1 // SPDX-License-Identifier: GPL-2.0
3 * Google Peach Pit Rev 6+ board device tree source
5 * Copyright (c) 2014 Google, Inc
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
15 #include "exynos5420.dtsi"
16 #include "exynos5420-cpus.dtsi"
19 model = "Google Peach Pit Rev 6+";
21 compatible = "google,pit-rev16",
22 "google,pit-rev15", "google,pit-rev14",
23 "google,pit-rev13", "google,pit-rev12",
24 "google,pit-rev11", "google,pit-rev10",
25 "google,pit-rev9", "google,pit-rev8",
26 "google,pit-rev7", "google,pit-rev6",
27 "google,pit", "google,peach","samsung,exynos5420",
31 /* Assign 20 so we don't get confused w/ builtin ones */
35 backlight: backlight {
36 compatible = "pwm-backlight";
37 pwms = <&pwm 0 1000000 0>;
38 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
39 default-brightness-level = <7>;
40 power-supply = <&tps65090_fet1>;
41 pinctrl-0 = <&pwm0_out>;
42 pinctrl-names = "default";
46 stdout-path = "serial3:115200n8";
51 compatible = "samsung,exynos5420-oscclk";
52 clock-frequency = <24000000>;
57 compatible = "gpio-keys";
59 pinctrl-names = "default";
60 pinctrl-0 = <&power_key_irq &lid_irq>;
64 gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_POWER>;
71 gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
72 linux,input-type = <5>; /* EV_SW */
73 linux,code = <0>; /* SW_LID */
74 debounce-interval = <1>;
80 device_type = "memory";
81 reg = <0x20000000 0x80000000>;
85 compatible = "google,snow-audio-max98090";
87 samsung,model = "Peach-Pit-I2S-MAX98090";
88 samsung,i2s-controller = <&i2s0>;
89 samsung,audio-codec = <&max98090>;
92 sound-dai = <&i2s0 0>;
96 sound-dai = <&max98090>, <&hdmi>;
100 usb300_vbus_reg: regulator-usb300 {
101 compatible = "regulator-fixed";
102 regulator-name = "P5.0V_USB3CON0";
103 regulator-min-microvolt = <5000000>;
104 regulator-max-microvolt = <5000000>;
105 gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&usb300_vbus_en>;
111 usb301_vbus_reg: regulator-usb301 {
112 compatible = "regulator-fixed";
113 regulator-name = "P5.0V_USB3CON1";
114 regulator-min-microvolt = <5000000>;
115 regulator-max-microvolt = <5000000>;
116 gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&usb301_vbus_en>;
122 vbat: fixed-regulator {
123 compatible = "regulator-fixed";
124 regulator-name = "vbat-supply";
130 compatible = "auo,b116xw03";
131 power-supply = <&tps65090_fet6>;
132 backlight = <&backlight>;
136 remote-endpoint = <&bridge_out>;
141 mmc1_pwrseq: mmc1_pwrseq {
142 compatible = "mmc-pwrseq-simple";
143 reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
144 clocks = <&max77802 MAX77802_CLK_32K_CP>;
145 clock-names = "ext_clock";
151 vdd-supply = <&ldo9_reg>;
155 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
156 assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
160 cpu-supply = <&buck2_reg>;
164 cpu-supply = <&buck6_reg>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&dp_hpd_gpio>;
171 samsung,color-space = <0>;
172 samsung,color-depth = <1>;
173 samsung,link-rate = <0x06>;
174 samsung,lane-count = <2>;
175 hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
180 remote-endpoint = <&bridge_in>;
193 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&hdmi_hpd_irq>;
198 hdmi-en-supply = <&tps65090_fet7>;
199 vdd-supply = <&ldo8_reg>;
200 vdd_osc-supply = <&ldo10_reg>;
201 vdd_pll-supply = <&ldo8_reg>;
206 clock-frequency = <400000>;
208 max77802: max77802-pmic@9 {
209 compatible = "maxim,max77802";
210 interrupt-parent = <&gpx3>;
211 interrupts = <1 IRQ_TYPE_NONE>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
214 <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
219 inb1-supply = <&tps65090_dcdc2>;
220 inb2-supply = <&tps65090_dcdc1>;
221 inb3-supply = <&tps65090_dcdc2>;
222 inb4-supply = <&tps65090_dcdc2>;
223 inb5-supply = <&tps65090_dcdc1>;
224 inb6-supply = <&tps65090_dcdc2>;
225 inb7-supply = <&tps65090_dcdc1>;
226 inb8-supply = <&tps65090_dcdc1>;
227 inb9-supply = <&tps65090_dcdc1>;
228 inb10-supply = <&tps65090_dcdc1>;
230 inl1-supply = <&buck5_reg>;
231 inl2-supply = <&buck7_reg>;
232 inl3-supply = <&buck9_reg>;
233 inl4-supply = <&buck9_reg>;
234 inl5-supply = <&buck9_reg>;
235 inl6-supply = <&tps65090_dcdc2>;
236 inl7-supply = <&buck9_reg>;
237 inl9-supply = <&tps65090_dcdc2>;
