arch/arm64/boot/dts/qcom/qdu1000.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
   4  */
   5
   6 #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
   7 #include <dt-bindings/clock/qcom,rpmh.h>
   8 #include <dt-bindings/dma/qcom-gpi.h>
   9 #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/power/qcom-rpmpd.h>
  12 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
  13
  14 / {
  15         interrupt-parent = <&intc>;
  16
  17         #address-cells = <2>;
  18         #size-cells = <2>;
  19
  20         chosen: chosen { };
  21
  22         cpus {
  23                 #address-cells = <2>;
  24                 #size-cells = <0>;
  25
  26                 CPU0: cpu@0 {
  27                         device_type = "cpu";
  28                         compatible = "arm,cortex-a55";
  29                         reg = <0x0 0x0>;
  30                         clocks = <&cpufreq_hw 0>;
  31                         enable-method = "psci";
  32                         power-domains = <&CPU_PD0>;
  33                         power-domain-names = "psci";
  34                         qcom,freq-domains = <&cpufreq_hw 0>;
  35                         next-level-cache = <&L2_0>;
  36                         L2_0: l2-cache {
  37                                 compatible = "cache";
  38                                 cache-level = <2>;
  39                                 cache-unified;
  40                                 next-level-cache = <&L3_0>;
  41                                 L3_0: l3-cache {
  42                                         compatible = "cache";
  43                                         cache-level = <3>;
  44                                         cache-unified;
  45                                 };
  46                         };
  47                 };
  48
  49                 CPU1: cpu@100 {
  50                         device_type = "cpu";
  51                         compatible = "arm,cortex-a55";
  52                         reg = <0x0 0x100>;
  53                         clocks = <&cpufreq_hw 0>;
  54                         enable-method = "psci";
  55                         power-domains = <&CPU_PD1>;
  56                         power-domain-names = "psci";
  57                         qcom,freq-domains = <&cpufreq_hw 0>;
  58                         next-level-cache = <&L2_100>;
  59                         L2_100: l2-cache {
  60                                 compatible = "cache";
  61                                 cache-level = <2>;
  62                                 cache-unified;
  63                                 next-level-cache = <&L3_0>;
  64                         };
  65                 };
  66
  67                 CPU2: cpu@200 {
  68                         device_type = "cpu";
  69                         compatible = "arm,cortex-a55";
  70                         reg = <0x0 0x200>;
  71                         clocks = <&cpufreq_hw 0>;
  72                         enable-method = "psci";
  73                         power-domains = <&CPU_PD2>;
  74                         power-domain-names = "psci";
  75                         qcom,freq-domains = <&cpufreq_hw 0>;
  76                         next-level-cache = <&L2_200>;
  77                         L2_200: l2-cache {
  78                                 compatible = "cache";
  79                                 cache-level = <2>;
  80                                 cache-unified;
  81                                 next-level-cache = <&L3_0>;
  82                         };
  83                 };
  84
  85                 CPU3: cpu@300 {
  86                         device_type = "cpu";
  87                         compatible = "arm,cortex-a55";
  88                         reg = <0x0 0x300>;
  89                         clocks = <&cpufreq_hw 0>;
  90                         enable-method = "psci";
  91                         power-domains = <&CPU_PD3>;
  92                         power-domain-names = "psci";
  93                         qcom,freq-domains = <&cpufreq_hw 0>;
  94                         next-level-cache = <&L2_300>;
  95                         L2_300: l2-cache {
  96                                 compatible = "cache";
  97                                 cache-level = <2>;
  98                                 cache-unified;
  99                                 next-level-cache = <&L3_0>;
 100                         };
 101                 };
 102
 103                 cpu-map {
 104                         cluster0 {
 105                                 core0 {
 106                                         cpu = <&CPU0>;
 107                                 };
 108
 109                                 core1 {
 110                                         cpu = <&CPU1>;
 111                                 };
 112
 113                                 core2 {
 114                                         cpu = <&CPU2>;
 115                                 };
 116
 117                                 core3 {
 118                                         cpu = <&CPU3>;
 119                                 };
 120                         };
 121                 };
 122         };
 123
 124         idle-states {
 125                 entry-method = "psci";
 126
 127                 CPU_OFF: cpu-sleep-0 {
 128                         compatible = "arm,idle-state";
 129                         entry-latency-us = <274>;
 130                         exit-latency-us = <480>;
 131                         min-residency-us = <3934>;
 132                         arm,psci-suspend-param = <0x40000004>;
 133                         local-timer-stop;
 134                 };
 135         };
 136
 137         domain-idle-states {
 138                 CLUSTER_SLEEP_0: cluster-sleep-0 {
 139                         compatible = "domain-idle-state";
 140                         entry-latency-us = <584>;
 141                         exit-latency-us = <2332>;
 142                         min-residency-us = <6118>;
 143                         arm,psci-suspend-param = <0x41000044>;
 144                 };
 145
 146                 CLUSTER_SLEEP_1: cluster-sleep-1 {
 147                         compatible = "domain-idle-state";
 148                         entry-latency-us = <2893>;
 149                         exit-latency-us = <4023>;
 150                         min-residency-us = <9987>;
 151                         arm,psci-suspend-param = <0x41003344>;
 152                 };
 153         };
 154
 155         firmware {
 156                 scm {
 157                         compatible = "qcom,scm-qdu1000", "qcom,scm";
 158                 };
 159         };
 160
 161         mc_virt: interconnect-0 {
 162                 compatible = "qcom,qdu1000-mc-virt";
 163                 qcom,bcm-voters = <&apps_bcm_voter>;
 164                 #interconnect-cells = <2>;
 165         };
 166
 167         clk_virt: interconnect-1 {
 168                 compatible = "qcom,qdu1000-clk-virt";
 169                 qcom,bcm-voters = <&apps_bcm_voter>;
 170                 #interconnect-cells = <2>;
 171         };
 172
 173         memory@80000000 {
 174                 device_type = "memory";
 175                 /* We expect the bootloader to fill in the size */
 176                 reg = <0x0 0x80000000 0x0 0x0>;
 177         };
 178
 179         pmu {
 180                 compatible = "arm,armv8-pmuv3";
 181                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 182         };
 183
 184         psci {
 185                 compatible = "arm,psci-1.0";
 186                 method = "smc";
 187
 188                 CPU_PD0: power-domain-cpu0 {
 189                         #power-domain-cells = <0>;
 190                         power-domains = <&CLUSTER_PD>;
 191                         domain-idle-states = <&CPU_OFF>;
 192                 };
 193
 194                 CPU_PD1: power-domain-cpu1 {
 195                         #power-domain-cells = <0>;
 196                         power-domains = <&CLUSTER_PD>;
 197                         domain-idle-states = <&CPU_OFF>;
 198                 };
 199
 200                 CPU_PD2: power-domain-cpu2 {
 201                         #power-domain-cells = <0>;
 202                         power-domains = <&CLUSTER_PD>;
 203                         domain-idle-states = <&CPU_OFF>;
 204                 };
 205
 206                 CPU_PD3: power-domain-cpu3 {
 207                         #power-domain-cells = <0>;
 208                         power-domains = <&CLUSTER_PD>;
