1 <?xml version="1.0" encoding="iso-8859-1"?>
2 <!DOCTYPE chapter PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
3 <chapter id="unixclients">
4 <title>Adding Domain Member Servers and Clients</title>
7 <primary>Open Magazine</primary>
8 </indexterm><indexterm>
9 <primary>survey</primary>
11 The most frequently discussed Samba subjects over the past 2 years have focused around domain control and printing.
12 It is well known that Samba is a file and print server. A recent survey conducted by <emphasis>Open Magazine</emphasis> found
13 that of all respondents, 97 percent use Samba for file and print services, and 68 percent use Samba for Domain Control. See the
14 <ulink url="http://www.open-mag.com/cgi-bin/opencgi/surveys/survey.cgi?survey_name=samba">Open-Mag</ulink>
15 Web site for current information. The survey results as found on January 14, 2004, are shown in
16 <link linkend="ch09openmag"/>.
19 <figure id="ch09openmag">
20 <title>Open Magazine Samba Survey</title>
21 <imagefile scale="60">openmag</imagefile>
25 While domain control is an exciting subject, basic file and print sharing remains the staple bread-and-butter
26 function that Samba provides. Yet this book may give the appearance of having focused too much on more
27 exciting aspects of Samba deployment. This chapter directs your attention to provide important information on
28 the addition of Samba servers into your present Windows network &smbmdash; whatever the controlling technology
29 may be. So let's get back to our good friends at Abmas.
33 <title>Introduction</title>
36 <primary>Linux desktop</primary>
37 </indexterm><indexterm>
38 <primary>Domain Member</primary>
39 <secondary>server</secondary>
41 Looking back over the achievements of the past year or two, daily events at Abmas are rather straightforward
42 with not too many distractions or problems. Your team is doing well, but a number of employees
43 are asking for Linux desktop systems. Your network has grown and demands additional domain member servers. Let's
44 get on with this; Christine and Stan are ready to go.
48 <primary>Domain Member</primary>
49 <secondary>desktop</secondary>
51 Stan is firmly in control of the department of the future, while Christine is enjoying a stable and
52 predictable network environment. It is time to add more servers and to add Linux desktops. It is
53 time to meet the demands of future growth and endure trial by fire.
57 <title>Assignment Tasks</title>
60 <primary>Active Directory</primary>
62 You must now add UNIX/Linux domain member servers to your network. You have a friend who has a Windows 2003
63 Active Directory domain network who wants to add a Samba/Linux server and has asked Christine to help him
64 out. Your real objective is to help Christine to see more of the way the Microsoft world lives and use
65 her help to get validation that Samba really does live up to expectations.
69 Over the past 6 months, you have hired several new staff who want Linux on their desktops. You must integrate
70 these systems to make sure that Abmas is not building islands of technology. You ask Christine to
71 do likewise at Swodniw Biz NL (your friend's company) to help them to evaluate a Linux desktop. You want to make
72 the right decision, don't you?
79 <title>Dissection and Discussion</title>
82 <indexterm><primary>winbind</primary></indexterm>
83 Recent Samba mailing-list activity is witness to how many sites are using winbind. Some have no trouble
84 at all with it, yet to others the problems seem insurmountable. Periodically there are complaints concerning
85 an inability to achieve identical user and group IDs between Windows and UNIX environments.
89 You provide step-by-step implementations of the various tools that can be used for identity
90 resolution. You also provide working examples of solutions for integrated authentication for
91 both UNIX/Linux and Windows environments.
95 <title>Technical Issues</title>
98 One of the great challenges we face when people ask us, <quote>What is the best way to solve
99 this problem?</quote> is to get beyond the facts so we not only can clearly comprehend
100 the immediate technical problem, but also can understand how needs may change.
104 <indexterm><primary>integrate</primary></indexterm>
105 There are a few facts we should note when dealing with the question of how best to
106 integrate UNIX/Linux clients and servers into a Windows networking environment:
111 <indexterm><primary>Domain Controller</primary></indexterm>
112 <indexterm><primary>authoritative</primary></indexterm>
113 <indexterm><primary>accounts</primary><secondary>authoritative</secondary></indexterm>
114 <indexterm><primary>PDC</primary></indexterm>
115 <indexterm><primary>BDC</primary></indexterm>
116 A domain controller (PDC or BDC) is always authoritative for all accounts in its domain.
117 This means that a BDC must (of necessity) be able to resolve all account UIDs and GIDs
118 to the same values that the PDC resolved them to.
122 <indexterm><primary>local accounts</primary></indexterm>
123 <indexterm><primary>Domain Member</primary><secondary>authoritative</secondary><tertiary>local accounts</tertiary></indexterm>
124 <indexterm><primary>Domain accounts</primary></indexterm>
125 <indexterm><primary>winbindd</primary></indexterm>
126 A domain member can be authoritative for local accounts, but is never authoritative for
127 domain accounts. If a user is accessing a domain member server and that user's account
128 is not known locally, the domain member server must resolve the identity of that user
129 from the domain in which that user's account resides. It must then map that ID to a
130 UID/GID pair that it can use locally. This is handled by <command>winbindd</command>.
134 Samba, when running on a domain member server, can resolve user identities from a
140 <indexterm><primary>getpwnam</primary></indexterm>
141 <indexterm><primary>getgrnam</primary></indexterm>
142 <indexterm><primary>NSS</primary></indexterm>
143 <indexterm><primary>LDAP</primary></indexterm>
144 <indexterm><primary>NIS</primary></indexterm>
145 By executing a system <command>getpwnam()</command> or <command>getgrnam()</command> call.
146 On systems that support it, this utilizes the name service switch (NSS) facility to
147 resolve names according to the configuration of the <filename>/etc/nsswitch.conf</filename>
148 file. NSS can be configured to use LDAP, winbind, NIS, or local files.
152 <indexterm><primary>passdb backend</primary></indexterm>
153 <indexterm><primary>PADL</primary></indexterm>
154 <indexterm><primary>nss_ldap</primary></indexterm>
155 Performing, via NSS, a direct LDAP search (where an LDAP passdb backend has been configured).
156 This requires the use of the PADL nss_ldap tool (or equivalent).
160 <indexterm><primary>winbindd</primary></indexterm>
161 <indexterm><primary>SID</primary></indexterm>
162 <indexterm><primary>winbindd_idmap.tdb</primary></indexterm>
163 <indexterm><primary>winbindd_cache.tdb</primary></indexterm>
164 Directly by querying <command>winbindd</command>. The <command>winbindd</command>
165 contacts a domain controller to attempt to resolve the identity of the user or group. It
166 receives the Windows networking security identifier (SID) for that appropriate
167 account and then allocates a local UID or GID from the range of available IDs and
168 creates an entry in its <filename>winbindd_idmap.tdb</filename> and
169 <filename>winbindd_cache.tdb</filename> files.
173 <indexterm><primary>idmap backend</primary></indexterm>
174 <indexterm><primary>mapping</primary></indexterm>
175 If the parameter <smbconfoption name="idmap backend">ldap:ldap://myserver.domain</smbconfoption>
176 was specified and the LDAP server has been configured with a container in which it may
177 store the IDMAP entries, all domain members may share a common mapping.
182 Irrespective of how &smb.conf; is configured, winbind creates and caches a local copy of
183 the ID mapping database. It uses the <filename>winbindd_idmap.tdb</filename> and
184 <filename>winbindd_cache.tdb</filename> files to do this.
188 Which of the resolver methods is chosen is determined by the way that Samba is configured
189 in the &smb.conf; file. Some of the configuration options are rather less than obvious to the
194 <indexterm><primary>winbind trusted domains only</primary></indexterm>
195 <indexterm><primary>domain member</primary><secondary>servers</secondary></indexterm>
196 <indexterm><primary>domain controllers</primary></indexterm>
197 If you wish to make use of accounts (users and/or groups) that are local to (i.e., capable
198 of being resolved using) the NSS facility, it is possible to use the
199 <smbconfoption name="winbind trusted domains only">Yes</smbconfoption>
200 in the &smb.conf; file. This parameter specifically applies to domain controllers,
201 and to domain member servers.
207 <indexterm><primary>Posix accounts</primary></indexterm>
208 <indexterm><primary>Samba accounts</primary></indexterm>
209 <indexterm><primary>LDAP</primary></indexterm>
210 For many administrators, it should be plain that the use of an LDAP-based repository for all network
211 accounts (both for POSIX accounts and for Samba accounts) provides the most elegant and
212 controllable facility. You eventually appreciate the decision to use LDAP.
216 <indexterm><primary>nss_ldap</primary></indexterm>
217 <indexterm><primary>identifiers</primary></indexterm>
218 <indexterm><primary>resolve</primary></indexterm>
219 If your network account information resides in an LDAP repository, you should use it ahead of any
220 alternative method. This means that if it is humanly possible to use the <command>nss_ldap</command>
221 tools to resolve UNIX account UIDs/GIDs via LDAP, this is the preferred solution, because it provides
222 a more readily controllable method for asserting the exact same user and group identifiers
223 throughout the network.
227 <indexterm><primary>Domain Member</primary><secondary>server</secondary></indexterm>
228 <indexterm><primary>winbind trusted domains only</primary></indexterm>
229 <indexterm><primary>getpwnam</primary></indexterm>
230 <indexterm><primary>smbd</primary></indexterm>
231 <indexterm><primary>Trusted Domains</primary></indexterm>
232 <indexterm><primary>External Domains</primary></indexterm>
233 In the situation where UNIX accounts are held on the domain member server itself, the only effective
234 way to use them involves the &smb.conf; entry
235 <smbconfoption name="winbind trusted domains only">Yes</smbconfoption>. This forces
236 Samba (<command>smbd</command>) to perform a <command>getpwnam()</command> system call that can
237 then be controlled via <filename>/etc/nsswitch.conf</filename> file settings. The use of this parameter
238 disables the use of Samba with trusted domains (i.e., external domains).
242 <indexterm><primary>appliance mode</primary></indexterm>
243 <indexterm><primary>Domain Member</primary><secondary>server</secondary></indexterm>
244 <indexterm><primary>winbindd</primary></indexterm>
245 <indexterm><primary>automatically allocate</primary></indexterm>
246 Winbind can be used to create an appliance mode domain member server. In this capacity, <command>winbindd</command>
247 is configured to automatically allocate UIDs/GIDs from numeric ranges set in the &smb.conf; file. The allocation
248 is made for all accounts that connect to that domain member server, whether within its own domain or from
249 trusted domains. If not stored in an LDAP backend, each domain member maintains its own unique mapping database.
250 This means that it is almost certain that a given user who accesses two domain member servers does not have the
251 same UID/GID on both servers &smbmdash; however, this is transparent to the Windows network user. This data
252 is stored in the <filename>winbindd_idmap.tdb</filename> and <filename>winbindd_cache.tdb</filename> files.
256 <indexterm><primary>mapping</primary></indexterm>
257 The use of an LDAP backend for the Winbind IDMAP facility permits Windows domain SIDs
258 mappings to UIDs/GIDs to be stored centrally. The result is a consistent mapping across all domain member
259 servers so configured. This solves one of the major headaches for network administrators who need to copy
260 files between or across network file servers.
266 <title>Political Issues</title>
269 <indexterm><primary>OpenLDAP</primary></indexterm>
270 <indexterm><primary>NIS</primary></indexterm>
271 <indexterm><primary>yellow pages</primary><see>NIS</see></indexterm>
272 <indexterm><primary>identity management</primary></indexterm>
273 One of the most fierce conflicts recently being waged is resistance to the adoption of LDAP, in
274 particular OpenLDAP, as a replacement for UNIX NIS (previously called Yellow Pages). Let's face it, LDAP
275 is different and requires a new approach to the need for a better identity management solution. The more
276 you work with LDAP, the more its power and flexibility emerges from its dark, cavernous chasm.
280 LDAP is a most suitable solution for heterogenous environments. If you need crypto, add Kerberos.
281 The reason these are preferable is because they are heterogenous. Windows solutions of this sort are <emphasis>not</emphasis>
282 heterogenous by design. This is fundamental &smbmdash; it isn't religious or political. This also doesn't say that
283 you can't use Windows Active Directory in a heterogenous environment &smbmdash; it can be done, it just requires
284 commercial integration products. But it's not what Active Directory was designed for.
288 <indexterm><primary>directory</primary></indexterm>
289 <indexterm><primary>management</primary></indexterm>
290 A number of long-term UNIX devotees have recently commented in various communications that the Samba Team
291 is the first application group to almost force network administrators to use LDAP. It should be pointed
292 out that we resisted this for as long as we could. It is not out of laziness or malice that LDAP has
293 finally emerged as the preferred identity management backend for Samba. We recommend LDAP for your total
294 organizational directory needs.
302 <title>Implementation</title>
305 <indexterm><primary>Domain Member</primary><secondary>server</secondary></indexterm>
306 <indexterm><primary>Domain Member</primary><secondary>client</secondary></indexterm>
307 <indexterm><primary>Domain Controller</primary></indexterm>
308 The domain member server and the domain member client are at the center of focus in this chapter.
309 Configuration of Samba-3 domain controller is covered in earlier chapters, so if your
310 interest is in domain controller configuration, you will not find that here. You will find good
311 oil that helps you to add domain member servers and clients.
