arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022-2024 Jianhua Lu <lujianhua000@gmail.com>
   4  */
   5
   6 #include <dt-bindings/arm/qcom,ids.h>
   7 #include <dt-bindings/phy/phy.h>
   8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   9 #include <dt-bindings/usb/pd.h>
  10 #include "sm8250.dtsi"
  11 #include "pm8150.dtsi"
  12 #include "pm8150b.dtsi"
  13 #include "pm8150l.dtsi"
  14 #include "pm8009.dtsi"
  15
  16 /*
  17  * Delete following upstream (sm8250.dtsi) reserved
  18  * memory mappings which are different on this device.
  19  */
  20 /delete-node/ &adsp_mem;
  21 /delete-node/ &cdsp_secure_heap;
  22 /delete-node/ &slpi_mem;
  23 /delete-node/ &spss_mem;
  24 /delete-node/ &xbl_aop_mem;
  25
  26 / {
  27         chassis-type = "tablet";
  28
  29         /* required for bootloader to select correct board */
  30         qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
  31         qcom,board-id = <0x10008 0>;
  32
  33         chosen {
  34                 #address-cells = <2>;
  35                 #size-cells = <2>;
  36                 ranges;
  37
  38                 framebuffer: framebuffer@9c000000 {
  39                         compatible = "simple-framebuffer";
  40                         reg = <0x0 0x9c000000 0x0 0x2300000>;
  41                         width = <1600>;
  42                         height = <2560>;
  43                         stride = <(1600 * 4)>;
  44                         format = "a8r8g8b8";
  45                 };
  46         };
  47
  48         battery_l: battery-l {
  49                 compatible = "simple-battery";
  50                 voltage-min-design-microvolt = <3870000>;
  51                 energy-full-design-microwatt-hours = <16600000>;
  52                 charge-full-design-microamp-hours = <4300000>;
  53         };
  54
  55         battery_r: battery-r {
  56                 compatible = "simple-battery";
  57                 voltage-min-design-microvolt = <3870000>;
  58                 energy-full-design-microwatt-hours = <16600000>;
  59                 charge-full-design-microamp-hours = <4300000>;
  60         };
  61
  62         bl_vddpos_5p5: bl-vddpos-regulator {
  63                 compatible = "regulator-fixed";
  64                 regulator-name = "bl_vddpos_5p5";
  65                 regulator-min-microvolt = <5500000>;
  66                 regulator-max-microvolt = <5500000>;
  67                 regulator-enable-ramp-delay = <233>;
  68                 gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
  69                 enable-active-high;
  70                 regulator-boot-on;
  71         };
  72
  73         bl_vddneg_5p5: bl-vddneg-regulator {
  74                 compatible = "regulator-fixed";
  75                 regulator-name = "bl_vddneg_5p5";
  76                 regulator-min-microvolt = <5500000>;
  77                 regulator-max-microvolt = <5500000>;
  78                 regulator-enable-ramp-delay = <233>;
  79                 gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
  80                 enable-active-high;
  81                 regulator-boot-on;
  82         };
  83
  84         gpio_keys: gpio-keys {
  85                 compatible = "gpio-keys";
  86
  87                 pinctrl-names = "default";
  88                 pinctrl-0 = <&vol_up_n>;
  89
  90                 key-vol-up {
  91                         label = "Volume Up";
  92                         gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_VOLUMEUP>;
  94                         debounce-interval = <15>;
  95                         linux,can-disable;
  96                         wakeup-source;
  97                 };
  98         };
  99
 100         vph_pwr: vph-pwr-regulator {
 101                 compatible = "regulator-fixed";
 102                 regulator-name = "vph_pwr";
 103                 regulator-min-microvolt = <3700000>;
 104                 regulator-max-microvolt = <3700000>;
 105         };
 106
 107         /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
 108         vreg_s6c_0p88: smpc6-regulator {
 109                 compatible = "regulator-fixed";
 110                 regulator-name = "vreg_s6c_0p88";
 111                 regulator-min-microvolt = <880000>;
 112                 regulator-max-microvolt = <880000>;
 113                 regulator-always-on;
 114                 vin-supply = <&vph_pwr>;
 115         };
 116
 117         reserved-memory {
 118                 xbl_aop_mem: xbl-aop@80600000 {
 119                         reg = <0x0 0x80600000 0x0 0x260000>;
 120                         no-map;
