DDI_FUNC_ENABLE) {
9066 enum pipe trans_edp_pipe;
9067 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
9069 WARN(1, "unknown pipe linked to edp transcoder\n");
9070 case TRANS_DDI_EDP_INPUT_A_ONOFF:
9071 case TRANS_DDI_EDP_INPUT_A_ON:
9072 trans_edp_pipe = PIPE_A;
9074 case TRANS_DDI_EDP_INPUT_B_ONOFF:
9075 trans_edp_pipe = PIPE_B;
9077 case TRANS_DDI_EDP_INPUT_C_ONOFF:
9078 trans_edp_pipe = PIPE_C;
9082 if (trans_edp_pipe == crtc->pipe)
9083 pipe_config->cpu_transcoder = TRANSCODER_EDP;
9086 power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
9087 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9089 *power_domain_mask |= BIT_ULL(power_domain);
9091 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
9093 return tmp & PIPECONF_ENABLE;
9096 static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
9097 struct intel_crtc_state *pipe_config,
9098 u64 *power_domain_mask)
9100 struct drm_device *dev = crtc->base.dev;
9101 struct drm_i915_private *dev_priv = to_i915(dev);
9102 enum intel_display_power_domain power_domain;
9104 enum transcoder cpu_transcoder;
9107 for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
9109 cpu_transcoder = TRANSCODER_DSI_A;
9111 cpu_transcoder = TRANSCODER_DSI_C;
9113 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
9114 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9116 *power_domain_mask |= BIT_ULL(power_domain);
9119 * The PLL needs to be enabled with a valid divider
9120 * configuration, otherwise accessing DSI registers will hang
9121 * the machine. See BSpec North Display Engine
9122 * registers/MIPI[BXT]. We can break out here early, since we
9123 * need the same DSI PLL to be enabled for both DSI ports.
9125 if (!intel_dsi_pll_is_enabled(dev_priv))
9128 /* XXX: this works for video mode only */
9129 tmp = I915_READ(BXT_MIPI_PORT_CTRL(port));
9130 if (!(tmp & DPI_ENABLE))
9133 tmp = I915_READ(MIPI_CTRL(port));
9134 if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
9137 pipe_config->cpu_transcoder = cpu_transcoder;
9141 return transcoder_is_dsi(pipe_config->cpu_transcoder);
9144 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
9145 struct intel_crtc_state *pipe_config)
9147 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9148 struct intel_shared_dpll *pll;
9152 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
9154 port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
9156 if (IS_CANNONLAKE(dev_priv))
9157 cannonlake_get_ddi_pll(dev_priv, port, pipe_config);
9158 else if (IS_GEN9_BC(dev_priv))
9159 skylake_get_ddi_pll(dev_priv, port, pipe_config);
9160 else if (IS_GEN9_LP(dev_priv))
9161 bxt_get_ddi_pll(dev_priv, port, pipe_config);
9163 haswell_get_ddi_pll(dev_priv, port, pipe_config);
9165 pll = pipe_config->shared_dpll;
9167 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
9168 &pipe_config->dpll_hw_state));
9172 * Haswell has only FDI/PCH transcoder A. It is which is connected to
9173 * DDI E. So just check whether this pipe is wired to DDI E and whether
9174 * the PCH transcoder is on.
9176 if (INTEL_GEN(dev_priv) < 9 &&
9177 (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
9178 pipe_config->has_pch_encoder = true;
9180 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
9181 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9182 FDI_DP_PORT_WIDTH_SHIFT) + 1;
9184 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9188 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
9189 struct intel_crtc_state *pipe_config)
9191 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9192 enum intel_display_power_domain power_domain;
9193 u64 power_domain_mask;
9196 intel_crtc_init_scalers(crtc, pipe_config);
9198 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
9199 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9201 power_domain_mask = BIT_ULL(power_domain);
9203 pipe_config->shared_dpll = NULL;
9205 active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_mask);
9207 if (IS_GEN9_LP(dev_priv) &&
9208 bxt_get_dsi_transcoder_state(crtc, pipe_config, &power_domain_mask)) {
9216 if (!transcoder_is_dsi(pipe_config->cpu_transcoder)) {
9217 haswell_get_ddi_port_state(crtc, pipe_config);
9218 intel_get_pipe_timings(crtc, pipe_config);
9221 intel_get_pipe_src_size(crtc, pipe_config);
9223 pipe_config->gamma_mode =
9224 I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
9226 if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
9227 u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
9228 bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
9230 if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
9231 bool blend_mode_420 = tmp &
9232 PIPEMISC_YUV420_MODE_FULL_BLEND;
9234 pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
9235 if (pipe_config->ycbcr420 != clrspace_yuv ||
9236 pipe_config->ycbcr420 != blend_mode_420)
9237 DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
9238 } else if (clrspace_yuv) {
9239 DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
9243 power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
9244 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
9245 power_domain_mask |= BIT_ULL(power_domain);
9246 if (INTEL_GEN(dev_priv) >= 9)
9247 skylake_get_pfit_config(crtc, pipe_config);
9249 ironlake_get_pfit_config(crtc, pipe_config);
9252 if (IS_HASWELL(dev_priv))
9253 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
9254 (I915_READ(IPS_CTL) & IPS_ENABLE);
9256 if (pipe_config->cpu_transcoder != TRANSCODER_EDP &&
9257 !transcoder_is_dsi(pipe_config->cpu_transcoder)) {
9258 pipe_config->pixel_multiplier =
9259 I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
9261 pipe_config->pixel_multiplier = 1;
9265 for_each_power_domain(power_domain, power_domain_mask)
9266 intel_display_power_put(dev_priv, power_domain);
9271 static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
9273 struct drm_i915_private *dev_priv =
9274 to_i915(plane_state->base.plane->dev);
9275 const struct drm_framebuffer *fb = plane_state->base.fb;
9276 const struct drm_i915_gem_object *obj = intel_fb_obj(fb);
9279 if (INTEL_INFO(dev_priv)->cursor_needs_physical)
9280 base = obj->phys_handle->busaddr;
9282 base = intel_plane_ggtt_offset(plane_state);
9284 base += plane_state->main.offset;
9286 /* ILK+ do this automagically */
9287 if (HAS_GMCH_DISPLAY(dev_priv) &&
9288 plane_state->base.rotation & DRM_MODE_ROTATE_180)
9289 base += (plane_state->base.crtc_h *
9290 plane_state->base.crtc_w - 1) * fb->format->cpp[0];
9295 static u32 intel_cursor_position(const struct intel_plane_state *plane_state)
9297 int x = plane_state->base.crtc_x;
9298 int y = plane_state->base.crtc_y;
9302 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
9305 pos |= x << CURSOR_X_SHIFT;
9308 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
9311 pos |= y << CURSOR_Y_SHIFT;
9316 static bool intel_cursor_size_ok(const struct intel_plane_state *plane_state)
9318 const struct drm_mode_config *config =
9319 &plane_state->base.plane->dev->mode_config;
9320 int width = plane_state->base.crtc_w;
9321 int height = plane_state->base.crtc_h;
9323 return width > 0 && width <= config->cursor_width &&
9324 height > 0 && height <= config->cursor_height;
9327 static int intel_check_cursor(struct intel_crtc_state *crtc_state,
9328 struct intel_plane_state *plane_state)
9330 const struct drm_framebuffer *fb = plane_state->base.fb;
9335 ret = drm_plane_helper_check_state(&plane_state->base,
9337 DRM_PLANE_HELPER_NO_SCALING,
9338 DRM_PLANE_HELPER_NO_SCALING,
9346 if (fb->modifier != DRM_FORMAT_MOD_LINEAR) {
9347 DRM_DEBUG_KMS("cursor cannot be tiled\n");
9351 src_x = plane_state->base.src_x >> 16;
9352 src_y = plane_state->base.src_y >> 16;
9354 intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
9355 offset = intel_compute_tile_offset(&src_x, &src_y, plane_state, 0);
9357 if (src_x != 0 || src_y != 0) {
9358 DRM_DEBUG_KMS("Arbitrary cursor panning not supported\n");
9362 plane_state->main.offset = offset;
9367 static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,
9368 const struct intel_plane_state *plane_state)
9370 const struct drm_framebuffer *fb = plane_state->base.fb;
9372 return CURSOR_ENABLE |
9373 CURSOR_GAMMA_ENABLE |
9374 CURSOR_FORMAT_ARGB |
9375 CURSOR_STRIDE(fb->pitches[0]);
9378 static bool i845_cursor_size_ok(const struct intel_plane_state *plane_state)
9380 int width = plane_state->base.crtc_w;
9383 * 845g/865g are only limited by the width of their cursors,
9384 * the height is arbitrary up to the precision of the register.
9386 return intel_cursor_size_ok(plane_state) && IS_ALIGNED(width, 64);
9389 static int i845_check_cursor(struct intel_plane *plane,
9390 struct intel_crtc_state *crtc_state,
9391 struct intel_plane_state *plane_state)
9393 const struct drm_framebuffer *fb = plane_state->base.fb;
9396 ret = intel_check_cursor(crtc_state, plane_state);
9400 /* if we want to turn off the cursor ignore width and height */
9404 /* Check for which cursor types we support */
9405 if (!i845_cursor_size_ok(plane_state)) {
9406 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
9407 plane_state->base.crtc_w,
9408 plane_state->base.crtc_h);
9412 switch (fb->pitches[0]) {
9419 DRM_DEBUG_KMS("Invalid cursor stride (%u)\n",
9424 plane_state->ctl = i845_cursor_ctl(crtc_state, plane_state);
9429 static void i845_update_cursor(struct intel_plane *plane,
9430 const struct intel_crtc_state *crtc_state,
9431 const struct intel_plane_state *plane_state)
9433 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
9434 u32 cntl = 0, base = 0, pos = 0, size = 0;
9435 unsigned long irqflags;
9437 if (plane_state && plane_state->base.visible) {
9438 unsigned int width = plane_state->base.crtc_w;
9439 unsigned int height = plane_state->base.crtc_h;
9441 cntl = plane_state->ctl;
9442 size = (height << 12) | width;
9444 base = intel_cursor_base(plane_state);
9445 pos = intel_cursor_position(plane_state);
9448 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
9450 /* On these chipsets we can only modify the base/size/stride
9451 * whilst the cursor is disabled.
9453 if (plane->cursor.base != base ||
9454 plane->cursor.size != size ||
9455 plane->cursor.cntl != cntl) {
9456 I915_WRITE_FW(CURCNTR(PIPE_A), 0);
9457 I915_WRITE_FW(CURBASE(PIPE_A), base);
9458 I915_WRITE_FW(CURSIZE, size);
9459 I915_WRITE_FW(CURPOS(PIPE_A), pos);
9460 I915_WRITE_FW(CURCNTR(PIPE_A), cntl);
9462 plane->cursor.base = base;
9463 plane->cursor.size = size;
9464 plane->cursor.cntl = cntl;
9466 I915_WRITE_FW(CURPOS(PIPE_A), pos);
9469 POSTING_READ_FW(CURCNTR(PIPE_A));
9471 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
9474 static void i845_disable_cursor(struct intel_plane *plane,
9475 struct intel_crtc *crtc)
9477 i845_update_cursor(plane, NULL, NULL);
9480 static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,
9481 const struct intel_plane_state *plane_state)
9483 struct drm_i915_private *dev_priv =
9484 to_i915(plane_state->base.plane->dev);
9485 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
9488 cntl = MCURSOR_GAMMA_ENABLE;
9490 if (HAS_DDI(dev_priv))
9491 cntl |= CURSOR_PIPE_CSC_ENABLE;
9493 cntl |= MCURSOR_PIPE_SELECT(crtc->pipe);
9495 switch (plane_state->base.crtc_w) {
9497 cntl |= CURSOR_MODE_64_ARGB_AX;
9500 cntl |= CURSOR_MODE_128_ARGB_AX;
9503 cntl |= CURSOR_MODE_256_ARGB_AX;
9506 MISSING_CASE(plane_state->base.crtc_w);
9510 if (plane_state->base.rotation & DRM_MODE_ROTATE_180)
9511 cntl |= CURSOR_ROTATE_180;
9516 static bool i9xx_cursor_size_ok(const struct intel_plane_state *plane_state)
9518 struct drm_i915_private *dev_priv =
9519 to_i915(plane_state->base.plane->dev);
9520 int width = plane_state->base.crtc_w;
9521 int height = plane_state->base.crtc_h;
9523 if (!intel_cursor_size_ok(plane_state))
9526 /* Cursor width is limited to a few power-of-two sizes */
9537 * IVB+ have CUR_FBC_CTL which allows an arbitrary cursor
9538 * height from 8 lines up to the cursor width, when the
9539 * cursor is not rotated. Everything else requires square
9542 if (HAS_CUR_FBC(dev_priv) &&
9543 plane_state->base.rotation & DRM_MODE_ROTATE_0) {
9544 if (height < 8 || height > width)
9547 if (height != width)
9554 static int i9xx_check_cursor(struct intel_plane *plane,
9555 struct intel_crtc_state *crtc_state,
9556 struct intel_plane_state *plane_state)
9558 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
9559 const struct drm_framebuffer *fb = plane_state->base.fb;
9560 enum pipe pipe = plane->pipe;
9563 ret = intel_check_cursor(crtc_state, plane_state);
9567 /* if we want to turn off the cursor ignore width and height */
9571 /* Check for which cursor types we support */
9572 if (!i9xx_cursor_size_ok(plane_state)) {
9573 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
9574 plane_state->base.crtc_w,
9575 plane_state->base.crtc_h);
9579 if (fb->pitches[0] != plane_state->base.crtc_w * fb->format->cpp[0]) {
9580 DRM_DEBUG_KMS("Invalid cursor stride (%u) (cursor width %d)\n",
9581 fb->pitches[0], plane_state->base.crtc_w);
9586 * There's something wrong with the cursor on CHV pipe C.
9587 * If it straddles the left edge of the screen then
9588 * moving it away from the edge or disabling it often
9589 * results in a pipe underrun, and often that can lead to
9590 * dead pipe (constant underrun reported, and it scans
9591 * out just a solid color). To recover from that, the
9592 * display power well must be turned off and on again.
9593 * Refuse the put the cursor into that compromised position.
9595 if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_C &&
9596 plane_state->base.visible && plane_state->base.crtc_x < 0) {
9597 DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
9601 plane_state->ctl = i9xx_cursor_ctl(crtc_state, plane_state);
9606 static void i9xx_update_cursor(struct intel_plane *plane,
9607 const struct intel_crtc_state *crtc_state,
9608 const struct intel_plane_state *plane_state)
9610 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
9611 enum pipe pipe = plane->pipe;
9612 u32 cntl = 0, base = 0, pos = 0, fbc_ctl = 0;
9613 unsigned long irqflags;
9615 if (plane_state && plane_state->base.visible) {
9616 cntl = plane_state->ctl;
9618 if (plane_state->base.crtc_h != plane_state->base.crtc_w)
9619 fbc_ctl = CUR_FBC_CTL_EN | (plane_state->base.crtc_h - 1);
9621 base = intel_cursor_base(plane_state);
9622 pos = intel_cursor_position(plane_state);
9625 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
9628 * On some platforms writing CURCNTR first will also
9629 * cause CURPOS to be armed by the CURBASE write.
9630 * Without the CURCNTR write the CURPOS write would
9631 * arm itself. Thus we always start the full update
9632 * with a CURCNTR write.
9634 * On other platforms CURPOS always requires the
9635 * CURBASE write to arm the update. Additonally
9636 * a write to any of the cursor register will cancel
9637 * an already armed cursor update. Thus leaving out
9638 * the CURBASE write after CURPOS could lead to a
9639 * cursor that doesn't appear to move, or even change
9640 * shape. Thus we always write CURBASE.
9642 * CURCNTR and CUR_FBC_CTL are always
9643 * armed by the CURBASE write only.
9645 if (plane->cursor.base != base ||
9646 plane->cursor.size != fbc_ctl ||
9647 plane->cursor.cntl != cntl) {
9648 I915_WRITE_FW(CURCNTR(pipe), cntl);
9649 if (HAS_CUR_FBC(dev_priv))
9650 I915_WRITE_FW(CUR_FBC_CTL(pipe), fbc_ctl);
9651 I915_WRITE_FW(CURPOS(pipe), pos);
9652 I915_WRITE_FW(CURBASE(pipe), base);
9654 plane->cursor.base = base;
9655 plane->cursor.size = fbc_ctl;
9656 plane->cursor.cntl = cntl;
9658 I915_WRITE_FW(CURPOS(pipe), pos);
9659 I915_WRITE_FW(CURBASE(pipe), base);
9662 POSTING_READ_FW(CURBASE(pipe));
9664 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
9667 static void i9xx_disable_cursor(struct intel_plane *plane,
9668 struct intel_crtc *crtc)
9670 i9xx_update_cursor(plane, NULL, NULL);
9674 /* VESA 640x480x72Hz mode to set on the pipe */
9675 static const struct drm_display_mode load_detect_mode = {
9676 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
9677 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
9680 struct drm_framebuffer *
9681 intel_framebuffer_create(struct drm_i915_gem_object *obj,
9682 struct drm_mode_fb_cmd2 *mode_cmd)
9684 struct intel_framebuffer *intel_fb;
9687 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9689 return ERR_PTR(-ENOMEM);
9691 ret = intel_framebuffer_init(intel_fb, obj, mode_cmd);
9695 return &intel_fb->base;
9699 return ERR_PTR(ret);
9703 intel_framebuffer_pitch_for_width(int width, int bpp)
9705 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
9706 return ALIGN(pitch, 64);
9710 intel_framebuffer_size_for_mode(const struct drm_display_mode *mode, int bpp)
9712 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
9713 return PAGE_ALIGN(pitch * mode->vdisplay);
9716 static struct drm_framebuffer *
9717 intel_framebuffer_create_for_mode(struct drm_device *dev,
9718 const struct drm_display_mode *mode,
9721 struct drm_framebuffer *fb;
9722 struct drm_i915_gem_object *obj;
9723 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
9725 obj = i915_gem_object_create(to_i915(dev),
9726 intel_framebuffer_size_for_mode(mode, bpp));
9728 return ERR_CAST(obj);
9730 mode_cmd.width = mode->hdisplay;
9731 mode_cmd.height = mode->vdisplay;
9732 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
9734 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
9736 fb = intel_framebuffer_create(obj, &mode_cmd);
9738 i915_gem_object_put(obj);
9743 static struct drm_framebuffer *
9744 mode_fits_in_fbdev(struct drm_device *dev,
9745 const struct drm_display_mode *mode)
9747 #ifdef CONFIG_DRM_FBDEV_EMULATION
9748 struct drm_i915_private *dev_priv = to_i915(dev);
9749 struct drm_i915_gem_object *obj;
9750 struct drm_framebuffer *fb;
9752 if (!dev_priv->fbdev)
9755 if (!dev_priv->fbdev->fb)
9758 obj = dev_priv->fbdev->fb->obj;
9761 fb = &dev_priv->fbdev->fb->base;
9762 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
9763 fb->format->cpp[0] * 8))
9766 if (obj->base.size < mode->vdisplay * fb->pitches[0])
9769 drm_framebuffer_get(fb);
9776 static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
9777 struct drm_crtc *crtc,
9778 const struct drm_display_mode *mode,
9779 struct drm_framebuffer *fb,
9782 struct drm_plane_state *plane_state;
9783 int hdisplay, vdisplay;
9786 plane_state = drm_atomic_get_plane_state(state, crtc->primary);
9787 if (IS_ERR(plane_state))
9788 return PTR_ERR(plane_state);
9791 drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
9793 hdisplay = vdisplay = 0;
9795 ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
9798 drm_atomic_set_fb_for_plane(plane_state, fb);
9799 plane_state->crtc_x = 0;
9800 plane_state->crtc_y = 0;
9801 plane_state->crtc_w = hdisplay;
9802 plane_state->crtc_h = vdisplay;
9803 plane_state->src_x = x << 16;
9804 plane_state->src_y = y << 16;
9805 plane_state->src_w = hdisplay << 16;
9806 plane_state->src_h = vdisplay << 16;
9811 int intel_get_load_detect_pipe(struct drm_connector *connector,
9812 const struct drm_display_mode *mode,
9813 struct intel_load_detect_pipe *old,
9814 struct drm_modeset_acquire_ctx *ctx)
9816 struct intel_crtc *intel_crtc;
9817 struct intel_encoder *intel_encoder =
9818 intel_attached_encoder(connector);
9819 struct drm_crtc *possible_crtc;
9820 struct drm_encoder *encoder = &intel_encoder->base;
9821 struct drm_crtc *crtc = NULL;
9822 struct drm_device *dev = encoder->dev;
9823 struct drm_i915_private *dev_priv = to_i915(dev);
9824 struct drm_framebuffer *fb;
9825 struct drm_mode_config *config = &dev->mode_config;
9826 struct drm_atomic_state *state = NULL, *restore_state = NULL;
9827 struct drm_connector_state *connector_state;
9828 struct intel_crtc_state *crtc_state;
9831 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
9832 connector->base.id, connector->name,
9833 encoder->base.id, encoder->name);
9835 old->restore_state = NULL;
9837 WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
9840 * Algorithm gets a little messy:
9842 * - if the connector already has an assigned crtc, use it (but make
9843 * sure it's on first)
9845 * - try to find the first unused crtc that can drive this connector,
9846 * and use that if we find one
9849 /* See if we already have a CRTC for this connector */
9850 if (connector->state->crtc) {
9851 crtc = connector->state->crtc;
9853 ret = drm_modeset_lock(&crtc->mutex, ctx);
9857 /* Make sure the crtc and connector are running */
9861 /* Find an unused one (if possible) */
9862 for_each_crtc(dev, possible_crtc) {
9864 if (!(encoder->possible_crtcs & (1 << i)))
9867 ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
9871 if (possible_crtc->state->enable) {
9872 drm_modeset_unlock(&possible_crtc->mutex);
9876 crtc = possible_crtc;
9881 * If we didn't find an unused CRTC, don't use any.
9884 DRM_DEBUG_KMS("no pipe available for load-detect\n");
9890 intel_crtc = to_intel_crtc(crtc);
9892 ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
9896 state = drm_atomic_state_alloc(dev);
9897 restore_state = drm_atomic_state_alloc(dev);
9898 if (!state || !restore_state) {
9903 state->acquire_ctx = ctx;
9904 restore_state->acquire_ctx = ctx;
9906 connector_state = drm_atomic_get_connector_state(state, connector);
9907 if (IS_ERR(connector_state)) {
9908 ret = PTR_ERR(connector_state);
9912 ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
9916 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
9917 if (IS_ERR(crtc_state)) {
9918 ret = PTR_ERR(crtc_state);
9922 crtc_state->base.active = crtc_state->base.enable = true;
9925 mode = &load_detect_mode;
9927 /* We need a framebuffer large enough to accommodate all accesses
9928 * that the plane may generate whilst we perform load detection.
9929 * We can not rely on the fbcon either being present (we get called
9930 * during its initialisation to detect all boot displays, or it may
9931 * not even exist) or that it is large enough to satisfy the
9934 fb = mode_fits_in_fbdev(dev, mode);
9936 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
9937 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
9939 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
9941 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
9946 ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
9950 drm_framebuffer_put(fb);
9952 ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
9956 ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
9958 ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
9960 ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
9962 DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
9966 ret = drm_atomic_commit(state);
9968 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
9972 old->restore_state = restore_state;
9973 drm_atomic_state_put(state);
9975 /* let the connector get through one full cycle before testing */
9976 intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
9981 drm_atomic_state_put(state);
9984 if (restore_state) {
9985 drm_atomic_state_put(restore_state);
9986 restore_state = NULL;
9989 if (ret == -EDEADLK)
9995 void intel_release_load_detect_pipe(struct drm_connector *connector,
9996 struct intel_load_detect_pipe *old,
9997 struct drm_modeset_acquire_ctx *ctx)
9999 struct intel_encoder *intel_encoder =
10000 intel_attached_encoder(connector);
10001 struct drm_encoder *encoder = &intel_encoder->base;
10002 struct drm_atomic_state *state = old->restore_state;
10005 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10006 connector->base.id, connector->name,
10007 encoder->base.id, encoder->name);
10012 ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
10014 DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
10015 drm_atomic_state_put(state);
10018 static int i9xx_pll_refclk(struct drm_device *dev,
10019 const struct intel_crtc_state *pipe_config)
10021 struct drm_i915_private *dev_priv = to_i915(dev);
10022 u32 dpll = pipe_config->dpll_hw_state.dpll;
10024 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
10025 return dev_priv->vbt.lvds_ssc_freq;
10026 else if (HAS_PCH_SPLIT(dev_priv))
10028 else if (!IS_GEN2(dev_priv))
10034 /* Returns the clock of the currently programmed mode of the given pipe. */
10035 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
10036 struct intel_crtc_state *pipe_config)
10038 struct drm_device *dev = crtc->base.dev;
10039 struct drm_i915_private *dev_priv = to_i915(dev);
10040 int pipe = pipe_config->cpu_transcoder;
10041 u32 dpll = pipe_config->dpll_hw_state.dpll;
10045 int refclk = i9xx_pll_refclk(dev, pipe_config);
10047 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
10048 fp = pipe_config->dpll_hw_state.fp0;
10050 fp = pipe_config->dpll_hw_state.fp1;
10052 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
10053 if (IS_PINEVIEW(dev_priv)) {
10054 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
10055 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
10057 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
10058 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
10061 if (!IS_GEN2(dev_priv)) {
10062 if (IS_PINEVIEW(dev_priv))
10063 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
10064 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
10066 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
10067 DPLL_FPA01_P1_POST_DIV_SHIFT);
10069 switch (dpll & DPLL_MODE_MASK) {
10070 case DPLLB_MODE_DAC_SERIAL:
10071 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
10074 case DPLLB_MODE_LVDS:
10075 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
10079 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
10080 "mode\n", (int)(dpll & DPLL_MODE_MASK));
10084 if (IS_PINEVIEW(dev_priv))
10085 port_clock = pnv_calc_dpll_params(refclk, &clock);
10087 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10089 u32 lvds = IS_I830(dev_priv) ? 0 : I915_READ(LVDS);
10090 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
10093 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
10094 DPLL_FPA01_P1_POST_DIV_SHIFT);
10096 if (lvds & LVDS_CLKB_POWER_UP)
10101 if (dpll & PLL_P1_DIVIDE_BY_TWO)
10104 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
10105 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
10107 if (dpll & PLL_P2_DIVIDE_BY_4)
10113 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10117 * This value includes pixel_multiplier. We will use
10118 * port_clock to compute adjusted_mode.crtc_clock in the
10119 * encoder's get_config() function.
10121 pipe_config->port_clock = port_clock;
10124 int intel_dotclock_calculate(int link_freq,
10125 const struct intel_link_m_n *m_n)
10128 * The calculation for the data clock is:
10129 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
10130 * But we want to avoid losing precison if possible, so:
10131 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
10133 * and the link clock is simpler:
10134 * link_clock = (m * link_clock) / n
10140 return div_u64(mul_u32_u32(m_n->link_m, link_freq), m_n->link_n);
10143 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
10144 struct intel_crtc_state *pipe_config)
10146 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10148 /* read out port_clock from the DPLL */
10149 i9xx_crtc_clock_get(crtc, pipe_config);
10152 * In case there is an active pipe without active ports,
10153 * we may need some idea for the dotclock anyway.
10154 * Calculate one based on the FDI configuration.
10156 pipe_config->base.adjusted_mode.crtc_clock =
10157 intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
10158 &pipe_config->fdi_m_n);
10161 /* Returns the currently programmed mode of the given encoder. */
10162 struct drm_display_mode *
10163 intel_encoder_current_mode(struct intel_encoder *encoder)
10165 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
10166 struct intel_crtc_state *crtc_state;
10167 struct drm_display_mode *mode;
10168 struct intel_crtc *crtc;
10171 if (!encoder->get_hw_state(encoder, &pipe))
10174 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
10176 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
10180 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
10186 crtc_state->base.crtc = &crtc->base;
10188 if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
10194 encoder->get_config(encoder, crtc_state);
10196 intel_mode_from_pipe_config(mode, crtc_state);
10203 static void intel_crtc_destroy(struct drm_crtc *crtc)
10205 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10207 drm_crtc_cleanup(crtc);
10212 * intel_wm_need_update - Check whether watermarks need updating
10213 * @plane: drm plane
10214 * @state: new plane state
10216 * Check current plane state versus the new one to determine whether
10217 * watermarks need to be recalculated.
10219 * Returns true or false.
10221 static bool intel_wm_need_update(struct drm_plane *plane,
10222 struct drm_plane_state *state)
10224 struct intel_plane_state *new = to_intel_plane_state(state);
10225 struct intel_plane_state *cur = to_intel_plane_state(plane->state);
10227 /* Update watermarks on tiling or size changes. */
10228 if (new->base.visible != cur->base.visible)
10231 if (!cur->base.fb || !new->base.fb)
10234 if (cur->base.fb->modifier != new->base.fb->modifier ||
10235 cur->base.rotation != new->base.rotation ||
10236 drm_rect_width(&new->base.src) != drm_rect_width(&cur->base.src) ||
10237 drm_rect_height(&new->base.src) != drm_rect_height(&cur->base.src) ||
10238 drm_rect_width(&new->base.dst) != drm_rect_width(&cur->base.dst) ||
10239 drm_rect_height(&new->base.dst) != drm_rect_height(&cur->base.dst))
10245 static bool needs_scaling(const struct intel_plane_state *state)
10247 int src_w = drm_rect_width(&state->base.src) >> 16;
10248 int src_h = drm_rect_height(&state->base.src) >> 16;
10249 int dst_w = drm_rect_width(&state->base.dst);
10250 int dst_h = drm_rect_height(&state->base.dst);
10252 return (src_w != dst_w || src_h != dst_h);
10255 int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_state,
10256 struct drm_crtc_state *crtc_state,
10257 const struct intel_plane_state *old_plane_state,
10258 struct drm_plane_state *plane_state)
10260 struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc_state);
10261 struct drm_crtc *crtc = crtc_state->crtc;
10262 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10263 struct intel_plane *plane = to_intel_plane(plane_state->plane);
10264 struct drm_device *dev = crtc->dev;
10265 struct drm_i915_private *dev_priv = to_i915(dev);
10266 bool mode_changed = needs_modeset(crtc_state);
10267 bool was_crtc_enabled = old_crtc_state->base.active;
10268 bool is_crtc_enabled = crtc_state->active;
10269 bool turn_off, turn_on, visible, was_visible;
10270 struct drm_framebuffer *fb = plane_state->fb;
10273 if (INTEL_GEN(dev_priv) >= 9 && plane->id != PLANE_CURSOR) {
10274 ret = skl_update_scaler_plane(
10275 to_intel_crtc_state(crtc_state),
10276 to_intel_plane_state(plane_state));
10281 was_visible = old_plane_state->base.visible;
10282 visible = plane_state->visible;
10284 if (!was_crtc_enabled && WARN_ON(was_visible))
10285 was_visible = false;
10288 * Visibility is calculated as if the crtc was on, but
10289 * after scaler setup everything depends on it being off
10290 * when the crtc isn't active.
10292 * FIXME this is wrong for watermarks. Watermarks should also
10293 * be computed as if the pipe would be active. Perhaps move
10294 * per-plane wm computation to the .check_plane() hook, and
10295 * only combine the results from all planes in the current place?
10297 if (!is_crtc_enabled) {
10298 plane_state->visible = visible = false;
10299 to_intel_crtc_state(crtc_state)->active_planes &= ~BIT(plane->id);
10302 if (!was_visible && !visible)
10305 if (fb != old_plane_state->base.fb)
10306 pipe_config->fb_changed = true;
10308 turn_off = was_visible && (!visible || mode_changed);
10309 turn_on = visible && (!was_visible || mode_changed);
10311 DRM_DEBUG_ATOMIC("[CRTC:%d:%s] has [PLANE:%d:%s] with fb %i\n",
10312 intel_crtc->base.base.id, intel_crtc->base.name,
10313 plane->base.base.id, plane->base.name,
10314 fb ? fb->base.id : -1);
10316 DRM_DEBUG_ATOMIC("[PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
10317 plane->base.base.id, plane->base.name,
10318 was_visible, visible,
10319 turn_off, turn_on, mode_changed);
10322 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
10323 pipe_config->update_wm_pre = true;
10325 /* must disable cxsr around plane enable/disable */
10326 if (plane->id != PLANE_CURSOR)
10327 pipe_config->disable_cxsr = true;
10328 } else if (turn_off) {
10329 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
10330 pipe_config->update_wm_post = true;
10332 /* must disable cxsr around plane enable/disable */
10333 if (plane->id != PLANE_CURSOR)
10334 pipe_config->disable_cxsr = true;
10335 } else if (intel_wm_need_update(&plane->base, plane_state)) {
10336 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv)) {
10337 /* FIXME bollocks */
10338 pipe_config->update_wm_pre = true;
10339 pipe_config->update_wm_post = true;
10343 if (visible || was_visible)
10344 pipe_config->fb_bits |= plane->frontbuffer_bit;
10347 * WaCxSRDisabledForSpriteScaling:ivb
10349 * cstate->update_wm was already set above, so this flag will
10350 * take effect when we commit and program watermarks.
10352 if (plane->id == PLANE_SPRITE0 && IS_IVYBRIDGE(dev_priv) &&
10353 needs_scaling(to_intel_plane_state(plane_state)) &&
10354 !needs_scaling(old_plane_state))
10355 pipe_config->disable_lp_wm = true;
10360 static bool encoders_cloneable(const struct intel_encoder *a,
10361 const struct intel_encoder *b)
10363 /* masks could be asymmetric, so check both ways */
10364 return a == b || (a->cloneable & (1 << b->type) &&
10365 b->cloneable & (1 << a->type));
10368 static bool check_single_encoder_cloning(struct drm_atomic_state *state,
10369 struct intel_crtc *crtc,
10370 struct intel_encoder *encoder)
10372 struct intel_encoder *source_encoder;
10373 struct drm_connector *connector;
10374 struct drm_connector_state *connector_state;
10377 for_each_new_connector_in_state(state, connector, connector_state, i) {
10378 if (connector_state->crtc != &crtc->base)
10382 to_intel_encoder(connector_state->best_encoder);
10383 if (!encoders_cloneable(encoder, source_encoder))
10390 static int intel_crtc_atomic_check(struct drm_crtc *crtc,
10391 struct drm_crtc_state *crtc_state)
10393 struct drm_device *dev = crtc->dev;
10394 struct drm_i915_private *dev_priv = to_i915(dev);
10395 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10396 struct intel_crtc_state *pipe_config =
10397 to_intel_crtc_state(crtc_state);
10398 struct drm_atomic_state *state = crtc_state->state;
10400 bool mode_changed = needs_modeset(crtc_state);
10402 if (mode_changed && !crtc_state->active)
10403 pipe_config->update_wm_post = true;
10405 if (mode_changed && crtc_state->enable &&
10406 dev_priv->display.crtc_compute_clock &&
10407 !WARN_ON(pipe_config->shared_dpll)) {
10408 ret = dev_priv->display.crtc_compute_clock(intel_crtc,
10414 if (crtc_state->color_mgmt_changed) {
10415 ret = intel_color_check(crtc, crtc_state);
10420 * Changing color management on Intel hardware is
10421 * handled as part of planes update.
10423 crtc_state->planes_changed = true;
10427 if (dev_priv->display.compute_pipe_wm) {
10428 ret = dev_priv->display.compute_pipe_wm(pipe_config);
10430 DRM_DEBUG_KMS("Target pipe watermarks are invalid\n");
10435 if (dev_priv->display.compute_intermediate_wm &&
10436 !to_intel_atomic_state(state)->skip_intermediate_wm) {
10437 if (WARN_ON(!dev_priv->display.compute_pipe_wm))
10441 * Calculate 'intermediate' watermarks that satisfy both the
10442 * old state and the new state. We can program these
10445 ret = dev_priv->display.compute_intermediate_wm(dev,
10449 DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n");
10452 } else if (dev_priv->display.compute_intermediate_wm) {
10453 if (HAS_PCH_SPLIT(dev_priv) && INTEL_GEN(dev_priv) < 9)
10454 pipe_config->wm.ilk.intermediate = pipe_config->wm.ilk.optimal;
10457 if (INTEL_GEN(dev_priv) >= 9) {
10459 ret = skl_update_scaler_crtc(pipe_config);
10462 ret = skl_check_pipe_max_pixel_rate(intel_crtc,
10465 ret = intel_atomic_setup_scalers(dev_priv, intel_crtc,
10472 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
10473 .atomic_begin = intel_begin_crtc_commit,
10474 .atomic_flush = intel_finish_crtc_commit,
10475 .atomic_check = intel_crtc_atomic_check,
10478 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
10480 struct intel_connector *connector;
10481 struct drm_connector_list_iter conn_iter;
10483 drm_connector_list_iter_begin(dev, &conn_iter);
10484 for_each_intel_connector_iter(connector, &conn_iter) {
10485 if (connector->base.state->crtc)
10486 drm_connector_unreference(&connector->base);
10488 if (connector->base.encoder) {
10489 connector->base.state->best_encoder =
10490 connector->base.encoder;
10491 connector->base.state->crtc =
10492 connector->base.encoder->crtc;
10494 drm_connector_reference(&connector->base);
10496 connector->base.state->best_encoder = NULL;
10497 connector->base.state->crtc = NULL;
10500 drm_connector_list_iter_end(&conn_iter);
10504 connected_sink_compute_bpp(struct intel_connector *connector,
10505 struct intel_crtc_state *pipe_config)
10507 const struct drm_display_info *info = &connector->base.display_info;
10508 int bpp = pipe_config->pipe_bpp;
10510 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
10511 connector->base.base.id,
10512 connector->base.name);
10514 /* Don't use an invalid EDID bpc value */
10515 if (info->bpc != 0 && info->bpc * 3 < bpp) {
10516 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
10517 bpp, info->bpc * 3);
10518 pipe_config->pipe_bpp = info->bpc * 3;
10521 /* Clamp bpp to 8 on screens without EDID 1.4 */
10522 if (info->bpc == 0 && bpp > 24) {
10523 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
10525 pipe_config->pipe_bpp = 24;
10530 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
10531 struct intel_crtc_state *pipe_config)
10533 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10534 struct drm_atomic_state *state;
10535 struct drm_connector *connector;
10536 struct drm_connector_state *connector_state;
10539 if ((IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
10540 IS_CHERRYVIEW(dev_priv)))
10542 else if (INTEL_GEN(dev_priv) >= 5)
10548 pipe_config->pipe_bpp = bpp;
10550 state = pipe_config->base.state;
10552 /* Clamp display bpp to EDID value */
10553 for_each_new_connector_in_state(state, connector, connector_state, i) {
10554 if (connector_state->crtc != &crtc->base)
10557 connected_sink_compute_bpp(to_intel_connector(connector),
10564 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
10566 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
10567 "type: 0x%x flags: 0x%x\n",
10569 mode->crtc_hdisplay, mode->crtc_hsync_start,
10570 mode->crtc_hsync_end, mode->crtc_htotal,
10571 mode->crtc_vdisplay, mode->crtc_vsync_start,
10572 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
10576 intel_dump_m_n_config(struct intel_crtc_state *pipe_config, char *id,
10577 unsigned int lane_count, struct intel_link_m_n *m_n)
10579 DRM_DEBUG_KMS("%s: lanes: %i; gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
10581 m_n->gmch_m, m_n->gmch_n,
10582 m_n->link_m, m_n->link_n, m_n->tu);
10585 #define OUTPUT_TYPE(x) [INTEL_OUTPUT_ ## x] = #x
10587 static const char * const output_type_str[] = {
10588 OUTPUT_TYPE(UNUSED),
10589 OUTPUT_TYPE(ANALOG),
10593 OUTPUT_TYPE(TVOUT),
10598 OUTPUT_TYPE(UNKNOWN),
10599 OUTPUT_TYPE(DP_MST),
10604 static void snprintf_output_types(char *buf, size_t len,
10605 unsigned int output_types)
10612 for (i = 0; i < ARRAY_SIZE(output_type_str); i++) {
10615 if ((output_types & BIT(i)) == 0)
10618 r = snprintf(str, len, "%s%s",
10619 str != buf ? "," : "", output_type_str[i]);
10625 output_types &= ~BIT(i);
10628 WARN_ON_ONCE(output_types != 0);
10631 static void intel_dump_pipe_config(struct intel_crtc *crtc,
10632 struct intel_crtc_state *pipe_config,
10633 const char *context)
10635 struct drm_device *dev = crtc->base.dev;
10636 struct drm_i915_private *dev_priv = to_i915(dev);
10637 struct drm_plane *plane;
10638 struct intel_plane *intel_plane;
10639 struct intel_plane_state *state;
10640 struct drm_framebuffer *fb;
10643 DRM_DEBUG_KMS("[CRTC:%d:%s]%s\n",
10644 crtc->base.base.id, crtc->base.name, context);
10646 snprintf_output_types(buf, sizeof(buf), pipe_config->output_types);
10647 DRM_DEBUG_KMS("output_types: %s (0x%x)\n",
10648 buf, pipe_config->output_types);
10650 DRM_DEBUG_KMS("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
10651 transcoder_name(pipe_config->cpu_transcoder),
10652 pipe_config->pipe_bpp, pipe_config->dither);
10654 if (pipe_config->has_pch_encoder)
10655 intel_dump_m_n_config(pipe_config, "fdi",
10656 pipe_config->fdi_lanes,
10657 &pipe_config->fdi_m_n);
10659 if (pipe_config->ycbcr420)
10660 DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
10662 if (intel_crtc_has_dp_encoder(pipe_config)) {
10663 intel_dump_m_n_config(pipe_config, "dp m_n",
10664 pipe_config->lane_count, &pipe_config->dp_m_n);
10665 if (pipe_config->has_drrs)
10666 intel_dump_m_n_config(pipe_config, "dp m2_n2",
10667 pipe_config->lane_count,
10668 &pipe_config->dp_m2_n2);
10671 DRM_DEBUG_KMS("audio: %i, infoframes: %i\n",
10672 pipe_config->has_audio, pipe_config->has_infoframe);
10674 DRM_DEBUG_KMS("requested mode:\n");
10675 drm_mode_debug_printmodeline(&pipe_config->base.mode);
10676 DRM_DEBUG_KMS("adjusted mode:\n");
10677 drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
10678 intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
10679 DRM_DEBUG_KMS("port clock: %d, pipe src size: %dx%d, pixel rate %d\n",
10680 pipe_config->port_clock,
10681 pipe_config->pipe_src_w, pipe_config->pipe_src_h,
10682 pipe_config->pixel_rate);
10684 if (INTEL_GEN(dev_priv) >= 9)
10685 DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
10687 pipe_config->scaler_state.scaler_users,
10688 pipe_config->scaler_state.scaler_id);
10690 if (HAS_GMCH_DISPLAY(dev_priv))
10691 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
10692 pipe_config->gmch_pfit.control,
10693 pipe_config->gmch_pfit.pgm_ratios,
10694 pipe_config->gmch_pfit.lvds_border_bits);
10696 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
10697 pipe_config->pch_pfit.pos,
10698 pipe_config->pch_pfit.size,
10699 enableddisabled(pipe_config->pch_pfit.enabled));
10701 DRM_DEBUG_KMS("ips: %i, double wide: %i\n",
10702 pipe_config->ips_enabled, pipe_config->double_wide);
10704 intel_dpll_dump_hw_state(dev_priv, &pipe_config->dpll_hw_state);
10706 DRM_DEBUG_KMS("planes on this crtc\n");
10707 list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
10708 struct drm_format_name_buf format_name;
10709 intel_plane = to_intel_plane(plane);
10710 if (intel_plane->pipe != crtc->pipe)
10713 state = to_intel_plane_state(plane->state);
10714 fb = state->base.fb;
10716 DRM_DEBUG_KMS("[PLANE:%d:%s] disabled, scaler_id = %d\n",
10717 plane->base.id, plane->name, state->scaler_id);
10721 DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d, fb = %ux%u format = %s\n",
10722 plane->base.id, plane->name,
10723 fb->base.id, fb->width, fb->height,
10724 drm_get_format_name(fb->format->format, &format_name));
10725 if (INTEL_GEN(dev_priv) >= 9)
10726 DRM_DEBUG_KMS("\tscaler:%d src %dx%d+%d+%d dst %dx%d+%d+%d\n",
10728 state->base.src.x1 >> 16,
10729 state->base.src.y1 >> 16,
10730 drm_rect_width(&state->base.src) >> 16,
10731 drm_rect_height(&state->base.src) >> 16,
10732 state->base.dst.x1, state->base.dst.y1,
10733 drm_rect_width(&state->base.dst),
10734 drm_rect_height(&state->base.dst));
10738 static bool check_digital_port_conflicts(struct drm_atomic_state *state)
10740 struct drm_device *dev = state->dev;
10741 struct drm_connector *connector;
10742 struct drm_connector_list_iter conn_iter;
10743 unsigned int used_ports = 0;
10744 unsigned int used_mst_ports = 0;
10747 * Walk the connector list instead of the encoder
10748 * list to detect the problem on ddi platforms
10749 * where there's just one encoder per digital port.