315 <indexterm><primary>Domain Member</primary><secondary>workstations</secondary></indexterm>
316 In practice, domain member servers and domain member workstations are very different entities, but in
317 terms of technology they share similar core infrastructure. A technologist would argue that servers
318 and workstations are identical. Many users would argue otherwise, given that in a well-disciplined
319 environment a workstation (client) is a device from which a user creates documents and files that
320 are located on servers. A workstation is frequently viewed as a disposable (easy to replace) item,
321 but a server is viewed as a core component of the business.
325 <indexterm><primary>workstation</primary></indexterm>
326 We can look at this another way. If a workstation breaks down, one user is affected, but if a
327 server breaks down, hundreds of users may not be able to work. The services that a workstation
328 must provide are document- and file-production oriented; a server provides information storage
329 and is distribution oriented.
333 <indexterm><primary>authentication process</primary></indexterm>
334 <indexterm><primary>logon process</primary></indexterm>
335 <indexterm><primary>user identities</primary></indexterm>
336 <emphasis>Why is this important?</emphasis> For starters, we must identify what
337 components of the operating system and its environment must be configured. Also, it is necessary
338 to recognize where the interdependencies between the various services to be used are.
339 In particular, it is important to understand the operation of each critical part of the
340 authentication process, the logon process, and how user identities get resolved and applied
341 within the operating system and applications (like Samba) that depend on this and may
342 actually contribute to it.
346 So, in this chapter we demonstrate how to implement the technology. It is done within a context of
347 what type of service need must be fulfilled.
350 <sect2 id="sdcsdmldap">
351 <title>Samba Domain with Samba Domain Member Server &smbmdash; Using NSS LDAP</title>
354 <indexterm><primary>ldapsam</primary></indexterm>
355 <indexterm><primary>ldapsam backend</primary></indexterm>
356 <indexterm><primary>IDMAP</primary></indexterm>
357 <indexterm><primary>mapping</primary><secondary>consistent</secondary></indexterm>
358 <indexterm><primary>winbindd</primary></indexterm>
359 <indexterm><primary>foreign SID</primary></indexterm>
360 In this example, it is assumed that you have Samba PDC/BDC servers. This means you are using
361 an LDAP ldapsam backend. We are adding to the LDAP backend database (directory)
362 containers for use by the IDMAP facility. This makes it possible to have globally consistent
363 mapping of SIDs to and from UIDs and GIDs. This means that it is necessary to run
364 <command>winbindd</command> as part of your configuration. The primary purpose of running
365 <command>winbindd</command> (within this operational context) is to permit mapping of foreign
366 SIDs (those not originating from the the local Samba server). Foreign SIDs can come from any
367 domain member client or server, or from Windows clients that do not belong to a domain. Another
368 way to explain the necessity to run <command>winbindd</command> is that Samba can locally
369 resolve only accounts that belong to the security context of its own machine SID. Winbind
370 handles all non-local SIDs and maps them to a local UID/GID value. The UID and GID are allocated
371 from the parameter values set in the &smb.conf; file for the <parameter>idmap uid</parameter> and
372 <parameter>idmap gid</parameter> ranges. Where LDAP is used, the mappings can be stored in LDAP
373 so that all domain member servers can use a consistent mapping.
377 <indexterm><primary>winbindd</primary></indexterm>
378 <indexterm><primary>getpwnam</primary></indexterm>
379 <indexterm><primary>NSS</primary></indexterm>
380 If your installation is accessed only from clients that are members of your own domain, and all
381 user accounts are present in a local passdb backend then it is not necessary to run
382 <command>winbindd</command>. The local passdb backend can be in smbpasswd, tdbsam, or in ldapsam.
386 It is possible to use a local passdb backend with any convenient means of resolving the POSIX
387 user and group account information. The POSIX information is usually obtained using the
388 <command>getpwnam()</command> system call. On NSS-enabled systems, the actual POSIX account
389 source can be provided from
394 <indexterm><primary>/etc/passwd</primary></indexterm>
395 <indexterm><primary>/etc/group</primary></indexterm>
396 Accounts in <filename>/etc/passwd</filename> or in <filename>/etc/group</filename>.
400 <indexterm><primary>NSS</primary></indexterm>
401 <indexterm><primary>compat</primary></indexterm>
402 <indexterm><primary>ldap</primary></indexterm>
403 <indexterm><primary>nis</primary></indexterm>
404 <indexterm><primary>nisplus</primary></indexterm>
405 <indexterm><primary>hesiod</primary></indexterm>
406 <indexterm><primary>ldap</primary></indexterm>
407 <indexterm><primary>nss_ldap</primary></indexterm>
408 <indexterm><primary>PADL Software</primary></indexterm>
409 Resolution via NSS. On NSS-enabled systems, there is usually a facility to resolve IDs
410 via multiple methods. The methods typically include <command>files</command>,
411 <command>compat</command>, <command>db</command>, <command>ldap</command>,
412 <command>nis</command>, <command>nisplus</command>, <command>hesiod.</command> When
413 correctly installed, Samba adds to this list the <command>winbindd</command> facility.
414 The ldap facility is frequently the nss_ldap tool provided by PADL Software.
419 To advoid confusion the use of the term <literal>local passdb backend</literal> means that
420 the user account backend is not shared by any other Samba server &smbmdash; instead, it is
421 used only locally on the Samba domain member server under discussion.
425 <indexterm><primary>Identity resolution</primary></indexterm>
426 The diagram in <link linkend="ch9-sambadc"/> demonstrates the relationship of Samba and system
427 components that are involved in the identity resolution process where Samba is used as a domain
428 member server within a Samba domain control network.
431 <figure id="ch9-sambadc">
432 <title>Samba Domain: Samba Member Server</title>
433 <imagefile scale="60">chap9-SambaDC</imagefile>
437 <indexterm><primary>IDMAP</primary></indexterm>
438 <indexterm><primary>foreign</primary></indexterm>
439 In this example configuration, Samba will directly search the LDAP-based passwd backend ldapsam
440 to obtain authentication and user identity information. The IDMAP information is stored in the LDAP
441 backend so that it can be shared by all domain member servers so that every user will have a
442 consistent UID and GID across all of them. The IDMAP facility will be used for all foreign
443 (i.e., not having the same SID as the domain it is a member of) domains. The configuration of
444 NSS will ensure that all UNIX processes will obtain a consistent UID/GID.
448 The instructions given here apply to the Samba environment shown in <link linkend="happy"/> and <link linkend="2000users"/>.
449 If the network does not have an LDAP slave server (i.e., <link linkend="happy"/> configuration),
450 change the target LDAP server from <constant>lapdc</constant> to <constant>massive.</constant>
454 <title>Configuration of NSS_LDAP-Based Identity Resolution</title>
457 Create the &smb.conf; file as shown in <link linkend="ch9-sdmsdc"/>. Locate
458 this file in the directory <filename>/etc/samba</filename>.
462 <indexterm><primary>ldap.conf</primary></indexterm>
463 Configure the file that will be used by <constant>nss_ldap</constant> to
464 locate and communicate with the LDAP server. This file is called <filename>ldap.conf</filename>.
465 If your implementation of <constant>nss_ldap</constant> is consistent with
466 the defaults suggested by PADL (the authors), it will be located in the
467 <filename>/etc</filename> directory. On some systems, the default location is
468 the <filename>/etc/openldap</filename> directory, however this file is intended
469 for use by the OpenLDAP utilities and should not really be used by the nss_ldap
470 utility since its content and structure serves the specific purpose of enabling
471 the resolution of user and group IDs via NSS.
475 Change the parameters inside the file that is located on your OS so it matches
476 <link linkend="ch9-sdmlcnf"/>. To find the correct location of this file, you
477 can obtain this from the library that will be used by executing the following:
479 &rootprompt; strings /lib/libnss_ldap* | grep ldap.conf
485 Configure the NSS control file so it matches the one shown in
486 <link linkend="ch9-sdmnss"/>.
490 <indexterm><primary>Identity resolution</primary></indexterm>
491 <indexterm><primary>getent</primary></indexterm>
492 Before proceeding to configure Samba, validate the operation of the NSS identity
493 resolution via LDAP by executing:
495 &rootprompt; getent passwd
497 root:x:0:512:Netbios Domain Administrator:/root:/bin/false
498 nobody:x:999:514:nobody:/dev/null:/bin/false
499 bobj:x:1000:513:Robert Jordan:/home/bobj:/bin/bash
500 stans:x:1001:513:Stanley Soroka:/home/stans:/bin/bash
501 chrisr:x:1002:513:Christine Roberson:/home/chrisr:/bin/bash
502 maryv:x:1003:513:Mary Vortexis:/home/maryv:/bin/bash
503 jht:x:1004:513:John H Terpstra:/home/jht:/bin/bash
504 bldg1$:x:1006:553:bldg1$:/dev/null:/bin/false
505 temptation$:x:1009:553:temptation$:/dev/null:/bin/false
506 vaioboss$:x:1005:553:vaioboss$:/dev/null:/bin/false
507 fran$:x:1008:553:fran$:/dev/null:/bin/false
508 josephj:x:1007:513:Joseph James:/home/josephj:/bin/bash
510 You should notice the location of the users' home directories. First, make certain that
511 the home directories exist on the domain member server; otherwise, the home directory
512 share is not available. The home directories could be mounted off a domain controller
513 using NFS or by any other suitable means. Second, the absence of the domain name in the
514 home directory path is indicative that identity resolution is not being done via winbind.
516 &rootprompt; getent group
518 Domain Admins:x:512:root,jht
519 Domain Users:x:513:bobj,stans,chrisr,maryv,jht,josephj
526 <indexterm><primary>secondary group</primary></indexterm>
527 <indexterm><primary>primary group</primary></indexterm>
528 <indexterm><primary>group membership</primary></indexterm>
529 This shows that all is working as it should be. Notice that in the LDAP database
530 the users' primary and secondary group memberships are identical. It is not
531 necessary to add secondary group memberships (in the group database) if the
532 user is already a member via primary group membership in the password database.
533 When using winbind, it is in fact undesirable to do this because it results in
534 doubling up of group memberships and may cause problems with winbind under certain
535 conditions. It is intended that these limitations with winbind will be resolved soon
536 after Samba-3.0.20 has been released.
540 <indexterm><primary>slapcat</primary></indexterm>
541 The LDAP directory must have a container object for IDMAP data. There are several ways you can
542 check that your LDAP database is able to receive IDMAP information. One of the simplest is to
545 &rootprompt; slapcat | grep -i idmap
546 dn: ou=Idmap,dc=abmas,dc=biz
549 <indexterm><primary>ldapadd</primary></indexterm>
550 If the execution of this command does not return IDMAP entries, you need to create an LDIF
551 template file (see <link linkend="ch9-ldifadd"/>). You can add the required entries using
552 the following command:
554 &rootprompt; ldapadd -x -D "cn=Manager,dc=abmas,dc=biz" \
555 -w not24get < /etc/openldap/idmap.LDIF
560 Samba automatically populates the LDAP directory container when it needs to. To permit Samba
561 write access to the LDAP directory it is necessary to set the LDAP administrative password
562 in the <filename>secrets.tdb</filename> file as shown here:
564 &rootprompt; smbpasswd -w not24get
569 <indexterm><primary>net</primary><secondary>rpc</secondary><tertiary>join</tertiary></indexterm>
570 <indexterm><primary>Domain join</primary></indexterm>
571 The system is ready to join the domain. Execute the following:
573 &rootprompt; net rpc join -U root%not24get
574 Joined domain MEGANET2.
576 This indicates that the domain join succeeded.
580 Failure to join the domain could be caused by any number of variables. The most common
581 causes of failure to join are:
586 <listitem><para>Broken resolution of NetBIOS names to the respective IP address.</para></listitem>
587 <listitem><para>Incorrect username and password credentials.</para></listitem>
588 <listitem><para>The NT4 <parameter>restrict anonymous</parameter> is set to exclude anonymous
589 connections.</para></listitem>
594 The connection setup can be diagnosed by executing:
596 &rootprompt; net rpc join -S 'pdc-name' -U administrator%password -d 5
598 <indexterm><primary>failed</primary></indexterm>
599 <indexterm><primary>failed join</primary></indexterm>
600 <indexterm><primary>rejected</primary></indexterm>
601 <indexterm><primary>restrict anonymous</primary></indexterm>
602 Note: Use "root" for UNIX/Linux and Samba, use "Administrator" for Windows NT4/200X. If the cause of
603 the failure appears to be related to a rejected or failed NT_SESSION_SETUP* or an error message that
604 says NT_STATUS_ACCESS_DENIED immediately check the Windows registry setting that controls the
605 <constant>restrict anonymous</constant> setting. Set this to the value 0 so that an anonymous connection
606 can be sustained, then try again.
610 It is possible (perhaps even recommended) to use the following to validate the ability to connect
613 &rootprompt; net rpc info -S 'pdc-name' -U Administrator%not24get
614 Domain Name: MEGANET2
615 Domain SID: S-1-5-21-422319763-4138913805-7168186429
616 Sequence number: 1519909596
618 Num domain groups: 821
621 &rootprompt; net rpc testjoin -S 'pdc-name' -U Administrator%not24get
622 Join to 'MEGANET2' is OK
624 If for any reason the following response is obtained to the last command above,it is time to
625 call in the Networking Super-Snooper task force (i.e., start debugging):
627 NT_STATUS_ACCESS_DENIED
628 Join to 'MEGANET2' failed.
633 <indexterm><primary>wbinfo</primary></indexterm>
634 Just joining the domain is not quite enough; you must now provide a privileged set
635 of credentials through which <command>winbindd</command> can interact with the
636 domain servers. Execute the following to implant the necessary credentials:
638 &rootprompt; wbinfo --set-auth-user=Administrator%not24get
640 The configuration is now ready to obtain the Samba domain user and group information.
644 You may now start Samba in the usual manner, and your Samba domain member server
645 is ready for use. Just add shares as required.