238 inl10-supply = <&buck7_reg>;
242 regulator-name = "vdd_mif";
243 regulator-min-microvolt = <800000>;
244 regulator-max-microvolt = <1300000>;
247 regulator-ramp-delay = <12500>;
248 regulator-state-mem {
249 regulator-off-in-suspend;
254 regulator-name = "vdd_arm";
255 regulator-min-microvolt = <800000>;
256 regulator-max-microvolt = <1500000>;
259 regulator-ramp-delay = <12500>;
260 regulator-state-mem {
261 regulator-off-in-suspend;
266 regulator-name = "vdd_int";
267 regulator-min-microvolt = <800000>;
268 regulator-max-microvolt = <1400000>;
271 regulator-ramp-delay = <12500>;
272 regulator-state-mem {
273 regulator-off-in-suspend;
278 regulator-name = "vdd_g3d";
279 regulator-min-microvolt = <700000>;
280 regulator-max-microvolt = <1400000>;
283 regulator-ramp-delay = <12500>;
284 regulator-state-mem {
285 regulator-off-in-suspend;
290 regulator-name = "vdd_1v2";
291 regulator-min-microvolt = <1200000>;
292 regulator-max-microvolt = <1200000>;
294 regulator-state-mem {
295 regulator-off-in-suspend;
300 regulator-name = "vdd_kfc";
301 regulator-min-microvolt = <800000>;
302 regulator-max-microvolt = <1500000>;
305 regulator-ramp-delay = <12500>;
306 regulator-state-mem {
307 regulator-off-in-suspend;
312 regulator-name = "vdd_1v35";
313 regulator-min-microvolt = <1350000>;
314 regulator-max-microvolt = <1350000>;
316 regulator-state-mem {
317 regulator-on-in-suspend;
322 regulator-name = "vdd_emmc";
323 regulator-min-microvolt = <2850000>;
324 regulator-max-microvolt = <2850000>;
327 regulator-state-mem {
328 regulator-off-in-suspend;
333 regulator-name = "vdd_2v";
334 regulator-min-microvolt = <2000000>;
335 regulator-max-microvolt = <2000000>;
337 regulator-state-mem {
338 regulator-on-in-suspend;
343 regulator-name = "vdd_1v8";
344 regulator-min-microvolt = <1800000>;
345 regulator-max-microvolt = <1800000>;
347 regulator-state-mem {
348 regulator-on-in-suspend;
353 regulator-name = "vdd_1v0";
354 regulator-min-microvolt = <1000000>;
355 regulator-max-microvolt = <1000000>;
357 regulator-state-mem {
358 regulator-on-in-suspend;
359 regulator-mode = <MAX77802_OPMODE_LP>;
364 regulator-name = "vdd_1v2_2";
365 regulator-min-microvolt = <1200000>;
366 regulator-max-microvolt = <1200000>;
370 regulator-name = "vdd_1v8_3";
371 regulator-min-microvolt = <1800000>;
372 regulator-max-microvolt = <1800000>;
374 regulator-state-mem {
375 regulator-on-in-suspend;
376 regulator-mode = <MAX77802_OPMODE_LP>;
380 vqmmc_sdcard: ldo4_reg: LDO4 {
381 regulator-name = "vdd_sd";
382 regulator-min-microvolt = <1800000>;
383 regulator-max-microvolt = <2800000>;
385 regulator-state-mem {
386 regulator-off-in-suspend;
391 regulator-name = "vdd_1v8_5";
392 regulator-min-microvolt = <1800000>;
393 regulator-max-microvolt = <1800000>;
395 regulator-state-mem {
396 regulator-off-in-suspend;
401 regulator-name = "vdd_1v8_6";
402 regulator-min-microvolt = <1800000>;
403 regulator-max-microvolt = <1800000>;
405 regulator-state-mem {
406 regulator-off-in-suspend;
411 regulator-name = "vdd_1v8_7";
412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvolt = <1800000>;
417 regulator-name = "vdd_ldo8";
418 regulator-min-microvolt = <1000000>;
419 regulator-max-microvolt = <1000000>;
421 regulator-state-mem {
422 regulator-off-in-suspend;
427 regulator-name = "vdd_ldo9";
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
430 regulator-state-mem {
431 regulator-on-in-suspend;
432 regulator-mode = <MAX77802_OPMODE_LP>;
437 regulator-name = "vdd_ldo10";
438 regulator-min-microvolt = <1800000>;
439 regulator-max-microvolt = <1800000>;
440 regulator-state-mem {
441 regulator-off-in-suspend;
446 regulator-name = "vdd_ldo11";
447 regulator-min-microvolt = <1800000>;
448 regulator-max-microvolt = <1800000>;
450 regulator-state-mem {
451 regulator-on-in-suspend;
452 regulator-mode = <MAX77802_OPMODE_LP>;
457 regulator-name = "vdd_ldo12";
458 regulator-min-microvolt = <3000000>;
459 regulator-max-microvolt = <3000000>;
461 regulator-state-mem {
462 regulator-off-in-suspend;
467 regulator-name = "vdd_ldo13";
468 regulator-min-microvolt = <1800000>;
469 regulator-max-microvolt = <1800000>;
471 regulator-state-mem {
472 regulator-on-in-suspend;
473 regulator-mode = <MAX77802_OPMODE_LP>;
478 regulator-name = "vdd_ldo14";
