arch/arm/boot/dts/am335x-evmsk.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x Starter Kit
  11  * http://www.ti.com/tool/tmdssk3358
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "TI AM335x EVM-SK";
  22         compatible = "ti,am335x-evmsk", "ti,am33xx";
  23
  24         cpus {
  25                 cpu@0 {
  26                         cpu0-supply = <&vdd1_reg>;
  27                 };
  28         };
  29
  30         memory@80000000 {
  31                 device_type = "memory";
  32                 reg = <0x80000000 0x10000000>; /* 256 MB */
  33         };
  34
  35         chosen {
  36                 stdout-path = &uart0;
  37         };
  38
  39         vbat: fixedregulator0 {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vbat";
  42                 regulator-min-microvolt = <5000000>;
  43                 regulator-max-microvolt = <5000000>;
  44                 regulator-boot-on;
  45         };
  46
  47         lis3_reg: fixedregulator1 {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "lis3_reg";
  50                 regulator-boot-on;
  51         };
  52
  53         wl12xx_vmmc: fixedregulator2 {
  54                 pinctrl-names = "default";
  55                 pinctrl-0 = <&wl12xx_gpio>;
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "vwl1271";
  58                 regulator-min-microvolt = <1800000>;
  59                 regulator-max-microvolt = <1800000>;
  60                 gpio = <&gpio1 29 0>;
  61                 startup-delay-us = <70000>;
  62                 enable-active-high;
  63         };
  64
  65         vtt_fixed: fixedregulator3 {
  66                 compatible = "regulator-fixed";
  67                 regulator-name = "vtt";
  68                 regulator-min-microvolt = <1500000>;
  69                 regulator-max-microvolt = <1500000>;
  70                 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  71                 regulator-always-on;
  72                 regulator-boot-on;
  73                 enable-active-high;
  74         };
  75
  76         leds {
  77                 pinctrl-names = "default";
  78                 pinctrl-0 = <&user_leds_s0>;
  79
  80                 compatible = "gpio-leds";
  81
  82                 led1 {
  83                         label = "evmsk:green:usr0";
  84                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  85                         default-state = "off";
  86                 };
  87
  88                 led2 {
  89                         label = "evmsk:green:usr1";
  90                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  91                         default-state = "off";
  92                 };
  93
  94                 led3 {
  95                         label = "evmsk:green:mmc0";
  96                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
  97                         linux,default-trigger = "mmc0";
  98                         default-state = "off";
  99                 };
 100
 101                 led4 {
 102                         label = "evmsk:green:heartbeat";
 103                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 104                         linux,default-trigger = "heartbeat";
 105                         default-state = "off";
 106                 };
 107         };
 108
 109         gpio_buttons: gpio_buttons0 {
 110                 compatible = "gpio-keys";
 111                 #address-cells = <1>;
 112                 #size-cells = <0>;
 113
 114                 switch1 {
 115                         label = "button0";
 116                         linux,code = <0x100>;
 117                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 118                 };
 119
 120                 switch2 {
 121                         label = "button1";
 122                         linux,code = <0x101>;
 123                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 124                 };
 125
 126                 switch3 {
 127                         label = "button2";
 128                         linux,code = <0x102>;
 129                         gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 130                         wakeup-source;
 131                 };
 132
 133                 switch4 {
 134                         label = "button3";
 135                         linux,code = <0x103>;
 136                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 137                 };
 138         };
 139
 140         backlight {
 141                 compatible = "pwm-backlight";
 142                 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 143                 brightness-levels = <0 58 61 66 75 90 125 170 255>;
 144                 default-brightness-level = <8>;
 145         };
 146
 147         sound {
 148                 compatible = "simple-audio-card";
 149                 simple-audio-card,name = "AM335x-EVMSK";
 150                 simple-audio-card,widgets =
 151                         "Headphone", "Headphone Jack";
 152                 simple-audio-card,routing =
 153                         "Headphone Jack",       "HPLOUT",
 154                         "Headphone Jack",       "HPROUT";
 155                 simple-audio-card,format = "dsp_b";
 156                 simple-audio-card,bitclock-master = <&sound_master>;
 157                 simple-audio-card,frame-master = <&sound_master>;
 158                 simple-audio-card,bitclock-inversion;
 159
 160                 simple-audio-card,cpu {
 161                         sound-dai = <&mcasp1>;
 162                 };
 163
 164                 sound_master: simple-audio-card,codec {
 165                         sound-dai = <&tlv320aic3106>;
 166                         system-clock-frequency = <24000000>;
 167                 };
 168         };
 169
 170         panel {
 171                 compatible = "ti,tilcdc,panel";
 172                 pinctrl-names = "default", "sleep";
 173                 pinctrl-0 = <&lcd_pins_default>;
 174                 pinctrl-1 = <&lcd_pins_sleep>;
 175                 status = "okay";
 176                 panel-info {
 177                         ac-bias         = <255>;
 178                         ac-bias-intrpt  = <0>;
 179                         dma-burst-sz    = <16>;
 180                         bpp             = <32>;
 181                         fdd             = <0x80>;
 182                         sync-edge       = <0>;
