use POSIX;
use target::Samba;
+sub have_ads($) {
+ my ($self) = @_;
+ my $found_ads = 0;
+ my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
+ open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
+
+ while (<IN>) {
+ if (/WITH_ADS/) {
+ $found_ads = 1;
+ }
+ }
+ close IN;
+
+ # If we were not built with ADS support, pretend we were never even available
+ print "smbd does not have ADS support\n" unless $found_ads;
+ return $found_ads;
+}
+
+# return smb.conf parameters applicable to @path, based on the underlying
+# filesystem type
+sub get_fs_specific_conf($$)
+{
+ my ($self, $path) = @_;
+ my $mods = "";
+ my $stat_out = `stat --file-system $path` or return "";
+
+ if ($stat_out =~ m/Type:\s+btrfs/) {
+ $mods .= "btrfs ";
+ }
+
+ if ($mods) {
+ return "vfs objects = $mods";
+ }
+
+ return undef;
+}
+
sub new($$) {
my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
my $self = { vars => {},
sub teardown_env($$)
{
my ($self, $envvars) = @_;
+ my $count = 0;
- my $smbdpid = read_pid($envvars, "smbd");
- my $nmbdpid = read_pid($envvars, "nmbd");
- my $winbinddpid = read_pid($envvars, "winbindd");
+ # This should cause smbd to terminate gracefully
+ close($envvars->{STDIN_PIPE});
+
+ my $smbdpid = $envvars->{SMBD_TL_PID};
+ my $nmbdpid = $envvars->{NMBD_TL_PID};
+ my $winbinddpid = $envvars->{WINBINDD_TL_PID};
+
+ # This should give it time to write out the gcov data
+ until ($count > 20) {
+ my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
+ my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
+ my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
+ if ($smbdchild == -1
+ && $nmbdchild == -1
+ && $winbinddchild == -1) {
+ last;
+ }
+ sleep(1);
+ $count++;
+ }
+
+ if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
+ return;
+ }
$self->stop_sig_term($smbdpid);
$self->stop_sig_term($nmbdpid);
$self->stop_sig_term($winbinddpid);
- sleep(2);
+ $count = 0;
+ until ($count > 10) {
+ my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
+ my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
+ my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
+ if ($smbdchild == -1
+ && $nmbdchild == -1
+ && $winbinddchild == -1) {
+ last;
+ }
+ sleep(1);
+ $count++;
+ }
+ if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
+ return;
+ }
+
+ warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
$self->stop_sig_kill($smbdpid);
$self->stop_sig_kill($nmbdpid);
$self->stop_sig_kill($winbinddpid);
{
my ($self, $envvars) = @_;
+ my $childpid = waitpid(-1, WNOHANG);