10751 drm_connector_list_iter_begin(dev, &conn_iter);
10752 drm_for_each_connector_iter(connector, &conn_iter) {
10753 struct drm_connector_state *connector_state;
10754 struct intel_encoder *encoder;
10756 connector_state = drm_atomic_get_existing_connector_state(state, connector);
10757 if (!connector_state)
10758 connector_state = connector->state;
10760 if (!connector_state->best_encoder)
10763 encoder = to_intel_encoder(connector_state->best_encoder);
10765 WARN_ON(!connector_state->crtc);
10767 switch (encoder->type) {
10768 unsigned int port_mask;
10769 case INTEL_OUTPUT_UNKNOWN:
10770 if (WARN_ON(!HAS_DDI(to_i915(dev))))
10772 case INTEL_OUTPUT_DP:
10773 case INTEL_OUTPUT_HDMI:
10774 case INTEL_OUTPUT_EDP:
10775 port_mask = 1 << enc_to_dig_port(&encoder->base)->port;
10777 /* the same port mustn't appear more than once */
10778 if (used_ports & port_mask)
10781 used_ports |= port_mask;
10783 case INTEL_OUTPUT_DP_MST:
10785 1 << enc_to_mst(&encoder->base)->primary->port;
10791 drm_connector_list_iter_end(&conn_iter);
10793 /* can't mix MST and SST/HDMI on the same port */
10794 if (used_ports & used_mst_ports)
10801 clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
10803 struct drm_i915_private *dev_priv =
10804 to_i915(crtc_state->base.crtc->dev);
10805 struct intel_crtc_scaler_state scaler_state;
10806 struct intel_dpll_hw_state dpll_hw_state;
10807 struct intel_shared_dpll *shared_dpll;
10808 struct intel_crtc_wm_state wm_state;
10809 bool force_thru, ips_force_disable;
10811 /* FIXME: before the switch to atomic started, a new pipe_config was
10812 * kzalloc'd. Code that depends on any field being zero should be
10813 * fixed, so that the crtc_state can be safely duplicated. For now,
10814 * only fields that are know to not cause problems are preserved. */
10816 scaler_state = crtc_state->scaler_state;
10817 shared_dpll = crtc_state->shared_dpll;
10818 dpll_hw_state = crtc_state->dpll_hw_state;
10819 force_thru = crtc_state->pch_pfit.force_thru;
10820 ips_force_disable = crtc_state->ips_force_disable;
10821 if (IS_G4X(dev_priv) ||
10822 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
10823 wm_state = crtc_state->wm;
10825 /* Keep base drm_crtc_state intact, only clear our extended struct */
10826 BUILD_BUG_ON(offsetof(struct intel_crtc_state, base));
10827 memset(&crtc_state->base + 1, 0,
10828 sizeof(*crtc_state) - sizeof(crtc_state->base));
10830 crtc_state->scaler_state = scaler_state;
10831 crtc_state->shared_dpll = shared_dpll;
10832 crtc_state->dpll_hw_state = dpll_hw_state;
10833 crtc_state->pch_pfit.force_thru = force_thru;
10834 crtc_state->ips_force_disable = ips_force_disable;
10835 if (IS_G4X(dev_priv) ||
10836 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
10837 crtc_state->wm = wm_state;
10841 intel_modeset_pipe_config(struct drm_crtc *crtc,
10842 struct intel_crtc_state *pipe_config)
10844 struct drm_atomic_state *state = pipe_config->base.state;
10845 struct intel_encoder *encoder;
10846 struct drm_connector *connector;
10847 struct drm_connector_state *connector_state;
10848 int base_bpp, ret = -EINVAL;
10852 clear_intel_crtc_state(pipe_config);
10854 pipe_config->cpu_transcoder =
10855 (enum transcoder) to_intel_crtc(crtc)->pipe;
10858 * Sanitize sync polarity flags based on requested ones. If neither
10859 * positive or negative polarity is requested, treat this as meaning
10860 * negative polarity.
10862 if (!(pipe_config->base.adjusted_mode.flags &
10863 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
10864 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
10866 if (!(pipe_config->base.adjusted_mode.flags &
10867 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
10868 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
10870 base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
10876 * Determine the real pipe dimensions. Note that stereo modes can
10877 * increase the actual pipe size due to the frame doubling and
10878 * insertion of additional space for blanks between the frame. This
10879 * is stored in the crtc timings. We use the requested mode to do this
10880 * computation to clearly distinguish it from the adjusted mode, which
10881 * can be changed by the connectors in the below retry loop.
10883 drm_mode_get_hv_timing(&pipe_config->base.mode,
10884 &pipe_config->pipe_src_w,
10885 &pipe_config->pipe_src_h);
10887 for_each_new_connector_in_state(state, connector, connector_state, i) {
10888 if (connector_state->crtc != crtc)
10891 encoder = to_intel_encoder(connector_state->best_encoder);
10893 if (!check_single_encoder_cloning(state, to_intel_crtc(crtc), encoder)) {
10894 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
10899 * Determine output_types before calling the .compute_config()
10900 * hooks so that the hooks can use this information safely.
10902 pipe_config->output_types |= 1 << encoder->type;
10906 /* Ensure the port clock defaults are reset when retrying. */
10907 pipe_config->port_clock = 0;
10908 pipe_config->pixel_multiplier = 1;
10910 /* Fill in default crtc timings, allow encoders to overwrite them. */
10911 drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
10912 CRTC_STEREO_DOUBLE);
10914 /* Pass our mode to the connectors and the CRTC to give them a chance to
10915 * adjust it according to limitations or connector properties, and also
10916 * a chance to reject the mode entirely.
10918 for_each_new_connector_in_state(state, connector, connector_state, i) {
10919 if (connector_state->crtc != crtc)
10922 encoder = to_intel_encoder(connector_state->best_encoder);
10924 if (!(encoder->compute_config(encoder, pipe_config, connector_state))) {
10925 DRM_DEBUG_KMS("Encoder config failure\n");
10930 /* Set default port clock if not overwritten by the encoder. Needs to be
10931 * done afterwards in case the encoder adjusts the mode. */
10932 if (!pipe_config->port_clock)
10933 pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
10934 * pipe_config->pixel_multiplier;
10936 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
10938 DRM_DEBUG_KMS("CRTC fixup failed\n");
10942 if (ret == RETRY) {
10943 if (WARN(!retry, "loop in pipe configuration computation\n")) {
10948 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
10950 goto encoder_retry;
10953 /* Dithering seems to not pass-through bits correctly when it should, so
10954 * only enable it on 6bpc panels and when its not a compliance
10955 * test requesting 6bpc video pattern.
10957 pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
10958 !pipe_config->dither_force_disable;
10959 DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
10960 base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
10967 intel_modeset_update_crtc_state(struct drm_atomic_state *state)
10969 struct drm_crtc *crtc;
10970 struct drm_crtc_state *new_crtc_state;
10973 /* Double check state. */
10974 for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
10975 to_intel_crtc(crtc)->config = to_intel_crtc_state(new_crtc_state);
10978 * Update legacy state to satisfy fbc code. This can
10979 * be removed when fbc uses the atomic state.
10981 if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
10982 struct drm_plane_state *plane_state = crtc->primary->state;
10984 crtc->primary->fb = plane_state->fb;
10985 crtc->x = plane_state->src_x >> 16;
10986 crtc->y = plane_state->src_y >> 16;
10991 static bool intel_fuzzy_clock_check(int clock1, int clock2)
10995 if (clock1 == clock2)
10998 if (!clock1 || !clock2)
11001 diff = abs(clock1 - clock2);
11003 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
11010 intel_compare_m_n(unsigned int m, unsigned int n,
11011 unsigned int m2, unsigned int n2,
11014 if (m == m2 && n == n2)
11017 if (exact || !m || !n || !m2 || !n2)
11020 BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
11027 } else if (n < n2) {
11037 return intel_fuzzy_clock_check(m, m2);
11041 intel_compare_link_m_n(const struct intel_link_m_n *m_n,
11042 struct intel_link_m_n *m2_n2,
11045 if (m_n->tu == m2_n2->tu &&
11046 intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
11047 m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
11048 intel_compare_m_n(m_n->link_m, m_n->link_n,
11049 m2_n2->link_m, m2_n2->link_n, !adjust)) {
11059 static void __printf(3, 4)
11060 pipe_config_err(bool adjust, const char *name, const char *format, ...)
11063 unsigned int category;
11064 struct va_format vaf;
11068 level = KERN_DEBUG;
11069 category = DRM_UT_KMS;
11072 category = DRM_UT_NONE;
11075 va_start(args, format);
11079 drm_printk(level, category, "mismatch in %s %pV", name, &vaf);
11085 intel_pipe_config_compare(struct drm_i915_private *dev_priv,
11086 struct intel_crtc_state *current_config,
11087 struct intel_crtc_state *pipe_config,
11092 #define PIPE_CONF_CHECK_X(name) \
11093 if (current_config->name != pipe_config->name) { \
11094 pipe_config_err(adjust, __stringify(name), \
11095 "(expected 0x%08x, found 0x%08x)\n", \
11096 current_config->name, \
11097 pipe_config->name); \
11101 #define PIPE_CONF_CHECK_I(name) \
11102 if (current_config->name != pipe_config->name) { \
11103 pipe_config_err(adjust, __stringify(name), \
11104 "(expected %i, found %i)\n", \
11105 current_config->name, \
11106 pipe_config->name); \
11110 #define PIPE_CONF_CHECK_P(name) \
11111 if (current_config->name != pipe_config->name) { \
11112 pipe_config_err(adjust, __stringify(name), \
11113 "(expected %p, found %p)\n", \
11114 current_config->name, \
11115 pipe_config->name); \
11119 #define PIPE_CONF_CHECK_M_N(name) \
11120 if (!intel_compare_link_m_n(¤t_config->name, \
11121 &pipe_config->name,\
11123 pipe_config_err(adjust, __stringify(name), \
11124 "(expected tu %i gmch %i/%i link %i/%i, " \
11125 "found tu %i, gmch %i/%i link %i/%i)\n", \
11126 current_config->name.tu, \
11127 current_config->name.gmch_m, \
11128 current_config->name.gmch_n, \
11129 current_config->name.link_m, \
11130 current_config->name.link_n, \
11131 pipe_config->name.tu, \
11132 pipe_config->name.gmch_m, \
11133 pipe_config->name.gmch_n, \
11134 pipe_config->name.link_m, \
11135 pipe_config->name.link_n); \
11139 /* This is required for BDW+ where there is only one set of registers for
11140 * switching between high and low RR.
11141 * This macro can be used whenever a comparison has to be made between one
11142 * hw state and multiple sw state variables.
11144 #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
11145 if (!intel_compare_link_m_n(¤t_config->name, \
11146 &pipe_config->name, adjust) && \
11147 !intel_compare_link_m_n(¤t_config->alt_name, \
11148 &pipe_config->name, adjust)) { \
11149 pipe_config_err(adjust, __stringify(name), \
11150 "(expected tu %i gmch %i/%i link %i/%i, " \
11151 "or tu %i gmch %i/%i link %i/%i, " \
11152 "found tu %i, gmch %i/%i link %i/%i)\n", \
11153 current_config->name.tu, \
11154 current_config->name.gmch_m, \
11155 current_config->name.gmch_n, \
11156 current_config->name.link_m, \
11157 current_config->name.link_n, \
11158 current_config->alt_name.tu, \
11159 current_config->alt_name.gmch_m, \
11160 current_config->alt_name.gmch_n, \
11161 current_config->alt_name.link_m, \
11162 current_config->alt_name.link_n, \
11163 pipe_config->name.tu, \
11164 pipe_config->name.gmch_m, \
11165 pipe_config->name.gmch_n, \
11166 pipe_config->name.link_m, \
11167 pipe_config->name.link_n); \
11171 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
11172 if ((current_config->name ^ pipe_config->name) & (mask)) { \
11173 pipe_config_err(adjust, __stringify(name), \
11174 "(%x) (expected %i, found %i)\n", \
11176 current_config->name & (mask), \
11177 pipe_config->name & (mask)); \
11181 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
11182 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
11183 pipe_config_err(adjust, __stringify(name), \
11184 "(expected %i, found %i)\n", \
11185 current_config->name, \
11186 pipe_config->name); \
11190 #define PIPE_CONF_QUIRK(quirk) \
11191 ((current_config->quirks | pipe_config->quirks) & (quirk))
11193 PIPE_CONF_CHECK_I(cpu_transcoder);
11195 PIPE_CONF_CHECK_I(has_pch_encoder);
11196 PIPE_CONF_CHECK_I(fdi_lanes);
11197 PIPE_CONF_CHECK_M_N(fdi_m_n);
11199 PIPE_CONF_CHECK_I(lane_count);
11200 PIPE_CONF_CHECK_X(lane_lat_optim_mask);
11202 if (INTEL_GEN(dev_priv) < 8) {
11203 PIPE_CONF_CHECK_M_N(dp_m_n);
11205 if (current_config->has_drrs)
11206 PIPE_CONF_CHECK_M_N(dp_m2_n2);
11208 PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
11210 PIPE_CONF_CHECK_X(output_types);
11212 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
11213 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
11214 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
11215 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
11216 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
11217 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
11219 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
11220 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
11221 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
11222 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
11223 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
11224 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
11226 PIPE_CONF_CHECK_I(pixel_multiplier);
11227 PIPE_CONF_CHECK_I(has_hdmi_sink);
11228 if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
11229 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
11230 PIPE_CONF_CHECK_I(limited_color_range);
11232 PIPE_CONF_CHECK_I(hdmi_scrambling);
11233 PIPE_CONF_CHECK_I(hdmi_high_tmds_clock_ratio);
11234 PIPE_CONF_CHECK_I(has_infoframe);
11235 PIPE_CONF_CHECK_I(ycbcr420);
11237 PIPE_CONF_CHECK_I(has_audio);
11239 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
11240 DRM_MODE_FLAG_INTERLACE);
11242 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
11243 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
11244 DRM_MODE_FLAG_PHSYNC);
11245 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
11246 DRM_MODE_FLAG_NHSYNC);
11247 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
11248 DRM_MODE_FLAG_PVSYNC);
11249 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
11250 DRM_MODE_FLAG_NVSYNC);
11253 PIPE_CONF_CHECK_X(gmch_pfit.control);
11254 /* pfit ratios are autocomputed by the hw on gen4+ */
11255 if (INTEL_GEN(dev_priv) < 4)
11256 PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios);
11257 PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
11260 PIPE_CONF_CHECK_I(pipe_src_w);
11261 PIPE_CONF_CHECK_I(pipe_src_h);
11263 PIPE_CONF_CHECK_I(pch_pfit.enabled);
11264 if (current_config->pch_pfit.enabled) {
11265 PIPE_CONF_CHECK_X(pch_pfit.pos);
11266 PIPE_CONF_CHECK_X(pch_pfit.size);
11269 PIPE_CONF_CHECK_I(scaler_state.scaler_id);
11270 PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate);
11273 /* BDW+ don't expose a synchronous way to read the state */
11274 if (IS_HASWELL(dev_priv))
11275 PIPE_CONF_CHECK_I(ips_enabled);
11277 PIPE_CONF_CHECK_I(double_wide);
11279 PIPE_CONF_CHECK_P(shared_dpll);
11280 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
11281 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
11282 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
11283 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
11284 PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
11285 PIPE_CONF_CHECK_X(dpll_hw_state.spll);
11286 PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
11287 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
11288 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
11289 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr0);
11290 PIPE_CONF_CHECK_X(dpll_hw_state.ebb0);
11291 PIPE_CONF_CHECK_X(dpll_hw_state.ebb4);
11292 PIPE_CONF_CHECK_X(dpll_hw_state.pll0);
11293 PIPE_CONF_CHECK_X(dpll_hw_state.pll1);
11294 PIPE_CONF_CHECK_X(dpll_hw_state.pll2);
11295 PIPE_CONF_CHECK_X(dpll_hw_state.pll3);
11296 PIPE_CONF_CHECK_X(dpll_hw_state.pll6);
11297 PIPE_CONF_CHECK_X(dpll_hw_state.pll8);
11298 PIPE_CONF_CHECK_X(dpll_hw_state.pll9);
11299 PIPE_CONF_CHECK_X(dpll_hw_state.pll10);
11300 PIPE_CONF_CHECK_X(dpll_hw_state.pcsdw12);
11302 PIPE_CONF_CHECK_X(dsi_pll.ctrl);
11303 PIPE_CONF_CHECK_X(dsi_pll.div);
11305 if (IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5)
11306 PIPE_CONF_CHECK_I(pipe_bpp);
11308 PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
11309 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
11311 #undef PIPE_CONF_CHECK_X
11312 #undef PIPE_CONF_CHECK_I
11313 #undef PIPE_CONF_CHECK_P
11314 #undef PIPE_CONF_CHECK_FLAGS
11315 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
11316 #undef PIPE_CONF_QUIRK
11321 static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv,
11322 const struct intel_crtc_state *pipe_config)
11324 if (pipe_config->has_pch_encoder) {
11325 int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
11326 &pipe_config->fdi_m_n);
11327 int dotclock = pipe_config->base.adjusted_mode.crtc_clock;
11330 * FDI already provided one idea for the dotclock.
11331 * Yell if the encoder disagrees.
11333 WARN(!intel_fuzzy_clock_check(fdi_dotclock, dotclock),
11334 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
11335 fdi_dotclock, dotclock);
11339 static void verify_wm_state(struct drm_crtc *crtc,
11340 struct drm_crtc_state *new_state)
11342 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
11343 struct skl_ddb_allocation hw_ddb, *sw_ddb;
11344 struct skl_pipe_wm hw_wm, *sw_wm;
11345 struct skl_plane_wm *hw_plane_wm, *sw_plane_wm;
11346 struct skl_ddb_entry *hw_ddb_entry, *sw_ddb_entry;
11347 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11348 const enum pipe pipe = intel_crtc->pipe;
11349 int plane, level, max_level = ilk_wm_max_level(dev_priv);
11351 if (INTEL_GEN(dev_priv) < 9 || !new_state->active)
11354 skl_pipe_wm_get_hw_state(crtc, &hw_wm);
11355 sw_wm = &to_intel_crtc_state(new_state)->wm.skl.optimal;
11357 skl_ddb_get_hw_state(dev_priv, &hw_ddb);
11358 sw_ddb = &dev_priv->wm.skl_hw.ddb;
11361 for_each_universal_plane(dev_priv, pipe, plane) {
11362 hw_plane_wm = &hw_wm.planes[plane];
11363 sw_plane_wm = &sw_wm->planes[plane];
11366 for (level = 0; level <= max_level; level++) {
11367 if (skl_wm_level_equals(&hw_plane_wm->wm[level],
11368 &sw_plane_wm->wm[level]))
11371 DRM_ERROR("mismatch in WM pipe %c plane %d level %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
11372 pipe_name(pipe), plane + 1, level,
11373 sw_plane_wm->wm[level].plane_en,
11374 sw_plane_wm->wm[level].plane_res_b,
11375 sw_plane_wm->wm[level].plane_res_l,
11376 hw_plane_wm->wm[level].plane_en,
11377 hw_plane_wm->wm[level].plane_res_b,
11378 hw_plane_wm->wm[level].plane_res_l);
11381 if (!skl_wm_level_equals(&hw_plane_wm->trans_wm,
11382 &sw_plane_wm->trans_wm)) {
11383 DRM_ERROR("mismatch in trans WM pipe %c plane %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
11384 pipe_name(pipe), plane + 1,
11385 sw_plane_wm->trans_wm.plane_en,
11386 sw_plane_wm->trans_wm.plane_res_b,
11387 sw_plane_wm->trans_wm.plane_res_l,
11388 hw_plane_wm->trans_wm.plane_en,
11389 hw_plane_wm->trans_wm.plane_res_b,
11390 hw_plane_wm->trans_wm.plane_res_l);
11394 hw_ddb_entry = &hw_ddb.plane[pipe][plane];
11395 sw_ddb_entry = &sw_ddb->plane[pipe][plane];
11397 if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
11398 DRM_ERROR("mismatch in DDB state pipe %c plane %d (expected (%u,%u), found (%u,%u))\n",
11399 pipe_name(pipe), plane + 1,
11400 sw_ddb_entry->start, sw_ddb_entry->end,
11401 hw_ddb_entry->start, hw_ddb_entry->end);
11407 * If the cursor plane isn't active, we may not have updated it's ddb
11408 * allocation. In that case since the ddb allocation will be updated
11409 * once the plane becomes visible, we can skip this check
11412 hw_plane_wm = &hw_wm.planes[PLANE_CURSOR];
11413 sw_plane_wm = &sw_wm->planes[PLANE_CURSOR];
11416 for (level = 0; level <= max_level; level++) {
11417 if (skl_wm_level_equals(&hw_plane_wm->wm[level],
11418 &sw_plane_wm->wm[level]))
11421 DRM_ERROR("mismatch in WM pipe %c cursor level %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
11422 pipe_name(pipe), level,
11423 sw_plane_wm->wm[level].plane_en,
11424 sw_plane_wm->wm[level].plane_res_b,
11425 sw_plane_wm->wm[level].plane_res_l,
11426 hw_plane_wm->wm[level].plane_en,
11427 hw_plane_wm->wm[level].plane_res_b,
11428 hw_plane_wm->wm[level].plane_res_l);
11431 if (!skl_wm_level_equals(&hw_plane_wm->trans_wm,
11432 &sw_plane_wm->trans_wm)) {
11433 DRM_ERROR("mismatch in trans WM pipe %c cursor (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
11435 sw_plane_wm->trans_wm.plane_en,
11436 sw_plane_wm->trans_wm.plane_res_b,
11437 sw_plane_wm->trans_wm.plane_res_l,
11438 hw_plane_wm->trans_wm.plane_en,
11439 hw_plane_wm->trans_wm.plane_res_b,
11440 hw_plane_wm->trans_wm.plane_res_l);
11444 hw_ddb_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
11445 sw_ddb_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
11447 if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
11448 DRM_ERROR("mismatch in DDB state pipe %c cursor (expected (%u,%u), found (%u,%u))\n",
11450 sw_ddb_entry->start, sw_ddb_entry->end,
11451 hw_ddb_entry->start, hw_ddb_entry->end);
11457 verify_connector_state(struct drm_device *dev,
11458 struct drm_atomic_state *state,
11459 struct drm_crtc *crtc)
11461 struct drm_connector *connector;
11462 struct drm_connector_state *new_conn_state;
11465 for_each_new_connector_in_state(state, connector, new_conn_state, i) {
11466 struct drm_encoder *encoder = connector->encoder;
11467 struct drm_crtc_state *crtc_state = NULL;
11469 if (new_conn_state->crtc != crtc)
11473 crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
11475 intel_connector_verify_state(crtc_state, new_conn_state);
11477 I915_STATE_WARN(new_conn_state->best_encoder != encoder,
11478 "connector's atomic encoder doesn't match legacy encoder\n");
11483 verify_encoder_state(struct drm_device *dev, struct drm_atomic_state *state)
11485 struct intel_encoder *encoder;
11486 struct drm_connector *connector;
11487 struct drm_connector_state *old_conn_state, *new_conn_state;
11490 for_each_intel_encoder(dev, encoder) {
11491 bool enabled = false, found = false;
11494 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
11495 encoder->base.base.id,
11496 encoder->base.name);
11498 for_each_oldnew_connector_in_state(state, connector, old_conn_state,
11499 new_conn_state, i) {
11500 if (old_conn_state->best_encoder == &encoder->base)
11503 if (new_conn_state->best_encoder != &encoder->base)
11505 found = enabled = true;
11507 I915_STATE_WARN(new_conn_state->crtc !=
11508 encoder->base.crtc,
11509 "connector's crtc doesn't match encoder crtc\n");
11515 I915_STATE_WARN(!!encoder->base.crtc != enabled,
11516 "encoder's enabled state mismatch "
11517 "(expected %i, found %i)\n",
11518 !!encoder->base.crtc, enabled);
11520 if (!encoder->base.crtc) {
11523 active = encoder->get_hw_state(encoder, &pipe);
11524 I915_STATE_WARN(active,
11525 "encoder detached but still enabled on pipe %c.\n",
11532 verify_crtc_state(struct drm_crtc *crtc,
11533 struct drm_crtc_state *old_crtc_state,
11534 struct drm_crtc_state *new_crtc_state)
11536 struct drm_device *dev = crtc->dev;
11537 struct drm_i915_private *dev_priv = to_i915(dev);
11538 struct intel_encoder *encoder;
11539 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11540 struct intel_crtc_state *pipe_config, *sw_config;
11541 struct drm_atomic_state *old_state;
11544 old_state = old_crtc_state->state;
11545 __drm_atomic_helper_crtc_destroy_state(old_crtc_state);
11546 pipe_config = to_intel_crtc_state(old_crtc_state);
11547 memset(pipe_config, 0, sizeof(*pipe_config));
11548 pipe_config->base.crtc = crtc;
11549 pipe_config->base.state = old_state;
11551 DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
11553 active = dev_priv->display.get_pipe_config(intel_crtc, pipe_config);
11555 /* we keep both pipes enabled on 830 */
11556 if (IS_I830(dev_priv))
11557 active = new_crtc_state->active;
11559 I915_STATE_WARN(new_crtc_state->active != active,
11560 "crtc active state doesn't match with hw state "
11561 "(expected %i, found %i)\n", new_crtc_state->active, active);
11563 I915_STATE_WARN(intel_crtc->active != new_crtc_state->active,
11564 "transitional active state does not match atomic hw state "
11565 "(expected %i, found %i)\n", new_crtc_state->active, intel_crtc->active);
11567 for_each_encoder_on_crtc(dev, crtc, encoder) {
11570 active = encoder->get_hw_state(encoder, &pipe);
11571 I915_STATE_WARN(active != new_crtc_state->active,
11572 "[ENCODER:%i] active %i with crtc active %i\n",
11573 encoder->base.base.id, active, new_crtc_state->active);
11575 I915_STATE_WARN(active && intel_crtc->pipe != pipe,
11576 "Encoder connected to wrong pipe %c\n",
11580 pipe_config->output_types |= 1 << encoder->type;
11581 encoder->get_config(encoder, pipe_config);
11585 intel_crtc_compute_pixel_rate(pipe_config);
11587 if (!new_crtc_state->active)
11590 intel_pipe_config_sanity_check(dev_priv, pipe_config);
11592 sw_config = to_intel_crtc_state(new_crtc_state);
11593 if (!intel_pipe_config_compare(dev_priv, sw_config,
11594 pipe_config, false)) {
11595 I915_STATE_WARN(1, "pipe state doesn't match!\n");
11596 intel_dump_pipe_config(intel_crtc, pipe_config,
11598 intel_dump_pipe_config(intel_crtc, sw_config,
11604 verify_single_dpll_state(struct drm_i915_private *dev_priv,
11605 struct intel_shared_dpll *pll,
11606 struct drm_crtc *crtc,
11607 struct drm_crtc_state *new_state)
11609 struct intel_dpll_hw_state dpll_hw_state;
11610 unsigned crtc_mask;
11613 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
11615 DRM_DEBUG_KMS("%s\n", pll->name);
11617 active = pll->funcs.get_hw_state(dev_priv, pll, &dpll_hw_state);
11619 if (!(pll->flags & INTEL_DPLL_ALWAYS_ON)) {
11620 I915_STATE_WARN(!pll->on && pll->active_mask,
11621 "pll in active use but not on in sw tracking\n");
11622 I915_STATE_WARN(pll->on && !pll->active_mask,
11623 "pll is on but not used by any active crtc\n");
11624 I915_STATE_WARN(pll->on != active,
11625 "pll on state mismatch (expected %i, found %i)\n",
11630 I915_STATE_WARN(pll->active_mask & ~pll->state.crtc_mask,
11631 "more active pll users than references: %x vs %x\n",
11632 pll->active_mask, pll->state.crtc_mask);
11637 crtc_mask = 1 << drm_crtc_index(crtc);
11639 if (new_state->active)
11640 I915_STATE_WARN(!(pll->active_mask & crtc_mask),
11641 "pll active mismatch (expected pipe %c in active mask 0x%02x)\n",
11642 pipe_name(drm_crtc_index(crtc)), pll->active_mask);
11644 I915_STATE_WARN(pll->active_mask & crtc_mask,
11645 "pll active mismatch (didn't expect pipe %c in active mask 0x%02x)\n",
11646 pipe_name(drm_crtc_index(crtc)), pll->active_mask);
11648 I915_STATE_WARN(!(pll->state.crtc_mask & crtc_mask),
11649 "pll enabled crtcs mismatch (expected 0x%x in 0x%02x)\n",
11650 crtc_mask, pll->state.crtc_mask);
11652 I915_STATE_WARN(pll->on && memcmp(&pll->state.hw_state,
11654 sizeof(dpll_hw_state)),
11655 "pll hw state mismatch\n");
11659 verify_shared_dpll_state(struct drm_device *dev, struct drm_crtc *crtc,
11660 struct drm_crtc_state *old_crtc_state,
11661 struct drm_crtc_state *new_crtc_state)
11663 struct drm_i915_private *dev_priv = to_i915(dev);
11664 struct intel_crtc_state *old_state = to_intel_crtc_state(old_crtc_state);
11665 struct intel_crtc_state *new_state = to_intel_crtc_state(new_crtc_state);
11667 if (new_state->shared_dpll)
11668 verify_single_dpll_state(dev_priv, new_state->shared_dpll, crtc, new_crtc_state);
11670 if (old_state->shared_dpll &&
11671 old_state->shared_dpll != new_state->shared_dpll) {
11672 unsigned crtc_mask = 1 << drm_crtc_index(crtc);
11673 struct intel_shared_dpll *pll = old_state->shared_dpll;
11675 I915_STATE_WARN(pll->active_mask & crtc_mask,
11676 "pll active mismatch (didn't expect pipe %c in active mask)\n",
11677 pipe_name(drm_crtc_index(crtc)));
11678 I915_STATE_WARN(pll->state.crtc_mask & crtc_mask,
11679 "pll enabled crtcs mismatch (found %x in enabled mask)\n",
11680 pipe_name(drm_crtc_index(crtc)));
11685 intel_modeset_verify_crtc(struct drm_crtc *crtc,
11686 struct drm_atomic_state *state,
11687 struct drm_crtc_state *old_state,
11688 struct drm_crtc_state *new_state)
11690 if (!needs_modeset(new_state) &&
11691 !to_intel_crtc_state(new_state)->update_pipe)
11694 verify_wm_state(crtc, new_state);
11695 verify_connector_state(crtc->dev, state, crtc);
11696 verify_crtc_state(crtc, old_state, new_state);
11697 verify_shared_dpll_state(crtc->dev, crtc, old_state, new_state);
11701 verify_disabled_dpll_state(struct drm_device *dev)
11703 struct drm_i915_private *dev_priv = to_i915(dev);
11706 for (i = 0; i < dev_priv->num_shared_dpll; i++)
11707 verify_single_dpll_state(dev_priv, &dev_priv->shared_dplls[i], NULL, NULL);
11711 intel_modeset_verify_disabled(struct drm_device *dev,
11712 struct drm_atomic_state *state)
11714 verify_encoder_state(dev, state);
11715 verify_connector_state(dev, state, NULL);
11716 verify_disabled_dpll_state(dev);
11719 static void update_scanline_offset(struct intel_crtc *crtc)
11721 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
11724 * The scanline counter increments at the leading edge of hsync.
