arch/arm/boot/dts/imx53.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2011 Freescale Semiconductor, Inc.
   4 // Copyright 2011 Linaro Ltd.
   5
   6 #include "imx53-pinfunc.h"
   7 #include <dt-bindings/clock/imx5-clock.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15         /*
  16          * The decompressor and also some bootloaders rely on a
  17          * pre-existing /chosen node to be available to insert the
  18          * command line and merge other ATAGS info.
  19          */
  20         chosen {};
  21
  22         aliases {
  23                 ethernet0 = &fec;
  24                 gpio0 = &gpio1;
  25                 gpio1 = &gpio2;
  26                 gpio2 = &gpio3;
  27                 gpio3 = &gpio4;
  28                 gpio4 = &gpio5;
  29                 gpio5 = &gpio6;
  30                 gpio6 = &gpio7;
  31                 i2c0 = &i2c1;
  32                 i2c1 = &i2c2;
  33                 i2c2 = &i2c3;
  34                 ipu0 = &ipu;
  35                 mmc0 = &esdhc1;
  36                 mmc1 = &esdhc2;
  37                 mmc2 = &esdhc3;
  38                 mmc3 = &esdhc4;
  39                 serial0 = &uart1;
  40                 serial1 = &uart2;
  41                 serial2 = &uart3;
  42                 serial3 = &uart4;
  43                 serial4 = &uart5;
  44                 spi0 = &ecspi1;
  45                 spi1 = &ecspi2;
  46                 spi2 = &cspi;
  47         };
  48
  49         cpus {
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 cpu0: cpu@0 {
  53                         device_type = "cpu";
  54                         compatible = "arm,cortex-a8";
  55                         reg = <0x0>;
  56                         clocks = <&clks IMX5_CLK_ARM>;
  57                         clock-latency = <61036>;
  58                         voltage-tolerance = <5>;
  59                         operating-points = <
  60                                 /* kHz */
  61                                  166666  850000
  62                                  400000  900000
  63                                  800000 1050000
  64                                 1000000 1200000
  65                                 1200000 1300000
  66                         >;
  67                 };
  68         };
  69
  70         display-subsystem {
  71                 compatible = "fsl,imx-display-subsystem";
  72                 ports = <&ipu_di0>, <&ipu_di1>;
  73         };
  74
  75         capture_subsystem {
  76                 compatible = "fsl,imx-capture-subsystem";
  77                 ports = <&ipu_csi0>, <&ipu_csi1>;
  78         };
  79
  80         tzic: tz-interrupt-controller@fffc000 {
  81                 compatible = "fsl,imx53-tzic", "fsl,tzic";
  82                 interrupt-controller;
  83                 #interrupt-cells = <1>;
  84                 reg = <0x0fffc000 0x4000>;
  85         };
  86
  87         clocks {
  88                 ckil {
  89                         compatible = "fsl,imx-ckil", "fixed-clock";
  90                         #clock-cells = <0>;
  91                         clock-frequency = <32768>;
  92                 };
  93
  94                 ckih1 {
  95                         compatible = "fsl,imx-ckih1", "fixed-clock";
  96                         #clock-cells = <0>;
  97                         clock-frequency = <22579200>;
  98                 };
  99
 100                 ckih2 {
 101                         compatible = "fsl,imx-ckih2", "fixed-clock";
 102                         #clock-cells = <0>;
 103                         clock-frequency = <0>;
 104                 };
 105
 106                 osc {
 107                         compatible = "fsl,imx-osc", "fixed-clock";
 108                         #clock-cells = <0>;
 109                         clock-frequency = <24000000>;
 110                 };
 111         };
 112
 113         pmu: pmu {
 114                 compatible = "arm,cortex-a8-pmu";
 115                 interrupt-parent = <&tzic>;
 116                 interrupts = <77>;
 117         };
 118
 119         usbphy0: usbphy-0 {
 120                 compatible = "usb-nop-xceiv";
 121                 clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 122                 clock-names = "main_clk";
 123                 #phy-cells = <0>;
 124                 status = "okay";
 125         };
 126
 127         usbphy1: usbphy-1 {
 128                 compatible = "usb-nop-xceiv";
 129                 clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 130                 clock-names = "main_clk";
 131                 #phy-cells = <0>;
 132                 status = "okay";
 133         };
 134
 135         soc {
 136                 #address-cells = <1>;
 137                 #size-cells = <1>;
 138                 compatible = "simple-bus";
 139                 interrupt-parent = <&tzic>;
 140                 ranges;
 141
 142                 sata: sata@10000000 {
 143                         compatible = "fsl,imx53-ahci";
 144                         reg = <0x10000000 0x1000>;
 145                         interrupts = <28>;
 146                         clocks = <&clks IMX5_CLK_SATA_GATE>,
 147                                  <&clks IMX5_CLK_SATA_REF>,
 148                                  <&clks IMX5_CLK_AHB>;
 149                         clock-names = "sata", "sata_ref", "ahb";
 150                         status = "disabled";
 151                 };
 152
 153                 ipu: ipu@18000000 {
