Andreas Schneider [Mon, 6 Jun 2011 20:22:34 +0000 (22:22 +0200)]
s3-waf: Fix pthreadpool build which needs librt now.
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Mon Jun 6 23:31:09 CEST 2011 on sn-devel-104
Jeremy Allison [Fri, 3 Jun 2011 17:22:44 +0000 (10:22 -0700)]
Fix bug #8197 - winbind does not properly detect when a DC connection is dead.
Only waiting for writability doesn't get fd errors back with poll.
So always begin by selecting for readability, and if we get it then
see if bytes were available to read or it really is an error condition.
If bytes were available, remove the select on read as we know we
will retrieve the error when we've finished writing and start
reading the reply (or the write will timeout or fail).
Metze and Volker please check.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Mon Jun 6 21:53:16 CEST 2011 on sn-devel-104
Volker Lendecke [Mon, 6 Jun 2011 15:03:06 +0000 (17:03 +0200)]
s3: Remove a pointless if-statement
We are here only if we have more than one num_pending
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Mon Jun 6 18:21:17 CEST 2011 on sn-devel-104
Volker Lendecke [Mon, 6 Jun 2011 10:41:26 +0000 (12:41 +0200)]
s3: Fix two debug messages
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Mon Jun 6 14:11:06 CEST 2011 on sn-devel-104
Björn Jacke [Sun, 5 Jun 2011 19:32:11 +0000 (21:32 +0200)]
s4/server: simplify and replace bad portable gettimeofday by time
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Björn Jacke <bj@sernet.de>
Autobuild-Date: Mon Jun 6 12:58:26 CEST 2011 on sn-devel-104
Björn Jacke [Sun, 5 Jun 2011 19:30:16 +0000 (21:30 +0200)]
s3/pthreadpool: replace bad portable gettimeofday by clock_gettime
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Andrew Bartlett [Mon, 6 Jun 2011 06:47:32 +0000 (16:47 +1000)]
s3-s4-param: Add hooks for parametric options in the s3/s4 glue layer
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Mon Jun 6 10:48:53 CEST 2011 on sn-devel-104
Andrew Bartlett [Mon, 6 Jun 2011 01:16:19 +0000 (11:16 +1000)]
s3-passdb use new loadparm_init_s3 rather than reloading the smb.conf
Andrew Bartlett [Mon, 6 Jun 2011 04:58:28 +0000 (14:58 +1000)]
s4-modules Remove lp_ctx from init functions that no longer need it
Now that we don't allow the smb.conf to change the modules dir, many
functions that simply load modules or initialise a subsytem that may
load modules no longer need an lp_ctx.
Andrew Bartlett
Andrew Bartlett [Mon, 6 Jun 2011 04:39:19 +0000 (14:39 +1000)]
s4-param Remove 'modules dir'
The Samba waf build ensures that dyn_MODULESDIR is always correct
(even for in-tree binaries), so we don't need to allow the user to
configure this at run time.
Andrew Bartlett
Andrew Bartlett [Mon, 6 Jun 2011 04:37:06 +0000 (14:37 +1000)]
lib/util use modules_path(), data_path() and shlib_ext() from source3
This brings these helpful utility functions in common, as they are not
based on either loadparm system.
(The 'modules dir' parameter from Samba4 will shortly be removed, so
there is no loss in functionality)
Andrew Bartlett
Andrew Bartlett [Mon, 6 Jun 2011 04:22:12 +0000 (14:22 +1000)]
s3-lib Remove unused lib_path()
Andrew Bartlett [Wed, 1 Jun 2011 13:22:24 +0000 (23:22 +1000)]
s4-param Add hook between Samba3 and Samba4 loadparm systems.
In the top level build, this allows calls to code that requires a
lpcfg_ style loadparm_context, while using the global parameters
loaded from the source3 loadparm code.
Andrew Bartlett
Andrew Bartlett [Mon, 6 Jun 2011 01:38:04 +0000 (11:38 +1000)]
s4-param make lpcfg_sam_name() cope with PDC and BDC roles
These roles (ROLE_DOMAIN_CONTROLLER is ROLE_DOMAIN_BDC) will come in
from the s3 loadparm.
Andrew Bartlett
Andrew Bartlett [Mon, 6 Jun 2011 00:56:19 +0000 (10:56 +1000)]
s3-param always allow the realm parameter
Andrew Bartlett [Thu, 2 Jun 2011 08:56:10 +0000 (18:56 +1000)]
s4-param Remove 'sid generator'
This was only used by the Fedora DS backend for Samba4. We agreed to
no longer support external LDAP backends.