 209                         domain-idle-states = <&CPU_OFF>;
 210                 };
 211
 212                 CLUSTER_PD: power-domain-cluster {
 213                         #power-domain-cells = <0>;
 214                         domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
 215                 };
 216         };
 217
 218         reserved_memory: reserved-memory {
 219                 #address-cells = <2>;
 220                 #size-cells = <2>;
 221                 ranges;
 222
 223                 hyp_mem: hyp@80000000 {
 224                         reg = <0x0 0x80000000 0x0 0x600000>;
 225                         no-map;
 226                 };
 227
 228                 xbl_dt_log_mem: xbl-dt-log@80600000 {
 229                         reg = <0x0 0x80600000 0x0 0x40000>;
 230                         no-map;
 231                 };
 232
 233                 xbl_ramdump_mem: xbl-ramdump@80640000 {
 234                         reg = <0x0 0x80640000 0x0 0x1c0000>;
 235                         no-map;
 236                 };
 237
 238                 aop_image_mem: aop-image@80800000 {
 239                         reg = <0x0 0x80800000 0x0 0x60000>;
 240                         no-map;
 241                 };
 242
 243                 aop_cmd_db_mem: aop-cmd-db@80860000 {
 244                         compatible = "qcom,cmd-db";
 245                         reg = <0x0 0x80860000 0x0 0x20000>;
 246                         no-map;
 247                 };
 248
 249                 aop_config_mem: aop-config@80880000 {
 250                         reg = <0x0 0x80880000 0x0 0x20000>;
 251                         no-map;
 252                 };
 253
 254                 tme_crash_dump_mem: tme-crash-dump@808a0000 {
 255                         reg = <0x0 0x808a0000 0x0 0x40000>;
 256                         no-map;
 257                 };
 258
 259                 tme_log_mem: tme-log@808e0000 {
 260                         reg = <0x0 0x808e0000 0x0 0x4000>;
 261                         no-map;
 262                 };
 263
 264                 uefi_log_mem: uefi-log@808e4000 {
 265                         reg = <0x0 0x808e4000 0x0 0x10000>;
 266                         no-map;
 267                 };
 268
 269                 smem_mem: smem@80900000 {
 270                         compatible = "qcom,smem";
 271                         reg = <0x0 0x80900000 0x0 0x200000>;
 272                         no-map;
 273                         hwlocks = <&tcsr_mutex 3>;
 274                 };
 275
 276                 cpucp_fw_mem: cpucp-fw@80b00000 {
 277                         reg = <0x0 0x80b00000 0x0 0x100000>;
 278                         no-map;
 279                 };
 280
 281                 xbl_sc_mem: memory@80c00000 {
 282                         reg = <0x0 0x80c00000 0x0 0x40000>;
 283                         no-map;
 284                 };
 285
 286                 tz_stat_mem: tz-stat@81d00000 {
 287                         reg = <0x0 0x81d00000 0x0 0x100000>;
 288                         no-map;
 289                 };
 290
 291                 tags_mem: tags@81e00000 {
 292                         reg = <0x0 0x81e00000 0x0 0x500000>;
 293                         no-map;
 294                 };
 295
 296                 qtee_mem: qtee@82300000 {
 297                         reg = <0x0 0x82300000 0x0 0x500000>;
 298                         no-map;
 299                 };
 300
 301                 ta_mem: ta@82800000 {
 302                         reg = <0x0 0x82800000 0x0 0xa00000>;
 303                         no-map;
 304                 };
 305
 306                 fs1_mem: fs1@83200000 {
 307                         reg = <0x0 0x83200000 0x0 0x400000>;
 308                         no-map;
 309                 };
 310
 311                 fs2_mem: fs2@83600000 {
 312                         reg = <0x0 0x83600000 0x0 0x400000>;
 313                         no-map;
 314                 };
 315
 316                 fs3_mem: fs3@83a00000 {
 317                         reg = <0x0 0x83a00000 0x0 0x400000>;
 318                         no-map;
 319                 };
 320
 321                 /* Linux kernel image is loaded at 0x83e00000 */
 322
 323                 ipa_fw_mem: ipa-fw@8be00000 {
 324                         reg = <0x0 0x8be00000 0x0 0x10000>;
 325                         no-map;
 326                 };
 327
 328                 ipa_gsi_mem: ipa-gsi@8be10000 {
 329                         reg = <0x0 0x8be10000 0x0 0x14000>;
 330                         no-map;
 331                 };
 332
 333                 mpss_mem: mpss@8c000000 {
 334                         reg = <0x0 0x8c000000 0x0 0x12c00000>;
 335                         no-map;
 336                 };
 337
 338                 q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
 339                         reg = <0x0 0x9ec00000 0x0 0x80000>;
 340                         no-map;
 341                 };
 342
 343                 tenx_mem: tenx@a0000000 {
 344                         reg = <0x0 0xa0000000 0x0 0x19600000>;
 345                         no-map;
 346                 };
 347
 348                 oem_tenx_mem: oem-tenx@b9600000 {
 349                         reg = <0x0 0xb9600000 0x0 0x6a00000>;
 350                         no-map;
 351                 };
 352
 353                 tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 {
 354                         reg = <0x0 0xc0000000 0x0 0x3200000>;
 355                         no-map;
 356                 };
 357
 358                 ipa_buffer_mem: ipa-buffer@c3200000 {
 359                         reg = <0x0 0xc3200000 0x0 0x12c00000>;
 360                         no-map;
 361                 };
 362         };
 363
 364         soc: soc@0 {
 365                 compatible = "simple-bus";
 366                 #address-cells = <2>;
 367                 #size-cells = <2>;
 368                 ranges = <0 0 0 0 0x10 0>;
 369                 dma-ranges = <0 0 0 0 0x10 0>;
 370
 371                 gcc: clock-controller@80000 {
 372                         compatible = "qcom,qdu1000-gcc";
 373                         reg = <0x0 0x80000 0x0 0x1f4200>;
 374                         clocks = <&rpmhcc RPMH_CXO_CLK>,
 375                                  <&sleep_clk>,
 376                                  <0>,
 377                                  <0>,
 378                                  <0>;
 379                         #clock-cells = <1>;
 380                         #reset-cells = <1>;
 381                         #power-domain-cells = <1>;
 382                 };
 383
 384                 gpi_dma0: dma-controller@900000  {
 385                         compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 386                         reg = <0x0 0x900000 0x0 0x60000>;
 387                         interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 388                                      <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 389                                      <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
 390                                      <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
 391                                      <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
 392                                      <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
 393                                      <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
 394                                      <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
 395                                      <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
 396                                      <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
 397                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 398                                      <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 399                         dma-channels = <12>;
 400                         dma-channel-mask = <0x3f>;
 401                         iommus = <&apps_smmu 0xf6 0x0>;
 402                         #dma-cells = <3>;
 403                 };
 404
 405                 qupv3_id_0: geniqup@9c0000 {
 406                         compatible = "qcom,geni-se-qup";
 407                         reg = <0x0 0x9c0000 0x0 0x2000>;
 408                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 409                                 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