 154                         #address-cells = <1>;
 155                         #size-cells = <0>;
 156                         compatible = "fsl,imx53-ipu";
 157                         reg = <0x18000000 0x08000000>;
 158                         interrupts = <11 10>;
 159                         clocks = <&clks IMX5_CLK_IPU_GATE>,
 160                                  <&clks IMX5_CLK_IPU_DI0_GATE>,
 161                                  <&clks IMX5_CLK_IPU_DI1_GATE>;
 162                         clock-names = "bus", "di0", "di1";
 163                         resets = <&src 2>;
 164
 165                         ipu_csi0: port@0 {
 166                                 reg = <0>;
 167
 168                                 ipu_csi0_from_parallel_sensor: endpoint {
 169                                 };
 170                         };
 171
 172                         ipu_csi1: port@1 {
 173                                 reg = <1>;
 174
 175                                 ipu_csi1_from_parallel_sensor: endpoint {
 176                                 };
 177                         };
 178
 179                         ipu_di0: port@2 {
 180                                 #address-cells = <1>;
 181                                 #size-cells = <0>;
 182                                 reg = <2>;
 183
 184                                 ipu_di0_disp0: endpoint@0 {
 185                                         reg = <0>;
 186                                 };
 187
 188                                 ipu_di0_lvds0: endpoint@1 {
 189                                         reg = <1>;
 190                                         remote-endpoint = <&lvds0_in>;
 191                                 };
 192                         };
 193
 194                         ipu_di1: port@3 {
 195                                 #address-cells = <1>;
 196                                 #size-cells = <0>;
 197                                 reg = <3>;
 198
 199                                 ipu_di1_disp1: endpoint@0 {
 200                                         reg = <0>;
 201                                 };
 202
 203                                 ipu_di1_lvds1: endpoint@1 {
 204                                         reg = <1>;
 205                                         remote-endpoint = <&lvds1_in>;
 206                                 };
 207
 208                                 ipu_di1_tve: endpoint@2 {
 209                                         reg = <2>;
 210                                         remote-endpoint = <&tve_in>;
 211                                 };
 212                         };
 213                 };
 214
 215                 gpu: gpu@30000000 {
 216                         compatible = "amd,imageon-200.0", "amd,imageon";
 217                         reg = <0x30000000 0x20000>;
 218                         reg-names = "kgsl_3d0_reg_memory";
 219                         interrupts = <12>;
 220                         interrupt-names = "kgsl_3d0_irq";
 221                         clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
 222                         clock-names = "core_clk", "mem_iface_clk";
 223                 };
 224
 225                 aips@50000000 { /* AIPS1 */
 226                         compatible = "fsl,aips-bus", "simple-bus";
 227                         #address-cells = <1>;
 228                         #size-cells = <1>;
 229                         reg = <0x50000000 0x10000000>;
 230                         ranges;
 231
 232                         spba@50000000 {
 233                                 compatible = "fsl,spba-bus", "simple-bus";
 234                                 #address-cells = <1>;
 235                                 #size-cells = <1>;
 236                                 reg = <0x50000000 0x40000>;
 237                                 ranges;
 238
 239                                 esdhc1: esdhc@50004000 {
 240                                         compatible = "fsl,imx53-esdhc";
 241                                         reg = <0x50004000 0x4000>;
 242                                         interrupts = <1>;
 243                                         clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
 244                                                  <&clks IMX5_CLK_DUMMY>,
 245                                                  <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 246                                         clock-names = "ipg", "ahb", "per";
 247                                         bus-width = <4>;
 248                                         status = "disabled";
 249                                 };
 250
 251                                 esdhc2: esdhc@50008000 {
 252                                         compatible = "fsl,imx53-esdhc";
 253                                         reg = <0x50008000 0x4000>;
 254                                         interrupts = <2>;
 255                                         clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
 256                                                  <&clks IMX5_CLK_DUMMY>,
 257                                                  <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 258                                         clock-names = "ipg", "ahb", "per";
 259                                         bus-width = <4>;
 260                                         status = "disabled";
 261                                 };
 262
