Contents:
-1 - Building ethereal
+1 - Building wireshark
2 - Building GTK+/GLib with HP's C compiler
3 - nettl support
4 - libpcap on HP-UX
5 - HP-UX patches to fix packet capture problems
-1 - Building ethereal
+1 - Building wireshark
The Software Porting And Archive Centre for HP-UX, at
(with mirrors in various countries, listed on the Centre's home page;
you may want to choose a mirror closer to you) has ported versions, in
-both source and binary form, for Ethereal, as well as for the libpcap,
+both source and binary form, for Wireshark, as well as for the libpcap,
GLib, GTK+, and zlib libraries that it uses.
The changes they've made appear largely to be compile option changes; if
-you've downloaded the source to the latest version of Ethereal (the
+you've downloaded the source to the latest version of Wireshark (the
version on the Centre's site may not necessarily be the latest version),
it should be able to compile, perhaps with those changes.
64-bit integral data types on 32-bit platforms; the "-Ae" flag must be
supplied to enable extensions such as that.
-Ethereal's "configure" script automatically includes that flag if it
+Wireshark's "configure" script automatically includes that flag if it
detects that the native compiler is being used on HP-UX; however, the
configure scripts for GTK+ and GLib don't do so, which means that 64-bit
integer support won't be enabled.
-This may prevent some parts of Ethereal from compiling; in order to get
+This may prevent some parts of Wireshark from compiling; in order to get
64-bit integer support in GTK+/GLib, edit all the Makefiles for GTK+ and
GLib, as generated by the GTK+ and GLib "configure" scripts, to add
"-Ae" to all "CFLAGS = " definitions found in those Makefiles. (If a
3 - nettl support
-nettl is used on HP-UX to trace various streams based subsystems. Ethereal
-can read nettl files containing IP frames (NS_LS_IP subsystem) and LAPB
-frames (SX25L2 subsystem).
-It has been tested with files generated on HP-UX 9.04 and 10.20.
+nettl is used on HP-UX to trace various streams based subsystems. Wireshark
+can read nettl files containing raw IP frames (NS_LS_IP, NS_LS_TCP,
+NS_LS_UDP, NS_LS_ICMP subsystems), all ethernet/tokenring/fddi driver
+level frames (such as BTLAN, BASE100, GELAN, IGELAN subsystems) and LAPB
+frames (SX25L2 subsystem). Use "ioscan -kfClan" to see the driver
+names and compare that to /etc/nettlgen.conf to find the nettl subsystem
+name for your particular release.
+
+It has been tested with files generated on HP-UX 9.04, 10.20, and 11.x.
Use the following commands to generate a trace (cf. nettl(1M)):
-# IP capture. 0x30000000 means PDU in and PDU out :
-nettl -tn 0x30000000 -e NS_LS_IP -f tracefile
+# IP capture:
+nettl -tn pduin pduout -e NS_LS_IP -f tracefile
+# Driver level capture. Replace btlan with the name of your interface:
+nettl -tn pduin pduout -e btlan -f tracefile
# X25 capture. You must specify an interface :
-nettl -tn 0x30000000 -e SX25l2 -d /dev/x25_0 -f tracefile
-# stop capture. subsystem is NS_LS_IP or SX25L2 :
+nettl -tn pduin pduout -e SX25l2 -d /dev/x25_0 -f tracefile
+# stop capture. subsystem is NS_LS_IP, btlan, SX25L2 :
nettl -tf -e subsystem
-One may be able to specify "-tn pduin pduout" rather than
-"-tn 0x30000000"; the nettl man page for HP-UX 10.30 implies that it
-should work.
+You may have to use "-tn 0x30000000" instead of "-tn pduin pduout"
+on old versions of 10.20 and 9.04.
4 - libpcap on HP-UX
-If you want to use Ethereal to capture packets, you will have to install
+If you want to use Wireshark to capture packets, you will have to install
libpcap; binary distributions are, as noted above, available from the
Software Porting And Archive Centre for HP-UX, as well as source code.
5 - HP-UX patches to fix packet capture problems
-Note that packet-capture programs such as Ethereal/Tethereal or tcpdump
+Note that packet-capture programs such as Wireshark/TShark or tcpdump
may, on HP-UX, not be able to see packets sent from the machine on which
-they're running. Some articles on groups.google.com discussing this
-are:
+they're running. Make sure you have a recent "LAN Cummulative/DLPI" patch
+installed.
+
+Some articles on groups.google.com discussing this are:
http://groups.google.com/groups?selm=82ld3v%2480i%241%40mamenchi.zrz.TU-Berlin.DE
An additional note, from Jost Martin, for HP-UX 10.20:
- Q: How do I get ethereral on HPUX to capture the _outgoing_ packets
+ Q: How do I get wireshark on HPUX to capture the _outgoing_ packets
of an interface
A: You need to get PHNE_20892,PHNE_20725 and PHCO_10947 (or
newer, this is as of 4.4.00) and its dependencies. Then you can
- enable the feature as descibed below:
+ enable the feature as described below:
Patch Name: PHNE_20892
Patch Description: s700 10.20 PCI 100Base-T cumulative patch
git.samba.org / metze / wireshark / wip.git / blobdiff