2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 /* logged when starting the various Samba daemons */
31 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2007"
34 #if defined(LARGE_SMB_OFF_T)
35 #define BUFFER_SIZE (128*1024)
36 #else /* no large readwrite possible */
37 #define BUFFER_SIZE (0xFFFF)
40 #define SAFETY_MARGIN 1024
41 #define LARGE_WRITEX_HDR_SIZE 65
44 #define DGRAM_PORT 138
47 #define SMB_PORTS "445 139"
49 #define Undefined (-1)
57 #ifndef DEF_CREATE_MASK
58 #define DEF_CREATE_MASK (0755)
61 /* string manipulation flags - see clistr.c and srvstr.c */
62 #define STR_TERMINATE 1
66 #define STR_NOALIGN 16
67 #define STR_TERMINATE_ASCII 128
69 /* how long to wait for secondary SMB packets (milli-seconds) */
70 #define SMB_SECONDARY_WAIT (60*1000)
75 /* this defines the error codes that receive_smb can put in smb_read_error */
76 #define READ_TIMEOUT 1
79 #define WRITE_ERROR 4 /* This error code can go into the client smb_rw_error. */
80 #define READ_BAD_SIG 5
81 #define DO_NOT_DO_TDIS 6 /* cli_close_connection() check for this when smbfs wants to keep tree connected */
83 #define DIR_STRUCT_SIZE 43
85 /* these define the attribute byte as seen by DOS */
86 #define aRONLY (1L<<0) /* 0x01 */
87 #define aHIDDEN (1L<<1) /* 0x02 */
88 #define aSYSTEM (1L<<2) /* 0x04 */
89 #define aVOLID (1L<<3) /* 0x08 */
90 #define aDIR (1L<<4) /* 0x10 */
91 #define aARCH (1L<<5) /* 0x20 */
102 #define DOS_OPEN_RDONLY 0
103 #define DOS_OPEN_WRONLY 1
104 #define DOS_OPEN_RDWR 2
105 #define DOS_OPEN_EXEC 3
106 #define DOS_OPEN_FCB 0xF
108 /* define shifts and masks for share and open modes. */
109 #define OPENX_MODE_MASK 0xF
110 #define DENY_MODE_SHIFT 4
111 #define DENY_MODE_MASK 0x7
112 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
113 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
114 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
115 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
117 /* Sync on open file (not sure if used anymore... ?) */
118 #define FILE_SYNC_OPENMODE (1<<14)
119 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
121 /* open disposition values */
122 #define OPENX_FILE_EXISTS_FAIL 0
123 #define OPENX_FILE_EXISTS_OPEN 1
124 #define OPENX_FILE_EXISTS_TRUNCATE 2
126 /* mask for open disposition. */
127 #define OPENX_FILE_OPEN_MASK 0x3
129 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
130 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
132 /* The above can be OR'ed with... */
133 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
134 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
138 typedef union unid_t {
144 * SMB UCS2 (16-bit unicode) internal type.
145 * smb_ucs2_t is *always* in little endian format.
148 typedef uint16 smb_ucs2_t;
150 /* ucs2 string types. */
151 typedef smb_ucs2_t wpstring[PSTRING_LEN];
152 typedef smb_ucs2_t wfstring[FSTRING_LEN];
154 #ifdef WORDS_BIGENDIAN
160 /* turn a 7 bit character into a ucs2 character */
161 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
163 /* return an ascii version of a ucs2 character */
164 #define UCS2_TO_CHAR(c) (((c) >> UCS2_SHIFT) & 0xff)
166 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
167 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
168 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
170 /* Large data type for manipulating uint32 unicode codepoints */
171 typedef uint32 codepoint_t;
172 #define INVALID_CODEPOINT ((codepoint_t)-1)
174 /* pipe string names */
175 #define PIPE_LANMAN "\\PIPE\\LANMAN"
176 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
177 #define PIPE_SAMR "\\PIPE\\samr"
178 #define PIPE_WINREG "\\PIPE\\winreg"
179 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
180 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
181 #define PIPE_NTLSA "\\PIPE\\ntlsa"
182 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
183 #define PIPE_LSASS "\\PIPE\\lsass"
184 #define PIPE_LSARPC "\\PIPE\\lsarpc"
185 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
186 #define PIPE_NETDFS "\\PIPE\\netdfs"
187 #define PIPE_ECHO "\\PIPE\\rpcecho"
188 #define PIPE_SHUTDOWN "\\PIPE\\initshutdown"
189 #define PIPE_EPM "\\PIPE\\epmapper"
190 #define PIPE_SVCCTL "\\PIPE\\svcctl"
191 #define PIPE_EVENTLOG "\\PIPE\\eventlog"
193 #define PIPE_NETLOGON_PLAIN "\\NETLOGON"
196 #define PI_LSARPC_DS 1
198 #define PI_NETLOGON 3
205 #define PI_SHUTDOWN 10
207 #define PI_EVENTLOG 12
209 #define PI_MAX_PIPES 14
211 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
212 typedef uint64_t NTTIME;
