Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml

   1 # SPDX-License-Identifier: GPL-2.0
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Allwinner A10 Pin Controller Device Tree Bindings
   8
   9 maintainers:
  10   - Chen-Yu Tsai <wens@csie.org>
  11   - Maxime Ripard <mripard@kernel.org>
  12
  13 properties:
  14   "#gpio-cells":
  15     const: 3
  16     description:
  17       GPIO consumers must use three arguments, first the number of the
  18       bank, then the pin number inside that bank, and finally the GPIO
  19       flags.
  20
  21   "#interrupt-cells":
  22     const: 3
  23     description:
  24       Interrupts consumers must use three arguments, first the number
  25       of the bank, then the pin number inside that bank, and finally
  26       the interrupts flags.
  27
  28   compatible:
  29     enum:
  30       - allwinner,sun4i-a10-pinctrl
  31       - allwinner,sun5i-a10s-pinctrl
  32       - allwinner,sun5i-a13-pinctrl
  33       - allwinner,sun6i-a31-pinctrl
  34       - allwinner,sun6i-a31-r-pinctrl
  35       - allwinner,sun6i-a31s-pinctrl
  36       - allwinner,sun7i-a20-pinctrl
  37       - allwinner,sun8i-a23-pinctrl
  38       - allwinner,sun8i-a23-r-pinctrl
  39       - allwinner,sun8i-a33-pinctrl
  40       - allwinner,sun8i-a83t-pinctrl
  41       - allwinner,sun8i-a83t-r-pinctrl
  42       - allwinner,sun8i-h3-pinctrl
  43       - allwinner,sun8i-h3-r-pinctrl
  44       - allwinner,sun8i-r40-pinctrl
  45       - allwinner,sun8i-v3-pinctrl
  46       - allwinner,sun8i-v3s-pinctrl
  47       - allwinner,sun9i-a80-pinctrl
  48       - allwinner,sun9i-a80-r-pinctrl
  49       - allwinner,sun50i-a64-pinctrl
  50       - allwinner,sun50i-a64-r-pinctrl
  51       - allwinner,sun50i-a100-pinctrl
  52       - allwinner,sun50i-a100-r-pinctrl
  53       - allwinner,sun50i-h5-pinctrl
  54       - allwinner,sun50i-h6-pinctrl
  55       - allwinner,sun50i-h6-r-pinctrl
  56       - allwinner,sun50i-h616-pinctrl
  57       - allwinner,sun50i-h616-r-pinctrl
  58       - allwinner,suniv-f1c100s-pinctrl
  59       - nextthing,gr8-pinctrl
  60
  61   reg:
  62     maxItems: 1
  63
  64   interrupts:
  65     minItems: 1
  66     maxItems: 8
  67     description:
  68       One interrupt per external interrupt bank supported on the
  69       controller, sorted by bank number ascending order.
  70
  71   clocks:
  72     items:
  73       - description: Bus Clock
  74       - description: High Frequency Oscillator
  75       - description: Low Frequency Oscillator
  76
  77   clock-names:
  78     items:
  79       - const: apb
  80       - const: hosc
  81       - const: losc
  82
  83   resets:
  84     maxItems: 1
  85
  86   gpio-controller: true
  87   interrupt-controller: true
  88   gpio-line-names: true
  89
  90   input-debounce:
  91     description:
  92       Debouncing periods in microseconds, one period per interrupt
  93       bank found in the controller
  94     $ref: /schemas/types.yaml#/definitions/uint32-array
  95     minItems: 1
  96     maxItems: 8
  97
  98 patternProperties:
  99   # It's pretty scary, but the basic idea is that:
 100   #   - One node name can start with either s- or r- for PRCM nodes,
 101   #   - Then, the name itself can be any repetition of <string>- (to
 102   #     accomodate with nodes like uart4-rts-cts-pins), where each
 103   #     string can be either starting with 'p' but in a string longer
 104   #     than 3, or something that doesn't start with 'p',
 105   #   - Then, the bank name is optional and will be between pa and pg,
 106   #     pl or pm. Some pins groups that have several options will have
 107   #     the pin numbers then,
 108   #   - Finally, the name will end with either -pin or pins.
 109
 110   "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$":
 111     type: object
 112
 113     properties:
 114       pins: true
 115       function: true
 116       bias-disable: true
 117       bias-pull-up: true
 118       bias-pull-down: true
 119
 120       drive-strength:
 121         $ref: /schemas/types.yaml#/definitions/uint32
 122         enum: [10, 20, 30, 40]
 123
 124     required:
 125       - pins
 126       - function
 127
 128     additionalProperties: false
 129
 130   "^vcc-p[a-hlm]-supply$":
 131     description:
 132       Power supplies for pin banks.
 133
 134 required:
 135   - "#gpio-cells"
 136   - "#interrupt-cells"
 137   - compatible
 138   - reg
 139   - interrupts
 140   - clocks
 141   - clock-names
 142   - gpio-controller
 143   - interrupt-controller
 144
 145 allOf:
 146   # FIXME: We should have the pin bank supplies here, but not a lot of
 147   # boards are defining it at the moment so it would generate a lot of
 148   # warnings.
 149
 150   - $ref: "pinctrl.yaml#"
 151   - if:
 152       properties:
 153         compatible:
 154           enum:
 155             - allwinner,sun50i-h616-pinctrl
 156
 157     then:
 158       properties:
 159         interrupts:
 160           minItems: 8
 161
 162   - if:
 163       properties:
 164         compatible:
 165           enum:
 166             - allwinner,sun50i-a100-pinctrl
 167
 168     then:
 169       properties:
 170         interrupts:
 171           minItems: 7
 172           maxItems: 7
 173
 174   - if:
 175       properties:
 176         compatible:
 177           enum:
 178             - allwinner,sun9i-a80-pinctrl
 179
 180     then:
 181       properties:
 182         interrupts:
 183           minItems: 5
 184           maxItems: 5
 185
 186   - if:
 187       properties:
 188         compatible:
 189           enum:
 190             - allwinner,sun6i-a31-pinctrl
 191             - allwinner,sun6i-a31s-pinctrl
 192             - allwinner,sun50i-h6-pinctrl
 193
 194     then:
 195       properties:
 196         interrupts:
 197           minItems: 4
 198           maxItems: 4
 199
 200   - if:
 201       properties:
 202         compatible:
 203           enum:
 204             - allwinner,sun8i-a23-pinctrl
 205             - allwinner,sun8i-a83t-pinctrl
 206             - allwinner,sun50i-a64-pinctrl
 207             - allwinner,sun50i-h5-pinctrl
 208             - allwinner,suniv-f1c100s-pinctrl
 209
 210     then:
 211       properties:
 212         interrupts:
 213           minItems: 3
 214           maxItems: 3
 215
 216   - if:
 217       properties:
 218         compatible:
 219           enum:
 220             - allwinner,sun6i-a31-r-pinctrl
 221             - allwinner,sun8i-a33-pinctrl
 222             - allwinner,sun8i-h3-pinctrl
 223             - allwinner,sun8i-v3-pinctrl
 224             - allwinner,sun8i-v3s-pinctrl
 225             - allwinner,sun9i-a80-r-pinctrl
 226             - allwinner,sun50i-h6-r-pinctrl
 227
 228     then:
 229       properties:
 230         interrupts:
 231           minItems: 2
 232           maxItems: 2
 233
 234   - if:
 235       properties:
 236         compatible:
 237           enum:
 238             - allwinner,sun4i-a10-pinctrl
 239             - allwinner,sun5i-a10s-pinctrl
 240             - allwinner,sun5i-a13-pinctrl
 241             - allwinner,sun7i-a20-pinctrl
 242             - allwinner,sun8i-a23-r-pinctrl
 243             - allwinner,sun8i-a83t-r-pinctrl
 244             - allwinner,sun8i-h3-r-pinctrl
 245             - allwinner,sun8i-r40-pinctrl
 246             - allwinner,sun50i-a64-r-pinctrl
 247             - allwinner,sun50i-a100-r-pinctrl
 248             - nextthing,gr8-pinctrl
 249
 250     then:
 251       properties:
 252         interrupts:
 253           minItems: 1
 254           maxItems: 1
 255
 256 additionalProperties: false
 257
 258 examples:
 259   - |
 260     #include <dt-bindings/clock/sun5i-ccu.h>
 261
 262     pio: pinctrl@1c20800 {
 263         compatible = "allwinner,sun5i-a13-pinctrl";
 264         reg = <0x01c20800 0x400>;
 265         interrupts = <28>;
 266         clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
 267         clock-names = "apb", "hosc", "losc";
 268         gpio-controller;
 269         interrupt-controller;
 270         #interrupt-cells = <3>;
 271         #gpio-cells = <3>;
 272
 273         uart1_pe_pins: uart1-pe-pins {
 274             pins = "PE10", "PE11";
 275             function = "uart1";
 276         };
 277
 278         uart1_pg_pins: uart1-pg-pins {
 279             pins = "PG3", "PG4";
 280             function = "uart1";
 281         };
 282     };