 263                                 uart3: serial@5000c000 {
 264                                         compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 265                                         reg = <0x5000c000 0x4000>;
 266                                         interrupts = <33>;
 267                                         clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 268                                                  <&clks IMX5_CLK_UART3_PER_GATE>;
 269                                         clock-names = "ipg", "per";
 270                                         dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
 271                                         dma-names = "rx", "tx";
 272                                         status = "disabled";
 273                                 };
 274
 275                                 ecspi1: spi@50010000 {
 276                                         #address-cells = <1>;
 277                                         #size-cells = <0>;
 278                                         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 279                                         reg = <0x50010000 0x4000>;
 280                                         interrupts = <36>;
 281                                         clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
 282                                                  <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 283                                         clock-names = "ipg", "per";
 284                                         status = "disabled";
 285                                 };
 286
 287                                 ssi2: ssi@50014000 {
 288                                         #sound-dai-cells = <0>;
 289                                         compatible = "fsl,imx53-ssi",
 290                                                         "fsl,imx51-ssi",
 291                                                         "fsl,imx21-ssi";
 292                                         reg = <0x50014000 0x4000>;
 293                                         interrupts = <30>;
 294                                         clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
 295                                                  <&clks IMX5_CLK_SSI2_ROOT_GATE>;
 296                                         clock-names = "ipg", "baud";
 297                                         dmas = <&sdma 24 1 0>,
 298                                                <&sdma 25 1 0>;
 299                                         dma-names = "rx", "tx";
 300                                         fsl,fifo-depth = <15>;
 301                                         status = "disabled";
 302                                 };
 303
 304                                 esdhc3: esdhc@50020000 {
 305                                         compatible = "fsl,imx53-esdhc";
 306                                         reg = <0x50020000 0x4000>;
 307                                         interrupts = <3>;
 308                                         clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
 309                                                  <&clks IMX5_CLK_DUMMY>,
 310                                                  <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 311                                         clock-names = "ipg", "ahb", "per";
 312                                         bus-width = <4>;
 313                                         status = "disabled";
 314                                 };
 315
 316                                 esdhc4: esdhc@50024000 {
 317                                         compatible = "fsl,imx53-esdhc";
 318                                         reg = <0x50024000 0x4000>;
 319                                         interrupts = <4>;
 320                                         clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
 321                                                  <&clks IMX5_CLK_DUMMY>,
 322                                                  <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 323                                         clock-names = "ipg", "ahb", "per";
 324                                         bus-width = <4>;
 325                                         status = "disabled";
 326                                 };
 327                         };
 328
 329                         aipstz1: bridge@53f00000 {
 330                                 compatible = "fsl,imx53-aipstz";
 331                                 reg = <0x53f00000 0x60>;
 332                         };
 333
 334                         usbotg: usb@53f80000 {
 335                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 336                                 reg = <0x53f80000 0x0200>;
 337                                 interrupts = <18>;
 338                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 339                                 fsl,usbmisc = <&usbmisc 0>;
 340                                 fsl,usbphy = <&usbphy0>;
 341                                 status = "disabled";
 342                         };
 343
 344                         usbh1: usb@53f80200 {
 345                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 346                                 reg = <0x53f80200 0x0200>;
 347                                 interrupts = <14>;