 121                 };
 122
 123                 slpi_mem: slpi@88c00000 {
 124                         reg = <0x0 0x88c00000 0x0 0x2f00000>;
 125                         no-map;
 126                 };
 127
 128                 adsp_mem: adsp@8bb00000 {
 129                         reg = <0x0 0x8bb00000 0x0 0x2500000>;
 130                         no-map;
 131                 };
 132
 133                 spss_mem: spss@8e000000 {
 134                         reg = <0x0 0x8e000000 0x0 0x100000>;
 135                         no-map;
 136                 };
 137
 138                 cdsp_secure_heap: cdsp-secure-heap@8e100000 {
 139                         reg = <0x0 0x8e100000 0x0 0x4600000>;
 140                         no-map;
 141                 };
 142
 143                 cont_splash_mem: cont-splash@9c000000 {
 144                         reg = <0x0 0x9c000000 0x0 0x2300000>;
 145                         no-map;
 146                 };
 147
 148                 ramoops@b0000000 {
 149                         compatible = "ramoops";
 150                         reg = <0x0 0xb0000000 0x0 0x400000>;
 151                         record-size = <0x1000>;
 152                         console-size = <0x200000>;
 153                         ecc-size = <16>;
 154                         no-map;
 155                 };
 156         };
 157 };
 158
 159 &adsp {
 160         firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn";
 161         status = "okay";
 162 };
 163
 164 &apps_rsc {
 165         regulators-0 {
 166                 compatible = "qcom,pm8150-rpmh-regulators";
 167                 qcom,pmic-id = "a";
 168
 169                 vdd-s1-supply = <&vph_pwr>;
 170                 vdd-s2-supply = <&vph_pwr>;
 171                 vdd-s3-supply = <&vph_pwr>;
 172                 vdd-s4-supply = <&vph_pwr>;
 173                 vdd-s5-supply = <&vph_pwr>;
 174                 vdd-s6-supply = <&vph_pwr>;
 175                 vdd-s7-supply = <&vph_pwr>;
 176                 vdd-s8-supply = <&vph_pwr>;
 177                 vdd-s9-supply = <&vph_pwr>;
 178                 vdd-s10-supply = <&vph_pwr>;
 179                 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
 180                 vdd-l2-l10-supply = <&vreg_bob>;
 181                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 182                 vdd-l6-l9-supply = <&vreg_s8c_1p35>;
 183                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 184                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 185
 186                 /* (S1+S2+S3) - cx.lvl (ARC) */
 187
 188                 vreg_s4a_1p8: smps4 {
 189                         regulator-name = "vreg_s4a_1p8";
 190                         regulator-min-microvolt = <1800000>;
 191                         regulator-max-microvolt = <1920000>;
 192                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 193                         regulator-allow-set-load;
 194                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 195                                                    RPMH_REGULATOR_MODE_HPM>;
 196                 };
 197
 198                 vreg_s5a_1p9: smps5 {
 199                         regulator-name = "vreg_s5a_1p9";
 200                         regulator-min-microvolt = <1900000>;
 201                         regulator-max-microvolt = <2040000>;
 202                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 203                 };
 204
 205                 vreg_s6a_0p95: smps6 {
 206                         regulator-name = "vreg_s6a_0p95";
 207                         regulator-min-microvolt = <950000>;
 208                         regulator-max-microvolt = <1128000>;
 209                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 210                 };
 211
 212                 vreg_l2a_3p1: ldo2 {
 213                         regulator-name = "vreg_l2a_3p1";
 214                         regulator-min-microvolt = <3072000>;
 215                         regulator-max-microvolt = <3072000>;
 216                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 217                 };
 218
 219                 vreg_l3a_0p9: ldo3 {
 220                         regulator-name = "vreg_l3a_0p9";
 221                         regulator-min-microvolt = <928000>;
 222                         regulator-max-microvolt = <932000>;
 223                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 224                 };
 225
 226                 /* L4 - lmx.lvl (ARC) */
 227
 228                 vreg_l5a_0p88: ldo5 {
 229                         regulator-name = "vreg_l5a_0p88";