11726 * On most platforms it starts counting from vtotal-1 on the
11727 * first active line. That means the scanline counter value is
11728 * always one less than what we would expect. Ie. just after
11729 * start of vblank, which also occurs at start of hsync (on the
11730 * last active line), the scanline counter will read vblank_start-1.
11732 * On gen2 the scanline counter starts counting from 1 instead
11733 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
11734 * to keep the value positive), instead of adding one.
11736 * On HSW+ the behaviour of the scanline counter depends on the output
11737 * type. For DP ports it behaves like most other platforms, but on HDMI
11738 * there's an extra 1 line difference. So we need to add two instead of
11739 * one to the value.
11741 * On VLV/CHV DSI the scanline counter would appear to increment
11742 * approx. 1/3 of a scanline before start of vblank. Unfortunately
11743 * that means we can't tell whether we're in vblank or not while
11744 * we're on that particular line. We must still set scanline_offset
11745 * to 1 so that the vblank timestamps come out correct when we query
11746 * the scanline counter from within the vblank interrupt handler.
11747 * However if queried just before the start of vblank we'll get an
11748 * answer that's slightly in the future.
11750 if (IS_GEN2(dev_priv)) {
11751 const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
11754 vtotal = adjusted_mode->crtc_vtotal;
11755 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
11758 crtc->scanline_offset = vtotal - 1;
11759 } else if (HAS_DDI(dev_priv) &&
11760 intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI)) {
11761 crtc->scanline_offset = 2;
11763 crtc->scanline_offset = 1;
11766 static void intel_modeset_clear_plls(struct drm_atomic_state *state)
11768 struct drm_device *dev = state->dev;
11769 struct drm_i915_private *dev_priv = to_i915(dev);
11770 struct drm_crtc *crtc;
11771 struct drm_crtc_state *old_crtc_state, *new_crtc_state;
11774 if (!dev_priv->display.crtc_compute_clock)
11777 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
11778 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11779 struct intel_shared_dpll *old_dpll =
11780 to_intel_crtc_state(old_crtc_state)->shared_dpll;
11782 if (!needs_modeset(new_crtc_state))
11785 to_intel_crtc_state(new_crtc_state)->shared_dpll = NULL;
11790 intel_release_shared_dpll(old_dpll, intel_crtc, state);
11795 * This implements the workaround described in the "notes" section of the mode
11796 * set sequence documentation. When going from no pipes or single pipe to
11797 * multiple pipes, and planes are enabled after the pipe, we need to wait at
11798 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
11800 static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
11802 struct drm_crtc_state *crtc_state;
11803 struct intel_crtc *intel_crtc;
11804 struct drm_crtc *crtc;
11805 struct intel_crtc_state *first_crtc_state = NULL;
11806 struct intel_crtc_state *other_crtc_state = NULL;
11807 enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
11810 /* look at all crtc's that are going to be enabled in during modeset */
11811 for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
11812 intel_crtc = to_intel_crtc(crtc);
11814 if (!crtc_state->active || !needs_modeset(crtc_state))
11817 if (first_crtc_state) {
11818 other_crtc_state = to_intel_crtc_state(crtc_state);
11821 first_crtc_state = to_intel_crtc_state(crtc_state);
11822 first_pipe = intel_crtc->pipe;
11826 /* No workaround needed? */
11827 if (!first_crtc_state)
11830 /* w/a possibly needed, check how many crtc's are already enabled. */
11831 for_each_intel_crtc(state->dev, intel_crtc) {
11832 struct intel_crtc_state *pipe_config;
11834 pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
11835 if (IS_ERR(pipe_config))
11836 return PTR_ERR(pipe_config);
11838 pipe_config->hsw_workaround_pipe = INVALID_PIPE;
11840 if (!pipe_config->base.active ||
11841 needs_modeset(&pipe_config->base))
11844 /* 2 or more enabled crtcs means no need for w/a */
11845 if (enabled_pipe != INVALID_PIPE)
11848 enabled_pipe = intel_crtc->pipe;
11851 if (enabled_pipe != INVALID_PIPE)
11852 first_crtc_state->hsw_workaround_pipe = enabled_pipe;
11853 else if (other_crtc_state)
11854 other_crtc_state->hsw_workaround_pipe = first_pipe;
11859 static int intel_lock_all_pipes(struct drm_atomic_state *state)
11861 struct drm_crtc *crtc;
11863 /* Add all pipes to the state */
11864 for_each_crtc(state->dev, crtc) {
11865 struct drm_crtc_state *crtc_state;
11867 crtc_state = drm_atomic_get_crtc_state(state, crtc);
11868 if (IS_ERR(crtc_state))
11869 return PTR_ERR(crtc_state);
11875 static int intel_modeset_all_pipes(struct drm_atomic_state *state)
11877 struct drm_crtc *crtc;
11880 * Add all pipes to the state, and force
11881 * a modeset on all the active ones.
11883 for_each_crtc(state->dev, crtc) {
11884 struct drm_crtc_state *crtc_state;
11887 crtc_state = drm_atomic_get_crtc_state(state, crtc);
11888 if (IS_ERR(crtc_state))
11889 return PTR_ERR(crtc_state);
11891 if (!crtc_state->active || needs_modeset(crtc_state))
11894 crtc_state->mode_changed = true;
11896 ret = drm_atomic_add_affected_connectors(state, crtc);
11900 ret = drm_atomic_add_affected_planes(state, crtc);
11908 static int intel_modeset_checks(struct drm_atomic_state *state)
11910 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
11911 struct drm_i915_private *dev_priv = to_i915(state->dev);
11912 struct drm_crtc *crtc;
11913 struct drm_crtc_state *old_crtc_state, *new_crtc_state;
11916 if (!check_digital_port_conflicts(state)) {
11917 DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
11921 intel_state->modeset = true;
11922 intel_state->active_crtcs = dev_priv->active_crtcs;
11923 intel_state->cdclk.logical = dev_priv->cdclk.logical;
11924 intel_state->cdclk.actual = dev_priv->cdclk.actual;
11926 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
11927 if (new_crtc_state->active)
11928 intel_state->active_crtcs |= 1 << i;
11930 intel_state->active_crtcs &= ~(1 << i);
11932 if (old_crtc_state->active != new_crtc_state->active)
11933 intel_state->active_pipe_changes |= drm_crtc_mask(crtc);
11937 * See if the config requires any additional preparation, e.g.
11938 * to adjust global state with pipes off. We need to do this
11939 * here so we can get the modeset_pipe updated config for the new
11940 * mode set on this crtc. For other crtcs we need to use the
11941 * adjusted_mode bits in the crtc directly.
11943 if (dev_priv->display.modeset_calc_cdclk) {
11944 ret = dev_priv->display.modeset_calc_cdclk(state);
11949 * Writes to dev_priv->cdclk.logical must protected by
11950 * holding all the crtc locks, even if we don't end up
11951 * touching the hardware
11953 if (!intel_cdclk_state_compare(&dev_priv->cdclk.logical,
11954 &intel_state->cdclk.logical)) {
11955 ret = intel_lock_all_pipes(state);
11960 /* All pipes must be switched off while we change the cdclk. */
11961 if (!intel_cdclk_state_compare(&dev_priv->cdclk.actual,
11962 &intel_state->cdclk.actual)) {
11963 ret = intel_modeset_all_pipes(state);
11968 DRM_DEBUG_KMS("New cdclk calculated to be logical %u kHz, actual %u kHz\n",
11969 intel_state->cdclk.logical.cdclk,
11970 intel_state->cdclk.actual.cdclk);
11972 to_intel_atomic_state(state)->cdclk.logical = dev_priv->cdclk.logical;
11975 intel_modeset_clear_plls(state);
11977 if (IS_HASWELL(dev_priv))
11978 return haswell_mode_set_planes_workaround(state);
11984 * Handle calculation of various watermark data at the end of the atomic check
11985 * phase. The code here should be run after the per-crtc and per-plane 'check'
11986 * handlers to ensure that all derived state has been updated.
11988 static int calc_watermark_data(struct drm_atomic_state *state)
11990 struct drm_device *dev = state->dev;
11991 struct drm_i915_private *dev_priv = to_i915(dev);
11993 /* Is there platform-specific watermark information to calculate? */
11994 if (dev_priv->display.compute_global_watermarks)
11995 return dev_priv->display.compute_global_watermarks(state);
12001 * intel_atomic_check - validate state object
12003 * @state: state to validate
12005 static int intel_atomic_check(struct drm_device *dev,
12006 struct drm_atomic_state *state)
12008 struct drm_i915_private *dev_priv = to_i915(dev);
12009 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
12010 struct drm_crtc *crtc;
12011 struct drm_crtc_state *old_crtc_state, *crtc_state;
12013 bool any_ms = false;
12015 ret = drm_atomic_helper_check_modeset(dev, state);
12019 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, crtc_state, i) {
12020 struct intel_crtc_state *pipe_config =
12021 to_intel_crtc_state(crtc_state);
12023 /* Catch I915_MODE_FLAG_INHERITED */
12024 if (crtc_state->mode.private_flags != old_crtc_state->mode.private_flags)
12025 crtc_state->mode_changed = true;
12027 if (!needs_modeset(crtc_state))
12030 if (!crtc_state->enable) {
12035 /* FIXME: For only active_changed we shouldn't need to do any
12036 * state recomputation at all. */
12038 ret = drm_atomic_add_affected_connectors(state, crtc);
12042 ret = intel_modeset_pipe_config(crtc, pipe_config);
12044 intel_dump_pipe_config(to_intel_crtc(crtc),
12045 pipe_config, "[failed]");
12049 if (i915_modparams.fastboot &&
12050 intel_pipe_config_compare(dev_priv,
12051 to_intel_crtc_state(old_crtc_state),
12052 pipe_config, true)) {
12053 crtc_state->mode_changed = false;
12054 pipe_config->update_pipe = true;
12057 if (needs_modeset(crtc_state))
12060 ret = drm_atomic_add_affected_planes(state, crtc);
12064 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
12065 needs_modeset(crtc_state) ?
12066 "[modeset]" : "[fastset]");
12070 ret = intel_modeset_checks(state);
12075 intel_state->cdclk.logical = dev_priv->cdclk.logical;
12078 ret = drm_atomic_helper_check_planes(dev, state);
12082 intel_fbc_choose_crtc(dev_priv, state);
12083 return calc_watermark_data(state);
12086 static int intel_atomic_prepare_commit(struct drm_device *dev,
12087 struct drm_atomic_state *state)
12089 return drm_atomic_helper_prepare_planes(dev, state);
12092 u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
12094 struct drm_device *dev = crtc->base.dev;
12096 if (!dev->max_vblank_count)
12097 return drm_crtc_accurate_vblank_count(&crtc->base);
12099 return dev->driver->get_vblank_counter(dev, crtc->pipe);
12102 static void intel_update_crtc(struct drm_crtc *crtc,
12103 struct drm_atomic_state *state,
12104 struct drm_crtc_state *old_crtc_state,
12105 struct drm_crtc_state *new_crtc_state)
12107 struct drm_device *dev = crtc->dev;
12108 struct drm_i915_private *dev_priv = to_i915(dev);
12109 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12110 struct intel_crtc_state *pipe_config = to_intel_crtc_state(new_crtc_state);
12111 bool modeset = needs_modeset(new_crtc_state);
12114 update_scanline_offset(intel_crtc);
12115 dev_priv->display.crtc_enable(pipe_config, state);
12117 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state),
12121 if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
12123 intel_crtc, pipe_config,
12124 to_intel_plane_state(crtc->primary->state));
12127 drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
12130 static void intel_update_crtcs(struct drm_atomic_state *state)
12132 struct drm_crtc *crtc;
12133 struct drm_crtc_state *old_crtc_state, *new_crtc_state;
12136 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
12137 if (!new_crtc_state->active)
12140 intel_update_crtc(crtc, state, old_crtc_state,
12145 static void skl_update_crtcs(struct drm_atomic_state *state)
12147 struct drm_i915_private *dev_priv = to_i915(state->dev);
12148 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
12149 struct drm_crtc *crtc;
12150 struct intel_crtc *intel_crtc;
12151 struct drm_crtc_state *old_crtc_state, *new_crtc_state;
12152 struct intel_crtc_state *cstate;
12153 unsigned int updated = 0;
12158 const struct skl_ddb_entry *entries[I915_MAX_PIPES] = {};
12160 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i)
12161 /* ignore allocations for crtc's that have been turned off. */
12162 if (new_crtc_state->active)
12163 entries[i] = &to_intel_crtc_state(old_crtc_state)->wm.skl.ddb;
12166 * Whenever the number of active pipes changes, we need to make sure we
12167 * update the pipes in the right order so that their ddb allocations
12168 * never overlap with eachother inbetween CRTC updates. Otherwise we'll
12169 * cause pipe underruns and other bad stuff.
12174 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
12175 bool vbl_wait = false;
12176 unsigned int cmask = drm_crtc_mask(crtc);
12178 intel_crtc = to_intel_crtc(crtc);
12179 cstate = to_intel_crtc_state(new_crtc_state);
12180 pipe = intel_crtc->pipe;
12182 if (updated & cmask || !cstate->base.active)
12185 if (skl_ddb_allocation_overlaps(dev_priv,
12187 &cstate->wm.skl.ddb,
12192 entries[i] = &cstate->wm.skl.ddb;
12195 * If this is an already active pipe, it's DDB changed,
12196 * and this isn't the last pipe that needs updating
12197 * then we need to wait for a vblank to pass for the
12198 * new ddb allocation to take effect.
12200 if (!skl_ddb_entry_equal(&cstate->wm.skl.ddb,
12201 &to_intel_crtc_state(old_crtc_state)->wm.skl.ddb) &&
12202 !new_crtc_state->active_changed &&
12203 intel_state->wm_results.dirty_pipes != updated)
12206 intel_update_crtc(crtc, state, old_crtc_state,
12210 intel_wait_for_vblank(dev_priv, pipe);
12214 } while (progress);
12217 static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
12219 struct intel_atomic_state *state, *next;
12220 struct llist_node *freed;
12222 freed = llist_del_all(&dev_priv->atomic_helper.free_list);
12223 llist_for_each_entry_safe(state, next, freed, freed)
12224 drm_atomic_state_put(&state->base);
12227 static void intel_atomic_helper_free_state_worker(struct work_struct *work)
12229 struct drm_i915_private *dev_priv =
12230 container_of(work, typeof(*dev_priv), atomic_helper.free_work);
12232 intel_atomic_helper_free_state(dev_priv);
12235 static void intel_atomic_commit_fence_wait(struct intel_atomic_state *intel_state)
12237 struct wait_queue_entry wait_fence, wait_reset;
12238 struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev);
12240 init_wait_entry(&wait_fence, 0);
12241 init_wait_entry(&wait_reset, 0);
12243 prepare_to_wait(&intel_state->commit_ready.wait,
12244 &wait_fence, TASK_UNINTERRUPTIBLE);
12245 prepare_to_wait(&dev_priv->gpu_error.wait_queue,
12246 &wait_reset, TASK_UNINTERRUPTIBLE);
12249 if (i915_sw_fence_done(&intel_state->commit_ready)
12250 || test_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags))
12255 finish_wait(&intel_state->commit_ready.wait, &wait_fence);
12256 finish_wait(&dev_priv->gpu_error.wait_queue, &wait_reset);
12259 static void intel_atomic_commit_tail(struct drm_atomic_state *state)
12261 struct drm_device *dev = state->dev;
12262 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
12263 struct drm_i915_private *dev_priv = to_i915(dev);
12264 struct drm_crtc_state *old_crtc_state, *new_crtc_state;
12265 struct drm_crtc *crtc;
12266 struct intel_crtc_state *intel_cstate;
12267 u64 put_domains[I915_MAX_PIPES] = {};
12270 intel_atomic_commit_fence_wait(intel_state);
12272 drm_atomic_helper_wait_for_dependencies(state);
12274 if (intel_state->modeset)
12275 intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
12277 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
12278 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12280 if (needs_modeset(new_crtc_state) ||
12281 to_intel_crtc_state(new_crtc_state)->update_pipe) {
12283 put_domains[to_intel_crtc(crtc)->pipe] =
12284 modeset_get_crtc_power_domains(crtc,
12285 to_intel_crtc_state(new_crtc_state));
12288 if (!needs_modeset(new_crtc_state))
12291 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state),
12292 to_intel_crtc_state(new_crtc_state));
12294 if (old_crtc_state->active) {
12295 intel_crtc_disable_planes(crtc, old_crtc_state->plane_mask);
12296 dev_priv->display.crtc_disable(to_intel_crtc_state(old_crtc_state), state);
12297 intel_crtc->active = false;
12298 intel_fbc_disable(intel_crtc);
12299 intel_disable_shared_dpll(intel_crtc);
12302 * Underruns don't always raise
12303 * interrupts, so check manually.
12305 intel_check_cpu_fifo_underruns(dev_priv);
12306 intel_check_pch_fifo_underruns(dev_priv);
12308 if (!new_crtc_state->active) {
12310 * Make sure we don't call initial_watermarks
12311 * for ILK-style watermark updates.
12313 * No clue what this is supposed to achieve.