Andrew Bartlett
Andrew Bartlett [Thu, 2 Jun 2011 05:49:36 +0000 (15:49 +1000)]
s4-param Remove 'idmap database'
This is now just idmap.ldb in the private dir, which remains.
Andrew Bartlett [Thu, 2 Jun 2011 05:47:44 +0000 (15:47 +1000)]
s4-param Remove 'secrets database' parameter
This is now just secrets.ldb in the private dir, which remains.
Andrew Bartlett [Thu, 2 Jun 2011 05:43:40 +0000 (15:43 +1000)]
s4-param Remove 'sam database' parameter
This now just relies on the private dir parameter, which remains.
Andrew Bartlett
Andrew Bartlett [Wed, 1 Jun 2011 12:16:08 +0000 (22:16 +1000)]
libcli/util Remove prototype for ntstatus_dos_equal()
This was removed recently.
Andrew Tridgell [Mon, 6 Jun 2011 01:31:23 +0000 (11:31 +1000)]
s4-ipv6: fill in family when initialising from sockaddr
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Mon Jun 6 05:35:36 CEST 2011 on sn-devel-104
Andrew Tridgell [Mon, 6 Jun 2011 00:43:05 +0000 (10:43 +1000)]
s4-ipv6: removed the old unused ipv6 code in dcerpc_sock.c
the code is now generic to both V4 and V6
Andrew Tridgell [Mon, 6 Jun 2011 00:42:28 +0000 (10:42 +1000)]
s4-ipv6: fix the address family for IPv6 string addresses
Andrew Tridgell [Mon, 6 Jun 2011 00:13:41 +0000 (10:13 +1000)]
s4-ipv6: allow for IPv6 in dcerpc socket calls
Andrew Tridgell [Mon, 6 Jun 2011 00:13:20 +0000 (10:13 +1000)]
s4-ipv6: allow for IPv6 in resolver top level calls
Andrew Tridgell [Mon, 6 Jun 2011 00:11:53 +0000 (10:11 +1000)]
s4-ipv6: use the server address family
don't force v4 in connect_multi
Andrew Tridgell [Mon, 6 Jun 2011 00:11:13 +0000 (10:11 +1000)]
util-net: added is_ipaddress_v6()
Andrew Tridgell [Sun, 5 Jun 2011 22:09:02 +0000 (08:09 +1000)]
s4-ipv6: cope with IPv6 in our async DNS client code
Andrew Tridgell [Fri, 3 Jun 2011 22:22:30 +0000 (08:22 +1000)]
s4-script: install some of the samba scripts in bin/ during build
Andrew Tridgell [Fri, 3 Jun 2011 22:20:54 +0000 (08:20 +1000)]
s4-testparm: testparm is now part of samba_tool
Andrew Tridgell [Fri, 3 Jun 2011 21:59:54 +0000 (07:59 +1000)]
s4-ipv6: enable IPv6 by default
it now passes all tests
Andrew Tridgell [Fri, 3 Jun 2011 07:57:57 +0000 (17:57 +1000)]
s4-ipv6: fixed binding to ipv4 addresses
Andrew Tridgell [Fri, 3 Jun 2011 01:43:38 +0000 (11:43 +1000)]
s4-ipv6: removed an old comment
the comment is not correct any more
Andrew Tridgell [Fri, 3 Jun 2011 01:43:09 +0000 (11:43 +1000)]
s4-ipv6: don't add link local addresses to DNS
these make no sense as DNS addresses
Andrew Tridgell [Thu, 2 Jun 2011 08:20:13 +0000 (18:20 +1000)]
s4-ipv6: ensure wrepl server does not use ipv6
WINS only does IPv4
Andrew Tridgell [Thu, 2 Jun 2011 07:10:17 +0000 (17:10 +1000)]
ipv6: always try to convert as a numeric address first
This avoids unnecessary name lookups, plus it fixes a problem with
using interpret_string_addr*() with the wildcard IPv6 address
Andrew Tridgell [Thu, 2 Jun 2011 07:09:17 +0000 (17:09 +1000)]
s4-ipv6: added IPv6 support to samba_dnsupdate
