Stefan Metzmacher [Sun, 10 Jul 2011 11:02:11 +0000 (13:02 +0200)]
s3:smb2_tcon: return the correct maximal_access on the share
metze
Stefan Metzmacher [Mon, 11 Jul 2011 14:12:57 +0000 (16:12 +0200)]
s3:smbd: return the real share access mask in the SMBtconX response
metze
Stefan Metzmacher [Sun, 10 Jul 2011 11:59:40 +0000 (13:59 +0200)]
s3:smbd: use smbd_calculate_access_mask() also for fake_files
metze
Stefan Metzmacher [Sun, 10 Jul 2011 11:03:51 +0000 (13:03 +0200)]
s3:smbd: check the share level access mask in smbd_calculate_access_mask()
I think we should reject invalid access early,
before we might create new files.
Also smbd_check_open_rights() is only called if the file existed.
metze
Stefan Metzmacher [Sun, 10 Jul 2011 11:00:25 +0000 (13:00 +0200)]
s3:smbd: make smbd_calculate_access_mask() non-static
metze
Stefan Metzmacher [Mon, 11 Jul 2011 16:09:44 +0000 (18:09 +0200)]
s3:smbd/msdfs: let create_conn_struct() check the share security descriptor
metze
Stefan Metzmacher [Mon, 11 Jul 2011 13:12:40 +0000 (15:12 +0200)]
s3:winbindd_cm: make use of cli->src_ss instead of calling getsockname()
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Mon Jul 11 19:31:14 CEST 2011 on sn-devel-104
Stefan Metzmacher [Mon, 11 Jul 2011 12:58:41 +0000 (14:58 +0200)]
s3:winbindd_cm: make use of cli->dest_ss instead calling getpeername()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 12:38:52 +0000 (14:38 +0200)]
s3:winbindd_cm: make use of cli_state_disconnect()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 12:19:55 +0000 (14:19 +0200)]
s3:winbindd_cm: make use of cli_state_is_connected()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 11:56:10 +0000 (13:56 +0200)]
s3:auth_server: use cli_echo() to check if the server is alive
This works over port 139 and also 445. send_keepalive() would
only work on port 139.
metze
Stefan Metzmacher [Mon, 11 Jul 2011 11:55:18 +0000 (13:55 +0200)]
s3:auth_server: make use of cli_state_is_connected()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 11:19:47 +0000 (13:19 +0200)]
s3:client: simplify readline_callback() to only use cli_echo()
cli_echo() already swallows NBT keepalive messages,
so there's no need to filter them in the 'smbclient' layer.
metze
Stefan Metzmacher [Mon, 11 Jul 2011 12:15:21 +0000 (14:15 +0200)]
s3:libsmbclient: use cli_state_is_connected() in SMBC_check_server()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 12:29:28 +0000 (14:29 +0200)]
s3:libsmbclient: don't log the lowlevel fd in smbc_free_context()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 12:33:54 +0000 (14:33 +0200)]
s3:libsmb: add cli_state_disconnect()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 14:25:18 +0000 (16:25 +0200)]
s3:libsmb: make use of cli_state_is_connected()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 14:37:25 +0000 (16:37 +0200)]
s3:libsmb: remove unused cli_set_port()
metze
Stefan Metzmacher [Mon, 11 Jul 2011 12:26:23 +0000 (14:26 +0200)]
s3:libsmb: also remember the local socket address after connect
metze
Stefan Metzmacher [Mon, 11 Jul 2011 13:14:34 +0000 (15:14 +0200)]
s3:smb2cli_base: add my copyright
metze
Björn Baumbach [Mon, 11 Jul 2011 12:23:30 +0000 (14:23 +0200)]
s3-torture: run_locktest2(): replace check_error() with check_both_error()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Mon, 11 Jul 2011 12:20:14 +0000 (14:20 +0200)]
s3-torture: run_locktest2(): replace cli_lock() with cli_lock32()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Mon, 11 Jul 2011 12:05:14 +0000 (14:05 +0200)]
s3-torture: run_locktest1(): replace cli_lock() with cli_lock32()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Mon, 11 Jul 2011 11:49:18 +0000 (13:49 +0200)]
s3-torture: locktest2: replace cli_lock() with cli_lock32()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Mon, 11 Jul 2011 09:50:59 +0000 (11:50 +0200)]
s3-torture: let wait_lock() use cli_lock32() instead of cli_lock()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Mon, 11 Jul 2011 09:19:21 +0000 (11:19 +0200)]
s3-libsmb: let cli_lock64 return NTSTATUS instead of bool
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Mon Jul 11 12:48:38 CEST 2011 on sn-devel-104
Björn Baumbach [Mon, 11 Jul 2011 09:13:18 +0000 (11:13 +0200)]
s3-libsmb: introduce cli_lock32()
Same like cli_lock() but return NTSTATUS instead of bool
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Andrew Tridgell [Mon, 11 Jul 2011 04:28:19 +0000 (14:28 +1000)]
dbcheck: use get_lDAPDisplayName_by_attid()
this is better than doing a schema search inside the dbcheck code
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Mon Jul 11 07:43:18 CEST 2011 on sn-devel-104
Andrew Tridgell [Mon, 11 Jul 2011 04:27:21 +0000 (14:27 +1000)]
dsdb: added get_lDAPDisplayName_by_attid
this allows conversion from a DRS attribute ID to a LDAP display name
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Mon, 11 Jul 2011 04:05:30 +0000 (14:05 +1000)]
dbcheck: improved error checking in fixup of missing metdata
when fixing missing attributes in replPropertyMetaData, allow user to
confirm changes, and check for exceptions
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Andrew Tridgell [Mon, 11 Jul 2011 03:45:50 +0000 (13:45 +1000)]
s4-provision: use samba.unix2nttime() instead of hard coding NTTIME offsets
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Matthieu Patou [Thu, 7 Jul 2011 22:06:04 +0000 (02:06 +0400)]
s4-drs: do not return links pointed to unexistant objects
When an object is deleted, link pointed to it are marked as inactive.
When the same object is purged we do not remmove the link pointed to it
(we can't know them) so they stay in the database, it turns to be a
problem for Windows 2008.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Thu, 7 Jul 2011 22:04:52 +0000 (02:04 +0400)]
s4-dirsync: do not return linked attribute if the target object is no more
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Wed, 6 Jul 2011 20:32:32 +0000 (00:32 +0400)]
s4-dsdb: allow objectsid to be specified in a modification operation
if we have the provision control, it's used by dbcheck
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Wed, 6 Jul 2011 20:31:21 +0000 (00:31 +0400)]
s4-samba-tool: dbcheck, check and fix broken metadata
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Wed, 6 Jul 2011 20:29:58 +0000 (00:29 +0400)]
s4-python: Add functions to get linkid and systemflags of an attribute
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Wed, 6 Jul 2011 20:27:44 +0000 (00:27 +0400)]
s4-dsdb: if the provision control is specified, update replication metadata even if the data hasn't change
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Tue, 5 Jul 2011 17:56:30 +0000 (21:56 +0400)]
upgradeprovision: reduce the number of attribute that we skip
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Sun, 3 Jul 2011 07:15:05 +0000 (11:15 +0400)]
s4-provision: fix the value of creation timestamp to be a MS timestamp
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Sun, 3 Jul 2011 18:21:29 +0000 (22:21 +0400)]
s4-dsdb: when replacing linked attribute take always the new dn as the old dn might be broken
The usual use case is that you have a not complete linked attribute (ie.
without the SID) if we keep using the old dn, then the SID will never be
added.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Matthieu Patou [Sun, 3 Jul 2011 18:06:34 +0000 (22:06 +0400)]
s4-dsdb: check for single valued attribute in repl_meta_data module
This is needed because we can have more than 1 value in a single valued
attribute as we store also deleted values. So we do the check in repl_meta_data
and then indicate LDB to do the check.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Andrew Tridgell [Mon, 11 Jul 2011 02:23:01 +0000 (12:23 +1000)]
dbcheck: check all objects, including deleted objects
this makes dbcheck search over all objects, deleted or not. This
matters because when another DC replicates from this DC it replicates
the deleted objects as well, so invalid attributes in deleted objects
can cause problems on the new DC (for example, windows can get stuck
or even crash during the replication)
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Andrew Tridgell [Mon, 11 Jul 2011 02:20:27 +0000 (12:20 +1000)]
s4-dsdb: deleted objects are expected to be missing mandatory attributes
the objectclass_attrs validation that an object contains all mandatory
attributes is incorrect for deleted objects, as they get stripped of
some mandatory attributes when deleted (for example, objectCategory
gets stripped)
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Andrew Tridgell [Mon, 11 Jul 2011 02:01:18 +0000 (12:01 +1000)]
s4-dsdb: fixed crash bug in extended_dn_in
when extended_dn_in fails to resolve a GUID extended DN component, the
debug code assumed that it was a search operation, and accessed
ac->req->op.search.base, which is not valid for non-search DN
expansions.
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Andrew Tridgell [Mon, 11 Jul 2011 01:09:00 +0000 (11:09 +1000)]
dbcheck: added confirm_all support for remaining checks
this allows the user to choose all/none for all the remaining database
checks
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Andrew Tridgell [Mon, 11 Jul 2011 00:53:52 +0000 (10:53 +1000)]
dbcheck: use specified DB schema for non-LDAP URLs
when connecting to a local database with -H we can use that databases
schema
Pair-Programmed-With: Amitay Isaacs <amitay@gmail.com>
Stefan Metzmacher [Sun, 10 Jul 2011 14:40:37 +0000 (16:40 +0200)]
socket_wrapper: make sure interfaces are in the valid range on bind()
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Sun Jul 10 18:24:14 CEST 2011 on sn-devel-104
Stefan Metzmacher [Sun, 10 Jul 2011 13:13:45 +0000 (15:13 +0200)]
s4:lib/socket: iface_list_wildcard() should only return "::" if we have ipv6 interfaces
If glibc has IPv6 support, but it's not enabled in the running kernel
we should not try to listen on "::".
metze
Stefan Metzmacher [Sun, 10 Jul 2011 15:09:11 +0000 (17:09 +0200)]
s3:smb2cli_tcon: use tevent_req_oom()
metze
Volker Lendecke [Sun, 10 Jul 2011 07:21:45 +0000 (09:21 +0200)]
s3: Fix Coverity ID 2587,2588: CHECKED_RETURN
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Sun Jul 10 10:36:11 CEST 2011 on sn-devel-104
Stefan Metzmacher [Sat, 9 Jul 2011 08:13:15 +0000 (10:13 +0200)]
s3:smb2cli_base: ask for the next response if there're still pending requests
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Sat Jul 9 13:55:04 CEST 2011 on sn-devel-104
Stefan Metzmacher [Sat, 9 Jul 2011 08:12:11 +0000 (10:12 +0200)]
s3:smb2cli_base: make use of tevent_req_defer_callback()
In order to notify requests of transport layer errors,
we need to defer the triggering of the callbacks,
otherwise we may crash, if one of the callbacks
destroys the cli_state.
metze
Stefan Metzmacher [Fri, 8 Jul 2011 15:57:56 +0000 (17:57 +0200)]
s3:smb2cli_base: fix memory hierachy in smb2cli_req_recv()
We need to use talloc_reference() if there're more than one
response, but we use it in a way that the caller can't
call talloc_free() or talloc_unlink() on it.