 410                         clock-names = "m-ahb", "s-ahb";
 411                         iommus = <&apps_smmu 0xe3 0x0>;
 412                         interconnects = <&clk_virt MASTER_QUP_CORE_0 0
 413                                          &clk_virt SLAVE_QUP_CORE_0 0>;
 414                         interconnect-names = "qup-core";
 415
 416                         #address-cells = <2>;
 417                         #size-cells = <2>;
 418                         ranges;
 419                         status = "disabled";
 420
 421                         uart0: serial@980000 {
 422                                 compatible = "qcom,geni-uart";
 423                                 reg = <0x0 0x980000 0x0 0x4000>;
 424                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 425                                 clock-names = "se";
 426                                 pinctrl-0 = <&qup_uart0_default>;
 427                                 pinctrl-names = "default";
 428                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 429                                 status = "disabled";
 430                         };
 431
 432                         i2c1: i2c@984000 {
 433                                 compatible = "qcom,geni-i2c";
 434                                 reg = <0x0 0x984000 0x0 0x4000>;
 435                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 436                                 clock-names = "se";
 437                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 438                                 pinctrl-0 = <&qup_i2c1_data_clk>;
 439                                 pinctrl-names = "default";
 440                                 #address-cells = <1>;
 441                                 #size-cells = <0>;
 442                                 status = "disabled";
 443                         };
 444
 445                         spi1: spi@984000 {
 446                                 compatible = "qcom,geni-spi";
 447                                 reg = <0x0 0x984000 0x0 0x4000>;
 448                                 #address-cells = <1>;
 449                                 #size-cells = <0>;
 450                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 451                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 452                                 clock-names = "se";
 453                                 pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
 454                                 pinctrl-names = "default";
 455                                 status = "disabled";
 456                         };
 457
 458                         i2c2: i2c@988000 {
 459                                 compatible = "qcom,geni-i2c";
 460                                 reg = <0x0 0x988000 0x0 0x4000>;
 461                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 462                                 clock-names = "se";
 463                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 464                                 pinctrl-0 = <&qup_i2c2_data_clk>;
 465                                 pinctrl-names = "default";
 466                                 #address-cells = <1>;
 467                                 #size-cells = <0>;
 468                                 status = "disabled";
 469                         };
 470
 471                         spi2: spi@988000 {
 472                                 compatible = "qcom,geni-spi";
 473                                 reg = <0x0 0x988000 0x0 0x4000>;
 474                                 #address-cells = <1>;
 475                                 #size-cells = <0>;
 476                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 477                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 478                                 clock-names = "se";
 479                                 pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
 480                                 pinctrl-names = "default";
 481                                 status = "disabled";
 482                         };
 483
 484                         i2c3: i2c@98c000 {
 485                                 compatible = "qcom,geni-i2c";
 486                                 reg = <0x0 0x98c000 0x0 0x4000>;
 487                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 488                                 clock-names = "se";
 489                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 490                                 pinctrl-0 = <&qup_i2c3_data_clk>;
 491                                 pinctrl-names = "default";
 492                                 #address-cells = <1>;
 493                                 #size-cells = <0>;
 494                                 status = "disabled";
 495                         };
 496
 497                         spi3: spi@98c000 {
 498                                 compatible = "qcom,geni-spi";
 499                                 reg = <0x0 0x98c000 0x0 0x4000>;
 500                                 #address-cells = <1>;
 501                                 #size-cells = <0>;
 502                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 503                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 504                                 clock-names = "se";
 505                                 pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
 506                                 pinctrl-names = "default";
 507                                 status = "disabled";
 508                         };
 509
 510                         i2c4: i2c@990000 {
 511                                 compatible = "qcom,geni-i2c";
 512                                 reg = <0x0 0x990000 0x0 0x4000>;
 513                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 514                                 clock-names = "se";
 515                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 516                                 pinctrl-0 = <&qup_i2c4_data_clk>;
 517                                 pinctrl-names = "default";
 518                                 #address-cells = <1>;
 519                                 #size-cells = <0>;
 520                                 status = "disabled";
 521                         };
 522
 523                         spi4: spi@990000 {
 524                                 compatible = "qcom,geni-spi";
 525                                 reg = <0x0 0x990000 0x0 0x4000>;
 526                                 #address-cells = <1>;
 527                                 #size-cells = <0>;
 528                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 529                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 530                                 clock-names = "se";
 531                                 pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
 532                                 pinctrl-names = "default";
 533                                 status = "disabled";
 534                         };
 535
 536                         i2c5: i2c@994000 {
 537                                 compatible = "qcom,geni-i2c";
 538                                 reg = <0x0 0x994000 0x0 0x4000>;
 539                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 540                                 clock-names = "se";
 541                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 542                                 pinctrl-0 = <&qup_i2c5_data_clk>;
 543                                 pinctrl-names = "default";
 544                                 #address-cells = <1>;
 545                                 #size-cells = <0>;
 546                                 status = "disabled";
 547                         };
 548
 549                         spi5: spi@994000 {
 550                                 compatible = "qcom,geni-spi";
 551                                 reg = <0x0 0x994000 0x0 0x4000>;
 552                                 #address-cells = <1>;
 553                                 #size-cells = <0>;
 554                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 555                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 556                                 clock-names = "se";
 557                                 pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
 558                                 pinctrl-names = "default";
 559                                 status = "disabled";
 560                         };
 561
 562                         i2c6: i2c@998000 {
