2 * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include <dt-bindings/input/input.h>
45 #include "rk3288.dtsi"
48 model = "mqmaker MiQi";
49 compatible = "mqmaker,miqi", "rockchip,rk3288";
52 stdout-path = "serial2:115200n8";
56 device_type = "memory";
60 ext_gmac: external-gmac-clock {
61 compatible = "fixed-clock";
63 clock-frequency = <125000000>;
64 clock-output-names = "ext_gmac";
68 compatible = "gpio-leds";
71 gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
72 label = "miqi:green:user";
73 linux,default-trigger = "timer";
77 vcc_flash: flash-regulator {
78 compatible = "regulator-fixed";
79 regulator-name = "vcc_flash";
80 regulator-min-microvolt = <1800000>;
81 regulator-max-microvolt = <1800000>;
82 vin-supply = <&vcc_io>;
85 vcc_host: usb-host-regulator {
86 compatible = "regulator-fixed";
88 gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&host_vbus_drv>;
91 regulator-name = "vcc_host";
92 regulator-min-microvolt = <5000000>;
93 regulator-max-microvolt = <5000000>;
95 vin-supply = <&vcc_sys>;
98 vcc_sd: sdmmc-regulator {
99 compatible = "regulator-fixed";
100 gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
101 pinctrl-names = "default";
102 pinctrl-0 = <&sdmmc_pwr>;
103 regulator-name = "vcc_sd";
104 regulator-min-microvolt = <3300000>;
105 regulator-max-microvolt = <3300000>;
106 startup-delay-us = <100000>;
107 vin-supply = <&vcc_io>;
110 vcc_sys: vsys-regulator {
111 compatible = "regulator-fixed";
112 regulator-name = "vcc_sys";
113 regulator-min-microvolt = <5000000>;
114 regulator-max-microvolt = <5000000>;
121 cpu0-supply = <&vdd_cpu>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
132 vmmc-supply = <&vcc_io>;
133 vqmmc-supply = <&vcc_flash>;
138 assigned-clocks = <&cru SCLK_MAC>;
139 assigned-clock-parents = <&ext_gmac>;
140 clock_in_out = "input";
141 pinctrl-names = "default";
142 pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
143 phy-supply = <&vcc_lan>;
145 snps,reset-active-low;
146 snps,reset-delays-us = <0 10000 1000000>;
147 snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
154 ddc-i2c-bus = <&i2c5>;
159 clock-frequency = <400000>;
163 compatible = "silergy,syr827";
164 fcs,suspend-voltage-selector = <1>;
166 regulator-name = "vdd_cpu";
167 regulator-min-microvolt = <850000>;
168 regulator-max-microvolt = <1350000>;
171 regulator-enable-ramp-delay = <300>;
172 regulator-ramp-delay = <8000>;
173 vin-supply = <&vcc_sys>;
177 compatible = "silergy,syr828";
178 fcs,suspend-voltage-selector = <1>;
180 regulator-name = "vdd_gpu";
181 regulator-min-microvolt = <850000>;
182 regulator-max-microvolt = <1350000>;
184 vin-supply = <&vcc_sys>;
187 hym8563: hym8563@51 {
188 compatible = "haoyu,hym8563";
191 clock-frequency = <32768>;
192 clock-output-names = "xin32k";
195 act8846: act8846@5a {
196 compatible = "active-semi,act8846";
198 pinctrl-names = "default";
199 pinctrl-0 = <&pmic_vsel>;
200 system-power-controller;
202 vp1-supply = <&vcc_sys>;
203 vp2-supply = <&vcc_sys>;
204 vp3-supply = <&vcc_sys>;
205 vp4-supply = <&vcc_sys>;
206 inl1-supply = <&vcc_sys>;
207 inl2-supply = <&vcc_sys>;
208 inl3-supply = <&vcc_20>;
212 regulator-name = "vcc_ddr";
217 regulator-name = "vcc_io";
218 regulator-min-microvolt = <3300000>;
219 regulator-max-microvolt = <3300000>;
224 regulator-name = "vdd_log";
225 regulator-min-microvolt = <1100000>;
226 regulator-max-microvolt = <1100000>;
231 regulator-name = "vcc_20";
232 regulator-min-microvolt = <2000000>;
233 regulator-max-microvolt = <2000000>;
238 regulator-name = "vccio_sd";
239 regulator-min-microvolt = <3300000>;
240 regulator-max-microvolt = <3300000>;
245 regulator-name = "vdd10_lcd";
246 regulator-min-microvolt = <1000000>;
247 regulator-max-microvolt = <1000000>;
252 regulator-name = "vcca_18";
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
258 regulator-name = "vcca_33";
259 regulator-min-microvolt = <3300000>;
260 regulator-max-microvolt = <3300000>;
264 regulator-name = "vcc_lan";
265 regulator-min-microvolt = <3300000>;
266 regulator-max-microvolt = <3300000>;
270 regulator-name = "vdd_10";
271 regulator-min-microvolt = <1000000>;
272 regulator-max-microvolt = <1000000>;
277 regulator-name = "vcc_18";
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
284 regulator-name = "vcc18_lcd";
285 regulator-min-microvolt = <1800000>;
286 regulator-max-microvolt = <1800000>;
312 audio-supply = <&vcca_33>;
313 flash0-supply = <&vcc_flash>;
314 flash1-supply = <&vcc_lan>;
315 gpio30-supply = <&vcc_io>;
316 gpio1830-supply = <&vcc_io>;
317 lcdc-supply = <&vcc_io>;
318 sdcard-supply = <&vccio_sd>;
319 wifi-supply = <&vcc_18>;
323 pcfg_output_high: pcfg-output-high {
327 pcfg_output_low: pcfg-output-low {
331 pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
333 drive-strength = <12>;
338 rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
341 pmic_sleep: pmic-sleep {
342 rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
345 pmic_vsel: pmic-vsel {
346 rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
352 rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
356 rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
360 rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
366 * Default drive strength isn't enough to achieve even
367 * high-speed mode on firefly board so bump up to 12ma.
369 sdmmc_bus4: sdmmc-bus4 {
370 rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
371 <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
372 <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
373 <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
376 sdmmc_clk: sdmmc-clk {
377 rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
380 sdmmc_cmd: sdmmc-cmd {
381 rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
384 sdmmc_pwr: sdmmc-pwr {
385 rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
390 host_vbus_drv: host-vbus-drv {
391 rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
397 vref-supply = <&vcc_18>;
405 card-detect-delay = <200>;
408 pinctrl-names = "default";
409 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
410 vmmc-supply = <&vcc_sd>;
411 vqmmc-supply = <&vccio_sd>;
416 rockchip,hw-tshut-mode = <0>;
417 rockchip,hw-tshut-polarity = <0>;
439 * The otg controller is the only system power source,
440 * so needs to always stay in device mode.
442 dr_mode = "peripheral";