#include <stdlib.h>
#include <string.h>
+#include <stdio.h>
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#include <glib.h>
#include "capture_opts.h"
+#include "capture_session.h"
#include "capture_sync.h"
#include "log.h"
-#include "wsutil/file_util.h"
-
#include "capture_ifinfo.h"
#ifdef HAVE_PCAP_REMOTE
/* XXX - We parse simple text output to get our interface list. Should
* we use "real" data serialization instead, e.g. via XML? */
GList *
-capture_interface_list(int *err, char **err_str)
+capture_interface_list(int *err, char **err_str, void (*update_cb)(void))
{
int ret;
GList *if_list = NULL;
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_MESSAGE, "Capture Interface List ...");
/* Try to get our interface list */
- ret = sync_interface_list_open(&data, &primary_msg, &secondary_msg);
+ ret = sync_interface_list_open(&data, &primary_msg, &secondary_msg, update_cb);
if (ret != 0) {
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_MESSAGE, "Capture Interface List failed!");
if (err_str) {
g_free(data);
for (i = 0; raw_list[i] != NULL; i++) {
- if_parts = g_strsplit(raw_list[i], "\t", 5);
+ if_parts = g_strsplit(raw_list[i], "\t", 6);
if (if_parts[0] == NULL || if_parts[1] == NULL || if_parts[2] == NULL ||
- if_parts[3] == NULL || if_parts[4] == NULL) {
+ if_parts[3] == NULL || if_parts[4] == NULL || if_parts[5] == NULL) {
g_strfreev(if_parts);
continue;
}
continue;
}
- if_info = g_malloc0(sizeof(if_info_t));
+ if_info = g_new0(if_info_t,1);
if_info->name = g_strdup(name);
if (strlen(if_parts[1]) > 0)
if_info->vendor_description = g_strdup(if_parts[1]);
if (strlen(if_parts[2]) > 0)
if_info->friendly_name = g_strdup(if_parts[2]);
- addr_parts = g_strsplit(if_parts[3], ",", 0);
+ if_info->type = (interface_type)(int)strtol(if_parts[3], NULL, 10);
+ addr_parts = g_strsplit(if_parts[4], ",", 0);
for (j = 0; addr_parts[j] != NULL; j++) {
- if_addr = g_malloc0(sizeof(if_addr_t));
- if (inet_pton(AF_INET, addr_parts[j], &if_addr->addr.ip4_addr)) {
+ if_addr = g_new0(if_addr_t,1);
+ if (inet_pton(AF_INET, addr_parts[j], &if_addr->addr.ip4_addr) > 0) {
if_addr->ifat_type = IF_AT_IPv4;
} else if (inet_pton(AF_INET6, addr_parts[j],
- &if_addr->addr.ip6_addr)) {
+ &if_addr->addr.ip6_addr) > 0) {
if_addr->ifat_type = IF_AT_IPv6;
} else {
g_free(if_addr);
if_info->addrs = g_slist_append(if_info->addrs, if_addr);
}
}
- if (strcmp(if_parts[4], "loopback") == 0)
+ if (strcmp(if_parts[5], "loopback") == 0)
if_info->loopback = TRUE;
g_strfreev(if_parts);
g_strfreev(addr_parts);
* we use "real" data serialization instead, e.g. via XML? */
if_capabilities_t *
capture_get_if_capabilities(const gchar *ifname, gboolean monitor_mode,
- char **err_str)
+ char **err_str, void (*update_cb)(void))
{
if_capabilities_t *caps;
GList *linktype_list = NULL;
/* Try to get our interface list */
err = sync_if_capabilities_open(ifname, monitor_mode, &data,
- &primary_msg, &secondary_msg);
+ &primary_msg, &secondary_msg, update_cb);
if (err != 0) {
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_MESSAGE, "Capture Interface Capabilities failed!");
if (err_str) {
/*
* Allocate the interface capabilities structure.
*/
- caps = g_malloc(sizeof *caps);
+ caps = (if_capabilities_t *)g_malloc(sizeof *caps);
switch (*raw_list[0]) {
case '0':
continue;
}
- data_link_info = g_malloc(sizeof (data_link_info_t));
+ data_link_info = g_new(data_link_info_t,1);
data_link_info->dlt = (int) strtol(lt_parts[0], NULL, 10);
data_link_info->name = g_strdup(lt_parts[1]);
if (strcmp(lt_parts[2], "(not supported)") != 0)
remote_interface_list = g_list_append(remote_interface_list, temp);
}
#endif
-
-guint
-get_interface_type(gchar *name, gchar *description)
-{
-#if defined(__linux__)
- ws_statb64 statb;
- char *wireless_path;
-#endif
-#if defined(_WIN32)
- /*
- * Much digging failed to reveal any obvious way to get something such
- * as the SNMP MIB-II ifType value for an interface:
- *
- * http://www.iana.org/assignments/ianaiftype-mib
- *
- * by making some NDIS request.
