4 - compatible: value should be one of the following
5 "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
6 "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
7 - reg: physical base address and length of the registers set for the device
8 - interrupts: should contain DSI interrupt
9 - clocks: list of clock specifiers, must contain an entry for each required
11 - clock-names: should include "bus_clk"and "pll_clk" entries
12 - phys: list of phy specifiers, must contain an entry for each required
14 - phy-names: should include "dsim" entry
15 - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
16 - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
17 - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
18 - #address-cells, #size-cells: should be set respectively to <1> and <0>
19 according to DSI host bindings (see MIPI DSI bindings [1])
22 - samsung,power-domain: a phandle to DSIM power domain node
25 Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
28 Device node can contain video interface port nodes according to [2].
29 The following are properties specific to those nodes:
32 - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
34 endpoint node of DSI port (reg = 1):
35 - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
37 - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
39 [1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
40 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
45 compatible = "samsung,exynos4210-mipi-dsi";
46 reg = <0x11C80000 0x10000>;
47 interrupts = <0 79 0>;
48 clocks = <&clock 286>, <&clock 143>;
49 clock-names = "bus_clk", "pll_clk";
52 vddcore-supply = <&vusb_reg>;
53 vddio-supply = <&vmipi_reg>;
54 samsung,power-domain = <&pd_lcd0>;
57 samsung,pll-clock-frequency = <24000000>;
64 remote-endpoint = <&dsi_ep>;
76 samsung,burst-clock-frequency = <500000000>;
77 samsung,esc-clock-frequency = <20000000>;
78 remote-endpoint = <&panel_ep>;