Andrew Tridgell [Thu, 2 Jun 2011 05:40:28 +0000 (15:40 +1000)]
s4-ipv6: update callers to load_interface_list()
Andrew Tridgell [Thu, 2 Jun 2011 05:39:54 +0000 (15:39 +1000)]
s4-ipv6: allow ipv6 to be enabled/disabled in smb.conf
this adds the parametric option ipv6:enable=true/false
It defaults to false for now, until the remaining issues with testing
of ipv6 are resolved
Andrew Tridgell [Thu, 12 May 2011 20:53:26 +0000 (22:53 +0200)]
s4-gpo: fixed display of GPO version numbers
Andrew Tridgell [Thu, 12 May 2011 11:08:45 +0000 (13:08 +0200)]
s4-ipv6: the wins replication server can only handle IPv4
Andrew Tridgell [Thu, 12 May 2011 10:38:03 +0000 (12:38 +0200)]
s4-webserver: fixed a talloc reference error on startup failure
Andrew Tridgell [Thu, 12 May 2011 10:37:34 +0000 (12:37 +0200)]
s4-ipv6: only listen on V4 addresses in the NBT server
NBT doesn't do IPv6
Andrew Tridgell [Thu, 12 May 2011 10:36:33 +0000 (12:36 +0200)]
s4-ipv6: use "ip" instead of "ipv4" for servers
this allows stream_setup_socket() to work with both v4 and v6
addresses
Andrew Tridgell [Thu, 12 May 2011 10:35:02 +0000 (12:35 +0200)]
s4-ipv6: use iface_list_wildcard() to listen on IPv6
when we need to listen on a wildcard address, we now listen on a list
of sockets, usually 0.0.0.0 and ::
Andrew Tridgell [Thu, 12 May 2011 10:33:01 +0000 (12:33 +0200)]
s4-ipv6: fixed stream_setup_socket() to handle IPv6
for IP we now detect the address family from the address, rather than
requiring the caller to specify it.
Andrew Tridgell [Thu, 12 May 2011 10:30:16 +0000 (12:30 +0200)]
s4-ipv6: fixed ipv6_listen() to use IPV6_V6ONLY
this changes ipv6_listen() to use IPV6_V6ONLY, and to setup the right
scope id for link local IPv6 addresses
Andrew Tridgell [Thu, 12 May 2011 10:29:21 +0000 (12:29 +0200)]
s4-ipv6: added socket_address_from_sockaddr_storage()
this converts a struct sockaddr_storage to a struct socket_address
Andrew Tridgell [Thu, 12 May 2011 10:27:37 +0000 (12:27 +0200)]
s4-ipv6: added ipv4 functions to interface code
this adds iface_list_first_v4() and iface_list_n_is_v4(). The NBT
server will use these to allow it to listen only for IPv4 addresses.
Andrew Tridgell [Thu, 12 May 2011 10:27:01 +0000 (12:27 +0200)]
s4-ipv6: fixed a warning
Andrew Tridgell [Thu, 12 May 2011 10:26:18 +0000 (12:26 +0200)]
s4-ipv6: allow IPv6 addresses in our interfaces list
Andrew Tridgell [Thu, 12 May 2011 10:25:51 +0000 (12:25 +0200)]
s4-ipv6: changed the default "socket address"
this changes the default socket address to the empty string. This
allows uses to specify 0.0.0.0 meaning to listen only on the IPv4
wildcard address.
Andrew Tridgell [Thu, 12 May 2011 10:23:35 +0000 (12:23 +0200)]
s4-ipv6: added iface_list_wildcard()
this returns a list of wildcard address to listen on, when we don't
have 'bind interfaces only' set. It is a list, not a single address,
we need to listen separately for the IPv6 "::" address from the IPv4
0.0.0.0 address.
