use Cwd qw(abs_path);
use FindBin qw($RealBin);
use POSIX;
+use target::Samba;
sub new($$) {
- my ($classname, $bindir, $binary_mapping, $bindir_path, $srcdir, $exeext) = @_;
+ my ($classname, $bindir, $binary_mapping, $srcdir, $exeext, $server_maxtime) = @_;
$exeext = "" unless defined($exeext);
my $self = { vars => {},
bindir => $bindir,
binary_mapping => $binary_mapping,
- bindir_path => $bindir_path,
srcdir => $srcdir,
- exeext => $exeext
+ exeext => $exeext,
+ server_maxtime => $server_maxtime
};
bless $self;
return $self;
return $self->setup_s3dc("$path/s3dc");
} elsif ($envname eq "secshare") {
return $self->setup_secshare("$path/secshare");
+ } elsif ($envname eq "maptoguest") {
+ return $self->setup_maptoguest("$path/maptoguest");
} elsif ($envname eq "ktest") {
return $self->setup_ktest("$path/ktest");
} elsif ($envname eq "secserver") {
$vars or return undef;
$self->check_or_start($vars,
- ($ENV{SMBD_MAXTIME} or 2700),
"yes", "yes", "yes");
if (not $self->wait_for_start($vars)) {
$ret or return undef;
- my $net = $self->{bindir_path}->($self, "net");
+ my $net = Samba::bindir_path($self, "net");
my $cmd = "";
$cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
$cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
$cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
- system($cmd) == 0 or die("Join failed\n$cmd");
+ if (system($cmd) != 0) {
+ warn("Join failed\n$cmd");
+ return undef;
+ }
- $self->check_or_start($ret,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "yes", "yes");
+ $self->check_or_start($ret, "yes", "yes", "yes");
if (not $self->wait_for_start($ret)) {
return undef;
return $ret;
}
+sub setup_admember($$$$)
+{
+ my ($self, $prefix, $dcvars, $iface) = @_;
+
+ print "PROVISIONING S3 AD MEMBER$iface...";
+
+ my $member_options = "
+ security = ads
+ server signing = on
+ workgroup = $dcvars->{DOMAIN}
+ realm = $dcvars->{REALM}
+";
+
+ my $ret = $self->provision($prefix,
+ "LOCALADMEMBER$iface",
+ $iface,
+ "loCalMember${iface}Pass",
+ $member_options);
+
+ $ret or return undef;
+
+ close(USERMAP);
+ $ret->{DOMAIN} = $dcvars->{DOMAIN};
+ $ret->{REALM} = $dcvars->{REALM};
+
+ my $ctx;
+ my $prefix_abs = abs_path($prefix);
+ $ctx = {};
+ $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
+ $ctx->{domain} = $dcvars->{DOMAIN};
+ $ctx->{realm} = $dcvars->{REALM};
+ $ctx->{dnsname} = lc($dcvars->{REALM});
+ $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
+ Samba::mk_krb5_conf($ctx);
+
+ $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
+
+ my $net = Samba::bindir_path($self, "net");
+ my $cmd = "";
+ $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
+ $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
+ $cmd .= "$net join $ret->{CONFIGURATION}";
+ $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
+
+ if (system($cmd) != 0) {
+ warn("Join failed\n$cmd");
+ return undef;
+ }
+
+ # We need world access to this share, as otherwise the domain
+ # administrator from the AD domain provided by Samba4 can't
+ # access the share for tests.
+ chmod 0777, "$prefix/share";
+
+ $self->check_or_start($ret,
+ "yes", "yes", "yes");
+
+ $self->wait_for_start($ret);
+
+ $ret->{DC_SERVER} = $dcvars->{SERVER};
+ $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
+ $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
+ $ret->{DC_USERNAME} = $dcvars->{USERNAME};
+ $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
+
+ # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
+ $ret->{target} = $self;
+
+ return $ret;
+}
+
+sub setup_plugin_s4_dc($$$$)
+{
+ my ($self, $prefix, $dcvars, $iface) = @_;
+
+ print "PROVISIONING S4 PLUGIN AD DC$iface...";
+
+ my $plugin_s4_dc_options = "
+ workgroup = $dcvars->{DOMAIN}
+ realm = $dcvars->{REALM}
+ security=ads
+ passdb backend = samba4
+ auth methods = guest samba4
+ domain logons = yes
+ rpc_server:epmapper = external
+ rpc_daemon:epmd = disabled
+ rpc_daemon:lsasd = disabled
+ rpc_server:tcpip = no
+ rpc_server:lsass = external
+ rpc_server:lsarpc = external
+ rpc_server:netlogon = external
+ rpc_server:samr = external
+ server signing = on
+";
+
+ my $ret = $self->provision($prefix,
+ "plugindc",
+ $iface,
+ "pluGin${iface}Pass",
+ $plugin_s4_dc_options, 1);
+
+ $ret or return undef;
+
+ close(USERMAP);
+ $ret->{DOMAIN} = $dcvars->{DOMAIN};
+ $ret->{REALM} = $dcvars->{REALM};
+ $ret->{KRB5_CONFIG} = $dcvars->{KRB5_CONFIG};
+
+ # We need world access to this share, as otherwise the domain
+ # administrator from the AD domain provided by Samba4 can't
+ # access the share for tests.
+ chmod 0777, "$prefix/share";
+
+ $self->check_or_start($ret,
+ "no", "no", "yes");
+
+ $self->wait_for_start($ret);
+
+ # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
+ $ret->{target} = $self;
+
+ return $ret;
+}
+
sub setup_secshare($$)
{
my ($self, $path) = @_;
$vars or return undef;
- $self->check_or_start($vars,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "no", "yes");
+ $self->check_or_start($vars, "yes", "no", "yes");
if (not $self->wait_for_start($vars)) {
return undef;
$ret or return undef;
- $self->check_or_start($ret,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "no", "yes");
+ $self->check_or_start($ret, "yes", "no", "yes");
if (not $self->wait_for_start($ret)) {
return undef;
sub setup_ktest($$$)
{
- my ($self, $prefix, $s3dcvars) = @_;
+ my ($self, $prefix) = @_;
print "PROVISIONING server with security=ads...";
my $ret = $self->provision($prefix,
"LOCALKTEST6",
- 5,
+ 6,
"localktest6pass",
$ktest_options);
$ret or return undef;
+ my $ctx;
+ my $prefix_abs = abs_path($prefix);
+ $ctx = {};
+ $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
+ $ctx->{domain} = "KTEST";
+ $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
+ $ctx->{dnsname} = lc($ctx->{realm});
+ $ctx->{kdc_ipv4} = "0.0.0.0";
+ Samba::mk_krb5_conf($ctx);
+
+ $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
+
open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
print USERMAP "
$ret->{USERNAME} = KTEST\\Administrator
#Samba4 DC with the same parameters as are being used here. The
#domain SID is S-1-5-21-1071277805-689288055-3486227160
- system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
+ if (defined($ENV{BUILD_TDB2})) {
+ system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb2 $prefix/private/secrets.tdb");
+ } else {
+ system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
+ }
chmod 0600, "$prefix/private/secrets.tdb";
#This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
chmod 0600, "$prefix/krb5_ccache-3";
- $self->check_or_start($ret,
- ($ENV{SMBD_MAXTIME} or 2700),
- "yes", "no", "yes");
+ $self->check_or_start($ret, "yes", "no", "yes");
if (not $self->wait_for_start($ret)) {
return undef;
return $ret;
}
+sub setup_maptoguest($$)
+{
+ my ($self, $path) = @_;
+
+ print "PROVISIONING maptoguest...";
+
+ my $options = "
+map to guest = bad user
+";
+
+ my $vars = $self->provision($path,
+ "maptoguest",
+ 7,
+ "maptoguestpass",
+ $options);
+
+ $vars or return undef;
+
+ $self->check_or_start($vars,
+ "yes", "no", "yes");
+
+ if (not $self->wait_for_start($vars)) {
+ return undef;
+ }
+
+ $self->{vars}->{s3maptoguest} = $vars;
+
+ return $vars;
+}
+
