# http://nplab.fh-muenster.de/groups/wiki/wiki/fb7a4/Building_Wireshark_on_SnowLeopard.html
#
-DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
+#
+# To set up a GTK3 environment
+GTK3=1
+# To build cmake
+# CMAKE=1
+#
+# To build all libraries as 32-bit libraries uncomment the following three lines.
+# export CFLAGS="$CFLAGS -arch i386"
+# export CXXFLAGS="$CXXFLAGS -arch i386"
+# export LDFLAGS="$LDFLAGS -arch i386"
+#
#
# Versions to download and install.
#
GEOIP_VERSION=1.4.8
+DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
+
#
# GNU autotools; they're provided with releases up to Snow Leopard, but
# not in later releases.
fi
#
-# The default target OS is the major version of the one we're running;
-# get that and strip off the third component.
+# If we have SDKs available, the default target OS is the major version
+# of the one we're running; get that and strip off the third component.
#
-min_osx_target=`sw_vers -productVersion | sed 's/\([[0-9]]*\).\([[0-9]]*\).[[0-9]]*/\1.\2/'`
+for i in /Developer/SDKs \
+ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
+ /Library/Developer/CommandLineTools/SDKs
+do
+ if [ -d "$i" ]
+ then
+ min_osx_target=`sw_vers -productVersion | sed 's/\([[0-9]]*\).\([[0-9]]*\).[[0-9]]*/\1.\2/'`
+ break
+ fi
+done
#
# Parse command-line flags:
exit 1
fi
-# To set up a GTK3 environment
-GTK3=1
-# To build cmake
-# CMAKE=1
-#
-# To build all libraries as 32-bit libraries uncomment the following three lines.
-# export CFLAGS="$CFLAGS -arch i386"
-# export CXXFLAGS="$CXXFLAGS -arch i386"
-# export LDFLAGS="$LDFLAGS -arch i386"
-#
-
# if no make options are present, set default options
if [ -z "$MAKE_BUILD_OPTS" ] ; then
# by default use 1.5x number of cores for parallel build
fi
#
-# Look for the SDK for the target release, and build libraries against
-# it rather than against the headers and, more importantly,
+# If we have a target release, look for its SDK, and build libraries
+# against it rather than against the headers and, more importantly,
# libraries that come with the OS, so that we don't end up with
# support libraries that only work on the OS version on which
# we built them, not earlier versions of the same release, or
# earlier releases if the minimum is earlier.
#
-for i in /Developer/SDKs \
- /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
- /Library/Developer/CommandLineTools/SDKs
-do
- if [ -d "$i"/"MacOSX$min_osx_target.sdk" ]
+if [ ! -z "$min_osx_target" ]
+then
+ for i in /Developer/SDKs \
+ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
+ /Library/Developer/CommandLineTools/SDKs
+ do
+ if [ -d "$i"/"MacOSX$min_osx_target.sdk" ]
+ then
+ SDKPATH="$i"/"MacOSX$min_osx_target.sdk"
+ break
+ fi
+ done
+
+ if [ -z "$SDKPATH" ]
then
- SDKPATH="$i"/"MacOSX$min_osx_target.sdk"
- break
+ echo "macosx-setup.sh: Couldn't find the SDK for OS X $min_osx_target" 1>&2
+ exit 1
fi
-done
-
-if [ -z "$SDKPATH" ]
-then
- echo "macosx-setup.sh: Couldn't find the SDK for OS X $min_osx_target" 1>&2
- exit 1
-fi
-#
-# Make sure there are links to /usr/local/include and /usr/local/lib
-# in the SDK's usr/local.
-#
-if [ ! -e $SDKPATH/usr/local/include ]
-then
- if [ ! -d $SDKPATH/usr/local ]
+ #
+ # Make sure there are links to /usr/local/include and /usr/local/lib
+ # in the SDK's usr/local.
+ #
+ if [ ! -e $SDKPATH/usr/local/include ]
then
- sudo mkdir $SDKPATH/usr/local
+ if [ ! -d $SDKPATH/usr/local ]
+ then
+ sudo mkdir $SDKPATH/usr/local
+ fi
+ sudo ln -s /usr/local/include $SDKPATH/usr/local/include
fi
- sudo ln -s /usr/local/include $SDKPATH/usr/local/include
-fi
-if [ ! -e $SDKPATH/usr/local/lib ]
-then
- if [ ! -d $SDKPATH/usr/local ]
+ if [ ! -e $SDKPATH/usr/local/lib ]
then
- sudo mkdir $SDKPATH/usr/local
+ if [ ! -d $SDKPATH/usr/local ]
+ then
+ sudo mkdir $SDKPATH/usr/local
+ fi
+ sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
fi
- sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
-fi
-
-#
-# Set the minimum OS version for which to build to the specified
-# minimum target OS version, so we don't, for example, end up using
-# linker features supported by the OS verson on which we're building
-# but not by the target version.