650 <example id="ch9-sdmsdc">
651 <title>Samba Domain Member in Samba Domain Using LDAP &smbmdash; &smb.conf; File</title>
653 <smbconfcomment>Global parameters</smbconfcomment>
654 <smbconfsection name="[global]"/>
655 <smbconfoption name="unix charset">LOCALE</smbconfoption>
656 <smbconfoption name="workgroup">MEGANET2</smbconfoption>
657 <smbconfoption name="security">DOMAIN</smbconfoption>
658 <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
659 <smbconfoption name="log level">10</smbconfoption>
660 <smbconfoption name="syslog">0</smbconfoption>
661 <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
662 <smbconfoption name="max log size">50</smbconfoption>
663 <smbconfoption name="smb ports">139</smbconfoption>
664 <smbconfoption name="name resolve order">wins bcast hosts</smbconfoption>
665 <smbconfoption name="printcap name">CUPS</smbconfoption>
666 <smbconfoption name="wins server">192.168.2.1</smbconfoption>
667 <smbconfoption name="ldap suffix">dc=abmas,dc=biz</smbconfoption>
668 <smbconfoption name="ldap machine suffix">ou=People</smbconfoption>
669 <smbconfoption name="ldap user suffix">ou=People</smbconfoption>
670 <smbconfoption name="ldap group suffix">ou=Groups</smbconfoption>
671 <smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
672 <smbconfoption name="ldap admin dn">cn=Manager,dc=abmas,dc=biz</smbconfoption>
673 <smbconfoption name="idmap backend">ldap:ldap://lapdc.abmas.biz</smbconfoption>
674 <smbconfoption name="idmap uid">10000-20000</smbconfoption>
675 <smbconfoption name="idmap gid">10000-20000</smbconfoption>
676 <smbconfoption name="winbind trusted domains only">Yes</smbconfoption>
677 <smbconfoption name="printer admin">root</smbconfoption>
678 <smbconfoption name="printing">cups</smbconfoption>
680 <smbconfsection name="[homes]"/>
681 <smbconfoption name="comment">Home Directories</smbconfoption>
682 <smbconfoption name="valid users">%S</smbconfoption>
683 <smbconfoption name="read only">No</smbconfoption>
684 <smbconfoption name="browseable">No</smbconfoption>
686 <smbconfsection name="[printers]"/>
687 <smbconfoption name="comment">SMB Print Spool</smbconfoption>
688 <smbconfoption name="path">/var/spool/samba</smbconfoption>
689 <smbconfoption name="guest ok">Yes</smbconfoption>
690 <smbconfoption name="printable">Yes</smbconfoption>
691 <smbconfoption name="browseable">No</smbconfoption>
693 <smbconfsection name="[print$]"/>
694 <smbconfoption name="comment">Printer Drivers</smbconfoption>
695 <smbconfoption name="path">/var/lib/samba/drivers</smbconfoption>
696 <smbconfoption name="admin users">root, Administrator</smbconfoption>
697 <smbconfoption name="write list">root</smbconfoption>
701 <example id="ch9-ldifadd">
702 <title>LDIF IDMAP Add-On Load File &smbmdash; File: /etc/openldap/idmap.LDIF</title>
704 dn: ou=Idmap,dc=abmas,dc=biz
705 objectClass: organizationalUnit
707 structuralObjectClass: organizationalUnit
711 <example id="ch9-sdmlcnf">
712 <title>Configuration File for NSS LDAP Support &smbmdash; <filename>/etc/ldap.conf</filename></title>
714 URI ldap://massive.abmas.biz ldap://massive.abmas.biz:636
717 binddn cn=Manager,dc=abmas,dc=biz
722 nss_base_passwd ou=People,dc=abmas,dc=biz?one
723 nss_base_shadow ou=People,dc=abmas,dc=biz?one
724 nss_base_group ou=Groups,dc=abmas,dc=biz?one
729 <example id="ch9-sdmnss">
730 <title>NSS using LDAP for Identity Resolution &smbmdash; File: <filename>/etc/nsswitch.conf</filename></title>
736 hosts: files dns wins
756 <title>NT4/Samba Domain with Samba Domain Member Server: Using NSS and Winbind</title>
759 You need to use this method for creating a Samba domain member server if any of the following conditions
765 LDAP support (client) is not installed on the system.
769 There are mitigating circumstances forcing a decision not to use LDAP.
773 The Samba domain member server must be part of a Windows NT4 Domain, or a Samba Domain.
778 <indexterm><primary>Windows ADS Domain</primary></indexterm>
779 <indexterm><primary>Samba Domain</primary></indexterm>
780 <indexterm><primary>LDAP</primary></indexterm>
781 Later in the chapter, you can see how to configure a Samba domain member server for a Windows ADS domain.
782 Right now your objective is to configure a Samba server that can be a member of a Windows NT4-style
783 domain and/or does not use LDAP.
787 <indexterm><primary>duplicate accounts</primary></indexterm>
788 If you use <command>winbind</command> for identity resolution, make sure that there are no
793 <indexterm><primary>/etc/passwd</primary></indexterm>
794 For example, do not have more than one account that has UID=0 in the password database. If there
795 is an account called <constant>root</constant> in the <filename>/etc/passwd</filename> database,
796 it is okay to have an account called <constant>root</constant> in the LDAP ldapsam or in the
797 tdbsam. But if there are two accounts in the passdb backend that have the same UID, winbind will
798 break. This means that the <constant>Administrator</constant> account must be called
799 <constant>root</constant>.
803 <indexterm><primary>/etc/passwd</primary></indexterm>
804 <indexterm><primary>ldapsam</primary></indexterm>
805 <indexterm><primary>tdbsam</primary></indexterm>
806 Winbind will break if there is an account in <filename>/etc/passwd</filename> that has
807 the same UID as an account that is in LDAP ldapsam (or in tdbsam) but that differs in name only.
811 <indexterm><primary>credentials</primary></indexterm>
812 <indexterm><primary>traverse</primary></indexterm>
813 <indexterm><primary>wide-area</primary></indexterm>
814 <indexterm><primary>network</primary><secondary>wide-area</secondary></indexterm>
815 <indexterm><primary>tdbdump</primary></indexterm>
816 The following configuration uses CIFS/SMB protocols alone to obtain user and group credentials.
817 The winbind information is locally cached in the <filename>winbindd_cache.tdb winbindd_idmap.tdb</filename>
818 files. This provides considerable performance benefits compared with the LDAP solution, particularly
819 where the LDAP lookups must traverse WAN links. You may examine the contents of these
820 files using the tool <command>tdbdump</command>, though you may have to build this from the Samba
821 source code if it has not been supplied as part of a binary package distribution that you may be using.
825 <title>Configuration of Winbind-Based Identity Resolution</title>
828 Using your favorite text editor, create the &smb.conf; file so it has the contents
829 shown in <link linkend="ch0-NT4DSDM"/>.
833 <indexterm><primary>/etc/nsswitch.conf</primary></indexterm>
834 Edit the <filename>/etc/nsswitch.conf</filename> so it has the entries shown in
835 <link linkend="ch9-sdmnss"/>.
839 <indexterm><primary>net</primary><secondary>rpc</secondary><tertiary>join</tertiary></indexterm>
840 The system is ready to join the domain. Execute the following:
842 net rpc join -U root%not2g4et
843 Joined domain MEGANET2.
845 This indicates that the domain join succeed.
850 <indexterm><primary>winbind</primary></indexterm>
851 <indexterm><primary>wbinfo</primary></indexterm>
852 Validate operation of <command>winbind</command> using the <command>wbinfo</command>
855 &rootprompt; wbinfo -u
866 This shows that domain users have been listed correctly.
868 &rootprompt; wbinfo -g
869 MEGANET2+Domain Admins
870 MEGANET2+Domain Users
871 MEGANET2+Domain Guests
876 This shows that domain groups have been correctly obtained also.
880 <indexterm><primary>NSS</primary></indexterm>
881 <indexterm><primary>getent</primary></indexterm>
882 <indexterm><primary>winbind</primary></indexterm>
883 The next step verifies that NSS is able to obtain this information
884 correctly from <command>winbind</command> also.
886 &rootprompt; getent passwd
888 MEGANET2+root:x:10000:10001:NetBIOS Domain Admin:
889 /home/MEGANET2/root:/bin/bash
890 MEGANET2+nobody:x:10001:10001:nobody:
891 /home/MEGANET2/nobody:/bin/bash
892 MEGANET2+jht:x:10002:10001:John H Terpstra:
893 /home/MEGANET2/jht:/bin/bash
894 MEGANET2+maryv:x:10003:10001:Mary Vortexis:
895 /home/MEGANET2/maryv:/bin/bash
896 MEGANET2+billr:x:10004:10001:William Randalph:
897 /home/MEGANET2/billr:/bin/bash
898 MEGANET2+jelliott:x:10005:10001:John G Elliott:
899 /home/MEGANET2/jelliott:/bin/bash
900 MEGANET2+dbrady:x:10006:10001:Darren Brady:
901 /home/MEGANET2/dbrady:/bin/bash
902 MEGANET2+joeg:x:10007:10001:Joe Green:
903 /home/MEGANET2/joeg:/bin/bash
904 MEGANET2+balap:x:10008:10001:Bala Pillay:
905 /home/MEGANET2/balap:/bin/bash
907 The user account information has been correctly obtained. This information has
908 been merged with the winbind template information configured in the &smb.conf; file.
910 &rootprompt;# getent group
912 MEGANET2+Domain Admins:x:10000:MEGANET2+root,MEGANET2+jht
913 MEGANET2+Domain Users:x:10001:MEGANET2+jht,MEGANET2+maryv,\
914 MEGANET2+billr,MEGANET2+jelliott,MEGANET2+dbrady,\
915 MEGANET2+joeg,MEGANET2+balap
916 MEGANET2+Domain Guests:x:10002:MEGANET2+nobody
917 MEGANET2+Accounts:x:10003:
918 MEGANET2+Finances:x:10004:
919 MEGANET2+PIOps:x:10005:
924 The Samba member server of a Windows NT4 domain is ready for use.
929 <example id="ch0-NT4DSDM">
930 <title>Samba Domain Member Server Using Winbind &smb.conf; File for NT4 Domain</title>
932 <smbconfcomment>Global parameters</smbconfcomment>
933 <smbconfsection name="[global]"/>
934 <smbconfoption name="unix charset">LOCALE</smbconfoption>
935 <smbconfoption name="workgroup">MEGANET2</smbconfoption>
936 <smbconfoption name="security">DOMAIN</smbconfoption>
937 <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
938 <smbconfoption name="log level">1</smbconfoption>
939 <smbconfoption name="syslog">0</smbconfoption>
940 <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
941 <smbconfoption name="max log size">0</smbconfoption>
942 <smbconfoption name="smb ports">139</smbconfoption>
943 <smbconfoption name="name resolve order">wins bcast hosts</smbconfoption>
944 <smbconfoption name="printcap name">CUPS</smbconfoption>
945 <smbconfoption name="wins server">192.168.2.1</smbconfoption>
946 <smbconfoption name="idmap uid">10000-20000</smbconfoption>
947 <smbconfoption name="idmap gid">10000-20000</smbconfoption>
948 <smbconfoption name="template primary group">"Domain Users"</smbconfoption>
949 <smbconfoption name="template shell">/bin/bash</smbconfoption>
950 <smbconfoption name="winbind separator">+</smbconfoption>
951 <smbconfoption name="printer admin">root</smbconfoption>
952 <smbconfoption name="hosts allow">192.168.2., 192.168.3., 127.</smbconfoption>
953 <smbconfoption name="printing">cups</smbconfoption>
955 <smbconfsection name="[homes]"/>
956 <smbconfoption name="comment">Home Directories</smbconfoption>
957 <smbconfoption name="valid users">%S</smbconfoption>
958 <smbconfoption name="read only">No</smbconfoption>
959 <smbconfoption name="browseable">No</smbconfoption>
961 <smbconfsection name="[printers]"/>
962 <smbconfoption name="comment">SMB Print Spool</smbconfoption>
963 <smbconfoption name="path">/var/spool/samba</smbconfoption>
964 <smbconfoption name="guest ok">Yes</smbconfoption>
965 <smbconfoption name="printable">Yes</smbconfoption>
966 <smbconfoption name="browseable">No</smbconfoption>
968 <smbconfsection name="[print$]"/>
969 <smbconfoption name="comment">Printer Drivers</smbconfoption>
970 <smbconfoption name="path">/var/lib/samba/drivers</smbconfoption>
971 <smbconfoption name="admin users">root, Administrator</smbconfoption>
972 <smbconfoption name="write list">root</smbconfoption>
979 <title>NT4/Samba Domain with Samba Domain Member Server without NSS Support</title>
982 No matter how many UNIX/Linux administrators there may be who believe that a UNIX operating
983 system that does not have NSS and PAM support to be outdated, the fact is there
984 are still many such systems in use today. Samba can be used without NSS support, but this
985 does limit it to the use of local user and group accounts only.
