1 The TAP system in Wireshark is a powerful and flexible mechanism to get event
2 driven notification on packets matching certain protocols and/or filters.
3 In order to use the tapping system, very little knowledge of Wireshark
4 internals are required.
6 As examples on how to use the tap system see the implementation of
7 tap-rpcstat.c (tshark version)
8 gtk/rpc_stat.c (gtk-wireshark version)
10 If all you need is to keep some counters, there's the stats_tree API,
11 which offers a simple way to make a GUI and tshark tap-listener; see
12 README.stats_tree. However, keep reading, as you'll need much of what's
15 The tap system consists of two parts:
16 1, code in the actual dissectors to allow tapping data from that particular
17 protocol dissector, and
18 2, event driven code in an extension such as tap-rpcstat.c that registers
19 a tap listener and processes received data.
23 So you want to hack together a tap application?
28 First you must decide which protocol you are interested in writing a tap
29 application for and check if that protocol has already got a tap installed
31 If it already has a tap device installed then you don't have to do anything.
32 If not, then you have to add a tap but don't worry, this is extremely easy to
33 do and is done in four easy steps;
34 (see packet-rpc.c and search for tap for an example)
36 1, We need tap.h so just add '#include "tap.h"' (preceded by packet.h) to
39 2, We need a tap handler so just add 'static int <protocol>_tap = -1;'
41 3, Down in proto_register_<protocol>() you need to add
42 '<protocol>_tap = register_tap("<protocol>");'
44 4, In the actual dissector for that protocol, after any child dissectors
45 have returned, just add 'tap_queue_packet(<protocol>_tap, pinfo, <pointer>);'
47 <pointer> is used if the tap has any special additional data to provide to the
48 tap listeners. What this points to is dependent on the protocol that is tapped,
49 or if there are no useful extra data to provide just specify NULL. For
50 packet-rpc.c what we specify there is the persistent structure 'rpc_call' which
51 contains lots of useful information from the rpc layer that a listener might
58 (see tap-rpcstat.c as an example)
59 Interfacing your application is not that much harder either.
60 Only 3 callbacks and two functions.
63 The two functions to start or stop tapping are
65 register_tap_listener(const char *tapname, void *tapdata, const char *fstring,
67 void (*reset)(void *tapdata),
68 gboolean (*packet)(void *tapdata, packet_info *pinfo, epan_dissect_t *edt, const void *data),
69 void (*draw)(void *tapdata));
71 remove_tap_listener(void *tapdata);
74 remove_tap_listener(void *tapdata)
75 This function is used to deregister and stop a tap listener.
77 register_tap_listener() is used to register an instance of a tap application
81 is the name of the tap we want to listen to. I.e. the name used in
85 is the instance identifier. The tap system uses the value of this
86 pointer to distinguish between different instances of a tap.
87 Just make sure that it is unique by letting it be the pointer to a struct
88 holding all state variables. If you want to allow multiple concurrent
89 instances, just put ALL state variables inside a struct allocated by
90 g_malloc() and use that pointer.
91 (tap-rpcstat.c use this technique to allow multiple simultaneous instances)
94 is a pointer to a filter string.
95 If this is NULL, then the tap system will provide ALL packets passing the
96 tapped protocol to your listener.
97 If you specify a filter string here the tap system will first try
98 to apply this string to the packet and then only pass those packets that
99 matched the filter to your listener.
100 The syntax for the filter string is identical to normal display filters.
102 NOTE: Specifying filter strings will have a significant performance impact
103 on your application and Wireshark. If possible it is MUCH better to take
104 unfiltered data and just filter it yourself in the packet-callback than
105 to specify a filter string.
106 ONLY use a filter string if no other option exist.
109 is a set of flags for the tap listener. The flags that can be set are:
111 TL_REQUIRES_PROTO_TREE
113 set if your tap listener "packet" routine requires a protocol
114 tree to be built. It will require a protocol tree to be
117 1) it looks at the protocol tree in edt->tree
121 2) the tap-specific data passed to it is constructed only if
122 the protocol tree is being built.
126 set if your tap listener "packet" routine requires the column
127 strings to be constructed.
129 If no flags are needed, use TL_REQUIRES_NOTHING.
131 void (*reset)(void *tapdata)
132 This callback is called whenever Wireshark wants to inform your
133 listener that it is about to start [re]reading a capture file or a new capture
134 from an interface and that your application should reset any state it has
135 in the *tapdata instance.
137 gboolean (*packet)(void *tapdata, packet_info *pinfo, epan_dissect_t *edt, const void *data)
138 This callback is used whenever a new packet has arrived at the tap and that
139 it has passed the filter (if there were a filter).
140 The *data structure type is specific to each tap.
141 This function returns an gboolean and it should return
142 TRUE, if the data in the packet caused state to be updated
143 (and thus a redraw of the window would later be required)
144 FALSE, if we don't need to redraw the window.
145 NOTE: that (*packet) should be as fast and efficient as possible. Use this
146 function ONLY to store data for later and do the CPU-intensive processing
147 or GUI updates down in (*draw) instead.
150 void (*draw)(void *tapdata)
151 This callback is used when Wireshark wants your application to redraw its
152 output. It will usually not be called unless your application has received
153 new data through the (*packet) callback.
154 On some ports of Wireshark (gtk2) (*draw) will be called asynchronously
155 from a separate thread up to once every 2-3 seconds.
156 On other ports it might only be called once when the capture is finished
157 or the file has been [re]read completely.
161 So, create three callbacks:
162 1, reset to reset the state variables in the structure passed to it.
163 2, packet to update these state variables.
164 3, draw to take these state variables and draw them on the screen.
166 then just make Wireshark call register_tap_listener() when you want to tap
167 and call remove_tap_listener() when you are finished.
170 WHEN DO TAP LISTENERS GET CALLED?
171 ===================================
172 Tap listeners are only called when Wireshark reads a new capture for
173 the first time or whenever Wireshark needs to rescan/redissect
175 Redissection occurs when you apply a new display filter or if you
176 change and Save/Apply a preference setting that might affect how
177 packets are dissected.
178 After each individual packet has been completely dissected and all
179 dissectors have returned, all the tap listeners that have been flagged
180 to receive tap data during the dissection of the frame will be called in
182 The order in which the tap listeners will be called is not defined.
183 Not until all tap listeners for the frame has been called and returned
184 will Wireshark continue to dissect the next packet.
185 This is why it is important to make the *_packet() callbacks execute as
186 quickly as possible, else we create an extra delay until the next packet
189 Keep in mind though: for some protocols, such as IP, the protocol can
190 appear multiple times in different layers inside the same packet.
191 For example, IP encapsulated over IP which will call the ip dissector
192 twice for the same packet.
193 IF the tap is going to return private data using the last parameter to
194 tap_queue_packet() and IF the protocol can appear multiple times inside the
195 same packet, you will have to make sure that each instance of
196 tap_queue_packet() is using its own instance of private struct variable
197 so they don't overwrite each other.
199 See packet-ip.c which has a simple solution to the problem. It creates
200 a unique instance of the IP header using wmem_alloc().
201 Previous versions used a static struct of 4 instances of the IP header
202 struct and cycled through them each time the dissector was called. (4
203 was just a number taken out of the blue but it should be enough for most
204 cases.) This would fail if there were more than 4 IP headers in the same
205 packet, but that was unlikely.
210 Of course, there is nothing that forces you to make (*draw) draw stuff
212 You can hand register_tap_listener() NULL for both (*draw) and (*reset)
213 (well also for (*packet) but that would be a very boring extension).
215 Perhaps you want an extension that will execute a certain command
216 every time it sees a certain packet?
218 gboolean packet(void *tapdata,...) {
224 register_tap_listener("tcp", struct, "tcp.port==57", NULL, packet, NULL);
226 Let struct contain an email address?
227 Then you have something simple that will make Wireshark send an email
228 out automagically for each and every time it dissects
229 a packet containing TCP traffic to port 57.
230 Please put in some rate limitation if you do this.
232 Let struct contain a command line and make (*packet) execute it?
233 The possibilities are rather large.
237 See tap-rpcstat.c for an example
238 See tap.c as well. It contains lots of comments and descriptions on the tap