215 /* Allowable account control bits */
216 #define ACB_DISABLED 0x00000001 /* 1 = User account disabled */
217 #define ACB_HOMDIRREQ 0x00000002 /* 1 = Home directory required */
218 #define ACB_PWNOTREQ 0x00000004 /* 1 = User password not required */
219 #define ACB_TEMPDUP 0x00000008 /* 1 = Temporary duplicate account */
220 #define ACB_NORMAL 0x00000010 /* 1 = Normal user account */
221 #define ACB_MNS 0x00000020 /* 1 = MNS logon user account */
222 #define ACB_DOMTRUST 0x00000040 /* 1 = Interdomain trust account */
223 #define ACB_WSTRUST 0x00000080 /* 1 = Workstation trust account */
224 #define ACB_SVRTRUST 0x00000100 /* 1 = Server trust account (BDC) */
225 #define ACB_PWNOEXP 0x00000200 /* 1 = User password does not expire */
226 #define ACB_AUTOLOCK 0x00000400 /* 1 = Account auto locked */
228 /* only valid for > Windows 2000 */
229 #define ACB_ENC_TXT_PWD_ALLOWED 0x00000800 /* 1 = Text password encryped */
230 #define ACB_SMARTCARD_REQUIRED 0x00001000 /* 1 = Smart Card required */
231 #define ACB_TRUSTED_FOR_DELEGATION 0x00002000 /* 1 = Trusted for Delegation */
232 #define ACB_NOT_DELEGATED 0x00004000 /* 1 = Not delegated */
233 #define ACB_USE_DES_KEY_ONLY 0x00008000 /* 1 = Use DES key only */
234 #define ACB_DONT_REQUIRE_PREAUTH 0x00010000 /* 1 = Preauth not required */
235 #define ACB_PWEXPIRED 0x00020000 /* 1 = Password is expired */
236 #define ACB_NO_AUTH_DATA_REQD 0x00080000 /* 1 = No authorization data required */
238 #define MAX_HOURS_LEN 32
241 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
244 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
248 SID_NAME_USE_NONE = 0,
249 SID_NAME_USER = 1, /* user */
250 SID_NAME_DOM_GRP, /* domain group */
251 SID_NAME_DOMAIN, /* domain sid */
252 SID_NAME_ALIAS, /* local group */
253 SID_NAME_WKN_GRP, /* well-known group */
254 SID_NAME_DELETED, /* deleted account: needed for c2 rating */
255 SID_NAME_INVALID, /* invalid account */
256 SID_NAME_UNKNOWN, /* unknown sid type */
257 SID_NAME_COMPUTER /* sid for a computer */
260 #define LOOKUP_NAME_ISOLATED 1 /* Look up unqualified names */
261 #define LOOKUP_NAME_REMOTE 2 /* Ask others */
262 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED|LOOKUP_NAME_REMOTE)
264 #define LOOKUP_NAME_GROUP 4 /* (unused) This is a NASTY hack for valid users = @foo
265 * where foo also exists in as user. */
268 * @brief Security Identifier
270 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
272 typedef struct dom_sid {
273 uint8 sid_rev_num; /**< SID revision number */
274 uint8 num_auths; /**< Number of sub-authorities */
275 uint8 id_auth[6]; /**< Identifier Authority */
277 * Pointer to sub-authorities.
279 * @note The values in these uint32's are in *native* byteorder, not
280 * neccessarily little-endian...... JRA.
282 uint32 sub_auths[MAXSUBAUTHS];
285 #define dom_sid2 dom_sid
286 #define dom_sid28 dom_sid
296 ID_TYPE_NOT_SPECIFIED = 0,
309 enum id_mapping status;
312 #include "librpc/ndr/misc.h"
313 #include "librpc/ndr/security.h"
314 #include "librpc/ndr/libndr.h"
315 #include "librpc/gen_ndr/wkssvc.h"
317 struct lsa_dom_info {
325 struct lsa_name_info {
327 enum lsa_SidType type;
332 /* Some well-known SIDs */
333 extern const DOM_SID global_sid_World_Domain;
334 extern const DOM_SID global_sid_World;
335 extern const DOM_SID global_sid_Creator_Owner_Domain;
336 extern const DOM_SID global_sid_NT_Authority;
337 extern const DOM_SID global_sid_System;
338 extern const DOM_SID global_sid_NULL;
339 extern const DOM_SID global_sid_Authenticated_Users;
340 extern const DOM_SID global_sid_Network;
341 extern const DOM_SID global_sid_Creator_Owner;
342 extern const DOM_SID global_sid_Creator_Group;
343 extern const DOM_SID global_sid_Anonymous;
344 extern const DOM_SID global_sid_Builtin;
345 extern const DOM_SID global_sid_Builtin_Administrators;
346 extern const DOM_SID global_sid_Builtin_Users;
347 extern const DOM_SID global_sid_Builtin_Guests;
348 extern const DOM_SID global_sid_Builtin_Power_Users;
349 extern const DOM_SID global_sid_Builtin_Account_Operators;
350 extern const DOM_SID global_sid_Builtin_Server_Operators;
351 extern const DOM_SID global_sid_Builtin_Print_Operators;
352 extern const DOM_SID global_sid_Builtin_Backup_Operators;
353 extern const DOM_SID global_sid_Builtin_Replicator;
354 extern const DOM_SID global_sid_Builtin_PreWin2kAccess;
355 extern const DOM_SID global_sid_Unix_Users;
356 extern const DOM_SID global_sid_Unix_Groups;
359 * The complete list of SIDS belonging to this user.
360 * Created when a vuid is registered.
361 * The definition of the user_sids array is as follows :
363 * token->user_sids[0] = primary user SID.
364 * token->user_sids[1] = primary group SID.
365 * token->user_sids[2..num_sids] = supplementary group SIDS.
368 #define PRIMARY_USER_SID_INDEX 0
369 #define PRIMARY_GROUP_SID_INDEX 1
371 typedef struct nt_user_token {
377 typedef struct _unix_token {
384 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
385 typedef struct time_info {
389 /* Structure used when SMBwritebmpx is active */
391 size_t wr_total_written; /* So we know when to discard this */
393 int32 wr_errclass; /* Cached errors */
394 int32 wr_error; /* Cached errors */
395 NTSTATUS wr_status; /* Cached errors */
396 BOOL wr_mode; /* write through mode) */
397 BOOL wr_discard; /* discard all further data */
400 typedef struct write_cache {
409 smb_ucs2_t *origname;
410 smb_ucs2_t *filename;
411 SMB_STRUCT_STAT *statinfo;
414 #include "fake_file.h"
419 SMB_BIG_UINT position_information;
421 uint32 private_options; /* NT Create options, but we only look at
422 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
423 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
424 * for print files *only*, where
425 * DELETE_ON_CLOSE is not stored in the share
428 unsigned long file_id;
431 struct messaging_context;
432 struct event_context;
436 struct share_mode_entry;
439 struct vfs_fsp_data {
440 struct vfs_fsp_data *next;
441 struct vfs_handle_struct *owner;
442 /* NOTE: This structure contains two pointers so that we can guarantee
443 * that the end of the structure is always both 4-byte and 8-byte aligned.
447 /* the basic packet size, assuming no words or bytes */
450 struct notify_change {
455 struct notify_mid_map;
458 struct notify_change_request;
459 struct sys_notify_backend;
460 struct sys_notify_context {
461 struct event_context *ev;
462 struct connection_struct *conn;
463 void *private_data; /* For use by the system backend */
466 struct notify_change_buf {
468 * If no requests are pending, changes are queued here. Simple array,
473 * num_changes == -1 means that we have got a catch-all change, when
474 * asked we just return NT_STATUS_OK without specific changes.
477 struct notify_change *changes;
480 * If no changes are around requests are queued here. Using a linked
481 * list, because we have to append at the end and delete from the top.
483 struct notify_change_request *requests;
486 typedef struct files_struct {
487 struct files_struct *next, *prev;
489 struct connection_struct *conn;
490 struct fd_handle *fh;
491 unsigned int num_smb_operations;
492 uint16 rap_print_jobid;
495 SMB_BIG_UINT initial_allocation_size; /* Faked up initial allocation on disk. */
499 write_bmpx_struct *wbmpx_ptr;
501 struct timeval open_time;
502 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
503 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
504 BOOL pending_modtime_owner;
505 struct timespec pending_modtime;
506 struct timespec last_write_time;
508 int sent_oplock_break;
509 struct timed_event *oplock_timeout;
510 struct lock_struct last_lock_failure;
511 int current_lock_count; /* Count the number of outstanding locks and pending locks. */
513 struct share_mode_entry *pending_break_messages;
514 int num_pending_break_messages;
523 BOOL is_sendfile_capable;
524 BOOL aio_write_behind;
526 BOOL initial_delete_on_close; /* Only set at NTCreateX if file was created. */
530 struct vfs_fsp_data *vfs_extension;
531 FAKE_FILE_HANDLE *fake_file_handle;
533 struct notify_change_buf *notify;
536 #include "ntquotas.h"
537 #include "sysquotas.h"
539 /* used to hold an arbitrary blob of data */
540 typedef struct data_blob_ {
543 void (*free)(struct data_blob_ *data_blob);
547 * Structure used to keep directory state information around.
548 * Used in NT change-notify code.
556 struct vuid_cache_entry {
563 unsigned int entries;
564 struct vuid_cache_entry array[VUID_CACHE_SIZE];
570 } name_compare_entry;
573 struct trans_state *next, *prev;
577 uint32 max_param_return;
578 uint32 max_data_return;
579 uint32 max_setup_return;
581 uint8 cmd; /* SMBtrans or SMBtrans2 */
583 fstring name; /* for trans requests */
584 uint16 call; /* for trans2 and nttrans requests */
586 BOOL close_on_completion;
589 unsigned int setup_count;
592 size_t received_data;
593 size_t received_param;
602 /* Include VFS stuff */
604 struct security_descriptor_info;
606 #include "smb_acls.h"
609 struct dfree_cached_info {
610 time_t last_dfree_time;
611 SMB_BIG_UINT dfree_ret;
619 struct share_params {
623 struct share_iterator {
627 typedef struct connection_struct {
628 struct connection_struct *next, *prev;
629 TALLOC_CTX *mem_ctx; /* long-lived memory context for things hanging off this struct. */
630 unsigned cnum; /* an index passed over the wire */
631 struct share_params *params;
634 struct vuid_cache vuid_cache;
635 struct dptr_struct *dirptr;
638 BOOL read_only; /* Attributes for the current user of the share. */
639 BOOL admin_user; /* Attributes for the current user of the share. */
644 struct vfs_ops vfs; /* Filesystem operations */
645 struct vfs_ops vfs_opaque; /* OPAQUE Filesystem operations */
646 struct vfs_handle_struct *vfs_handles; /* for the new plugins */
648 char *user; /* name of user who *opened* this connection */
649 uid_t uid; /* uid of user who *opened* this connection */
650 gid_t gid; /* gid of user who *opened* this connection */
651 char client_address[18]; /* String version of client IP address. */
653 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
655 /* following groups stuff added by ih */
657 /* This groups info is valid for the user that *opened* the connection */
660 NT_USER_TOKEN *nt_user_token;
663 time_t lastused_count;
666 unsigned int num_smb_operations; /* Count of smb operations on this tree. */
668 /* Semantics requested by the client or forced by the server config. */
671 BOOL short_case_preserve;
673 /* Semantics provided by the underlying filesystem. */
676 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
677 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
678 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
679 name_compare_entry *aio_write_behind_list; /* Per-share list of files to use aio write behind on. */
680 struct dfree_cached_info *dfree_info;
681 struct trans_state *pending_trans;
682 struct notify_context *notify_ctx;
685 struct current_user {
686 connection_struct *conn;
689 NT_USER_TOKEN *nt_user_token;
692 /* Defines for the sent_oplock_break field above. */
693 #define NO_BREAK_SENT 0
694 #define BREAK_TO_NONE_SENT 1
695 #define LEVEL_II_BREAK_SENT 2
698 fstring smb_name; /* user name from the client */
699 fstring unix_name; /* unix user name of a validated user */
700 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
701 fstring domain; /* domain that the client specified */
704 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
706 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
707 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
709 typedef struct _print_queue_struct {
710 int job; /* normally the UNIX jobid -- see note in
711 printing.c:traverse_fn_delete() */
719 } print_queue_struct;
721 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
727 } print_status_struct;
729 /* used for server information: client, nameserv and ipc */
730 struct server_info_struct {
734 fstring domain; /* used ONLY in ipc.c NOT namework.c */
735 BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
738 /* used for network interfaces */
740 struct interface *next, *prev;
742 struct in_addr bcast;
743 struct in_addr nmask;
746 /* Internal message queue for deferred opens. */
747 struct pending_message_list {
748 struct pending_message_list *next, *prev;
749 struct timeval request_time; /* When was this first issued? */
750 struct timeval end_time; /* When does this time out? */
752 DATA_BLOB private_data;
755 #define SHARE_MODE_FLAG_POSIX_OPEN 0x1
756 #define SHARE_MODE_ALLOW_INITIAL_DELETE_ON_CLOSE 0x2
758 /* struct returned by get_share_modes */
759 struct share_mode_entry {
760 struct process_id pid;
763 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
764 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
765 uint32 private_options; /* NT Create options, but we only look at
766 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
767 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
768 * smbstatus and swat */
772 unsigned long share_file_id;
773 uint32 uid; /* uid of file opener. */
774 uint16 flags; /* See SHARE_MODE_XX above. */
777 /* oplock break message definition - linearization of share_mode_entry.
780 0 struct process_id pid 4
783 8 uint32 access_mask 4
784 12 uint32 share_access 4
785 16 uint32 private_options 4
787 24 uint32 time usec 4
788 28 SMB_DEV_T dev 8 bytes.
789 36 SMB_INO_T inode 8 bytes
790 44 unsigned long file_id 4 bytes
791 48 uint32 uid 4 bytes
792 52 uint16 flags 2 bytes
796 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 54
798 struct share_mode_lock {
799 const char *servicepath; /* canonicalized. */
800 const char *filename;
804 struct share_mode_entry *share_modes;
805 UNIX_USER_TOKEN *delete_token;
806 BOOL delete_on_close;
812 * Internal structure of locking.tdb share mode db.
813 * Used by locking.c and libsmbsharemodes.c
816 struct locking_data {
819 int num_share_mode_entries;
820 BOOL delete_on_close;
821 uint32 delete_token_size; /* Only valid if either of
822 the two previous fields
825 struct share_mode_entry dummy; /* Needed for alignment. */
827 /* The following four entries are implicit
828 struct share_mode_entry modes[num_share_mode_entries];
829 char unix_token[delete_token_size] (divisible by 4).
835 /* Used to store pipe open records for NetFileEnum() */
837 struct pipe_open_rec {
838 struct process_id pid;
845 #define NT_HASH_LEN 16
846 #define LM_HASH_LEN 16
848 /* Password history contants. */
849 #define PW_HISTORY_SALT_LEN 16
850 #define SALTED_MD5_HASH_LEN 16
851 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
852 #define MAX_PW_HISTORY_LEN 24
855 * Flags for account policy.
857 #define AP_MIN_PASSWORD_LEN 1
858 #define AP_PASSWORD_HISTORY 2
859 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
860 #define AP_MAX_PASSWORD_AGE 4
861 #define AP_MIN_PASSWORD_AGE 5
862 #define AP_LOCK_ACCOUNT_DURATION 6
863 #define AP_RESET_COUNT_TIME 7
864 #define AP_BAD_ATTEMPT_LOCKOUT 8
865 #define AP_TIME_TO_LOGOUT 9
866 #define AP_REFUSE_MACHINE_PW_CHANGE 10
869 * Flags for local user manipulation.