 563                                 compatible = "qcom,geni-i2c";
 564                                 reg = <0x0 0x998000 0x0 0x4000>;
 565                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 566                                 clock-names = "se";
 567                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 568                                 pinctrl-0 = <&qup_i2c6_data_clk>;
 569                                 pinctrl-names = "default";
 570                                 #address-cells = <1>;
 571                                 #size-cells = <0>;
 572                                 status = "disabled";
 573                         };
 574
 575                         spi6: spi@998000 {
 576                                 compatible = "qcom,geni-spi";
 577                                 reg = <0x0 0x998000 0x0 0x4000>;
 578                                 #address-cells = <1>;
 579                                 #size-cells = <0>;
 580                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 581                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 582                                 clock-names = "se";
 583                                 pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
 584                                 pinctrl-names = "default";
 585                                 status = "disabled";
 586                         };
 587
 588                         uart7: serial@99c000 {
 589                                 compatible = "qcom,geni-debug-uart";
 590                                 reg = <0x0 0x99c000 0x0 0x4000>;
 591                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
 592                                 clock-names = "se";
 593                                 pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 594                                 pinctrl-names = "default";
 595                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 596                                 status = "disabled";
 597                         };
 598                 };
 599
 600                 gpi_dma1: dma-controller@a00000  {
 601                         compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 602                         reg = <0x0 0xa00000 0x0 0x60000>;
 603                         interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 604                                      <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
 605                                      <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 606                                      <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 607                                      <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
 608                                      <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
 609                                      <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
 610                                      <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
 611                                      <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
 612                                      <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
 613                                      <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
 614                                      <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
 615                         dma-channels = <12>;
 616                         dma-channel-mask = <0x3f>;
 617                         iommus = <&apps_smmu 0x116 0x0>;
 618                         #dma-cells = <3>;
 619                 };
 620
 621                 qupv3_id_1: geniqup@ac0000 {
 622                         compatible = "qcom,geni-se-qup";
 623                         reg = <0x0 0xac0000 0x0 0x2000>;
 624                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 625                                 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 626                         clock-names = "m-ahb", "s-ahb";
 627                         iommus = <&apps_smmu 0x103 0x0>;
 628                         #address-cells = <2>;
 629                         #size-cells = <2>;
 630                         ranges;
 631                         status = "disabled";
 632
 633                         uart8: serial@a80000 {
 634                                 compatible = "qcom,geni-uart";
 635                                 reg = <0x0 0xa80000 0x0 0x4000>;
 636                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 637                                 clock-names = "se";
 638                                 pinctrl-0 = <&qup_uart8_default>;
 639                                 pinctrl-names = "default";
 640                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 641                                 #address-cells = <1>;
 642                                 #size-cells = <0>;
 643                                 status = "disabled";
 644                         };
 645
 646                         i2c9: i2c@a84000 {
 647                                 compatible = "qcom,geni-i2c";
 648                                 reg = <0x0 0xa84000 0x0 0x4000>;
 649                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 650                                 clock-names = "se";
 651                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 652                                 pinctrl-0 = <&qup_i2c9_data_clk>;
 653                                 pinctrl-names = "default";
 654                                 #address-cells = <1>;
 655                                 #size-cells = <0>;
 656                                 status = "disabled";
 657                         };
 658
 659                         spi9: spi@a84000 {
 660                                 compatible = "qcom,geni-spi";
 661                                 reg = <0x0 0xa84000 0x0 0x4000>;
 662                                 #address-cells = <1>;
 663                                 #size-cells = <0>;
 664                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 665                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 666                                 clock-names = "se";
 667                                 pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
 668                                 pinctrl-names = "default";
 669                                 status = "disabled";
 670                         };
 671
 672                         i2c10: i2c@a88000 {
 673                                 compatible = "qcom,geni-i2c";
 674                                 reg = <0x0 0xa88000 0x0 0x4000>;
 675                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 676                                 clock-names = "se";
 677                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 678                                 pinctrl-0 = <&qup_i2c10_data_clk>;
 679                                 pinctrl-names = "default";
 680                                 #address-cells = <1>;
 681                                 #size-cells = <0>;
 682                                 status = "disabled";
 683                         };
 684
 685                         spi10: spi@a88000 {
 686                                 compatible = "qcom,geni-spi";
 687                                 reg = <0x0 0xa88000 0x0 0x4000>;
 688                                 #address-cells = <1>;
 689                                 #size-cells = <0>;
 690                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 691                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 692                                 clock-names = "se";
 693                                 pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
 694                                 pinctrl-names = "default";
 695                                 status = "disabled";
 696                         };
 697
 698                         i2c11: i2c@a8c000 {
 699                                 compatible = "qcom,geni-i2c";
 700                                 reg = <0x0 0xa8c000 0x0 0x4000>;
 701                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 702                                 clock-names = "se";
 703                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 704                                 pinctrl-0 = <&qup_i2c11_data_clk>;
 705                                 pinctrl-names = "default";
 706                                 #address-cells = <1>;
 707                                 #size-cells = <0>;
 708                                 status = "disabled";
 709                         };
 710
 711                         spi11: spi@a8c000 {
 712                                 compatible = "qcom,geni-spi";
 713                                 reg = <0x0 0xa8c000 0x0 0x4000>;
 714                                 #address-cells = <1>;
 715                                 #size-cells = <0>;
 716                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 717                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 718                                 clock-names = "se";
 719                                 pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
 720                                 pinctrl-names = "default";
 721                                 status = "disabled";
 722                         };
 723
 724                         i2c12: i2c@a90000 {
 725                                 compatible = "qcom,geni-i2c";
 726                                 reg = <0x0 0xa90000 0x0 0x4000>;
 727                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 728                                 clock-names = "se";
 729                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 730                                 pinctrl-0 = <&qup_i2c12_data_clk>;
 731                                 pinctrl-names = "default";
 732                                 #address-cells = <1>;
 733                                 #size-cells = <0>;
 734                                 status = "disabled";
 735                         };
 736
 737                         spi12: spi@a90000 {
 738                                 compatible = "qcom,geni-spi";
 739                                 reg = <0x0 0xa90000 0x0 0x4000>;
 740                                 #address-cells = <1>;
 741                                 #size-cells = <0>;
 742                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 743                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 744                                 clock-names = "se";
 745                                 pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
 746                                 pinctrl-names = "default";
 747                                 status = "disabled";
 748                         };
 749
 750                         i2c13: i2c@a94000 {
 751                                 compatible = "qcom,geni-i2c";
 752                                 reg = <0x0 0xa94000 0x0 0x4000>;
 753                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 754                                 clock-names = "se";
 755                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 756                                 pinctrl-0 = <&qup_i2c13_data_clk>;
 757                                 pinctrl-names = "default";
 758                                 #address-cells = <1>;
 759                                 #size-cells = <0>;
 760                                 status = "disabled";
 761                         };
 762
 763                         uart13: serial@a94000 {
 764                                 compatible = "qcom,geni-uart";
 765                                 reg = <0x0 0xa94000 0x0 0x4000>;
 766                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 767                                 clock-names = "se";
 768                                 pinctrl-0 = <&qup_uart13_default>;
 769                                 pinctrl-names = "default";
 770                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 771                                 #address-cells = <1>;
 772                                 #size-cells = <0>;
 773                                 status = "disabled";
 774                         };
 775
 776                         spi13: spi@a94000 {
 777                                 compatible = "qcom,geni-spi";
 778                                 reg = <0x0 0xa94000 0x0 0x4000>;
 779                                 #address-cells = <1>;
 780                                 #size-cells = <0>;
 781                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 782                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 783                                 clock-names = "se";
 784                                 pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
 785                                 pinctrl-names = "default";
 786                                 status = "disabled";
 787                         };
 788
 789                         i2c14: i2c@a98000 {
 790                                 compatible = "qcom,geni-i2c";
 791                                 reg = <0x0 0xa98000 0x0 0x4000>;
 792                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 793                                 clock-names = "se";
 794                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
 795                                 pinctrl-0 = <&qup_i2c14_data_clk>;
 796                                 pinctrl-names = "default";
 797                                 #address-cells = <1>;
 798                                 #size-cells = <0>;
 799                                 status = "disabled";
 800                         };
 801
 802                         spi14: spi@a98000 {
 803                                 compatible = "qcom,geni-spi";
 804                                 reg = <0x0 0xa98000 0x0 0x4000>;
 805                                 #address-cells = <1>;
 806                                 #size-cells = <0>;
 807                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
 808                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 809                                 clock-names = "se";
 810                                 pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
 811                                 pinctrl-names = "default";
 812                                 status = "disabled";
 813                         };
 814
 815                         i2c15: i2c@a9c000 {
 816                                 compatible = "qcom,geni-i2c";
 817                                 reg = <0x0 0xa9c000 0x0 0x4000>;
 818                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 819                                 clock-names = "se";
 820                                 interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
 821                                 pinctrl-0 = <&qup_i2c15_data_clk>;
 822                                 pinctrl-names = "default";
 823                                 #address-cells = <1>;
 824                                 #size-cells = <0>;
 825                                 status = "disabled";
 826                         };
 827
 828                         spi15: spi@a9c000 {
 829                                 compatible = "qcom,geni-spi";
 830                                 reg = <0x0 0xa9c000 0x0 0x4000>;
 831                                 #address-cells = <1>;
 832                                 #size-cells = <0>;
 833                                 interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
 834                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 835                                 clock-names = "se";
 836                                 pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
 837                                 pinctrl-names = "default";
 838                                 status = "disabled";
 839                         };
 840                 };
 841
 842                 system_noc: interconnect@1640000 {
 843                         compatible = "qcom,qdu1000-system-noc";
 844                         reg = <0x0 0x1640000 0x0 0x45080>;
 845                         qcom,bcm-voters = <&apps_bcm_voter>;
 846                         #interconnect-cells = <2>;
 847                 };
 848
 849                 tcsr_mutex: hwlock@1f40000 {
 850                         compatible = "qcom,tcsr-mutex";
 851                         reg = <0x0 0x1f40000 0x0 0x20000>;
 852                         #hwlock-cells = <1>;
 853                 };
 854
 855                 pdc: interrupt-controller@b220000 {
 856                         compatible = "qcom,qdu1000-pdc", "qcom,pdc";
 857                         reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
 858                         qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
 859                                           <94 609 31>, <125 63 1>;
 860                         #interrupt-cells = <2>;
 861                         interrupt-parent = <&intc>;
 862                         interrupt-controller;
 863                 };
 864
 865                 spmi_bus: spmi@c400000 {
 866                         compatible = "qcom,spmi-pmic-arb";
 867                         reg = <0x0 0xc400000 0x0 0x3000>,
 868                               <0x0 0xc500000 0x0 0x400000>,
 869                               <0x0 0xc440000 0x0 0x80000>,
 870                               <0x0 0xc4c0000 0x0 0x10000>,
 871                               <0x0 0xc42d000 0x0 0x4000>;
 872                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 873                         interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 874                         interrupt-names = "periph_irq";
 875                         qcom,ee = <0>;
 876                         qcom,channel = <0>;
 877                         #address-cells = <2>;
 878                         #size-cells = <0>;
 879                         interrupt-controller;
 880                         #interrupt-cells = <4>;
 881                 };
 882
 883                 tlmm: pinctrl@f000000 {
 884                         compatible = "qcom,qdu1000-tlmm";
 885                         reg = <0x0 0xf000000 0x0 0x1000000>;
 886                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 887                         gpio-controller;
 888                         #gpio-cells = <2>;
 889                         interrupt-controller;
 890                         #interrupt-cells = <2>;
 891                         gpio-ranges = <&tlmm 0 0 151>;
 892                         wakeup-parent = <&pdc>;
 893
 894                         qup_uart0_default: qup-uart0-default-state {
 895                                 pins = "gpio6", "gpio7", "gpio8", "gpio9";
 896                                 function = "qup00";
 897                         };
 898
 899                         qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 900                                 pins = "gpio10", "gpio11";
 901                                 function = "qup01";
 902                         };
 903
 904                         qup_spi1_data_clk: qup-spi1-data-clk-state {
 905                                 pins = "gpio10", "gpio11", "gpio12";
 906                                 function = "qup01";
 907                         };
 908
 909                         qup_spi1_cs: qup-spi1-cs-state {
 910                                 pins = "gpio13";
 911                                 function = "gpio";
 912                         };
 913
 914                         qup_i2c2_data_clk: qup-i2c2-data-clk-state {
 915                                 pins = "gpio12", "gpio13";
 916                                 function = "qup02";
 917                         };
 918
 919                         qup_spi2_data_clk: qup-spi2-data-clk-state {
 920                                 pins = "gpio12", "gpio13", "gpio10";
 921                                 function = "qup02";
 922                         };
 923
 924                         qup_spi2_cs: qup-spi2-cs-state {
 925                                 pins = "gpio11";
 926                                 function = "gpio";
 927                         };
 928
 929                         qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 930                                 pins = "gpio14", "gpio15";
 931                                 function = "qup03";
 932                         };
 933
 934                         qup_spi3_data_clk: qup-spi3-data-clk-state {
 935                                 pins = "gpio14", "gpio15", "gpio16";
 936                                 function = "qup03";
 937                         };
 938
 939                         qup_spi3_cs: qup-spi3-cs-state {
 940                                 pins = "gpio17";
 941                                 function = "gpio";
 942                         };
 943
 944                         qup_i2c4_data_clk: qup-i2c4-data-clk-state {
 945                                 pins = "gpio16", "gpio17";
 946                                 function = "qup04";
 947                         };
 948
 949                         qup_spi4_data_clk: qup-spi4-data-clk-state {
 950                                 pins = "gpio16", "gpio17", "gpio14";
 951                                 function = "qup04";
 952                         };
 953
 954                         qup_spi4_cs: qup-spi4-cs-state {
 955                                 pins = "gpio15";
 956                                 function = "gpio";
 957                         };
 958
 959                         qup_i2c5_data_clk: qup-i2c5-data-clk-state {
 960                                 pins = "gpio130", "gpio131";
 961                                 function = "qup05";
 962                         };
 963
 964                         qup_spi5_data_clk: qup-spi5-data-clk-state {
 965                                 pins = "gpio130", "gpio131", "gpio132";
 966                                 function = "qup05";
 967                         };
 968
 969                         qup_spi5_cs: qup-spi5-cs-state {
 970                                 pins = "gpio133";
 971                                 function = "gpio";
 972                         };
 973
 974                         qup_i2c6_data_clk: qup-i2c6-data-clk-state {
 975                                 pins = "gpio132", "gpio133";
 976                                 function = "qup06";
 977                         };
 978
 979                         qup_spi6_data_clk: qup-spi6-data-clk-state {
 980                                 pins = "gpio132", "gpio133", "gpio130";
 981                                 function = "qup06";
 982                         };
 983
 984                         qup_spi6_cs: qup-spi6-cs-state {
 985                                 pins = "gpio131";
 986                                 function = "gpio";
 987                         };
 988
 989                         qup_uart7_rx: qup-uart7-rx-state {
 990                                 pins = "gpio135";
 991                                 function = "qup07";
 992                         };
 993
 994                         qup_uart7_tx: qup-uart7-tx-state  {
 995                                 pins = "gpio134";
 996                                 function = "qup07";
 997                         };
 998
 999                         qup_uart8_default: qup-uart8-default-state {
1000                                 pins = "gpio18", "gpio19", "gpio20", "gpio21";
1001                                 function = "qup10";
1002                         };
1003
1004                         qup_i2c9_data_clk: qup-i2c9-data-clk-state {
1005                                 pins = "gpio22", "gpio23";
1006                                 function = "qup11";
1007                         };
1008
1009                         qup_spi9_data_clk: qup-spi9-data-clk-state {
1010                                 pins = "gpio22", "gpio23", "gpio24";
1011                                 function = "qup11";
1012                         };
1013
1014                         qup_spi9_cs: qup-spi9-cs-state {
1015                                 pins = "gpio25";
1016                                 function = "gpio";
1017                         };
1018
1019                         qup_i2c10_data_clk: qup-i2c10-data-clk-state {
1020                                 pins = "gpio24", "gpio25";
1021                                 function = "qup12";
1022                         };
1023
1024                         qup_spi10_data_clk: qup-spi10-data-clk-state {
1025                                 pins = "gpio24", "gpio25", "gpio22";
1026                                 function = "qup12";
1027                         };
1028
1029                         qup_spi10_cs: qup-spi10-cs-state {
1030                                 pins = "gpio23";
1031                                 function = "gpio";
1032                         };
1033
1034                         qup_i2c11_data_clk: qup-i2c11-data-clk-state {
1035                                 pins = "gpio26", "gpio27";
1036                                 function = "qup13";
1037                         };
1038
1039                         qup_spi11_data_clk: qup-spi11-data-clk-state {