12315 if (INTEL_GEN(dev_priv) >= 9)
12316 dev_priv->display.initial_watermarks(intel_state,
12317 to_intel_crtc_state(new_crtc_state));
12322 /* Only after disabling all output pipelines that will be changed can we
12323 * update the the output configuration. */
12324 intel_modeset_update_crtc_state(state);
12326 if (intel_state->modeset) {
12327 drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
12329 intel_set_cdclk(dev_priv, &dev_priv->cdclk.actual);
12332 * SKL workaround: bspec recommends we disable the SAGV when we
12333 * have more then one pipe enabled
12335 if (!intel_can_enable_sagv(state))
12336 intel_disable_sagv(dev_priv);
12338 intel_modeset_verify_disabled(dev, state);
12341 /* Complete the events for pipes that have now been disabled */
12342 for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
12343 bool modeset = needs_modeset(new_crtc_state);
12345 /* Complete events for now disable pipes here. */
12346 if (modeset && !new_crtc_state->active && new_crtc_state->event) {
12347 spin_lock_irq(&dev->event_lock);
12348 drm_crtc_send_vblank_event(crtc, new_crtc_state->event);
12349 spin_unlock_irq(&dev->event_lock);
12351 new_crtc_state->event = NULL;
12355 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
12356 dev_priv->display.update_crtcs(state);
12358 /* FIXME: We should call drm_atomic_helper_commit_hw_done() here
12359 * already, but still need the state for the delayed optimization. To
12361 * - wrap the optimization/post_plane_update stuff into a per-crtc work.
12362 * - schedule that vblank worker _before_ calling hw_done
12363 * - at the start of commit_tail, cancel it _synchrously
12364 * - switch over to the vblank wait helper in the core after that since
12365 * we don't need out special handling any more.
12367 drm_atomic_helper_wait_for_flip_done(dev, state);
12370 * Now that the vblank has passed, we can go ahead and program the
12371 * optimal watermarks on platforms that need two-step watermark
12374 * TODO: Move this (and other cleanup) to an async worker eventually.
12376 for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
12377 intel_cstate = to_intel_crtc_state(new_crtc_state);
12379 if (dev_priv->display.optimize_watermarks)
12380 dev_priv->display.optimize_watermarks(intel_state,
12384 for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
12385 intel_post_plane_update(to_intel_crtc_state(old_crtc_state));
12387 if (put_domains[i])
12388 modeset_put_power_domains(dev_priv, put_domains[i]);
12390 intel_modeset_verify_crtc(crtc, state, old_crtc_state, new_crtc_state);
12393 if (intel_state->modeset && intel_can_enable_sagv(state))
12394 intel_enable_sagv(dev_priv);
12396 drm_atomic_helper_commit_hw_done(state);
12398 if (intel_state->modeset) {
12399 /* As one of the primary mmio accessors, KMS has a high
12400 * likelihood of triggering bugs in unclaimed access. After we
12401 * finish modesetting, see if an error has been flagged, and if
12402 * so enable debugging for the next modeset - and hope we catch
12405 intel_uncore_arm_unclaimed_mmio_detection(dev_priv);
12406 intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET);
12409 drm_atomic_helper_cleanup_planes(dev, state);
12411 drm_atomic_helper_commit_cleanup_done(state);
12413 drm_atomic_state_put(state);
12415 intel_atomic_helper_free_state(dev_priv);
12418 static void intel_atomic_commit_work(struct work_struct *work)
12420 struct drm_atomic_state *state =
12421 container_of(work, struct drm_atomic_state, commit_work);
12423 intel_atomic_commit_tail(state);
12426 static int __i915_sw_fence_call
12427 intel_atomic_commit_ready(struct i915_sw_fence *fence,
12428 enum i915_sw_fence_notify notify)
12430 struct intel_atomic_state *state =
12431 container_of(fence, struct intel_atomic_state, commit_ready);
12434 case FENCE_COMPLETE:
12435 /* we do blocking waits in the worker, nothing to do here */
12439 struct intel_atomic_helper *helper =
12440 &to_i915(state->base.dev)->atomic_helper;
12442 if (llist_add(&state->freed, &helper->free_list))
12443 schedule_work(&helper->free_work);
12448 return NOTIFY_DONE;
12451 static void intel_atomic_track_fbs(struct drm_atomic_state *state)
12453 struct drm_plane_state *old_plane_state, *new_plane_state;
12454 struct drm_plane *plane;
12457 for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i)
12458 i915_gem_track_fb(intel_fb_obj(old_plane_state->fb),
12459 intel_fb_obj(new_plane_state->fb),
12460 to_intel_plane(plane)->frontbuffer_bit);
12464 * intel_atomic_commit - commit validated state object
12466 * @state: the top-level driver state object
12467 * @nonblock: nonblocking commit
12469 * This function commits a top-level state object that has been validated
12470 * with drm_atomic_helper_check().
12473 * Zero for success or -errno.
12475 static int intel_atomic_commit(struct drm_device *dev,
12476 struct drm_atomic_state *state,
12479 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
12480 struct drm_i915_private *dev_priv = to_i915(dev);
12483 drm_atomic_state_get(state);
12484 i915_sw_fence_init(&intel_state->commit_ready,
12485 intel_atomic_commit_ready);
12488 * The intel_legacy_cursor_update() fast path takes care
12489 * of avoiding the vblank waits for simple cursor
12490 * movement and flips. For cursor on/off and size changes,
12491 * we want to perform the vblank waits so that watermark
12492 * updates happen during the correct frames. Gen9+ have
12493 * double buffered watermarks and so shouldn't need this.
12495 * Unset state->legacy_cursor_update before the call to
12496 * drm_atomic_helper_setup_commit() because otherwise
12497 * drm_atomic_helper_wait_for_flip_done() is a noop and
12498 * we get FIFO underruns because we didn't wait
12501 * FIXME doing watermarks and fb cleanup from a vblank worker
12502 * (assuming we had any) would solve these problems.
12504 if (INTEL_GEN(dev_priv) < 9 && state->legacy_cursor_update) {
12505 struct intel_crtc_state *new_crtc_state;
12506 struct intel_crtc *crtc;
12509 for_each_new_intel_crtc_in_state(intel_state, crtc, new_crtc_state, i)
12510 if (new_crtc_state->wm.need_postvbl_update ||
12511 new_crtc_state->update_wm_post)
12512 state->legacy_cursor_update = false;
12515 ret = intel_atomic_prepare_commit(dev, state);
12517 DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
12518 i915_sw_fence_commit(&intel_state->commit_ready);
12522 ret = drm_atomic_helper_setup_commit(state, nonblock);
12524 ret = drm_atomic_helper_swap_state(state, true);
12527 i915_sw_fence_commit(&intel_state->commit_ready);
12529 drm_atomic_helper_cleanup_planes(dev, state);
12532 dev_priv->wm.distrust_bios_wm = false;
12533 intel_shared_dpll_swap_state(state);
12534 intel_atomic_track_fbs(state);
12536 if (intel_state->modeset) {
12537 memcpy(dev_priv->min_cdclk, intel_state->min_cdclk,
12538 sizeof(intel_state->min_cdclk));
12539 dev_priv->active_crtcs = intel_state->active_crtcs;
12540 dev_priv->cdclk.logical = intel_state->cdclk.logical;
12541 dev_priv->cdclk.actual = intel_state->cdclk.actual;
12544 drm_atomic_state_get(state);
12545 INIT_WORK(&state->commit_work, intel_atomic_commit_work);
12547 i915_sw_fence_commit(&intel_state->commit_ready);
12549 queue_work(system_unbound_wq, &state->commit_work);
12551 intel_atomic_commit_tail(state);
12557 static const struct drm_crtc_funcs intel_crtc_funcs = {
12558 .gamma_set = drm_atomic_helper_legacy_gamma_set,
12559 .set_config = drm_atomic_helper_set_config,
12560 .destroy = intel_crtc_destroy,
12561 .page_flip = drm_atomic_helper_page_flip,
12562 .atomic_duplicate_state = intel_crtc_duplicate_state,
12563 .atomic_destroy_state = intel_crtc_destroy_state,
12564 .set_crc_source = intel_crtc_set_crc_source,
12567 struct wait_rps_boost {
12568 struct wait_queue_entry wait;
12570 struct drm_crtc *crtc;
12571 struct drm_i915_gem_request *request;
12574 static int do_rps_boost(struct wait_queue_entry *_wait,
12575 unsigned mode, int sync, void *key)
12577 struct wait_rps_boost *wait = container_of(_wait, typeof(*wait), wait);
12578 struct drm_i915_gem_request *rq = wait->request;
12580 gen6_rps_boost(rq, NULL);
12581 i915_gem_request_put(rq);
12583 drm_crtc_vblank_put(wait->crtc);
12585 list_del(&wait->wait.entry);
12590 static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
12591 struct dma_fence *fence)
12593 struct wait_rps_boost *wait;
12595 if (!dma_fence_is_i915(fence))
12598 if (INTEL_GEN(to_i915(crtc->dev)) < 6)
12601 if (drm_crtc_vblank_get(crtc))
12604 wait = kmalloc(sizeof(*wait), GFP_KERNEL);
12606 drm_crtc_vblank_put(crtc);
12610 wait->request = to_request(dma_fence_get(fence));
12613 wait->wait.func = do_rps_boost;
12614 wait->wait.flags = 0;
12616 add_wait_queue(drm_crtc_vblank_waitqueue(crtc), &wait->wait);
12620 * intel_prepare_plane_fb - Prepare fb for usage on plane
12621 * @plane: drm plane to prepare for
12622 * @fb: framebuffer to prepare for presentation
12624 * Prepares a framebuffer for usage on a display plane. Generally this
12625 * involves pinning the underlying object and updating the frontbuffer tracking
12626 * bits. Some older platforms need special physical address handling for
12629 * Must be called with struct_mutex held.
12631 * Returns 0 on success, negative error code on failure.
12634 intel_prepare_plane_fb(struct drm_plane *plane,
12635 struct drm_plane_state *new_state)
12637 struct intel_atomic_state *intel_state =
12638 to_intel_atomic_state(new_state->state);
12639 struct drm_i915_private *dev_priv = to_i915(plane->dev);
12640 struct drm_framebuffer *fb = new_state->fb;
12641 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
12642 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->state->fb);
12646 struct drm_crtc_state *crtc_state =
12647 drm_atomic_get_existing_crtc_state(new_state->state,
12648 plane->state->crtc);
12650 /* Big Hammer, we also need to ensure that any pending
12651 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
12652 * current scanout is retired before unpinning the old
12653 * framebuffer. Note that we rely on userspace rendering
12654 * into the buffer attached to the pipe they are waiting
12655 * on. If not, userspace generates a GPU hang with IPEHR
12656 * point to the MI_WAIT_FOR_EVENT.
12658 * This should only fail upon a hung GPU, in which case we
12659 * can safely continue.
12661 if (needs_modeset(crtc_state)) {
12662 ret = i915_sw_fence_await_reservation(&intel_state->commit_ready,
12663 old_obj->resv, NULL,
12671 if (new_state->fence) { /* explicit fencing */
12672 ret = i915_sw_fence_await_dma_fence(&intel_state->commit_ready,
12674 I915_FENCE_TIMEOUT,
12683 ret = i915_gem_object_pin_pages(obj);
12687 ret = mutex_lock_interruptible(&dev_priv->drm.struct_mutex);
12689 i915_gem_object_unpin_pages(obj);
12693 if (plane->type == DRM_PLANE_TYPE_CURSOR &&
12694 INTEL_INFO(dev_priv)->cursor_needs_physical) {
12695 const int align = intel_cursor_alignment(dev_priv);
12697 ret = i915_gem_object_attach_phys(obj, align);
12699 struct i915_vma *vma;
12701 vma = intel_pin_and_fence_fb_obj(fb, new_state->rotation);
12703 to_intel_plane_state(new_state)->vma = vma;
12705 ret = PTR_ERR(vma);
12708 i915_gem_object_wait_priority(obj, 0, I915_PRIORITY_DISPLAY);
12710 mutex_unlock(&dev_priv->drm.struct_mutex);
12711 i915_gem_object_unpin_pages(obj);
12715 if (!new_state->fence) { /* implicit fencing */
12716 struct dma_fence *fence;
12718 ret = i915_sw_fence_await_reservation(&intel_state->commit_ready,
12720 false, I915_FENCE_TIMEOUT,
12725 fence = reservation_object_get_excl_rcu(obj->resv);
12727 add_rps_boost_after_vblank(new_state->crtc, fence);
12728 dma_fence_put(fence);
12731 add_rps_boost_after_vblank(new_state->crtc, new_state->fence);
12738 * intel_cleanup_plane_fb - Cleans up an fb after plane use
12739 * @plane: drm plane to clean up for
12740 * @fb: old framebuffer that was on plane
12742 * Cleans up a framebuffer that has just been removed from a plane.
12744 * Must be called with struct_mutex held.
12747 intel_cleanup_plane_fb(struct drm_plane *plane,
12748 struct drm_plane_state *old_state)
12750 struct i915_vma *vma;
12752 /* Should only be called after a successful intel_prepare_plane_fb()! */
12753 vma = fetch_and_zero(&to_intel_plane_state(old_state)->vma);
12755 mutex_lock(&plane->dev->struct_mutex);
12756 intel_unpin_fb_vma(vma);
12757 mutex_unlock(&plane->dev->struct_mutex);
12762 skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
12764 struct drm_i915_private *dev_priv;
12766 int crtc_clock, max_dotclk;
12768 if (!intel_crtc || !crtc_state->base.enable)
12769 return DRM_PLANE_HELPER_NO_SCALING;
12771 dev_priv = to_i915(intel_crtc->base.dev);
12773 crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
12774 max_dotclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk;
12776 if (IS_GEMINILAKE(dev_priv))
12779 if (WARN_ON_ONCE(!crtc_clock || max_dotclk < crtc_clock))
12780 return DRM_PLANE_HELPER_NO_SCALING;
12783 * skl max scale is lower of:
12784 * close to 3 but not 3, -1 is for that purpose
12788 max_scale = min((1 << 16) * 3 - 1,
12789 (1 << 8) * ((max_dotclk << 8) / crtc_clock));
12795 intel_check_primary_plane(struct intel_plane *plane,
12796 struct intel_crtc_state *crtc_state,
12797 struct intel_plane_state *state)
12799 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
12800 struct drm_crtc *crtc = state->base.crtc;
12801 int min_scale = DRM_PLANE_HELPER_NO_SCALING;
12802 int max_scale = DRM_PLANE_HELPER_NO_SCALING;
12803 bool can_position = false;
12806 if (INTEL_GEN(dev_priv) >= 9) {
12807 /* use scaler when colorkey is not required */
12808 if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
12810 max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
12812 can_position = true;
12815 ret = drm_plane_helper_check_state(&state->base,
12817 min_scale, max_scale,
12818 can_position, true);
12822 if (!state->base.fb)
12825 if (INTEL_GEN(dev_priv) >= 9) {
12826 ret = skl_check_plane_surface(state);
12830 state->ctl = skl_plane_ctl(crtc_state, state);
12832 ret = i9xx_check_plane_surface(state);
12836 state->ctl = i9xx_plane_ctl(crtc_state, state);
12842 static void intel_begin_crtc_commit(struct drm_crtc *crtc,
12843 struct drm_crtc_state *old_crtc_state)
12845 struct drm_device *dev = crtc->dev;
12846 struct drm_i915_private *dev_priv = to_i915(dev);
12847 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12848 struct intel_crtc_state *old_intel_cstate =
12849 to_intel_crtc_state(old_crtc_state);
12850 struct intel_atomic_state *old_intel_state =
12851 to_intel_atomic_state(old_crtc_state->state);
12852 struct intel_crtc_state *intel_cstate =
12853 intel_atomic_get_new_crtc_state(old_intel_state, intel_crtc);
12854 bool modeset = needs_modeset(&intel_cstate->base);
12857 (intel_cstate->base.color_mgmt_changed ||
12858 intel_cstate->update_pipe)) {
12859 intel_color_set_csc(&intel_cstate->base);
12860 intel_color_load_luts(&intel_cstate->base);
12863 /* Perform vblank evasion around commit operation */
12864 intel_pipe_update_start(intel_cstate);
12869 if (intel_cstate->update_pipe)
12870 intel_update_pipe_config(old_intel_cstate, intel_cstate);
12871 else if (INTEL_GEN(dev_priv) >= 9)
12872 skl_detach_scalers(intel_crtc);
12875 if (dev_priv->display.atomic_update_watermarks)
12876 dev_priv->display.atomic_update_watermarks(old_intel_state,
12880 static void intel_finish_crtc_commit(struct drm_crtc *crtc,
12881 struct drm_crtc_state *old_crtc_state)
12883 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12884 struct intel_atomic_state *old_intel_state =
12885 to_intel_atomic_state(old_crtc_state->state);
12886 struct intel_crtc_state *new_crtc_state =
12887 intel_atomic_get_new_crtc_state(old_intel_state, intel_crtc);
12889 intel_pipe_update_end(new_crtc_state);
12893 * intel_plane_destroy - destroy a plane
12894 * @plane: plane to destroy
12896 * Common destruction function for all types of planes (primary, cursor,
12899 void intel_plane_destroy(struct drm_plane *plane)
12901 drm_plane_cleanup(plane);
12902 kfree(to_intel_plane(plane));
12905 static bool i8xx_mod_supported(uint32_t format, uint64_t modifier)
12908 case DRM_FORMAT_C8:
12909 case DRM_FORMAT_RGB565:
12910 case DRM_FORMAT_XRGB1555:
12911 case DRM_FORMAT_XRGB8888:
12912 return modifier == DRM_FORMAT_MOD_LINEAR ||
12913 modifier == I915_FORMAT_MOD_X_TILED;
12919 static bool i965_mod_supported(uint32_t format, uint64_t modifier)
12922 case DRM_FORMAT_C8:
12923 case DRM_FORMAT_RGB565:
12924 case DRM_FORMAT_XRGB8888:
12925 case DRM_FORMAT_XBGR8888:
12926 case DRM_FORMAT_XRGB2101010:
12927 case DRM_FORMAT_XBGR2101010:
12928 return modifier == DRM_FORMAT_MOD_LINEAR ||
12929 modifier == I915_FORMAT_MOD_X_TILED;
12935 static bool skl_mod_supported(uint32_t format, uint64_t modifier)
12938 case DRM_FORMAT_XRGB8888:
12939 case DRM_FORMAT_XBGR8888:
12940 case DRM_FORMAT_ARGB8888:
12941 case DRM_FORMAT_ABGR8888:
12942 if (modifier == I915_FORMAT_MOD_Yf_TILED_CCS ||
12943 modifier == I915_FORMAT_MOD_Y_TILED_CCS)
12946 case DRM_FORMAT_RGB565:
12947 case DRM_FORMAT_XRGB2101010:
12948 case DRM_FORMAT_XBGR2101010:
12949 case DRM_FORMAT_YUYV:
12950 case DRM_FORMAT_YVYU:
12951 case DRM_FORMAT_UYVY:
12952 case DRM_FORMAT_VYUY:
12953 if (modifier == I915_FORMAT_MOD_Yf_TILED)
12956 case DRM_FORMAT_C8:
12957 if (modifier == DRM_FORMAT_MOD_LINEAR ||
12958 modifier == I915_FORMAT_MOD_X_TILED ||
12959 modifier == I915_FORMAT_MOD_Y_TILED)
12967 static bool intel_primary_plane_format_mod_supported(struct drm_plane *plane,
12971 struct drm_i915_private *dev_priv = to_i915(plane->dev);
12973 if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
12976 if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_INTEL &&
12977 modifier != DRM_FORMAT_MOD_LINEAR)
12980 if (INTEL_GEN(dev_priv) >= 9)
12981 return skl_mod_supported(format, modifier);
12982 else if (INTEL_GEN(dev_priv) >= 4)
12983 return i965_mod_supported(format, modifier);
12985 return i8xx_mod_supported(format, modifier);
12990 static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane,
12994 if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
12997 return modifier == DRM_FORMAT_MOD_LINEAR && format == DRM_FORMAT_ARGB8888;
13000 static struct drm_plane_funcs intel_plane_funcs = {
13001 .update_plane = drm_atomic_helper_update_plane,
13002 .disable_plane = drm_atomic_helper_disable_plane,
13003 .destroy = intel_plane_destroy,
13004 .atomic_get_property = intel_plane_atomic_get_property,
13005 .atomic_set_property = intel_plane_atomic_set_property,
13006 .atomic_duplicate_state = intel_plane_duplicate_state,
13007 .atomic_destroy_state = intel_plane_destroy_state,
13008 .format_mod_supported = intel_primary_plane_format_mod_supported,
13012 intel_legacy_cursor_update(struct drm_plane *plane,
13013 struct drm_crtc *crtc,
13014 struct drm_framebuffer *fb,
13015 int crtc_x, int crtc_y,
13016 unsigned int crtc_w, unsigned int crtc_h,
13017 uint32_t src_x, uint32_t src_y,
13018 uint32_t src_w, uint32_t src_h,
13019 struct drm_modeset_acquire_ctx *ctx)
13021 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
13023 struct drm_plane_state *old_plane_state, *new_plane_state;
13024 struct intel_plane *intel_plane = to_intel_plane(plane);
13025 struct drm_framebuffer *old_fb;
13026 struct drm_crtc_state *crtc_state = crtc->state;
13027 struct i915_vma *old_vma, *vma;
13030 * When crtc is inactive or there is a modeset pending,
13031 * wait for it to complete in the slowpath
13033 if (!crtc_state->active || needs_modeset(crtc_state) ||
13034 to_intel_crtc_state(crtc_state)->update_pipe)
13037 old_plane_state = plane->state;
13039 * Don't do an async update if there is an outstanding commit modifying
13040 * the plane. This prevents our async update's changes from getting
13041 * overridden by a previous synchronous update's state.