- */
- if (description && (strstr(description,"generic dialup") != NULL ||
- strstr(description,"PPP/SLIP") != NULL )) {
- return IF_DIALUP;
- } else if (description && (strstr(description,"Wireless") != NULL ||
- strstr(description,"802.11") != NULL)) {
- return IF_WIRELESS;
- } else if (description && strstr(description,"AirPcap") != NULL ||
- strstr(name,"airpcap")) {
- return IF_AIRPCAP;
- } else if (description && strstr(description, "Bluetooth") != NULL ) {
- return IF_BLUETOOTH;
- }
-#elif defined(__APPLE__)
- /*
- * XXX - yes, fetching all the network addresses for an interface
- * gets you an AF_LINK address, of type "struct sockaddr_dl", and,
- * yes, that includes an SNMP MIB-II ifType value.
- *
- * However, it's IFT_ETHER, i.e. Ethernet, for AirPort interfaces,
- * not IFT_IEEE80211 (which isn't defined in OS X in any case).
- *
- * Perhaps some other BSD-flavored OSes won't make this mistake;
- * however, FreeBSD 7.0 and OpenBSD 4.2, at least, appear to have
- * made the same mistake, at least for my Belkin ZyDAS stick.
- *
- * XXX - this is wrong on a MacBook Air, as en0 is the AirPort
- * interface, and it's also wrong on a Mac that has no AirPort
- * interfaces and has multiple Ethernet interfaces.
- *
- * The SystemConfiguration framework is your friend here.
- * SCNetworkInterfaceGetInterfaceType() will get the interface
- * type. SCNetworkInterfaceCopyAll() gets all network-capable
- * interfaces on the system; SCNetworkInterfaceGetBSDName()
- * gets the "BSD name" of the interface, so we look for
- * an interface with the specified "BSD name" and get its
- * interface type. The interface type is a CFString, and:
- *
- * kSCNetworkInterfaceTypeIEEE80211 means IF_WIRELESS;
- * kSCNetworkInterfaceTypeBluetooth means IF_BLUETOOTH;
- * kSCNetworkInterfaceTypeModem or
- * kSCNetworkInterfaceTypePPP or
- * maybe kSCNetworkInterfaceTypeWWAN means IF_DIALUP
- */
- if (strcmp(name, "en1") == 0) {
- return IF_WIRELESS;
- }
- /*
- * XXX - PPP devices have names beginning with "ppp" and an IFT_ of
- * IFT_PPP, but they could be dial-up, or PPPoE, or mobile phone modem,
- * or VPN, or... devices. One might have to dive into the bowels of
- * IOKit to find out.
- */
-
- /*
- * XXX - there's currently no support for raw Bluetooth capture,
- * and IP-over-Bluetooth devices just look like fake Ethernet
- * devices. There's also Bluetooth modem support, but that'll
- * probably just give you a device that looks like a PPP device.
- */
-#elif defined(__linux__)
- /*
- * Look for /sys/class/net/{device}/wireless.
- */
- wireless_path = g_strdup_printf("/sys/class/net/%s/wireless", name);
- if (wireless_path != NULL) {
- if (ws_stat64(wireless_path, &statb) == 0) {
- g_free(wireless_path);
- return IF_WIRELESS;
- }
- g_free(wireless_path);
- }
- /*
- * Bluetooth devices.
- *
- * XXX - this is for raw Bluetooth capture; what about IP-over-Bluetooth
- * devices?
- */
- if ( strstr(name,"bluetooth") != NULL) {
- return IF_BLUETOOTH;
- }
-
- /*
- * USB devices.
- */
- if ( strstr(name,"usbmon") != NULL ) {
- return IF_USB;
- }
-#endif
- /*
- * Bridge, NAT, or host-only interfaces on VMWare hosts have the name
- * vmnet[0-9]+ or VMnet[0-9+ on Windows. Guests might use a native
- * (LANCE or E1000) driver or the vmxnet driver. These devices have an
- * IFT_ of IFT_ETHER, so we have to check the name.
- */
- if ( g_ascii_strncasecmp(name, "vmnet", 5) == 0) {
- return IF_VIRTUAL;
- }
-
- if ( g_ascii_strncasecmp(name, "vmxnet", 6) == 0) {
- return IF_VIRTUAL;
- }
-
- if (description && strstr(description, "VMware") != NULL ) {
- return IF_VIRTUAL;
- }
-
- return IF_WIRED;
-}
#endif /* HAVE_LIBPCAP */