sub stop_sig_term($$) {
my ($self, $pid) = @_;
kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
return $pid;
}
-sub check_or_start($$$$$) {
- my ($self, $env_vars, $maxtime, $nmbd, $winbindd, $smbd) = @_;
+sub check_or_start($$$$) {
+ my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
unlink($env_vars->{NMBD_TEST_LOG});
print "STARTING NMBD...";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
+ $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
print("Skip nmbd received signal $signame");
exit 0;
};
- sleep($maxtime);
+ sleep($self->{server_maxtime});
exit 0;
}
@optargs = split(/ /, $ENV{NMBD_OPTIONS});
}
- $ENV{MAKE_TEST_BINARY} = $self->{bindir_path}->($self, "nmbd");
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
- my @preargs = ($self->{bindir_path}->($self, "timelimit"), $maxtime);
+ my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{NMBD_VALGRIND})) {
@preargs = split(/ /, $ENV{NMBD_VALGRIND});
}
- exec(@preargs, $self->{bindir_path}->($self, "nmbd"), "-F", "--no-process-group", "-S", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
+ exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
}
write_pid($env_vars, "nmbd", $pid);
print "DONE\n";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
+ $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
print("Skip winbindd received signal $signame");
exit 0;
};
- sleep($maxtime);
+ sleep($self->{server_maxtime});
exit 0;
}
@optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
}
- $ENV{MAKE_TEST_BINARY} = $self->{bindir_path}->($self, "winbindd");
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
- my @preargs = ($self->{bindir_path}->($self, "timelimit"), $maxtime);
+ my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{WINBINDD_VALGRIND})) {
@preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
}
- exec(@preargs, $self->{bindir_path}->($self, "winbindd"), "-F", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
+ print "Starting winbindd with config $env_vars->{SERVERCONFFILE})\n";
+
+ exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
}
write_pid($env_vars, "winbindd", $pid);
print "DONE\n";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
+ $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
$ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
print("Skip smbd received signal $signame");
exit 0;
};
- sleep($maxtime);
+ sleep($self->{server_maxtime});
exit 0;
}
- $ENV{MAKE_TEST_BINARY} = $self->{bindir_path}->($self, "smbd");
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
my @optargs = ("-d0");
if (defined($ENV{SMBD_OPTIONS})) {
@optargs = split(/ /, $ENV{SMBD_OPTIONS});
}
- my @preargs = ($self->{bindir_path}->($self, "timelimit"), $maxtime);
+ my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{SMBD_VALGRIND})) {
@preargs = split(/ /,$ENV{SMBD_VALGRIND});
}
- exec(@preargs, $self->{bindir_path}->($self, "smbd"), "-F", "--no-process-group", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
+ exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
}
write_pid($env_vars, "smbd", $pid);
print "DONE\n";
return 0;
}
-sub provision($$$$$$)
+sub provision($$$$$$$)
{
- my ($self, $prefix, $server, $swiface, $password, $extra_options) = @_;
+ my ($self, $prefix, $server, $swiface, $password, $extra_options, $no_delete_prefix) = @_;
##
## setup the various environment variables we need
my $bindir_abs = abs_path($self->{bindir});
my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
+ my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
+
my @dirs = ();
my $shrdir="$prefix_abs/share";
mkdir($prefix_abs, 0777);
print "CREATE TEST ENVIRONMENT IN '$prefix'...";
- system("rm -rf $prefix_abs/*");
+ if (not defined($no_delete_prefix) or not $no_delete_prefix) {
+ system("rm -rf $prefix_abs/*");
+ }
mkdir($_, 0777) foreach(@dirs);
##
chmod 0755, $ro_shrdir;
my $unreadable_file = "$ro_shrdir/unreadable_file";
- open(UNREADABLE_FILE, ">$unreadable_file") or die("Unable to open $unreadable_file");
+ unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
+ warn("Unable to open $unreadable_file");
+ return undef;
+ }
close(UNREADABLE_FILE);
chmod 0600, $unreadable_file;