 183                         sync-ctrl       = <1>;
 184                         raster-order    = <0>;
 185                         fifo-th         = <0>;
 186                 };
 187                 display-timings {
 188                         480x272 {
 189                                 hactive         = <480>;
 190                                 vactive         = <272>;
 191                                 hback-porch     = <43>;
 192                                 hfront-porch    = <8>;
 193                                 hsync-len       = <4>;
 194                                 vback-porch     = <12>;
 195                                 vfront-porch    = <4>;
 196                                 vsync-len       = <10>;
 197                                 clock-frequency = <9000000>;
 198                                 hsync-active    = <0>;
 199                                 vsync-active    = <0>;
 200                         };
 201                 };
 202         };
 203 };
 204
 205 &am33xx_pinmux {
 206         pinctrl-names = "default";
 207         pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 208
 209         lcd_pins_default: lcd_pins_default {
 210                 pinctrl-single,pins = <
 211                         AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad8.lcd_data23 */
 212                         AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad9.lcd_data22 */
 213                         AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad10.lcd_data21 */
 214                         AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad11.lcd_data20 */
 215                         AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad12.lcd_data19 */
 216                         AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad13.lcd_data18 */
 217                         AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad14.lcd_data17 */
 218                         AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad15.lcd_data16 */
 219                         AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data0.lcd_data0 */
 220                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data1.lcd_data1 */
 221                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data2.lcd_data2 */
 222                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)     /* lcd_data3.lcd_data3 */
 223                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data4.lcd_data4 */
 224                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data5.lcd_data5 */
 225                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data6.lcd_data6 */
 226                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data7.lcd_data7 */
 227                         AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data8.lcd_data8 */
 228                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data9.lcd_data9 */
 229                         AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data10.lcd_data10 */
 230                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data11.lcd_data11 */
 231                         AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data12.lcd_data12 */
 232                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data13.lcd_data13 */
 233                         AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data14.lcd_data14 */
 234                         AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data15.lcd_data15 */
 235                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)     /* lcd_vsync.lcd_vsync */
 236                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)     /* lcd_hsync.lcd_hsync */
 237                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)     /* lcd_pclk.lcd_pclk */
 238                         AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)     /* lcd_ac_bias_en.lcd_ac_bias_en */
 239                 >;
 240         };
 241
 242         lcd_pins_sleep: lcd_pins_sleep {
 243                 pinctrl-single,pins = <
 244                         AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad8.lcd_data23 */
 245                         AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad9.lcd_data22 */
 246                         AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad10.lcd_data21 */
 247                         AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad11.lcd_data20 */
 248                         AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad12.lcd_data19 */
 249                         AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad13.lcd_data18 */
 250                         AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad14.lcd_data17 */
 251                         AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.lcd_data16 */
 252                         AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)   /* lcd_data0.lcd_data0 */
 253                         AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)   /* lcd_data1.lcd_data1 */
 254                         AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)   /* lcd_data2.lcd_data2 */
 255                         AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)   /* lcd_data3.lcd_data3 */
 256                         AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)   /* lcd_data4.lcd_data4 */
 257                         AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)   /* lcd_data5.lcd_data5 */
 258                         AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)   /* lcd_data6.lcd_data6 */
 259                         AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)   /* lcd_data7.lcd_data7 */
 260                         AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)   /* lcd_data8.lcd_data8 */
 261                         AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)   /* lcd_data9.lcd_data9 */
 262                         AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)   /* lcd_data10.lcd_data10 */
 263                         AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)   /* lcd_data11.lcd_data11 */
 264                         AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)   /* lcd_data12.lcd_data12 */
 265                         AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)   /* lcd_data13.lcd_data13 */
 266                         AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)   /* lcd_data14.lcd_data14 */
 267                         AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)   /* lcd_data15.lcd_data15 */
 268                         AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_vsync.lcd_vsync */
 269                         AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_hsync.lcd_hsync */
 270                         AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_pclk.lcd_pclk */
 271                         AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_ac_bias_en.lcd_ac_bias_en */
 272                 >;
 273         };
 274
 275
 276         user_leds_s0: user_leds_s0 {
 277                 pinctrl-single,pins = <
 278                         AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad4.gpio1_4 */
 279                         AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad5.gpio1_5 */
 280                         AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad6.gpio1_6 */
 281                         AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad7.gpio1_7 */
 282                 >;
 283         };
 284
 285         gpio_keys_s0: gpio_keys_s0 {
 286                 pinctrl-single,pins = <
 287                         AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_oen_ren.gpio2_3 */
 288                         AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_advn_ale.gpio2_2 */
 289                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_wait0.gpio0_30 */
 290                         AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ben0_cle.gpio2_5 */
 291                 >;
 292         };
 293
 294         i2c0_pins: pinmux_i2c0_pins {
 295                 pinctrl-single,pins = <
 296                         AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_sda.i2c0_sda */
 297                         AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_scl.i2c0_scl */
 298                 >;
 299         };
 300
 301         uart0_pins: pinmux_uart0_pins {
 302                 pinctrl-single,pins = <
 303                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart0_rxd.uart0_rxd */
 304                         AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart0_txd.uart0_txd */
 305                 >;
 306         };
 307
 308         clkout2_pin: pinmux_clkout2_pin {
 309                 pinctrl-single,pins = <
 310                         AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)    /* xdma_event_intr1.clkout2 */
 311                 >;
 312         };
 313
 314         ecap2_pins: backlight_pins {
 315                 pinctrl-single,pins = <
 316                         AM33XX_IOPAD(0x99c, MUX_MODE4)  /* mcasp0_ahclkr.ecap2_in_pwm2_out */
 317                 >;
 318         };
 319
 320         cpsw_default: cpsw_default {
 321                 pinctrl-single,pins = <
 322                         /* Slave 1 */
 323                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txen.rgmii1_tctl */
 324                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxdv.rgmii1_rctl */
 325                         AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd3.rgmii1_td3 */
 326                         AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd2.rgmii1_td2 */
 327                         AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd1.rgmii1_td1 */
 328                         AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd0.rgmii1_td0 */
 329                         AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txclk.rgmii1_tclk */
 330                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxclk.rgmii1_rclk */
 331                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd3.rgmii1_rd3 */
 332                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd2.rgmii1_rd2 */
 333                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd1.rgmii1_rd1 */
 334                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd0.rgmii1_rd0 */
 335
 336                         /* Slave 2 */
 337                         AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a0.rgmii2_tctl */
 338                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a1.rgmii2_rctl */
 339                         AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a2.rgmii2_td3 */
 340                         AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a3.rgmii2_td2 */
 341                         AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a4.rgmii2_td1 */
 342                         AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a5.rgmii2_td0 */
 343                         AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a6.rgmii2_tclk */
 344                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a7.rgmii2_rclk */
 345                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a8.rgmii2_rd3 */
 346                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a9.rgmii2_rd2 */
 347                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a10.rgmii2_rd1 */
 348                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a11.rgmii2_rd0 */
 349                 >;
 350         };
 351
 352         cpsw_sleep: cpsw_sleep {
 353                 pinctrl-single,pins = <
 354                         /* Slave 1 reset value */
 355                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 356                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 357                         AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 358                         AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 359                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 360                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 361                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 362                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 363                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 364                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 365                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 366                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 367
 368                         /* Slave 2 reset value*/
 369                         AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
 370                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
 371                         AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
 372                         AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 373                         AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
 374                         AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 375                         AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
 376                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 377                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 378                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
 379                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
 380                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 381                 >;
 382         };
 383
 384         davinci_mdio_default: davinci_mdio_default {
 385                 pinctrl-single,pins = <
 386                         /* MDIO */
 387                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 388                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 389                 >;
 390         };
 391
 392         davinci_mdio_sleep: davinci_mdio_sleep {
 393                 pinctrl-single,pins = <
 394                         /* MDIO reset value */
 395                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 396                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 397                 >;
 398         };
 399
 400         mmc1_pins: pinmux_mmc1_pins {
 401                 pinctrl-single,pins = <
 402                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)              /* spi0_cs1.gpio0_6 */
 403                         AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat0.mmc0_dat0 */
 404                         AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat1.mmc0_dat1 */
 405                         AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat2.mmc0_dat2 */
 406                         AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat3.mmc0_dat3 */
 407                         AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_cmd.mmc0_cmd */
 408                         AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_clk.mmc0_clk */
 409                         AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4)              /* mcasp0_aclkr.mmc0_sdwp */
 410                 >;
 411         };
 412
 413         mcasp1_pins: mcasp1_pins {
 414                 pinctrl-single,pins = <
 415                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 416                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 417                         AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 418                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 419                 >;
 420         };
 421
 422         mcasp1_pins_sleep: mcasp1_pins_sleep {
 423                 pinctrl-single,pins = <
 424                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 425                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 426                         AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 427                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 428                 >;
 429         };
 430
 431         mmc2_pins: pinmux_mmc2_pins {
 432                 pinctrl-single,pins = <
 433                         AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 434                         AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 435                         AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 436                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 437                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 438                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 439                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 440                 >;
 441         };
 442
 443         wl12xx_gpio: pinmux_wl12xx_gpio {
 444                 pinctrl-single,pins = <
 445                         AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 446                 >;
 447         };
 448 };
 449
 450 &uart0 {
 451         pinctrl-names = "default";
 452         pinctrl-0 = <&uart0_pins>;
 453
 454         status = "okay";
 455 };
 456
 457 &i2c0 {
 458         pinctrl-names = "default";
 459         pinctrl-0 = <&i2c0_pins>;
 460
 461         status = "okay";
 462         clock-frequency = <400000>;
 463
 464         tps: tps@2d {
 465                 reg = <0x2d>;
 466         };
 467
 468         lis331dlh: lis331dlh@18 {
 469                 compatible = "st,lis331dlh", "st,lis3lv02d";
 470                 reg = <0x18>;
 471                 Vdd-supply = <&lis3_reg>;
 472                 Vdd_IO-supply = <&lis3_reg>;
 473
 474                 st,click-single-x;
 475                 st,click-single-y;
 476                 st,click-single-z;
 477                 st,click-thresh-x = <10>;
 478                 st,click-thresh-y = <10>;
 479                 st,click-thresh-z = <10>;
 480                 st,irq1-click;
 481                 st,irq2-click;
 482                 st,wakeup-x-lo;
 483                 st,wakeup-x-hi;
 484                 st,wakeup-y-lo;
 485                 st,wakeup-y-hi;
 486                 st,wakeup-z-lo;
 487                 st,wakeup-z-hi;
 488                 st,min-limit-x = <120>;
 489                 st,min-limit-y = <120>;
 490                 st,min-limit-z = <140>;
 491                 st,max-limit-x = <550>;
 492                 st,max-limit-y = <550>;
 493                 st,max-limit-z = <750>;
 494         };
 495
 496         tlv320aic3106: tlv320aic3106@1b {
 497                 #sound-dai-cells = <0>;
 498                 compatible = "ti,tlv320aic3106";
 499                 reg = <0x1b>;
 500                 status = "okay";
 501
 502                 /* Regulators */
 503                 AVDD-supply = <&vaux2_reg>;
 504                 IOVDD-supply = <&vaux2_reg>;
 505                 DRVDD-supply = <&vaux2_reg>;
