mailto(samba-bugs@samba.anu.edu.au) manpage(swat htmlcommand((8)))(8)(23 Oct 1998)(Samba)(SAMBA) label(NAME) manpagename(swat)(swat - Samba Web Administration Tool) label(SYNOPSIS) manpagesynopsis() bf(swat) [link(-s smb config file)(minuss)] [link(-a)(minusa)] label(DESCRIPTION) manpagedescription() This program is part of the bf(Samba) suite. bf(swat) allows a Samba administrator to configure the complex url(bf(smb.conf))(smb.conf.5.html) file via a Web browser. In addition, a swat configuration page has help links to all the configurable options in the url(bf(smb.conf))(smb.conf.5.html) file allowing an administrator to easily look up the effects of any change. bf(swat) can be run as a stand-alone daemon, from bf(inetd), or invoked via CGI from a Web server. label(OPTIONS) manpageoptions() startdit() label(minuss) dit(bf(-s smb configuration file)) The default configuration file path is determined at compile time. The file specified contains the configuration details required by the url(bf(smbd))(smbd.8.html) server. This is the file that bf(swat) will modify. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See url(smb.conf (5))(smb.conf.5.html) for more information. label(minusa) dit(bf(-a)) This option is only used if bf(swat) is running as it's own mini-web server (see the link(bf(INSTALLATION))(INSTALLATION) section below). This option removes the need for authentication needed to modify the url(bf(smb.conf))(smb.conf.5.html) file. em(**THIS IS ONLY MEANT FOR DEMOING SWAT AND MUST NOT BE SET IN NORMAL SYSTEMS**) as it would allow em(*ANYONE*) to modify the url(bf(smb.conf))(smb.conf.5.html) file, thus giving them root access. endit() label(INSTALLATION) manpagesection(INSTALLATION) After you compile SWAT you need to run tt("make install") to install the swat binary and the various help files and images. A default install would put these in: verb( /usr/local/samba/bin/swat /usr/local/samba/swat/images/* /usr/local/samba/swat/help/* ) label(RUNNINGVIAINETD) manpagesection(RUNNING VIA INETD) You need to edit your tt(/etc/inetd.conf) and tt(/etc/services) to enable bf(SWAT) to be launched via inetd. Note that bf(swat) can also be launched via the cgi-bin mechanisms of a web server (such as apache) and that is described below in the section link(bf(RUNNING VIA CGI-BIN))(RUNNINGVIACGIBIN). In tt(/etc/services) you need to add a line like this: tt(swat 901/tcp) Note for NIS/YP users - you may need to rebuild the NIS service maps rather than alter your local tt(/etc/services) file. the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your bf(inetd) daemon). In tt(/etc/inetd.conf) you should add a line like this: tt(swat stream tcp nowait.400 root /usr/local/samba/bin/swat swat) If you just want to see a demo of how swat works and don't want to be able to actually change any Samba config via swat then you may chose to change tt("root") to some other user that does not have permission to write to url(bf(smb.conf))(smb.conf.5.html). One you have edited tt(/etc/services) and tt(/etc/inetd.conf) you need to send a HUP signal to inetd. To do this use tt("kill -1 PID") where PID is the process ID of the inetd daemon. label(RUNNINGVIACGIBIN) manpagesection(RUNNING VIA CGI-BIN) To run bf(swat) via your web servers cgi-bin capability you need to copy the bf(swat) binary to your cgi-bin directory. Note that you should run bf(swat) either via link(bf(inetd))(RUNNINGVIAINETD) or via cgi-bin but not both. Then you need to create a tt(swat/) directory in your web servers root directory and copy the tt(images/*) and tt(help/*) files found in the tt(swat/) directory of your Samba source distribution into there so that they are visible via the URL tt(http://your.web.server/swat/) Next you need to make sure you modify your web servers authentication to require a username/pssword for the URL tt(http://your.web.server/cgi-bin/swat). em(**Don't forget this step!**) If you do forget it then you will be allowing anyone to edit your Samba configuration which would allow them to easily gain root access on your machine. After testing the authentication you need to change the ownership and permissions on the bf(swat) binary. It should be owned by root with the setuid bit set. It should be ONLY executable by the user that the web server runs as. Make sure you do this carefully! for example, the following would be correct if the web server ran as group tt("nobody"). tt(-rws--x--- 1 root nobody ) You must also realize that this means that any user who can run programs as the tt("nobody") group can run bf(swat) and modify your Samba config. Be sure to think about this! label(LAUNCHING) manpagesection(LAUNCHING) To launch bf(swat) just run your favorite web browser and point it at tt(http://localhost:901/) or tt(http://localhost/cgi-bin/swat/) depending on how you installed it. Note that you can attach to bf(swat) from any IP connected machine but connecting from a remote machine leaves your connection open to password sniffing as passwords will be sent in the clear over the wire. If installed via bf(inetd) then you should be prompted for a username/password when you connect. You will need to provide the username tt("root") and the correct root password. More sophisticated authentication options are planned for future versions of bf(swat). If installed via cgi-bin then you should receive whatever authentication request you configured in your web server. manpagefiles() bf(/etc/inetd.conf) If the server is to be run by the inetd meta-daemon, this file must contain suitable startup information for the meta-daemon. See the section link(bf(RUNNING VIA INETD))(RUNNINGVIAINETD) above. bf(/etc/services) If running the server via the meta-daemon inetd, this file must contain a mapping of service name (e.g., swat) to service port (e.g., 901) and protocol type (e.g., tcp). See the section link(bf(RUNNING VIA INETD))(RUNNINGVIAINETD) above. bf(/usr/local/samba/lib/smb.conf) This is the default location of the em(smb.conf) server configuration file that bf(swat) edits. Other common places that systems install this file are em(/usr/samba/lib/smb.conf) and em(/etc/smb.conf). This file describes all the services the server is to make available to clients. See bf(smb.conf (5)) for more information. label(WARNINGS) manpagesection(WARNINGS) bf(swat) will rewrite your url(bf(smb.conf))(smb.conf.5.html) file. It will rearrange the entries and delete all comments, url(bf("include="))(smb.conf.5.html#include) and url(bf("copy="))(smb.conf.5.html#copy) options. If you have a carefully crafted url(bf(smb.conf))(smb.conf.5.html) then back it up or don't use bf(swat)! label(VERSION) manpagesection(VERSION) This man page is correct for version 2.0 of the Samba suite. label(SEEALSO) manpageseealso() bf(inetd (8)), url(bf(nmbd (8)))(nmbd.8.html), url(bf(smb.conf (5)))(smb.conf.5.html). label(AUTHOR) manpageauthor() The original Samba software and related utilities were created by Andrew Tridgell (samba-bugs@samba.anu.edu.au). Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed. The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open Source software, available at url(bf(ftp://ftp.icce.rug.nl/pub/unix/))(ftp://ftp.icce.rug.nl/pub/unix/)) and updated for the Samba2.0 release by Jeremy Allison. email(samba-bugs@samba.anu.edu.au). See url(bf(samba (7)))(samba.7.html) to find out how to get a full list of contributors and details on how to submit bug reports, comments etc.