arch/arm/boot/dts/qcom-pma8084.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   3 #include <dt-bindings/interrupt-controller/irq.h>
   4 #include <dt-bindings/spmi/spmi.h>
   5
   6 &spmi_bus {
   7
   8         pma8084_0: pma8084@0 {
   9                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
  10                 reg = <0x0 SPMI_USID>;
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13
  14                 rtc@6000 {
  15                         compatible = "qcom,pm8941-rtc";
  16                         reg = <0x6000>,
  17                               <0x6100>;
  18                         reg-names = "rtc", "alarm";
  19                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  20                 };
  21
  22                 pwrkey@800 {
  23                         compatible = "qcom,pm8941-pwrkey";
  24                         reg = <0x800>;
  25                         interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  26                         debounce = <15625>;
  27                         bias-pull-up;
  28                 };
  29
  30                 pma8084_gpios: gpios@c000 {
  31                         compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
  32                         reg = <0xc000>;
  33                         gpio-controller;
  34                         #gpio-cells = <2>;
  35                         interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
  36                                      <0 0xc1 0 IRQ_TYPE_NONE>,
  37                                      <0 0xc2 0 IRQ_TYPE_NONE>,
  38                                      <0 0xc3 0 IRQ_TYPE_NONE>,
  39                                      <0 0xc4 0 IRQ_TYPE_NONE>,
  40                                      <0 0xc5 0 IRQ_TYPE_NONE>,
  41                                      <0 0xc6 0 IRQ_TYPE_NONE>,
  42                                      <0 0xc7 0 IRQ_TYPE_NONE>,
  43                                      <0 0xc8 0 IRQ_TYPE_NONE>,
  44                                      <0 0xc9 0 IRQ_TYPE_NONE>,
  45                                      <0 0xca 0 IRQ_TYPE_NONE>,
  46                                      <0 0xcb 0 IRQ_TYPE_NONE>,
  47                                      <0 0xcc 0 IRQ_TYPE_NONE>,
  48                                      <0 0xcd 0 IRQ_TYPE_NONE>,
  49                                      <0 0xce 0 IRQ_TYPE_NONE>,
  50                                      <0 0xcf 0 IRQ_TYPE_NONE>,
  51                                      <0 0xd0 0 IRQ_TYPE_NONE>,
  52                                      <0 0xd1 0 IRQ_TYPE_NONE>,
  53                                      <0 0xd2 0 IRQ_TYPE_NONE>,
  54                                      <0 0xd3 0 IRQ_TYPE_NONE>,
  55                                      <0 0xd4 0 IRQ_TYPE_NONE>,
  56                                      <0 0xd5 0 IRQ_TYPE_NONE>;
  57                 };
  58
  59                 pma8084_mpps: mpps@a000 {
  60                         compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
  61                         reg = <0xa000>;
  62                         gpio-controller;
  63                         #gpio-cells = <2>;
  64                         interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
  65                                      <0 0xa1 0 IRQ_TYPE_NONE>,
  66                                      <0 0xa2 0 IRQ_TYPE_NONE>,
  67                                      <0 0xa3 0 IRQ_TYPE_NONE>,
  68                                      <0 0xa4 0 IRQ_TYPE_NONE>,
  69                                      <0 0xa5 0 IRQ_TYPE_NONE>,
  70                                      <0 0xa6 0 IRQ_TYPE_NONE>,
  71                                      <0 0xa7 0 IRQ_TYPE_NONE>;
  72                 };
  73
  74                 pma8084_temp: temp-alarm@2400 {
  75                         compatible = "qcom,spmi-temp-alarm";
  76                         reg = <0x2400>;
  77                         interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
  78                         #thermal-sensor-cells = <0>;
  79                         io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
  80                         io-channel-names = "thermal";
  81                 };
  82
  83                 pma8084_vadc: vadc@3100 {
  84                         compatible = "qcom,spmi-vadc";
  85                         reg = <0x3100>;
  86                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  87                         #address-cells = <1>;
  88                         #size-cells = <0>;
  89                         #io-channel-cells = <1>;
  90                         io-channel-ranges;
  91
  92                         die_temp {
  93                                 reg = <VADC_DIE_TEMP>;
  94                         };
  95                         ref_625mv {
  96                                 reg = <VADC_REF_625MV>;
  97                         };
  98                         ref_1250v {
  99                                 reg = <VADC_REF_1250MV>;
 100                         };
 101                         ref_buf_625mv {
 102                                 reg = <VADC_SPARE1>;
 103                         };
 104                         ref_gnd {
 105                                 reg = <VADC_GND_REF>;
 106                         };
 107                         ref_vdd {
 108                                 reg = <VADC_VDD_VADC>;
 109                         };
 110                 };
 111         };
 112
 113         pma8084_1: pma8084@1 {
 114                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
 115                 reg = <0x1 SPMI_USID>;
 116                 #address-cells = <1>;
 117                 #size-cells = <0>;
 118         };
 119 };