1040                                 pins = "gpio26", "gpio27", "gpio28";
1041                                 function = "qup13";
1042                         };
1043
1044                         qup_spi11_cs: qup-spi11-cs-state {
1045                                 pins = "gpio29";
1046                                 function = "gpio";
1047                         };
1048
1049                         qup_i2c12_data_clk: qup-i2c12-data-clk-state {
1050                                 pins = "gpio28", "gpio29";
1051                                 function = "qup14";
1052                         };
1053
1054                         qup_spi12_data_clk: qup-spi12-data-clk-state {
1055                                 pins = "gpio28", "gpio29", "gpio26";
1056                                 function = "qup14";
1057                         };
1058
1059                         qup_spi12_cs: qup-spi12-cs-state {
1060                                 pins = "gpio27";
1061                                 function = "gpio";
1062                         };
1063
1064                         qup_i2c13_data_clk: qup-i2c13-data-clk-state {
1065                                 pins = "gpio30", "gpio31";
1066                                 function = "qup15";
1067                         };
1068
1069                         qup_spi13_data_clk: qup-spi13-data-clk-state {
1070                                 pins = "gpio30", "gpio31", "gpio32";
1071                                 function = "qup15";
1072                         };
1073
1074                         qup_spi13_cs: qup-spi13-cs-state {
1075                                 pins = "gpio33";
1076                                 function = "gpio";
1077                         };
1078
1079                         qup_uart13_default: qup-uart13-default-state {
1080                                 pins = "gpio30", "gpio31", "gpio32", "gpio33";
1081                                 function = "qup15";
1082                         };
1083
1084                         qup_i2c14_data_clk: qup-i2c14-data-clk-state {
1085                                 pins = "gpio34", "gpio35";
1086                                 function = "qup16";
1087                         };
1088
1089                         qup_spi14_data_clk: qup-spi14-data-clk-state {
1090                                 pins = "gpio34", "gpio35", "gpio36";
1091                                 function = "qup16";
1092                         };
1093
1094                         qup_spi14_cs: qup-spi14-cs-state {
1095                                 pins = "gpio37", "gpio38";
1096                                 function = "gpio";
1097                         };
1098
1099                         qup_i2c15_data_clk: qup-i2c15-data-clk-state {
1100                                 pins = "gpio40", "gpio41";
1101                                 function = "qup17";
1102                         };
1103
1104                         qup_spi15_data_clk: qup-spi15-data-clk-state {
1105                                 pins = "gpio40", "gpio41", "gpio30";
1106                                 function = "qup17";
1107                         };
1108
1109                         qup_spi15_cs: qup-spi15-cs-state {
1110                                 pins = "gpio31";
1111                                 function = "gpio";
1112                         };
1113                 };
1114
1115                 apps_smmu: iommu@15000000 {
1116                         compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500";
1117                         reg = <0x0 0x15000000 0x0 0x100000>;
1118                         #iommu-cells = <2>;
1119                         #global-interrupts = <2>;
1120                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
1121                                      <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
1122                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1123                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
1124                                      <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1125                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1126                                      <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
1127                                      <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
1128                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1129                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1130                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1131                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1132                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1133                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1134                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1135                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1136                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1137                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1138                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1139                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1140                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1141                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1142                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1143                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1144                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1145                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1146                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1147                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1148                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1149                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1150                                      <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
1151                                      <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
1152                                      <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
1153                                      <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
1154                                      <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
1155                                      <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
1156                                      <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
1157                                      <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
1158                                      <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
1159                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
1160                                      <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
1161                                      <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
1162                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
1163                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
1164                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
1165                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
1166                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
1167                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
1168                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
1169                 };
1170
1171                 intc: interrupt-controller@17200000 {
1172                         compatible = "arm,gic-v3";
1173                         reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
1174                               <0x0 0x17260000 0x0 0x80000>;     /* GICR * 4 */
1175                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
1176                         #interrupt-cells = <3>;
1177                         interrupt-controller;
1178                         #redistributor-regions = <1>;
1179                         redistributor-stride = <0x0 0x20000>;
1180                 };
1181
1182                 timer@17420000 {
1183                         compatible = "arm,armv7-timer-mem";
1184                         reg = <0x0 0x17420000 0x0 0x1000>;
1185                         #address-cells = <1>;
