arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2
   3 #include "armada-385-clearfog-gtr.dtsi"
   4
   5 / {
   6         model = "SolidRun Clearfog GTR S4";
   7         compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
   8                      "marvell,armada380";
   9 };
  10
  11 &sfp0 {
  12         tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
  13 };
  14
  15 &mdio {
  16         switch0: ethernet-switch@4 {
  17                 compatible = "marvell,mv88e6085";
  18                 reg = <4>;
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&cf_gtr_switch_reset_pins>;
  21                 reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  22
  23                 ethernet-ports {
  24                         #address-cells = <1>;
  25                         #size-cells = <0>;
  26
  27                         ethernet-port@1 {
  28                                 reg = <1>;
  29                                 label = "lan2";
  30                                 phy-handle = <&switch0phy0>;
  31                         };
  32
  33                         ethernet-port@2 {
  34                                 reg = <2>;
  35                                 label = "lan1";
  36                                 phy-handle = <&switch0phy1>;
  37                         };
  38
  39                         ethernet-port@3 {
  40                                 reg = <3>;
  41                                 label = "lan4";
  42                                 phy-handle = <&switch0phy2>;
  43                         };
  44
  45                         ethernet-port@4 {
  46                                 reg = <4>;
  47                                 label = "lan3";
  48                                 phy-handle = <&switch0phy3>;
  49                         };
  50
  51                         ethernet-port@5 {
  52                                 reg = <5>;
  53                                 phy-mode = "2500base-x";
  54                                 ethernet = <&eth1>;
  55
  56                                 fixed-link {
  57                                         speed = <2500>;
  58                                         full-duplex;
  59                                 };
  60                         };
  61
  62                 };
  63
  64                 mdio {
  65                         #address-cells = <1>;
  66                         #size-cells = <0>;
  67
  68                         switch0phy0: ethernet-phy@11 {
  69                                 reg = <0x11>;
  70                         };
  71
  72                         switch0phy1: ethernet-phy@12 {
  73                                 reg = <0x12>;
  74                         };
  75
  76                         switch0phy2: ethernet-phy@13 {
  77                                 reg = <0x13>;
  78                         };
  79
  80                         switch0phy3: ethernet-phy@14 {
  81                                 reg = <0x14>;
  82                         };
  83                 };
  84
  85         };
  86 };