arch/arm/boot/dts/imx6qdl-rex.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright 2014 FEDEVEL, Inc.
   4  *
   5  * Author: Robert Nelson <robertcnelson@gmail.com>
   6  */
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10
  11 / {
  12         chosen {
  13                 stdout-path = &uart1;
  14         };
  15
  16         regulators {
  17                 compatible = "simple-bus";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 reg_3p3v: regulator@0 {
  22                         compatible = "regulator-fixed";
  23                         reg = <0>;
  24                         regulator-name = "3P3V";
  25                         regulator-min-microvolt = <3300000>;
  26                         regulator-max-microvolt = <3300000>;
  27                         regulator-always-on;
  28                 };
  29
  30                 reg_usbh1_vbus: regulator@1 {
  31                         compatible = "regulator-fixed";
  32                         reg = <1>;
  33                         pinctrl-names = "default";
  34                         regulator-name = "usbh1_vbus";
  35                         regulator-min-microvolt = <5000000>;
  36                         regulator-max-microvolt = <5000000>;
  37                         gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
  38                         enable-active-high;
  39                 };
  40
  41                 reg_usb_otg_vbus: regulator@2 {
  42                         compatible = "regulator-fixed";
  43                         reg = <2>;
  44                         pinctrl-names = "default";
  45                         regulator-name = "usb_otg_vbus";
  46                         regulator-min-microvolt = <5000000>;
  47                         regulator-max-microvolt = <5000000>;
  48                         gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  49                         enable-active-high;
  50                 };
  51         };
  52
  53         leds {
  54                 compatible = "gpio-leds";
  55                 pinctrl-names = "default";
  56                 pinctrl-0 = <&pinctrl_led>;
  57
  58                 led0: usr {
  59                         label = "usr";
  60                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                         linux,default-trigger = "heartbeat";
  63                 };
  64         };
  65
  66         sound {
  67                 compatible = "fsl,imx6-rex-sgtl5000",
  68                              "fsl,imx-audio-sgtl5000";
  69                 model = "imx6-rex-sgtl5000";
  70                 ssi-controller = <&ssi1>;
  71                 audio-codec = <&codec>;
  72                 audio-routing =
  73                         "MIC_IN", "Mic Jack",
  74                         "Mic Jack", "Mic Bias",
  75                         "Headphone Jack", "HP_OUT";
  76                 mux-int-port = <1>;
  77                 mux-ext-port = <3>;
  78         };
  79 };
  80
  81 &audmux {
  82         pinctrl-names = "default";
  83         pinctrl-0 = <&pinctrl_audmux>;
  84         status = "okay";
  85 };
  86
  87 &ecspi2 {
  88         cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&pinctrl_ecspi2>;
  91         status = "okay";
  92 };
  93
  94 &ecspi3 {
  95         cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&pinctrl_ecspi3>;
  98         status = "okay";
  99 };
 100
 101 &fec {
 102         pinctrl-names = "default";
 103         pinctrl-0 = <&pinctrl_enet>;
 104         phy-mode = "rgmii";
 105         phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 106         status = "okay";
 107 };
 108
 109 &hdmi {
 110         ddc-i2c-bus = <&i2c2>;
 111         status = "okay";
 112 };
 113
 114 &i2c1 {
 115         clock-frequency = <100000>;
 116         pinctrl-names = "default";
 117         pinctrl-0 = <&pinctrl_i2c1>;
 118         status = "okay";
 119
 120         codec: sgtl5000@a {
 121                 compatible = "fsl,sgtl5000";
 122                 reg = <0x0a>;
 123                 clocks = <&clks IMX6QDL_CLK_CKO>;
 124                 VDDA-supply = <&reg_3p3v>;
 125                 VDDIO-supply = <&reg_3p3v>;
 126         };
 127 };
 128
 129 &i2c2 {
 130         clock-frequency = <100000>;
 131         pinctrl-names = "default";
 132         pinctrl-0 = <&pinctrl_i2c2>;
 133         status = "okay";
 134
 135         eeprom@57 {
 136                 compatible = "atmel,24c02";
 137                 reg = <0x57>;
 138         };
 139 };
 140
 141 &i2c3 {
 142         clock-frequency = <100000>;
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&pinctrl_i2c3>;
 145         status = "okay";
 146 };
 147
 148 &iomuxc {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_hog>;
 151
 152         imx6qdl-rex {
 153                 pinctrl_hog: hoggrp {
 154                         fsl,pins = <
 155                                 /* SGTL5000 sys_mclk */
 156                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x030b0
 157                         >;
 158                 };
 159
 160                 pinctrl_audmux: audmuxgrp {
 161                         fsl,pins = <
 162                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 163                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 164                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 165                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 166                         >;
 167                 };
 168
 169                 pinctrl_ecspi2: ecspi2grp {
 170                         fsl,pins = <
 171                                 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 172                                 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 173                                 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 174                                 /* CS */
 175                                 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26       0x000b1
 176                         >;
 177                 };
 178
 179                 pinctrl_ecspi3: ecspi3grp {
 180                         fsl,pins = <
 181                                 MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO     0x100b1
 182                                 MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI     0x100b1
 183                                 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK     0x100b1
 184                                 /* CS */
 185                                 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12      0x000b1
 186                         >;
 187                 };
 188
 189                 pinctrl_enet: enetgrp {
 190                         fsl,pins = <
