arch/arm/boot/dts/armada-38x.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Marvell Armada 38x family of SoCs.
   4  *
   5  * Copyright (C) 2014 Marvell
   6  *
   7  * Lior Amsalem <alior@marvell.com>
   8  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   9  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  10  */
  11
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14
  15 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
  16
  17 / {
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20
  21         model = "Marvell Armada 38x family SoC";
  22         compatible = "marvell,armada380";
  23
  24         aliases {
  25                 gpio0 = &gpio0;
  26                 gpio1 = &gpio1;
  27                 serial0 = &uart0;
  28                 serial1 = &uart1;
  29         };
  30
  31         pmu {
  32                 compatible = "arm,cortex-a9-pmu";
  33                 interrupts-extended = <&mpic 3>;
  34         };
  35
  36         soc {
  37                 compatible = "marvell,armada380-mbus", "simple-bus";
  38                 #address-cells = <2>;
  39                 #size-cells = <1>;
  40                 controller = <&mbusc>;
  41                 interrupt-parent = <&gic>;
  42                 pcie-mem-aperture = <0xe0000000 0x8000000>;
  43                 pcie-io-aperture  = <0xe8000000 0x100000>;
  44
  45                 bootrom {
  46                         compatible = "marvell,bootrom";
  47                         reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
  48                 };
  49
  50                 devbus_bootcs: devbus-bootcs {
  51                         compatible = "marvell,mvebu-devbus";
  52                         reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
  53                         ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
  54                         #address-cells = <1>;
  55                         #size-cells = <1>;
  56                         clocks = <&coreclk 0>;
  57                         status = "disabled";
  58                 };
  59
  60                 devbus_cs0: devbus-cs0 {
  61                         compatible = "marvell,mvebu-devbus";
  62                         reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
  63                         ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66                         clocks = <&coreclk 0>;
  67                         status = "disabled";
  68                 };
  69
  70                 devbus_cs1: devbus-cs1 {
  71                         compatible = "marvell,mvebu-devbus";
  72                         reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
  73                         ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76                         clocks = <&coreclk 0>;
  77                         status = "disabled";
  78                 };
  79
  80                 devbus_cs2: devbus-cs2 {
  81                         compatible = "marvell,mvebu-devbus";
  82                         reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
  83                         ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
  84                         #address-cells = <1>;
  85                         #size-cells = <1>;
  86                         clocks = <&coreclk 0>;
  87                         status = "disabled";
  88                 };
  89
  90                 devbus_cs3: devbus-cs3 {
  91                         compatible = "marvell,mvebu-devbus";
  92                         reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
  93                         ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96                         clocks = <&coreclk 0>;
  97                         status = "disabled";
  98                 };
  99
 100                 internal-regs {
 101                         compatible = "simple-bus";
 102                         #address-cells = <1>;
 103                         #size-cells = <1>;
 104                         ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 105
 106                         L2: cache-controller@8000 {
 107                                 compatible = "arm,pl310-cache";
 108                                 reg = <0x8000 0x1000>;
 109                                 cache-unified;
 110                                 cache-level = <2>;
 111                                 arm,double-linefill-incr = <0>;
 112                                 arm,double-linefill-wrap = <0>;
 113                                 arm,double-linefill = <0>;
 114                                 prefetch-data = <1>;
 115                         };
 116
 117                         scu@c000 {
 118                                 compatible = "arm,cortex-a9-scu";
 119                                 reg = <0xc000 0x58>;
 120                         };
 121
 122                         timer@c200 {
 123                                 compatible = "arm,cortex-a9-global-timer";
 124                                 reg = <0xc200 0x20>;
 125                                 interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
 126                                 clocks = <&coreclk 2>;
 127                         };
 128
 129                         timer@c600 {
 130                                 compatible = "arm,cortex-a9-twd-timer";
 131                                 reg = <0xc600 0x20>;
 132                                 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
 133                                 clocks = <&coreclk 2>;
 134                         };
 135
 136                         gic: interrupt-controller@d000 {
 137                                 compatible = "arm,cortex-a9-gic";
 138                                 #interrupt-cells = <3>;