989 The following steps may be followed to implement Samba with support for local accounts.
990 In this configuration Samba is made a domain member server. All incoming connections
991 to the Samba server will cause the look-up of the incoming username. If the account
992 is found, it is used. If the account is not found, one will be automatically created
993 on the local machine so that it can then be used for all access controls.
997 <title>Configuration Using Local Accounts Only</title>
1000 Using your favorite text editor, create the &smb.conf; file so it has the contents
1001 shown in <link linkend="ch0-NT4DSCM"/>.
1005 <para><indexterm><primary>net</primary><secondary>rpc</secondary><tertiary>join</tertiary></indexterm>
1006 The system is ready to join the domain. Execute the following:
1008 net rpc join -U root%not24get
1009 Joined domain MEGANET2.
1011 This indicates that the domain join succeed.
1015 Be sure to run all three Samba daemons: <command>smbd</command>, <command>nmbd</command>, <command>winbindd</command>.
1019 The Samba member server of a Windows NT4 domain is ready for use.
1023 <example id="ch0-NT4DSCM">
1024 <title>Samba Domain Member Server Using Local Accounts &smb.conf; File for NT4 Domain</title>
1026 <smbconfcomment>Global parameters</smbconfcomment>
1027 <smbconfsection name="[global]"/>
1028 <smbconfoption name="unix charset">LOCALE</smbconfoption>
1029 <smbconfoption name="workgroup">MEGANET3</smbconfoption>
1030 <smbconfoption name="netbios name">BSDBOX</smbconfoption>
1031 <smbconfoption name="security">DOMAIN</smbconfoption>
1032 <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
1033 <smbconfoption name="log level">1</smbconfoption>
1034 <smbconfoption name="syslog">0</smbconfoption>
1035 <smbconfoption name="add user script">/usr/sbin/useradd -m '%u'</smbconfoption>
1036 <smbconfoption name="add machine script">/usr/sbin/useradd -M '%u'</smbconfoption>
1037 <smbconfoption name="add group script">/usr/sbin/groupadd '%g'</smbconfoption>
1038 <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
1039 <smbconfoption name="max log size">0</smbconfoption>
1040 <smbconfoption name="smb ports">139</smbconfoption>
1041 <smbconfoption name="name resolve order">wins bcast hosts</smbconfoption>
1042 <smbconfoption name="printcap name">CUPS</smbconfoption>
1043 <smbconfoption name="wins server">192.168.2.1</smbconfoption>
1044 <smbconfoption name="printer admin">root</smbconfoption>
1045 <smbconfoption name="hosts allow">192.168.2., 192.168.3., 127.</smbconfoption>
1046 <smbconfoption name="printing">cups</smbconfoption>
1048 <smbconfsection name="[homes]"/>
1049 <smbconfoption name="comment">Home Directories</smbconfoption>
1050 <smbconfoption name="valid users">%S</smbconfoption>
1051 <smbconfoption name="read only">No</smbconfoption>
1052 <smbconfoption name="browseable">No</smbconfoption>
1054 <smbconfsection name="[printers]"/>
1055 <smbconfoption name="comment">SMB Print Spool</smbconfoption>
1056 <smbconfoption name="path">/var/spool/samba</smbconfoption>
1057 <smbconfoption name="guest ok">Yes</smbconfoption>
1058 <smbconfoption name="printable">Yes</smbconfoption>
1059 <smbconfoption name="browseable">No</smbconfoption>
1061 <smbconfsection name="[print$]"/>
1062 <smbconfoption name="comment">Printer Drivers</smbconfoption>
1063 <smbconfoption name="path">/var/lib/samba/drivers</smbconfoption>
1064 <smbconfoption name="admin users">root, Administrator</smbconfoption>
1065 <smbconfoption name="write list">root</smbconfoption>
1071 <title>Active Directory Domain with Samba Domain Member Server</title>
1074 <indexterm><primary>Active Directory</primary><secondary>join</secondary></indexterm>
1075 <indexterm><primary>Kerberos</primary></indexterm>
1076 <indexterm><primary>Domain Member</primary><secondary>server</secondary></indexterm>
1077 One of the much-sought-after features new to Samba-3 is the ability to join an Active Directory
1078 domain using Kerberos protocols. This makes it possible to operate an entire Windows network
1079 without the need to run NetBIOS over TCP/IP and permits more secure networking in general. An
1080 exhaustively complete discussion of the protocols is not possible in this book; perhaps a
1081 later book may explore the intricacies of the NetBIOS-less operation that Samba-3 can participate
1082 in. For now, we simply focus on how a Samba-3 server can be made a domain member server.
1086 <indexterm><primary>Active Directory</primary></indexterm>
1087 <indexterm><primary>LDAP</primary></indexterm>
1088 <indexterm><primary>Identity resolution</primary></indexterm>
1089 <indexterm><primary>Kerberos</primary></indexterm>
1090 The diagram in <link linkend="ch9-adsdc"/> demonstrates how Samba-3 interfaces with
1091 Microsoft Active Directory components. It should be noted that if Microsoft Windows Services
1092 for UNIX (SFU) has been installed and correctly configured, it is possible to use client LDAP
1093 for identity resolution just as can be done with Samba-3 when using an LDAP passdb backend.
1094 The UNIX tool that you need for this, as in the case of LDAP on UNIX/Linux, is the PADL
1095 Software nss_ldap tool-set. Compared with use of winbind and Kerberos, the use of
1096 LDAP-based identity resolution is a little less secure. In view of the fact that this solution
1097 requires additional software to be installed on the Windows 200x ADS domain controllers,
1098 and that means more management overhead, it is likely that most Samba-3 ADS client sites
1099 may elect to use winbind.
1103 Do not attempt to use this procedure if you are not 100 percent certain that the build of Samba-3
1104 you are using has been compiled and linked with all the tools necessary for this to work.
1105 Given the importance of this step, you must first validate that the Samba-3 message block
1106 daemon (<command>smbd</command>) has the necessary features.
1110 The hypothetical domain you are using in this example assumes that the Abmas London office
1111 decided to take its own lead (some would say this is a typical behavior in a global
1112 corporate world; besides, a little divergence and conflict makes for an interesting life).
1113 The Windows Server 2003 ADS domain is called <constant>london.abmas.biz</constant> and the
1114 name of the server is <constant>W2K3S</constant>. In ADS realm terms, the domain controller
1115 is known as <constant>w2k3s.london.abmas.biz</constant>. In NetBIOS nomenclature, the
1116 domain name is <constant>LONDON</constant> and the server name is <constant>W2K3S</constant>.
1119 <figure id="ch9-adsdc">
1120 <title>Active Directory Domain: Samba Member Server</title>
1121 <imagefile scale="60">chap9-ADSDC</imagefile>
1125 <title>Joining a Samba Server as an ADS Domain Member</title>
1128 <indexterm><primary>smbd</primary></indexterm>
1129 Before you try to use Samba-3, you want to know for certain that your executables have
1130 support for Kerberos and for LDAP. Execute the following to identify whether or
1131 not this build is perhaps suitable for use:
1133 &rootprompt; cd /usr/sbin
1134 &rootprompt; smbd -b | grep KRB
1136 HAVE_ADDR_TYPE_IN_KRB5_ADDRESS
1138 HAVE_KRB5_AUTH_CON_SETKEY
1139 HAVE_KRB5_GET_DEFAULT_IN_TKT_ETYPES
1140 HAVE_KRB5_GET_PW_SALT
1141 HAVE_KRB5_KEYBLOCK_KEYVALUE
1142 HAVE_KRB5_KEYTAB_ENTRY_KEYBLOCK
1143 HAVE_KRB5_MK_REQ_EXTENDED
1144 HAVE_KRB5_PRINCIPAL_GET_COMP_STRING
1145 HAVE_KRB5_SET_DEFAULT_IN_TKT_ETYPES
1146 HAVE_KRB5_STRING_TO_KEY
1147 HAVE_KRB5_STRING_TO_KEY_SALT
1150 This output was obtained on a SUSE Linux system and shows the output for
1151 Samba that has been compiled and linked with the Heimdal Kerberos libraries.
1152 The following is a typical output that will be found on a Red Hat Linux system that
1153 has been linked with the MIT Kerberos libraries:
1155 &rootprompt; cd /usr/sbin
1156 &rootprompt; smbd -b | grep KRB
1158 HAVE_ADDRTYPE_IN_KRB5_ADDRESS
1160 HAVE_KRB5_AUTH_CON_SETUSERUSERKEY
1161 HAVE_KRB5_ENCRYPT_DATA
1162 HAVE_KRB5_FREE_DATA_CONTENTS
1163 HAVE_KRB5_FREE_KTYPES
1164 HAVE_KRB5_GET_PERMITTED_ENCTYPES
1165 HAVE_KRB5_KEYTAB_ENTRY_KEY
1166 HAVE_KRB5_LOCATE_KDC
1167 HAVE_KRB5_MK_REQ_EXTENDED
1168 HAVE_KRB5_PRINCIPAL2SALT
1169 HAVE_KRB5_PRINC_COMPONENT
1170 HAVE_KRB5_SET_DEFAULT_TGS_KTYPES
1171 HAVE_KRB5_SET_REAL_TIME
1172 HAVE_KRB5_STRING_TO_KEY
1173 HAVE_KRB5_TKT_ENC_PART2
1174 HAVE_KRB5_USE_ENCTYPE
1178 You can validate that Samba has been compiled and linked with LDAP support
1181 &rootprompt; smbd -b | grep LDAP
1182 massive:/usr/sbin # smbd -b | grep LDAP
1185 HAVE_LDAP_DOMAIN2HOSTLIST
1187 HAVE_LDAP_INITIALIZE
1188 HAVE_LDAP_SET_REBIND_PROC
1190 LDAP_SET_REBIND_PROC_ARGS
1192 This does look promising; <command>smbd</command> has been built with Kerberos and LDAP
1193 support. You are relieved to know that it is safe to progress.
1197 <indexterm><primary>Kerberos</primary><secondary>libraries</secondary></indexterm>
1198 <indexterm><primary>MIT Kerberos</primary></indexterm>
1199 <indexterm><primary>Heimdal Kerberos</primary></indexterm>
1200 <indexterm><primary>Kerberos</primary><secondary>MIT</secondary></indexterm>
1201 <indexterm><primary>Kerberos</primary><secondary>Heimdal</secondary></indexterm>
1202 <indexterm><primary>Red Hat Linux</primary></indexterm>
1203 <indexterm><primary>SUSE Linux</primary></indexterm>
1204 <indexterm><primary>SerNet</primary></indexterm>
1205 <indexterm><primary>validated</primary></indexterm>
1206 The next step is to identify which version of the Kerberos libraries have been used.
1207 In order to permit Samba-3 to interoperate with Windows 2003 Active Directory, it is
1208 essential that it has been linked with either MIT Kerberos version 1.3.1 or later,
1209 or that it has been linked with Heimdal Kerberos 0.6 plus specific patches. You may
1210 identify what version of the MIT Kerberos libraries are installed on your system by
1211 executing (on Red Hat Linux):
1213 &rootprompt; rpm -q krb5
1215 Or on SUSE Linux, execute:
1217 &rootprompt; rpm -q heimdal
1219 Please note that the RPMs provided by the Samba-Team are known to be working and have
1220 been validated. Red Hat Linux RPMs may be obtained from the Samba FTP sites. SUSE
1221 Linux RPMs may be obtained from <ulink url="ftp://ftp.sernet.de">Sernet</ulink> in
1226 From this point on, you are certain that the Samba-3 build you are using has the
1227 necessary capabilities. You can now configure Samba-3 and the NSS.
1231 Using you favorite editor, configure the &smb.conf; file that is located in the
1232 <filename>/etc/samba</filename> directory so that it has the contents shown
1233 in <link linkend="ch9-adssdm"/>.
1237 Edit or create the NSS control file so it has the contents shown in <link linkend="ch9-sdmnss"/>.
1241 <indexterm><primary>/etc/samba/secrets.tdb</primary></indexterm>
1242 Delete the file <filename>/etc/samba/secrets.tdb</filename> if it exists. Of course, you
1243 do keep a backup, don't you?
1247 Delete the tdb files that cache Samba information. You keep a backup of the old
1248 files, of course. You also remove all files to ensure that nothing can pollute your
1249 nice, new configuration. Execute the following (example is for SUSE Linux):
1251 &rootprompt; rm /var/lib/samba/*tdb
1256 <indexterm><primary>testparm</primary></indexterm>
1257 Validate your &smb.conf; file using <command>testparm</command> (as you have
1258 done previously). Correct all errors reported before proceeding. The command you
1261 &rootprompt; testparm -s | less
1263 Now that you are satisfied that your Samba server is ready to join the Windows
1264 ADS domain, let's move on.
1268 <indexterm><primary>net</primary><secondary>ads</secondary><tertiary>join</tertiary></indexterm>
1269 <indexterm><primary>Kerberos</primary></indexterm>
1270 This is a good time to double-check everything and then execute the following
1271 command when everything you have done has checked out okay:
1273 &rootprompt; net ads join -UAdministrator%not24get
1274 Using short domain name -- LONDON
1275 Joined 'FRAN' to realm 'LONDON.ABMAS.BIZ'
1277 You have successfully made your Samba-3 server a member of the ADS domain
1278 using Kerberos protocols.