-#
-VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
-
-#
-# Compile and link against the SDK.
-#
-SDKFLAGS="-isysroot $SDKPATH"
-if [[ "$min_osx_target" == "10.5" ]]
-then
#
- # Cairo is part of Mac OS X 10.6 and later.
- # The *headers* are supplied by 10.5, but the *libraries*
- # aren't, so we have to build it if we're building for 10.5.
+ # Set the minimum OS version for which to build to the specified
+ # minimum target OS version, so we don't, for example, end up using
+ # linker features supported by the OS verson on which we're building
+ # but not by the target version.
#
- cairo_not_in_the_os=yes
+ VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
#
- # Build with older versions of the support libraries, as
- # were used on the Wireshark Leopard buildbot at one
- # point. (Most of these versions come from the About page
- # from Wireshark 1.8.6, the last build done on that buildbot;
- # the ATK version isn't reported, so this is a guess.)
- #
- # If you want to try building with newer versions of
- # the libraries, note that:
- #
- # The version of fontconfig that comes with Leopard doesn't
- # support FC_WEIGHT_EXTRABLACK, so we can't use any version
- # of Pango newer than 1.22.4.
+ # Compile and link against the SDK.
#
- # However, Pango 1.22.4 doesn't work with versions of GLib
- # after 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and
- # GLib 2.29.8 and later deprecate it (there doesn't appear to
- # be a GLib 2.29.7). That means we'd either have to patch
- # Pango not to use it (just use "const"; G_CONST_RETURN was
- # there to allow code to choose whether to use "const" or not),
- # or use GLib 2.29.6 or earlier.
- #
- # GLib 2.29.6 includes an implementation of g_bit_lock() that,
- # on x86 (32-bit and 64-bit), uses asms in a fashion
- # ("asm volatile goto") that requires GCC 4.5 or later, which
- # is later than the compilers that come with Leopard and Snow
- # Leopard. Recent versions of GLib check for that, but 2.29.6
- # doesn't, so, if you want to build GLib 2.29.6 on Leopard or
- # Snow Leopard, you would have to patch glib/gbitlock.c to do
- # what the newer versions of GLib do:
- #
- # define a USE_ASM_GOTO macro that indicates whether "asm goto"
- # can be used:
- # #if (defined (i386) || defined (__amd64__))
- # #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
- # #define USE_ASM_GOTO 1
- # #endif
- # #endif
- #
- # replace all occurrences of
- #
- # #if defined (__GNUC__) && (defined (i386) || defined (__amd64__))
- #
- # with
- #
- # #ifdef USE_ASM_GOTO
- #
- # Using GLib 2.29.6 or earlier, however, means that we can't
- # use a version of ATK later than 2.3.93, as those versions
- # don't work with GLib 2.29.6. The same applies to gdk-pixbuf;
- # versions of gdk-pixbuf after 2.24.1 won't work with GLib
- # 2.29.6.
- #
- # Then you have to make sure that what you've build doesn't
- # cause the X server that comes with Leopard to crash; at
- # least one attempt at building for Leopard did.
- #
- # At least if building on Leopard, you might also find
- # that, with various older versions of Cairo, including
- # 1.6.4 and at least some 1.8.x versions, when you try to
- # build it, the build fails because it can't find
- # png_set_longjmp_fn(). I vaguely remember dealing with that,
- # ages ago, but don't remember what I did.
- #
- GLIB_VERSION=2.16.3
- CAIRO_VERSION=1.6.4
- ATK_VERSION=1.24.0
- PANGO_VERSION=1.20.2
- GTK_VERSION=2.12.9
+ SDKFLAGS="-isysroot $SDKPATH"
- #
- # That version of GTK+ includes gdk-pixbuf.
- # XXX - base this on the version of GTK+ requested.
- #
- GDK_PIXBUF_VERSION=
+ if [[ "$min_osx_target" == "10.5" ]]
+ then
+ #
+ # Cairo is part of Mac OS X 10.6 and later.
+ # The *headers* are supplied by 10.5, but the *libraries*
+ # aren't, so we have to build it if we're building for 10.5.
+ #
+ cairo_not_in_the_os=yes
- #
- # Libgcrypt 1.5.0 fails to compile due to some problem with an
- # asm in rijndael.c, at least with i686-apple-darwin10-gcc-4.2.1
- # (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) when building
- # 32-bit.
- #
- # We try libgcrypt 1.4.3 instead, as that's what shows up in
- # the version from the Leopard buildbot.