 139                                 #size-cells = <0>;
 140                                 interrupt-controller;
 141                                 reg = <0xd000 0x1000>,
 142                                       <0xc100 0x100>;
 143                         };
 144
 145                         i2c0: i2c@11000 {
 146                                 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 147                                 reg = <0x11000 0x20>;
 148                                 #address-cells = <1>;
 149                                 #size-cells = <0>;
 150                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 151                                 timeout-ms = <1000>;
 152                                 clocks = <&coreclk 0>;
 153                                 status = "disabled";
 154                         };
 155
 156                         i2c1: i2c@11100 {
 157                                 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 158                                 reg = <0x11100 0x20>;
 159                                 #address-cells = <1>;
 160                                 #size-cells = <0>;
 161                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 162                                 timeout-ms = <1000>;
 163                                 clocks = <&coreclk 0>;
 164                                 status = "disabled";
 165                         };
 166
 167                         uart0: serial@12000 {
 168                                 compatible = "marvell,armada-38x-uart";
 169                                 reg = <0x12000 0x100>;
 170                                 reg-shift = <2>;
 171                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 172                                 reg-io-width = <1>;
 173                                 clocks = <&coreclk 0>;
 174                                 status = "disabled";
 175                         };
 176
 177                         uart1: serial@12100 {
 178                                 compatible = "marvell,armada-38x-uart";
 179                                 reg = <0x12100 0x100>;
 180                                 reg-shift = <2>;
 181                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 182                                 reg-io-width = <1>;
 183                                 clocks = <&coreclk 0>;
 184                                 status = "disabled";
 185                         };
 186
 187                         pinctrl: pinctrl@18000 {
 188                                 reg = <0x18000 0x20>;
 189
 190                                 ge0_rgmii_pins: ge-rgmii-pins-0 {
 191                                         marvell,pins = "mpp6", "mpp7", "mpp8",
 192                                                        "mpp9", "mpp10", "mpp11",
 193                                                        "mpp12", "mpp13", "mpp14",
 194                                                        "mpp15", "mpp16", "mpp17";
 195                                         marvell,function = "ge0";
 196                                 };
 197
 198                                 ge1_rgmii_pins: ge-rgmii-pins-1 {
 199                                         marvell,pins = "mpp21", "mpp27", "mpp28",
 200                                                        "mpp29", "mpp30", "mpp31",
 201                                                        "mpp32", "mpp37", "mpp38",
 202                                                        "mpp39", "mpp40", "mpp41";
 203                                         marvell,function = "ge1";
 204                                 };
 205
 206                                 i2c0_pins: i2c-pins-0 {
 207                                         marvell,pins = "mpp2", "mpp3";
 208                                         marvell,function = "i2c0";
 209                                 };
 210
 211                                 mdio_pins: mdio-pins {
 212                                         marvell,pins = "mpp4", "mpp5";
 213                                         marvell,function = "ge";
 214                                 };
 215
 216                                 ref_clk0_pins: ref-clk-pins-0 {
 217                                         marvell,pins = "mpp45";
 218                                         marvell,function = "ref";
 219                                 };
 220
 221                                 ref_clk1_pins: ref-clk-pins-1 {
 222                                         marvell,pins = "mpp46";
 223                                         marvell,function = "ref";
 224                                 };
 225
 226                                 spi0_pins: spi-pins-0 {
 227                                         marvell,pins = "mpp22", "mpp23", "mpp24",
 228                                                        "mpp25";
 229                                         marvell,function = "spi0";
 230                                 };
 231
 232                                 spi1_pins: spi-pins-1 {
 233                                         marvell,pins = "mpp56", "mpp57", "mpp58",
 234                                                        "mpp59";
 235                                         marvell,function = "spi1";
 236                                 };
 237
 238                                 nand_pins: nand-pins {
 239                                         marvell,pins = "mpp22", "mpp34", "mpp23",
 240                                                        "mpp33", "mpp38", "mpp28",
 241                                                        "mpp40", "mpp42", "mpp35",
 242                                                        "mpp36", "mpp25", "mpp30",
 243                                                        "mpp32";
 244                                         marvell,function = "dev";
 245                                 };
 246
 247                                 nand_rb: nand-rb {
 248                                         marvell,pins = "mpp41";
 249                                         marvell,function = "nand";
 250                                 };
 251
 252                                 uart0_pins: uart-pins-0 {
 253                                         marvell,pins = "mpp0", "mpp1";
 254                                         marvell,function = "ua0";
 255                                 };
 256
 257                                 uart1_pins: uart-pins-1 {
 258                                         marvell,pins = "mpp19", "mpp20";
 259                                         marvell,function = "ua1";
 260                                 };
 261
 262                                 sdhci_pins: sdhci-pins {
 263                                         marvell,pins = "mpp48", "mpp49", "mpp50",
 264                                                        "mpp52", "mpp53", "mpp54",
 265                                                        "mpp55", "mpp57", "mpp58",
 266                                                        "mpp59";
 267                                         marvell,function = "sd0";
 268                                 };
 269
 270                                 sata0_pins: sata-pins-0 {
 271                                         marvell,pins = "mpp20";
 272                                         marvell,function = "sata0";
 273                                 };
 274
 275                                 sata1_pins: sata-pins-1 {
 276                                         marvell,pins = "mpp19";
 277                                         marvell,function = "sata1";
 278                                 };
 279
 280                                 sata2_pins: sata-pins-2 {
 281                                         marvell,pins = "mpp47";
 282                                         marvell,function = "sata2";
 283                                 };
 284
 285                                 sata3_pins: sata-pins-3 {
 286                                         marvell,pins = "mpp44";
 287                                         marvell,function = "sata3";
 288                                 };
 289                         };
 290
 291                         gpio0: gpio@18100 {
 292                                 compatible = "marvell,armada-370-gpio",
 293                                              "marvell,orion-gpio";
 294                                 reg = <0x18100 0x40>, <0x181c0 0x08>;
 295                                 reg-names = "gpio", "pwm";
 296                                 ngpios = <32>;
 297                                 gpio-controller;
 298                                 #gpio-cells = <2>;
 299                                 #pwm-cells = <2>;
 300                                 interrupt-controller;
 301                                 #interrupt-cells = <2>;
 302                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 303                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 304                                              <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 305                                              <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 306                                 clocks = <&coreclk 0>;
 307                         };
 308
 309                         gpio1: gpio@18140 {
 310                                 compatible = "marvell,armada-370-gpio",
 311                                              "marvell,orion-gpio";
 312                                 reg = <0x18140 0x40>, <0x181c8 0x08>;
 313                                 reg-names = "gpio", "pwm";
 314                                 ngpios = <28>;
 315                                 gpio-controller;
 316                                 #gpio-cells = <2>;
 317                                 #pwm-cells = <2>;
 318                                 interrupt-controller;
 319                                 #interrupt-cells = <2>;
 320                                 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 321                                              <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
 322                                              <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
 323                                              <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 324                                 clocks = <&coreclk 0>;
 325                         };
 326
 327                         systemc: system-controller@18200 {
 328                                 compatible = "marvell,armada-380-system-controller",
 329                                              "marvell,armada-370-xp-system-controller";
 330                                 reg = <0x18200 0x100>;
 331                         };
 332
 333                         gateclk: clock-gating-control@18220 {
 334                                 compatible = "marvell,armada-380-gating-clock";
 335                                 reg = <0x18220 0x4>;
 336                                 clocks = <&coreclk 0>;
 337                                 #clock-cells = <1>;
 338                         };
 339
 340                         comphy: phy@18300 {
 341                                 compatible = "marvell,armada-380-comphy";
 342                                 reg = <0x18300 0x100>;
 343                                 #address-cells = <1>;
 344                                 #size-cells = <0>;
 345