This also takes account of the loadparm "socket address" option
Volker Lendecke [Mon, 16 May 2011 12:48:39 +0000 (14:48 +0200)]
nss_wins: Add a stackframe to lookup_byname_backend()
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sun Jun 5 15:17:42 CEST 2011 on sn-devel-104
Volker Lendecke [Mon, 2 May 2011 21:39:09 +0000 (23:39 +0200)]
s3: Make use of name_resolve_bcast in nmblookup
Volker Lendecke [Mon, 25 Apr 2011 16:47:42 +0000 (18:47 +0200)]
s3: Make name_resolve_bcast do parallel lookups to all interfaces
Volker Lendecke [Mon, 25 Apr 2011 16:30:35 +0000 (18:30 +0200)]
s3: Add name_queries_send/recv
Volker Lendecke [Sun, 5 Jun 2011 11:56:39 +0000 (13:56 +0200)]
s3: Fix a valgrind error
For me this fixes
==1950== Invalid read of size 4
==1950== at 0x81EBED5: GUID_equal (uuid.c:239)
==1950== by 0x81E51AB: ndr_syntax_id_equal (ndr_misc.c:35)
==1950== by 0x82EB0D1: get_iface_from_syntax (rpc_common.c:160)
==1950== by 0x82EB25E: get_pipe_name_from_syntax (rpc_common.c:179)
==1950== by 0x8509E4F: close_policy_by_pipe (rpc_handles.c:322)
==1950== by 0x8507941: close_internal_rpc_pipe_hnd (rpc_ncacn_np.c:109)
==1950== by 0x468270: _talloc_free_internal (talloc.c:826)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x80E6487: sam_trusted_domains (winbindd_samr.c:406)
==1950== Address 0x687ea4 is 20 bytes inside a block of size 40 free'd
==1950== at 0x58CDC: free (in /usr/local/lib/valgrind/vgpreload_memcheck-x86-freebsd.so)
==1950== by 0x8507812: free_pipe_rpc_context_internal (rpc_ncacn_np.c:74)
==1950== by 0x8507936: close_internal_rpc_pipe_hnd (rpc_ncacn_np.c:106)
==1950== by 0x468270: _talloc_free_internal (talloc.c:826)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x467EE0: _talloc_free_internal (talloc.c:1268)
==1950== by 0x80E6487: sam_trusted_domains (winbindd_samr.c:406)
==1950== by 0x80C2F85: trusted_domains (winbindd_cache.c:2820)
==1950== by 0x80D5188: winbindd_dual_list_trusted_domains (winbindd_misc.c:162)
==1950== by 0x80E987F: wb_child_request_trigger (winbindd_dual.c:437)
==1950==
Andreas, Guenther, please check!
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sun Jun 5 13:19:39 CEST 2011 on sn-devel-104
Volker Lendecke [Sun, 5 Jun 2011 09:30:43 +0000 (11:30 +0200)]
s3:winbind: Convert WINBINDD_WINS_BYIP to the async API
Volker Lendecke [Sat, 4 Jun 2011 12:10:46 +0000 (14:10 +0200)]
Make samba4.drs.fsmo.python knownfail
This frequently blocks autobuild for me, this time with
Testing for rid role transfer from localdc.samba.example.com to localvampiredc.samba.example.com
ERROR: Failed to initiate transfer of 'rid' role: LDAP error 52 LDAP_UNAVAILABLE - <Failed FSMO transfer: NT_STATUS_IO_TIMEOUT> <>
UNEXPECTED(failure): samba4.drs.fsmo.python(vampire_dc).fsmo.DrsFsmoTestCase.test_RIDMasterTransfer
REASON: _StringException: _StringException: Content-Type: text/x-traceback;charset=utf8,language=python
traceback
36E
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/testtools/runtest.py", line 128, in _run_user
return fn(*args)
File "/usr/lib/python2.6/dist-packages/testtools/testcase.py", line 368, in _run_test_method
testMethod()
File "/memdisk/vlendec/a/b5798/samba4/source4/torture/drs/python/fsmo.py", line 125, in test_RIDMasterTransfer
self._role_transfer(role="rid", role_dn=self.rid_dn)
File "/memdisk/vlendec/a/b5798/samba4/source4/torture/drs/python/fsmo.py", line 97, in _role_transfer
self._net_fsmo_role_transfer(DC=self.dnsname_dc2, role=role)
File "/memdisk/vlendec/a/b5798/samba4/source4/torture/drs/python/fsmo.py", line 68, in _net_fsmo_role_transfer
self.assertEquals(ret, 0, "Transferring role %s to %s has failed!" % (role, DC))
AssertionError: Transferring role rid to localvampiredc.samba.example.com has failed!
0
NT_STATUS_IO_TIMEOUT -- does that mean that sn.samba.org is not powerful enough
to run this test successfully?
Volker
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sat Jun 4 15:24:20 CEST 2011 on sn-devel-104
Volker Lendecke [Sat, 4 Jun 2011 12:18:31 +0000 (14:18 +0200)]
s3: Fix the build on FreeBSD 8
This is probably not the last word on gss_mech_krb5, but for now it fixes
the build on FreeBSD
Jeremy Allison [Fri, 3 Jun 2011 19:55:19 +0000 (12:55 -0700)]
Add the same fix to the S3 event backend as the previous commit added to the tevent poll backend.
Metze please check !
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Sat Jun 4 00:27:37 CEST 2011 on sn-devel-104
Jeremy Allison [Fri, 3 Jun 2011 19:31:11 +0000 (12:31 -0700)]
Fix the poll() backend to correctly respond to POLLHUP|POLLERR returns on a fd selected for TEVENT_FD_WRITE only.
Don't trigger the write handler and remove the POLLOUT flag for this fd. Report errors on TEVENT_FD_READ requests only.
Metze please check !
Jeremy.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Fri Jun 3 22:53:52 CEST 2011 on sn-devel-104
Herb Lewis [Thu, 2 Jun 2011 17:15:18 +0000 (10:15 -0700)]
In samba_version.m4 the test to get the version now returns several
lines instead of the one we really wanted which causes some spurious
output when configure tries to print the samba version when it starts
running. This is only a cosmetic problem but still looks ugly.
Signed-off-by: Jeremy Allison <jra@samba.org>
Herb Lewis [Thu, 2 Jun 2011 17:10:39 +0000 (10:10 -0700)]
Fix warning messages on Freebsd 4.6.2.
Signed-off-by: Jeremy Allison <jra@samba.org>
Rusty Russell [Thu, 2 Jun 2011 04:49:38 +0000 (14:19 +0930)]
lib/tdb/python/tests/simple.py: don't assume TDB ordering.
TDB2 can break this assumption.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Thu Jun 2 12:07:40 CEST 2011 on sn-devel-104
Rusty Russell [Thu, 2 Jun 2011 00:52:06 +0000 (10:22 +0930)]
samba3sam.py: don't assume order of ldb results.
Switching to tdb2 breaks this test horribly, because it relied on the
order of TDB1 traversal. Fix it to sort te results (by db), then
check them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Jeremy Allison [Wed, 1 Jun 2011 23:40:05 +0000 (16:40 -0700)]
Remove another PATH_MAX.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Thu Jun 2 02:51:06 CEST 2011 on sn-devel-104
Jeremy Allison [Wed, 1 Jun 2011 23:07:24 +0000 (16:07 -0700)]
Remove a PATH_MAX.
Jeremy Allison [Wed, 1 Jun 2011 21:51:55 +0000 (14:51 -0700)]
Fix const warnings.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Thu Jun 2 01:02:53 CEST 2011 on sn-devel-104
Jeremy Allison [Wed, 1 Jun 2011 21:51:21 +0000 (14:51 -0700)]
Fix const warning.
Jeremy Allison [Wed, 1 Jun 2011 21:50:49 +0000 (14:50 -0700)]
Fix const warning.
Jeremy Allison [Wed, 1 Jun 2011 21:49:43 +0000 (14:49 -0700)]
release_ip() is only used with CLUSTER_SUPPORT.
Jeremy Allison [Wed, 1 Jun 2011 21:49:03 +0000 (14:49 -0700)]
Fix type mixing warnings.
Jeremy Allison [Wed, 1 Jun 2011 21:45:59 +0000 (14:45 -0700)]
Fix bug where format arguments were reversed. Please compile with -Wall !
Jeremy Allison [Wed, 1 Jun 2011 19:17:43 +0000 (12:17 -0700)]
Move fd_close on error path to be identical to all other error paths.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Wed Jun 1 22:30:03 CEST 2011 on sn-devel-104
Jeremy Allison [Wed, 1 Jun 2011 19:12:26 +0000 (12:12 -0700)]
TALLOC_FREE already checks for null.
Jeremy Allison [Wed, 1 Jun 2011 19:11:53 +0000 (12:11 -0700)]
Fix bug #8175 - smbd deadlock.
Force the open operation (which is the expensive one anyway) to
acquire and release locks in a way compatible with the more common
do_lock check.
Jeremy.
