arch/arm/boot/dts/imx53-smd.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2011 Freescale Semiconductor, Inc.
   4 // Copyright 2011 Linaro Ltd.
   5
   6 /dts-v1/;
   7 #include <dt-bindings/input/input.h>
   8 #include "imx53.dtsi"
   9
  10 / {
  11         model = "Freescale i.MX53 Smart Mobile Reference Design Board";
  12         compatible = "fsl,imx53-smd", "fsl,imx53";
  13
  14         memory@70000000 {
  15                 device_type = "memory";
  16                 reg = <0x70000000 0x40000000>;
  17         };
  18
  19         gpio-keys {
  20                 compatible = "gpio-keys";
  21
  22                 volume-up {
  23                         label = "Volume Up";
  24                         gpios = <&gpio2 14 0>;
  25                         linux,code = <KEY_VOLUMEUP>;
  26                 };
  27
  28                 volume-down {
  29                         label = "Volume Down";
  30                         gpios = <&gpio2 15 0>;
  31                         linux,code = <KEY_VOLUMEDOWN>;
  32                 };
  33         };
  34 };
  35
  36 &esdhc1 {
  37         pinctrl-names = "default";
  38         pinctrl-0 = <&pinctrl_esdhc1>;
  39         cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
  40         wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
  41         status = "okay";
  42 };
  43
  44 &esdhc2 {
  45         pinctrl-names = "default";
  46         pinctrl-0 = <&pinctrl_esdhc2>;
  47         non-removable;
  48         status = "okay";
  49 };
  50
  51 &uart3 {
  52         pinctrl-names = "default";
  53         pinctrl-0 = <&pinctrl_uart3>;
  54         uart-has-rtscts;
  55         status = "okay";
  56 };
  57
  58 &ecspi1 {
  59         pinctrl-names = "default";
  60         pinctrl-0 = <&pinctrl_ecspi1>;
  61         cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
  62         status = "okay";
  63
  64         zigbee: mc1323@0 {
  65                 compatible = "fsl,mc1323";
  66                 spi-max-frequency = <8000000>;
  67                 reg = <0>;
  68         };
  69
  70         flash: m25p32@1 {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
  74                 spi-max-frequency = <20000000>;
  75                 reg = <1>;
  76
  77                 partition@0 {
  78                         label = "U-Boot";
  79                         reg = <0x0 0x40000>;
  80                         read-only;
  81                 };
  82
  83                 partition@40000 {
  84                         label = "Kernel";
  85                         reg = <0x40000 0x3c0000>;
  86                 };
  87         };
  88 };
  89
  90 &esdhc3 {
  91         pinctrl-names = "default";
  92         pinctrl-0 = <&pinctrl_esdhc3>;
  93         non-removable;
  94         status = "okay";
  95 };
  96
  97 &iomuxc {
  98         pinctrl-names = "default";
  99         pinctrl-0 = <&pinctrl_hog>;
 100
 101         imx53-smd {
 102                 pinctrl_hog: hoggrp {
 103                         fsl,pins = <
 104                                 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
 105                                 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
 106                                 MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
 107                                 MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
 108                                 MX53_PAD_EIM_D19__GPIO3_19     0x80000000
 109                                 MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
 110                                 MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
 111                         >;
 112                 };
 113
 114                 pinctrl_ecspi1: ecspi1grp {
 115                         fsl,pins = <
 116                                 MX53_PAD_EIM_D16__ECSPI1_SCLK           0x80000000
 117                                 MX53_PAD_EIM_D17__ECSPI1_MISO           0x80000000
 118                                 MX53_PAD_EIM_D18__ECSPI1_MOSI           0x80000000
 119                         >;
 120                 };
 121
 122                 pinctrl_esdhc1: esdhc1grp {
 123                         fsl,pins = <
 124                                 MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
 125                                 MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
 126                                 MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
 127                                 MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
 128                                 MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
 129                                 MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
 130                         >;
 131                 };
 132
 133                 pinctrl_esdhc2: esdhc2grp {
 134                         fsl,pins = <
 135                                 MX53_PAD_SD2_CMD__ESDHC2_CMD            0x1d5
 136                                 MX53_PAD_SD2_CLK__ESDHC2_CLK            0x1d5
 137                                 MX53_PAD_SD2_DATA0__ESDHC2_DAT0         0x1d5
 138                                 MX53_PAD_SD2_DATA1__ESDHC2_DAT1         0x1d5
 139                                 MX53_PAD_SD2_DATA2__ESDHC2_DAT2         0x1d5
 140                                 MX53_PAD_SD2_DATA3__ESDHC2_DAT3         0x1d5
 141                         >;
 142                 };
 143
 144                 pinctrl_esdhc3: esdhc3grp {
 145                         fsl,pins = <
 146                                 MX53_PAD_PATA_DATA8__ESDHC3_DAT0        0x1d5
 147                                 MX53_PAD_PATA_DATA9__ESDHC3_DAT1        0x1d5
 148                                 MX53_PAD_PATA_DATA10__ESDHC3_DAT2       0x1d5
 149                                 MX53_PAD_PATA_DATA11__ESDHC3_DAT3       0x1d5
 150                                 MX53_PAD_PATA_DATA0__ESDHC3_DAT4        0x1d5
 151                                 MX53_PAD_PATA_DATA1__ESDHC3_DAT5        0x1d5
 152                                 MX53_PAD_PATA_DATA2__ESDHC3_DAT6        0x1d5
 153                                 MX53_PAD_PATA_DATA3__ESDHC3_DAT7        0x1d5
 154                                 MX53_PAD_PATA_RESET_B__ESDHC3_CMD       0x1d5
 155                                 MX53_PAD_PATA_IORDY__ESDHC3_CLK         0x1d5
 156                         >;
 157                 };
 158
 159                 pinctrl_fec: fecgrp {
 160                         fsl,pins = <
 161                                 MX53_PAD_FEC_MDC__FEC_MDC               0x80000000
 162                                 MX53_PAD_FEC_MDIO__FEC_MDIO             0x80000000
 163                                 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x80000000
 164                                 MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x80000000
 165                                 MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x80000000
 166                                 MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x80000000
 167                                 MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x80000000
 168                                 MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x80000000
 169                                 MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x80000000
 170                                 MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x80000000
 171                         >;
 172                 };
 173
 174                 pinctrl_i2c1: i2c1grp {
 175                         fsl,pins = <
 176                                 MX53_PAD_CSI0_DAT8__I2C1_SDA            0xc0000000
 177                                 MX53_PAD_CSI0_DAT9__I2C1_SCL            0xc0000000
 178                         >;
 179                 };
 180
 181                 pinctrl_i2c2: i2c2grp {
 182                         fsl,pins = <
 183                                 MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
 184                                 MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
 185                         >;
 186                 };
 187
 188                 pinctrl_uart1: uart1grp {
 189                         fsl,pins = <
 190                                 MX53_PAD_CSI0_DAT10__UART1_TXD_MUX      0x1e4
 191                                 MX53_PAD_CSI0_DAT11__UART1_RXD_MUX      0x1e4
 192                         >;
 193                 };
 194
 195                 pinctrl_uart2: uart2grp {
 196                         fsl,pins = <
 197                                 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX  0x1e4
 198                                 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX      0x1e4
 199                         >;
 200                 };
 201
 202                 pinctrl_uart3: uart3grp {
 203                         fsl,pins = <
 204                                 MX53_PAD_PATA_CS_0__UART3_TXD_MUX       0x1e4
 205                                 MX53_PAD_PATA_CS_1__UART3_RXD_MUX       0x1e4
 206                                 MX53_PAD_PATA_DA_1__UART3_CTS           0x1e4
 207                                 MX53_PAD_PATA_DA_2__UART3_RTS           0x1e4
 208                         >;
 209                 };
 210         };
 211 };
 212
 213 &uart1 {
 214         pinctrl-names = "default";
 215         pinctrl-0 = <&pinctrl_uart1>;
 216         status = "okay";
 217 };
 218
 219 &uart2 {
 220         pinctrl-names = "default";
 221         pinctrl-0 = <&pinctrl_uart2>;
 222         status = "okay";
 223 };
 224
 225 &i2c2 {
 226         pinctrl-names = "default";
 227         pinctrl-0 = <&pinctrl_i2c2>;
 228         status = "okay";
 229
 230         codec: sgtl5000@a {
 231                 compatible = "fsl,sgtl5000";
 232                 reg = <0x0a>;
 233         };
 234
 235         magnetometer: mag3110@e {
 236                 compatible = "fsl,mag3110";
 237                 reg = <0x0e>;
 238         };
 239
 240         touchkey: mpr121@5a {
 241                 compatible = "fsl,mpr121";
 242                 reg = <0x5a>;
 243         };
 244 };
 245
 246 &i2c1 {
 247         pinctrl-names = "default";
 248         pinctrl-0 = <&pinctrl_i2c1>;
 249         status = "okay";
 250
 251         accelerometer: mma8450@1c {
 252                 compatible = "fsl,mma8450";
 253                 reg = <0x1c>;
 254         };
 255
 256         camera: ov5642@3c {
 257                 compatible = "ovti,ov5642";
 258                 reg = <0x3c>;
 259         };
 260
 261         pmic: dialog@48 {
 262                 compatible = "dlg,da9053", "dlg,da9052";
 263                 reg = <0x48>;
 264         };
 265 };
 266
 267 &fec {
 268         pinctrl-names = "default";
 269         pinctrl-0 = <&pinctrl_fec>;
 270         phy-mode = "rmii";
 271         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 272         status = "okay";
 273 };