 346                                 comphy0: phy@0 {
 347                                         reg = <0>;
 348                                         #phy-cells = <1>;
 349                                 };
 350
 351                                 comphy1: phy@1 {
 352                                         reg = <1>;
 353                                         #phy-cells = <1>;
 354                                 };
 355
 356                                 comphy2: phy@2 {
 357                                         reg = <2>;
 358                                         #phy-cells = <1>;
 359                                 };
 360
 361                                 comphy3: phy@3 {
 362                                         reg = <3>;
 363                                         #phy-cells = <1>;
 364                                 };
 365
 366                                 comphy4: phy@4 {
 367                                         reg = <4>;
 368                                         #phy-cells = <1>;
 369                                 };
 370
 371                                 comphy5: phy@5 {
 372                                         reg = <5>;
 373                                         #phy-cells = <1>;
 374                                 };
 375                         };
 376
 377                         coreclk: mvebu-sar@18600 {
 378                                 compatible = "marvell,armada-380-core-clock";
 379                                 reg = <0x18600 0x04>;
 380                                 #clock-cells = <1>;
 381                         };
 382
 383                         mbusc: mbus-controller@20000 {
 384                                 compatible = "marvell,mbus-controller";
 385                                 reg = <0x20000 0x100>, <0x20180 0x20>,
 386                                       <0x20250 0x8>;
 387                         };
 388
 389                         mpic: interrupt-controller@20a00 {
 390                                 compatible = "marvell,mpic";
 391                                 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 392                                 #interrupt-cells = <1>;
 393                                 #size-cells = <1>;
 394                                 interrupt-controller;
 395                                 msi-controller;
 396                                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 397                         };
 398
 399                         timer: timer@20300 {
 400                                 compatible = "marvell,armada-380-timer",
 401                                              "marvell,armada-xp-timer";
 402                                 reg = <0x20300 0x30>, <0x21040 0x30>;
 403                                 interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
 404                                                       <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
 405                                                       <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 406                                                       <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 407                                                       <&mpic 5>,
 408                                                       <&mpic 6>;
 409                                 clocks = <&coreclk 2>, <&refclk>;
 410                                 clock-names = "nbclk", "fixed";
 411                         };
 412
 413                         watchdog: watchdog@20300 {
 414                                 compatible = "marvell,armada-380-wdt";
 415                                 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
 416                                 clocks = <&coreclk 2>, <&refclk>;
 417                                 clock-names = "nbclk", "fixed";
 418                                 interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 419                                                       <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
 420                         };
 421
 422                         cpurst: cpurst@20800 {
 423                                 compatible = "marvell,armada-370-cpu-reset";
 424                                 reg = <0x20800 0x10>;
 425                         };
 426
 427                         mpcore-soc-ctrl@20d20 {
 428                                 compatible = "marvell,armada-380-mpcore-soc-ctrl";
 429                                 reg = <0x20d20 0x6c>;
 430                         };
 431
 432                         coherencyfab: coherency-fabric@21010 {
 433                                 compatible = "marvell,armada-380-coherency-fabric";
 434                                 reg = <0x21010 0x1c>;
 435                         };
 436
 437                         pmsu: pmsu@22000 {
 438                                 compatible = "marvell,armada-380-pmsu";
 439                                 reg = <0x22000 0x1000>;
 440                         };
 441
 442                         /*
 443                          * As a special exception to the "order by
 444                          * register address" rule, the eth0 node is
 445                          * placed here to ensure that it gets
 446                          * registered as the first interface, since
 447                          * the network subsystem doesn't allow naming
 448                          * interfaces using DT aliases. Without this,
 449                          * the ordering of interfaces is different
 450                          * from the one used in U-Boot and the
 451                          * labeling of interfaces on the boards, which
 452                          * is very confusing for users.
