1 * Dialog DA9062 Power Management Integrated Circuit (PMIC)
3 Product information for the DA9062 and DA9061 devices can be found here:
4 - http://www.dialog-semiconductor.com/products/da9062
5 - http://www.dialog-semiconductor.com/products/da9061
7 The DA9062 PMIC consists of:
9 Device Supply Names Description
10 ------ ------------ -----------
11 da9062-regulator : : LDOs & BUCKs
12 da9062-rtc : : Real-Time Clock
13 da9062-onkey : : On Key
14 da9062-watchdog : : Watchdog Timer
15 da9062-thermal : : Thermal
17 The DA9061 PMIC consists of:
19 Device Supply Names Description
20 ------ ------------ -----------
21 da9062-regulator : : LDOs & BUCKs
22 da9062-onkey : : On Key
23 da9062-watchdog : : Watchdog Timer
24 da9062-thermal : : Thermal
30 - compatible : Should be
31 "dlg,da9062" for DA9062
32 "dlg,da9061" for DA9061
33 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
34 modified to match the chip's OTP settings).
35 - interrupts : IRQ line information.
36 - interrupt-controller
38 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
39 further information on IRQ bindings.
43 - regulators : This node defines the settings for the LDOs and BUCKs.
44 The DA9062 regulators are bound using their names listed below:
55 The DA9061 regulators are bound using their names listed below:
65 The component follows the standard regulator framework and the bindings
66 details of individual regulator device can be found in:
67 Documentation/devicetree/bindings/regulator/regulator.txt
69 - rtc : This node defines settings required for the Real-Time Clock associated
70 with the DA9062. There are currently no entries in this binding, however
71 compatible = "dlg,da9062-rtc" should be added if a node is created.
73 - onkey : See ../input/da9062-onkey.txt
75 - watchdog: See ../watchdog/da9062-watchdog.txt
77 - thermal : See ../thermal/da9062-thermal.txt
82 compatible = "dlg,da9062";
84 interrupt-parent = <&gpio6>;
85 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
89 compatible = "dlg,da9062-rtc";
94 regulator-name = "BUCK1";
95 regulator-min-microvolt = <300000>;
96 regulator-max-microvolt = <1570000>;
97 regulator-min-microamp = <500000>;
98 regulator-max-microamp = <2000000>;
102 regulator-name = "LDO_1";
103 regulator-min-microvolt = <900000>;
104 regulator-max-microvolt = <3600000>;