arch/arm/boot/dts/sama5d2.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
   4  *
   5  *  Copyright (C) 2015 Atmel,
   6  *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
   7  */
   8
   9 #include <dt-bindings/dma/at91.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11 #include <dt-bindings/clock/at91.h>
  12 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
  13
  14 / {
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17         model = "Atmel SAMA5D2 family SoC";
  18         compatible = "atmel,sama5d2";
  19         interrupt-parent = <&aic>;
  20
  21         aliases {
  22                 serial0 = &uart1;
  23                 serial1 = &uart3;
  24                 tcb0 = &tcb0;
  25                 tcb1 = &tcb1;
  26                 i2s0 = &i2s0;
  27                 i2s1 = &i2s1;
  28         };
  29
  30         cpus {
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33
  34                 cpu@0 {
  35                         device_type = "cpu";
  36                         compatible = "arm,cortex-a5";
  37                         reg = <0>;
  38                         next-level-cache = <&L2>;
  39                 };
  40         };
  41
  42         pmu {
  43                 compatible = "arm,cortex-a5-pmu";
  44                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
  45         };
  46
  47         etb {
  48                 compatible = "arm,coresight-etb10", "arm,primecell";
  49                 reg = <0x740000 0x1000>;
  50
  51                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
  52                 clock-names = "apb_pclk";
  53
  54                 in-ports {
  55                         port {
  56                                 etb_in: endpoint {
  57                                         remote-endpoint = <&etm_out>;
  58                                 };
  59                         };
  60                 };
  61         };
  62
  63         etm {
  64                 compatible = "arm,coresight-etm3x", "arm,primecell";
  65                 reg = <0x73C000 0x1000>;
  66
  67                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
  68                 clock-names = "apb_pclk";
  69
  70                 out-ports {
  71                         port {
  72                                 etm_out: endpoint {
  73                                         remote-endpoint = <&etb_in>;
  74                                 };
  75                         };
  76                 };
  77         };
  78
  79         memory {
  80                 device_type = "memory";
  81                 reg = <0x20000000 0x20000000>;
  82         };
  83
  84         clocks {
  85                 slow_xtal: slow_xtal {
  86                         compatible = "fixed-clock";
  87                         #clock-cells = <0>;
  88                         clock-frequency = <0>;
  89                 };
  90
  91                 main_xtal: main_xtal {
  92                         compatible = "fixed-clock";
  93                         #clock-cells = <0>;
  94                         clock-frequency = <0>;
  95                 };
  96         };
  97
  98         ns_sram: sram@200000 {
  99                 compatible = "mmio-sram";
 100                 reg = <0x00200000 0x20000>;
 101         };
 102
 103         ahb {
 104                 compatible = "simple-bus";
 105                 #address-cells = <1>;
 106                 #size-cells = <1>;
 107                 ranges;
 108
 109                 nfc_sram: sram@100000 {
 110                         compatible = "mmio-sram";
 111                         no-memory-wc;
 112                         reg = <0x00100000 0x2400>;
 113                 };
 114
 115                 usb0: gadget@300000 {
 116                         #address-cells = <1>;
 117                         #size-cells = <0>;
 118                         compatible = "atmel,sama5d3-udc";
 119                         reg = <0x00300000 0x100000
 120                                0xfc02c000 0x400>;
 121                         interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
 122                         clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 123                         clock-names = "pclk", "hclk";
 124                         status = "disabled";
 125
 126                         ep@0 {
 127                                 reg = <0>;
 128                                 atmel,fifo-size = <64>;
 129                                 atmel,nb-banks = <1>;
 130                         };
 131
 132                         ep@1 {
 133                                 reg = <1>;
 134                                 atmel,fifo-size = <1024>;
 135                                 atmel,nb-banks = <3>;
 136                                 atmel,can-dma;
 137                                 atmel,can-isoc;
 138                         };
 139
 140                         ep@2 {
 141                                 reg = <2>;
 142                                 atmel,fifo-size = <1024>;
 143                                 atmel,nb-banks = <3>;
 144                                 atmel,can-dma;
 145                                 atmel,can-isoc;
 146                         };
 147
 148                         ep@3 {
 149                                 reg = <3>;
 150                                 atmel,fifo-size = <1024>;
 151                                 atmel,nb-banks = <2>;
 152                                 atmel,can-dma;
 153                                 atmel,can-isoc;
 154                         };
 155
 156                         ep@4 {
 157                                 reg = <4>;
 158                                 atmel,fifo-size = <1024>;
 159                                 atmel,nb-banks = <2>;
 160                                 atmel,can-dma;
 161                                 atmel,can-isoc;
 162                         };
 163
 164                         ep@5 {
 165                                 reg = <5>;
 166                                 atmel,fifo-size = <1024>;
 167                                 atmel,nb-banks = <2>;
 168                                 atmel,can-dma;
 169                                 atmel,can-isoc;
 170                         };
 171
 172                         ep@6 {
 173                                 reg = <6>;
 174                                 atmel,fifo-size = <1024>;
 175                                 atmel,nb-banks = <2>;
 176                                 atmel,can-dma;
 177                                 atmel,can-isoc;
 178                         };
 179
 180                         ep@7 {
 181                                 reg = <7>;
 182                                 atmel,fifo-size = <1024>;
 183                                 atmel,nb-banks = <2>;
 184                                 atmel,can-dma;
 185                                 atmel,can-isoc;
 186                         };
 187
 188                         ep@8 {
 189                                 reg = <8>;
 190                                 atmel,fifo-size = <1024>;
 191                                 atmel,nb-banks = <2>;
 192                                 atmel,can-isoc;
 193                         };
 194
 195                         ep@9 {
 196                                 reg = <9>;
 197                                 atmel,fifo-size = <1024>;
 198                                 atmel,nb-banks = <2>;
 199                                 atmel,can-isoc;
 200                         };
 201
 202                         ep@10 {
 203                                 reg = <10>;
 204                                 atmel,fifo-size = <1024>;
 205                                 atmel,nb-banks = <2>;
 206                                 atmel,can-isoc;
 207                         };
 208
 209                         ep@11 {
 210                                 reg = <11>;
 211                                 atmel,fifo-size = <1024>;
 212                                 atmel,nb-banks = <2>;
 213                                 atmel,can-isoc;
 214                         };
 215
 216                         ep@12 {
 217                                 reg = <12>;
 218                                 atmel,fifo-size = <1024>;
 219                                 atmel,nb-banks = <2>;
 220                                 atmel,can-isoc;
 221                         };
 222
 223                         ep@13 {
 224                                 reg = <13>;
 225                                 atmel,fifo-size = <1024>;
 226                                 atmel,nb-banks = <2>;
 227                                 atmel,can-isoc;
 228                         };
 229
 230                         ep@14 {
 231                                 reg = <14>;
 232                                 atmel,fifo-size = <1024>;
 233                                 atmel,nb-banks = <2>;
 234                                 atmel,can-isoc;
 235                         };
 236
 237                         ep@15 {
 238                                 reg = <15>;
 239                                 atmel,fifo-size = <1024>;
 240                                 atmel,nb-banks = <2>;
 241                                 atmel,can-isoc;
 242                         };
 243                 };
 244
 245                 usb1: ohci@400000 {
 246                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 247                         reg = <0x00400000 0x100000>;
 248                         interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 249                         clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
 250                         clock-names = "ohci_clk", "hclk", "uhpck";
 251                         status = "disabled";
 252                 };
 253
 254                 usb2: ehci@500000 {
 255                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 256                         reg = <0x00500000 0x100000>;
 257                         interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 258                         clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
 259                         clock-names = "usb_clk", "ehci_clk";
 260                         status = "disabled";
 261                 };
 262
 263                 L2: cache-controller@a00000 {
 264                         compatible = "arm,pl310-cache";
 265                         reg = <0x00a00000 0x1000>;
 266                         interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
 267                         cache-unified;
 268                         cache-level = <2>;
 269                 };
 270
 271                 ebi: ebi@10000000 {
 272                         compatible = "atmel,sama5d3-ebi";
 273                         #address-cells = <2>;
 274                         #size-cells = <1>;
 275                         atmel,smc = <&hsmc>;
 276                         reg = <0x10000000 0x10000000
 277                                0x60000000 0x30000000>;
 278                         ranges = <0x0 0x0 0x10000000 0x10000000
 279                                   0x1 0x0 0x60000000 0x10000000
 280                                   0x2 0x0 0x70000000 0x10000000
 281                                   0x3 0x0 0x80000000 0x10000000>;
 282                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
 283                         status = "disabled";
 284
 285                         nand_controller: nand-controller {
 286                                 compatible = "atmel,sama5d3-nand-controller";
 287                                 atmel,nfc-sram = <&nfc_sram>;
 288                                 atmel,nfc-io = <&nfc_io>;
 289                                 ecc-engine = <&pmecc>;
 290                                 #address-cells = <2>;
 291                                 #size-cells = <1>;
 292                                 ranges;
 293                                 status = "disabled";
 294                         };
 295                 };
 296
 297                 sdmmc0: sdio-host@a0000000 {
 298                         compatible = "atmel,sama5d2-sdhci";
 299                         reg = <0xa0000000 0x300>;
 300                         interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 301                         clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
 302                         clock-names = "hclock", "multclk", "baseclk";
 303                         status = "disabled";
 304                 };
 305
 306                 sdmmc1: sdio-host@b0000000 {
 307                         compatible = "atmel,sama5d2-sdhci";
 308                         reg = <0xb0000000 0x300>;
 309                         interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
 310                         clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
 311                         clock-names = "hclock", "multclk", "baseclk";
 312                         status = "disabled";
 313                 };
 314
 315                 nfc_io: nfc-io@c0000000 {
 316                         compatible = "atmel,sama5d3-nfc-io", "syscon";
 317                         reg = <0xc0000000 0x8000000>;
 318                 };
 319
 320                 apb {
 321                         compatible = "simple-bus";
 322                         #address-cells = <1>;
 323                         #size-cells = <1>;
 324                         ranges;
 325
 326                         hlcdc: hlcdc@f0000000 {
 327                                 compatible = "atmel,sama5d2-hlcdc";
 328                                 reg = <0xf0000000 0x2000>;
 329                                 interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
 330                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
 331                                 clock-names = "periph_clk","sys_clk", "slow_clk";
 332                                 status = "disabled";
 333
 334                                 hlcdc-display-controller {
 335                                         compatible = "atmel,hlcdc-display-controller";
 336                                         #address-cells = <1>;
 337                                         #size-cells = <0>;
 338
 339                                         port@0 {
 340                                                 #address-cells = <1>;
 341                                                 #size-cells = <0>;
 342                                                 reg = <0>;
 343                                         };
 344                                 };
 345
 346                                 hlcdc_pwm: hlcdc-pwm {
 347                                         compatible = "atmel,hlcdc-pwm";
 348                                         #pwm-cells = <3>;
 349                                 };
 350                         };
 351
 352                         isc: isc@f0008000 {
 353                                 compatible = "atmel,sama5d2-isc";
 354                                 reg = <0xf0008000 0x4000>;
 355                                 interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
 356                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
 357                                 clock-names = "hclock", "iscck", "gck";
 358                                 #clock-cells = <0>;
 359                                 clock-output-names = "isc-mck";
 360                                 status = "disabled";
 361                         };
 362
 363                         ramc0: ramc@f000c000 {
 364                                 compatible = "atmel,sama5d3-ddramc";
 365                                 reg = <0xf000c000 0x200>;
 366                                 clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
 367                                 clock-names = "ddrck", "mpddr";
 368                         };
 369
 370                         dma0: dma-controller@f0010000 {
 371                                 compatible = "atmel,sama5d4-dma";
 372                                 reg = <0xf0010000 0x1000>;
 373                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
 374                                 #dma-cells = <1>;
 375                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 376                                 clock-names = "dma_clk";
 377                         };
 378
 379                         /* Place dma1 here despite its address */
 380                         dma1: dma-controller@f0004000 {
 381                                 compatible = "atmel,sama5d4-dma";
 382                                 reg = <0xf0004000 0x1000>;
 383                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
 384                                 #dma-cells = <1>;
 385                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 386                                 clock-names = "dma_clk";
 387                         };
 388
 389                         pmc: pmc@f0014000 {
 390                                 compatible = "atmel,sama5d2-pmc", "syscon";
 391                                 reg = <0xf0014000 0x160>;
 392                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
 393                                 #clock-cells = <2>;
 394                                 clocks = <&clk32k>, <&main_xtal>;
 395                                 clock-names = "slow_clk", "main_xtal";
 396                         };
 397
 398                         qspi0: spi@f0020000 {
 399                                 compatible = "atmel,sama5d2-qspi";
 400                                 reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
 401                                 reg-names = "qspi_base", "qspi_mmap";
 402                                 interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
 403                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
 404                                 #address-cells = <1>;
 405                                 #size-cells = <0>;
 406                                 status = "disabled";
 407                         };
 408
 409                         qspi1: spi@f0024000 {
 410                                 compatible = "atmel,sama5d2-qspi";
 411                                 reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
 412                                 reg-names = "qspi_base", "qspi_mmap";
 413                                 interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
 414                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
 415                                 #address-cells = <1>;
 416                                 #size-cells = <0>;
 417                                 status = "disabled";
 418                         };
 419
 420                         sha@f0028000 {
 421                                 compatible = "atmel,at91sam9g46-sha";