 453                          */
 454                         eth0: ethernet@70000 {
 455                                 compatible = "marvell,armada-370-neta";
 456                                 reg = <0x70000 0x4000>;
 457                                 interrupts-extended = <&mpic 8>;
 458                                 clocks = <&gateclk 4>;
 459                                 tx-csum-limit = <9800>;
 460                                 status = "disabled";
 461                         };
 462
 463                         eth1: ethernet@30000 {
 464                                 compatible = "marvell,armada-370-neta";
 465                                 reg = <0x30000 0x4000>;
 466                                 interrupts-extended = <&mpic 10>;
 467                                 clocks = <&gateclk 3>;
 468                                 status = "disabled";
 469                         };
 470
 471                         eth2: ethernet@34000 {
 472                                 compatible = "marvell,armada-370-neta";
 473                                 reg = <0x34000 0x4000>;
 474                                 interrupts-extended = <&mpic 12>;
 475                                 clocks = <&gateclk 2>;
 476                                 status = "disabled";
 477                         };
 478
 479                         usb0: usb@58000 {
 480                                 compatible = "marvell,orion-ehci";
 481                                 reg = <0x58000 0x500>;
 482                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 483                                 clocks = <&gateclk 18>;
 484                                 status = "disabled";
 485                         };
 486
 487                         xor0: xor@60800 {
 488                                 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 489                                 reg = <0x60800 0x100
 490                                        0x60a00 0x100>;
 491                                 clocks = <&gateclk 22>;
 492                                 status = "okay";
 493
 494                                 xor00 {
 495                                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 496                                         dmacap,memcpy;
 497                                         dmacap,xor;
 498                                 };
 499                                 xor01 {
 500                                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 501                                         dmacap,memcpy;
 502                                         dmacap,xor;
 503                                         dmacap,memset;
 504                                 };
 505                         };
 506
 507                         xor1: xor@60900 {
 508                                 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 509                                 reg = <0x60900 0x100
 510                                        0x60b00 0x100>;
 511                                 clocks = <&gateclk 28>;
 512                                 status = "okay";
 513
 514                                 xor10 {
 515                                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 516                                         dmacap,memcpy;
 517                                         dmacap,xor;
 518                                 };
 519                                 xor11 {
 520                                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 521                                         dmacap,memcpy;
 522                                         dmacap,xor;
 523                                         dmacap,memset;
 524                                 };
 525                         };
 526
 527                         mdio: mdio@72004 {
 528                                 #address-cells = <1>;
 529                                 #size-cells = <0>;
 530                                 compatible = "marvell,orion-mdio";
 531                                 reg = <0x72004 0x4>;
 532                                 clocks = <&gateclk 4>;
 533                         };
 534
 535                         cesa: crypto@90000 {
 536                                 compatible = "marvell,armada-38x-crypto";
 537                                 reg = <0x90000 0x10000>;
 538                                 reg-names = "regs";
 539                                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 540                                              <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 541                                 clocks = <&gateclk 23>, <&gateclk 21>,
 542                                          <&gateclk 14>, <&gateclk 16>;
 543                                 clock-names = "cesa0", "cesa1",
 544                                               "cesaz0", "cesaz1";
 545                                 marvell,crypto-srams = <&crypto_sram0>,
 546                                                        <&crypto_sram1>;
 547                                 marvell,crypto-sram-size = <0x800>;
 548                         };
 549
 550                         rtc: rtc@a3800 {
 551                                 compatible = "marvell,armada-380-rtc";
 552                                 reg = <0xa3800 0x20>, <0x184a0 0x0c>;
 553                                 reg-names = "rtc", "rtc-soc";
 554                                 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 555                         };
 556
 557                         ahci0: sata@a8000 {
 558                                 compatible = "marvell,armada-380-ahci";
 559                                 reg = <0xa8000 0x2000>;
 560                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 561                                 clocks = <&gateclk 15>;
 562                                 status = "disabled";
 563                         };
 564
 565                         bm: bm@c8000 {
 566                                 compatible = "marvell,armada-380-neta-bm";
 567                                 reg = <0xc8000 0xac>;
 568                                 clocks = <&gateclk 13>;
 569                                 internal-mem = <&bm_bppi>;
 570                                 status = "disabled";
 571                         };
 572
 573                         ahci1: sata@e0000 {