872 #define LOCAL_ADD_USER 0x1
873 #define LOCAL_DELETE_USER 0x2
874 #define LOCAL_DISABLE_USER 0x4
875 #define LOCAL_ENABLE_USER 0x8
876 #define LOCAL_TRUST_ACCOUNT 0x10
877 #define LOCAL_SET_NO_PASSWORD 0x20
878 #define LOCAL_SET_PASSWORD 0x40
879 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
880 #define LOCAL_INTERDOM_ACCOUNT 0x100
881 #define LOCAL_AM_ROOT 0x200 /* Act as root */
883 /* key and data in the connections database - used in smbstatus and smbd */
884 struct connections_key {
885 struct process_id pid;
890 struct connections_data {
892 struct process_id pid;
896 char servicename[FSTRING_LEN];
898 char machine[FSTRING_LEN];
900 uint32 bcast_msg_flags;
904 /* the following are used by loadparm for option lists */
906 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
907 P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP
911 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
924 BOOL (*special)(int snum, const char *, char **);
925 const struct enum_list *enum_list;
936 /* The following flags are used in SWAT */
937 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
938 #define FLAG_SHARE 0x0002 /* file sharing options */
939 #define FLAG_PRINT 0x0004 /* printing options */
940 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
941 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
942 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
943 #define FLAG_DEVELOPER 0x0040 /* No longer used */
944 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
945 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
946 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
953 /* offsets into message for common items */
960 #define smb_pidhigh 16
961 #define smb_ss_field 18
987 /* flag defines. CIFS spec 3.1.1 */
988 #define FLAG_SUPPORT_LOCKREAD 0x01
989 #define FLAG_CLIENT_BUF_AVAIL 0x02
990 #define FLAG_RESERVED 0x04
991 #define FLAG_CASELESS_PATHNAMES 0x08
992 #define FLAG_CANONICAL_PATHNAMES 0x10
993 #define FLAG_REQUEST_OPLOCK 0x20
994 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
995 #define FLAG_REPLY 0x80
998 #define SMBmkdir 0x00 /* create directory */
999 #define SMBrmdir 0x01 /* delete directory */
1000 #define SMBopen 0x02 /* open file */
1001 #define SMBcreate 0x03 /* create file */
1002 #define SMBclose 0x04 /* close file */
1003 #define SMBflush 0x05 /* flush file */
1004 #define SMBunlink 0x06 /* delete file */
1005 #define SMBmv 0x07 /* rename file */
1006 #define SMBgetatr 0x08 /* get file attributes */
1007 #define SMBsetatr 0x09 /* set file attributes */
1008 #define SMBread 0x0A /* read from file */
1009 #define SMBwrite 0x0B /* write to file */
1010 #define SMBlock 0x0C /* lock byte range */
1011 #define SMBunlock 0x0D /* unlock byte range */
1012 #define SMBctemp 0x0E /* create temporary file */
1013 #define SMBmknew 0x0F /* make new file */
1014 #define SMBcheckpath 0x10 /* check directory path */
1015 #define SMBexit 0x11 /* process exit */
1016 #define SMBlseek 0x12 /* seek */
1017 #define SMBtcon 0x70 /* tree connect */
1018 #define SMBtconX 0x75 /* tree connect and X*/
1019 #define SMBtdis 0x71 /* tree disconnect */
1020 #define SMBnegprot 0x72 /* negotiate protocol */
1021 #define SMBdskattr 0x80 /* get disk attributes */
1022 #define SMBsearch 0x81 /* search directory */
1023 #define SMBsplopen 0xC0 /* open print spool file */
1024 #define SMBsplwr 0xC1 /* write to print spool file */
1025 #define SMBsplclose 0xC2 /* close print spool file */
1026 #define SMBsplretq 0xC3 /* return print queue */
1027 #define SMBsends 0xD0 /* send single block message */
1028 #define SMBsendb 0xD1 /* send broadcast message */
1029 #define SMBfwdname 0xD2 /* forward user name */
1030 #define SMBcancelf 0xD3 /* cancel forward */
1031 #define SMBgetmac 0xD4 /* get machine name */
1032 #define SMBsendstrt 0xD5 /* send start of multi-block message */
1033 #define SMBsendend 0xD6 /* send end of multi-block message */
1034 #define SMBsendtxt 0xD7 /* send text of multi-block message */
1036 /* Core+ protocol */
1037 #define SMBlockread 0x13 /* Lock a range and read */
1038 #define SMBwriteunlock 0x14 /* Unlock a range then write */
1039 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
1040 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
1041 #define SMBwritec 0x20 /* secondary write request */
1042 #define SMBwriteclose 0x2c /* write a file then close it */
1044 /* dos extended protocol */
1045 #define SMBreadBraw 0x1A /* read block raw */
1046 #define SMBreadBmpx 0x1B /* read block multiplexed */
1047 #define SMBreadBs 0x1C /* read block (secondary response) */
1048 #define SMBwriteBraw 0x1D /* write block raw */
1049 #define SMBwriteBmpx 0x1E /* write block multiplexed */
1050 #define SMBwriteBs 0x1F /* write block (secondary request) */
1051 #define SMBwriteC 0x20 /* write complete response */
1052 #define SMBsetattrE 0x22 /* set file attributes expanded */
1053 #define SMBgetattrE 0x23 /* get file attributes expanded */
1054 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
1055 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
1056 #define SMBtranss 0x26 /* transaction (secondary request/response) */
1057 #define SMBioctl 0x27 /* IOCTL */
1058 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1059 #define SMBcopy 0x29 /* copy */
1060 #define SMBmove 0x2A /* move */
1061 #define SMBecho 0x2B /* echo */
1062 #define SMBopenX 0x2D /* open and X */
1063 #define SMBreadX 0x2E /* read and X */
1064 #define SMBwriteX 0x2F /* write and X */
1065 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1066 #define SMBffirst 0x82 /* find first */
1067 #define SMBfunique 0x83 /* find unique */
1068 #define SMBfclose 0x84 /* find close */
1069 #define SMBkeepalive 0x85 /* keepalive */
1070 #define SMBinvalid 0xFE /* invalid command */
1072 /* Extended 2.0 protocol */
1073 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1074 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1075 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1076 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1077 #define SMBulogoffX 0x74 /* user logoff */
1079 /* NT SMB extensions. */
1080 #define SMBnttrans 0xA0 /* NT transact */
1081 #define SMBnttranss 0xA1 /* NT transact secondary */
1082 #define SMBntcreateX 0xA2 /* NT create and X */
1083 #define SMBntcancel 0xA4 /* NT cancel */
1084 #define SMBntrename 0xA5 /* NT rename */
1086 /* These are the trans subcommands */
1087 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1088 #define TRANSACT_DCERPCCMD 0x26
1089 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1091 /* These are the TRANS2 sub commands */
1092 #define TRANSACT2_OPEN 0x00
1093 #define TRANSACT2_FINDFIRST 0x01
1094 #define TRANSACT2_FINDNEXT 0x02
1095 #define TRANSACT2_QFSINFO 0x03
1096 #define TRANSACT2_SETFSINFO 0x04
1097 #define TRANSACT2_QPATHINFO 0x05
1098 #define TRANSACT2_SETPATHINFO 0x06
1099 #define TRANSACT2_QFILEINFO 0x07
1100 #define TRANSACT2_SETFILEINFO 0x08
1101 #define TRANSACT2_FSCTL 0x09
1102 #define TRANSACT2_IOCTL 0x0A
1103 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1104 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1105 #define TRANSACT2_MKDIR 0x0D
1106 #define TRANSACT2_SESSION_SETUP 0x0E
1107 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1108 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1110 /* These are the NT transact sub commands. */
1111 #define NT_TRANSACT_CREATE 1
1112 #define NT_TRANSACT_IOCTL 2
1113 #define NT_TRANSACT_SET_SECURITY_DESC 3
1114 #define NT_TRANSACT_NOTIFY_CHANGE 4
1115 #define NT_TRANSACT_RENAME 5
1116 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1117 #define NT_TRANSACT_GET_USER_QUOTA 7
1118 #define NT_TRANSACT_SET_USER_QUOTA 8
1120 /* These are the NT transact_get_user_quota sub commands */
1121 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1122 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1123 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1125 /* Relevant IOCTL codes */
1126 #define IOCTL_QUERY_JOB_INFO 0x530060
1128 /* these are the trans2 sub fields for primary requests */
1129 #define smb_tpscnt smb_vwv0
1130 #define smb_tdscnt smb_vwv1
1131 #define smb_mprcnt smb_vwv2
1132 #define smb_mdrcnt smb_vwv3
1133 #define smb_msrcnt smb_vwv4
1134 #define smb_flags smb_vwv5
1135 #define smb_timeout smb_vwv6
1136 #define smb_pscnt smb_vwv9
1137 #define smb_psoff smb_vwv10
1138 #define smb_dscnt smb_vwv11
1139 #define smb_dsoff smb_vwv12
1140 #define smb_suwcnt smb_vwv13
1141 #define smb_setup smb_vwv14
1142 #define smb_setup0 smb_setup
1143 #define smb_setup1 (smb_setup+2)
1144 #define smb_setup2 (smb_setup+4)
1146 /* these are for the secondary requests */
1147 #define smb_spscnt smb_vwv2
1148 #define smb_spsoff smb_vwv3
1149 #define smb_spsdisp smb_vwv4
1150 #define smb_sdscnt smb_vwv5
1151 #define smb_sdsoff smb_vwv6
1152 #define smb_sdsdisp smb_vwv7
1153 #define smb_sfid smb_vwv8
1155 /* and these for responses */
1156 #define smb_tprcnt smb_vwv0
1157 #define smb_tdrcnt smb_vwv1
1158 #define smb_prcnt smb_vwv3
1159 #define smb_proff smb_vwv4
1160 #define smb_prdisp smb_vwv5
1161 #define smb_drcnt smb_vwv6
1162 #define smb_droff smb_vwv7
1163 #define smb_drdisp smb_vwv8
1165 /* these are for the NT trans primary request. */
1166 #define smb_nt_MaxSetupCount smb_vwv0
1167 #define smb_nt_Flags (smb_vwv0 + 1)
1168 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1169 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1170 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1171 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1172 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1173 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1174 #define smb_nt_DataCount (smb_vwv0 + 27)
1175 #define smb_nt_DataOffset (smb_vwv0 + 31)
1176 #define smb_nt_SetupCount (smb_vwv0 + 35)
1177 #define smb_nt_Function (smb_vwv0 + 36)
1178 #define smb_nt_SetupStart (smb_vwv0 + 38)
1180 /* these are for the NT trans secondary request. */
1181 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1182 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1183 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1184 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1185 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1186 #define smb_nts_DataCount (smb_vwv0 + 23)
1187 #define smb_nts_DataOffset (smb_vwv0 + 27)
1188 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1190 /* these are for the NT trans reply. */
1191 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1192 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1193 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1194 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1195 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1196 #define smb_ntr_DataCount (smb_vwv0 + 23)
1197 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1198 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1200 /* these are for the NT create_and_X */
1201 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1202 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1203 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1204 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1205 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1206 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1207 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1208 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1209 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1210 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1211 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1213 /* this is used on a TConX. I'm not sure the name is very helpful though */
1214 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1215 #define SMB_SHARE_IN_DFS 0x0002
1217 /* Named pipe write mode flags. Used in writeX calls. */
1218 #define PIPE_RAW_MODE 0x4
1219 #define PIPE_START_MESSAGE 0x8
1221 /* File Specific access rights */
1222 #define FILE_READ_DATA 0x00000001
1223 #define FILE_WRITE_DATA 0x00000002
1224 #define FILE_APPEND_DATA 0x00000004