 422                                 reg = <0xf0028000 0x100>;
 423                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 424                                 dmas = <&dma0
 425                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 426                                          AT91_XDMAC_DT_PERID(30))>;
 427                                 dma-names = "tx";
 428                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 429                                 clock-names = "sha_clk";
 430                                 status = "okay";
 431                         };
 432
 433                         aes@f002c000 {
 434                                 compatible = "atmel,at91sam9g46-aes";
 435                                 reg = <0xf002c000 0x100>;
 436                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 437                                 dmas = <&dma0
 438                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 439                                          AT91_XDMAC_DT_PERID(26))>,
 440                                        <&dma0
 441                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 442                                          AT91_XDMAC_DT_PERID(27))>;
 443                                 dma-names = "tx", "rx";
 444                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 445                                 clock-names = "aes_clk";
 446                                 status = "okay";
 447                         };
 448
 449                         spi0: spi@f8000000 {
 450                                 compatible = "atmel,at91rm9200-spi";
 451                                 reg = <0xf8000000 0x100>;
 452                                 interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
 453                                 dmas = <&dma0
 454                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 455                                          AT91_XDMAC_DT_PERID(6))>,
 456                                        <&dma0
 457                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 458                                          AT91_XDMAC_DT_PERID(7))>;
 459                                 dma-names = "tx", "rx";
 460                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
 461                                 clock-names = "spi_clk";
 462                                 atmel,fifo-size = <16>;
 463                                 #address-cells = <1>;
 464                                 #size-cells = <0>;
 465                                 status = "disabled";
 466                         };
 467
 468                         ssc0: ssc@f8004000 {
 469                                 compatible = "atmel,at91sam9g45-ssc";
 470                                 reg = <0xf8004000 0x4000>;
 471                                 interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
 472                                 dmas = <&dma0
 473                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 474                                         AT91_XDMAC_DT_PERID(21))>,
 475                                        <&dma0
 476                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 477                                         AT91_XDMAC_DT_PERID(22))>;
 478                                 dma-names = "tx", "rx";
 479                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
 480                                 clock-names = "pclk";
 481                                 status = "disabled";
 482                         };
 483
 484                         macb0: ethernet@f8008000 {
 485                                 compatible = "atmel,sama5d2-gem";
 486                                 reg = <0xf8008000 0x1000>;
 487                                 interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3          /* Queue 0 */
 488                                               66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
 489                                               67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
 490                                 #address-cells = <1>;
 491                                 #size-cells = <0>;
 492                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 493                                 clock-names = "hclk", "pclk";
 494                                 status = "disabled";
 495                         };
 496
 497                         tcb0: timer@f800c000 {
 498                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 499                                 #address-cells = <1>;
 500                                 #size-cells = <0>;
 501                                 reg = <0xf800c000 0x100>;
 502                                 interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
 503                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
 504                                 clock-names = "t0_clk", "slow_clk";
 505                         };
 506
 507                         tcb1: timer@f8010000 {
 508                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 509                                 #address-cells = <1>;
 510                                 #size-cells = <0>;
 511                                 reg = <0xf8010000 0x100>;
 512                                 interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
 513                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
 514                                 clock-names = "t0_clk", "slow_clk";
 515                         };
 516
 517                         hsmc: hsmc@f8014000 {
 518                                 compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
 519                                 reg = <0xf8014000 0x1000>;
 520                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
 521                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
 522                                 #address-cells = <1>;
 523                                 #size-cells = <1>;
 524                                 ranges;
 525
 526                                 pmecc: ecc-engine@f8014070 {
 527                                         compatible = "atmel,sama5d2-pmecc";
 528                                         reg = <0xf8014070 0x490>,
 529                                               <0xf8014500 0x100>;
 530                                 };
 531                         };
 532
 533                         pdmic: pdmic@f8018000 {
 534                                 compatible = "atmel,sama5d2-pdmic";
 535                                 reg = <0xf8018000 0x124>;
 536                                 interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
 537                                 dmas = <&dma0
 538                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 539                                         | AT91_XDMAC_DT_PERID(50))>;
 540                                 dma-names = "rx";
 541                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
 542                                 clock-names = "pclk", "gclk";
 543                                 status = "disabled";
 544                         };
 545
 546                         uart0: serial@f801c000 {
 547                                 compatible = "atmel,at91sam9260-usart";
 548                                 reg = <0xf801c000 0x100>;
 549                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
 550                                 dmas = <&dma0
 551                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 552                                          AT91_XDMAC_DT_PERID(35))>,
 553                                        <&dma0
 554                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 555                                          AT91_XDMAC_DT_PERID(36))>;
 556                                 dma-names = "tx", "rx";
 557                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 558                                 clock-names = "usart";
 559                                 status = "disabled";
 560                         };
 561
 562                         uart1: serial@f8020000 {
 563                                 compatible = "atmel,at91sam9260-usart";
 564                                 reg = <0xf8020000 0x100>;
 565                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
 566                                 dmas = <&dma0
 567                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 568                                          AT91_XDMAC_DT_PERID(37))>,
 569                                        <&dma0
 570                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 571                                          AT91_XDMAC_DT_PERID(38))>;
 572                                 dma-names = "tx", "rx";
 573                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 574                                 clock-names = "usart";
 575                                 status = "disabled";
 576                         };
 577
 578                         uart2: serial@f8024000 {
 579                                 compatible = "atmel,at91sam9260-usart";
 580                                 reg = <0xf8024000 0x100>;
 581                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
 582                                 dmas = <&dma0
 583                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 584                                          AT91_XDMAC_DT_PERID(39))>,
 585                                        <&dma0
 586                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 587                                          AT91_XDMAC_DT_PERID(40))>;
 588                                 dma-names = "tx", "rx";
 589                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 590                                 clock-names = "usart";
 591                                 status = "disabled";
 592                         };
 593
 594                         i2c0: i2c@f8028000 {
 595                                 compatible = "atmel,sama5d2-i2c";
 596                                 reg = <0xf8028000 0x100>;
 597                                 interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
 598                                 dmas = <&dma0
 599                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 600                                          AT91_XDMAC_DT_PERID(0))>,
 601                                        <&dma0
 602                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 603                                          AT91_XDMAC_DT_PERID(1))>;
 604                                 dma-names = "tx", "rx";
 605                                 #address-cells = <1>;
 606                                 #size-cells = <0>;
 607                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
 608                                 atmel,fifo-size = <16>;
 609                                 status = "disabled";
 610                         };
 611
 612                         pwm0: pwm@f802c000 {
 613                                 compatible = "atmel,sama5d2-pwm";
 614                                 reg = <0xf802c000 0x4000>;
 615                                 interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
 616                                 #pwm-cells = <3>;
 617                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 618                         };
 619
 620                         sfr: sfr@f8030000 {
 621                                 compatible = "atmel,sama5d2-sfr", "syscon";
 622                                 reg = <0xf8030000 0x98>;
 623                         };
 624
 625                         flx0: flexcom@f8034000 {
 626                                 compatible = "atmel,sama5d2-flexcom";
 627                                 reg = <0xf8034000 0x200>;
 628                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 629                                 #address-cells = <1>;
 630                                 #size-cells = <1>;
 631                                 ranges = <0x0 0xf8034000 0x800>;
 632                                 status = "disabled";
 633                         };
 634
 635                         flx1: flexcom@f8038000 {
 636                                 compatible = "atmel,sama5d2-flexcom";
 637                                 reg = <0xf8038000 0x200>;
 638                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 639                                 #address-cells = <1>;