1282 <indexterm><primary>silent return</primary></indexterm>
1283 <indexterm><primary>failed join</primary></indexterm>
1284 In the event that you receive no output messages, a silent return means that the
1285 domain join failed. You should use <command>ethereal</command> to identify what
1286 may be failing. Common causes of a failed join include:
1290 <indexterm><primary>name resolution</primary><secondary>Defective</secondary></indexterm>
1291 Defective or misconfigured DNS name resolution.
1295 <indexterm><primary>Restrictive security</primary></indexterm>
1296 Restrictive security settings on the Windows 200x ADS domain controller
1297 preventing needed communications protocols. You can check this by searching
1298 the Windows Server 200x Event Viewer.
1302 Incorrectly configured &smb.conf; file settings.
1306 Lack of support of necessary Kerberos protocols because the version of MIT
1307 Kerberos (or Heimdal) in use is not up to date enough to support the necessary
1312 <indexterm><primary>net</primary><secondary>rpc</secondary><tertiary>join</tertiary></indexterm>
1313 <indexterm><primary>RPC</primary></indexterm>
1314 <indexterm><primary>mixed mode</primary></indexterm>
1315 In any case, never execute the <command>net rpc join</command> command in an attempt
1316 to join the Samba server to the domain, unless you wish not to use the Kerberos
1317 security protocols. Use of the older RPC-based domain join facility requires that
1318 Windows Server 200x ADS has been configured appropriately for mixed mode operation.
1322 <indexterm><primary>tdbdump</primary></indexterm>
1323 <indexterm><primary>/etc/samba/secrets.tdb</primary></indexterm>
1324 If the <command>tdbdump</command> is installed on your system (not essential),
1325 you can look inside the <filename>/etc/samba/secrets.tdb</filename> file. If
1326 you wish to do this, execute:
1328 &rootprompt; tdbdump secrets.tdb
1330 key = "SECRETS/SID/LONDON"
1331 data = "\01\04\00\00\00\00\00\05\15\00\00\00\EBw\86\F1\ED\BD\
1332 F6{\5C6\E5W\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\
1333 00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\
1334 00\00\00\00\00\00\00\00"
1337 key = "SECRETS/MACHINE_PASSWORD/LONDON"
1338 data = "le3Q5FPnN5.ueC\00"
1341 key = "SECRETS/MACHINE_SEC_CHANNEL_TYPE/LONDON"
1342 data = "\02\00\00\00"
1345 key = "SECRETS/MACHINE_LAST_CHANGE_TIME/LONDON"
1349 This is given to demonstrate to the skeptics that this process truly does work.
1353 It is now time to start Samba in the usual way (as has been done many time before
1358 <indexterm><primary>wbinfo</primary></indexterm>
1359 This is a good time to verify that everything is working. First, check that
1360 winbind is able to obtain the list of users and groups from the ADS domain controller.
1361 Execute the following:
1363 &rootprompt; wbinfo -u
1364 LONDON+Administrator
1366 LONDON+SUPPORT_388945a0
1370 Good, the list of users was obtained. Now do likewise for group accounts:
1372 &rootprompt; wbinfo -g
1373 LONDON+Domain Computers
1374 LONDON+Domain Controllers
1375 LONDON+Schema Admins
1376 LONDON+Enterprise Admins
1377 LONDON+Domain Admins
1379 LONDON+Domain Guests
1380 LONDON+Group Policy Creator Owners
1381 LONDON+DnsUpdateProxy
1383 Excellent. That worked also, as expected.
1386 <step><para><indexterm>
1387 <primary>getent</primary>
1389 Now repeat this via NSS to validate that full identity resolution is
1390 functional as required. Execute:
1392 &rootprompt; getent passwd
1394 LONDON+Administrator:x:10000:10000:Administrator:
1395 /home/LONDON/administrator:/bin/bash
1396 LONDON+Guest:x:10001:10001:Guest:
1397 /home/LONDON/guest:/bin/bash
1398 LONDON+SUPPORT_388945a0:x:10002:10000:SUPPORT_388945a0:
1399 /home/LONDON/support_388945a0:/bin/bash
1400 LONDON+krbtgt:x:10003:10000:krbtgt:
1401 /home/LONDON/krbtgt:/bin/bash
1402 LONDON+jht:x:10004:10000:John H. Terpstra:
1403 /home/LONDON/jht:/bin/bash
1405 Okay, ADS user accounts are being resolved. Now you try group resolution:
1407 &rootprompt; getent group
1409 LONDON+Domain Computers:x:10002:
1410 LONDON+Domain Controllers:x:10003:
1411 LONDON+Schema Admins:x:10004:LONDON+Administrator
1412 LONDON+Enterprise Admins:x:10005:LONDON+Administrator
1413 LONDON+Domain Admins:x:10006:LONDON+jht,LONDON+Administrator
1414 LONDON+Domain Users:x:10000:
1415 LONDON+Domain Guests:x:10001:
1416 LONDON+Group Policy Creator Owners:x:10007:LONDON+Administrator
1417 LONDON+DnsUpdateProxy:x:10008:
1419 This is very pleasing. Everything works as expected.
1423 <indexterm><primary>net</primary><secondary>ads</secondary><tertiary>info</tertiary></indexterm>
1424 <indexterm><primary>Active Directory</primary><secondary>server</secondary></indexterm>
1425 <indexterm><primary>Kerberos</primary></indexterm>
1426 You may now perform final verification that communications between Samba-3 winbind and
1427 the Active Directory server is using Kerberos protocols. Execute the following:
1429 &rootprompt; net ads info
1430 LDAP server: 192.168.2.123
1431 LDAP server name: w2k3s
1432 Realm: LONDON.ABMAS.BIZ
1433 Bind Path: dc=LONDON,dc=ABMAS,dc=BIZ
1435 Server time: Sat, 03 Jan 2004 02:44:44 GMT
1436 KDC server: 192.168.2.123
1437 Server time offset: 2
1439 It should be noted that Kerberos protocols are time-clock critical. You should
1440 keep all server time clocks synchronized using the network time protocol (NTP).
1441 In any case, the output we obtained confirms that all systems are operational.
1445 <indexterm><primary>net</primary><secondary>ads</secondary><tertiary>status</tertiary></indexterm>
1446 There is one more action you elect to take, just because you are paranoid and disbelieving,
1447 so you execute the following command:
1449 &rootprompt; net ads status -UAdministrator%not24get
1452 objectClass: organizationalPerson
1454 objectClass: computer
1456 distinguishedName: CN=fran,CN=Computers,DC=london,DC=abmas,DC=biz
1458 whenCreated: 20040103092006.0Z
1459 whenChanged: 20040103092006.0Z
1463 objectGUID: 58f89519-c467-49b9-acb0-f099d73696e
1464 userAccountControl: 69632
1470 lastLogon: 127175965783327936
1472 pwdLastSet: 127175952062598496
1474 objectSid: S-1-5-21-4052121579-2079768045-1474639452-1109
1475 accountExpires: 9223372036854775807
1477 sAMAccountName: fran$
1478 sAMAccountType: 805306369
1479 operatingSystem: Samba
1480 operatingSystemVersion: 3.0.20-SUSE
1482 userPrincipalName: HOST/fran@LONDON.ABMAS.BIZ
1483 servicePrincipalName: CIFS/fran.london.abmas.biz
1484 servicePrincipalName: CIFS/fran
1485 servicePrincipalName: HOST/fran.london.abmas.biz
1486 servicePrincipalName: HOST/fran
1487 objectCategory: CN=Computer,CN=Schema,CN=Configuration,
1488 DC=london,DC=abmas,DC=biz
1489 isCriticalSystemObject: FALSE
1490 -------------- Security Descriptor (revision: 1, type: 0x8c14)
1491 owner SID: S-1-5-21-4052121579-2079768045-1474639452-512
1492 group SID: S-1-5-21-4052121579-2079768045-1474639452-513
1493 ------- (system) ACL (revision: 4, size: 120, number of ACEs: 2)
1494 ------- ACE (type: 0x07, flags: 0x5a, size: 0x38,
1495 mask: 0x20, object flags: 0x3)
1497 access type: AUDIT OBJECT
1499 [Write All Properties]
1500 ------- ACE (type: 0x07, flags: 0x5a, size: 0x38,
1501 mask: 0x20, object flags: 0x3)
1503 access type: AUDIT OBJECT
1505 [Write All Properties]
1506 ------- (user) ACL (revision: 4, size: 1944, number of ACEs: 40)
1507 ------- ACE (type: 0x00, flags: 0x00, size: 0x24, mask: 0xf01ff)
1508 access SID: S-1-5-21-4052121579-2079768045-1474639452-512
1509 access type: ALLOWED
1510 Permissions: [Full Control]
1511 ------- ACE (type: 0x00, flags: 0x00, size: 0x18, mask: 0xf01ff)
1512 access SID: S-1-5-32-548
1514 ------- ACE (type: 0x05, flags: 0x12, size: 0x38,
1515 mask: 0x10, object flags: 0x3)
1517 access type: ALLOWED OBJECT
1519 [Read All Properties]
1520 -------------- End Of Security Descriptor
1522 And now you have conclusive proof that your Samba-3 ADS domain member server
1523 called <constant>FRAN</constant> is able to communicate fully with the ADS
1531 Your Samba-3 ADS domain member server is ready for use. During training sessions,
1532 you may be asked what is inside the <filename>winbindd_cache.tdb and winbindd_idmap.tdb</filename>
1533 files. Since curiosity just took hold of you, execute the following:
1535 &rootprompt; tdbdump /var/lib/samba/winbindd_idmap.tdb
1537 key = "S-1-5-21-4052121579-2079768045-1474639452-501\00"
1538 data = "UID 10001\00"
1541 key = "UID 10005\00"
1542 data = "S-1-5-21-4052121579-2079768045-1474639452-1111\00"
1545 key = "GID 10004\00"
1546 data = "S-1-5-21-4052121579-2079768045-1474639452-518\00"
1549 key = "S-1-5-21-4052121579-2079768045-1474639452-502\00"
1550 data = "UID 10003\00"
1554 &rootprompt; tdbdump /var/lib/samba/winbindd_cache.tdb
1557 data = "\00\00\00\00bp\00\00\06\00\00\00\0DAdministrator\0D
1558 Administrator-S-1-5-21-4052121579-2079768045-1474639452-500-
1559 S-1-5-21-4052121579-2079768045-1474639452-513\05Guest\05
1560 Guest-S-1-5-21-4052121579-2079768045-1474639452-501-
1561 S-1-5-21-4052121579-2079768045-1474639452-514\10
1562 SUPPORT_388945a0\10SUPPORT_388945a0.
1563 S-1-5-21-4052121579-2079768045-1474639452-1001-
1564 S-1-5-21-4052121579-2079768045-1474639452-513\06krbtgt\06
1565 krbtgt-S-1-5-21-4052121579-2079768045-1474639452-502-
1566 S-1-5-21-4052121579-2079768045-1474639452-513\03jht\10
1567 John H. Terpstra.S-1-5-21-4052121579-2079768045-1474639452-1110-
1568 S-1-5-21-4052121579-2079768045-1474639452-513"
1571 key = "GM/S-1-5-21-4052121579-2079768045-1474639452-512"
1572 data = "\00\00\00\00bp\00\00\02\00\00\00.
1573 S-1-5-21-4052121579-2079768045-1474639452-1110\03
1574 jht\01\00\00\00-S-1-5-21-4052121579-2079768045-1474639452-500\0D
1575 Administrator\01\00\00\00"
1578 key = "SN/S-1-5-21-4052121579-2079768045-1474639452-513"
1579 data = "\00\00\00\00xp\00\00\02\00\00\00\0CDomain Users"
1582 key = "GM/S-1-5-21-4052121579-2079768045-1474639452-518"
1583 data = "\00\00\00\00bp\00\00\01\00\00\00-
1584 S-1-5-21-4052121579-2079768045-1474639452-500\0D
1585 Administrator\01\00\00\00"
1588 key = "SEQNUM/LONDON\00"
1589 data = "xp\00\00C\92\F6?"
1592 key = "U/S-1-5-21-4052121579-2079768045-1474639452-1110"
1593 data = "\00\00\00\00xp\00\00\03jht\10John H. Terpstra.