 574                                 compatible = "marvell,armada-380-ahci";
 575                                 reg = <0xe0000 0x2000>;
 576                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 577                                 clocks = <&gateclk 30>;
 578                                 status = "disabled";
 579                         };
 580
 581                         coredivclk: clock@e4250 {
 582                                 compatible = "marvell,armada-380-corediv-clock";
 583                                 reg = <0xe4250 0xc>;
 584                                 #clock-cells = <1>;
 585                                 clocks = <&mainpll>;
 586                                 clock-output-names = "nand";
 587                         };
 588
 589                         thermal: thermal@e8078 {
 590                                 compatible = "marvell,armada380-thermal";
 591                                 reg = <0xe4078 0x4>, <0xe4070 0x8>;
 592                                 status = "okay";
 593                         };
 594
 595                         nand_controller: nand-controller@d0000 {
 596                                 compatible = "marvell,armada370-nand-controller";
 597                                 reg = <0xd0000 0x54>;
 598                                 #address-cells = <1>;
 599                                 #size-cells = <0>;
 600                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 601                                 clocks = <&coredivclk 0>;
 602                                 status = "disabled";
 603                         };
 604
 605                         sdhci: sdhci@d8000 {
 606                                 compatible = "marvell,armada-380-sdhci";
 607                                 reg-names = "sdhci", "mbus", "conf-sdio3";
 608                                 reg = <0xd8000 0x1000>,
 609                                         <0xdc000 0x100>,
 610                                         <0x18454 0x4>;
 611                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 612                                 clocks = <&gateclk 17>;
 613                                 mrvl,clk-delay-cycles = <0x1F>;
 614                                 status = "disabled";
 615                         };
 616
 617                         usb3_0: usb3@f0000 {
 618                                 compatible = "marvell,armada-380-xhci";
 619                                 reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
 620                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 621                                 clocks = <&gateclk 9>;
 622                                 status = "disabled";
 623                         };
 624
 625                         usb3_1: usb3@f8000 {
 626                                 compatible = "marvell,armada-380-xhci";
 627                                 reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
 628                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 629                                 clocks = <&gateclk 10>;
 630                                 status = "disabled";
 631                         };
 632                 };
 633
 634                 crypto_sram0: sa-sram0 {
 635                         compatible = "mmio-sram";
 636                         reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
 637                         clocks = <&gateclk 23>;
 638                         #address-cells = <1>;
 639                         #size-cells = <1>;
 640                         ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
 641                 };
 642
 643                 crypto_sram1: sa-sram1 {
 644                         compatible = "mmio-sram";
 645                         reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
 646                         clocks = <&gateclk 21>;
 647                         #address-cells = <1>;
 648                         #size-cells = <1>;
 649                         ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
 650                 };
 651
 652                 bm_bppi: bm-bppi {
 653                         compatible = "mmio-sram";
 654                         reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
 655                         ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
 656                         #address-cells = <1>;
 657                         #size-cells = <1>;
 658                         clocks = <&gateclk 13>;
 659                         no-memory-wc;
 660                         status = "disabled";
 661                 };
 662
 663                 spi0: spi@10600 {
 664                         compatible = "marvell,armada-380-spi",
 665                                         "marvell,orion-spi";
 666                         reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
 667                         #address-cells = <1>;
 668                         #size-cells = <0>;
 669                         cell-index = <0>;
 670                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 671                         clocks = <&coreclk 0>;
 672                         status = "disabled";
 673                 };
 674
 675                 spi1: spi@10680 {
 676                         compatible = "marvell,armada-380-spi",
 677                                         "marvell,orion-spi";
 678                         reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
 679                         #address-cells = <1>;
 680                         #size-cells = <0>;
 681                         cell-index = <1>;
 682                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 683                         clocks = <&coreclk 0>;
 684                         status = "disabled";
 685                 };
 686         };
 687
 688         clocks {
 689                 /* 1 GHz fixed main PLL */
 690                 mainpll: mainpll {
 691                         compatible = "fixed-clock";
 692                         #clock-cells = <0>;
 693                         clock-frequency = <1000000000>;
 694                 };
 695
 696                 /* 25 MHz reference crystal */
 697                 refclk: oscillator {
 698                         compatible = "fixed-clock";
 699                         #clock-cells = <0>;
 700                         clock-frequency = <25000000>;
 701                 };
 702         };
 703 };