479 regulator-min-microvolt = <1800000>;
480 regulator-max-microvolt = <1800000>;
482 regulator-state-mem {
483 regulator-off-in-suspend;
488 regulator-name = "vdd_ldo15";
489 regulator-min-microvolt = <1000000>;
490 regulator-max-microvolt = <1000000>;
492 regulator-state-mem {
493 regulator-off-in-suspend;
498 regulator-name = "vdd_g3ds";
499 regulator-min-microvolt = <900000>;
500 regulator-max-microvolt = <1400000>;
502 regulator-state-mem {
503 regulator-off-in-suspend;
508 regulator-name = "ldo_18";
509 regulator-min-microvolt = <1800000>;
510 regulator-max-microvolt = <1800000>;
514 regulator-name = "ldo_19";
515 regulator-min-microvolt = <1800000>;
516 regulator-max-microvolt = <1800000>;
520 regulator-name = "ldo_20";
521 regulator-min-microvolt = <1800000>;
522 regulator-max-microvolt = <1800000>;
527 regulator-name = "ldo_21";
528 regulator-min-microvolt = <2800000>;
529 regulator-max-microvolt = <2800000>;
533 regulator-name = "ldo_23";
534 regulator-min-microvolt = <3300000>;
535 regulator-max-microvolt = <3300000>;
538 regulator-name = "ldo_24";
539 regulator-min-microvolt = <2800000>;
540 regulator-max-microvolt = <2800000>;
544 regulator-name = "ldo_25";
545 regulator-min-microvolt = <3300000>;
546 regulator-max-microvolt = <3300000>;
550 regulator-name = "ldo_26";
551 regulator-min-microvolt = <1200000>;
552 regulator-max-microvolt = <1200000>;
556 regulator-name = "ldo_27";
557 regulator-min-microvolt = <1200000>;
558 regulator-max-microvolt = <1200000>;
562 regulator-name = "ldo_28";
563 regulator-min-microvolt = <1800000>;
564 regulator-max-microvolt = <1800000>;
568 regulator-name = "ldo_29";
569 regulator-min-microvolt = <1800000>;
570 regulator-max-microvolt = <1800000>;
574 regulator-name = "vdd_mifs";
575 regulator-min-microvolt = <1000000>;
576 regulator-max-microvolt = <1000000>;
578 regulator-state-mem {
579 regulator-off-in-suspend;
584 regulator-name = "ldo_32";
585 regulator-min-microvolt = <3000000>;
586 regulator-max-microvolt = <3000000>;
590 regulator-name = "ldo_33";
591 regulator-min-microvolt = <2800000>;
592 regulator-max-microvolt = <2800000>;
596 regulator-name = "ldo_34";
597 regulator-min-microvolt = <3000000>;
598 regulator-max-microvolt = <3000000>;
602 regulator-name = "ldo_35";
603 regulator-min-microvolt = <1200000>;
604 regulator-max-microvolt = <1200000>;
612 clock-frequency = <400000>;
615 compatible = "maxim,max98090";
617 interrupts = <2 IRQ_TYPE_NONE>;
618 interrupt-parent = <&gpx0>;
619 pinctrl-names = "default";
620 pinctrl-0 = <&max98090_irq>;
621 clocks = <&pmu_system_controller 0>;
622 clock-names = "mclk";
623 #sound-dai-cells = <0>;
627 compatible = "isil,isl29018";
629 vcc-supply = <&tps65090_fet5>;
632 ps8625: lvds-bridge@48 {
633 compatible = "parade,ps8625";
635 sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
636 reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
641 #address-cells = <1>;
647 bridge_out: endpoint {
648 remote-endpoint = <&panel_in>;
655 bridge_in: endpoint {
656 remote-endpoint = <&dp_out>;
666 clock-frequency = <333000>;
670 compatible = "atmel,maxtouch";
672 interrupt-parent = <&gpx1>;
673 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
675 pinctrl-names = "default";
676 pinctrl-0 = <&trackpad_irq>;
677 linux,gpio-keymap = <KEY_RESERVED
679 KEY_RESERVED /* GPIO0 */
680 KEY_RESERVED /* GPIO1 */
681 KEY_RESERVED /* GPIO2 */
682 BTN_LEFT>; /* GPIO3 */
688 clock-frequency = <400000>;
691 compatible = "infineon,slb9645tt";
694 /* Unused irq; but still need to configure the pins */
695 pinctrl-names = "default";
696 pinctrl-0 = <&tpm_irq>;
702 samsung,i2c-sda-delay = <100>;
703 samsung,i2c-max-bus-freq = <66000>;
704 samsung,i2c-slave-addr = <0x50>;
708 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
709 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
723 clock-frequency = <400000000>;
724 samsung,dw-mshc-ciu-div = <3>;
725 samsung,dw-mshc-sdr-timing = <0 4>;
726 samsung,dw-mshc-ddr-timing = <0 2>;
727 samsung,dw-mshc-hs400-timing = <0 2>;
728 samsung,read-strobe-delay = <90>;
729 pinctrl-names = "default";
730 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
734 /* WiFi SDIO module */
739 keep-power-in-suspend;
740 clock-frequency = <400000000>;