1594 S-1-5-21-4052121579-2079768045-1474639452-1110-
1595 S-1-5-21-4052121579-2079768045-1474639452-513"
1598 key = "NS/S-1-5-21-4052121579-2079768045-1474639452-502"
1599 data = "\00\00\00\00bp\00\00-
1600 S-1-5-21-4052121579-2079768045-1474639452-502"
1603 key = "SN/S-1-5-21-4052121579-2079768045-1474639452-1001"
1604 data = "\00\00\00\00bp\00\00\01\00\00\00\10SUPPORT_388945a0"
1607 key = "SN/S-1-5-21-4052121579-2079768045-1474639452-500"
1608 data = "\00\00\00\00bp\00\00\01\00\00\00\0DAdministrator"
1611 key = "U/S-1-5-21-4052121579-2079768045-1474639452-502"
1612 data = "\00\00\00\00bp\00\00\06krbtgt\06krbtgt-
1613 S-1-5-21-4052121579-2079768045-1474639452-502-
1614 S-1-5-21-4052121579-2079768045-1474639452-513"
1618 Now all is revealed. Your curiosity, as well as that of your team, has been put at ease.
1619 May this server serve well all who happen upon it.
1622 <example id="ch9-adssdm">
1623 <title>Samba Domain Member &smb.conf; File for Active Directory Membership</title>
1625 <smbconfcomment>Global parameters</smbconfcomment>
1626 <smbconfsection name="[global]"/>
1627 <smbconfoption name="unix charset">LOCALE</smbconfoption>
1628 <smbconfoption name="workgroup">LONDON</smbconfoption>
1629 <smbconfoption name="realm">LONDON.ABMAS.BIZ</smbconfoption>
1630 <smbconfoption name="server string">Samba 3.0.20</smbconfoption>
1631 <smbconfoption name="security">ADS</smbconfoption>
1632 <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
1633 <smbconfoption name="log level">1</smbconfoption>
1634 <smbconfoption name="syslog">0</smbconfoption>
1635 <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
1636 <smbconfoption name="max log size">50</smbconfoption>
1637 <smbconfoption name="printcap name">CUPS</smbconfoption>
1638 <smbconfoption name="ldap ssl">no</smbconfoption>
1639 <smbconfoption name="idmap uid">10000-20000</smbconfoption>
1640 <smbconfoption name="idmap gid">10000-20000</smbconfoption>
1641 <smbconfoption name="template primary group">"Domain Users"</smbconfoption>
1642 <smbconfoption name="template shell">/bin/bash</smbconfoption>
1643 <smbconfoption name="winbind separator">+</smbconfoption>
1644 <smbconfoption name="printing">cups</smbconfoption>
1646 <smbconfsection name="[homes]"/>
1647 <smbconfoption name="comment">Home Directories</smbconfoption>
1648 <smbconfoption name="valid users">%S</smbconfoption>
1649 <smbconfoption name="read only">No</smbconfoption>
1650 <smbconfoption name="browseable">No</smbconfoption>
1652 <smbconfsection name="[printers]"/>
1653 <smbconfoption name="comment">SMB Print Spool</smbconfoption>
1654 <smbconfoption name="path">/var/spool/samba</smbconfoption>
1655 <smbconfoption name="guest ok">Yes</smbconfoption>
1656 <smbconfoption name="printable">Yes</smbconfoption>
1657 <smbconfoption name="browseable">No</smbconfoption>
1659 <smbconfsection name="[print$]"/>
1660 <smbconfoption name="comment">Printer Drivers</smbconfoption>
1661 <smbconfoption name="path">/var/lib/samba/drivers</smbconfoption>
1662 <smbconfoption name="admin users">root, Administrator</smbconfoption>
1663 <smbconfoption name="write list">root</smbconfoption>
1668 <title>IDMAP_RID with Winbind</title>
1671 <indexterm><primary>idmap_rid</primary></indexterm>
1672 <indexterm><primary>SID</primary></indexterm>
1673 <indexterm><primary>RID</primary></indexterm>
1674 <indexterm><primary>IDMAP</primary></indexterm>
1675 The <command>idmap_rid</command> facility is a new tool that, unlike native winbind, creates a
1676 predictable mapping of MS Windows SIDs to UNIX UIDs and GIDs. The key benefit of this method
1677 of implementing the Samba IDMAP facility is that it eliminates the need to store the IDMAP data
1678 in a central place. The downside is that it can be used only within a single ADS domain and
1679 is not compatible with trusted domain implementations.
1683 <indexterm><primary>SID</primary></indexterm>
1684 <indexterm><primary>allow trusted domains</primary></indexterm>
1685 <indexterm><primary>idmap uid</primary></indexterm>
1686 <indexterm><primary>idmap gid</primary></indexterm>
1687 This alternate method of SID to UID/GID mapping can be achieved with the idmap_rid
1688 plug-in. This plug-in uses the RID of the user SID to derive the UID and GID by adding the
1689 RID to a base value specified. This utility requires that the parameter
1690 <quote>allow trusted domains = No</quote> must be specified, as it is not compatible
1691 with multiple domain environments. The <parameter>idmap uid</parameter> and
1692 <parameter>idmap gid</parameter> ranges must be specified.
1696 <indexterm><primary>idmap_rid</primary></indexterm>
1697 <indexterm><primary>realm</primary></indexterm>
1698 The idmap_rid facility can be used both for NT4/Samba-style domains as well as with Active Directory.
1699 To use this with an NT4 domain, the <parameter>realm</parameter> is not used. Additionally the
1700 method used to join the domain uses the <constant>net rpc join</constant> process.
1704 An example &smb.conf; file for an ADS domain environment is shown in <link linkend="sbe-idmapridex"/>.
1707 <example id="sbe-idmapridex">
1708 <title>Example &smb.conf; File Using <constant>idmap_rid</constant></title>
1710 <smbconfcomment>Global parameters</smbconfcomment>
1711 <smbconfsection name="[global]"/>
1712 <smbconfoption name="workgroup">KPAK</smbconfoption>
1713 <smbconfoption name="netbios name">BIGJOE</smbconfoption>
1714 <smbconfoption name="realm">CORP.KPAK.COM</smbconfoption>
1715 <smbconfoption name="server string">Office Server</smbconfoption>
1716 <smbconfoption name="security">ADS</smbconfoption>
1717 <smbconfoption name="allow trusted domains">No</smbconfoption>
1718 <smbconfoption name="idmap backend">idmap_rid:KPAK=500-100000000</smbconfoption>
1719 <smbconfoption name="idmap uid">500-100000000</smbconfoption>
1720 <smbconfoption name="idmap gid">500-100000000</smbconfoption>
1721 <smbconfoption name="template shell">/bin/bash</smbconfoption>
1722 <smbconfoption name="winbind use default domain">Yes</smbconfoption>
1723 <smbconfoption name="winbind enum users">No</smbconfoption>
1724 <smbconfoption name="winbind enum groups">No</smbconfoption>
1725 <smbconfoption name="winbind nested groups">Yes</smbconfoption>
1726 <smbconfoption name="printer admin">"KPAK\Domain Admins"</smbconfoption>
1731 <indexterm><primary>large domain</primary></indexterm>
1732 <indexterm><primary>Active Directory</primary></indexterm>
1733 <indexterm><primary>response</primary></indexterm>
1734 <indexterm><primary>getent</primary></indexterm>
1735 In a large domain with many users, it is imperative to disable enumeration of users and groups.
1736 For example, at a site that has 22,000 users in Active Directory the winbind-based user and
1737 group resolution is unavailable for nearly 12 minutes following first start-up of
1738 <command>winbind</command>. Disabling of such enumeration results in instantaneous response.
1739 The disabling of user and group enumeration means that it will not be possible to list users
1740 or groups using the <command>getent passwd</command> and <command>getent group</command>
1741 commands. It will be possible to perform the lookup for individual users, as shown in the procedure
1746 <indexterm><primary>NSS</primary></indexterm>
1747 <indexterm><primary>/etc/nsswitch.conf</primary></indexterm>
1748 The use of this tool requires configuration of NSS as per the native use of winbind. Edit the
1749 <filename>/etc/nsswitch.conf</filename> so it has the following parameters:
1752 passwd: files winbind
1753 shadow: files winbind
1754 group: files winbind
1762 The following procedure can be used to utilize the idmap_rid facility:
1767 Create or install and &smb.conf; file with the above configuration.
1771 Edit the <filename>/etc/nsswitch.conf</filename> file as shown above.
1777 &rootprompt; net ads join -UAdministrator%password
1778 Using short domain name -- KPAK
1779 Joined 'BIGJOE' to realm 'CORP.KPAK.COM'
1784 <indexterm><primary>failed join</primary></indexterm>
1785 An invalid or failed join can be detected by executing:
1787 &rootprompt; net ads testjoin
1788 BIGJOE$@'s password:
1789 [2004/11/05 16:53:03, 0] utils/net_ads.c:ads_startup(186)
1790 ads_connect: No results returned
1791 Join to domain is not valid
1793 The specific error message may differ from the above because it depends on the type of failure that
1794 may have occurred. Increase the <parameter>log level</parameter> to 10, repeat the above test,
1795 and then examine the log files produced to identify the nature of the failure.
1799 Start the <command>nmbd</command>, <command>winbind,</command> and <command>smbd</command> daemons in the order shown.
1803 Validate the operation of this configuration by executing:
1804 <indexterm><primary></primary></indexterm>
1806 &rootprompt; getent passwd administrator
1807 administrator:x:1000:1013:Administrator:/home/BE/administrator:/bin/bash
1815 <title>IDMAP Storage in LDAP using Winbind</title>
1818 <indexterm><primary>ADAM</primary></indexterm>
1819 <indexterm><primary>ADS</primary></indexterm>
1820 The storage of IDMAP information in LDAP can be used with both NT4/Samba-3-style domains as well as
1821 with ADS domains. OpenLDAP is a commonly used LDAP server for this purpose, although any standards-compliant
1822 LDAP server can be used. It is therefore possible to deploy this IDMAP configuration using
1823 the Sun iPlanet LDAP server, Novell eDirectory, Microsoft ADS plus ADAM, and so on.
1827 The example in <link linkend="sbeunxa"/> is for an ADS-style domain.
1830 <example id="sbeunxa">
1831 <title>Typical ADS Style Domain &smb.conf; File</title>
1833 <smbconfcomment>Global parameters</smbconfcomment>
1834 <smbconfsection name="[global]"/>
1835 <smbconfoption name="workgroup">SNOWSHOW</smbconfoption>
1836 <smbconfoption name="netbios name">GOODELF</smbconfoption>
1837 <smbconfoption name="realm">SNOWSHOW.COM</smbconfoption>
1838 <smbconfoption name="server string">Samba Server</smbconfoption>
1839 <smbconfoption name="security">ADS</smbconfoption>
1840 <smbconfoption name="log level">1 ads:10 auth:10 sam:10 rpc:10</smbconfoption>
1841 <smbconfoption name="ldap admin dn">cn=Manager,dc=SNOWSHOW,dc=COM</smbconfoption>
1842 <smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
1843 <smbconfoption name="ldap suffix">dc=SNOWSHOW,dc=COM</smbconfoption>
1844 <smbconfoption name="idmap backend">ldap:ldap://ldap.snowshow.com</smbconfoption>
1845 <smbconfoption name="idmap uid">150000-550000</smbconfoption>
1846 <smbconfoption name="idmap gid">150000-550000</smbconfoption>
1847 <smbconfoption name="template shell">/bin/bash</smbconfoption>
1848 <smbconfoption name="winbind use default domain">Yes</smbconfoption>
1853 <indexterm><primary>realm</primary></indexterm>
1854 In the case of an NT4 or Samba-3-style domain the <parameter>realm</parameter> is not used, and the
1855 command used to join the domain is <command>net rpc join</command>. The above example also demonstrates
1856 advanced error reporting techniques that are documented in the chapter called "Reporting Bugs" in
1857 <quote>The Official Samba-3 HOWTO and Reference Guide, Second Edition</quote> (TOSHARG2).
1861 <indexterm><primary>MIT kerberos</primary></indexterm>
1862 <indexterm><primary>Heimdal kerberos</primary></indexterm>
1863 <indexterm><primary>/etc/krb5.conf</primary></indexterm>
1864 Where MIT kerberos is installed (version 1.3.4 or later), edit the <filename>/etc/krb5.conf</filename>
1865 file so it has the following contents:
1868 default = FILE:/var/log/krb5libs.log
1869 kdc = FILE:/var/log/krb5kdc.log
1870 admin_server = FILE:/var/log/kadmind.log
1873 default_realm = SNOWSHOW.COM
1874 dns_lookup_realm = false
1875 dns_lookup_kdc = true
1880 ticket_lifetime = 36000
1881 renew_lifetime = 36000
1883 krb4_convert = false
1889 Where Heimdal kerberos is installed, edit the <filename>/etc/krb5.conf</filename>
1890 file so it is either empty (i.e., no contents) or it has the following contents:
1893 default_realm = SNOWSHOW.COM
1898 kdc = ADSDC.SHOWSHOW.COM
1902 .snowshow.com = SNOWSHOW.COM
1907 Samba cannot use the Heimdal libraries if there is no <filename>/etc/krb5.conf</filename> file.
1908 So long as there is an empty file, the Heimdal kerberos libraries will be usable. There is no
1909 need to specify any settings because Samba, using the Heimdal libraries, can figure this out automatically.
1912 Edit the NSS control file <filename>/etc/nsswitch.conf</filename> so it has the following entries:
1925 <indexterm><primary>PADL</primary></indexterm>
1926 <indexterm><primary>/etc/ldap.conf</primary></indexterm>
1927 You will need the <ulink url="http://www.padl.com">PADL</ulink> <command>nss_ldap</command>
1928 tool set for this solution. Configure the <filename>/etc/ldap.conf</filename> file so it has
1929 the information needed. The following is an example of a working file:
1932 base dc=snowshow,dc=com
1933 binddn cn=Manager,dc=snowshow,dc=com
1938 nss_base_passwd ou=People,dc=snowshow,dc=com?one
1939 nss_base_shadow ou=People,dc=snowshow,dc=com?one
1940 nss_base_group ou=Groups,dc=snowshow,dc=com?one
1946 The following procedure may be followed to affect a working configuration:
1950 Configure the &smb.conf; file as shown above.
1954 Create the <filename>/etc/krb5.conf</filename> file following the indications above.
1958 Configure the <filename>/etc/nsswitch.conf</filename> file as shown above.
1962 Download, build, and install the PADL nss_ldap tool set. Configure the
1963 <filename>/etc/ldap.conf</filename> file as shown above.