- LIBGCRYPT_VERSION=1.4.3
+ #
+ # Build with older versions of the support libraries, as
+ # were used on the Wireshark Leopard buildbot at one
+ # point. (Most of these versions come from the About page
+ # from Wireshark 1.8.6, the last build done on that buildbot;
+ # the ATK version isn't reported, so this is a guess.)
+ #
+ # If you want to try building with newer versions of
+ # the libraries, note that:
+ #
+ # The version of fontconfig that comes with Leopard doesn't
+ # support FC_WEIGHT_EXTRABLACK, so we can't use any version
+ # of Pango newer than 1.22.4.
+ #
+ # However, Pango 1.22.4 doesn't work with versions of GLib
+ # after 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and
+ # GLib 2.29.8 and later deprecate it (there doesn't appear to
+ # be a GLib 2.29.7). That means we'd either have to patch
+ # Pango not to use it (just use "const"; G_CONST_RETURN was
+ # there to allow code to choose whether to use "const" or not),
+ # or use GLib 2.29.6 or earlier.
+ #
+ # GLib 2.29.6 includes an implementation of g_bit_lock() that,
+ # on x86 (32-bit and 64-bit), uses asms in a fashion
+ # ("asm volatile goto") that requires GCC 4.5 or later, which
+ # is later than the compilers that come with Leopard and Snow
+ # Leopard. Recent versions of GLib check for that, but 2.29.6
+ # doesn't, so, if you want to build GLib 2.29.6 on Leopard or
+ # Snow Leopard, you would have to patch glib/gbitlock.c to do
+ # what the newer versions of GLib do:
+ #
+ # define a USE_ASM_GOTO macro that indicates whether "asm goto"
+ # can be used:
+ # #if (defined (i386) || defined (__amd64__))
+ # #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ # #define USE_ASM_GOTO 1
+ # #endif
+ # #endif
+ #
+ # replace all occurrences of
+ #
+ # #if defined (__GNUC__) && (defined (i386) || defined (__amd64__))
+ #
+ # with
+ #
+ # #ifdef USE_ASM_GOTO
+ #
+ # Using GLib 2.29.6 or earlier, however, means that we can't
+ # use a version of ATK later than 2.3.93, as those versions
+ # don't work with GLib 2.29.6. The same applies to gdk-pixbuf;
+ # versions of gdk-pixbuf after 2.24.1 won't work with GLib
+ # 2.29.6.
+ #
+ # Then you have to make sure that what you've build doesn't
+ # cause the X server that comes with Leopard to crash; at
+ # least one attempt at building for Leopard did.
+ #
+ # At least if building on Leopard, you might also find
+ # that, with various older versions of Cairo, including
+ # 1.6.4 and at least some 1.8.x versions, when you try to
+ # build it, the build fails because it can't find
+ # png_set_longjmp_fn(). I vaguely remember dealing with that,
+ # ages ago, but don't remember what I did.
+ #
+ GLIB_VERSION=2.16.3
+ CAIRO_VERSION=1.6.4
+ ATK_VERSION=1.24.0
+ PANGO_VERSION=1.20.2
+ GTK_VERSION=2.12.9
- #
- # Build 32-bit while we're at it; Leopard has a bug that
- # causes some BPF functions not to work with 64-bit userland
- # code, so capturing won't work.
- #
- export CFLAGS="$CFLAGS -arch i386"
- export CXXFLAGS="$CXXFLAGS -arch i386"
- export LDFLAGS="$LDFLAGS -arch i386"
+ #
+ # That version of GTK+ includes gdk-pixbuf.
+ # XXX - base this on the version of GTK+ requested.
+ #
+ GDK_PIXBUF_VERSION=
+
+ #
+ # Libgcrypt 1.5.0 fails to compile due to some problem with an
+ # asm in rijndael.c, at least with i686-apple-darwin10-gcc-4.2.1
+ # (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) when building
+ # 32-bit.
+ #
+ # We try libgcrypt 1.4.3 instead, as that's what shows up in
+ # the version from the Leopard buildbot.
+ LIBGCRYPT_VERSION=1.4.3
+
+ #
+ # Build 32-bit while we're at it; Leopard has a bug that
+ # causes some BPF functions not to work with 64-bit userland
+ # code, so capturing won't work.
+ #
+ export CFLAGS="$CFLAGS -arch i386"
+ export CXXFLAGS="$CXXFLAGS -arch i386"
+ export LDFLAGS="$LDFLAGS -arch i386"
+ fi
fi
#
# just ignore unknown --enable/--disable and --with/--without
# options (at least they've always do so up to now).
#
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups--without-libtiff --without-libjpeg || exit 1
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups --without-libtiff --without-libjpeg || exit 1
else
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
fi
git.samba.org / metze / wireshark / wip.git / blobdiff