1186                         #size-cells = <1>;
1187                         ranges = <0x0 0x0 0x0 0x20000000>;
1188
1189                         frame@17421000 {
1190                                 reg = <0x17421000 0x1000>,
1191                                       <0x17422000 0x1000>;
1192                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1193                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1194                                 frame-number = <0>;
1195                         };
1196
1197                         frame@17423000 {
1198                                 reg = <0x17423000 0x1000>;
1199                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1200                                 frame-number = <1>;
1201                                 status = "disabled";
1202                         };
1203
1204                         frame@17425000 {
1205                                 reg = <0x17425000 0x1000>,
1206                                       <0x17426000 0x1000>;
1207                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1208                                 frame-number = <2>;
1209                                 status = "disabled";
1210                         };
1211
1212                         frame@17427000 {
1213                                 reg = <0x17427000 0x1000>;
1214                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1215                                 frame-number = <3>;
1216                                 status = "disabled";
1217                         };
1218
1219                         frame@17429000 {
1220                                 reg = <0x17429000 0x1000>;
1221                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1222                                 frame-number = <4>;
1223                                 status = "disabled";
1224                         };
1225
1226                         frame@1742b000 {
1227                                 reg = <0x1742b000 0x1000>;
1228                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1229                                 frame-number = <5>;
1230                                 status = "disabled";
1231                         };
1232
1233                         frame@1742d000 {
1234                                 reg = <0x1742d000 0x1000>;
1235                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1236                                 frame-number = <6>;
1237                                 status = "disabled";
1238                         };
1239                 };
1240
1241                 apps_rsc: rsc@17a00000 {
1242                         compatible = "qcom,rpmh-rsc";
1243                         reg = <0x0 0x17a00000 0x0 0x10000>,
1244                               <0x0 0x17a10000 0x0 0x10000>,
1245                               <0x0 0x17a20000 0x0 0x10000>;
1246                         reg-names = "drv-0", "drv-1", "drv-2";
1247                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
1248                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
1249                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
1250                         qcom,tcs-offset = <0xd00>;
1251                         qcom,drv-id = <2>;
1252                         qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
1253                                           <WAKE_TCS      3>, <CONTROL_TCS   0>;
1254                         label = "apps_rsc";
1255
1256                         apps_bcm_voter: bcm-voter {
1257                                 compatible = "qcom,bcm-voter";
1258                         };
1259
1260                         rpmhcc: clock-controller {
1261                                 compatible = "qcom,qdu1000-rpmh-clk";
1262                                 clocks = <&xo_board>;
1263                                 clock-names = "xo";
1264                                 #clock-cells = <1>;
1265                         };
1266
1267                         rpmhpd: power-controller {
1268                                 compatible = "qcom,qdu1000-rpmhpd";
1269                                 #power-domain-cells = <1>;
1270                                 operating-points-v2 = <&rpmhpd_opp_table>;
1271
1272                                 rpmhpd_opp_table: opp-table {
1273                                         compatible = "operating-points-v2";
1274
1275                                         rpmhpd_opp_ret: opp1 {
1276                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
1277                                         };
1278
1279                                         rpmhpd_opp_min_svs: opp2 {
1280                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
1281                                         };
1282
1283                                         rpmhpd_opp_low_svs: opp3 {
1284                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
1285                                         };
1286
1287                                         rpmhpd_opp_svs: opp4 {
1288                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
1289                                         };
1290
1291                                         rpmhpd_opp_svs_l1: opp5 {
1292                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
1293                                         };
1294
1295                                         rpmhpd_opp_nom: opp6 {
1296                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
1297                                         };
1298
1299                                         rpmhpd_opp_nom_l1: opp7 {
1300                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
1301                                         };
1302
1303                                         rpmhpd_opp_nom_l2: opp8 {
1304                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
1305                                         };
1306
1307                                         rpmhpd_opp_turbo: opp9 {
1308                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
1309                                         };
1310
1311                                         rpmhpd_opp_turbo_l1: opp10 {
1312                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
1313                                         };
1314                                 };
1315                         };
1316                 };
1317
1318                 cpufreq_hw: cpufreq@17d90000 {
1319                         compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss";
1320                         reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>;
1321                         reg-names = "freq-domain0", "freq-domain1";
1322                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
1323                         clock-names = "xo", "alternate";
1324                         #freq-domain-cells = <1>;
1325                         #clock-cells = <1>;
1326                 };
1327
1328                 gem_noc: interconnect@19100000 {
1329                         compatible = "qcom,qdu1000-gem-noc";
1330                         reg = <0x0 0x19100000 0x0 0xB8080>;
1331                         qcom,bcm-voters = <&apps_bcm_voter>;
1332                         #interconnect-cells = <2>;
1333                 };
1334
1335                 system-cache-controller@19200000 {
1336                         compatible = "qcom,qdu1000-llcc";
1337                         reg = <0 0x19200000 0 0xd80000>,
1338                               <0 0x1a200000 0 0x80000>,
1339                               <0 0x221c8128 0 0x4>;
1340                         reg-names = "llcc_base",
1341                                     "llcc_broadcast_base",
1342                                     "multi_channel_register";
1343                         interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
1344                         multi-ch-bit-off = <24 2>;
1345                 };
1346         };
1347
1348         timer {
1349                 compatible = "arm,armv8-timer";
1350                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1351                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1352                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1353                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1354                              <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
1355         };
1356 };