1967 Configure an LDAP server and initialize the directory with the top-level entries needed by IDMAP
1968 as shown in the following LDIF file:
1970 dn: dc=snowshow,dc=com
1971 objectClass: dcObject
1972 objectClass: organization
1974 o: The Greatest Snow Show in Singapore.
1975 description: Posix and Samba LDAP Identity Database
1977 dn: cn=Manager,dc=snowshow,dc=com
1978 objectClass: organizationalRole
1980 description: Directory Manager
1982 dn: ou=Idmap,dc=snowshow,dc=com
1983 objectClass: organizationalUnit
1989 Execute the command to join the Samba domain member server to the ADS domain as shown here:
1991 &rootprompt; net ads testjoin
1992 Using short domain name -- SNOWSHOW
1993 Joined 'GOODELF' to realm 'SNOWSHOW.COM'
1998 Store the LDAP server access password in the Samba <filename>secrets.tdb</filename> file as follows:
2000 &rootprompt; smbpasswd -w not24get
2005 Start the <command>nmbd</command>, <command>winbind</command>, and <command>smbd</command> daemons in the order shown.
2011 <indexterm><primary>diagnostic</primary></indexterm>
2012 Follow the diagnostic procedures shown earlier in this chapter to identify success or failure of the join.
2013 In many cases a failure is indicated by a silent return to the command prompt with no indication of the
2020 <title>IDMAP and NSS Using LDAP from ADS with RFC2307bis Schema Extension</title>
2023 <indexterm><primary>rfc2307bis</primary></indexterm>
2024 <indexterm><primary>schema</primary></indexterm>
2025 The use of this method is messy. The information provided in this section is for guidance only
2026 and is very definitely not complete. This method does work; it is used in a number of large sites
2027 and has an acceptable level of performance.
2031 An example &smb.conf; file is shown in <link linkend="sbewinbindex"/>.
2034 <example id="sbewinbindex">
2035 <title>ADS Membership Using RFC2307bis Identity Resolution &smb.conf; File</title>
2037 <smbconfcomment>Global parameters</smbconfcomment>
2038 <smbconfsection name="[global]"/>
2039 <smbconfoption name="workgroup">BUBBAH</smbconfoption>
2040 <smbconfoption name="netbios name">MADMAX</smbconfoption>
2041 <smbconfoption name="realm">BUBBAH.COM</smbconfoption>
2042 <smbconfoption name="server string">Samba Server</smbconfoption>
2043 <smbconfoption name="security">ADS</smbconfoption>
2044 <smbconfoption name="idmap uid">150000-550000</smbconfoption>
2045 <smbconfoption name="idmap gid">150000-550000</smbconfoption>
2046 <smbconfoption name="template shell">/bin/bash</smbconfoption>
2047 <smbconfoption name="winbind use default domain">Yes</smbconfoption>
2048 <smbconfoption name="winbind trusted domains only">Yes</smbconfoption>
2049 <smbconfoption name="winbind nested groups">Yes</smbconfoption>
2054 <indexterm><primary>nss_ldap</primary></indexterm>
2055 The DMS must be joined to the domain using the usual procedure. Additionally, it is necessary
2056 to build and install the PADL nss_ldap tool set. Be sure to build this tool set with the
2059 ./configure --enable-rfc2307bis --enable-schema-mapping
2065 <indexterm><primary>/etc/nsswitch.conf</primary></indexterm>
2066 The following <filename>/etc/nsswitch.conf</filename> file contents are required:
2079 <indexterm><primary>/etc/ldap.conf</primary></indexterm>
2080 <indexterm><primary>nss_ldap</primary></indexterm>
2081 The <filename>/etc/ldap.conf</filename> file must be configured also. Refer to the PADL documentation
2082 and source code for nss_ldap instructions.
2086 The next step involves preparation on the ADS schema. This is briefly discussed in the remaining
2087 part of this chapter.
2091 <title>IDMAP, Active Directory, and MS Services for UNIX 3.5</title>
2094 <indexterm><primary>SFU</primary></indexterm>
2095 The Microsoft Windows Service for UNIX version 3.5 is available for free
2096 <ulink url="http://www.microsoft.com/windows/sfu/">download</ulink>
2097 from the Microsoft Web site. You will need to download this tool and install it following
2098 Microsoft instructions.
2104 <title>IDMAP, Active Directory, and AD4UNIX</title>
2107 Instructions for obtaining and installing the AD4UNIX tool set can be found from the
2108 <ulink url="http://www.geekcomix.com/cgi-bin/classnotes/wiki.pl?LDAP01/An_Alternative_Approach">
2109 Geekcomix</ulink> Web site.
2120 <title>UNIX/Linux Client Domain Member</title>
2123 <primary>user credentials</primary>
2125 So far this chapter has been mainly concerned with the provision of file and print
2126 services for domain member servers. However, an increasing number of UNIX/Linux
2127 workstations are being installed that do not act as file or print servers to anyone
2128 other than a single desktop user. The key demand for desktop systems is to be able
2129 to log onto any UNIX/Linux or Windows desktop using the same network user credentials.
2133 <primary>Single Sign-On</primary>
2136 The ability to use a common set of user credential across a variety of network systems
2137 is generally regarded as a single sign-on (SSO) solution. SSO systems are sold by a
2138 large number of vendors and include a range of technologies such as:
2147 Federated directory provisioning
2151 Metadirectory server solutions
2155 Replacement authentication systems
2160 <primary>Identity management</primary>
2162 There are really four solutions that provide integrated authentication and
2163 user identity management facilities:
2168 Samba winbind (free). Samba-3.0.20 introduced a complete replacement for Winbind that now
2169 provides a greater level of scalability in large ADS environments.
2173 <ulink url="http://www.padl.com">PADL</ulink> PAM and LDAP tools (free).
2177 <ulink url="http://www.vintela.com">Vintela</ulink> Authentication Services (commercial).
2181 <ulink url="http://www.centrify.com">Centrify</ulink> DirectControl (commercial).
2182 Centrify's commercial product allows UNIX and Linux systems to use Active Directory
2183 security, directory and policy services. Enhancements include a centralized ID mapping that
2184 allows Samba, DirectControl and Active Directory to seamlessly work together.
2189 The following guidelines are pertinent to the deployment of winbind-based authentication
2190 and identity resolution with the express purpose of allowing users to log on to UNIX/Linux desktops
2191 using Windows network domain user credentials (username and password).
2195 You should note that it is possible to use LDAP-based PAM and NSS tools to permit distributed
2196 systems logons (SSO), providing user and group accounts are stored in an LDAP directory. This
2197 provides logon services for UNIX/Linux users, while Windows users obtain their sign-on
2198 support via Samba-3.
2202 <indexterm><primary>Windows Services for UNIX</primary><see>SUS</see></indexterm>
2203 On the other hand, if the authentication and identity resolution backend must be provided by
2204 a Windows NT4-style domain or from an Active Directory Domain that does not have the Microsoft
2205 Windows Services for UNIX installed, winbind is your best friend. Specific guidance for these
2206 situations now follows.
2210 <indexterm><primary>PAM</primary></indexterm>
2211 <indexterm><primary>Identity resolution</primary></indexterm>
2212 <indexterm><primary>NSS</primary></indexterm>
2213 To permit users to log on to a Linux system using Windows network credentials, you need to
2214 configure identity resolution (NSS) and PAM. This means that the basic steps include those
2215 outlined above with the addition of PAM configuration. Given that most workstations (desktop/client)
2216 usually do not need to provide file and print services to a group of users, the configuration
2217 of shares and printers is generally less important. Often this allows the share specifications
2218 to be entirely removed from the &smb.conf; file. That is obviously an administrator decision.
2222 <title>NT4 Domain Member</title>
2225 The following steps provide a Linux system that users can log onto using
2226 Windows NT4 (or Samba-3) domain network credentials:
2231 Follow the steps outlined in <link linkend="wdcsdm"/> and ensure that
2232 all validation tests function as shown.
2236 Identify what services users must log on to. On Red Hat Linux, if it is
2237 intended that the user shall be given access to all services, it may be
2238 most expeditious to simply configure the file
2239 <filename>/etc/pam.d/system-auth</filename>.
2243 Carefully make a backup copy of all PAM configuration files before you
2244 begin making changes. If you break the PAM configuration, please note
2245 that you may need to use an emergency boot process to recover your Linux
2246 system. It is possible to break the ability to log into the system if
2247 PAM files are incorrectly configured. The entire directory
2248 <filename>/etc/pam.d</filename> should be backed up to a safe location.
2252 If you require only console login support, edit the <filename>/etc/pam.d/login</filename>
2253 so it matches <link linkend="ch9-pamwnbdlogin"/>.
2257 To provide the ability to log onto the graphical desktop interface, you must edit
2258 the files <filename>gdm</filename> and <filename>xdm</filename> in the
2259 <filename>/etc/pam.d</filename> directory.
2263 Edit only one file at a time. Carefully validate its operation before attempting
2264 to reboot the machine.
2271 <title>ADS Domain Member</title>
2274 This procedure should be followed to permit a Linux network client (workstation/desktop)
2275 to permit users to log on using Microsoft Active Directory-based user credentials.
2280 Follow the steps outlined in <link linkend="adssdm"/> and ensure that
2281 all validation tests function as shown.
2285 Identify what services users must log on to. On Red Hat Linux, if it is
2286 intended that the user shall be given access to all services, it may be
2287 most expeditious to simply configure the file
2288 <filename>/etc/pam.d/system-auth</filename> as shown in <link linkend="ch9-rhsysauth"/>.
2292 Carefully make a backup copy of all PAM configuration files before you
2293 begin making changes. If you break the PAM configuration, please note
2294 that you may need to use an emergency boot process to recover your Linux
2295 system. It is possible to break the ability to log into the system if
2296 PAM files are incorrectly configured. The entire directory
2297 <filename>/etc/pam.d</filename> should be backed up to a safe location.
2301 If you require only console login support, edit the <filename>/etc/pam.d/login</filename>
2302 so it matches <link linkend="ch9-pamwnbdlogin"/>.
2306 To provide the ability to log onto the graphical desktop interface, you must edit
2307 the files <filename>gdm</filename> and <filename>xdm</filename> in the
2308 <filename>/etc/pam.d</filename> directory.
2312 Edit only one file at a time. Carefully validate its operation before attempting
2313 to reboot the machine.
2319 <example id="ch9-pamwnbdlogin">
2320 <title>SUSE: PAM <filename>login</filename> Module Using Winbind</title>
2325 auth sufficient pam_unix2.so nullok
2326 auth sufficient pam_winbind.so use_first_pass use_authtok
2327 auth required pam_securetty.so
2328 auth required pam_nologin.so
2329 auth required pam_env.so
2330 auth required pam_mail.so
2331 account sufficient pam_unix2.so
2332 account sufficient pam_winbind.so user_first_pass use_authtok
2333 password required pam_pwcheck.so nullok
2334 password sufficient pam_unix2.so nullok use_first_pass use_authtok
2335 password sufficient pam_winbind.so use_first_pass use_authtok
2336 session sufficient pam_unix2.so none
2337 session sufficient pam_winbind.so use_first_pass use_authtok
2338 session required pam_limits.so
2342 <example id="ch9-pamwbndxdm">
2343 <title>SUSE: PAM <filename>xdm</filename> Module Using Winbind</title>
2345 # /etc/pam.d/gdm (/etc/pam.d/xdm)
2348 auth sufficient pam_unix2.so nullok
2349 auth sufficient pam_winbind.so use_first_pass use_authtok
2350 account sufficient pam_unix2.so
2351 account sufficient pam_winbind.so use_first_pass use_authtok
2352 password sufficient pam_unix2.so
2353 password sufficient pam_winbind.so use_first_pass use_authtok
2354 session sufficient pam_unix2.so
2355 session sufficient pam_winbind.so use_first_pass use_authtok
2356 session required pam_dev perm.so
2357 session required pam_resmgr.so
2361 <example id="ch9-rhsysauth">
2362 <title>Red Hat 9: PAM System Authentication File: <filename>/etc/pam.d/system-auth</filename> Module Using Winbind</title>
2365 auth required /lib/security/$ISA/pam_env.so
2366 auth sufficient /lib/security/$ISA/pam_unix.so likeauth nullok
2367 auth sufficient /lib/security/$ISA/pam_winbind.so use_first_pass
2368 auth required /lib/security/$ISA/pam_deny.so
2370 account required /lib/security/$ISA/pam_unix.so
2371 account sufficient /lib/security/$ISA/pam_winbind.so use_first_pass
2373 password required /lib/security/$ISA/pam_cracklib.so retry=3 type=
2374 # Note: The above line is complete. There is nothing following the '='
2375 password sufficient /lib/security/$ISA/pam_unix.so \
2376 nullok use_authtok md5 shadow
2377 password sufficient /lib/security/$ISA/pam_winbind.so use_first_pass
2378 password required /lib/security/$ISA/pam_deny.so
2380 session required /lib/security/$ISA/pam_limits.so
2381 session sufficient /lib/security/$ISA/pam_unix.so
2382 session sufficient /lib/security/$ISA/pam_winbind.so use_first_pass
2389 <title>Key Points Learned</title>
2392 The addition of UNIX/Linux Samba servers and clients is a common requirement. In this chapter, you
2393 learned how to integrate such servers so that the UID/GID mappings they use can be consistent
2394 across all domain member servers. You also discovered how to implement the ability to use Samba
2395 or Windows domain account credentials to log on to a UNIX/Linux client.