13043 if (old_plane_state->commit &&
13044 !try_wait_for_completion(&old_plane_state->commit->hw_done))
13048 * If any parameters change that may affect watermarks,
13049 * take the slowpath. Only changing fb or position should be
13052 if (old_plane_state->crtc != crtc ||
13053 old_plane_state->src_w != src_w ||
13054 old_plane_state->src_h != src_h ||
13055 old_plane_state->crtc_w != crtc_w ||
13056 old_plane_state->crtc_h != crtc_h ||
13057 !old_plane_state->fb != !fb)
13060 new_plane_state = intel_plane_duplicate_state(plane);
13061 if (!new_plane_state)
13064 drm_atomic_set_fb_for_plane(new_plane_state, fb);
13066 new_plane_state->src_x = src_x;
13067 new_plane_state->src_y = src_y;
13068 new_plane_state->src_w = src_w;
13069 new_plane_state->src_h = src_h;
13070 new_plane_state->crtc_x = crtc_x;
13071 new_plane_state->crtc_y = crtc_y;
13072 new_plane_state->crtc_w = crtc_w;
13073 new_plane_state->crtc_h = crtc_h;
13075 ret = intel_plane_atomic_check_with_state(to_intel_crtc_state(crtc->state),
13076 to_intel_crtc_state(crtc->state), /* FIXME need a new crtc state? */
13077 to_intel_plane_state(plane->state),
13078 to_intel_plane_state(new_plane_state));
13082 ret = mutex_lock_interruptible(&dev_priv->drm.struct_mutex);
13086 if (INTEL_INFO(dev_priv)->cursor_needs_physical) {
13087 int align = intel_cursor_alignment(dev_priv);
13089 ret = i915_gem_object_attach_phys(intel_fb_obj(fb), align);
13091 DRM_DEBUG_KMS("failed to attach phys object\n");
13095 vma = intel_pin_and_fence_fb_obj(fb, new_plane_state->rotation);
13097 DRM_DEBUG_KMS("failed to pin object\n");
13099 ret = PTR_ERR(vma);
13103 to_intel_plane_state(new_plane_state)->vma = vma;
13106 old_fb = old_plane_state->fb;
13108 i915_gem_track_fb(intel_fb_obj(old_fb), intel_fb_obj(fb),
13109 intel_plane->frontbuffer_bit);
13111 /* Swap plane state */
13112 plane->state = new_plane_state;
13114 if (plane->state->visible) {
13115 trace_intel_update_plane(plane, to_intel_crtc(crtc));
13116 intel_plane->update_plane(intel_plane,
13117 to_intel_crtc_state(crtc->state),
13118 to_intel_plane_state(plane->state));
13120 trace_intel_disable_plane(plane, to_intel_crtc(crtc));
13121 intel_plane->disable_plane(intel_plane, to_intel_crtc(crtc));
13124 old_vma = fetch_and_zero(&to_intel_plane_state(old_plane_state)->vma);
13126 intel_unpin_fb_vma(old_vma);
13129 mutex_unlock(&dev_priv->drm.struct_mutex);
13132 intel_plane_destroy_state(plane, new_plane_state);
13134 intel_plane_destroy_state(plane, old_plane_state);
13138 return drm_atomic_helper_update_plane(plane, crtc, fb,
13139 crtc_x, crtc_y, crtc_w, crtc_h,
13140 src_x, src_y, src_w, src_h, ctx);
13143 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
13144 .update_plane = intel_legacy_cursor_update,
13145 .disable_plane = drm_atomic_helper_disable_plane,
13146 .destroy = intel_plane_destroy,
13147 .atomic_get_property = intel_plane_atomic_get_property,
13148 .atomic_set_property = intel_plane_atomic_set_property,
13149 .atomic_duplicate_state = intel_plane_duplicate_state,
13150 .atomic_destroy_state = intel_plane_destroy_state,
13151 .format_mod_supported = intel_cursor_plane_format_mod_supported,
13154 static struct intel_plane *
13155 intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
13157 struct intel_plane *primary = NULL;
13158 struct intel_plane_state *state = NULL;
13159 const uint32_t *intel_primary_formats;
13160 unsigned int supported_rotations;
13161 unsigned int num_formats;
13162 const uint64_t *modifiers;
13165 primary = kzalloc(sizeof(*primary), GFP_KERNEL);
13171 state = intel_create_plane_state(&primary->base);
13177 primary->base.state = &state->base;
13179 primary->can_scale = false;
13180 primary->max_downscale = 1;
13181 if (INTEL_GEN(dev_priv) >= 9) {
13182 primary->can_scale = true;
13183 state->scaler_id = -1;
13185 primary->pipe = pipe;
13187 * On gen2/3 only plane A can do FBC, but the panel fitter and LVDS
13188 * port is hooked to pipe B. Hence we want plane A feeding pipe B.
13190 if (HAS_FBC(dev_priv) && INTEL_GEN(dev_priv) < 4)
13191 primary->plane = (enum plane) !pipe;
13193 primary->plane = (enum plane) pipe;
13194 primary->id = PLANE_PRIMARY;
13195 primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
13196 primary->check_plane = intel_check_primary_plane;
13198 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
13199 intel_primary_formats = skl_primary_formats;
13200 num_formats = ARRAY_SIZE(skl_primary_formats);
13201 modifiers = skl_format_modifiers_ccs;
13203 primary->update_plane = skl_update_plane;
13204 primary->disable_plane = skl_disable_plane;
13205 } else if (INTEL_GEN(dev_priv) >= 9) {
13206 intel_primary_formats = skl_primary_formats;
13207 num_formats = ARRAY_SIZE(skl_primary_formats);
13209 modifiers = skl_format_modifiers_ccs;
13211 modifiers = skl_format_modifiers_noccs;
13213 primary->update_plane = skl_update_plane;
13214 primary->disable_plane = skl_disable_plane;
13215 } else if (INTEL_GEN(dev_priv) >= 4) {
13216 intel_primary_formats = i965_primary_formats;
13217 num_formats = ARRAY_SIZE(i965_primary_formats);
13218 modifiers = i9xx_format_modifiers;
13220 primary->update_plane = i9xx_update_primary_plane;
13221 primary->disable_plane = i9xx_disable_primary_plane;
13223 intel_primary_formats = i8xx_primary_formats;
13224 num_formats = ARRAY_SIZE(i8xx_primary_formats);
13225 modifiers = i9xx_format_modifiers;
13227 primary->update_plane = i9xx_update_primary_plane;
13228 primary->disable_plane = i9xx_disable_primary_plane;
13231 if (INTEL_GEN(dev_priv) >= 9)
13232 ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
13233 0, &intel_plane_funcs,
13234 intel_primary_formats, num_formats,
13236 DRM_PLANE_TYPE_PRIMARY,
13237 "plane 1%c", pipe_name(pipe));
13238 else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
13239 ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
13240 0, &intel_plane_funcs,
13241 intel_primary_formats, num_formats,
13243 DRM_PLANE_TYPE_PRIMARY,
13244 "primary %c", pipe_name(pipe));
13246 ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
13247 0, &intel_plane_funcs,
13248 intel_primary_formats, num_formats,
13250 DRM_PLANE_TYPE_PRIMARY,
13251 "plane %c", plane_name(primary->plane));
13255 if (INTEL_GEN(dev_priv) >= 9) {
13256 supported_rotations =
13257 DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 |
13258 DRM_MODE_ROTATE_180 | DRM_MODE_ROTATE_270;
13259 } else if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) {
13260 supported_rotations =
13261 DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
13262 DRM_MODE_REFLECT_X;
13263 } else if (INTEL_GEN(dev_priv) >= 4) {
13264 supported_rotations =
13265 DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180;
13267 supported_rotations = DRM_MODE_ROTATE_0;
13270 if (INTEL_GEN(dev_priv) >= 4)
13271 drm_plane_create_rotation_property(&primary->base,
13273 supported_rotations);
13275 drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
13283 return ERR_PTR(ret);
13286 static struct intel_plane *
13287 intel_cursor_plane_create(struct drm_i915_private *dev_priv,
13290 struct intel_plane *cursor = NULL;
13291 struct intel_plane_state *state = NULL;
13294 cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
13300 state = intel_create_plane_state(&cursor->base);
13306 cursor->base.state = &state->base;
13308 cursor->can_scale = false;
13309 cursor->max_downscale = 1;
13310 cursor->pipe = pipe;
13311 cursor->plane = pipe;
13312 cursor->id = PLANE_CURSOR;
13313 cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
13315 if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) {
13316 cursor->update_plane = i845_update_cursor;
13317 cursor->disable_plane = i845_disable_cursor;
13318 cursor->check_plane = i845_check_cursor;
13320 cursor->update_plane = i9xx_update_cursor;
13321 cursor->disable_plane = i9xx_disable_cursor;
13322 cursor->check_plane = i9xx_check_cursor;
13325 cursor->cursor.base = ~0;
13326 cursor->cursor.cntl = ~0;
13328 if (IS_I845G(dev_priv) || IS_I865G(dev_priv) || HAS_CUR_FBC(dev_priv))
13329 cursor->cursor.size = ~0;
13331 ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
13332 0, &intel_cursor_plane_funcs,
13333 intel_cursor_formats,
13334 ARRAY_SIZE(intel_cursor_formats),
13335 cursor_format_modifiers,
13336 DRM_PLANE_TYPE_CURSOR,
13337 "cursor %c", pipe_name(pipe));
13341 if (INTEL_GEN(dev_priv) >= 4)
13342 drm_plane_create_rotation_property(&cursor->base,
13344 DRM_MODE_ROTATE_0 |
13345 DRM_MODE_ROTATE_180);
13347 if (INTEL_GEN(dev_priv) >= 9)
13348 state->scaler_id = -1;
13350 drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
13358 return ERR_PTR(ret);
13361 static void intel_crtc_init_scalers(struct intel_crtc *crtc,
13362 struct intel_crtc_state *crtc_state)
13364 struct intel_crtc_scaler_state *scaler_state =
13365 &crtc_state->scaler_state;
13366 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
13369 crtc->num_scalers = dev_priv->info.num_scalers[crtc->pipe];
13370 if (!crtc->num_scalers)
13373 for (i = 0; i < crtc->num_scalers; i++) {
13374 struct intel_scaler *scaler = &scaler_state->scalers[i];
13376 scaler->in_use = 0;
13377 scaler->mode = PS_SCALER_MODE_DYN;
13380 scaler_state->scaler_id = -1;
13383 static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
13385 struct intel_crtc *intel_crtc;
13386 struct intel_crtc_state *crtc_state = NULL;
13387 struct intel_plane *primary = NULL;
13388 struct intel_plane *cursor = NULL;
13391 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
13395 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
13400 intel_crtc->config = crtc_state;
13401 intel_crtc->base.state = &crtc_state->base;
13402 crtc_state->base.crtc = &intel_crtc->base;
13404 primary = intel_primary_plane_create(dev_priv, pipe);
13405 if (IS_ERR(primary)) {
13406 ret = PTR_ERR(primary);
13409 intel_crtc->plane_ids_mask |= BIT(primary->id);
13411 for_each_sprite(dev_priv, pipe, sprite) {
13412 struct intel_plane *plane;
13414 plane = intel_sprite_plane_create(dev_priv, pipe, sprite);
13415 if (IS_ERR(plane)) {
13416 ret = PTR_ERR(plane);
13419 intel_crtc->plane_ids_mask |= BIT(plane->id);
13422 cursor = intel_cursor_plane_create(dev_priv, pipe);
13423 if (IS_ERR(cursor)) {
13424 ret = PTR_ERR(cursor);
13427 intel_crtc->plane_ids_mask |= BIT(cursor->id);
13429 ret = drm_crtc_init_with_planes(&dev_priv->drm, &intel_crtc->base,
13430 &primary->base, &cursor->base,
13432 "pipe %c", pipe_name(pipe));
13436 intel_crtc->pipe = pipe;
13437 intel_crtc->plane = primary->plane;
13439 /* initialize shared scalers */
13440 intel_crtc_init_scalers(intel_crtc, crtc_state);
13442 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
13443 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
13444 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = intel_crtc;
13445 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = intel_crtc;
13447 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
13449 intel_color_init(&intel_crtc->base);
13451 WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
13457 * drm_mode_config_cleanup() will free up any
13458 * crtcs/planes already initialized.
13466 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
13468 struct drm_device *dev = connector->base.dev;
13470 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
13472 if (!connector->base.state->crtc)
13473 return INVALID_PIPE;
13475 return to_intel_crtc(connector->base.state->crtc)->pipe;
13478 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
13479 struct drm_file *file)
13481 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
13482 struct drm_crtc *drmmode_crtc;
13483 struct intel_crtc *crtc;
13485 drmmode_crtc = drm_crtc_find(dev, file, pipe_from_crtc_id->crtc_id);
13489 crtc = to_intel_crtc(drmmode_crtc);
13490 pipe_from_crtc_id->pipe = crtc->pipe;
13495 static int intel_encoder_clones(struct intel_encoder *encoder)
13497 struct drm_device *dev = encoder->base.dev;
13498 struct intel_encoder *source_encoder;
13499 int index_mask = 0;
13502 for_each_intel_encoder(dev, source_encoder) {
13503 if (encoders_cloneable(encoder, source_encoder))
13504 index_mask |= (1 << entry);
13512 static bool has_edp_a(struct drm_i915_private *dev_priv)
13514 if (!IS_MOBILE(dev_priv))
13517 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
13520 if (IS_GEN5(dev_priv) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
13526 static bool intel_crt_present(struct drm_i915_private *dev_priv)
13528 if (INTEL_GEN(dev_priv) >= 9)
13531 if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv))
13534 if (IS_CHERRYVIEW(dev_priv))
13537 if (HAS_PCH_LPT_H(dev_priv) &&
13538 I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
13541 /* DDI E can't be used if DDI A requires 4 lanes */
13542 if (HAS_DDI(dev_priv) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
13545 if (!dev_priv->vbt.int_crt_support)
13551 void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv)
13556 if (HAS_DDI(dev_priv))
13559 * This w/a is needed at least on CPT/PPT, but to be sure apply it
13560 * everywhere where registers can be write protected.
13562 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
13567 for (pps_idx = 0; pps_idx < pps_num; pps_idx++) {
13568 u32 val = I915_READ(PP_CONTROL(pps_idx));
13570 val = (val & ~PANEL_UNLOCK_MASK) | PANEL_UNLOCK_REGS;
13571 I915_WRITE(PP_CONTROL(pps_idx), val);
13575 static void intel_pps_init(struct drm_i915_private *dev_priv)
13577 if (HAS_PCH_SPLIT(dev_priv) || IS_GEN9_LP(dev_priv))
13578 dev_priv->pps_mmio_base = PCH_PPS_BASE;
13579 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
13580 dev_priv->pps_mmio_base = VLV_PPS_BASE;
13582 dev_priv->pps_mmio_base = PPS_BASE;
13584 intel_pps_unlock_regs_wa(dev_priv);
13587 static void intel_setup_outputs(struct drm_i915_private *dev_priv)
13589 struct intel_encoder *encoder;
13590 bool dpd_is_edp = false;
13592 intel_pps_init(dev_priv);
13595 * intel_edp_init_connector() depends on this completing first, to
13596 * prevent the registeration of both eDP and LVDS and the incorrect
13597 * sharing of the PPS.
13599 intel_lvds_init(dev_priv);
13601 if (intel_crt_present(dev_priv))
13602 intel_crt_init(dev_priv);
13604 if (IS_GEN9_LP(dev_priv)) {
13606 * FIXME: Broxton doesn't support port detection via the
13607 * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
13608 * detect the ports.
13610 intel_ddi_init(dev_priv, PORT_A);
13611 intel_ddi_init(dev_priv, PORT_B);
13612 intel_ddi_init(dev_priv, PORT_C);
13614 intel_dsi_init(dev_priv);
13615 } else if (HAS_DDI(dev_priv)) {
13619 * Haswell uses DDI functions to detect digital outputs.
13620 * On SKL pre-D0 the strap isn't connected, so we assume
13623 found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
13624 /* WaIgnoreDDIAStrap: skl */
13625 if (found || IS_GEN9_BC(dev_priv))
13626 intel_ddi_init(dev_priv, PORT_A);
13628 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
13630 found = I915_READ(SFUSE_STRAP);
13632 if (found & SFUSE_STRAP_DDIB_DETECTED)
13633 intel_ddi_init(dev_priv, PORT_B);
13634 if (found & SFUSE_STRAP_DDIC_DETECTED)
13635 intel_ddi_init(dev_priv, PORT_C);
13636 if (found & SFUSE_STRAP_DDID_DETECTED)
13637 intel_ddi_init(dev_priv, PORT_D);
13639 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
13641 if (IS_GEN9_BC(dev_priv) &&
13642 (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
13643 dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
13644 dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
13645 intel_ddi_init(dev_priv, PORT_E);
13647 } else if (HAS_PCH_SPLIT(dev_priv)) {
13649 dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D);
13651 if (has_edp_a(dev_priv))
13652 intel_dp_init(dev_priv, DP_A, PORT_A);
13654 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
13655 /* PCH SDVOB multiplex with HDMIB */
13656 found = intel_sdvo_init(dev_priv, PCH_SDVOB, PORT_B);
13658 intel_hdmi_init(dev_priv, PCH_HDMIB, PORT_B);
13659 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
13660 intel_dp_init(dev_priv, PCH_DP_B, PORT_B);
13663 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
13664 intel_hdmi_init(dev_priv, PCH_HDMIC, PORT_C);
13666 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
13667 intel_hdmi_init(dev_priv, PCH_HDMID, PORT_D);
13669 if (I915_READ(PCH_DP_C) & DP_DETECTED)
13670 intel_dp_init(dev_priv, PCH_DP_C, PORT_C);
13672 if (I915_READ(PCH_DP_D) & DP_DETECTED)
13673 intel_dp_init(dev_priv, PCH_DP_D, PORT_D);
13674 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
13675 bool has_edp, has_port;
13678 * The DP_DETECTED bit is the latched state of the DDC
13679 * SDA pin at boot. However since eDP doesn't require DDC
13680 * (no way to plug in a DP->HDMI dongle) the DDC pins for
13681 * eDP ports may have been muxed to an alternate function.
13682 * Thus we can't rely on the DP_DETECTED bit alone to detect
13683 * eDP ports. Consult the VBT as well as DP_DETECTED to
13684 * detect eDP ports.
13686 * Sadly the straps seem to be missing sometimes even for HDMI
13687 * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap
13688 * and VBT for the presence of the port. Additionally we can't
13689 * trust the port type the VBT declares as we've seen at least
13690 * HDMI ports that the VBT claim are DP or eDP.
13692 has_edp = intel_dp_is_port_edp(dev_priv, PORT_B);
13693 has_port = intel_bios_is_port_present(dev_priv, PORT_B);
13694 if (I915_READ(VLV_DP_B) & DP_DETECTED || has_port)
13695 has_edp &= intel_dp_init(dev_priv, VLV_DP_B, PORT_B);
13696 if ((I915_READ(VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp)
13697 intel_hdmi_init(dev_priv, VLV_HDMIB, PORT_B);
13699 has_edp = intel_dp_is_port_edp(dev_priv, PORT_C);
13700 has_port = intel_bios_is_port_present(dev_priv, PORT_C);
13701 if (I915_READ(VLV_DP_C) & DP_DETECTED || has_port)
13702 has_edp &= intel_dp_init(dev_priv, VLV_DP_C, PORT_C);
13703 if ((I915_READ(VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp)
13704 intel_hdmi_init(dev_priv, VLV_HDMIC, PORT_C);
13706 if (IS_CHERRYVIEW(dev_priv)) {
13708 * eDP not supported on port D,
13709 * so no need to worry about it
13711 has_port = intel_bios_is_port_present(dev_priv, PORT_D);
13712 if (I915_READ(CHV_DP_D) & DP_DETECTED || has_port)
13713 intel_dp_init(dev_priv, CHV_DP_D, PORT_D);
13714 if (I915_READ(CHV_HDMID) & SDVO_DETECTED || has_port)
13715 intel_hdmi_init(dev_priv, CHV_HDMID, PORT_D);
13718 intel_dsi_init(dev_priv);
13719 } else if (!IS_GEN2(dev_priv) && !IS_PINEVIEW(dev_priv)) {
13720 bool found = false;
13722 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
13723 DRM_DEBUG_KMS("probing SDVOB\n");
13724 found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B);
13725 if (!found && IS_G4X(dev_priv)) {
13726 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
13727 intel_hdmi_init(dev_priv, GEN4_HDMIB, PORT_B);
13730 if (!found && IS_G4X(dev_priv))
13731 intel_dp_init(dev_priv, DP_B, PORT_B);
13734 /* Before G4X SDVOC doesn't have its own detect register */
13736 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
13737 DRM_DEBUG_KMS("probing SDVOC\n");
13738 found = intel_sdvo_init(dev_priv, GEN3_SDVOC, PORT_C);
13741 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
13743 if (IS_G4X(dev_priv)) {
13744 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
13745 intel_hdmi_init(dev_priv, GEN4_HDMIC, PORT_C);
13747 if (IS_G4X(dev_priv))
13748 intel_dp_init(dev_priv, DP_C, PORT_C);
13751 if (IS_G4X(dev_priv) && (I915_READ(DP_D) & DP_DETECTED))
13752 intel_dp_init(dev_priv, DP_D, PORT_D);
13753 } else if (IS_GEN2(dev_priv))
13754 intel_dvo_init(dev_priv);
13756 if (SUPPORTS_TV(dev_priv))
13757 intel_tv_init(dev_priv);
13759 intel_psr_init(dev_priv);
13761 for_each_intel_encoder(&dev_priv->drm, encoder) {
13762 encoder->base.possible_crtcs = encoder->crtc_mask;
13763 encoder->base.possible_clones =
13764 intel_encoder_clones(encoder);
13767 intel_init_pch_refclk(dev_priv);
13769 drm_helper_move_panel_connectors_to_head(&dev_priv->drm);
13772 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
13774 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
13776 drm_framebuffer_cleanup(fb);
13778 i915_gem_object_lock(intel_fb->obj);
13779 WARN_ON(!intel_fb->obj->framebuffer_references--);
13780 i915_gem_object_unlock(intel_fb->obj);
13782 i915_gem_object_put(intel_fb->obj);
13787 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
13788 struct drm_file *file,
13789 unsigned int *handle)
13791 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
13792 struct drm_i915_gem_object *obj = intel_fb->obj;
13794 if (obj->userptr.mm) {
13795 DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
13799 return drm_gem_handle_create(file, &obj->base, handle);
13802 static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
13803 struct drm_file *file,
13804 unsigned flags, unsigned color,
13805 struct drm_clip_rect *clips,
13806 unsigned num_clips)
13808 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
13810 i915_gem_object_flush_if_display(obj);
13811 intel_fb_obj_flush(obj, ORIGIN_DIRTYFB);
13816 static const struct drm_framebuffer_funcs intel_fb_funcs = {
13817 .destroy = intel_user_framebuffer_destroy,
13818 .create_handle = intel_user_framebuffer_create_handle,
13819 .dirty = intel_user_framebuffer_dirty,
13823 u32 intel_fb_pitch_limit(struct drm_i915_private *dev_priv,
13824 uint64_t fb_modifier, uint32_t pixel_format)
13826 u32 gen = INTEL_GEN(dev_priv);
13829 int cpp = drm_format_plane_cpp(pixel_format, 0);
13831 /* "The stride in bytes must not exceed the of the size of 8K
13832 * pixels and 32K bytes."
13834 return min(8192 * cpp, 32768);
13835 } else if (gen >= 5 && !HAS_GMCH_DISPLAY(dev_priv)) {
13837 } else if (gen >= 4) {
13838 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
13842 } else if (gen >= 3) {
13843 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
13848 /* XXX DSPC is limited to 4k tiled */
13853 static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
13854 struct drm_i915_gem_object *obj,
13855 struct drm_mode_fb_cmd2 *mode_cmd)
13857 struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
13858 struct drm_framebuffer *fb = &intel_fb->base;
13859 struct drm_format_name_buf format_name;
13861 unsigned int tiling, stride;
13865 i915_gem_object_lock(obj);
13866 obj->framebuffer_references++;
13867 tiling = i915_gem_object_get_tiling(obj);
13868 stride = i915_gem_object_get_stride(obj);
13869 i915_gem_object_unlock(obj);
13871 if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
13873 * If there's a fence, enforce that
13874 * the fb modifier and tiling mode match.
13876 if (tiling != I915_TILING_NONE &&
13877 tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
13878 DRM_DEBUG_KMS("tiling_mode doesn't match fb modifier\n");
13882 if (tiling == I915_TILING_X) {
13883 mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
13884 } else if (tiling == I915_TILING_Y) {
13885 DRM_DEBUG_KMS("No Y tiling for legacy addfb\n");
13890 /* Passed in modifier sanity checking. */
13891 switch (mode_cmd->modifier[0]) {
13892 case I915_FORMAT_MOD_Y_TILED_CCS:
13893 case I915_FORMAT_MOD_Yf_TILED_CCS:
13894 switch (mode_cmd->pixel_format) {
13895 case DRM_FORMAT_XBGR8888:
13896 case DRM_FORMAT_ABGR8888:
13897 case DRM_FORMAT_XRGB8888:
13898 case DRM_FORMAT_ARGB8888:
13901 DRM_DEBUG_KMS("RC supported only with RGB8888 formats\n");
13905 case I915_FORMAT_MOD_Y_TILED:
13906 case I915_FORMAT_MOD_Yf_TILED:
13907 if (INTEL_GEN(dev_priv) < 9) {
13908 DRM_DEBUG_KMS("Unsupported tiling 0x%llx!\n",
13909 mode_cmd->modifier[0]);
13912 case DRM_FORMAT_MOD_LINEAR:
13913 case I915_FORMAT_MOD_X_TILED:
13916 DRM_DEBUG_KMS("Unsupported fb modifier 0x%llx!\n",
13917 mode_cmd->modifier[0]);
13922 * gen2/3 display engine uses the fence if present,
13923 * so the tiling mode must match the fb modifier exactly.