+
# TODO ...
return 1;
}
sub setup_env($$$)
{
my ($self, $envname, $path) = @_;
-
+
+ $ENV{ENVNAME} = $envname;
+
+ if (defined($self->{vars}->{$envname})) {
+ return $self->{vars}->{$envname};
+ }
+
if ($envname eq "s3dc") {
return $self->setup_s3dc("$path/s3dc");
- } elsif ($envname eq "secshare") {
- return $self->setup_secshare("$path/secshare");
+ } elsif ($envname eq "simpleserver") {
+ return $self->setup_simpleserver("$path/simpleserver");
} elsif ($envname eq "maptoguest") {
return $self->setup_maptoguest("$path/maptoguest");
} elsif ($envname eq "ktest") {
return $self->setup_ktest("$path/ktest");
- } elsif ($envname eq "secserver") {
- if (not defined($self->{vars}->{s3dc})) {
- if (not defined($self->setup_s3dc("$path/s3dc"))) {
- return undef;
- }
- }
- return $self->setup_secserver("$path/secserver", $self->{vars}->{s3dc});
} elsif ($envname eq "member") {
if (not defined($self->{vars}->{s3dc})) {
if (not defined($self->setup_s3dc("$path/s3dc"))) {
domain master = yes
domain logons = yes
lanman auth = yes
+
+ rpc_server:epmapper = external
+ rpc_server:spoolss = external
+ rpc_server:lsarpc = external
+ rpc_server:samr = external
+ rpc_server:netlogon = external
+ rpc_server:register_embedded_np = yes
+
+ rpc_daemon:epmd = fork
+ rpc_daemon:spoolssd = fork
+ rpc_daemon:lsasd = fork
";
my $vars = $self->provision($path,
"LOCALS3DC2",
- 2,
"locals3dc2pass",
$s3dc_options);
$vars or return undef;
- $self->check_or_start($vars,
- "yes", "yes", "yes");
-
- if (not $self->wait_for_start($vars)) {
+ if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
return undef;
}
$vars->{DC_SERVER} = $vars->{SERVER};
$vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
+ $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
$vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
$vars->{DC_USERNAME} = $vars->{USERNAME};
$vars->{DC_PASSWORD} = $vars->{PASSWORD};
my $member_options = "
security = domain
server signing = on
+ dbwrap_tdb_mutexes:* = yes
";
my $ret = $self->provision($prefix,
"LOCALMEMBER3",
- 3,
"localmember3pass",
$member_options);
return undef;
}
- $self->check_or_start($ret, "yes", "yes", "yes");
-
- if (not $self->wait_for_start($ret)) {
+ if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
return undef;
}
$ret->{DC_SERVER} = $s3dcvars->{SERVER};
$ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
+ $ret->{DC_SERVER_IPV6} = $s3dcvars->{SERVER_IPV6};
$ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
$ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
$ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
sub setup_admember($$$$)
{
- my ($self, $prefix, $dcvars, $iface) = @_;
+ my ($self, $prefix, $dcvars) = @_;
+
+ # If we didn't build with ADS, pretend this env was never available
+ if (not $self->have_ads()) {
+ return "UNKNOWN";
+ }
- print "PROVISIONING S3 AD MEMBER$iface...";
+ print "PROVISIONING S3 AD MEMBER...";
my $member_options = "
security = ads
";
my $ret = $self->provision($prefix,
- "LOCALADMEMBER$iface",
- $iface,
- "loCalMember${iface}Pass",
+ "LOCALADMEMBER",
+ "loCalMemberPass",
$member_options);
$ret or return undef;
# access the share for tests.
chmod 0777, "$prefix/share";
- $self->check_or_start($ret,
- "yes", "yes", "yes");
-
- $self->wait_for_start($ret);
+ if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
+ return undef;
+ }
$ret->{DC_SERVER} = $dcvars->{SERVER};
$ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
+ $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
$ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
$ret->{DC_USERNAME} = $dcvars->{USERNAME};
$ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
return $ret;
}
-sub setup_plugin_s4_dc($$$$)
+sub setup_admember_rfc2307($$$$)
{
- my ($self, $prefix, $dcvars, $iface) = @_;
+ my ($self, $prefix, $dcvars) = @_;
- print "PROVISIONING S4 PLUGIN AD DC$iface...";
+ # If we didn't build with ADS, pretend this env was never available
+ if (not $self->have_ads()) {
+ return "UNKNOWN";
+ }
+
+ print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
- my $plugin_s4_dc_options = "
+ my $member_options = "
+ security = ads
+ server signing = on
workgroup = $dcvars->{DOMAIN}
realm = $dcvars->{REALM}
-
- security = ads
- domain logons = yes
- passdb backend = samba4
- auth methods = guest samba4
- server signing = on
-
- rpc_server:epmapper = disabled
- rpc_server:rpcecho = disabled
- rpc_server:dssetup = disabled
- rpc_server:svctl = disabled
- rpc_server:ntsvcs = disabled
- rpc_server:eventlog = disabled
- rpc_server:initshutdown = disabled
-
- rpc_server:winreg = embedded
- rpc_server:srvsvc = embedded
- rpc_server:netdfs = embedded
