arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 / {
   4         gpio_keys {
   5                 compatible = "gpio-keys";
   6                 pinctrl-names = "default";
   7                 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
   8
   9                 sysboot2 {
  10                         label = "sysboot2";
  11                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;     /* gpio2 */
  12                         linux,code = <BTN_0>;
  13                         wakeup-source;
  14                 };
  15
  16                 sysboot5 {
  17                         label = "sysboot5";
  18                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;     /* gpio7 */
  19                         linux,code = <BTN_1>;
  20                         wakeup-source;
  21                 };
  22
  23                 gpio1 {
  24                         label = "gpio1";
  25                         gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;    /* gpio181 */
  26                         linux,code = <BTN_2>;
  27                         wakeup-source;
  28                 };
  29
  30                 gpio2 {
  31                         label = "gpio2";
  32                         gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;    /* gpio178 */
  33                         linux,code = <BTN_3>;
  34                         wakeup-source;
  35                 };
  36         };
  37
  38         sound {
  39                 compatible = "ti,omap-twl4030";
  40                 ti,model = "omap3logic";
  41                 ti,mcbsp = <&mcbsp2>;
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46                 pinctrl-names = "default";
  47                 pinctrl-0 = <&led_pins>;
  48
  49                 led1 {
  50                         label = "led1";
  51                         gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;   /* gpio180 */
  52                         linux,default-trigger = "cpu0";
  53                 };
  54
  55                 led2 {
  56                         label = "led2";
  57                         gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;   /* gpio179 */
  58                         linux,default-trigger = "none";
  59                 };
  60         };
  61
  62         pwm10: dmtimer-pwm {
  63                 compatible = "ti,omap-dmtimer-pwm";
  64                 pinctrl-names = "default";
  65                 pinctrl-0 = <&pwm_pins>;
  66                 ti,timers = <&timer10>;
  67                 #pwm-cells = <3>;
  68         };
  69
  70 };
  71
  72 &vaux1 {
  73         regulator-min-microvolt = <3000000>;
  74         regulator-max-microvolt = <3000000>;
  75 };
  76
  77 &vaux4 {
  78         regulator-min-microvolt = <1800000>;
  79         regulator-max-microvolt = <1800000>;
  80 };
  81
  82 &mcbsp2 {
  83         status = "okay";
  84 };
  85
  86 &charger {
  87         ti,bb-uvolt = <3200000>;
  88         ti,bb-uamp = <150>;
  89 };
  90
  91 &gpmc {
  92         ranges = <0 0 0x30000000 0x1000000      /* CS0: 16MB for NAND */
  93                   1 0 0x2c000000 0x1000000>;    /* CS1: 16MB for LAN9221 */
  94
  95         ethernet@gpmc {
  96                 pinctrl-names = "default";
  97                 pinctrl-0 = <&lan9221_pins>;
  98                 interrupt-parent = <&gpio5>;
  99                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;            /* gpio129 */
 100                 reg = <1 0 0xff>;
 101         };
 102 };
 103
 104 &vpll2 {
 105         regulator-always-on;
 106 };
 107
 108 &dss {
 109         status = "ok";
 110         vdds_dsi-supply = <&vpll2>;
 111         pinctrl-names = "default";
 112         pinctrl-0 = <&dss_dpi_pins1>;
 113         port {
 114                 dpi_out: endpoint {
 115                         remote-endpoint = <&lcd_in>;
 116                         data-lines = <16>;
 117                 };
 118         };
 119 };
 120
 121 / {
 122         aliases {
 123                 display0 = &lcd0;
 124         };
 125
 126         lcd0: display {
 127                 /* This isn't the exact LCD, but the timings meet spec */
 128                 /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
 129                 compatible = "newhaven,nhd-4.3-480272ef-atxl";
 130                 label = "15";
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&panel_pwr_pins>;
 133                 backlight = <&bl>;
 134                 enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 135                 port {
 136                         lcd_in: endpoint {
 137                                 remote-endpoint = <&dpi_out>;
 138                         };
 139                 };
 140         };
 141
 142         bl: backlight {
 143                 compatible = "pwm-backlight";
 144                 pinctrl-names = "default";
 145                 pinctrl-0 = <&backlight_pins>;
 146                 pwms = <&pwm10 0 5000000 0>;
 147                 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 148                 default-brightness-level = <7>;
 149                 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
 150         };
 151 };
 152
 153 &mmc1 {
 154         interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 155         pinctrl-names = "default";
 156         pinctrl-0 = <&mmc1_pins &mmc1_cd>;
 157         cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;         /* gpio127 */
 158         vmmc-supply = <&vmmc1>;
 159         bus-width = <4>;
 160         cap-power-off-card;
 161 };
 162
 163 &omap3_pmx_core {
 164         gpio_key_pins: pinmux_gpio_key_pins {
 165                 pinctrl-single,pins = <
 166                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
 167                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
 168                 >;
 169         };
 170
 171         pwm_pins: pinmux_pwm_pins {
 172                 pinctrl-single,pins = <
 173                         OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
 174                 >;
 175         };
 176
 177         led_pins: pinmux_led_pins {
 178                 pinctrl-single,pins = <
 179                         OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)       /* gpio_179 */
 180                         OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)       /* gpio_180 */
 181                 >;
 182         };
 183
 184         mmc1_pins: pinmux_mmc1_pins {
 185                 pinctrl-single,pins = <
 186                         OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)       /* sdmmc1_clk.sdmmc1_clk */
 187                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)        /* sdmmc1_cmd.sdmmc1_cmd */
 188                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat0.sdmmc1_dat0 */
 189                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat1.sdmmc1_dat1 */
 190                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat2.sdmmc1_dat2 */
 191                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat3.sdmmc1_dat3 */
 192                 >;
 193         };
 194
 195         tsc2004_pins: pinmux_tsc2004_pins {
 196                 pinctrl-single,pins = <
 197                         OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)        /* mcbsp4_dr.gpio_153 */
 198                 >;
 199         };
 200
 201         backlight_pins: pinmux_backlight_pins {
 202                 pinctrl-single,pins = <
 203                         OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
 204                 >;
 205         };
 206
 207         isp_pins: pinmux_isp_pins {
 208                 pinctrl-single,pins = <
 209                         OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
 210                         OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
 211                         OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
 212                         OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
 213
 214                         OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
 215                         OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
 216                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
 217                         OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
 218                         OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
 219                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
 220                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
 221                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
 222                 >;
 223         };
 224
 225         panel_pwr_pins: pinmux_panel_pwr_pins {
 226                 pinctrl-single,pins = <
 227                         OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
 228                 >;
 229         };
 230
 231         dss_dpi_pins1: pinmux_dss_dpi_pins1 {
 232                 pinctrl-single,pins = <
 233                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
 234                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
 235                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
 236                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
 237
 238                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
 239                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
 240                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
 241                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
 242                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
 243                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
 244                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
 245                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
 246                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
 247                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
 248                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
 249                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
 250
 251                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
 252                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
 253                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
 254                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
 255                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
 256                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
 257                 >;
 258         };
 259 };
 260
 261 &omap3_pmx_wkup {
 262         gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
 263                 pinctrl-single,pins = <
 264                         OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot0.gpio_2 */
 265                         OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot5.gpio_7 */
 266                 >;
 267         };
 268
 269         lan9221_pins: pinmux_lan9221_pins {
 270                 pinctrl-single,pins = <
 271                         OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)         /* reserved.gpio_129 */
 272                 >;
 273         };
 274
 275         mmc1_cd: pinmux_mmc1_cd {
 276                 pinctrl-single,pins = <
 277                         OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)  /* reserved.gpio_127 */
 278                 >;
 279         };
 280 };
 281
 282 &i2c2 {
 283         mt9p031@48 {
 284                 compatible = "aptina,mt9p031";
 285                 reg = <0x48>;
 286                 clocks = <&isp 0>;
 287                 vaa-supply = <&vaux4>;
 288                 vdd-supply = <&vaux4>;
 289                 vdd_io-supply = <&vaux4>;
 290                 port {
 291                         mt9p031_out: endpoint {
 292                                 input-clock-frequency = <24000000>;
 293                                 pixel-clock-frequency = <72000000>;
 294                                 remote-endpoint = <&ccdc_ep>;
 295                         };
 296                 };
 297         };
 298 };
 299
 300 &i2c3 {
 301         touchscreen: tsc2004@48 {
 302                 compatible = "ti,tsc2004";
 303                 reg = <0x48>;
 304                 vio-supply = <&vaux1>;
 305                 pinctrl-names = "default";
 306                 pinctrl-0 = <&tsc2004_pins>;
 307                 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
 308
 309                 touchscreen-fuzz-x = <4>;
 310                 touchscreen-fuzz-y = <7>;
 311                 touchscreen-fuzz-pressure = <2>;
 312                 touchscreen-size-x = <4096>;
 313                 touchscreen-size-y = <4096>;
 314                 touchscreen-max-pressure = <2048>;
 315
 316                 ti,x-plate-ohms = <280>;
 317                 ti,esd-recovery-timeout-ms = <8000>;
 318         };
 319 };
 320
 321 &mcspi1 {
 322         at25@0 {
 323                 compatible = "atmel,at25";
 324                 reg = <0>;
 325                 spi-max-frequency = <5000000>;
 326                 spi-cpha;
 327                 spi-cpol;
 328
 329                 pagesize = <64>;
 330                 size = <32768>;
 331                 address-width = <16>;
 332         };
 333 };
 334
 335 &isp {
 336         pinctrl-names = "default";
 337         pinctrl-0 = <&isp_pins>;
 338         ports {
 339                 port@0 {
 340                         reg = <0>;
 341                         ccdc_ep: endpoint {
 342                                 remote-endpoint = <&mt9p031_out>;
 343                                 bus-width = <8>;
 344                                 hsync-active = <1>;
 345                                 vsync-active = <1>;
 346                                 pclk-sample = <0>;
 347                         };
 348                 };
 349         };
 350 };
 351
 352 &uart1 {
 353         interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 354 };
 355
 356 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
 357 &usb_otg_hs {
 358         pinctrl-names = "default";
 359         pinctrl-0 = <&hsusb_otg_pins>;
 360         interface-type = <0>;
 361         usb-phy = <&usb2_phy>;
 362         phys = <&usb2_phy>;
 363         phy-names = "usb2-phy";
 364         mode = <3>;
 365         power = <50>;
 366 };