 191                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 192                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 193                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 194                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 195                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 196                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 197                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 198                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 199                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 200                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 201                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 202                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 203                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 204                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 205                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 206                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 207                                 /* Phy reset */
 208                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x000b0
 209                         >;
 210                 };
 211
 212                 pinctrl_i2c1: i2c1grp {
 213                         fsl,pins = <
 214                                 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA          0x4001b8b1
 215                                 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL          0x4001b8b1
 216                         >;
 217                 };
 218
 219                 pinctrl_i2c2: i2c2grp {
 220                         fsl,pins = <
 221                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 222                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 223                         >;
 224                 };
 225
 226                 pinctrl_i2c3: i2c3grp {
 227                         fsl,pins = <
 228                                 MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
 229                                 MX6QDL_PAD_EIM_D18__I2C3_SDA            0x4001b8b1
 230                         >;
 231                 };
 232
 233                 pinctrl_led: ledgrp {
 234                         fsl,pins = <
 235                                 /* user led */
 236                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x80000000
 237                         >;
 238                 };
 239
 240                 pinctrl_uart1: uart1grp {
 241                         fsl,pins = <
 242                                 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 243                                 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 244                         >;
 245                 };
 246
 247                 pinctrl_uart2: uart2grp {
 248                         fsl,pins = <
 249                                 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 250                                 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 251                         >;
 252                 };
 253
 254                 pinctrl_usbh1: usbh1grp {
 255                         fsl,pins = <
 256                                 /* power enable, high active */
 257                                 MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x10b0
 258                         >;
 259                 };
 260
 261                 pinctrl_usbotg: usbotggrp {
 262                         fsl,pins = <
 263                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 264                                 MX6QDL_PAD_EIM_D21__USB_OTG_OC          0x1b0b0
 265                                 /* power enable, high active */
 266                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x10b0
 267                         >;
 268                 };
 269
 270                 pinctrl_usdhc2: usdhc2grp {
 271                         fsl,pins = <
 272                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 273                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 274                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 275                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 276                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 277                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 278                                 /* CD */
 279                                 MX6QDL_PAD_NANDF_D2__GPIO2_IO02         0x1b0b0
 280                                 /* WP */
 281                                 MX6QDL_PAD_NANDF_D3__GPIO2_IO03         0x1f0b0
 282                         >;
 283                 };
 284
 285                 pinctrl_usdhc3: usdhc3grp {
 286                         fsl,pins = <
 287                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 288                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 289                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 290                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 291                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 292                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 293                                 /* CD */
 294                                 MX6QDL_PAD_NANDF_D0__GPIO2_IO00         0x1b0b0
 295                                 /* WP */
 296                                 MX6QDL_PAD_NANDF_D1__GPIO2_IO01         0x1f0b0
 297                         >;
 298                 };
 299         };
 300 };
 301
 302 &ssi1 {
 303         status = "okay";
 304 };
 305
 306 &uart1 {
 307         pinctrl-names = "default";
 308         pinctrl-0 = <&pinctrl_uart1>;
 309         status = "okay";
 310 };
 311
 312 &uart2 {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <&pinctrl_uart2>;
 315         status = "okay";
 316 };
 317
 318 &usbh1 {
 319         vbus-supply = <&reg_usbh1_vbus>;
 320         pinctrl-names = "default";
 321         pinctrl-0 = <&pinctrl_usbh1>;
 322         status = "okay";
 323 };
 324
 325 &usbotg {
 326         vbus-supply = <&reg_usb_otg_vbus>;
 327         pinctrl-names = "default";
 328         pinctrl-0 = <&pinctrl_usbotg>;
 329         status = "okay";
 330 };
 331
 332 &usdhc2 {
 333         pinctrl-names = "default";
 334         pinctrl-0 = <&pinctrl_usdhc2>;
 335         bus-width = <4>;
 336         cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 337         wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 338         status = "okay";
 339 };
 340
 341 &usdhc3 {
 342         pinctrl-names = "default";
 343         pinctrl-0 = <&pinctrl_usdhc3>;
 344         bus-width = <4>;
 345         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 346         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 347         status = "okay";
 348 };