- rpc_server:wkssvc = embedded
- rpc_server:spoolss = embedded
-
- rpc_server:lsarpc = external
- rpc_server:netlogon = external
- rpc_server:samr = external
-
- rpc_daemon:epmd = disabled
- rpc_daemon:lsasd = disabled
- rpc_daemon:spoolssd = disabled
-
- rpc_server:tcpip = no
-
-[IPC\$]
- vfs objects = dfs_samba4
+ idmap config $dcvars->{DOMAIN} : backend = rfc2307
+ idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
+ idmap config $dcvars->{DOMAIN} : ldap_server = ad
+ idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
+ idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
";
my $ret = $self->provision($prefix,
- "plugindc",
- $iface,
- "pluGin${iface}Pass",
- $plugin_s4_dc_options, 1);
+ "RFC2307MEMBER",
+ "loCalMemberPass",
+ $member_options);
$ret or return undef;
close(USERMAP);
$ret->{DOMAIN} = $dcvars->{DOMAIN};
$ret->{REALM} = $dcvars->{REALM};
- $ret->{KRB5_CONFIG} = $dcvars->{KRB5_CONFIG};
+
+ my $ctx;
+ my $prefix_abs = abs_path($prefix);
+ $ctx = {};
+ $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
+ $ctx->{domain} = $dcvars->{DOMAIN};
+ $ctx->{realm} = $dcvars->{REALM};
+ $ctx->{dnsname} = lc($dcvars->{REALM});
+ $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
+ Samba::mk_krb5_conf($ctx, "");
+
+ $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
+
+ my $net = Samba::bindir_path($self, "net");
+ my $cmd = "";
+ $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
+ $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
+ $cmd .= "$net join $ret->{CONFIGURATION}";
+ $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
+
+ if (system($cmd) != 0) {
+ warn("Join failed\n$cmd");
+ return undef;
+ }
# We need world access to this share, as otherwise the domain
# administrator from the AD domain provided by Samba4 can't
# access the share for tests.
chmod 0777, "$prefix/share";
- $self->check_or_start($ret,
- "no", "no", "yes");
+ if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
+ return undef;
+ }
- $self->wait_for_start($ret);
+ $ret->{DC_SERVER} = $dcvars->{SERVER};
+ $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
+ $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
+ $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
+ $ret->{DC_USERNAME} = $dcvars->{USERNAME};
+ $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
# Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
$ret->{target} = $self;
return $ret;
}
-sub setup_secshare($$)
+sub setup_simpleserver($$)
{
my ($self, $path) = @_;
print "PROVISIONING server with security=share...";
- my $secshare_options = "
- security = share
+ my $prefix_abs = abs_path($path);
+
+ my $simpleserver_options = "
lanman auth = yes
+ vfs objects = xattr_tdb streams_depot
+
+[vfs_aio_fork]
+ path = $prefix_abs/share
+ vfs objects = aio_fork
+ read only = no
+ vfs_aio_fork:erratic_testing_mode=yes
";
my $vars = $self->provision($path,
"LOCALSHARE4",
- 4,
"local4pass",
- $secshare_options);
+ $simpleserver_options);
$vars or return undef;
- $self->check_or_start($vars, "yes", "no", "yes");
-
- if (not $self->wait_for_start($vars)) {
+ if (not $self->check_or_start($vars, "yes", "no", "yes")) {
return undef;
}
- $self->{vars}->{secshare} = $vars;
+ $self->{vars}->{simpleserver} = $vars;
return $vars;
}
-sub setup_secserver($$$)
-{
- my ($self, $prefix, $s3dcvars) = @_;
-
- print "PROVISIONING server with security=server...";
-
- my $secserver_options = "
- security = server
- password server = $s3dcvars->{SERVER_IP}
-";
-
- my $ret = $self->provision($prefix,
- "LOCALSERVER5",
- 5,
- "localserver5pass",
- $secserver_options);
-
- $ret or return undef;
-
- $self->check_or_start($ret, "yes", "no", "yes");
-
- if (not $self->wait_for_start($ret)) {
- return undef;
- }
-
- $ret->{DC_SERVER} = $s3dcvars->{SERVER};
- $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
- $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
- $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
- $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
-
- return $ret;
-}
-
sub setup_ktest($$$)
{
my ($self, $prefix) = @_;
+ # If we didn't build with ADS, pretend this env was never available
+ if (not $self->have_ads()) {
+ return "UNKNOWN";
+ }
+
print "PROVISIONING server with security=ads...";
my $ktest_options = "
realm = ktest.samba.example.com
security = ads
username map = $prefix/lib/username.map
+ server signing = required
";
my $ret = $self->provision($prefix,
"LOCALKTEST6",
- 6,
"localktest6pass",
$ktest_options);
system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
chmod 0600, "$prefix/private/secrets.tdb";
+#Make sure there's no old ntdb file.
+ system("rm -f $prefix/private/secrets.ntdb");
+
#This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
# "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
#
# access the share for tests.
chmod 0777, "$prefix/share";
- $self->check_or_start($ret, "yes", "no", "yes");
-
- if (not $self->wait_for_start($ret)) {
+ if (not $self->check_or_start($ret, "yes", "no", "yes")) {
return undef;
}
return $ret;
my $vars = $self->provision($path,
"maptoguest",
- 7,
"maptoguestpass",
$options);
$vars or return undef;
- $self->check_or_start($vars,
- "yes", "no", "yes");
-
- if (not $self->wait_for_start($vars)) {
+ if (not $self->check_or_start($vars, "yes", "no", "yes")) {
return undef;
}
sub check_or_start($$$$$) {
my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
+ # use a pipe for stdin in the child processes. This allows
+ # those processes to monitor the pipe for EOF to ensure they
+ # exit when the test script exits
+ pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
+
unlink($env_vars->{NMBD_TEST_LOG});
print "STARTING NMBD...";
my $pid = fork();
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
- $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
+ $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
- $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
+ $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
+ $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
- $ENV{UID_WRAPPER} = "1";
+ $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
if ($nmbd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
exit 0;
}
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
my @optargs = ("-d0");
if (defined($ENV{NMBD_OPTIONS})) {
@optargs = split(/ /, $ENV{NMBD_OPTIONS});
}
-
- $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
-
my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{NMBD_VALGRIND})) {
@preargs = split(/ /, $ENV{NMBD_VALGRIND});
}
+ my @args = ("-F", "--no-process-group",
+ "-s", $env_vars->{SERVERCONFFILE},
+ "-l", $env_vars->{LOGDIR});
+ if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
+ push(@args, "--log-stdout");
+ }
- exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
+ close($env_vars->{STDIN_PIPE});
+ open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
+
+ exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
+ or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
}
+ $env_vars->{NMBD_TL_PID} = $pid;
write_pid($env_vars, "nmbd", $pid);
print "DONE\n";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
- $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
+ $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
- $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
+ $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
+ $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
- $ENV{UID_WRAPPER} = "1";
+ $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
if ($winbindd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
exit 0;
}
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
my @optargs = ("-d0");
if (defined($ENV{WINBINDD_OPTIONS})) {
@optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
}
-
- $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
-
my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{WINBINDD_VALGRIND})) {
@preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
}
+ my @args = ("-F", "--no-process-group",
+ "-s", $env_vars->{SERVERCONFFILE},
+ "-l", $env_vars->{LOGDIR});
+ if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
+ push(@args, "--stdout");
+ }
- print "Starting winbindd with config $env_vars->{SERVERCONFFILE}\n";
+ close($env_vars->{STDIN_PIPE});
+ open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
- exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
+ exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
+ or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
}
+ $env_vars->{WINBINDD_TL_PID} = $pid;
write_pid($env_vars, "winbindd", $pid);
print "DONE\n";
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
- $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
+ $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
- $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
+ $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
+ $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
- $ENV{UID_WRAPPER} = "1";
+ $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
if ($smbd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
if(defined($ENV{SMBD_VALGRIND})) {
@preargs = split(/ /,$ENV{SMBD_VALGRIND});
}
- exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
+ my @args = ("-F", "--no-process-group",
+ "-s", $env_vars->{SERVERCONFFILE},
+ "-l", $env_vars->{LOGDIR});
+ if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
+ push(@args, "--log-stdout");
+ }
+
+ close($env_vars->{STDIN_PIPE});
+ open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
+
+ exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
+ or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
}
+ $env_vars->{SMBD_TL_PID} = $pid;
write_pid($env_vars, "smbd", $pid);
print "DONE\n";
- return 0;
+ close(STDIN_READER);
+
+ return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
}
-sub provision($$$$$$$)
+sub provision($$$$$$)
{
- my ($self, $prefix, $server, $swiface, $password, $extra_options, $no_delete_prefix) = @_;
+ my ($self, $prefix, $server, $password, $extra_options, $no_delete_prefix) = @_;
##
## setup the various environment variables we need
##
+ my $swiface = Samba::get_interface($server);
my %ret = ();
my $server_ip = "127.0.0.$swiface";
+ my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
my $domain = "SAMBA-TEST";
my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
my $prefix_abs = abs_path($prefix);
my $bindir_abs = abs_path($self->{bindir});
- my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
}
mkdir($_, 0777) foreach(@dirs);
+ my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
+
+ ##
+ ## lockdir and piddir must be 0755
+ ##
+ chmod 0755, $lockdir;
+ chmod 0755, $piddir;
+
+
##
## create ro and msdfs share layout
##
close(MSDFS_TARGET);
chmod 0666, $msdfs_target;
symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
- symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
+ symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
my $conffile="$libdir/server.conf";
my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
my $nss_wrapper_passwd = "$privatedir/passwd";
my $nss_wrapper_group = "$privatedir/group";
+ my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
##
my ($max_uid, $max_gid);
- my ($uid_nobody, $uid_root);
- my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers);
+ my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2);
+ my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
- if ($unix_uid < 0xffff - 2) {
+ if ($unix_uid < 0xffff - 4) {
$max_uid = 0xffff;
} else {
$max_uid = $unix_uid;
$uid_root = $max_uid - 1;
$uid_nobody = $max_uid - 2;
+ $uid_pdbtest = $max_uid - 3;
+ $uid_pdbtest2 = $max_uid - 4;
- if ($unix_gids[0] < 0xffff - 3) {
+ if ($unix_gids[0] < 0xffff - 5) {
$max_gid = 0xffff;
} else {
$max_gid = $unix_gids[0];
$gid_nogroup = $max_gid - 2;
$gid_root = $max_gid - 3;
$gid_domusers = $max_gid - 4;
+ $gid_domadmins = $max_gid - 5;
##
## create conffile
print CONF "
[global]
netbios name = $server
- interfaces = $server_ip/8
+ interfaces = $server_ip/8 $server_ipv6/64
bind interfaces only = yes
- panic action = $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
+ panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
+ smbd:suicide mode = yes
workgroup = $domain
pid directory = $piddir
lock directory = $lockdir
log file = $logdir/log.\%m
- log level = 0
+ log level = 1
debug pid = yes
max log size = 0
printing = bsd
printcap name = /dev/null
- winbindd:socket dir = $wbsockdir
+ winbindd socket directory = $wbsockdir
nmbd:socket dir = $nmbdsockdir
idmap config * : range = 100000-200000
winbind enum users = yes
winbind enum groups = yes
+ winbind separator = /
# min receivefile size = 4000
- max protocol = SMB2
read only = no
server signing = auto
smbd:sharedelay = 100000
-# smbd:writetimeupdatedelay = 500000
+ smbd:writetimeupdatedelay = 500000
map hidden = no
map system = no
map readonly = no
store dos attributes = yes
create mask = 755
dos filemode = yes
- vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
+ vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
printing = vlp