 230                         regulator-min-microvolt = <880000>;
 231                         regulator-max-microvolt = <880000>;
 232                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 233                 };
 234
 235                 vreg_l6a_1p2: ldo6 {
 236                         regulator-name = "vreg_l6a_1p2";
 237                         regulator-min-microvolt = <1200000>;
 238                         regulator-max-microvolt = <1200000>;
 239                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 240                         regulator-allow-set-load;
 241                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 242                                                    RPMH_REGULATOR_MODE_HPM>;
 243                 };
 244
 245                 /* L7 is unused. */
 246
 247                 vreg_l9a_1p2: ldo9 {
 248                         regulator-name = "vreg_l9a_1p2";
 249                         regulator-min-microvolt = <1200000>;
 250                         regulator-max-microvolt = <1200000>;
 251                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 252                 };
 253
 254                 /* L10 is unused, L11 - lcx.lvl (ARC) */
 255
 256                 vreg_l12a_1p8: ldo12 {
 257                         regulator-name = "vreg_l12a_1p8";
 258                         regulator-min-microvolt = <1800000>;
 259                         regulator-max-microvolt = <1800000>;
 260                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 261                 };
 262
 263                 /* L13 is unused. */
 264
 265                 vreg_l14a_1p88: ldo14 {
 266                         regulator-name = "vreg_l14a_1p88";
 267                         regulator-min-microvolt = <1880000>;
 268                         regulator-max-microvolt = <1880000>;
 269                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 270                 };
 271
 272                 /* L15 & L16 are unused. */
 273
 274                 vreg_l17a_3p0: ldo17 {
 275                         regulator-name = "vreg_l17a_3p0";
 276                         regulator-min-microvolt = <2496000>;
 277                         regulator-max-microvolt = <3008000>;
 278                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 279                         regulator-allow-set-load;
 280                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 281                                                    RPMH_REGULATOR_MODE_HPM>;
 282                 };
 283
 284                 vreg_l18a_0p9: ldo18 {
 285                         regulator-name = "vreg_l18a_0p9";
 286                         regulator-min-microvolt = <800000>;
 287                         regulator-max-microvolt = <920000>;
 288                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 289                 };
 290         };
 291
 292         /*
 293          * Remaining regulators that are not yet supported:
 294          * OLEDB: 4925000-8100000
 295          * ab: 4600000-6100000
 296          * ibb: 800000-5400000
 297          */
 298         regulators-1 {
 299                 compatible = "qcom,pm8150l-rpmh-regulators";
 300                 qcom,pmic-id = "c";
 301
 302                 vdd-s1-supply = <&vph_pwr>;
 303                 vdd-s2-supply = <&vph_pwr>;
 304                 vdd-s3-supply = <&vph_pwr>;
 305                 vdd-s4-supply = <&vph_pwr>;
 306                 vdd-s5-supply = <&vph_pwr>;
 307                 vdd-s6-supply = <&vph_pwr>;
 308                 vdd-s7-supply = <&vph_pwr>;
 309                 vdd-s8-supply = <&vph_pwr>;
 310                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 311                 vdd-l2-l3-supply = <&vreg_s8c_1p35>;
 312                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 313                 vdd-l7-l11-supply = <&vreg_bob>;
 314                 vdd-l9-l10-supply = <&vreg_bob>;
 315                 vdd-bob-supply = <&vph_pwr>;
 316
 317                 vreg_bob: bob {
 318                         regulator-name = "vreg_bob";
 319                         regulator-min-microvolt = <3350000>;
 320                         regulator-max-microvolt = <3960000>;
 321                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 322                 };
 323
 324                 /*
 325                  * S1-S6 are ARCs:
 326                  * (S1+S2) - gfx.lvl,
 327                  * S3 - mx.lvl,
 328                  * (S4+S5) - mmcx.lvl,
 329                  * S6 - ebi.lvl
 330                  */
 331
 332                 vreg_s7c_0p35: smps7 {
 333                         regulator-name = "vreg_s7c_0p35";
 334                         regulator-min-microvolt = <348000>;
 335                         regulator-max-microvolt = <1000000>;
 336                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 337                 };
 338
 339                 vreg_s8c_1p35: smps8 {
 340                         regulator-name = "vreg_s8c_1p35";
 341                         regulator-min-microvolt = <1350000>;
 342                         regulator-max-microvolt = <1400000>;
 343                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 344                 };
 345
 346                 vreg_l1c_1p8: ldo1 {
 347                         regulator-name = "vreg_l1c_1p8";
 348                         regulator-min-microvolt = <1800000>;
 349                         regulator-max-microvolt = <1800000>;
 350                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 351                 };
 352
 353                 /* L2-4 are unused. */
 354
 355                 vreg_l5c_1p8: ldo5 {
 356                         regulator-name = "vreg_l5c_1p8";
 357                         regulator-min-microvolt = <1800000>;
 358                         regulator-max-microvolt = <2800000>;
 359                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 360                 };
 361
 362                 vreg_l6c_2p9: ldo6 {
 363                         regulator-name = "vreg_l6c_2p9";
 364                         regulator-min-microvolt = <1800000>;
 365                         regulator-max-microvolt = <2960000>;
 366                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 367                         regulator-allow-set-load;
 368                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 369                                                    RPMH_REGULATOR_MODE_HPM>;
 370                 };
 371
 372                 vreg_l7c_2p85: ldo7 {
 373                         regulator-name = "vreg_l7c_2p85";
 374                         regulator-min-microvolt = <2856000>;
 375                         regulator-max-microvolt = <3104000>;
 376                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 377                 };
 378
 379                 vreg_l8c_1p8: ldo8 {
 380                         regulator-name = "vreg_l8c_1p8";
 381                         regulator-min-microvolt = <1800000>;
 382                         regulator-max-microvolt = <1800000>;
 383                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 384                 };
 385
 386                 vreg_l9c_2p9: ldo9 {
 387                         regulator-name = "vreg_l9c_2p9";
 388                         regulator-min-microvolt = <2704000>;
 389                         regulator-max-microvolt = <2960000>;
 390                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 391                         regulator-allow-set-load;
 392                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 393                                                    RPMH_REGULATOR_MODE_HPM>;
 394                 };
 395
 396                 vreg_l10c_3p3: ldo10 {
 397                         regulator-name = "vreg_l10c_3p3";
 398                         regulator-min-microvolt = <3296000>;
 399                         regulator-max-microvolt = <3296000>;
 400                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 401                 };
 402
 403                 vreg_l11c_3p0: ldo11 {
 404                         regulator-name = "vreg_l11c_3p0";
 405                         regulator-min-microvolt = <3000000>;
 406                         regulator-max-microvolt = <3000000>;
 407                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 408                 };
 409         };
 410
 411         regulators-2 {
 412                 compatible = "qcom,pm8009-rpmh-regulators";
 413                 qcom,pmic-id = "f";
 414
 415                 vdd-s1-supply = <&vph_pwr>;
 416                 vdd-s2-supply = <&vreg_bob>;
 417                 vdd-l2-supply = <&vreg_s8c_1p35>;
 418                 vdd-l5-l6-supply = <&vreg_bob>;
 419                 vdd-l7-supply = <&vreg_s4a_1p8>;
 420
 421                 vreg_s1f_1p2: smps1 {
 422                         regulator-name = "vreg_s1f_1p2";
 423                         regulator-min-microvolt = <1200000>;
 424                         regulator-max-microvolt = <1200000>;
 425                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 426                 };
 427
 428                 vreg_s2f_0p5: smps2 {
 429                         regulator-name = "vreg_s2f_0p5";
 430                         regulator-min-microvolt = <512000>;
 431                         regulator-max-microvolt = <1100000>;
 432                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 433                 };
 434
 435                 /* L1 is unused. */
 436
 437                 vreg_l2f_1p3: ldo2 {
 438                         regulator-name = "vreg_l2f_1p3";
 439                         regulator-min-microvolt = <1304000>;
 440                         regulator-max-microvolt = <1304000>;
 441                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 442                 };
 443
 444                 /* L3 & L4 are unused. */
 445
 446                 vreg_l5f_2p8: ldo5 {
 447                         regulator-name = "vreg_l5f_2p85";
 448                         regulator-min-microvolt = <2800000>;
 449                         regulator-max-microvolt = <2800000>;
 450                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 451                 };
 452
 453                 vreg_l6f_2p8: ldo6 {
 454                         regulator-name = "vreg_l6f_2p8";
 455                         regulator-min-microvolt = <2800000>;
 456                         regulator-max-microvolt = <2800000>;
 457                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 458                 };
 459
 460                 vreg_l7f_1p8: ldo7 {
 461                         regulator-name = "vreg_l7f_1p8";
 462                         regulator-min-microvolt = <1800000>;
 463                         regulator-max-microvolt = <1800000>;
 464                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 465                 };
 466         };
 467 };
 468
 469 &cdsp {
 470         firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn";
 471         status = "okay";
 472 };
 473
 474 &gmu {
 475         status = "okay";
 476 };
 477
 478 &gpi_dma0 {
 479         status = "okay";
 480 };
 481
 482 &gpi_dma1 {
 483         status = "okay";
 484 };
 485
 486 &gpi_dma2 {
 487         status = "okay";
 488 };
 489
 490 &gpu {
 491         status = "okay";
 492
 493         zap-shader {
 494                 memory-region = <&gpu_mem>;
 495                 firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
 496         };
 497 };
 498
 499 &i2c0 {
 500         clock-frequency = <400000>;
 501         status = "okay";
 502
 503         fuel-gauge@55 {
 504                 compatible = "ti,bq27z561";
 505                 reg = <0x55>;
 506                 monitored-battery = <&battery_r>;
 507         };
 508 };
 509
 510 &i2c11 {
 511         clock-frequency = <400000>;
 512         status = "okay";
 513
 514         backlight: backlight@11 {
 515                 compatible = "kinetic,ktz8866";
 516                 reg = <0x11>;
 517                 vddpos-supply = <&bl_vddpos_5p5>;
 518                 vddneg-supply = <&bl_vddneg_5p5>;
 519                 enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
 520                 current-num-sinks = <5>;
 521                 kinetic,current-ramp-delay-ms = <128>;
 522                 kinetic,led-enable-ramp-delay-ms = <1>;
 523                 kinetic,enable-lcd-bias;
 524         };
 525 };
 526
 527 &i2c13 {
 528         clock-frequency = <400000>;
 529         status = "okay";
 530
 531         fuel-gauge@55 {
 532                 compatible = "ti,bq27z561";
 533                 reg = <0x55>;
 534                 monitored-battery = <&battery_l>;
 535         };
 536 };
 537
 538 &mdss {
 539         status = "okay";
 540 };
 541
 542 &mdss_dsi0 {
 543         vdda-supply = <&vreg_l9a_1p2>;
 544         qcom,dual-dsi-mode;
 545         qcom,sync-dual-dsi;
 546         qcom,master-dsi;
 547         status = "okay";
 548
 549         display_panel: panel@0 {
 550                 reg = <0>;
 551                 vddio-supply = <&vreg_l14a_1p88>;
 552                 reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
 553                 backlight = <&backlight>;
 554                 rotation = <90>;
 555
 556                 status = "disabled";
 557
 558                 ports {
 559                         #address-cells = <1>;
 560                         #size-cells = <0>;
 561
 562                         port@0 {
 563                                 reg = <0>;
 564
 565                                 panel_in_0: endpoint {
 566                                         remote-endpoint = <&mdss_dsi0_out>;
 567                                 };
 568                         };
 569
 570                         port@1 {