 348                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 349                                 fsl,usbmisc = <&usbmisc 1>;
 350                                 fsl,usbphy = <&usbphy1>;
 351                                 dr_mode = "host";
 352                                 status = "disabled";
 353                         };
 354
 355                         usbh2: usb@53f80400 {
 356                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 357                                 reg = <0x53f80400 0x0200>;
 358                                 interrupts = <16>;
 359                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 360                                 fsl,usbmisc = <&usbmisc 2>;
 361                                 dr_mode = "host";
 362                                 status = "disabled";
 363                         };
 364
 365                         usbh3: usb@53f80600 {
 366                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 367                                 reg = <0x53f80600 0x0200>;
 368                                 interrupts = <17>;
 369                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 370                                 fsl,usbmisc = <&usbmisc 3>;
 371                                 dr_mode = "host";
 372                                 status = "disabled";
 373                         };
 374
 375                         usbmisc: usbmisc@53f80800 {
 376                                 #index-cells = <1>;
 377                                 compatible = "fsl,imx53-usbmisc";
 378                                 reg = <0x53f80800 0x200>;
 379                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 380                         };
 381
 382                         gpio1: gpio@53f84000 {
 383                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 384                                 reg = <0x53f84000 0x4000>;
 385                                 interrupts = <50 51>;
 386                                 gpio-controller;
 387                                 #gpio-cells = <2>;
 388                                 interrupt-controller;
 389                                 #interrupt-cells = <2>;
 390                         };
 391
 392                         gpio2: gpio@53f88000 {
 393                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 394                                 reg = <0x53f88000 0x4000>;
 395                                 interrupts = <52 53>;
 396                                 gpio-controller;
 397                                 #gpio-cells = <2>;
 398                                 interrupt-controller;
 399                                 #interrupt-cells = <2>;
 400                         };
 401
 402                         gpio3: gpio@53f8c000 {
 403                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 404                                 reg = <0x53f8c000 0x4000>;
 405                                 interrupts = <54 55>;
 406                                 gpio-controller;
 407                                 #gpio-cells = <2>;
 408                                 interrupt-controller;
 409                                 #interrupt-cells = <2>;
 410                         };
 411
 412                         gpio4: gpio@53f90000 {
 413                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 414                                 reg = <0x53f90000 0x4000>;
 415                                 interrupts = <56 57>;
 416                                 gpio-controller;
 417                                 #gpio-cells = <2>;
 418                                 interrupt-controller;
 419                                 #interrupt-cells = <2>;
 420                         };
 421
 422                         kpp: kpp@53f94000 {
 423                                 compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
 424                                 reg = <0x53f94000 0x4000>;
 425                                 interrupts = <60>;
 426                                 clocks = <&clks IMX5_CLK_DUMMY>;
 427                                 status = "disabled";
 428                         };
 429
 430                         wdog1: wdog@53f98000 {
 431                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 432                                 reg = <0x53f98000 0x4000>;
 433                                 interrupts = <58>;
 434                                 clocks = <&clks IMX5_CLK_DUMMY>;
 435                         };
 436
 437                         wdog2: wdog@53f9c000 {
 438                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 439                                 reg = <0x53f9c000 0x4000>;
 440                                 interrupts = <59>;
 441                                 clocks = <&clks IMX5_CLK_DUMMY>;
 442                                 status = "disabled";
 443                         };
 444
 445                         gpt: timer@53fa0000 {
 446                                 compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
 447                                 reg = <0x53fa0000 0x4000>;
 448                                 interrupts = <39>;
 449                                 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
 450                                          <&clks IMX5_CLK_GPT_HF_GATE>;
 451                                 clock-names = "ipg", "per";
 452                         };
 453
 454                         srtc: rtc@53fa4000 {