print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
lpq cache time = 0
+ print notify backchannel = yes
ncalrpc dir = $prefix_abs/ncalrpc
- rpc_server:epmapper = external
- rpc_server:spoolss = external
- rpc_server:lsarpc = external
- rpc_server:samr = external
- rpc_server:netlogon = external
- rpc_server:tcpip = yes
-
- rpc_daemon:epmd = fork
- rpc_daemon:spoolssd = fork
- rpc_daemon:lsasd = fork
-
resolv:host file = $dns_host_file
# The samba3.blackbox.smbclient_s3 test uses this to test that
[tmp]
path = $shrdir
comment = smb username is [%U]
+[tmpsort]
+ path = $shrdir
+ comment = Load dirsort module
+ vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
+[tmpenc]
+ path = $shrdir
+ comment = encrypt smb username is [%U]
+ smb encrypt = required
+ vfs objects = dirsort
[tmpguest]
path = $shrdir
guest ok = yes
[ro-tmp]
path = $ro_shrdir
guest ok = yes
+[write-list-tmp]
+ path = $shrdir
+ read only = yes
+ write list = $unix_name
+[valid-users-tmp]
+ path = $shrdir
+ valid users = $unix_name
[msdfs-share]
path = $msdfs_shrdir
msdfs root = yes
[hideunwrite]
copy = tmp
hide unwriteable files = yes
+[durable]
+ copy = tmp
+ kernel share modes = no
+ kernel oplocks = no
+ posix locking = no
+[fs_specific]
+ copy = tmp
+ $fs_specific_conf
[print1]
copy = tmp
printable = yes
copy = print1
[print3]
copy = print1
+ default devmode = no
[lp]
copy = print1
+
+[nfs4acl_simple]
+ path = $shrdir
+ comment = smb username is [%U]
+ nfs4:mode = simple
+ vfs objects = nfs4acl_xattr xattr_tdb
+
+[nfs4acl_special]
+ path = $shrdir
+ comment = smb username is [%U]
+ nfs4:mode = special
+ vfs objects = nfs4acl_xattr xattr_tdb
+
[xcopy_share]
path = $shrdir
comment = smb username is [%U]
create mask = 777
force create mode = 777
+[posix_share]
+ path = $shrdir
+ comment = smb username is [%U]
+ create mask = 0777
+ force create mode = 0
+ directory mask = 0777
+ force directory mode = 0
+ vfs objects = xattr_tdb
+[aio]
+ copy = tmp
+ aio read size = 1
+ aio write size = 1
+
[print\$]
copy = tmp
+
+[vfs_fruit]
+ path = $shrdir
+ vfs objects = catia fruit streams_xattr
+ fruit:ressource = file
+ fruit:metadata = netatalk
+ fruit:locking = netatalk
+ fruit:encoding = native
";
close(CONF);
}
print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
$unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
+pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
+pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
";
if ($unix_uid != 0) {
- print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false";
+ print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
+";
}
close(PASSWD);
nogroup:x:$gid_nogroup:nobody
$unix_name-group:x:$unix_gids[0]:
domusers:X:$gid_domusers:
+domadmins:X:$gid_domadmins:
";
if ($unix_gids[0] != 0) {
- print GROUP "root:x:$gid_root:";
+ print GROUP "root:x:$gid_root:
+";
}
close(GROUP);
+ ## hosts
+ my $hostname = lc($server);
+ unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
+ warn("Unable to open $nss_wrapper_hosts");
+ return undef;
+ }
+ print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
+ print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
+ close(HOSTS);
+
+
foreach my $evlog (@eventlog_list) {
my $evlogtdb = "$eventlogdir/$evlog.tdb";
open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
$ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
+ $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
- my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
+ my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
unless (open(PWD, "|$cmd")) {
warn("Unable to set password for test account\n$cmd");
return undef;
}
print "DONE\n";
- open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
- print HOSTS "A $server. $server_ip
-";
- close(HOSTS);
+ open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
+ print DNS_UPDATE_LIST "A $server. $server_ip\n";
+ print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
+ close(DNS_UPDATE_LIST);
+
+ if (system("$ENV{SRCDIR_ABS}/source4/scripting/bin/samba_dnsupdate --all-interfaces --use-file=$dns_host_file -s $conffile --update-list=$prefix/dns_update_list --update-cache=$prefix/dns_update_cache --no-substiutions --no-credentials") != 0) {
+ die "Unable to update hostname into $dns_host_file";