2399 The following are key points made in this chapter:
2404 Domain controllers are always authoritative for the domain.
2408 Domain members may have local accounts and must be able to resolve the identity of
2409 domain user accounts. Domain user account identity must map to a local UID/GID. That
2410 local UID/GID can be stored in LDAP. This way, it is possible to share the IDMAP data
2411 across all domain member machines.
2415 Resolution of user and group identities on domain member machines may be implemented
2416 using direct LDAP services or using winbind.
2420 On NSS/PAM enabled UNIX/Linux systems, NSS is responsible for identity management
2421 and PAM is responsible for authentication of logon credentials (username and password).
2430 <title>Questions and Answers</title>
2433 The following questions were obtained from the mailing list and also from private discussions
2434 with Windows network administrators.
2437 <qandaset defaultlabel="chap09qa" type="number">
2442 We use NIS for all UNIX accounts. Why do we need winbind?
2449 <indexterm><primary>NIS</primary></indexterm>
2450 <indexterm><primary>encrypted passwords</primary></indexterm>
2451 <indexterm><primary>smbpasswd</primary></indexterm>
2452 <indexterm><primary>tdbsam</primary></indexterm>
2453 <indexterm><primary>passdb backend</primary></indexterm>
2454 <indexterm><primary>Winbind</primary></indexterm>
2455 You can use NIS for your UNIX accounts. NIS does not store the Windows encrypted
2456 passwords that need to be stored in one of the acceptable passdb backends.
2457 Your choice of backend is limited to <parameter>smbpasswd</parameter> or
2458 <parameter>tdbsam</parameter>. Winbind is needed to handle the resolution of
2459 SIDs from trusted domains to local UID/GID values.
2463 <indexterm><primary>winbind trusted domains only</primary></indexterm>
2464 <indexterm><primary>getpwnam()</primary></indexterm>
2465 On a domain member server, you effectively map Windows domain users to local users
2466 that are in your NIS database by specifying the <parameter>winbind trusted domains
2467 only</parameter>. This causes user and group account lookups to be routed via
2468 the <command>getpwnam()</command> family of systems calls. On an NIS-enabled client,
2469 this pushes the resolution of users and groups out through NIS.
2473 As a general rule, it is always a good idea to run winbind on all Samba servers.
2483 Our IT management people do not like LDAP but are looking at Microsoft Active Directory.
2484 Which is better?<indexterm>
2485 <primary>Active Directory</primary>
2493 <primary>LDAP</primary>
2494 <secondary>server</secondary>
2495 </indexterm><indexterm>
2496 <primary>Kerberos</primary>
2497 </indexterm><indexterm>
2498 <primary>schema</primary>
2500 Microsoft Active Directory is an LDAP server that is intricately tied to a Kerberos
2501 infrastructure. Most IT managers who object to LDAP do so because
2502 an LDAP server is most often supplied as a raw tool that needs to be configured and
2503 for which the administrator must create the schema, create the administration tools, and
2504 devise the backup and recovery facilities in a site-dependent manner. LDAP servers
2505 in general are seen as a high-energy, high-risk facility.
2509 <primary>management</primary>
2511 Microsoft Active Directory by comparison is easy to install and configure and
2512 is supplied with all tools necessary to implement and manage the directory. For sites
2513 that lack a lot of technical competence, Active Directory is a good choice. For sites
2514 that have the technical competence to handle Active Directory well, LDAP is a good
2515 alternative. The real issue is, What type of solution does
2516 the site want? If management wants a choice to use an alternative, they may want to
2517 consider the options. On the other hand, if management just wants a solution that works,
2518 Microsoft Active Directory is a good solution.
2528 We want to implement a Samba PDC, four Samba BDCs, and 10 Samba servers. Is it possible
2529 to use NIS in place of LDAP?
2536 <primary>NIS</primary>
2537 </indexterm><indexterm>
2538 <primary>LDAP</primary>
2539 </indexterm><indexterm>
2540 <primary>encrypted passwords</primary>
2541 </indexterm><indexterm>
2542 <primary>synchronized</primary>
2543 </indexterm><indexterm>
2544 <primary>secure account password</primary>
2545 </indexterm><indexterm>
2546 <primary>PDC</primary>
2547 </indexterm><indexterm>
2548 <primary>BDC</primary>
2550 Yes, it is possible to use NIS in place of LDAP, but there may be problems with keeping
2551 the Windows (SMB) encrypted passwords database correctly synchronized across the entire
2552 network. Workstations (Windows client machines) periodically change their domain
2553 membership secure account password. How can you keep changes that are on remote BDCs
2554 synchronized on the PDC?
2558 <primary>centralized storage</primary>
2559 </indexterm><indexterm>
2560 <primary>management</primary>
2561 </indexterm><indexterm>
2562 <primary>network Identities</primary>
2564 LDAP is a more elegant solution because it permits centralized storage and management
2565 of all network identities (user, group, and machine accounts) together with all information
2566 Samba needs to provide to network clients and their users.
2576 Are you suggesting that users should not log on to a domain member server? If so, why?
2583 <primary>security</primary>
2584 </indexterm><indexterm>
2585 <primary>data</primary>
2586 <secondary>integrity</secondary>
2587 </indexterm><indexterm>
2588 <primary>mapped drives</primary>
2590 Many UNIX administrators mock the model that the personal computer industry has adopted
2591 as normative since the early days of Novell NetWare. The old
2592 perception of the necessity to keep users off file and print servers was a result of
2593 fears concerning the security and integrity of data. It was a simple and generally
2594 effective measure to keep users away from servers, except through mapped drives.
2598 <primary>user logins</primary>
2599 </indexterm><indexterm>
2600 <primary>risk</primary>
2601 </indexterm><indexterm>
2602 <primary>user errors</primary>
2603 </indexterm><indexterm>
2604 <primary>strategy</primary>
2605 </indexterm><indexterm>
2606 <primary>policy</primary>
2608 UNIX administrators are fully correct in asserting that UNIX servers and workstations
2609 are identical in terms of the software that is installed. They correctly assert that
2610 in a well-secured environment it is safe to store files on a system that has hundreds
2611 of users. But all network administrators must factor into the decision to allow or
2612 reject general user logins to a UNIX system that is principally a file and print
2613 server the risk to operations through simple user errors.
2614 Only then can one begin to appraise the best strategy and adopt a site-specific
2615 policy that best protects the needs of users and of the organization alike.
2619 <primary>system level logins</primary>
2621 From experience, it is my recommendation to keep general system-level logins to a
2622 practical minimum and to eliminate them if possible. This should not be taken as a
2623 hard rule, though. The better question is, what works best for the site?
2633 <primary>trusted domains</primary>
2634 </indexterm><indexterm>
2635 <primary>domain</primary>
2636 <secondary>trusted</secondary>
2637 </indexterm><indexterm>
2638 <primary>winbind trusted domains only</primary>
2639 </indexterm><indexterm>
2640 <primary>domain members</primary>
2642 We want to ensure that only users from our own domain plus from trusted domains can use our
2643 Samba servers. In the &smb.conf; file on all servers, we have enabled the <parameter>winbind
2644 trusted domains only</parameter> parameter. We now find that users from trusted domains
2645 cannot access our servers, and users from Windows clients that are not domain members
2646 can also access our servers. Is this a Samba bug?
2653 <primary>distributed</primary>
2654 </indexterm><indexterm>
2655 <primary>NIS</primary>
2656 </indexterm><indexterm>
2657 <primary>rsync</primary>
2658 </indexterm><indexterm>
2659 <primary>LDAP</primary>
2660 </indexterm><indexterm>
2661 <primary>winbindd</primary>
2662 </indexterm><indexterm>
2663 <primary>/etc/passwd</primary>
2665 The manual page for this <parameter>winbind trusted domains only</parameter> parameter says,
2666 <quote>This parameter is designed to allow Samba servers that are members of a Samba-controlled
2667 domain to use UNIX accounts distributed vi NIS, rsync, or LDAP as the UIDs for winbindd users
2668 in the hosts primary domain. Therefore, the user <constant>SAMBA\user1</constant> would be
2669 mapped to the account <constant>user1</constant> in <filename>/etc/passwd</filename> instead
2670 of allocating a new UID for him or her.</quote> This clearly suggests that you are trying
2671 to use this parameter inappropriately.
2675 <primary>valid users</primary>
2677 A far better solution is to use the <parameter>valid users</parameter> by specifying
2678 precisely the domain users and groups that should be permitted access to the shares. You could,
2679 for example, set the following parameters:
2682 path = /export/demodata
2683 valid users = @"Domain Users", @"OTHERDOMAIN\Domain Users"
2695 What are the benefits of using LDAP for my domain member servers?
2702 <primary>LDAP</primary>
2703 </indexterm><indexterm>
2704 <primary>benefit</primary>
2705 </indexterm><indexterm>
2706 <primary>UID</primary>
2707 </indexterm><indexterm>
2708 <primary>GID</primary>
2709 </indexterm><indexterm>
2710 <primary>Domain Controllers</primary>
2711 </indexterm><indexterm>
2712 <primary>Domain Member servers</primary>
2713 </indexterm><indexterm>
2714 <primary>copy</primary>
2715 </indexterm><indexterm>
2716 <primary>replicate</primary>
2717 </indexterm><indexterm>
2718 <primary>identity</primary>
2720 The key benefit of using LDAP is that the UID of all users and the GID of all groups
2721 are globally consistent on domain controllers as well as on domain member servers.
2722 This means that it is possible to copy/replicate files across servers without
2727 <primary>Identity resolution</primary>
2728 </indexterm><indexterm>
2729 <primary>winbind</primary>
2730 </indexterm><indexterm>
2731 <primary>IDMAP backend</primary>
2732 </indexterm><indexterm>
2733 <primary>LDAP</primary>
2734 </indexterm><indexterm>
2735 <primary>Domain Controllers</primary>
2736 </indexterm><indexterm>
2737 <primary>Domain Member</primary>
2738 <secondary>servers</secondary>
2739 </indexterm><indexterm>
2740 <primary>Posix</primary>
2741 </indexterm><indexterm>
2742 <primary>account information</primary>
2744 When use is made of account identity resolution via winbind, even when an IDMAP backend
2745 is stored in LDAP, the UID/GID on domain member servers is consistent, but differs
2746 from the ID that the user/group has on domain controllers. The winbind allocated UID/GID
2747 that is stored in LDAP (or locally) will be in the numeric range specified in the <parameter>
2748 idmap uid/gid</parameter> in the &smb.conf; file. On domain controllers, the UID/GID is
2749 that of the POSIX value assigned in the LDAP directory as part of the POSIX account information.
2759 Is proper DNS operation necessary for Samba-3 plus LDAP? If so, what must I put into
2760 my DNS configuration?
2767 <primary>DNS</primary>
2768 <secondary>configuration</secondary>
2769 </indexterm><indexterm>
2770 <primary>DNS</primary>
2771 <secondary>lookup</secondary>
2772 </indexterm><indexterm>
2773 <primary>hosts</primary>
2774 </indexterm><indexterm>
2775 <primary>/etc/nsswitch.conf</primary>
2776 </indexterm><indexterm>
2777 <primary>NSS</primary>
2778 </indexterm><indexterm>
2779 <primary>/etc/hosts</primary>
2780 </indexterm><indexterm>
2781 <primary>WINS</primary>
2782 <secondary>lookup</secondary>
2784 Samba depends on correctly functioning resolution of hostnames to their IP address. Samba
2785 makes no direct DNS lookup calls, but rather redirects all name-to-address calls via the
2786 <command>getXXXbyXXX()</command> function calls. The configuration of the <constant>hosts</constant>
2787 entry in the NSS <filename>/etc/nsswitch.conf</filename> file determines how the underlying
2788 resolution process is implemented. If the <constant>hosts</constant> entry in your NSS
2791 hosts: files dns wins
2793 this means that a hostname lookup first tries the <filename>/etc/hosts</filename>.
2794 If this fails to resolve, it attempts a DNS lookup, and if that fails, it tries a
2799 <primary>NetBIOS</primary>
2800 </indexterm><indexterm>
2801 <primary>TCP/IP</primary>
2802 </indexterm><indexterm>
2803 <primary>name resolution</primary>
2805 The addition of the WINS-based name lookup makes sense only if NetBIOS over TCP/IP has
2806 been enabled on all Windows clients. Where NetBIOS over TCP/IP has been disabled, DNS
2807 is the preferred name resolution technology. This usually makes most sense when Samba
2808 is a client of an Active Directory domain, where NetBIOS use has been disabled. In this
2809 case, the Windows 200x autoregisters all locator records it needs with its own DNS
2820 Our Windows 2003 Server Active Directory domain runs with NetBIOS disabled. Can we
2821 use Samba-3 with that configuration?
2838 <primary>net</primary>
2839 <secondary>ads</secondary>
2840 <tertiary>join</tertiary>
2841 </indexterm><indexterm>
2842 <primary>net</primary>
2843 <secondary>rpc</secondary>
2844 <tertiary>join</tertiary>
2846 When I tried to execute net ads join, I got no output. It did not work, so
2847 I think that it failed. I then executed net rpc join and that worked fine.
2848 That is okay, isn't it?
2855 <primary>Kerberos</primary>
2856 </indexterm><indexterm>
2857 <primary>authentication</primary>
2859 No. This is not okay. It means that your Samba-3 client has joined the ADS domain as
2860 a Windows NT4 client, and Samba-3 will not be using Kerberos-based authentication.
git.samba.org / samba.git / blob