my $msdfs_target = "$ro_shrdir/msdfs-target";
- open(MSDFS_TARGET, ">$msdfs_target") or die("Unable to open $msdfs_target");
+ unless (open(MSDFS_TARGET, ">$msdfs_target")) {
+ warn("Unable to open $msdfs_target");
+ return undef;
+ }
close(MSDFS_TARGET);
chmod 0666, $msdfs_target;
symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
## create conffile
##
- open(CONF, ">$conffile") or die("Unable to open $conffile");
+ unless (open(CONF, ">$conffile")) {
+ warn("Unable to open $conffile");
+ return undef;
+ }
print CONF "
[global]
netbios name = $server
debug pid = yes
max log size = 0
- name resolve order = bcast
-
state directory = $lockdir
cache directory = $lockdir
queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
lpq cache time = 0
- ncalrpc dir = $lockdir/ncalrpc
- rpc_server:epmapper = embedded
+ ncalrpc dir = $prefix_abs/ncalrpc
+ rpc_server:epmapper = external
+ rpc_server:spoolss = external
+ rpc_server:lsarpc = external
+ rpc_server:samr = external
+ rpc_server:netlogon = external
+ rpc_server:tcpip = yes
+
+ rpc_daemon:epmd = fork
+ rpc_daemon:spoolssd = fork
+ rpc_daemon:lsasd = fork
+
+ resolv:host file = $dns_host_file
+
+ # The samba3.blackbox.smbclient_s3 test uses this to test that
+ # sending messages works, and that the %m sub works.
+ message command = mv %s $shrdir/message.%m
# Begin extra options
$extra_options
print CONF "
[tmp]
path = $shrdir
+ comment = smb username is [%U]
[tmpguest]
path = $shrdir
guest ok = yes
## create a test account
##
- open(PASSWD, ">$nss_wrapper_passwd") or die("Unable to open $nss_wrapper_passwd");
+ unless (open(PASSWD, ">$nss_wrapper_passwd")) {
+ warn("Unable to open $nss_wrapper_passwd");
+ return undef;
+ }
print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
$unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
";
}
close(PASSWD);
- open(GROUP, ">$nss_wrapper_group") or die("Unable to open $nss_wrapper_group");
+ unless (open(GROUP, ">$nss_wrapper_group")) {
+ warn("Unable to open $nss_wrapper_group");
+ return undef;
+ }
print GROUP "nobody:x:$gid_nobody:
nogroup:x:$gid_nogroup:nobody
$unix_name-group:x:$unix_gids[0]:
$ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
- open(PWD, "|".$self->{bindir_path}->($self, "smbpasswd")." -c $conffile -L -s -a $unix_name >/dev/null");
+ my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
+ unless (open(PWD, "|$cmd")) {
+ warn("Unable to set password for test account\n$cmd");
+ return undef;
+ }
print PWD "$password\n$password\n";
- close(PWD) or die("Unable to set password for test account");
-
+ unless (close(PWD)) {
+ warn("Unable to set password for test account\n$cmd");
+ return undef;
+ }
print "DONE\n";
open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
$ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
$ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
+ if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
+ $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
+ }
$ret{LOCAL_PATH} = "$shrdir";
return \%ret;
print "delaying for nbt name registration\n";
sleep(10);
# This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
- system($self->{bindir_path}->($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
- system($self->{bindir_path}->($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
- system($self->{bindir_path}->($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
- system($self->{bindir_path}->($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
- system($self->{bindir_path}->($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
+ system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
# make sure smbd is also up set
print "wait for smbd\n";
my $count = 0;
my $ret;
do {
- $ret = system($self->{bindir_path}->($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
+ $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
if ($ret != 0) {
sleep(2);
}
return 0;
}
# Ensure we have domain users mapped.
- $ret = system($self->{bindir_path}->($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
+ $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
if ($ret != 0) {
return 1;
}
git.samba.org / idra / samba.git / blobdiff