+ }
$ret{SERVER_IP} = $server_ip;
+ $ret{SERVER_IPV6} = $server_ipv6;
$ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
$ret{NMBD_TEST_LOG_POS} = 0;
$ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
$ret{NETBIOSNAME} = $server;
$ret{PASSWORD} = $password;
$ret{PIDDIR} = $piddir;
- $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
+ $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
$ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
$ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
$ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
$ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
- $ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
- if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
- $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
- }
+ $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
+ $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
+ $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
$ret{LOCAL_PATH} = "$shrdir";
+ $ret{LOGDIR} = $logdir;
return \%ret;
}
-sub wait_for_start($$)
+sub wait_for_start($$$$$)
{
- my ($self, $envvars) = @_;
+ my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
+ my $ret;
- # give time for nbt server to register its names
- print "delaying for nbt name registration\n";
- sleep(10);
- # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
- system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
- system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
- system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
- system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
- system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
+ if ($nmbd eq "yes") {
+ my $count = 0;
- # make sure smbd is also up set
- print "wait for smbd\n";
+ # give time for nbt server to register its names
+ print "checking for nmbd\n";
- my $count = 0;
- my $ret;
- do {
- $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
- if ($ret != 0) {
- sleep(2);
+ # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
+ my $nmblookup = Samba::bindir_path($self, "nmblookup");
+
+ do {
+ $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
+ if ($ret != 0) {
+ sleep(1);
+ } else {
+ system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
+ system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
+ system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
+ system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
+ }
+ $count++;
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "NMBD not reachable after 10 retries\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
+ }
+
+ if ($winbindd eq "yes") {
+ print "checking for winbindd\n";
+ my $count = 0;
+ do {
+ $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++;
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "WINBINDD not reachable after 20 seconds\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
+ }
+
+ if ($smbd eq "yes") {
+ # make sure smbd is also up set
+ print "wait for smbd\n";
+
+ my $count = 0;
+ do {
+ $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "SMBD failed to start up in a reasonable time (20sec)\n";
+ teardown_env($self, $envvars);
+ return 0;
}
- $count++
- } while ($ret != 0 && $count < 10);
- if ($count == 10) {
- print "SMBD failed to start up in a reasonable time (20sec)\n";
- teardown_env($self, $envvars);
- return 0;
}
+
# Ensure we have domain users mapped.
$ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
if ($ret != 0) {
return 1;
}
+ $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
+ if ($ret != 0) {
+ return 1;
+ }
+
+ if ($winbindd eq "yes") {
+ # note: creating builtin groups requires winbindd for the
+ # unix id allocator
+ $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
+ if ($ret != 0) {
+ print "Failed to create BUILTIN\\Users group\n";
+ return 0;
+ }
+ my $count = 0;
+ do {
+ system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
+ $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++;
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "WINBINDD not reachable after 20 seconds\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
+ }
print $self->getlog_env($envvars);
git.samba.org / samba.git / blobdiff