2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "am3517.dtsi"
11 #include "am3517-som.dtsi"
12 #include "am3517-evm-ui.dtsi"
13 #include <dt-bindings/input/input.h>
16 model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
17 compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
24 device_type = "memory";
25 reg = <0x80000000 0x10000000>; /* 256 MB */
29 compatible = "regulator-fixed";
30 regulator-name = "vmmc_fixed";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
36 compatible = "gpio-keys-polled";
37 poll-interval = <100>;
40 label = "User Push Button";
42 gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
46 label = "User Switch 1";
48 gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
52 label = "User Switch 2";
54 gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
58 label = "User Switch 3";
60 gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
64 label = "User Switch 4";
66 gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
70 label = "User Switch 5";
72 gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
76 label = "User Switch 6";
78 gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
82 label = "User Switch 7";
84 gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
88 label = "User Switch 8";
90 gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
95 compatible = "gpio-leds";
97 pinctrl-names = "default";
98 pinctrl-0 = <&leds_pins>;
101 label = "am3517evm:green:user_led_1";
102 gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
103 default-state = "on";
107 label = "am3517evm:green:user_led_2";
108 gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
109 default-state = "on";
113 label = "am3517evm:green:user_led_3";
114 gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
115 linux,default-trigger = "mmc0"; /* SD/MMC card activity */
119 label = "am3517evm:green:user_led_4";
120 gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
121 linux,default-trigger = "heartbeat";
126 compatible = "panel-dpi";
129 pinctrl-names = "default";
130 enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
131 vcc-supply = <&vdd_io_reg>;
135 remote-endpoint = <&dpi_out>;
140 clock-frequency = <9000000>;
152 pixelclk-active = <1>;
157 compatible = "pwm-backlight";
158 pinctrl-names = "default";
159 power-supply = <&vdd_io_reg>;
160 pinctrl-0 = <&backlight_pins>;
161 pwms = <&pwm11 0 5000000 0>;
162 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
163 default-brightness-level = <7>;
164 enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
167 pwm11: dmtimer-pwm@11 {
168 compatible = "ti,omap-dmtimer-pwm";
169 pinctrl-names = "default";
170 pinctrl-0 = <&pwm_pins>;
171 ti,timers = <&timer11>;
175 /* HS USB Host PHY on PORT 1 */
176 hsusb1_phy: hsusb1_phy {
177 compatible = "usb-nop-xceiv";
178 reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
194 pinctrl-names = "default";
195 pinctrl-0 = <&dss_dpi_pins>;
197 vdds_dsi-supply = <&vdd_io_reg>;
198 vdda_video-supply = <&vdd_io_reg>;
202 remote-endpoint = <&lcd_in>;
209 clock-frequency = <400000>;
210 /* User DIP swithes [1:8] / User LEDS [1:2] */
212 compatible = "ti,tca6416";
216 vcc-supply = <&vdd_io_reg>;
221 clock-frequency = <400000>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&mmc1_pins>;
228 vmmc-supply = <&vmmc_fixed>;
230 wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
231 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
239 port1-mode = "ehci-phy";
243 phys = <&hsusb1_phy>;
247 pinctrl-names = "default";
248 pinctrl-0 = <&hsusb1_rst_pins>;
250 leds_pins: pinmux_leds_pins {
251 pinctrl-single,pins = <
252 OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
253 OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
257 mmc1_pins: pinmux_mmc1_pins {
258 pinctrl-single,pins = <
259 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
260 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
261 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
262 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
263 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
264 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
265 OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
266 OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
270 pwm_pins: pinmux_pwm_pins {
271 pinctrl-single,pins = <
272 OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */
276 backlight_pins: pinmux_backlight_pins {
277 pinctrl-single,pins = <
278 OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
282 dss_dpi_pins: pinmux_dss_dpi_pins {
283 pinctrl-single,pins = <
284 OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
285 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
286 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
287 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
288 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
289 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
290 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
291 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
292 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
293 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
294 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
295 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
296 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
297 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
298 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
299 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
300 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
301 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
302 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
303 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
304 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
308 hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
309 pinctrl-single,pins = <
310 OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
316 pinctrl-names = "default";
317 pinctrl-0 = <&hsusb1_pins>;
319 hsusb1_pins: pinmux_hsusb1_pins {
320 pinctrl-single,pins = <
321 OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
322 OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
323 OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
324 OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
325 OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
326 OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
327 OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
328 OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
329 OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
330 OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
331 OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
332 OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */