samba.git
17 years agodon't force debug in the RPC-MGMT test
Andrew Tridgell [Tue, 10 Feb 2004 20:48:22 +0000 (20:48 +0000)]
don't force debug in the RPC-MGMT test

17 years agowe can close the netlogon pipe used to setup the schannel session key
Andrew Tridgell [Tue, 10 Feb 2004 20:47:22 +0000 (20:47 +0000)]
we can close the netlogon pipe used to setup the schannel session key
as soon as we are finished with the netlogon negotiation phase. The
session key remains valid.

17 years agoConvert libcli routines to return NTSTATUS instead of BOOL. Again, the
Tim Potter [Tue, 10 Feb 2004 11:33:35 +0000 (11:33 +0000)]
Convert libcli routines to return NTSTATUS instead of BOOL.  Again, the
only users are smbclient and smbtorture.

17 years agodon't always use the same schannel context number
Andrew Tridgell [Tue, 10 Feb 2004 11:19:58 +0000 (11:19 +0000)]
don't always use the same schannel context number

17 years ago- modified the dcerpc client security code to be generic, so ntlmssp
Andrew Tridgell [Tue, 10 Feb 2004 10:22:12 +0000 (10:22 +0000)]
- modified the dcerpc client security code to be generic, so ntlmssp
  and schannel are both instances of possible security modules

- added schannel sign and sign/seal support to the dcerpc client
  code. You select it with binding options of "schannel,sign" or
  "schannel,seal".

17 years agothe subsystem name is 'PASSDB' so name the modules 'passdb_XXX'
Stefan Metzmacher [Mon, 9 Feb 2004 21:57:07 +0000 (21:57 +0000)]
the subsystem name is 'PASSDB' so name the modules 'passdb_XXX'

metze

17 years ago- remove unused 'evel ...' calls, we don't need them inside of
Stefan Metzmacher [Mon, 9 Feb 2004 21:56:03 +0000 (21:56 +0000)]
-   remove unused 'evel ...' calls, we don't need them inside of
    AC_XXX() macros

-   handle --with-shared-modules=process_model --with-static-modules=process_model_single
    right. ( build 'single' static and the rest of the process_model modules shared,
    if they're not declared as NOT.

metze

17 years agofix pdb_ldap build if LDAP support was detected
Stefan Metzmacher [Mon, 9 Feb 2004 21:04:42 +0000 (21:04 +0000)]
fix pdb_ldap build if LDAP support was detected

metze

17 years agoConvert libcli routines to use cli_tree instead of cli_state. Port
Tim Potter [Sun, 8 Feb 2004 00:51:07 +0000 (00:51 +0000)]
Convert libcli routines to use cli_tree instead of cli_state. Port
smbtorture to use the new interface.

Part 2 will be to eliminate cli_state from smbtorture as this is now
the only place where it is used.

17 years agoadd the TORTURE SUBSYSTEM to the config.m4 scheme
Stefan Metzmacher [Thu, 5 Feb 2004 12:16:29 +0000 (12:16 +0000)]
add the TORTURE SUBSYSTEM to the config.m4 scheme

tridge:
I'll convert all stuff first to this scheme
and then move to the scheme with two files per subsystems
so we'll later something like config.m4 and config.mk...

metze

17 years agoremove unused Makefile vars and fix dublication in $(PROTO_OBJ)
Stefan Metzmacher [Thu, 5 Feb 2004 11:37:53 +0000 (11:37 +0000)]
remove unused Makefile vars and fix dublication in $(PROTO_OBJ)

metze

17 years agoThis would appear to restore smbtorture to be able to use the syntax
Andrew Bartlett [Tue, 3 Feb 2004 21:53:51 +0000 (21:53 +0000)]
This would appear to restore smbtorture to be able to use the syntax
documented in it's self-help for RPC tests.

Andrew Bartlett

17 years ago- add 'print' to the DCERPC binding strings
Stefan Metzmacher [Tue, 3 Feb 2004 14:56:07 +0000 (14:56 +0000)]
- add 'print' to the DCERPC binding strings

  e.g.
  ncacn_np:myserver:[samr,sign,print]

  will now enable the packet debugging

  and the debugging is not bound anymore to the debuglevel >= 2
  in the torture tests

- also the dcesrv_remote module now supports debugging of the packets
  use the 'dcerpc_remote:binding' smb.conf parameter.

metze

17 years agoif vfs_cifs want to modify the ntvfs_ops struct, it should
Stefan Metzmacher [Tue, 3 Feb 2004 12:37:54 +0000 (12:37 +0000)]
if vfs_cifs want to modify the ntvfs_ops struct, it should
use a temporary copy of the struct!

metze

17 years agomove include/ntvfs.h to ntvfs/ntvfs.h
Stefan Metzmacher [Tue, 3 Feb 2004 11:18:54 +0000 (11:18 +0000)]
move include/ntvfs.h to ntvfs/ntvfs.h

metze

17 years ago- port AUTH and PASSDB subsystems to new
Stefan Metzmacher [Tue, 3 Feb 2004 11:10:56 +0000 (11:10 +0000)]
- port AUTH and PASSDB subsystems to new
  SMB_SUBSYSTEM() scheme

- some const fixes in ntvfs

metze

17 years agomake more function static, they are still available via the function pointers
Stefan Metzmacher [Tue, 3 Feb 2004 11:05:36 +0000 (11:05 +0000)]
make more function static, they are still available via the function pointers

metze

18 years agodo some merging from 3.0
Stefan Metzmacher [Tue, 3 Feb 2004 06:37:28 +0000 (06:37 +0000)]
do some merging from 3.0

metze

18 years ago- move all SMB server stuff to smb_server/*
Stefan Metzmacher [Tue, 3 Feb 2004 05:47:36 +0000 (05:47 +0000)]
- move all SMB server stuff to smb_server/*
  and create the SMB server subsystem

- remove unused XML and MYSQL configure tests

metze

18 years agoremove some unused stuff
Stefan Metzmacher [Mon, 2 Feb 2004 14:48:40 +0000 (14:48 +0000)]
remove some unused stuff

metze

18 years agoconst fixes
Stefan Metzmacher [Mon, 2 Feb 2004 14:46:25 +0000 (14:46 +0000)]
const fixes

metze

18 years agoreadd this fix:
Stefan Metzmacher [Mon, 2 Feb 2004 14:13:48 +0000 (14:13 +0000)]
readd this fix:

fix PROTO_OBJS ... fix make proto on some platforms

metze

18 years ago- we now specify the object files in the subsystems config.m4 file
Stefan Metzmacher [Mon, 2 Feb 2004 13:43:03 +0000 (13:43 +0000)]
- we now specify the object files in the subsystems config.m4 file
  I plan to convert all objectfile group to use SMB_SUBSYSTEM
  later I'll add a SMB_BINARY() and SMB_LIBRARY(), then there will be no more need
  to touch Makefile.in, because all make rules will be autogenerated by configure

- convert the PROCESS_MODEL subsystem to this new scheme
  and move the pthread test to smbd/process_model.m4

- convert the CHARSET subsystem to this new scheme
  and move the iconv test to lib/iconv.m4

18 years agosome DEBUG and comment fixes
Stefan Metzmacher [Mon, 2 Feb 2004 13:28:29 +0000 (13:28 +0000)]
some DEBUG and comment fixes

metze

18 years agosome compilers don't like the #warning preprocessing directive
Stefan Metzmacher [Mon, 2 Feb 2004 12:15:25 +0000 (12:15 +0000)]
some compilers don't like the #warning preprocessing directive
so just do a DEBUG(0,("..."));

metze

18 years agoremove unused files
Stefan Metzmacher [Mon, 2 Feb 2004 07:23:29 +0000 (07:23 +0000)]
remove unused files

we maybe need the util_smbd.c code later but this should not be in the lib/ dir

metze

18 years agoremove unused .cvsignore file
Stefan Metzmacher [Mon, 2 Feb 2004 07:11:30 +0000 (07:11 +0000)]
remove unused .cvsignore file

18 years agosome systems doesn't have ./ in PATH
Stefan Metzmacher [Mon, 2 Feb 2004 07:06:28 +0000 (07:06 +0000)]
some systems doesn't have ./ in PATH
so use ./build/pidl/pidl.pl

metze

18 years agofix PROTO_OBJS ... fix make proto on some platforms
Stefan Metzmacher [Mon, 2 Feb 2004 07:02:15 +0000 (07:02 +0000)]
fix PROTO_OBJS ... fix make proto on some platforms

metze

18 years agoMakefile.in cleanups:
Stefan Metzmacher [Sun, 1 Feb 2004 12:16:26 +0000 (12:16 +0000)]
Makefile.in cleanups:
lib/util_smbd.c is not used anymore

reorder the SMB_MODULE() parameters the goal is to autogenerate the
make rules for shared modules:

dnl SMB_MODULE(1:name,2:subsystem,3:default_build,
4:object_files,5:shared_object,6:libs
7:whatif-static,8:whatif-shared,9:whatif-not)

and generate <SUBSYSTEM>_LIBS and MODULE_<name>_LIBS with the SMB_MODULE() macro

metze

18 years agomerge:
Stefan Metzmacher [Sun, 1 Feb 2004 11:26:25 +0000 (11:26 +0000)]
merge:
ldap and krb5 configure tests
libads/*.c and libcli/raw/clikrb5.c from 3.0

metze

18 years agoremove unused configure checks and options
Stefan Metzmacher [Thu, 29 Jan 2004 16:08:19 +0000 (16:08 +0000)]
remove unused configure checks and options
 --with-acl-support
 --with-sendfile-support
 --with-manpages-langs
 --with-utmp
 --with-quotas
 --with-nisplus-home
 --with-profiling-data
 --with-syslog
 --with-pam_smbpass
 --with-pam
 --with-smbmount
 --with-automount
 --with-dce-dfs
 --with-afs
 --with-smbwrapper
poll and poll.h

I'm sure we need some of this but e.g. acl, sendfile and quotas belong
only to the posix ntvfs module, so the tests will to into a seperate config.m4
file, when we need them...

metze

18 years agoadd find_unused_options.sh
Stefan Metzmacher [Thu, 29 Jan 2004 09:54:42 +0000 (09:54 +0000)]
add find_unused_options.sh

this script finds unused lp_*() functions

use it like this:
   user@host:~/samba/source>./script/find_unused_options.sh

metze

18 years agoremove a lot of unused smb.conf options
Stefan Metzmacher [Thu, 29 Jan 2004 09:47:39 +0000 (09:47 +0000)]
remove a lot of unused smb.conf options

I think we should remove a view more,
but step by step:-)

metze

18 years agoremove a lot of unused stuff from the header files
Stefan Metzmacher [Wed, 28 Jan 2004 18:54:36 +0000 (18:54 +0000)]
remove a lot of unused stuff from the header files

and exclude some files from Makefile.in

metze

18 years ago- cosmetic fix in configure.in
Stefan Metzmacher [Wed, 28 Jan 2004 15:47:20 +0000 (15:47 +0000)]
- cosmetic fix in configure.in

- fix mem leak in process.c

metze

18 years ago- remove all STFS related stuff
Stefan Metzmacher [Wed, 28 Jan 2004 15:43:18 +0000 (15:43 +0000)]
- remove all STFS related stuff
  (which were already removed in revision 1.37 and
   readded by mistake in revision 1.39)

- change the SMB_MODULE() macro a bit
  Now we have:

dnl Specify the default build method of this module
dnl SMB_MODULE_DEFAULT(name,default_build)
AC_DEFUN(SMB_MODULE_DEFAULT,...

dnl Mark specified module as shared
dnl SMB_MODULE(name,default_build,static_files,shared_files,subsystem,whatif-static,whatif-shared,whatif-not)

  this let us specify the default build method inside of the included config.m4
  files

metze

18 years agoremove autogenerated version.h from CVS
Stefan Metzmacher [Wed, 28 Jan 2004 12:49:32 +0000 (12:49 +0000)]
remove autogenerated version.h from CVS

metze

18 years agomerge the version.h autogeneration stuff from 3.0
Stefan Metzmacher [Wed, 28 Jan 2004 12:47:52 +0000 (12:47 +0000)]
merge the version.h autogeneration stuff from 3.0

metze

18 years agoRemove testing utility for removed SAM system
Jelmer Vernooij [Sat, 24 Jan 2004 19:21:08 +0000 (19:21 +0000)]
Remove testing utility for removed SAM system

18 years ago(merge from 3.0)
Andrew Bartlett [Thu, 22 Jan 2004 10:22:03 +0000 (10:22 +0000)]
(merge from 3.0)

Fix for debian Bug#225328 by LaMont Jones <lamont@debian.org>, where
the failure of our LFS test on ia64 caused the _GNU_SOURCE define not to be
added, causeing strndup() not to be defined...

This was due to strdup() bein implicitly declared, and casting
pointer->int->pointer.

I'll into when we really should define _GNU_SOURCE shortly, but the
fix is correct anyway.

Andrew Bartlett

18 years ago- move the vars used by the backtrace stuff into the #ifdef
Stefan Metzmacher [Thu, 22 Jan 2004 02:28:17 +0000 (02:28 +0000)]
- move the vars used by the backtrace stuff into the #ifdef

- handle SIBABRT with a backtrace

metze

18 years agofix last commit, which went in by mistake
Stefan Metzmacher [Thu, 22 Jan 2004 02:13:13 +0000 (02:13 +0000)]
fix last commit, which went in by mistake
('cvs ci filename' should be my friend:-)

get rid of some more global unconst vars.
I didn't find a referenz of this vars:
SIG_ATOMIC_T reload_after_sighup = 0;
SIG_ATOMIC_T got_sig_term = 0;

tridge: is it ok to remove them?
it compiles for me

metze

18 years agosorry, the last commit went in by mistake:-(
Stefan Metzmacher [Thu, 22 Jan 2004 02:02:27 +0000 (02:02 +0000)]
sorry, the last commit went in by mistake:-(

- implement the interface_by_name() and interface_by_uuid() hooks
  for the autogenerated dcerpc server boilerplates.

metze

18 years agoinitilize ev->maxfd = EVENT_INVALID_MAXFD; before the while() loop.
Stefan Metzmacher [Thu, 22 Jan 2004 01:56:31 +0000 (01:56 +0000)]
initilize ev->maxfd = EVENT_INVALID_MAXFD; before the while() loop.

metze

18 years ago- make the recalculation of ev->maxfd a bit more efficient.
Stefan Metzmacher [Thu, 22 Jan 2004 01:35:51 +0000 (01:35 +0000)]
- make the recalculation of ev->maxfd a bit more efficient.
- fix the case when we have no fd_events left on the event_context
  we now exit after doing the timed events and not block in select()
  waiting for no fd's to become ready...

metze

18 years agomake dcerpc_pipes[] completely const.
Stefan Metzmacher [Thu, 22 Jan 2004 01:29:44 +0000 (01:29 +0000)]
make dcerpc_pipes[] completely const.
so it now apears in the text section of
'size librpc/gen_ndr/tables.o'

metze

18 years agoadded a little bit of const magic to get rid of the data in librpc/gen_ndr/*.o
Andrew Tridgell [Thu, 22 Jan 2004 01:12:43 +0000 (01:12 +0000)]
added a little bit of const magic to get rid of the data in librpc/gen_ndr/*.o

18 years agolet the event_add_XXX() function return a pointer of the allocated event structure
Stefan Metzmacher [Wed, 21 Jan 2004 23:19:59 +0000 (23:19 +0000)]
let the event_add_XXX() function return a pointer of the allocated event structure
and NULL on allacation error.

metze

18 years agocope with a wider range of broken servers in the RAW-QFILEINFO test
Andrew Tridgell [Wed, 21 Jan 2004 03:30:03 +0000 (03:30 +0000)]
cope with a wider range of broken servers in the RAW-QFILEINFO test

18 years agocheck for the correct fault code when the server fails a use of a
Andrew Tridgell [Tue, 20 Jan 2004 06:10:15 +0000 (06:10 +0000)]
check for the correct fault code when the server fails a use of a
incorrect policy handle

18 years agoadded code to the RPC-SPOOLSS test that demonstrates that policy
Andrew Tridgell [Tue, 20 Jan 2004 06:07:09 +0000 (06:07 +0000)]
added code to the RPC-SPOOLSS test that demonstrates that policy
handles are not shared between open dcerpc connections, even when
those connections are on the same SMB socket. I have tested this with
w2k3, w2k and NT4. It seems that policy handles have a strict scope of
the dcerpc connection on which they were opened.

I realise that this goes against existing folk-law in the team, but it
seems that the previous testing (I'm not sure who did this?) was
wrong. Perhaps clients do send us policy handles from other
connections, but if they do then the correct thing to do is to fail
the operation with a dcerpc fault. I suspect that failing it with
exactly the right dcerpc fault code is important.

18 years agodcerpc server output now copes with the client blocking part way
Andrew Tridgell [Tue, 20 Jan 2004 05:54:17 +0000 (05:54 +0000)]
dcerpc server output now copes with the client blocking part way
through a read. This happens to also avoid a memcpy on output for
dcerpc over tcp.

18 years agoavoid a copy of the data being input to the dcerpc server in the most
Andrew Tridgell [Tue, 20 Jan 2004 04:32:17 +0000 (04:32 +0000)]
avoid a copy of the data being input to the dcerpc server in the most
common case of there being no pending partial data and a full dcerpc
packet being received.

We should use this same model for the smb server. It gives us
efficient memory usage while allowing for completely async socket
operations.

18 years agoadd make [un]installtorture
Stefan Metzmacher [Mon, 19 Jan 2004 14:57:56 +0000 (14:57 +0000)]
add make [un]installtorture
and let this be called by make [un]install

we can later change this and the make all
to not do the torture stuff, but for know only developers will
use samba4...

metze

18 years agoremove all unused stuff from Makefile.in
Stefan Metzmacher [Mon, 19 Jan 2004 14:22:32 +0000 (14:22 +0000)]
remove all unused stuff from Makefile.in
and some stuff from configure.in and dynconfig.[ch]

make all

makes
bin/gentest   bin/masktest   bin/smbd
bin/locktest  bin/smbclient  bin/smbtorture
bin/ndrdump

now

metze

18 years agoAdd test to set single fields in fields_present with info21.
Simo Sorce [Mon, 19 Jan 2004 08:59:14 +0000 (08:59 +0000)]
Add test to set single fields in fields_present with info21.

18 years agomake sure we initialise r.out.handle in openeventlog
Andrew Tridgell [Sat, 17 Jan 2004 00:16:18 +0000 (00:16 +0000)]
make sure we initialise r.out.handle in openeventlog

18 years ago* fixed a segv when -U is not used in smbtorture.
Andrew Tridgell [Thu, 15 Jan 2004 23:19:07 +0000 (23:19 +0000)]
* fixed a segv when -U is not used in smbtorture.

* fixed the handling of anonymous logins

18 years agoa script which find unused or undefined vars in Makefile or Makefile.in
Stefan Metzmacher [Tue, 13 Jan 2004 22:24:56 +0000 (22:24 +0000)]
a script which find unused or undefined vars in Makefile or Makefile.in

call it like:

script/find_unused_makefilevars.pl Makefile

or

script/find_unused_makefilevars.pl Makefile.in

metze

18 years agoAdd script for finding unused function checks in configure.in
Jelmer Vernooij [Tue, 13 Jan 2004 22:22:43 +0000 (22:22 +0000)]
Add script for finding unused function checks in configure.in

18 years agoFix --with-fhs for swatdir
Jelmer Vernooij [Sun, 11 Jan 2004 13:40:06 +0000 (13:40 +0000)]
Fix --with-fhs for swatdir

18 years agoadded dom_sid_string() function
Andrew Tridgell [Sun, 11 Jan 2004 05:16:07 +0000 (05:16 +0000)]
added dom_sid_string() function

18 years agoUpdate Copyright to 1992-2004
Stefan Metzmacher [Fri, 9 Jan 2004 06:59:48 +0000 (06:59 +0000)]
Update Copyright to 1992-2004

Jerry should I change this in 3_0 and HEAD as well?

metze

18 years agofixed the rpc epmapper server. This fixes rpc over tcp.
Andrew Tridgell [Fri, 9 Jan 2004 02:43:23 +0000 (02:43 +0000)]
fixed the rpc epmapper server. This fixes rpc over tcp.

18 years agoThis patch adds a better dcerpc server infastructure.
Stefan Metzmacher [Thu, 8 Jan 2004 22:55:27 +0000 (22:55 +0000)]
This patch adds a better dcerpc server infastructure.

1.) We now register endpoint servers add startup via register_backend()
    and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context

2.) each endpoint server can register at context creation time as much interfaces as it wants
    (multiple interfaces on one endpoint are supported!)
    (NOTE:  there's a difference between 'endpoint server' and 'endpoint'!
    for details look at rpc_server/dcesrv_server.h)

3.) one endpoint can have a security descriptor registered to it self
    this will be checked in the future when a client wants to connect
    to an smb pipe endpoint.

4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
    it takes this options in the [globals] section:

    dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
    dcerpc remote:binding = ...
    dcerpc remote:user = ...
    dcerpc remote:password = ...

5.) we currently have tree endpoint servers: epmapper, rpcecho and remote

    the default for the 'dcerpc endpiont servers = epmapper, rpcecho'

    for testing you can also do
    dcerpc endpoint servers = rpcecho, remote, epmapper
    dcerpc remote:interfaces = srvsvc, samr, netlogon

6,) please notice the the epmapper now only returns NO_ENTRIES
    (but I think we'll find a solution for this too:-)

7.) also there're some other stuff left, but step by step :-)

This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration

metze

(hmmm, my first large commit...I hope it works as supposed :-)

18 years agoremove a useless assignment
Stefan Metzmacher [Thu, 8 Jan 2004 06:48:54 +0000 (06:48 +0000)]
remove a useless assignment

metze

18 years agoAdd note about new configure structure.
Jelmer Vernooij [Fri, 2 Jan 2004 13:47:13 +0000 (13:47 +0000)]
Add note about new configure structure.

18 years agoAutodetect service_type in cli_tree_full_connection() if the caller
Tim Potter [Fri, 2 Jan 2004 01:04:59 +0000 (01:04 +0000)]
Autodetect service_type in cli_tree_full_connection() if the caller
passes in NULL.

18 years agothe endpoint mapper now works in bigendian mode
Andrew Tridgell [Wed, 31 Dec 2003 01:32:33 +0000 (01:32 +0000)]
the endpoint mapper now works in bigendian mode

18 years ago"subsystems" should be static
Andrew Tridgell [Tue, 30 Dec 2003 22:55:12 +0000 (22:55 +0000)]
"subsystems" should be static

18 years agoremove some unused files
Andrew Tridgell [Mon, 22 Dec 2003 02:52:33 +0000 (02:52 +0000)]
remove some unused files

18 years agominor updates to make the srvsvc test compile
Andrew Tridgell [Sun, 21 Dec 2003 07:57:49 +0000 (07:57 +0000)]
minor updates to make the srvsvc test compile

18 years agowkssvc test updates from metze
Andrew Tridgell [Sun, 21 Dec 2003 07:53:57 +0000 (07:53 +0000)]
wkssvc test updates from metze

18 years agolatest srvsvc and wkssvc IDL from metze
Andrew Tridgell [Sat, 20 Dec 2003 21:50:51 +0000 (21:50 +0000)]
latest srvsvc and wkssvc IDL from metze

18 years agotim, I'm guessing you really didn't want to add this :)
Andrew Tridgell [Sat, 20 Dec 2003 21:09:04 +0000 (21:09 +0000)]
tim, I'm guessing you really didn't want to add this :)

18 years agoRemove Makefile targets for old python extensions.
Tim Potter [Sat, 20 Dec 2003 09:23:48 +0000 (09:23 +0000)]
Remove Makefile targets for old python extensions.

18 years agoaddition of samr_SetSecurity() from kai
Andrew Tridgell [Fri, 19 Dec 2003 23:44:26 +0000 (23:44 +0000)]
addition of samr_SetSecurity() from kai

we needed to adjust the alignment of [relative] buffers for this to
work. I wonder if they are always 4 byte aligned?

18 years agofixed removal of moe than one ncacn_* option from option list
Andrew Tridgell [Fri, 19 Dec 2003 04:26:26 +0000 (04:26 +0000)]
fixed removal of moe than one ncacn_* option from option list

18 years agofixed the AddAliasMem test code
Andrew Tridgell [Fri, 19 Dec 2003 04:13:39 +0000 (04:13 +0000)]
fixed the AddAliasMem test code

18 years agoadded a bunch of alias functions in samr.idl based on work by Kai.
Andrew Tridgell [Fri, 19 Dec 2003 03:59:27 +0000 (03:59 +0000)]
added a bunch of alias functions in samr.idl based on work by Kai.

18 years agoadded code to the IDL validator to check for common errors with
Andrew Tridgell [Fri, 19 Dec 2003 00:40:40 +0000 (00:40 +0000)]
added code to the IDL validator to check for common errors with
pointers are arrays

18 years agofixed a segv in RPC-* when debug level > 2
Andrew Tridgell [Wed, 17 Dec 2003 21:37:34 +0000 (21:37 +0000)]
fixed a segv in RPC-* when debug level > 2
thanks to Kai for spotting this!

18 years agoFix typo.
Tim Potter [Wed, 17 Dec 2003 03:38:06 +0000 (03:38 +0000)]
Fix typo.

18 years agofixed a bug in the acct_flags checking on CreateUser2 in the RPC-SAMR test
Andrew Tridgell [Wed, 17 Dec 2003 02:35:04 +0000 (02:35 +0000)]
fixed a bug in the acct_flags checking on CreateUser2 in the RPC-SAMR test

18 years agoDelete old python bindings.
Tim Potter [Wed, 17 Dec 2003 02:18:36 +0000 (02:18 +0000)]
Delete old python bindings.

18 years agoadded a smb.conf flag "rpc big endian" that tells our rpc server to
Andrew Tridgell [Wed, 17 Dec 2003 02:06:44 +0000 (02:06 +0000)]
added a smb.conf flag "rpc big endian" that tells our rpc server to
send packets in bigendian format.

18 years agoremoved some unused functions
Andrew Tridgell [Tue, 16 Dec 2003 12:59:20 +0000 (12:59 +0000)]
removed some unused functions

18 years agofixed formatting of uuids in debug output
Andrew Tridgell [Tue, 16 Dec 2003 12:11:00 +0000 (12:11 +0000)]
fixed formatting of uuids in debug output

18 years agoadded a define for the DCERPC little-endian data representation flag
Andrew Tridgell [Tue, 16 Dec 2003 11:24:28 +0000 (11:24 +0000)]
added a define for the DCERPC little-endian data representation flag

18 years agofixed the RPC-MGMT and RPC-SCANNER tests to work with the new
Andrew Tridgell [Tue, 16 Dec 2003 10:57:17 +0000 (10:57 +0000)]
fixed the RPC-MGMT and RPC-SCANNER tests to work with the new
dcerpc_binding_string code

18 years agono longer require the pipe name or tcp port number to be the first
Andrew Tridgell [Tue, 16 Dec 2003 10:15:21 +0000 (10:15 +0000)]
no longer require the pipe name or tcp port number to be the first
option in the ncacn_* syntax

18 years agouse bigendian mode to fix the idl for samr_LogonHours
Andrew Tridgell [Tue, 16 Dec 2003 10:09:02 +0000 (10:09 +0000)]
use bigendian mode to fix the idl for samr_LogonHours

18 years agomuch better docs on the smbtorture ncacn syntax, including how to
Andrew Tridgell [Tue, 16 Dec 2003 09:55:09 +0000 (09:55 +0000)]
much better docs on the smbtorture ncacn syntax, including how to
choose bigendian smbtorture on the command line

18 years agoit turns out that a wire policy handle isn't a blob either, its a
Andrew Tridgell [Tue, 16 Dec 2003 09:50:49 +0000 (09:50 +0000)]
it turns out that a wire policy handle isn't a blob either, its a
uint32 followed by a GUID. I needed to fix this to support running in
mixed-mode rpc (where smbtorture is bigendian and w2k3 is
little-endian). Otherwise when you send back a policy handle the
server doesn't recognise it.

18 years agoadded support for big-endian ucs2 strings (as used by big-endian
Andrew Tridgell [Tue, 16 Dec 2003 09:20:34 +0000 (09:20 +0000)]
added support for big-endian ucs2 strings (as used by big-endian
msrpc).

this was easier than I expected!

18 years agoa fairly large commit!
Andrew Tridgell [Tue, 16 Dec 2003 09:02:58 +0000 (09:02 +0000)]
a fairly large commit!

This adds support for bigendian rpc in the client. I have installed
SUN pcnetlink locally and am using it to test the samba4 rpc
code. This allows us to easily find places where we have stuffed up
the types (such as 2 uint16 versus a uint32), as testing both
big-endian and little-endian easily shows which is correct. I have now
used this to fix several bugs like that in the samba4 IDL.

In order to make this work I also had to redefine a GUID as a true
structure, not a blob. From the pcnetlink wire it is clear that it is
indeed defined as a structure (the byte order changes). This required
changing lots of Samba code to use a GUID as a structure.

I also had to fix the if_version code in dcerpc syntax IDs, as it
turns out they are a single uint32 not two uint16s.

The big-endian support is a bit ugly at the moment, and breaks the
layering in some places. More work is needed, especially on the server
side.

18 years agothe out substructure is not empty if there is a return from the
Andrew Tridgell [Tue, 16 Dec 2003 04:15:51 +0000 (04:15 +0000)]
the out substructure is not empty if there is a return from the
function

18 years agoenable rep_inet_ntoa() for non-pthread builds
Andrew Tridgell [Tue, 16 Dec 2003 04:10:47 +0000 (04:10 +0000)]
enable rep_inet_ntoa() for non-pthread builds

18 years agomore mutex portability.
Andrew Tridgell [Tue, 16 Dec 2003 03:45:04 +0000 (03:45 +0000)]
more mutex portability.