1225 #define FILE_READ_EA 0x00000008 /* File and directory */
1226 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1227 #define FILE_EXECUTE 0x00000020
1228 #define FILE_DELETE_CHILD 0x00000040
1229 #define FILE_READ_ATTRIBUTES 0x00000080
1230 #define FILE_WRITE_ATTRIBUTES 0x00000100
1232 #define FILE_ALL_ACCESS 0x000001FF
1234 /* Directory specific access rights */
1235 #define FILE_LIST_DIRECTORY 0x00000001
1236 #define FILE_ADD_FILE 0x00000002
1237 #define FILE_ADD_SUBDIRECTORY 0x00000004
1238 #define FILE_TRAVERSE 0x00000020
1239 #define FILE_DELETE_CHILD 0x00000040
1241 /* the desired access to use when opening a pipe */
1242 #define DESIRED_ACCESS_PIPE 0x2019f
1244 /* Generic access masks & rights. */
1245 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1246 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1247 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1248 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1249 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1251 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1252 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1253 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1254 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1255 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1256 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1258 /* Mapping of generic access rights for files to specific rights. */
1260 /* This maps to 0x1F01FF */
1261 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1263 /* This maps to 0x120089 */
1264 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1265 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1267 /* This maps to 0x120116 */
1268 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1269 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1271 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|\
1272 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1274 /* Share specific rights. */
1275 #define SHARE_ALL_ACCESS FILE_GENERIC_ALL
1276 #define SHARE_READ_ONLY (FILE_GENERIC_READ|FILE_EXECUTE)
1278 /* Mapping of access rights to UNIX perms. */
1279 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1280 #define UNIX_ACCESS_R FILE_GENERIC_READ
1281 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1282 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1284 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1285 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1286 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1287 #define UNIX_DIRECTORY_ACCESS_W FILE_GENERIC_WRITE
1288 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1292 * This is the old mapping we used to use. To get W2KSP2 profiles
1293 * working we need to map to the canonical file perms.
1295 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1296 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1297 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1298 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1299 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1300 FILE_APPEND_DATA|FILE_WRITE_DATA)
1301 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1302 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1305 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1308 #define REQUEST_OPLOCK 2
1309 #define REQUEST_BATCH_OPLOCK 4
1310 #define OPEN_DIRECTORY 8
1311 #define EXTENDED_RESPONSE_REQUIRED 0x10
1313 /* ShareAccess field. */
1314 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1315 #define FILE_SHARE_READ 1
1316 #define FILE_SHARE_WRITE 2
1317 #define FILE_SHARE_DELETE 4
1319 /* FileAttributesField */
1320 #define FILE_ATTRIBUTE_READONLY 0x001L
1321 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1322 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1323 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1324 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1325 #define FILE_ATTRIBUTE_NORMAL 0x080L
1326 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1327 #define FILE_ATTRIBUTE_SPARSE 0x200L
1328 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1329 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1330 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1331 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1332 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1333 #define SAMBA_ATTRIBUTES_MASK 0x7F
1335 /* Flags - combined with attributes. */
1336 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1337 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1338 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1339 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1340 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1341 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1342 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1344 /* CreateDisposition field. */
1345 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1346 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1347 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1348 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1349 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1350 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1352 /* CreateOptions field. */
1353 #define FILE_DIRECTORY_FILE 0x0001
1354 #define FILE_WRITE_THROUGH 0x0002
1355 #define FILE_SEQUENTIAL_ONLY 0x0004
1356 #define FILE_NON_DIRECTORY_FILE 0x0040
1357 #define FILE_NO_EA_KNOWLEDGE 0x0200
1358 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1359 #define FILE_RANDOM_ACCESS 0x0800
1360 #define FILE_DELETE_ON_CLOSE 0x1000
1361 #define FILE_OPEN_BY_FILE_ID 0x2000
1363 /* Private create options used by the ntcreatex processing code. From Samba4. */
1364 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x01000000
1365 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x02000000
1367 /* Responses when opening a file. */
1368 #define FILE_WAS_SUPERSEDED 0
1369 #define FILE_WAS_OPENED 1
1370 #define FILE_WAS_CREATED 2
1371 #define FILE_WAS_OVERWRITTEN 3