metze
Stefan Metzmacher [Sat, 9 Jul 2011 08:42:21 +0000 (10:42 +0200)]
s3:smb2cli_base: call smb2cli_req_unset_pending() before tevent_req_done()
metze
Stefan Metzmacher [Sat, 9 Jul 2011 08:40:30 +0000 (10:40 +0200)]
s3:smb2cli_base: unset the destructor in smb2cli_req_unset_pending()
metze
Stefan Metzmacher [Sat, 9 Jul 2011 07:51:33 +0000 (09:51 +0200)]
s3:smb2cli_base: keep the order of pending requests
metze
Stefan Metzmacher [Fri, 8 Jul 2011 15:59:51 +0000 (17:59 +0200)]
s3:smb2cli_base: rename 'result' => 'req' in smb2cli_req_create()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 14:04:32 +0000 (16:04 +0200)]
tevent: change version to 0.9.13 after adding tevent_req_defer_callback()
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Sat Jul 9 12:16:44 CEST 2011 on sn-devel-104
Stefan Metzmacher [Fri, 8 Jul 2011 13:54:51 +0000 (15:54 +0200)]
tevent: add tevent_req_defer_callback()
metze
Stefan Metzmacher [Sat, 9 Jul 2011 09:01:10 +0000 (11:01 +0200)]
tevent: fix comments for tevent_req_post()
metze
Jeremy Allison [Fri, 8 Jul 2011 17:44:29 +0000 (10:44 -0700)]
Move smbd_smb2_request_check_tcon() smbd_smb2_request_check_session() next to their only user and make them static. Add comments.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Fri Jul 8 21:01:40 CEST 2011 on sn-devel-104
Günther Deschner [Fri, 8 Jul 2011 15:17:17 +0000 (17:17 +0200)]
s3-waf: split out LIBCLI_WINREG_INTERNAL as LIBCLI_WINREG was pulling in rpc server code in undesired places.
Andreas, please check.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Fri Jul 8 18:34:44 CEST 2011 on sn-devel-104
David Disseldorp [Mon, 4 Jul 2011 09:59:36 +0000 (11:59 +0200)]
winreg: Ensure server return status is set on success
Currently cli_winreg.c functions only set the returned server werror
status on failure, if the server request succeeds the value remains
uninitialised.
Signed-off-by: Andreas Schneider <asn@samba.org>
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Fri Jul 8 16:32:39 CEST 2011 on sn-devel-104
David Disseldorp [Wed, 6 Jul 2011 10:19:05 +0000 (12:19 +0200)]
winreg: Use the ntstatus return code for client side errors
cli_winreg.c functions indicate status to the caller in two ways. The
ntstatus return code indicates client side errors, the pwerr argument
carries the server response error code.
Many functions are filling the pwerr argument on client side error, this
change removes these cases.
Signed-off-by: Andreas Schneider <asn@samba.org>
Stefan Metzmacher [Fri, 8 Jul 2011 11:02:51 +0000 (13:02 +0200)]
s3:libsmb: remove unused cli->inbuf and cli->bufsize
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jul 8 15:21:46 CEST 2011 on sn-devel-104
Stefan Metzmacher [Fri, 8 Jul 2011 10:41:20 +0000 (12:41 +0200)]
s3:client: use an inbuf on the stack in readline_callback()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 10:35:36 +0000 (12:35 +0200)]
s3:libsmb: clistr_pull_talloc() doesn't need base_ptr and flags2 with STR_ASCII
interpret_short_filename() always parses OEM_Strings (in DOS charset).
metze
Stefan Metzmacher [Fri, 8 Jul 2011 09:05:31 +0000 (11:05 +0200)]
s3:libsmb: remove unused smb_dos_errstr()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 08:54:53 +0000 (10:54 +0200)]
s3:libsmb/smberr: make global const arrays static
metze
Stefan Metzmacher [Fri, 8 Jul 2011 08:52:22 +0000 (10:52 +0200)]
s3:libsmb: don't use the cli->inbuf to store the last error
We keep the raw error in cli->raw_status now, until we fixed all
caller to get the NTSTATUS from the function calls.
metze
Stefan Metzmacher [Fri, 8 Jul 2011 11:34:38 +0000 (13:34 +0200)]
s3:torture: use cli_is_nt/dos_error() in run_error_map_extract()
Callers should avoid using cli->inbuf directly!
metze
Stefan Metzmacher [Fri, 8 Jul 2011 08:27:41 +0000 (10:27 +0200)]
s3:libsmb: don't call cli_set_error() in cli_echo()
cli_smb_recv() already does it.