741 samsung,dw-mshc-ciu-div = <1>;
742 samsung,dw-mshc-sdr-timing = <0 1>;
743 samsung,dw-mshc-ddr-timing = <0 2>;
744 pinctrl-names = "default";
745 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
746 <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
749 mmc-pwrseq = <&mmc1_pwrseq>;
750 vqmmc-supply = <&buck10_reg>;
757 card-detect-delay = <200>;
758 clock-frequency = <400000000>;
759 samsung,dw-mshc-ciu-div = <3>;
760 samsung,dw-mshc-sdr-timing = <2 3>;
761 samsung,dw-mshc-ddr-timing = <1 2>;
762 pinctrl-names = "default";
763 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
769 pinctrl-names = "default";
770 pinctrl-0 = <&mask_tpm_reset>;
773 samsung,pins = "gpx0-0";
774 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
775 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
776 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
779 max98090_irq: max98090-irq {
780 samsung,pins = "gpx0-2";
781 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
782 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
783 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
786 /* We need GPX0_6 to be low at sleep time; just keep it low always */
787 mask_tpm_reset: mask-tpm-reset {
788 samsung,pins = "gpx0-6";
789 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
790 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
791 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
792 samsung,pin-val = <0>;
796 samsung,pins = "gpx1-0";
797 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
798 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
799 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
802 trackpad_irq: trackpad-irq {
803 samsung,pins = "gpx1-1";
804 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
805 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
806 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
809 power_key_irq: power-key-irq {
810 samsung,pins = "gpx1-2";
811 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
812 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
813 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
817 samsung,pins = "gpx1-5";
818 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
819 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
820 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
823 tps65090_irq: tps65090-irq {
824 samsung,pins = "gpx2-5";
825 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
826 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
827 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
830 dp_hpd_gpio: dp_hpd_gpio {
831 samsung,pins = "gpx2-6";
832 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
833 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
834 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
837 max77802_irq: max77802-irq {
838 samsung,pins = "gpx3-1";
839 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
840 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
841 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
845 samsung,pins = "gpx3-4";
846 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
847 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
848 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
851 hdmi_hpd_irq: hdmi-hpd-irq {
852 samsung,pins = "gpx3-7";
853 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
854 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
855 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
858 pmic_dvs_1: pmic-dvs-1 {
859 samsung,pins = "gpy7-6";
860 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
861 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
862 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
867 /* Adjust WiFi drive strengths lower for EMI */
869 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
873 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
876 sd1_bus1: sd1-bus-width1 {
877 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
880 sd1_bus4: sd1-bus-width4 {
881 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
884 sd1_bus8: sd1-bus-width8 {
885 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
890 pmic_dvs_2: pmic-dvs-2 {
891 samsung,pins = "gpj4-2";
892 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