 506                 DVDD-supply = <&vbat>;
 507         };
 508 };
 509
 510 &usb {
 511         status = "okay";
 512 };
 513
 514 &usb_ctrl_mod {
 515         status = "okay";
 516 };
 517
 518 &usb0_phy {
 519         status = "okay";
 520 };
 521
 522 &usb1_phy {
 523         status = "okay";
 524 };
 525
 526 &usb0 {
 527         status = "okay";
 528 };
 529
 530 &usb1 {
 531         status = "okay";
 532         dr_mode = "host";
 533 };
 534
 535 &cppi41dma  {
 536         status = "okay";
 537 };
 538
 539 &epwmss2 {
 540         status = "okay";
 541
 542         ecap2: ecap@48304100 {
 543                 status = "okay";
 544                 pinctrl-names = "default";
 545                 pinctrl-0 = <&ecap2_pins>;
 546         };
 547 };
 548
 549 #include "tps65910.dtsi"
 550
 551 &tps {
 552         vcc1-supply = <&vbat>;
 553         vcc2-supply = <&vbat>;
 554         vcc3-supply = <&vbat>;
 555         vcc4-supply = <&vbat>;
 556         vcc5-supply = <&vbat>;
 557         vcc6-supply = <&vbat>;
 558         vcc7-supply = <&vbat>;
 559         vccio-supply = <&vbat>;
 560
 561         regulators {
 562                 vrtc_reg: regulator@0 {
 563                         regulator-always-on;
 564                 };
 565
 566                 vio_reg: regulator@1 {
 567                         regulator-always-on;
 568                 };
 569
 570                 vdd1_reg: regulator@2 {
 571                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 572                         regulator-name = "vdd_mpu";
 573                         regulator-min-microvolt = <912500>;
 574                         regulator-max-microvolt = <1351500>;
 575                         regulator-boot-on;
 576                         regulator-always-on;
 577                 };
 578
 579                 vdd2_reg: regulator@3 {
 580                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 581                         regulator-name = "vdd_core";
 582                         regulator-min-microvolt = <912500>;
 583                         regulator-max-microvolt = <1150000>;
 584                         regulator-boot-on;
 585                         regulator-always-on;
 586                 };
 587
 588                 vdd3_reg: regulator@4 {
 589                         regulator-always-on;
 590                 };
 591
 592                 vdig1_reg: regulator@5 {
 593                         regulator-always-on;
 594                 };
 595
 596                 vdig2_reg: regulator@6 {
 597                         regulator-always-on;
 598                 };
 599
 600                 vpll_reg: regulator@7 {
 601                         regulator-always-on;
 602                 };
 603
 604                 vdac_reg: regulator@8 {
 605                         regulator-always-on;
 606                 };
 607
 608                 vaux1_reg: regulator@9 {
 609                         regulator-always-on;
 610                 };
 611
 612                 vaux2_reg: regulator@10 {
 613                         regulator-always-on;
 614                 };
 615
 616                 vaux33_reg: regulator@11 {
 617                         regulator-always-on;
 618                 };
 619
 620                 vmmc_reg: regulator@12 {
 621                         regulator-min-microvolt = <1800000>;
 622                         regulator-max-microvolt = <3300000>;
 623                         regulator-always-on;
 624                 };
 625         };
 626 };
 627
 628 &mac {
 629         pinctrl-names = "default", "sleep";
 630         pinctrl-0 = <&cpsw_default>;
 631         pinctrl-1 = <&cpsw_sleep>;
 632         dual_emac = <1>;
 633         status = "okay";
 634 };
 635
 636 &davinci_mdio {
 637         pinctrl-names = "default", "sleep";
 638         pinctrl-0 = <&davinci_mdio_default>;
 639         pinctrl-1 = <&davinci_mdio_sleep>;
 640         status = "okay";
 641 };
 642
 643 &cpsw_emac0 {
 644         phy_id = <&davinci_mdio>, <0>;
 645         phy-mode = "rgmii-txid";
 646         dual_emac_res_vlan = <1>;
 647 };
 648
 649 &cpsw_emac1 {
 650         phy_id = <&davinci_mdio>, <1>;
 651         phy-mode = "rgmii-txid";
 652         dual_emac_res_vlan = <2>;
 653 };
 654
 655 &mmc1 {
 656         status = "okay";
 657         vmmc-supply = <&vmmc_reg>;
 658         bus-width = <4>;
 659         pinctrl-names = "default";
 660         pinctrl-0 = <&mmc1_pins>;
 661         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 662 };
 663
 664 &sham {
 665         status = "okay";
 666 };
 667
 668 &aes {
 669         status = "okay";
 670 };
 671
 672 &gpio0 {
 673         ti,no-reset-on-init;
 674 };
 675
 676 &mmc2 {
 677         status = "okay";
 678         vmmc-supply = <&wl12xx_vmmc>;
 679         ti,non-removable;
 680         bus-width = <4>;
 681         cap-power-off-card;
 682         keep-power-in-suspend;
 683         pinctrl-names = "default";
 684         pinctrl-0 = <&mmc2_pins>;
 685
 686         #address-cells = <1>;
 687         #size-cells = <0>;
 688         wlcore: wlcore@2 {
 689                 compatible = "ti,wl1271";
 690                 reg = <2>;
 691                 interrupt-parent = <&gpio0>;
 692                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
 693                 ref-clock-frequency = <38400000>;
 694         };
 695 };
 696
 697 &mcasp1 {
 698         #sound-dai-cells = <0>;
 699         pinctrl-names = "default", "sleep";
 700         pinctrl-0 = <&mcasp1_pins>;
 701         pinctrl-1 = <&mcasp1_pins_sleep>;
 702
 703         status = "okay";
 704
 705         op-mode = <0>;          /* MCASP_IIS_MODE */
 706         tdm-slots = <2>;
 707         /* 4 serializers */
 708         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 709                 0 0 1 2
 710         >;
 711         tx-num-evt = <32>;
 712         rx-num-evt = <32>;
 713 };
 714
 715 &tscadc {
 716         status = "okay";
 717         tsc {
 718                 ti,wires = <4>;
 719                 ti,x-plate-resistance = <200>;
 720                 ti,coordinate-readouts = <5>;
 721                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 722         };
 723 };
 724
 725 &lcdc {
 726         status = "okay";
 727
 728         blue-and-red-wiring = "crossed";
 729 };
 730
 731 &rtc {
 732         clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>;
 733         clock-names = "ext-clk", "int-clk";
 734 };