13925 if (INTEL_INFO(dev_priv)->gen < 4 &&
13926 tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
13927 DRM_DEBUG_KMS("tiling_mode must match fb modifier exactly on gen2/3\n");
13931 pitch_limit = intel_fb_pitch_limit(dev_priv, mode_cmd->modifier[0],
13932 mode_cmd->pixel_format);
13933 if (mode_cmd->pitches[0] > pitch_limit) {
13934 DRM_DEBUG_KMS("%s pitch (%u) must be at most %d\n",
13935 mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR ?
13936 "tiled" : "linear",
13937 mode_cmd->pitches[0], pitch_limit);
13942 * If there's a fence, enforce that
13943 * the fb pitch and fence stride match.
13945 if (tiling != I915_TILING_NONE && mode_cmd->pitches[0] != stride) {
13946 DRM_DEBUG_KMS("pitch (%d) must match tiling stride (%d)\n",
13947 mode_cmd->pitches[0], stride);
13951 /* Reject formats not supported by any plane early. */
13952 switch (mode_cmd->pixel_format) {
13953 case DRM_FORMAT_C8:
13954 case DRM_FORMAT_RGB565:
13955 case DRM_FORMAT_XRGB8888:
13956 case DRM_FORMAT_ARGB8888:
13958 case DRM_FORMAT_XRGB1555:
13959 if (INTEL_GEN(dev_priv) > 3) {
13960 DRM_DEBUG_KMS("unsupported pixel format: %s\n",
13961 drm_get_format_name(mode_cmd->pixel_format, &format_name));
13965 case DRM_FORMAT_ABGR8888:
13966 if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
13967 INTEL_GEN(dev_priv) < 9) {
13968 DRM_DEBUG_KMS("unsupported pixel format: %s\n",
13969 drm_get_format_name(mode_cmd->pixel_format, &format_name));
13973 case DRM_FORMAT_XBGR8888:
13974 case DRM_FORMAT_XRGB2101010:
13975 case DRM_FORMAT_XBGR2101010:
13976 if (INTEL_GEN(dev_priv) < 4) {
13977 DRM_DEBUG_KMS("unsupported pixel format: %s\n",
13978 drm_get_format_name(mode_cmd->pixel_format, &format_name));
13982 case DRM_FORMAT_ABGR2101010:
13983 if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
13984 DRM_DEBUG_KMS("unsupported pixel format: %s\n",
13985 drm_get_format_name(mode_cmd->pixel_format, &format_name));
13989 case DRM_FORMAT_YUYV:
13990 case DRM_FORMAT_UYVY:
13991 case DRM_FORMAT_YVYU:
13992 case DRM_FORMAT_VYUY:
13993 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv)) {
13994 DRM_DEBUG_KMS("unsupported pixel format: %s\n",
13995 drm_get_format_name(mode_cmd->pixel_format, &format_name));
14000 DRM_DEBUG_KMS("unsupported pixel format: %s\n",
14001 drm_get_format_name(mode_cmd->pixel_format, &format_name));
14005 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
14006 if (mode_cmd->offsets[0] != 0)
14009 drm_helper_mode_fill_fb_struct(&dev_priv->drm, fb, mode_cmd);
14011 for (i = 0; i < fb->format->num_planes; i++) {
14012 u32 stride_alignment;
14014 if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
14015 DRM_DEBUG_KMS("bad plane %d handle\n", i);
14019 stride_alignment = intel_fb_stride_alignment(fb, i);
14022 * Display WA #0531: skl,bxt,kbl,glk
14024 * Render decompression and plane width > 3840
14025 * combined with horizontal panning requires the
14026 * plane stride to be a multiple of 4. We'll just
14027 * require the entire fb to accommodate that to avoid
14028 * potential runtime errors at plane configuration time.
14030 if (IS_GEN9(dev_priv) && i == 0 && fb->width > 3840 &&
14031 (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
14032 fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS))
14033 stride_alignment *= 4;
14035 if (fb->pitches[i] & (stride_alignment - 1)) {
14036 DRM_DEBUG_KMS("plane %d pitch (%d) must be at least %u byte aligned\n",
14037 i, fb->pitches[i], stride_alignment);
14042 intel_fb->obj = obj;
14044 ret = intel_fill_fb_info(dev_priv, fb);
14048 ret = drm_framebuffer_init(&dev_priv->drm, fb, &intel_fb_funcs);
14050 DRM_ERROR("framebuffer init failed %d\n", ret);
14057 i915_gem_object_lock(obj);
14058 obj->framebuffer_references--;
14059 i915_gem_object_unlock(obj);
14063 static struct drm_framebuffer *
14064 intel_user_framebuffer_create(struct drm_device *dev,
14065 struct drm_file *filp,
14066 const struct drm_mode_fb_cmd2 *user_mode_cmd)
14068 struct drm_framebuffer *fb;
14069 struct drm_i915_gem_object *obj;
14070 struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
14072 obj = i915_gem_object_lookup(filp, mode_cmd.handles[0]);
14074 return ERR_PTR(-ENOENT);
14076 fb = intel_framebuffer_create(obj, &mode_cmd);
14078 i915_gem_object_put(obj);
14083 static void intel_atomic_state_free(struct drm_atomic_state *state)
14085 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
14087 drm_atomic_state_default_release(state);
14089 i915_sw_fence_fini(&intel_state->commit_ready);
14094 static const struct drm_mode_config_funcs intel_mode_funcs = {
14095 .fb_create = intel_user_framebuffer_create,
14096 .get_format_info = intel_get_format_info,
14097 .output_poll_changed = intel_fbdev_output_poll_changed,
14098 .atomic_check = intel_atomic_check,
14099 .atomic_commit = intel_atomic_commit,
14100 .atomic_state_alloc = intel_atomic_state_alloc,
14101 .atomic_state_clear = intel_atomic_state_clear,
14102 .atomic_state_free = intel_atomic_state_free,
14106 * intel_init_display_hooks - initialize the display modesetting hooks
14107 * @dev_priv: device private
14109 void intel_init_display_hooks(struct drm_i915_private *dev_priv)
14111 intel_init_cdclk_hooks(dev_priv);
14113 if (INTEL_INFO(dev_priv)->gen >= 9) {
14114 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14115 dev_priv->display.get_initial_plane_config =
14116 skylake_get_initial_plane_config;
14117 dev_priv->display.crtc_compute_clock =
14118 haswell_crtc_compute_clock;
14119 dev_priv->display.crtc_enable = haswell_crtc_enable;
14120 dev_priv->display.crtc_disable = haswell_crtc_disable;
14121 } else if (HAS_DDI(dev_priv)) {
14122 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14123 dev_priv->display.get_initial_plane_config =
14124 ironlake_get_initial_plane_config;
14125 dev_priv->display.crtc_compute_clock =
14126 haswell_crtc_compute_clock;
14127 dev_priv->display.crtc_enable = haswell_crtc_enable;
14128 dev_priv->display.crtc_disable = haswell_crtc_disable;
14129 } else if (HAS_PCH_SPLIT(dev_priv)) {
14130 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
14131 dev_priv->display.get_initial_plane_config =
14132 ironlake_get_initial_plane_config;
14133 dev_priv->display.crtc_compute_clock =
14134 ironlake_crtc_compute_clock;
14135 dev_priv->display.crtc_enable = ironlake_crtc_enable;
14136 dev_priv->display.crtc_disable = ironlake_crtc_disable;
14137 } else if (IS_CHERRYVIEW(dev_priv)) {
14138 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14139 dev_priv->display.get_initial_plane_config =
14140 i9xx_get_initial_plane_config;
14141 dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
14142 dev_priv->display.crtc_enable = valleyview_crtc_enable;
14143 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14144 } else if (IS_VALLEYVIEW(dev_priv)) {
14145 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14146 dev_priv->display.get_initial_plane_config =
14147 i9xx_get_initial_plane_config;
14148 dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
14149 dev_priv->display.crtc_enable = valleyview_crtc_enable;
14150 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14151 } else if (IS_G4X(dev_priv)) {
14152 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14153 dev_priv->display.get_initial_plane_config =
14154 i9xx_get_initial_plane_config;
14155 dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
14156 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14157 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14158 } else if (IS_PINEVIEW(dev_priv)) {
14159 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14160 dev_priv->display.get_initial_plane_config =
14161 i9xx_get_initial_plane_config;
14162 dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
14163 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14164 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14165 } else if (!IS_GEN2(dev_priv)) {
14166 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14167 dev_priv->display.get_initial_plane_config =
14168 i9xx_get_initial_plane_config;
14169 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
14170 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14171 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14173 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14174 dev_priv->display.get_initial_plane_config =
14175 i9xx_get_initial_plane_config;
14176 dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
14177 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14178 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14181 if (IS_GEN5(dev_priv)) {
14182 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
14183 } else if (IS_GEN6(dev_priv)) {
14184 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
14185 } else if (IS_IVYBRIDGE(dev_priv)) {
14186 /* FIXME: detect B0+ stepping and use auto training */
14187 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
14188 } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
14189 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
14192 if (INTEL_GEN(dev_priv) >= 9)
14193 dev_priv->display.update_crtcs = skl_update_crtcs;
14195 dev_priv->display.update_crtcs = intel_update_crtcs;
14199 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
14201 static void quirk_ssc_force_disable(struct drm_device *dev)
14203 struct drm_i915_private *dev_priv = to_i915(dev);
14204 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
14205 DRM_INFO("applying lvds SSC disable quirk\n");
14209 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
14212 static void quirk_invert_brightness(struct drm_device *dev)
14214 struct drm_i915_private *dev_priv = to_i915(dev);
14215 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
14216 DRM_INFO("applying inverted panel brightness quirk\n");
14219 /* Some VBT's incorrectly indicate no backlight is present */
14220 static void quirk_backlight_present(struct drm_device *dev)
14222 struct drm_i915_private *dev_priv = to_i915(dev);
14223 dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
14224 DRM_INFO("applying backlight present quirk\n");
14227 /* Toshiba Satellite P50-C-18C requires T12 delay to be min 800ms
14228 * which is 300 ms greater than eDP spec T12 min.
14230 static void quirk_increase_t12_delay(struct drm_device *dev)
14232 struct drm_i915_private *dev_priv = to_i915(dev);
14234 dev_priv->quirks |= QUIRK_INCREASE_T12_DELAY;
14235 DRM_INFO("Applying T12 delay quirk\n");
14238 struct intel_quirk {
14240 int subsystem_vendor;
14241 int subsystem_device;
14242 void (*hook)(struct drm_device *dev);
14245 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
14246 struct intel_dmi_quirk {
14247 void (*hook)(struct drm_device *dev);
14248 const struct dmi_system_id (*dmi_id_list)[];
14251 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
14253 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
14257 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
14259 .dmi_id_list = &(const struct dmi_system_id[]) {
14261 .callback = intel_dmi_reverse_brightness,
14262 .ident = "NCR Corporation",
14263 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
14264 DMI_MATCH(DMI_PRODUCT_NAME, ""),
14267 { } /* terminating entry */
14269 .hook = quirk_invert_brightness,
14273 static struct intel_quirk intel_quirks[] = {
14274 /* Lenovo U160 cannot use SSC on LVDS */
14275 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
14277 /* Sony Vaio Y cannot use SSC on LVDS */
14278 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
14280 /* Acer Aspire 5734Z must invert backlight brightness */
14281 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
14283 /* Acer/eMachines G725 */
14284 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
14286 /* Acer/eMachines e725 */
14287 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
14289 /* Acer/Packard Bell NCL20 */
14290 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
14292 /* Acer Aspire 4736Z */
14293 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
14295 /* Acer Aspire 5336 */
14296 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
14298 /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
14299 { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
14301 /* Acer C720 Chromebook (Core i3 4005U) */
14302 { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
14304 /* Apple Macbook 2,1 (Core 2 T7400) */
14305 { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
14307 /* Apple Macbook 4,1 */
14308 { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
14310 /* Toshiba CB35 Chromebook (Celeron 2955U) */
14311 { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
14313 /* HP Chromebook 14 (Celeron 2955U) */
14314 { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
14316 /* Dell Chromebook 11 */
14317 { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
14319 /* Dell Chromebook 11 (2015 version) */
14320 { 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
14322 /* Toshiba Satellite P50-C-18C */
14323 { 0x191B, 0x1179, 0xF840, quirk_increase_t12_delay },
14326 static void intel_init_quirks(struct drm_device *dev)
14328 struct pci_dev *d = dev->pdev;
14331 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
14332 struct intel_quirk *q = &intel_quirks[i];
14334 if (d->device == q->device &&
14335 (d->subsystem_vendor == q->subsystem_vendor ||
14336 q->subsystem_vendor == PCI_ANY_ID) &&
14337 (d->subsystem_device == q->subsystem_device ||
14338 q->subsystem_device == PCI_ANY_ID))
14341 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
14342 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
14343 intel_dmi_quirks[i].hook(dev);
14347 /* Disable the VGA plane that we never use */
14348 static void i915_disable_vga(struct drm_i915_private *dev_priv)
14350 struct pci_dev *pdev = dev_priv->drm.pdev;
14352 i915_reg_t vga_reg = i915_vgacntrl_reg(dev_priv);
14354 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
14355 vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
14356 outb(SR01, VGA_SR_INDEX);
14357 sr1 = inb(VGA_SR_DATA);
14358 outb(sr1 | 1<<5, VGA_SR_DATA);
14359 vga_put(pdev, VGA_RSRC_LEGACY_IO);
14362 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
14363 POSTING_READ(vga_reg);
14366 void intel_modeset_init_hw(struct drm_device *dev)
14368 struct drm_i915_private *dev_priv = to_i915(dev);
14370 intel_update_cdclk(dev_priv);
14371 dev_priv->cdclk.logical = dev_priv->cdclk.actual = dev_priv->cdclk.hw;
14375 * Calculate what we think the watermarks should be for the state we've read
14376 * out of the hardware and then immediately program those watermarks so that
14377 * we ensure the hardware settings match our internal state.
14379 * We can calculate what we think WM's should be by creating a duplicate of the
14380 * current state (which was constructed during hardware readout) and running it
14381 * through the atomic check code to calculate new watermark values in the
14384 static void sanitize_watermarks(struct drm_device *dev)
14386 struct drm_i915_private *dev_priv = to_i915(dev);
14387 struct drm_atomic_state *state;
14388 struct intel_atomic_state *intel_state;
14389 struct drm_crtc *crtc;
14390 struct drm_crtc_state *cstate;
14391 struct drm_modeset_acquire_ctx ctx;
14395 /* Only supported on platforms that use atomic watermark design */
14396 if (!dev_priv->display.optimize_watermarks)
14400 * We need to hold connection_mutex before calling duplicate_state so
14401 * that the connector loop is protected.
14403 drm_modeset_acquire_init(&ctx, 0);
14405 ret = drm_modeset_lock_all_ctx(dev, &ctx);
14406 if (ret == -EDEADLK) {
14407 drm_modeset_backoff(&ctx);
14409 } else if (WARN_ON(ret)) {
14413 state = drm_atomic_helper_duplicate_state(dev, &ctx);
14414 if (WARN_ON(IS_ERR(state)))
14417 intel_state = to_intel_atomic_state(state);
14420 * Hardware readout is the only time we don't want to calculate
14421 * intermediate watermarks (since we don't trust the current
14424 if (!HAS_GMCH_DISPLAY(dev_priv))
14425 intel_state->skip_intermediate_wm = true;
14427 ret = intel_atomic_check(dev, state);
14430 * If we fail here, it means that the hardware appears to be
14431 * programmed in a way that shouldn't be possible, given our
14432 * understanding of watermark requirements. This might mean a
14433 * mistake in the hardware readout code or a mistake in the
14434 * watermark calculations for a given platform. Raise a WARN
14435 * so that this is noticeable.
14437 * If this actually happens, we'll have to just leave the
14438 * BIOS-programmed watermarks untouched and hope for the best.
14440 WARN(true, "Could not determine valid watermarks for inherited state\n");
14444 /* Write calculated watermark values back */
14445 for_each_new_crtc_in_state(state, crtc, cstate, i) {
14446 struct intel_crtc_state *cs = to_intel_crtc_state(cstate);
14448 cs->wm.need_postvbl_update = true;
14449 dev_priv->display.optimize_watermarks(intel_state, cs);
14453 drm_atomic_state_put(state);
14455 drm_modeset_drop_locks(&ctx);
14456 drm_modeset_acquire_fini(&ctx);
14459 int intel_modeset_init(struct drm_device *dev)
14461 struct drm_i915_private *dev_priv = to_i915(dev);
14462 struct i915_ggtt *ggtt = &dev_priv->ggtt;
14464 struct intel_crtc *crtc;
14466 drm_mode_config_init(dev);
14468 dev->mode_config.min_width = 0;
14469 dev->mode_config.min_height = 0;
14471 dev->mode_config.preferred_depth = 24;
14472 dev->mode_config.prefer_shadow = 1;
14474 dev->mode_config.allow_fb_modifiers = true;
14476 dev->mode_config.funcs = &intel_mode_funcs;
14478 init_llist_head(&dev_priv->atomic_helper.free_list);
14479 INIT_WORK(&dev_priv->atomic_helper.free_work,
14480 intel_atomic_helper_free_state_worker);
14482 intel_init_quirks(dev);
14484 intel_init_pm(dev_priv);
14486 if (INTEL_INFO(dev_priv)->num_pipes == 0)
14490 * There may be no VBT; and if the BIOS enabled SSC we can
14491 * just keep using it to avoid unnecessary flicker. Whereas if the
14492 * BIOS isn't using it, don't assume it will work even if the VBT
14493 * indicates as much.
14495 if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) {
14496 bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
14499 if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
14500 DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
14501 bios_lvds_use_ssc ? "en" : "dis",
14502 dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
14503 dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
14507 if (IS_GEN2(dev_priv)) {
14508 dev->mode_config.max_width = 2048;
14509 dev->mode_config.max_height = 2048;
14510 } else if (IS_GEN3(dev_priv)) {
14511 dev->mode_config.max_width = 4096;
14512 dev->mode_config.max_height = 4096;
14514 dev->mode_config.max_width = 8192;
14515 dev->mode_config.max_height = 8192;
14518 if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) {
14519 dev->mode_config.cursor_width = IS_I845G(dev_priv) ? 64 : 512;
14520 dev->mode_config.cursor_height = 1023;
14521 } else if (IS_GEN2(dev_priv)) {
14522 dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
14523 dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
14525 dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
14526 dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
14529 dev->mode_config.fb_base = ggtt->mappable_base;
14531 DRM_DEBUG_KMS("%d display pipe%s available.\n",
14532 INTEL_INFO(dev_priv)->num_pipes,
14533 INTEL_INFO(dev_priv)->num_pipes > 1 ? "s" : "");
14535 for_each_pipe(dev_priv, pipe) {
14538 ret = intel_crtc_init(dev_priv, pipe);
14540 drm_mode_config_cleanup(dev);
14545 intel_shared_dpll_init(dev);
14547 intel_update_czclk(dev_priv);
14548 intel_modeset_init_hw(dev);
14550 if (dev_priv->max_cdclk_freq == 0)
14551 intel_update_max_cdclk(dev_priv);
14553 /* Just disable it once at startup */
14554 i915_disable_vga(dev_priv);
14555 intel_setup_outputs(dev_priv);
14557 drm_modeset_lock_all(dev);
14558 intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx);
14559 drm_modeset_unlock_all(dev);
14561 for_each_intel_crtc(dev, crtc) {
14562 struct intel_initial_plane_config plane_config = {};
14568 * Note that reserving the BIOS fb up front prevents us
14569 * from stuffing other stolen allocations like the ring
14570 * on top. This prevents some ugliness at boot time, and
14571 * can even allow for smooth boot transitions if the BIOS
14572 * fb is large enough for the active pipe configuration.
14574 dev_priv->display.get_initial_plane_config(crtc,
14578 * If the fb is shared between multiple heads, we'll
14579 * just get the first one.
14581 intel_find_initial_plane_obj(crtc, &plane_config);
14585 * Make sure hardware watermarks really match the state we read out.
14586 * Note that we need to do this after reconstructing the BIOS fb's
14587 * since the watermark calculation done here will use pstate->fb.
14589 if (!HAS_GMCH_DISPLAY(dev_priv))
14590 sanitize_watermarks(dev);
14595 void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
14597 /* 640x480@60Hz, ~25175 kHz */
14598 struct dpll clock = {
14608 WARN_ON(i9xx_calc_dpll_params(48000, &clock) != 25154);
14610 DRM_DEBUG_KMS("enabling pipe %c due to force quirk (vco=%d dot=%d)\n",
14611 pipe_name(pipe), clock.vco, clock.dot);
14613 fp = i9xx_dpll_compute_fp(&clock);
14614 dpll = (I915_READ(DPLL(pipe)) & DPLL_DVO_2X_MODE) |
14615 DPLL_VGA_MODE_DIS |
14616 ((clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT) |
14617 PLL_P2_DIVIDE_BY_4 |
14618 PLL_REF_INPUT_DREFCLK |
14621 I915_WRITE(FP0(pipe), fp);
14622 I915_WRITE(FP1(pipe), fp);
14624 I915_WRITE(HTOTAL(pipe), (640 - 1) | ((800 - 1) << 16));
14625 I915_WRITE(HBLANK(pipe), (640 - 1) | ((800 - 1) << 16));
14626 I915_WRITE(HSYNC(pipe), (656 - 1) | ((752 - 1) << 16));
14627 I915_WRITE(VTOTAL(pipe), (480 - 1) | ((525 - 1) << 16));
14628 I915_WRITE(VBLANK(pipe), (480 - 1) | ((525 - 1) << 16));
14629 I915_WRITE(VSYNC(pipe), (490 - 1) | ((492 - 1) << 16));
14630 I915_WRITE(PIPESRC(pipe), ((640 - 1) << 16) | (480 - 1));
14633 * Apparently we need to have VGA mode enabled prior to changing
14634 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
14635 * dividers, even though the register value does change.
14637 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS);
14638 I915_WRITE(DPLL(pipe), dpll);
14640 /* Wait for the clocks to stabilize. */
14641 POSTING_READ(DPLL(pipe));
14644 /* The pixel multiplier can only be updated once the
14645 * DPLL is enabled and the clocks are stable.
14647 * So write it again.
14649 I915_WRITE(DPLL(pipe), dpll);
14651 /* We do this three times for luck */
14652 for (i = 0; i < 3 ; i++) {
14653 I915_WRITE(DPLL(pipe), dpll);
14654 POSTING_READ(DPLL(pipe));
14655 udelay(150); /* wait for warmup */
14658 I915_WRITE(PIPECONF(pipe), PIPECONF_ENABLE | PIPECONF_PROGRESSIVE);
14659 POSTING_READ(PIPECONF(pipe));
14662 void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
14664 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
14666 DRM_DEBUG_KMS("disabling pipe %c due to force quirk\n",
14669 assert_plane_disabled(dev_priv, PLANE_A);
14670 assert_plane_disabled(dev_priv, PLANE_B);
14672 I915_WRITE(PIPECONF(pipe), 0);
14673 POSTING_READ(PIPECONF(pipe));
14675 intel_wait_for_pipe_scanline_stopped(crtc);
14677 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
14678 POSTING_READ(DPLL(pipe));
14682 intel_check_plane_mapping(struct intel_crtc *crtc)
14684 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
14687 if (INTEL_INFO(dev_priv)->num_pipes == 1)
14690 val = I915_READ(DSPCNTR(!crtc->plane));
14692 if ((val & DISPLAY_PLANE_ENABLE) &&
14693 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
14699 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
14701 struct drm_device *dev = crtc->base.dev;
14702 struct intel_encoder *encoder;
14704 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
14710 static struct intel_connector *intel_encoder_find_connector(struct intel_encoder *encoder)
14712 struct drm_device *dev = encoder->base.dev;
14713 struct intel_connector *connector;
14715 for_each_connector_on_encoder(dev, &encoder->base, connector)
14721 static bool has_pch_trancoder(struct drm_i915_private *dev_priv,
14722 enum pipe pch_transcoder)
14724 return HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) ||
14725 (HAS_PCH_LPT_H(dev_priv) && pch_transcoder == PIPE_A);
14728 static void intel_sanitize_crtc(struct intel_crtc *crtc,
14729 struct drm_modeset_acquire_ctx *ctx)
14731 struct drm_device *dev = crtc->base.dev;
14732 struct drm_i915_private *dev_priv = to_i915(dev);
14733 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
14735 /* Clear any frame start delays used for debugging left by the BIOS */
14736 if (!transcoder_is_dsi(cpu_transcoder)) {
14737 i915_reg_t reg = PIPECONF(cpu_transcoder);
14740 I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
14743 /* restore vblank interrupts to correct state */
14744 drm_crtc_vblank_reset(&crtc->base);
14745 if (crtc->active) {
14746 struct intel_plane *plane;
14748 drm_crtc_vblank_on(&crtc->base);
14750 /* Disable everything but the primary plane */
14751 for_each_intel_plane_on_crtc(dev, crtc, plane) {
14752 if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
14755 trace_intel_disable_plane(&plane->base, crtc);
14756 plane->disable_plane(plane, crtc);
14760 /* We need to sanitize the plane -> pipe mapping first because this will
14761 * disable the crtc (and hence change the state) if it is wrong. Note
14762 * that gen4+ has a fixed plane -> pipe mapping. */
14763 if (INTEL_GEN(dev_priv) < 4 && !intel_check_plane_mapping(crtc)) {
14766 DRM_DEBUG_KMS("[CRTC:%d:%s] wrong plane connection detected!\n",
14767 crtc->base.base.id, crtc->base.name);
14769 /* Pipe has the wrong plane attached and the plane is active.
14770 * Temporarily change the plane mapping and disable everything
14772 plane = crtc->plane;
14773 crtc->base.primary->state->visible = true;
14774 crtc->plane = !plane;
14775 intel_crtc_disable_noatomic(&crtc->base, ctx);
14776 crtc->plane = plane;
14779 /* Adjust the state of the output pipe according to whether we
14780 * have active connectors/encoders. */
14781 if (crtc->active && !intel_crtc_has_encoders(crtc))
14782 intel_crtc_disable_noatomic(&crtc->base, ctx);
14784 if (crtc->active || HAS_GMCH_DISPLAY(dev_priv)) {
14786 * We start out with underrun reporting disabled to avoid races.
14787 * For correct bookkeeping mark this on active crtcs.
14789 * Also on gmch platforms we dont have any hardware bits to
14790 * disable the underrun reporting. Which means we need to start
14791 * out with underrun reporting disabled also on inactive pipes,
14792 * since otherwise we'll complain about the garbage we read when
14793 * e.g. coming up after runtime pm.
14795 * No protection against concurrent access is required - at
14796 * worst a fifo underrun happens which also sets this to false.
14798 crtc->cpu_fifo_underrun_disabled = true;
14800 * We track the PCH trancoder underrun reporting state
14801 * within the crtc. With crtc for pipe A housing the underrun
14802 * reporting state for PCH transcoder A, crtc for pipe B housing
14803 * it for PCH transcoder B, etc. LPT-H has only PCH transcoder A,
14804 * and marking underrun reporting as disabled for the non-existing
14805 * PCH transcoders B and C would prevent enabling the south
14806 * error interrupt (see cpt_can_enable_serr_int()).
14808 if (has_pch_trancoder(dev_priv, crtc->pipe))
14809 crtc->pch_fifo_underrun_disabled = true;
14813 static void intel_sanitize_encoder(struct intel_encoder *encoder)
14815 struct intel_connector *connector;
14817 /* We need to check both for a crtc link (meaning that the
14818 * encoder is active and trying to read from a pipe) and the
14819 * pipe itself being active. */
14820 bool has_active_crtc = encoder->base.crtc &&
14821 to_intel_crtc(encoder->base.crtc)->active;
14823 connector = intel_encoder_find_connector(encoder);
14824 if (connector && !has_active_crtc) {
14825 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
14826 encoder->base.base.id,
14827 encoder->base.name);
14829 /* Connector is active, but has no active pipe. This is
14830 * fallout from our resume register restoring. Disable
14831 * the encoder manually again. */
14832 if (encoder->base.crtc) {
14833 struct drm_crtc_state *crtc_state = encoder->base.crtc->state;
14835 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
14836 encoder->base.base.id,
14837 encoder->base.name);
14838 encoder->disable(encoder, to_intel_crtc_state(crtc_state), connector->base.state);
14839 if (encoder->post_disable)
14840 encoder->post_disable(encoder, to_intel_crtc_state(crtc_state), connector->base.state);
14842 encoder->base.crtc = NULL;
14844 /* Inconsistent output/port/pipe state happens presumably due to
14845 * a bug in one of the get_hw_state functions. Or someplace else
14846 * in our code, like the register restore mess on resume. Clamp
14847 * things to off as a safer default. */
14849 connector->base.dpms = DRM_MODE_DPMS_OFF;
14850 connector->base.encoder = NULL;
14852 /* Enabled encoders without active connectors will be fixed in
14853 * the crtc fixup. */
14856 void i915_redisable_vga_power_on(struct drm_i915_private *dev_priv)
14858 i915_reg_t vga_reg = i915_vgacntrl_reg(dev_priv);
14860 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
14861 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
14862 i915_disable_vga(dev_priv);
14866 void i915_redisable_vga(struct drm_i915_private *dev_priv)
14868 /* This function can be called both from intel_modeset_setup_hw_state or
14869 * at a very early point in our resume sequence, where the power well
14870 * structures are not yet restored. Since this function is at a very
14871 * paranoid "someone might have enabled VGA while we were not looking"
14872 * level, just check if the power well is enabled instead of trying to
14873 * follow the "don't touch the power well if we don't need it" policy
14874 * the rest of the driver uses. */
14875 if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_VGA))
14878 i915_redisable_vga_power_on(dev_priv);
14880 intel_display_power_put(dev_priv, POWER_DOMAIN_VGA);
14883 static bool primary_get_hw_state(struct intel_plane *plane)
14885 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
14887 return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
14890 /* FIXME read out full plane state for all planes */
14891 static void readout_plane_state(struct intel_crtc *crtc)
14893 struct intel_plane *primary = to_intel_plane(crtc->base.primary);
14896 visible = crtc->active && primary_get_hw_state(primary);
14898 intel_set_plane_visible(to_intel_crtc_state(crtc->base.state),
14899 to_intel_plane_state(primary->base.state),
14903 static void intel_modeset_readout_hw_state(struct drm_device *dev)
14905 struct drm_i915_private *dev_priv = to_i915(dev);
14907 struct intel_crtc *crtc;
14908 struct intel_encoder *encoder;
14909 struct intel_connector *connector;
14910 struct drm_connector_list_iter conn_iter;
14913 dev_priv->active_crtcs = 0;
14915 for_each_intel_crtc(dev, crtc) {
14916 struct intel_crtc_state *crtc_state =
14917 to_intel_crtc_state(crtc->base.state);
14919 __drm_atomic_helper_crtc_destroy_state(&crtc_state->base);
14920 memset(crtc_state, 0, sizeof(*crtc_state));
14921 crtc_state->base.crtc = &crtc->base;
14923 crtc_state->base.active = crtc_state->base.enable =
14924 dev_priv->display.get_pipe_config(crtc, crtc_state);
14926 crtc->base.enabled = crtc_state->base.enable;
14927 crtc->active = crtc_state->base.active;
14929 if (crtc_state->base.active)
14930 dev_priv->active_crtcs |= 1 << crtc->pipe;
14932 readout_plane_state(crtc);
14934 DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
14935 crtc->base.base.id, crtc->base.name,
14936 enableddisabled(crtc_state->base.active));
14939 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
14940 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
14942 pll->on = pll->funcs.get_hw_state(dev_priv, pll,
14943 &pll->state.hw_state);
14944 pll->state.crtc_mask = 0;
14945 for_each_intel_crtc(dev, crtc) {
14946 struct intel_crtc_state *crtc_state =
14947 to_intel_crtc_state(crtc->base.state);
14949 if (crtc_state->base.active &&
14950 crtc_state->shared_dpll == pll)
14951 pll->state.crtc_mask |= 1 << crtc->pipe;
14953 pll->active_mask = pll->state.crtc_mask;
14955 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
14956 pll->name, pll->state.crtc_mask, pll->on);
14959 for_each_intel_encoder(dev, encoder) {
14962 if (encoder->get_hw_state(encoder, &pipe)) {
14963 struct intel_crtc_state *crtc_state;
14965 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
14966 crtc_state = to_intel_crtc_state(crtc->base.state);
14968 encoder->base.crtc = &crtc->base;
14969 crtc_state->output_types |= 1 << encoder->type;
14970 encoder->get_config(encoder, crtc_state);
14972 encoder->base.crtc = NULL;
14975 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
14976 encoder->base.base.id, encoder->base.name,
14977 enableddisabled(encoder->base.crtc),
14981 drm_connector_list_iter_begin(dev, &conn_iter);
14982 for_each_intel_connector_iter(connector, &conn_iter) {
14983 if (connector->get_hw_state(connector)) {
14984 connector->base.dpms = DRM_MODE_DPMS_ON;
14986 encoder = connector->encoder;
14987 connector->base.encoder = &encoder->base;
14989 if (encoder->base.crtc &&
14990 encoder->base.crtc->state->active) {
14992 * This has to be done during hardware readout
14993 * because anything calling .crtc_disable may
14994 * rely on the connector_mask being accurate.
14996 encoder->base.crtc->state->connector_mask |=
14997 1 << drm_connector_index(&connector->base);
14998 encoder->base.crtc->state->encoder_mask |=
14999 1 << drm_encoder_index(&encoder->base);
15003 connector->base.dpms = DRM_MODE_DPMS_OFF;
15004 connector->base.encoder = NULL;
15006 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
15007 connector->base.base.id, connector->base.name,
15008 enableddisabled(connector->base.encoder));
15010 drm_connector_list_iter_end(&conn_iter);
15012 for_each_intel_crtc(dev, crtc) {
15013 struct intel_crtc_state *crtc_state =
15014 to_intel_crtc_state(crtc->base.state);
15017 memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
15018 if (crtc_state->base.active) {
15019 intel_mode_from_pipe_config(&crtc->base.mode, crtc_state);
15020 intel_mode_from_pipe_config(&crtc_state->base.adjusted_mode, crtc_state);
15021 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
15024 * The initial mode needs to be set in order to keep
15025 * the atomic core happy. It wants a valid mode if the
15026 * crtc's enabled, so we do the above call.
15028 * But we don't set all the derived state fully, hence
15029 * set a flag to indicate that a full recalculation is
15030 * needed on the next commit.
15032 crtc_state->base.mode.private_flags = I915_MODE_FLAG_INHERITED;
15034 intel_crtc_compute_pixel_rate(crtc_state);
15036 if (dev_priv->display.modeset_calc_cdclk) {
15037 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
15038 if (WARN_ON(min_cdclk < 0))
15042 drm_calc_timestamping_constants(&crtc->base,
15043 &crtc_state->base.adjusted_mode);
15044 update_scanline_offset(crtc);
15047 dev_priv->min_cdclk[crtc->pipe] = min_cdclk;
15049 intel_pipe_config_sanity_check(dev_priv, crtc_state);
15054 get_encoder_power_domains(struct drm_i915_private *dev_priv)
15056 struct intel_encoder *encoder;
15058 for_each_intel_encoder(&dev_priv->drm, encoder) {
15060 enum intel_display_power_domain domain;
15062 if (!encoder->get_power_domains)
15065 get_domains = encoder->get_power_domains(encoder);
15066 for_each_power_domain(domain, get_domains)
15067 intel_display_power_get(dev_priv, domain);
15071 /* Scan out the current hw modeset state,
15072 * and sanitizes it to the current state
15075 intel_modeset_setup_hw_state(struct drm_device *dev,
15076 struct drm_modeset_acquire_ctx *ctx)
15078 struct drm_i915_private *dev_priv = to_i915(dev);
15080 struct intel_crtc *crtc;
15081 struct intel_encoder *encoder;
15084 if (IS_HASWELL(dev_priv)) {
15086 * WaRsPkgCStateDisplayPMReq:hsw
15087 * System hang if this isn't done before disabling all planes!
15089 I915_WRITE(CHICKEN_PAR1_1,
15090 I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
15093 intel_modeset_readout_hw_state(dev);
15095 /* HW state is read out, now we need to sanitize this mess. */
15096 get_encoder_power_domains(dev_priv);
15098 for_each_intel_encoder(dev, encoder) {
15099 intel_sanitize_encoder(encoder);
15102 for_each_pipe(dev_priv, pipe) {
15103 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
15105 intel_sanitize_crtc(crtc, ctx);
15106 intel_dump_pipe_config(crtc, crtc->config,
15107 "[setup_hw_state]");
15110 intel_modeset_update_connector_atomic_state(dev);
15112 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15113 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15115 if (!pll->on || pll->active_mask)
15118 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
15120 pll->funcs.disable(dev_priv, pll);
15124 if (IS_G4X(dev_priv)) {
15125 g4x_wm_get_hw_state(dev);
15126 g4x_wm_sanitize(dev_priv);
15127 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
15128 vlv_wm_get_hw_state(dev);
15129 vlv_wm_sanitize(dev_priv);
15130 } else if (INTEL_GEN(dev_priv) >= 9) {
15131 skl_wm_get_hw_state(dev);
15132 } else if (HAS_PCH_SPLIT(dev_priv)) {
15133 ilk_wm_get_hw_state(dev);
15136 for_each_intel_crtc(dev, crtc) {
15139 put_domains = modeset_get_crtc_power_domains(&crtc->base, crtc->config);
15140 if (WARN_ON(put_domains))
15141 modeset_put_power_domains(dev_priv, put_domains);
15143 intel_display_set_init_power(dev_priv, false);
15145 intel_power_domains_verify_state(dev_priv);
15147 intel_fbc_init_pipe_state(dev_priv);
15150 void intel_display_resume(struct drm_device *dev)
15152 struct drm_i915_private *dev_priv = to_i915(dev);
15153 struct drm_atomic_state *state = dev_priv->modeset_restore_state;
15154 struct drm_modeset_acquire_ctx ctx;
15157 dev_priv->modeset_restore_state = NULL;
15159 state->acquire_ctx = &ctx;
15161 drm_modeset_acquire_init(&ctx, 0);
15164 ret = drm_modeset_lock_all_ctx(dev, &ctx);
15165 if (ret != -EDEADLK)
15168 drm_modeset_backoff(&ctx);
15172 ret = __intel_display_resume(dev, state, &ctx);
15174 intel_enable_ipc(dev_priv);
15175 drm_modeset_drop_locks(&ctx);
15176 drm_modeset_acquire_fini(&ctx);
15179 DRM_ERROR("Restoring old state failed with %i\n", ret);
15181 drm_atomic_state_put(state);
15184 void intel_modeset_gem_init(struct drm_device *dev)
15186 struct drm_i915_private *dev_priv = to_i915(dev);
15188 intel_init_gt_powersave(dev_priv);
15190 intel_init_clock_gating(dev_priv);
15192 intel_setup_overlay(dev_priv);
15195 int intel_connector_register(struct drm_connector *connector)
15197 struct intel_connector *intel_connector = to_intel_connector(connector);
15200 ret = intel_backlight_device_register(intel_connector);
15210 void intel_connector_unregister(struct drm_connector *connector)
15212 struct intel_connector *intel_connector = to_intel_connector(connector);
15214 intel_backlight_device_unregister(intel_connector);
15215 intel_panel_destroy_backlight(connector);
15218 static void intel_hpd_poll_fini(struct drm_device *dev)
15220 struct intel_connector *connector;
15221 struct drm_connector_list_iter conn_iter;
15223 /* First disable polling... */
15224 drm_kms_helper_poll_fini(dev);
15226 /* Then kill the work that may have been queued by hpd. */
15227 drm_connector_list_iter_begin(dev, &conn_iter);
15228 for_each_intel_connector_iter(connector, &conn_iter) {
15229 if (connector->modeset_retry_work.func)
15230 cancel_work_sync(&connector->modeset_retry_work);
15232 drm_connector_list_iter_end(&conn_iter);
15235 void intel_modeset_cleanup(struct drm_device *dev)
15237 struct drm_i915_private *dev_priv = to_i915(dev);
15239 flush_work(&dev_priv->atomic_helper.free_work);
15240 WARN_ON(!llist_empty(&dev_priv->atomic_helper.free_list));
15242 intel_disable_gt_powersave(dev_priv);
15245 * Interrupts and polling as the first thing to avoid creating havoc.
15246 * Too much stuff here (turning of connectors, ...) would
15247 * experience fancy races otherwise.
15249 intel_irq_uninstall(dev_priv);
15252 * Due to the hpd irq storm handling the hotplug work can re-arm the
15253 * poll handlers. Hence disable polling after hpd handling is shut down.
15255 intel_hpd_poll_fini(dev);
15257 /* poll work can call into fbdev, hence clean that up afterwards */
15258 intel_fbdev_fini(dev_priv);
15260 intel_unregister_dsm_handler();
15262 intel_fbc_global_disable(dev_priv);
15264 /* flush any delayed tasks or pending work */
15265 flush_scheduled_work();
15267 drm_mode_config_cleanup(dev);
15269 intel_cleanup_overlay(dev_priv);
15271 intel_cleanup_gt_powersave(dev_priv);
15273 intel_teardown_gmbus(dev_priv);
15276 void intel_connector_attach_encoder(struct intel_connector *connector,
15277 struct intel_encoder *encoder)
15279 connector->encoder = encoder;
15280 drm_mode_connector_attach_encoder(&connector->base,
15285 * set vga decode state - true == enable VGA decode
15287 int intel_modeset_vga_set_state(struct drm_i915_private *dev_priv, bool state)
15289 unsigned reg = INTEL_GEN(dev_priv) >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
15292 if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
15293 DRM_ERROR("failed to read control word\n");
15297 if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
15301 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
15303 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
15305 if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
15306 DRM_ERROR("failed to write control word\n");
15313 #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
15315 struct intel_display_error_state {
15317 u32 power_well_driver;
15319 int num_transcoders;
15321 struct intel_cursor_error_state {
15326 } cursor[I915_MAX_PIPES];
15328 struct intel_pipe_error_state {
15329 bool power_domain_on;
15332 } pipe[I915_MAX_PIPES];
15334 struct intel_plane_error_state {
15342 } plane[I915_MAX_PIPES];
15344 struct intel_transcoder_error_state {
15345 bool power_domain_on;
15346 enum transcoder cpu_transcoder;
15359 struct intel_display_error_state *
15360 intel_display_capture_error_state(struct drm_i915_private *dev_priv)
15362 struct intel_display_error_state *error;
15363 int transcoders[] = {
15371 if (INTEL_INFO(dev_priv)->num_pipes == 0)
15374 error = kzalloc(sizeof(*error), GFP_ATOMIC);
15378 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
15379 error->power_well_driver =
15380 I915_READ(HSW_PWR_WELL_CTL_DRIVER(HSW_DISP_PW_GLOBAL));
15382 for_each_pipe(dev_priv, i) {
15383 error->pipe[i].power_domain_on =
15384 __intel_display_power_is_enabled(dev_priv,
15385 POWER_DOMAIN_PIPE(i));
15386 if (!error->pipe[i].power_domain_on)
15389 error->cursor[i].control = I915_READ(CURCNTR(i));
15390 error->cursor[i].position = I915_READ(CURPOS(i));
15391 error->cursor[i].base = I915_READ(CURBASE(i));
15393 error->plane[i].control = I915_READ(DSPCNTR(i));
15394 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
15395 if (INTEL_GEN(dev_priv) <= 3) {
15396 error->plane[i].size = I915_READ(DSPSIZE(i));
15397 error->plane[i].pos = I915_READ(DSPPOS(i));
15399 if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
15400 error->plane[i].addr = I915_READ(DSPADDR(i));
15401 if (INTEL_GEN(dev_priv) >= 4) {
15402 error->plane[i].surface = I915_READ(DSPSURF(i));
15403 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
15406 error->pipe[i].source = I915_READ(PIPESRC(i));
15408 if (HAS_GMCH_DISPLAY(dev_priv))
15409 error->pipe[i].stat = I915_READ(PIPESTAT(i));
15412 /* Note: this does not include DSI transcoders. */
15413 error->num_transcoders = INTEL_INFO(dev_priv)->num_pipes;
15414 if (HAS_DDI(dev_priv))
15415 error->num_transcoders++; /* Account for eDP. */
15417 for (i = 0; i < error->num_transcoders; i++) {
15418 enum transcoder cpu_transcoder = transcoders[i];
15420 error->transcoder[i].power_domain_on =
15421 __intel_display_power_is_enabled(dev_priv,
15422 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
15423 if (!error->transcoder[i].power_domain_on)
15426 error->transcoder[i].cpu_transcoder = cpu_transcoder;
15428 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
15429 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
15430 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
15431 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
15432 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
15433 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
15434 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
15440 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
15443 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
15444 struct intel_display_error_state *error)
15446 struct drm_i915_private *dev_priv = m->i915;
15452 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev_priv)->num_pipes);
15453 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
15454 err_printf(m, "PWR_WELL_CTL2: %08x\n",
15455 error->power_well_driver);
15456 for_each_pipe(dev_priv, i) {
15457 err_printf(m, "Pipe [%d]:\n", i);
15458 err_printf(m, " Power: %s\n",
15459 onoff(error->pipe[i].power_domain_on));
15460 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
15461 err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
15463 err_printf(m, "Plane [%d]:\n", i);
15464 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
15465 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
15466 if (INTEL_GEN(dev_priv) <= 3) {
15467 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
15468 err_printf(m, " POS: %08x\n", error->plane[i].pos);
15470 if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
15471 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
15472 if (INTEL_GEN(dev_priv) >= 4) {
15473 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
15474 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
15477 err_printf(m, "Cursor [%d]:\n", i);
15478 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
15479 err_printf(m, " POS: %08x\n", error->cursor[i].position);
15480 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
15483 for (i = 0; i < error->num_transcoders; i++) {
15484 err_printf(m, "CPU transcoder: %s\n",
15485 transcoder_name(error->transcoder[i].cpu_transcoder));
15486 err_printf(m, " Power: %s\n",
15487 onoff(error->transcoder[i].power_domain_on));
15488 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
15489 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
15490 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
15491 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
15492 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
15493 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
15494 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);