893 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
894 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
897 pmic_dvs_3: pmic-dvs-3 {
898 samsung,pins = "gpj4-3";
899 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
900 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
901 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
906 /* Drive SPI lines at x2 for better integrity */
908 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
911 /* Drive SPI chip select at x2 for better integrity */
912 ec_spi_cs: ec-spi-cs {
913 samsung,pins = "gpb1-2";
914 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
915 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
916 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
919 usb300_vbus_en: usb300-vbus-en {
920 samsung,pins = "gph0-0";
921 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
922 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
923 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
926 usb301_vbus_en: usb301-vbus-en {
927 samsung,pins = "gph0-1";
928 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
929 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
930 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
933 pmic_selb: pmic-selb {
934 samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
936 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
937 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
938 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
942 &pmu_system_controller {
943 assigned-clocks = <&pmu_system_controller 0>;
944 assigned-clock-parents = <&clock CLK_FIN_PLL>;
949 clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
950 clock-names = "rtc", "rtc_src";
956 samsung,spi-src-clk = <0>;
957 cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
960 compatible = "google,cros-ec-spi";
961 interrupt-parent = <&gpx1>;
962 interrupts = <5 IRQ_TYPE_NONE>;
963 pinctrl-names = "default";
964 pinctrl-0 = <&ec_spi_cs &ec_irq>;
966 spi-max-frequency = <3125000>;
967 google,has-vbc-nvram;
970 samsung,spi-feedback-delay = <1>;
973 i2c_tunnel: i2c-tunnel {
974 compatible = "google,cros-ec-i2c-tunnel";
975 #address-cells = <1>;
977 google,remote-bus = <0>;
979 battery: sbs-battery@b {
980 compatible = "sbs,sbs-battery";
982 sbs,poll-retry-count = <1>;
983 sbs,i2c-retry-count = <2>;
987 compatible = "ti,tps65090";
991 * Config irq to disable internal pulls
992 * even though we run in polling mode.
994 pinctrl-names = "default";
995 pinctrl-0 = <&tps65090_irq>;
997 vsys1-supply = <&vbat>;
998 vsys2-supply = <&vbat>;
999 vsys3-supply = <&vbat>;
1000 infet1-supply = <&vbat>;
1001 infet2-supply = <&tps65090_dcdc1>;
1002 infet3-supply = <&tps65090_dcdc2>;
1003 infet4-supply = <&tps65090_dcdc2>;
1004 infet5-supply = <&tps65090_dcdc2>;
1005 infet6-supply = <&tps65090_dcdc2>;
1006 infet7-supply = <&tps65090_dcdc1>;
1007 vsys-l1-supply = <&vbat>;
1008 vsys-l2-supply = <&vbat>;
1011 tps65090_dcdc1: dcdc1 {
1012 ti,enable-ext-control;
1014 tps65090_dcdc2: dcdc2 {
1015 ti,enable-ext-control;
1017 tps65090_dcdc3: dcdc3 {
1018 ti,enable-ext-control;
1020 tps65090_fet1: fet1 {
1021 regulator-name = "vcd_led";
1023 tps65090_fet2: fet2 {
1024 regulator-name = "video_mid";
1025 regulator-always-on;
1027 tps65090_fet3: fet3 {
1028 regulator-name = "wwan_r";
1029 regulator-always-on;
1031 tps65090_fet4: fet4 {
1032 regulator-name = "sdcard";
1033 regulator-always-on;
1035 tps65090_fet5: fet5 {
1036 regulator-name = "camout";
1037 regulator-always-on;
1039 tps65090_fet6: fet6 {
1040 regulator-name = "lcd_vdd";
1042 tps65090_fet7: fet7 {
1043 regulator-name = "video_mid_1a";
1044 regulator-always-on;
1046 tps65090_ldo1: ldo1 {
1048 tps65090_ldo2: ldo2 {
1053 compatible = "ti,tps65090-charger";
1065 vtmu-supply = <&ldo10_reg>;
1069 vtmu-supply = <&ldo10_reg>;
1073 vtmu-supply = <&ldo10_reg>;
1077 vtmu-supply = <&ldo10_reg>;
1081 vtmu-supply = <&ldo10_reg>;
1093 vbus-supply = <&usb300_vbus_reg>;
1097 vbus-supply = <&usb301_vbus_reg>;
1101 * Use longest HW watchdog in SoC (32 seconds) since the hardware
1102 * watchdog provides no debugging information (compared to soft/hard
1103 * lockup detectors) and so should be last resort.
1109 #include "cros-ec-keyboard.dtsi"
1110 #include "cros-adc-thermistors.dtsi"