 640                                 #size-cells = <1>;
 641                                 ranges = <0x0 0xf8038000 0x800>;
 642                                 status = "disabled";
 643                         };
 644
 645                         securam: sram@f8044000 {
 646                                 compatible = "atmel,sama5d2-securam", "mmio-sram";
 647                                 reg = <0xf8044000 0x1420>;
 648                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
 649                                 #address-cells = <1>;
 650                                 #size-cells = <1>;
 651                                 ranges = <0 0xf8044000 0x1420>;
 652                         };
 653
 654                         reset_controller: rstc@f8048000 {
 655                                 compatible = "atmel,sama5d3-rstc";
 656                                 reg = <0xf8048000 0x10>;
 657                                 clocks = <&clk32k>;
 658                         };
 659
 660                         shutdown_controller: shdwc@f8048010 {
 661                                 compatible = "atmel,sama5d2-shdwc";
 662                                 reg = <0xf8048010 0x10>;
 663                                 clocks = <&clk32k>;
 664                                 #address-cells = <1>;
 665                                 #size-cells = <0>;
 666                                 atmel,wakeup-rtc-timer;
 667                         };
 668
 669                         pit: timer@f8048030 {
 670                                 compatible = "atmel,at91sam9260-pit";
 671                                 reg = <0xf8048030 0x10>;
 672                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
 673                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
 674                         };
 675
 676                         watchdog: watchdog@f8048040 {
 677                                 compatible = "atmel,sama5d4-wdt";
 678                                 reg = <0xf8048040 0x10>;
 679                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
 680                                 clocks = <&clk32k>;
 681                                 status = "disabled";
 682                         };
 683
 684                         clk32k: sckc@f8048050 {
 685                                 compatible = "atmel,sama5d4-sckc";
 686                                 reg = <0xf8048050 0x4>;
 687
 688                                 clocks = <&slow_xtal>;
 689                                 #clock-cells = <0>;
 690                         };
 691
 692                         rtc@f80480b0 {
 693                                 compatible = "atmel,at91rm9200-rtc";
 694                                 reg = <0xf80480b0 0x30>;
 695                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
 696                                 clocks = <&clk32k>;
 697                         };
 698
 699                         i2s0: i2s@f8050000 {
 700                                 compatible = "atmel,sama5d2-i2s";
 701                                 reg = <0xf8050000 0x100>;
 702                                 interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
 703                                 dmas = <&dma0
 704                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 705                                          AT91_XDMAC_DT_PERID(31))>,
 706                                        <&dma0
 707                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 708                                          AT91_XDMAC_DT_PERID(32))>;
 709                                 dma-names = "tx", "rx";
 710                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
 711                                 clock-names = "pclk", "gclk";
 712                                 assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
 713                                 assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
 714                                 status = "disabled";
 715                         };
 716
 717                         can0: can@f8054000 {
 718                                 compatible = "bosch,m_can";
 719                                 reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
 720                                 reg-names = "m_can", "message_ram";
 721                                 interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
 722                                              <64 IRQ_TYPE_LEVEL_HIGH 7>;
 723                                 interrupt-names = "int0", "int1";
 724                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
 725                                 clock-names = "hclk", "cclk";
 726                                 assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
 727                                 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
 728                                 assigned-clock-rates = <40000000>;
 729                                 bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
 730                                 status = "disabled";
 731                         };
 732
 733                         spi1: spi@fc000000 {
 734                                 compatible = "atmel,at91rm9200-spi";
 735                                 reg = <0xfc000000 0x100>;
 736                                 interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
 737                                 dmas = <&dma0
 738                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 739                                          AT91_XDMAC_DT_PERID(8))>,
 740                                        <&dma0
 741                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 742                                          AT91_XDMAC_DT_PERID(9))>;
 743                                 dma-names = "tx", "rx";
 744                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
 745                                 clock-names = "spi_clk";
 746                                 atmel,fifo-size = <16>;
 747                                 #address-cells = <1>;
 748                                 #size-cells = <0>;
 749                                 status = "disabled";
 750                         };
 751
 752                         uart3: serial@fc008000 {
 753                                 compatible = "atmel,at91sam9260-usart";
 754                                 reg = <0xfc008000 0x100>;
 755                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
 756                                 dmas = <&dma1
 757                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 758                                          AT91_XDMAC_DT_PERID(41))>,
 759                                        <&dma1
 760                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 761                                          AT91_XDMAC_DT_PERID(42))>;
 762                                 dma-names = "tx", "rx";
 763                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
 764                                 clock-names = "usart";
 765                                 status = "disabled";
 766                         };
 767
 768                         uart4: serial@fc00c000 {
 769                                 compatible = "atmel,at91sam9260-usart";
 770                                 reg = <0xfc00c000 0x100>;
 771                                 dmas = <&dma0
 772                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 773                                          AT91_XDMAC_DT_PERID(43))>,
 774                                        <&dma0
 775                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 776                                          AT91_XDMAC_DT_PERID(44))>;
 777                                 dma-names = "tx", "rx";
 778                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
 779                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 780                                 clock-names = "usart";
 781                                 status = "disabled";
 782                         };
 783
 784                         flx2: flexcom@fc010000 {
 785                                 compatible = "atmel,sama5d2-flexcom";
 786                                 reg = <0xfc010000 0x200>;
 787                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 788                                 #address-cells = <1>;
 789                                 #size-cells = <1>;
 790                                 ranges = <0x0 0xfc010000 0x800>;
 791                                 status = "disabled";
 792                         };
 793
 794                         flx3: flexcom@fc014000 {
 795                                 compatible = "atmel,sama5d2-flexcom";
 796                                 reg = <0xfc014000 0x200>;
 797                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 798                                 #address-cells = <1>;
 799                                 #size-cells = <1>;
 800                                 ranges = <0x0 0xfc014000 0x800>;
 801                                 status = "disabled";
 802                         };
 803
 804                         flx4: flexcom@fc018000 {
 805                                 compatible = "atmel,sama5d2-flexcom";
 806                                 reg = <0xfc018000 0x200>;
 807                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 808                                 #address-cells = <1>;
 809                                 #size-cells = <1>;
 810                                 ranges = <0x0 0xfc018000 0x800>;
 811                                 status = "disabled";
 812                         };
 813
 814                         trng@fc01c000 {
 815                                 compatible = "atmel,at91sam9g45-trng";
 816                                 reg = <0xfc01c000 0x100>;
 817                                 interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
 818                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 819                         };
 820
 821                         aic: interrupt-controller@fc020000 {
 822                                 #interrupt-cells = <3>;
 823                                 compatible = "atmel,sama5d2-aic";
 824                                 interrupt-controller;
 825                                 reg = <0xfc020000 0x200>;
 826                                 atmel,external-irqs = <49>;
 827                         };
 828
 829                         i2c1: i2c@fc028000 {
 830                                 compatible = "atmel,sama5d2-i2c";
 831                                 reg = <0xfc028000 0x100>;
 832                                 interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
 833                                 dmas = <&dma0
 834                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 835                                          AT91_XDMAC_DT_PERID(2))>,
 836                                        <&dma0
 837                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 838                                          AT91_XDMAC_DT_PERID(3))>;
 839                                 dma-names = "tx", "rx";
 840                                 #address-cells = <1>;
 841                                 #size-cells = <0>;
 842                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
 843                                 atmel,fifo-size = <16>;
 844                                 status = "disabled";
 845                         };
 846
 847                         adc: adc@fc030000 {
 848                                 compatible = "atmel,sama5d2-adc";
 849                                 reg = <0xfc030000 0x100>;
 850                                 interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
 851                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 852                                 clock-names = "adc_clk";
 853                                 dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
 854                                 dma-names = "rx";
 855                                 atmel,min-sample-rate-hz = <200000>;
 856                                 atmel,max-sample-rate-hz = <20000000>;
 857                                 atmel,startup-time-ms = <4>;
 858                                 atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 859                                 #io-channel-cells = <1>;
 860                                 status = "disabled";
 861                         };
 862
 863                         resistive_touch: resistive-touch {
 864                                 compatible = "resistive-adc-touch";
 865                                 io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
 866                                               <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
 867                                               <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
 868                                 io-channel-names = "x", "y", "pressure";
 869                                 touchscreen-min-pressure = <50000>;
 870                                 status = "disabled";
 871                         };
 872
 873                         pioA: pinctrl@fc038000 {
 874                                 compatible = "atmel,sama5d2-pinctrl";
 875                                 reg = <0xfc038000 0x600>;
 876                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
 877                                              <68 IRQ_TYPE_LEVEL_HIGH 7>,
 878                                              <69 IRQ_TYPE_LEVEL_HIGH 7>,
 879                                              <70 IRQ_TYPE_LEVEL_HIGH 7>;
 880                                 interrupt-controller;
 881                                 #interrupt-cells = <2>;
 882                                 gpio-controller;
 883                                 #gpio-cells = <2>;
 884                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 885                         };
 886
 887                         secumod@fc040000 {
 888                                 compatible = "atmel,sama5d2-secumod", "syscon";
 889                                 reg = <0xfc040000 0x100>;
 890                         };
 891
 892                         tdes@fc044000 {
 893                                 compatible = "atmel,at91sam9g46-tdes";
 894                                 reg = <0xfc044000 0x100>;
 895                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
 896                                 dmas = <&dma0
 897                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 898                                          AT91_XDMAC_DT_PERID(28))>,
 899                                        <&dma0
 900                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 901                                          AT91_XDMAC_DT_PERID(29))>;
 902                                 dma-names = "tx", "rx";
 903                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 904                                 clock-names = "tdes_clk";
 905                                 status = "okay";
 906                         };
 907
 908                         classd: classd@fc048000 {
 909                                 compatible = "atmel,sama5d2-classd";
 910                                 reg = <0xfc048000 0x100>;
 911                                 interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
 912                                 dmas = <&dma0
 913                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 914                                          AT91_XDMAC_DT_PERID(47))>;
 915                                 dma-names = "tx";
 916                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
 917                                 clock-names = "pclk", "gclk";
 918                                 status = "disabled";
 919                         };
 920
 921                         i2s1: i2s@fc04c000 {
 922                                 compatible = "atmel,sama5d2-i2s";
 923                                 reg = <0xfc04c000 0x100>;
 924                                 interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
 925                                 dmas = <&dma0
 926                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 927                                          AT91_XDMAC_DT_PERID(33))>,
 928                                        <&dma0
 929                                         (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 930                                          AT91_XDMAC_DT_PERID(34))>;
 931                                 dma-names = "tx", "rx";
 932                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 933                                 clock-names = "pclk", "gclk";
 934                                 assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
 935                                 assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
 936                                 status = "disabled";
 937                         };
 938
 939                         can1: can@fc050000 {
 940                                 compatible = "bosch,m_can";
 941                                 reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
 942                                 reg-names = "m_can", "message_ram";
 943                                 interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
 944                                              <65 IRQ_TYPE_LEVEL_HIGH 7>;
 945                                 interrupt-names = "int0", "int1";
 946                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
 947                                 clock-names = "hclk", "cclk";
 948                                 assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
 949                                 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
 950                                 assigned-clock-rates = <40000000>;
 951                                 bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
 952                                 status = "disabled";
 953                         };
 954
 955                         sfrbu: sfr@fc05c000 {
 956                                 compatible = "atmel,sama5d2-sfrbu", "syscon";
 957                                 reg = <0xfc05c000 0x20>;
 958                         };
 959
 960                         chipid@fc069000 {
 961                                 compatible = "atmel,sama5d2-chipid";
 962                                 reg = <0xfc069000 0x8>;
 963                         };
 964                 };
 965         };
 966 };