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:45:05 +0000 (09:45 +0200)]
s3:libsmb: remove unused enum smb_read_errors infrastructure
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:30:58 +0000 (09:30 +0200)]
s3:client: close the socket if receive_smb_raw() fails
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:29:29 +0000 (09:29 +0200)]
s3:client: use cli_nt_error() in order to avoid cli_errstr()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:16:20 +0000 (09:16 +0200)]
s3:client: avoid cli_errstr() where we already have an NTSTATUS
metze
Stefan Metzmacher [Fri, 8 Jul 2011 00:13:23 +0000 (02:13 +0200)]
s3:clitar: avoid usage of cli_errstr()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 23:55:26 +0000 (01:55 +0200)]
s3:libsmb: remove use of cli_errstr() in SMBC_server_internal()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 10:59:32 +0000 (12:59 +0200)]
s3:auth_server: use cli->is_guestlogin instead of parsing cli->inbuf.
cli->inbuf is not the valid response buffer of the session setup response.
metze
Stefan Metzmacher [Fri, 8 Jul 2011 11:57:33 +0000 (13:57 +0200)]
s3:auth: remove unused variable
metze
Stefan Metzmacher [Fri, 8 Jul 2011 09:24:19 +0000 (11:24 +0200)]
s3:auth_unix: remove unused var
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:08:39 +0000 (09:08 +0200)]
s3:smb2_server: add some comments about change_to_user() and change_to_root_user()
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jul 8 13:45:46 CEST 2011 on sn-devel-104
Andrew Bartlett [Thu, 7 Jul 2011 23:19:43 +0000 (09:19 +1000)]
lib/param: Merge struct loadparm_service into common
This is handled by a common header and a .c file that is included into
both loadparm.c files.
In the process, _lp functions were renamed to lp__ to allow the common
function definition declarations to be used by source3 and source4
(which have different macro definitions).
The only parameter to change type is 'strict_locking' which was a
bool, and is now an int, to accommodate the 'Auto' value from source3.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri Jul 8 12:35:56 CEST 2011 on sn-devel-104
Andrew Bartlett [Thu, 7 Jul 2011 23:18:09 +0000 (09:18 +1000)]
s3-param use common struct parmlist_entry to hold parametric options
This will allow struct loadparm_service to be shared in future.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 12:03:30 +0000 (22:03 +1000)]
param: Move per-share parameters into a seperate file, to share with s3
This will allow the struct loadparm_service to be in common between
the two loadparm implementations in the tree.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 11:38:46 +0000 (21:38 +1000)]
s4-param Remove offset != -1 checks
No offset values are set to -1 in the parameter table
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 11:35:51 +0000 (21:35 +1000)]
s4-param change to struct bitmap to match s3-param
Andrew Bartlett [Thu, 7 Jul 2011 11:30:02 +0000 (21:30 +1000)]
s4-param Also check the p_class matches when comparing offset
Andrew Bartlett [Thu, 7 Jul 2011 11:16:24 +0000 (21:16 +1000)]
s3-param check for aliases with both p_class and offset
This bug was found when comparing with the source4 loadparm code.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 11:04:31 +0000 (21:04 +1000)]
lib/util Move bitmap.c to lib/util
Andrew Bartlett [Thu, 7 Jul 2011 10:33:55 +0000 (20:33 +1000)]
param: Add hooks to s3 parm_struct and the parameters void * pointer
This is to that the pyparam hooks can use the hooks to connect with
the s3 loadparm system. This now also includes per-service
parameters.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 08:18:38 +0000 (18:18 +1000)]
s3-lib use True and False in bitmap.c
Andrew Bartlett [Thu, 7 Jul 2011 04:10:54 +0000 (14:10 +1000)]
s3-param: calculate default_server_announce at runtime
Andrew Bartlett [Thu, 7 Jul 2011 03:45:13 +0000 (13:45 +1000)]
s3-param Remove lp_set_passdb_backend()
Volker Lendecke [Fri, 8 Jul 2011 08:06:58 +0000 (10:06 +0200)]
s3-zfsacl: Fix a debug message
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Fri Jul 8 11:22:55 CEST 2011 on sn-devel-104
Stefan Metzmacher [Thu, 7 Jul 2011 17:48:43 +0000 (19:48 +0200)]
s3:wscript_build: remove unused variable
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jul 8 02:43:22 CEST 2011 on sn-devel-104
Stefan Metzmacher [Thu, 7 Jul 2011 23:03:49 +0000 (01:03 +0200)]
s3:selftest: run SMB2-BASIC
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:torture: add SMB2-BASIC
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_query_directory*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_write*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze