Stefan Metzmacher [Fri, 8 Jul 2011 07:30:58 +0000 (09:30 +0200)]
s3:client: close the socket if receive_smb_raw() fails
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:29:29 +0000 (09:29 +0200)]
s3:client: use cli_nt_error() in order to avoid cli_errstr()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:16:20 +0000 (09:16 +0200)]
s3:client: avoid cli_errstr() where we already have an NTSTATUS
metze
Stefan Metzmacher [Fri, 8 Jul 2011 00:13:23 +0000 (02:13 +0200)]
s3:clitar: avoid usage of cli_errstr()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 23:55:26 +0000 (01:55 +0200)]
s3:libsmb: remove use of cli_errstr() in SMBC_server_internal()
metze
Stefan Metzmacher [Fri, 8 Jul 2011 10:59:32 +0000 (12:59 +0200)]
s3:auth_server: use cli->is_guestlogin instead of parsing cli->inbuf.
cli->inbuf is not the valid response buffer of the session setup response.
metze
Stefan Metzmacher [Fri, 8 Jul 2011 11:57:33 +0000 (13:57 +0200)]
s3:auth: remove unused variable
metze
Stefan Metzmacher [Fri, 8 Jul 2011 09:24:19 +0000 (11:24 +0200)]
s3:auth_unix: remove unused var
metze
Stefan Metzmacher [Fri, 8 Jul 2011 07:08:39 +0000 (09:08 +0200)]
s3:smb2_server: add some comments about change_to_user() and change_to_root_user()
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jul 8 13:45:46 CEST 2011 on sn-devel-104
Andrew Bartlett [Thu, 7 Jul 2011 23:19:43 +0000 (09:19 +1000)]
lib/param: Merge struct loadparm_service into common
This is handled by a common header and a .c file that is included into
both loadparm.c files.
In the process, _lp functions were renamed to lp__ to allow the common
function definition declarations to be used by source3 and source4
(which have different macro definitions).
The only parameter to change type is 'strict_locking' which was a
bool, and is now an int, to accommodate the 'Auto' value from source3.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri Jul 8 12:35:56 CEST 2011 on sn-devel-104
Andrew Bartlett [Thu, 7 Jul 2011 23:18:09 +0000 (09:18 +1000)]
s3-param use common struct parmlist_entry to hold parametric options
This will allow struct loadparm_service to be shared in future.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 12:03:30 +0000 (22:03 +1000)]
param: Move per-share parameters into a seperate file, to share with s3
This will allow the struct loadparm_service to be in common between
the two loadparm implementations in the tree.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 11:38:46 +0000 (21:38 +1000)]
s4-param Remove offset != -1 checks
No offset values are set to -1 in the parameter table
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 11:35:51 +0000 (21:35 +1000)]
s4-param change to struct bitmap to match s3-param
Andrew Bartlett [Thu, 7 Jul 2011 11:30:02 +0000 (21:30 +1000)]
s4-param Also check the p_class matches when comparing offset
Andrew Bartlett [Thu, 7 Jul 2011 11:16:24 +0000 (21:16 +1000)]
s3-param check for aliases with both p_class and offset
This bug was found when comparing with the source4 loadparm code.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 11:04:31 +0000 (21:04 +1000)]
lib/util Move bitmap.c to lib/util
Andrew Bartlett [Thu, 7 Jul 2011 10:33:55 +0000 (20:33 +1000)]
param: Add hooks to s3 parm_struct and the parameters void * pointer
This is to that the pyparam hooks can use the hooks to connect with
the s3 loadparm system. This now also includes per-service
parameters.
Andrew Bartlett
Andrew Bartlett [Thu, 7 Jul 2011 08:18:38 +0000 (18:18 +1000)]
s3-lib use True and False in bitmap.c
Andrew Bartlett [Thu, 7 Jul 2011 04:10:54 +0000 (14:10 +1000)]
s3-param: calculate default_server_announce at runtime
Andrew Bartlett [Thu, 7 Jul 2011 03:45:13 +0000 (13:45 +1000)]
s3-param Remove lp_set_passdb_backend()
Volker Lendecke [Fri, 8 Jul 2011 08:06:58 +0000 (10:06 +0200)]
s3-zfsacl: Fix a debug message
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Fri Jul 8 11:22:55 CEST 2011 on sn-devel-104
Stefan Metzmacher [Thu, 7 Jul 2011 17:48:43 +0000 (19:48 +0200)]
s3:wscript_build: remove unused variable
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jul 8 02:43:22 CEST 2011 on sn-devel-104
Stefan Metzmacher [Thu, 7 Jul 2011 23:03:49 +0000 (01:03 +0200)]
s3:selftest: run SMB2-BASIC
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:torture: add SMB2-BASIC
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_query_directory*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_write*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_read*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_flush*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_close*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_create*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_tcon*() and smb2cli_tdis*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_sesssetup*() and smb2cli_logoff*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add smb2cli_negprot*()
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Stefan Metzmacher [Thu, 5 May 2011 16:12:07 +0000 (18:12 +0200)]
s3:libsmb: add basic smb2 client infrastructure
Based on the initial patch from Volker Lendecke <vl@samba.org>.
metze
Jeremy Allison [Thu, 7 Jul 2011 21:59:41 +0000 (14:59 -0700)]
Fix bug #8293 - SMB2 doesn't rotate the log files often enough.
Move the num_requests field out of the smb1 struct into the generic
struct smbd_server_connection struct. Use it to count SMB2 requests
as well as SMB1 and ensure that check_log_size() is called every 50
SMB2 requests.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Fri Jul 8 01:14:53 CEST 2011 on sn-devel-104
Stefan Metzmacher [Thu, 7 Jul 2011 14:38:33 +0000 (16:38 +0200)]
s3:smb2_server: call change_to_root_user() or smbd_smb2_request_check_tcon()
For all requests which don't operate on a tcon, we should call
change_to_root_user(), to match the SMB1 behavior.
For SMB1 we do the following operations without AS_USER:
/* 0x70 */ { "SMBtcon",reply_tcon,0},
/* 0x71 */ { "SMBtdis",reply_tdis,DO_CHDIR},
/* 0x72 */ { "SMBnegprot",reply_negprot,0},
/* 0x73 */ { "SMBsesssetupX",reply_sesssetup_and_X,0},
/* 0x74 */ { "SMBulogoffX",reply_ulogoffX, 0}, /* ulogoff doesn't give a valid TID */
/* 0x75 */ { "SMBtconX",reply_tcon_and_X,0},
...
/* 0x2b */ { "SMBecho",reply_echo,0},
...
/* 0xa4 */ { "SMBntcancel",reply_ntcancel, 0 },
For SMB2tdis we still call smbd_smb2_request_check_tcon()
as close_cnum() calls change_to_root_user() when needed.
metze
Signed-off-by: Jeremy Allison <jra@samba.org>
Björn Baumbach [Thu, 7 Jul 2011 15:43:46 +0000 (17:43 +0200)]
libcli: remove duplicate of #define NT_STATUS_NO_SUCH_JOB
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu Jul 7 20:29:13 CEST 2011 on sn-devel-104
Björn Baumbach [Thu, 7 Jul 2011 15:36:22 +0000 (17:36 +0200)]
s3-client: Remove use of cli_errstr()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Thu, 7 Jul 2011 15:18:40 +0000 (17:18 +0200)]
s3-libsmb: Remove use of cli_errstr()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Thu, 7 Jul 2011 14:56:05 +0000 (16:56 +0200)]
s3-torture: run_shortname_test: Remove uses of cli_errstr()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Thu, 7 Jul 2011 14:49:12 +0000 (16:49 +0200)]
s3-torture: run_simple_posix_open_test: Remove uses of cli_errstr()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Stefan Metzmacher [Thu, 7 Jul 2011 15:56:19 +0000 (17:56 +0200)]
s3-torture: use nt_errstr() for cli_unlink() error handling
Use nt_errstr() instead of cli_errstr() for error handling on
cli_unlink() calls.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Thu, 7 Jul 2011 14:27:39 +0000 (16:27 +0200)]
s3-torture: introduce check_both_error()
Check if the server produced the expected dos or nt error code like
check_error(), but without a cli_state struct.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Stefan Metzmacher [Thu, 7 Jul 2011 16:16:56 +0000 (18:16 +0200)]
s3:libsmb: finally remove unused cli_state->outbuf
metze
Stefan Metzmacher [Thu, 7 Jul 2011 15:24:32 +0000 (17:24 +0200)]
s3:libsmb: remove unused clistr_push_fn()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 15:57:45 +0000 (17:57 +0200)]
s3:libsmb: remove unused clistr_pull_fn()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 13:38:02 +0000 (15:38 +0200)]
s3:torture/scanner: use trans2_bytes_push_str() in scan_nttrans()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 13:38:02 +0000 (15:38 +0200)]
s3:torture/scanner: use trans2_bytes_push_str() in scan_trans2()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 08:55:00 +0000 (10:55 +0200)]
s3:libsmb: use trans2_bytes_push_str() in cli_tcon_andx_create() for the plaintext password
This makes sure we push the string always in DOS charset.
metze
Stefan Metzmacher [Thu, 7 Jul 2011 08:16:38 +0000 (10:16 +0200)]
s3:libsmb: use trans2_bytes_push_str() in cli_set_ea_path()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 16:36:29 +0000 (18:36 +0200)]
s3:libsmb: use trans2_bytes_push_str() in cli_dfs_get_referral()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 06:58:25 +0000 (08:58 +0200)]
s3:libsmb: use a talloc_stackframe in cli_dfs_get_referral()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 16:24:50 +0000 (18:24 +0200)]
s3:libsmb: use trans2_bytes_push_str/bytes() in cli_list_trans_*()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 16:57:27 +0000 (18:57 +0200)]
s3:libsmb: use clistr_pull_talloc() for short_name in interpret_long_filename()
metze
Stefan Metzmacher [Thu, 7 Jul 2011 12:46:40 +0000 (14:46 +0200)]
s3:libsmb: interpret_long_filename() short_name is always UNICODE
metze
Stefan Metzmacher [Thu, 7 Jul 2011 08:02:36 +0000 (10:02 +0200)]
s3:libsmb: add trans2_bytes_push_bytes()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 16:23:52 +0000 (18:23 +0200)]
s3:libsmb: make trans2_bytes_push_str() non-static
We should use this and get rid of clistr_push().
metze
Stefan Metzmacher [Thu, 7 Jul 2011 13:33:43 +0000 (15:33 +0200)]
s3:utils: avoid cli_nt_error()/cli_errstr() if we already have the status
metze
David Disseldorp [Tue, 5 Jul 2011 13:04:02 +0000 (15:04 +0200)]
s3-printing: remove tdb migration invalid printer name checks
WERR_INVALID_PRINTER_NAME only needed to be handled when printing tdb
migration used spoolss, with winreg such errors are no longer possible.
Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Thu Jul 7 19:15:34 CEST 2011 on sn-devel-104
Günther Deschner [Tue, 5 Jul 2011 12:01:40 +0000 (14:01 +0200)]
s3-printing: make sure to first migrate the printers then the security descriptor.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
David Disseldorp [Tue, 5 Jul 2011 09:34:47 +0000 (11:34 +0200)]
s3-printing: fill info2_mask in printer migration
Also fix possibly uninitialised status return from
printing_tdb_migrate_printer().
Günther Deschner [Tue, 5 Jul 2011 00:33:23 +0000 (02:33 +0200)]
s3-printing: remove spoolss pipe from migration library, only using winreg finally.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 17:47:07 +0000 (19:47 +0200)]
s3-printing: use winreg interface for migration, instead of spoolss.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 22:55:35 +0000 (00:55 +0200)]
s3-printing: safe a ton of roundtrips by reusing existing winreg binding_handles.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 22:16:03 +0000 (00:16 +0200)]
s3-printing: use winreg_internal functions.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 22:16:47 +0000 (00:16 +0200)]
s3-printing: add winreg_internal functions.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 18:09:54 +0000 (20:09 +0200)]
s3-printing: add winreg_printer_binding_handle and remove most of srv_spoolss_util.c.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 17:47:29 +0000 (19:47 +0200)]
s3-printing: add rpc_client/cli_winreg_spoolss.c
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Tue, 5 Jul 2011 09:29:37 +0000 (11:29 +0200)]
s3-waf: make LIBCLI_SPOOLSS a shared library
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Tue, 5 Jul 2011 00:15:35 +0000 (02:15 +0200)]
s3-printing: move spoolss_create_default_devmode/secdesc to init_spoolss.h
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Tue, 5 Jul 2011 00:12:24 +0000 (02:12 +0200)]
s3-printing: move driver_info_ctr_to_info8 to init_spoolss.h
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Günther Deschner [Mon, 4 Jul 2011 23:24:48 +0000 (01:24 +0200)]
s3-printing: move os2 related functions to printing/nt_printing_os2.c.
Guenther
Pair-Programmed-With: David Disseldorp <ddiss@suse.de>
Volker Lendecke [Thu, 7 Jul 2011 13:42:33 +0000 (15:42 +0200)]
s3: Remove a use of cli_errstr
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Jul 7 18:04:26 CEST 2011 on sn-devel-104
Andreas Schneider [Thu, 7 Jul 2011 12:59:51 +0000 (14:59 +0200)]
s3-waf: Fix linking bugs causing segfaults.
As auth_util.c is linked several times the static variables have
different address on different calls. This leads to segfaults.
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Thu Jul 7 16:50:05 CEST 2011 on sn-devel-104
Gregor Beck [Wed, 6 Jul 2011 13:10:27 +0000 (15:10 +0200)]
s3:testparm: avoid spurious warnings about dos mode mapping and create mask if store dos attributes is set
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Jul 7 12:49:01 CEST 2011 on sn-devel-104
Kai Blin [Mon, 27 Jun 2011 09:25:39 +0000 (11:25 +0200)]
s4 provision: Add some of the AD-specific DNS records to the directory
Signed-off-by: Kai Blin <kai@samba.org>
Autobuild-User: Kai Blin <kai@samba.org>
Autobuild-Date: Thu Jul 7 02:29:53 CEST 2011 on sn-devel-104
Kai Blin [Sat, 25 Jun 2011 22:36:25 +0000 (00:36 +0200)]
s4 provision: split up DNS provisioning into generic and samba-specific ldifs
Signed-off-by: Kai Blin <kai@samba.org>
Stefan Metzmacher [Wed, 6 Jul 2011 15:52:33 +0000 (17:52 +0200)]
s4:torture/smb2: s/smb2cli_unlock/test_smb2_unlock
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jul 6 19:07:42 CEST 2011 on sn-devel-104
Stefan Metzmacher [Wed, 6 Jul 2011 15:52:33 +0000 (17:52 +0200)]
s4:torture/smb2: s/smb2cli_lock/test_smb2_lock
metze
Stefan Metzmacher [Wed, 6 Jul 2011 12:35:13 +0000 (14:35 +0200)]
s3:libsmb: use clistr_pull_talloc() in cli_qfilename()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 12:04:15 +0000 (14:04 +0200)]
s3:libsmb: let cli_qfileinfo[_recv]() return recv_flags2
metze
Stefan Metzmacher [Wed, 6 Jul 2011 11:57:20 +0000 (13:57 +0200)]
s3:libsmb: use clistr_pull_talloc() in cli_get_fs_volume_info()
metze
Stefan Metzmacher [Wed, 6 Jul 2011 11:21:41 +0000 (13:21 +0200)]
s3:libsmb: the SMB_QUERY_FS_VOLUME_INFO response needs at least 18 data bytes
metze
Stefan Metzmacher [Wed, 6 Jul 2011 11:04:26 +0000 (13:04 +0200)]
s3:libsmb: don't use cli->inbuf in cli_dfs_get_referral()
The rdata buffer returned by cli_trans() doesn't belong to
cli->inbuf, so don't use it.
metze
Stefan Metzmacher [Wed, 6 Jul 2011 13:57:22 +0000 (15:57 +0200)]
s3:libsmb: fix error handling in cli_dfs_get_referral()
We should not return NT_STATUS_OK on error.
metze
Stefan Metzmacher [Wed, 6 Jul 2011 10:31:41 +0000 (12:31 +0200)]
s3:sharesec: return an error if get_share_security() returns NULL
This indicates an error, as it uses get_share_security_default()
if no security descriptor is configured.
Jeremy, please check.
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jul 6 15:40:23 CEST 2011 on sn-devel-104
Michael Adam [Wed, 6 Jul 2011 10:24:13 +0000 (12:24 +0200)]
s3:test: catch more errors in test_access_check() in the smbclient_s3 test
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Wed Jul 6 14:07:13 CEST 2011 on sn-devel-104
Michael Adam [Wed, 6 Jul 2011 10:09:52 +0000 (12:09 +0200)]
s3:registry: update copyright for the registry db implementation
Michael Adam [Wed, 6 Jul 2011 08:37:40 +0000 (10:37 +0200)]
examples/VFS: try to fix the build on openbsd, adding alternative spellings of autoconf/header
The host "samba-amd64" on the build farm running openbsd 4.8 broke.
Taking over the additional spellings of autoconf and autoheader from
the source3/autogen.sh script should fix it.
Stefan Metzmacher [Tue, 5 Jul 2011 14:59:41 +0000 (16:59 +0200)]
s3:sharesec: also initialize pgranted if get_share_security() returns NULL
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Jul 6 12:54:30 CEST 2011 on sn-devel-104
Volker Lendecke [Wed, 6 Jul 2011 07:39:08 +0000 (09:39 +0200)]
s3: Follow the TALLOC_FREE convention in source3
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Jul 6 11:01:05 CEST 2011 on sn-devel-104
Volker Lendecke [Wed, 6 Jul 2011 07:37:04 +0000 (09:37 +0200)]
s3: Fix Coverity ID 2586 -- NO_EFFECT
tsocket_address_bsd_sockaddr returns ssize_t, and on some systems socklen_t is
unsigned. So (len < 0) could never have turned true.
Volker
Volker Lendecke [Tue, 5 Jul 2011 17:55:25 +0000 (19:55 +0200)]
s3: Remove cli_errstr from cmd_posix_open
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Jul 6 09:45:11 CEST 2011 on sn-devel-104
Volker Lendecke [Tue, 5 Jul 2011 17:51:09 +0000 (19:51 +0200)]
s3: Fix error logic in posix_open
Volker Lendecke [Tue, 5 Jul 2011 17:42:46 +0000 (19:42 +0200)]
s3: Remove a few uses of cli_errstr
Volker Lendecke [Sun, 3 Jul 2011 18:53:55 +0000 (20:53 +0200)]
s3: make cli_resolve_path return NTSTATUS
This looks larger than it is. No parameters needed changing.
Rusty Russell [Wed, 6 Jul 2011 05:17:44 +0000 (14:47 +0930)]
ccan/tally: don't use SIZE_MAX.
Michael Adam points out this broke the build farm (ie. OSF1 axp V5.1 2650 alpha)
so fixed in CCAN and imported from
af7a902d74a7926693f55da9e21a67dde46931d4:
Turns out it's not standard (thanks Samba build farm!)
And the previous test had a hole in it anyway. This one is more conservative.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Jul 6 08:34:05 CEST 2011 on sn-devel-104
Andrew Bartlett [Wed, 6 Jul 2011 03:09:17 +0000 (13:09 +1000)]
build: we no longer put #if _SAMBA_BUILD_ == 4 in public headers
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed Jul 6 06:46:50 CEST 2011 on sn-devel-104
Andrew Bartlett [Wed, 6 Jul 2011 02:49:11 +0000 (12:49 +1000)]
s3-build We no longer require to redefine _SAMBA_BUILD_
git.samba.org / samba.git / log