 455                                 compatible = "fsl,imx53-rtc";
 456                                 reg = <0x53fa4000 0x4000>;
 457                                 interrupts = <24>;
 458                                 clocks = <&clks IMX5_CLK_SRTC_GATE>;
 459                         };
 460
 461                         iomuxc: iomuxc@53fa8000 {
 462                                 compatible = "fsl,imx53-iomuxc";
 463                                 reg = <0x53fa8000 0x4000>;
 464                         };
 465
 466                         gpr: iomuxc-gpr@53fa8000 {
 467                                 compatible = "fsl,imx53-iomuxc-gpr", "syscon";
 468                                 reg = <0x53fa8000 0xc>;
 469                         };
 470
 471                         ldb: ldb@53fa8008 {
 472                                 #address-cells = <1>;
 473                                 #size-cells = <0>;
 474                                 compatible = "fsl,imx53-ldb";
 475                                 reg = <0x53fa8008 0x4>;
 476                                 gpr = <&gpr>;
 477                                 clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
 478                                          <&clks IMX5_CLK_LDB_DI1_SEL>,
 479                                          <&clks IMX5_CLK_IPU_DI0_SEL>,
 480                                          <&clks IMX5_CLK_IPU_DI1_SEL>,
 481                                          <&clks IMX5_CLK_LDB_DI0_GATE>,
 482                                          <&clks IMX5_CLK_LDB_DI1_GATE>;
 483                                 clock-names = "di0_pll", "di1_pll",
 484                                               "di0_sel", "di1_sel",
 485                                               "di0", "di1";
 486                                 status = "disabled";
 487
 488                                 lvds-channel@0 {
 489                                         #address-cells = <1>;
 490                                         #size-cells = <0>;
 491                                         reg = <0>;
 492                                         status = "disabled";
 493
 494                                         port@0 {
 495                                                 reg = <0>;
 496
 497                                                 lvds0_in: endpoint {
 498                                                         remote-endpoint = <&ipu_di0_lvds0>;
 499                                                 };
 500                                         };
 501
 502                                         port@2 {
 503                                                 reg = <2>;
 504                                         };
 505                                 };
 506
 507                                 lvds-channel@1 {
 508                                         #address-cells = <1>;
 509                                         #size-cells = <0>;
 510                                         reg = <1>;
 511                                         status = "disabled";
 512
 513                                         port@1 {
 514                                                 reg = <1>;
 515
 516                                                 lvds1_in: endpoint {
 517                                                         remote-endpoint = <&ipu_di1_lvds1>;
 518                                                 };
 519                                         };
 520
 521                                         port@2 {
 522                                                 reg = <2>;
 523                                         };
 524                                 };
 525                         };
 526
 527                         pwm1: pwm@53fb4000 {
 528                                 #pwm-cells = <2>;
 529                                 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 530                                 reg = <0x53fb4000 0x4000>;
 531                                 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
 532                                          <&clks IMX5_CLK_PWM1_HF_GATE>;
 533                                 clock-names = "ipg", "per";
 534                                 interrupts = <61>;
 535                         };
 536
 537                         pwm2: pwm@53fb8000 {
 538                                 #pwm-cells = <2>;
 539                                 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 540                                 reg = <0x53fb8000 0x4000>;
 541                                 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
 542                                          <&clks IMX5_CLK_PWM2_HF_GATE>;
 543                                 clock-names = "ipg", "per";
 544                                 interrupts = <94>;
 545                         };
 546
 547                         uart1: serial@53fbc000 {
 548                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 549                                 reg = <0x53fbc000 0x4000>;
 550                                 interrupts = <31>;
 551                                 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 552                                          <&clks IMX5_CLK_UART1_PER_GATE>;
 553                                 clock-names = "ipg", "per";
 554                                 dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
 555                                 dma-names = "rx", "tx";
 556                                 status = "disabled";
 557                         };
 558
 559                         uart2: serial@53fc0000 {
 560                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 561                                 reg = <0x53fc0000 0x4000>;
 562                                 interrupts = <32>;
 563                                 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 564                                          <&clks IMX5_CLK_UART2_PER_GATE>;
 565                                 clock-names = "ipg", "per";
 566                                 dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
 567                                 dma-names = "rx", "tx";
 568                                 status = "disabled";
 569                         };
 570
 571                         can1: can@53fc8000 {
 572                                 compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 573                                 reg = <0x53fc8000 0x4000>;
 574                                 interrupts = <82>;
 575                                 clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
 576                                          <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 577                                 clock-names = "ipg", "per";
 578                                 status = "disabled";
 579                         };
 580
 581                         can2: can@53fcc000 {
 582                                 compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 583                                 reg = <0x53fcc000 0x4000>;
 584                                 interrupts = <83>;
 585                                 clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
 586                                          <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 587                                 clock-names = "ipg", "per";
 588                                 status = "disabled";
 589                         };
 590
 591                         src: src@53fd0000 {
 592                                 compatible = "fsl,imx53-src", "fsl,imx51-src";
 593                                 reg = <0x53fd0000 0x4000>;
 594                                 #reset-cells = <1>;
 595                         };
 596
 597                         clks: ccm@53fd4000{
 598                                 compatible = "fsl,imx53-ccm";
 599                                 reg = <0x53fd4000 0x4000>;
 600                                 interrupts = <0 71 0x04 0 72 0x04>;
 601                                 #clock-cells = <1>;
 602                         };
 603
 604                         gpio5: gpio@53fdc000 {
 605                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 606                                 reg = <0x53fdc000 0x4000>;
 607                                 interrupts = <103 104>;
 608                                 gpio-controller;
 609                                 #gpio-cells = <2>;
 610                                 interrupt-controller;
 611                                 #interrupt-cells = <2>;
 612                         };
 613
 614                         gpio6: gpio@53fe0000 {
 615                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 616                                 reg = <0x53fe0000 0x4000>;
 617                                 interrupts = <105 106>;
 618                                 gpio-controller;
 619                                 #gpio-cells = <2>;
 620                                 interrupt-controller;
 621                                 #interrupt-cells = <2>;
 622                         };
 623
 624                         gpio7: gpio@53fe4000 {
 625                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 626                                 reg = <0x53fe4000 0x4000>;
 627                                 interrupts = <107 108>;
 628                                 gpio-controller;
 629                                 #gpio-cells = <2>;
 630                                 interrupt-controller;
 631                                 #interrupt-cells = <2>;
 632                         };
 633
 634                         i2c3: i2c@53fec000 {
 635                                 #address-cells = <1>;
 636                                 #size-cells = <0>;
 637                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 638                                 reg = <0x53fec000 0x4000>;
 639                                 interrupts = <64>;
 640                                 clocks = <&clks IMX5_CLK_I2C3_GATE>;
 641                                 status = "disabled";
 642                         };
 643
 644                         uart4: serial@53ff0000 {
 645                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 646                                 reg = <0x53ff0000 0x4000>;
 647                                 interrupts = <13>;
 648                                 clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
 649                                          <&clks IMX5_CLK_UART4_PER_GATE>;
 650                                 clock-names = "ipg", "per";
 651                                 dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
 652                                 dma-names = "rx", "tx";
 653                                 status = "disabled";
 654                         };
 655                 };
 656
 657                 aips@60000000 { /* AIPS2 */
 658                         compatible = "fsl,aips-bus", "simple-bus";
 659                         #address-cells = <1>;
 660                         #size-cells = <1>;
 661                         reg = <0x60000000 0x10000000>;
 662                         ranges;
 663
 664                         aipstz2: bridge@63f00000 {
 665                                 compatible = "fsl,imx53-aipstz";
 666                                 reg = <0x63f00000 0x60>;
 667                         };
 668
 669                         iim: iim@63f98000 {
 670                                 compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 671                                 reg = <0x63f98000 0x4000>;
 672                                 interrupts = <69>;
 673                                 clocks = <&clks IMX5_CLK_IIM_GATE>;
 674                         };
 675
 676                         uart5: serial@63f90000 {
 677                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 678                                 reg = <0x63f90000 0x4000>;
 679                                 interrupts = <86>;
 680                                 clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
 681                                          <&clks IMX5_CLK_UART5_PER_GATE>;
 682                                 clock-names = "ipg", "per";
 683                                 dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
 684                                 dma-names = "rx", "tx";
 685                                 status = "disabled";
 686                         };
 687
 688                         tigerp: tigerp@63fa0000 {
 689                                 compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
 690                                 reg = <0x63fa0000 0x28>;
 691                         };
 692
 693                         owire: owire@63fa4000 {
 694                                 compatible = "fsl,imx53-owire", "fsl,imx21-owire";
 695                                 reg = <0x63fa4000 0x4000>;
 696                                 clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 697                                 status = "disabled";
 698                         };
 699
 700                         ecspi2: spi@63fac000 {
 701                                 #address-cells = <1>;
 702                                 #size-cells = <0>;
 703                                 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 704                                 reg = <0x63fac000 0x4000>;
 705                                 interrupts = <37>;
 706                                 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
 707                                          <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 708                                 clock-names = "ipg", "per";
 709                                 status = "disabled";
 710                         };
 711
 712                         sdma: sdma@63fb0000 {
 713                                 compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 714                                 reg = <0x63fb0000 0x4000>;
 715                                 interrupts = <6>;
 716                                 clocks = <&clks IMX5_CLK_SDMA_GATE>,
 717                                          <&clks IMX5_CLK_AHB>;
 718                                 clock-names = "ipg", "ahb";
 719                                 #dma-cells = <3>;
 720                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 721                         };
 722
 723                         cspi: spi@63fc0000 {
 724                                 #address-cells = <1>;
 725                                 #size-cells = <0>;
 726                                 compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 727                                 reg = <0x63fc0000 0x4000>;
 728                                 interrupts = <38>;
 729                                 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
 730                                          <&clks IMX5_CLK_CSPI_IPG_GATE>;
 731                                 clock-names = "ipg", "per";
 732                                 status = "disabled";
 733                         };
 734
 735                         i2c2: i2c@63fc4000 {
 736                                 #address-cells = <1>;
 737                                 #size-cells = <0>;
 738                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 739                                 reg = <0x63fc4000 0x4000>;
 740                                 interrupts = <63>;
 741                                 clocks = <&clks IMX5_CLK_I2C2_GATE>;
 742                                 status = "disabled";
 743                         };
 744
 745                         i2c1: i2c@63fc8000 {
 746                                 #address-cells = <1>;
 747                                 #size-cells = <0>;
 748                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 749                                 reg = <0x63fc8000 0x4000>;
 750                                 interrupts = <62>;
 751                                 clocks = <&clks IMX5_CLK_I2C1_GATE>;
 752                                 status = "disabled";
 753                         };
 754
 755                         ssi1: ssi@63fcc000 {
 756                                 #sound-dai-cells = <0>;
 757                                 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 758                                                 "fsl,imx21-ssi";
 759                                 reg = <0x63fcc000 0x4000>;
 760                                 interrupts = <29>;
 761                                 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
 762                                          <&clks IMX5_CLK_SSI1_ROOT_GATE>;
 763                                 clock-names = "ipg", "baud";
 764                                 dmas = <&sdma 28 0 0>,
 765                                        <&sdma 29 0 0>;
 766                                 dma-names = "rx", "tx";
 767                                 fsl,fifo-depth = <15>;
 768                                 status = "disabled";
 769                         };
 770
 771                         audmux: audmux@63fd0000 {
 772                                 compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 773                                 reg = <0x63fd0000 0x4000>;
 774                                 status = "disabled";
 775                         };
 776
 777                         nfc: nand@63fdb000 {
 778                                 compatible = "fsl,imx53-nand";
 779                                 reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 780                                 interrupts = <8>;
 781                                 clocks = <&clks IMX5_CLK_NFC_GATE>;
 782                                 status = "disabled";
 783                         };
 784
 785                         ssi3: ssi@63fe8000 {
 786                                 #sound-dai-cells = <0>;
 787                                 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 788                                                 "fsl,imx21-ssi";
 789                                 reg = <0x63fe8000 0x4000>;
 790                                 interrupts = <96>;
 791                                 clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
 792                                          <&clks IMX5_CLK_SSI3_ROOT_GATE>;
 793                                 clock-names = "ipg", "baud";
 794                                 dmas = <&sdma 46 0 0>,
 795                                        <&sdma 47 0 0>;
 796                                 dma-names = "rx", "tx";
 797                                 fsl,fifo-depth = <15>;
 798                                 status = "disabled";
 799                         };
 800
 801                         fec: ethernet@63fec000 {
 802                                 compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 803                                 reg = <0x63fec000 0x4000>;
 804                                 interrupts = <87>;
 805                                 clocks = <&clks IMX5_CLK_FEC_GATE>,
 806                                          <&clks IMX5_CLK_FEC_GATE>,
 807                                          <&clks IMX5_CLK_FEC_GATE>;
 808                                 clock-names = "ipg", "ahb", "ptp";
 809                                 status = "disabled";
 810                         };
 811
 812                         tve: tve@63ff0000 {
 813                                 compatible = "fsl,imx53-tve";
 814                                 reg = <0x63ff0000 0x1000>;
 815                                 interrupts = <92>;
 816                                 clocks = <&clks IMX5_CLK_TVE_GATE>,
 817                                          <&clks IMX5_CLK_IPU_DI1_SEL>;
 818                                 clock-names = "tve", "di_sel";
 819                                 status = "disabled";
 820
 821                                 port {
 822                                         tve_in: endpoint {
 823                                                 remote-endpoint = <&ipu_di1_tve>;
 824                                         };
 825                                 };
 826                         };
 827
 828                         vpu: vpu@63ff4000 {
 829                                 compatible = "fsl,imx53-vpu", "cnm,coda7541";
 830                                 reg = <0x63ff4000 0x1000>;
 831                                 interrupts = <9>;
 832                                 clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
 833                                          <&clks IMX5_CLK_VPU_GATE>;
 834                                 clock-names = "per", "ahb";
 835                                 resets = <&src 1>;
 836                                 iram = <&ocram>;
 837                         };
 838
 839                         sahara: crypto@63ff8000 {
 840                                 compatible = "fsl,imx53-sahara";
 841                                 reg = <0x63ff8000 0x4000>;
 842                                 interrupts = <19 20>;
 843                                 clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
 844                                          <&clks IMX5_CLK_SAHARA_IPG_GATE>;
 845                                 clock-names = "ipg", "ahb";
 846                         };
 847                 };
 848
 849                 ocram: sram@f8000000 {
 850                         compatible = "mmio-sram";
 851                         reg = <0xf8000000 0x20000>;
 852                         clocks = <&clks IMX5_CLK_OCRAM>;
 853                 };
 854         };
 855 };