1 * Amlogic G12A USB3 + PCIE Combo PHY binding
4 - compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
5 - #phys-cells: must be 1. The cell number is used to select the phy mode
6 as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
7 - reg: The base address and length of the registers
8 - clocks: a phandle to the 100MHz reference clock of this PHY
9 - clock-names: must be "ref_clk"
10 - resets: phandle to the reset lines for the PHY control
11 - reset-names: must be "phy"
14 usb3_pcie_phy: phy@46000 {
15 compatible = "amlogic,g12a-usb3-pcie-phy";
16 reg = <0x0 0x46000 0x0 0x2000>;
17 clocks = <&clkc CLKID_PCIE_PLL>;
18 clock-names = "ref_clk";
19 resets = <&reset RESET_PCIE_PHY>;