Gregor Beck [Tue, 31 May 2011 16:26:12 +0000 (18:26 +0200)]
s3:net-man: registry enumerate_recursive
Signed-off-by: Michael Adam <obnox@samba.org>
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Wed Jun 1 17:16:05 CEST 2011 on sn-devel-104
Gregor Beck [Tue, 31 May 2011 16:25:53 +0000 (18:25 +0200)]
s3:net-man: registry deletekey & deletekey_recursive
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Tue, 31 May 2011 16:15:38 +0000 (18:15 +0200)]
s3:net-man: missing dot
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Wed, 1 Jun 2011 11:46:14 +0000 (13:46 +0200)]
Revert "s3: Mark sockets in error state writable"
This reverts commit
5f6f71956460d6840c1433b59e20555268b622ac.
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Jun 1 14:56:25 CEST 2011 on sn-devel-104
Andreas Schneider [Wed, 25 May 2011 15:37:51 +0000 (17:37 +0200)]
s3-epmapper: Register ports on IPv4 too.
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Wed Jun 1 13:14:53 CEST 2011 on sn-devel-104
Andreas Schneider [Tue, 31 May 2011 09:35:39 +0000 (11:35 +0200)]
s3-rpc_server: Remove unused variable pipes_open.
Andreas Schneider [Tue, 31 May 2011 11:37:11 +0000 (13:37 +0200)]
s3-rpc_server: Remove syntax from pipes_struct.
Andreas Schneider [Tue, 31 May 2011 11:42:52 +0000 (13:42 +0200)]
s3-rpc_server: Fixed debug messages of srv_pipe_hnd.
Andreas Schneider [Tue, 31 May 2011 11:32:22 +0000 (13:32 +0200)]
s3-rpc_server: Fixed debug messages for rpc_handles.
Andreas Schneider [Mon, 30 May 2011 09:27:07 +0000 (11:27 +0200)]
s3-rpc_server: Fix debug messages.
Andreas Schneider [Wed, 25 May 2011 15:26:28 +0000 (17:26 +0200)]
s3-rpc_server: Don't segfault if there are not handles to free.
Andreas Schneider [Wed, 25 May 2011 15:26:01 +0000 (17:26 +0200)]
s3-rpc_server: Remove guessing of the syntax id.
This is only a wild guess. We don't know to which rpc service the client
wants to talk until we read the the rpc bind packet.
Andreas Schneider [Mon, 30 May 2011 09:11:48 +0000 (11:11 +0200)]
s3-rpc_server: Use the correct syntax id for debugging.
Andreas Schneider [Tue, 31 May 2011 08:53:55 +0000 (10:53 +0200)]
s3-rpc_server: Migrate init_pipe_handles() to new syntax.
Andreas Schneider [Mon, 30 May 2011 09:02:47 +0000 (11:02 +0200)]
s3-rpc_server: Use the context syntax id in api_pipe_request().
Andreas Schneider [Wed, 25 May 2011 14:58:18 +0000 (16:58 +0200)]
s3-rpc_server: Use the correct syntax id in api_pipe_bind_req().
Andreas Schneider [Tue, 31 May 2011 11:33:05 +0000 (13:33 +0200)]
s3-rpc_server: Use the correct context syntax.
Andreas Schneider [Tue, 31 May 2011 08:28:39 +0000 (10:28 +0200)]
s3-rpc_server: Move the context functions to own file.
Andreas Schneider [Wed, 25 May 2011 14:03:43 +0000 (16:03 +0200)]
s3-rpc_server: Store the ndr syntax id in the pipe context.
The client tell us in the rpc bind to which rpc service it wants to
connect. We did set the p->syntax earlier by guessing to which pipe name
it connects, but we don't know to which rpc service it wants to bind
until we read the first packet.
Andreas Schneider [Mon, 30 May 2011 08:40:37 +0000 (10:40 +0200)]
s3-rpc_server: Added syntax id to pipe_rpc_fns struct.
Rusty Russell [Wed, 1 Jun 2011 02:50:11 +0000 (12:20 +0930)]
lib/tevent/tevent.h: minor documentation fix.
The usecs arguments are (of course) microseconds, not milliseconds.
This was added by Andreas Schneider in
6c1bcdc2 (tevent: Document the
tevent helper functions.).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Jun 1 11:47:38 CEST 2011 on sn-devel-104
Rusty Russell [Wed, 1 Jun 2011 02:50:08 +0000 (12:20 +0930)]
libcli/cldap/cldap.c: don't hand huge values to tevent_timeval_add usecs
state->request.delay is two million here, resulting in an invalid timeval.
Since tevent doesn't have a convenient wrapper to add arbitrary usecs,
do the arithmetic here (it's the sole caller of this function).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>