 571                                 reg = <1>;
 572
 573                                 panel_in_1: endpoint {
 574                                         remote-endpoint = <&mdss_dsi1_out>;
 575                                 };
 576                         };
 577                 };
 578         };
 579 };
 580
 581 &mdss_dsi0_out {
 582         data-lanes = <0 1 2>;
 583         remote-endpoint = <&panel_in_0>;
 584 };
 585
 586 &mdss_dsi0_phy {
 587         vdds-supply = <&vreg_l5a_0p88>;
 588         phy-type = <PHY_TYPE_CPHY>;
 589         status = "okay";
 590 };
 591
 592 &mdss_dsi1 {
 593         vdda-supply = <&vreg_l9a_1p2>;
 594         qcom,dual-dsi-mode;
 595         qcom,sync-dual-dsi;
 596         /* DSI1 is slave, so use DSI0 clocks */
 597         assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 598         status = "okay";
 599 };
 600
 601 &mdss_dsi1_out {
 602         data-lanes = <0 1 2>;
 603         remote-endpoint = <&panel_in_1>;
 604 };
 605
 606 &mdss_dsi1_phy {
 607         vdds-supply = <&vreg_l5a_0p88>;
 608         phy-type = <PHY_TYPE_CPHY>;
 609         status = "okay";
 610 };
 611
 612 &pcie0 {
 613         status = "okay";
 614 };
 615
 616 &pcie0_phy {
 617         vdda-phy-supply = <&vreg_l5a_0p88>;
 618         vdda-pll-supply = <&vreg_l9a_1p2>;
 619         status = "okay";
 620 };
 621
 622 &pm8150_gpios {
 623         vol_up_n: vol-up-n-state {
 624                 pins = "gpio6";
 625                 function = "normal";
 626                 power-source = <1>;
 627                 input-enable;
 628                 bias-pull-up;
 629         };
 630 };
 631
 632 &pm8150b_typec {
 633         vdd-pdphy-supply = <&vreg_l2a_3p1>;
 634         status = "okay";
 635
 636         connector {
 637                 compatible = "usb-c-connector";
 638
 639                 power-role = "source";
 640                 data-role = "dual";
 641                 self-powered;
 642
 643                 source-pdos = <PDO_FIXED(5000, 3000,
 644                                          PDO_FIXED_DUAL_ROLE |
 645                                          PDO_FIXED_USB_COMM |
 646                                          PDO_FIXED_DATA_SWAP)>;
 647
 648                 ports {
 649                         #address-cells = <1>;
 650                         #size-cells = <0>;
 651
 652                         port@0 {
 653                                 reg = <0>;
 654
 655                                 pm8150b_role_switch_in: endpoint {
 656                                         remote-endpoint = <&usb_1_role_switch_out>;
 657                                 };
 658                         };
 659                 };
 660         };
 661 };
 662
 663 &pm8150b_vbus {
 664         status = "okay";
 665 };
 666
 667 &pon_pwrkey {
 668         status = "okay";
 669 };
 670
 671 &pon_resin {
 672         linux,code = <KEY_VOLUMEDOWN>;
 673         status = "okay";
 674 };
 675
 676 &qupv3_id_0 {
 677         status = "okay";
 678 };
 679
 680 &qupv3_id_1 {
 681         status = "okay";
 682 };
 683
 684 &qupv3_id_2 {
 685         status = "okay";
 686 };
 687
 688 &slpi {
 689         firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn";
 690         status = "okay";
 691 };
 692
 693 &tlmm {
 694         gpio-reserved-ranges = <40 4>;
 695 };
 696
 697 &usb_1 {
 698         /* USB 2.0 only */
 699         qcom,select-utmi-as-pipe-clk;
 700         status = "okay";
 701 };
 702
 703 &usb_1_dwc3 {
 704         dr_mode = "otg";
 705         maximum-speed = "high-speed";
 706         /* Remove USB3 phy */
 707         phys = <&usb_1_hsphy>;
 708         phy-names = "usb2-phy";
 709         usb-role-switch;
 710 };
 711
 712 &usb_1_hsphy {
 713         vdda-pll-supply = <&vreg_l5a_0p88>;
 714         vdda18-supply = <&vreg_l12a_1p8>;
 715         vdda33-supply = <&vreg_l2a_3p1>;
 716         status = "okay";
 717 };
 718
 719 &usb_1_role_switch_out {
 720         remote-endpoint = <&pm8150b_role_switch_in>;
 721 };
 722
 723 &ufs_mem_hc {
 724         vcc-supply = <&vreg_l17a_3p0>;
 725         vcc-max-microamp = <800000>;
 726         vccq-supply = <&vreg_l6a_1p2>;
 727         vccq-max-microamp = <800000>;
 728         vccq2-supply = <&vreg_s4a_1p8>;
 729         vccq2-max-microamp = <800000>;
 730         status = "okay";
 731 };
 732
 733 &ufs_mem_phy {
 734         vdda-phy-supply = <&vreg_l5a_0p88>;
 735         vdda-pll-supply = <&vreg_l9a_1p2>;
 736         status = "okay";
 737 };
 738
 739 &venus {
 740         firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
 741         status = "okay";
 742 };