1373 /* File type flags */
1374 #define FILE_TYPE_DISK 0
1375 #define FILE_TYPE_BYTE_MODE_PIPE 1
1376 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1377 #define FILE_TYPE_PRINTER 3
1378 #define FILE_TYPE_COMM_DEVICE 4
1379 #define FILE_TYPE_UNKNOWN 0xFFFF
1381 /* Flag for NT transact rename call. */
1382 #define RENAME_REPLACE_IF_EXISTS 1
1384 /* flags for SMBntrename call (from Samba4) */
1385 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1386 #define RENAME_FLAG_HARD_LINK 0x103
1387 #define RENAME_FLAG_RENAME 0x104
1388 #define RENAME_FLAG_COPY 0x105
1390 /* Filesystem Attributes. */
1391 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1392 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1393 #define FILE_UNICODE_ON_DISK 0x00000004
1394 /* According to cifs9f, this is 4, not 8 */
1395 /* Acconding to testing, this actually sets the security attribute! */
1396 #define FILE_PERSISTENT_ACLS 0x00000008
1397 #define FILE_FILE_COMPRESSION 0x00000010
1398 #define FILE_VOLUME_QUOTAS 0x00000020
1399 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1400 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1401 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1402 #define FS_LFN_APIS 0x00004000
1403 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1404 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1405 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1406 #define FILE_NAMED_STREAMS 0x00040000
1407 #define FILE_READ_ONLY_VOLUME 0x00080000
1409 /* ChangeNotify flags. */
1410 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1411 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1412 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1413 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1414 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1415 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1416 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1417 #define FILE_NOTIFY_CHANGE_EA 0x080
1418 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1419 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1420 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1421 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1423 #define FILE_NOTIFY_CHANGE_NAME \
1424 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1426 /* change notify action results */
1427 #define NOTIFY_ACTION_ADDED 1
1428 #define NOTIFY_ACTION_REMOVED 2
1429 #define NOTIFY_ACTION_MODIFIED 3
1430 #define NOTIFY_ACTION_OLD_NAME 4
1431 #define NOTIFY_ACTION_NEW_NAME 5
1432 #define NOTIFY_ACTION_ADDED_STREAM 6
1433 #define NOTIFY_ACTION_REMOVED_STREAM 7
1434 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1437 /* where to find the base of the SMB packet proper */
1438 #define smb_base(buf) (((char *)(buf))+4)
1440 /* we don't allow server strings to be longer than 48 characters as
1441 otherwise NT will not honour the announce packets */
1442 #define MAX_SERVER_STRING_LENGTH 48
1445 #define SMB_SUCCESS 0 /* The request was successful. */
1448 void dfs_unlogin(void);
1449 extern int dcelogin_atmost_once;
1453 char *strdup(char *s);
1457 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1464 /* This was set by JHT in liaison with Jeremy Allison early 1997
1466 * Version 4.0 - never made public
1467 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1468 * - Reappeared in 1.9.16p11 with fixed smbd services
1469 * Version 4.20 - To indicate that nmbd and browsing now works better
1470 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1472 * Note: In the presence of NT4.X do not set above 4.9
1473 * Setting this above 4.9 can have undesired side-effects.
1474 * This may change again in Samba-3.0 after further testing. JHT
1477 #define DEFAULT_MAJOR_VERSION 0x04
1478 #define DEFAULT_MINOR_VERSION 0x09
1480 /* Browser Election Values */
1481 #define BROWSER_ELECTION_VERSION 0x010f
1482 #define BROWSER_CONSTANT 0xaa55
1484 /* Sercurity mode bits. */
1485 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1486 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1487 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1488 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1490 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1492 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1493 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1494 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1495 #define FLAGS2_UNKNOWN_BIT4 0x0010
1496 #define FLAGS2_IS_LONG_NAME 0x0040
1497 #define FLAGS2_EXTENDED_SECURITY 0x0800
1498 #define FLAGS2_DFS_PATHNAMES 0x1000
1499 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1500 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1501 #define FLAGS2_UNICODE_STRINGS 0x8000
1503 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1505 /* TCONX Flag (smb_vwv2). */
1506 #define TCONX_FLAG_EXTENDED_RESPONSE 0x8
1508 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1510 #define CAP_RAW_MODE 0x0001
1511 #define CAP_MPX_MODE 0x0002
1512 #define CAP_UNICODE 0x0004
1513 #define CAP_LARGE_FILES 0x0008
1514 #define CAP_NT_SMBS 0x0010
1515 #define CAP_RPC_REMOTE_APIS 0x0020
1516 #define CAP_STATUS32 0x0040
1517 #define CAP_LEVEL_II_OPLOCKS 0x0080
1518 #define CAP_LOCK_AND_READ 0x0100
1519 #define CAP_NT_FIND 0x0200
1520 #define CAP_DFS 0x1000
1521 #define CAP_W2K_SMBS 0x2000
1522 #define CAP_LARGE_READX 0x4000
1523 #define CAP_LARGE_WRITEX 0x8000
1524 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1525 #define CAP_EXTENDED_SECURITY 0x80000000
1527 /* protocol types. It assumes that higher protocols include lower protocols
1529 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1531 /* security levels */
1532 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1542 /* printing types */
1543 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1544 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1545 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2,PRINT_IPRINT
1546 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1547 ,PRINT_TEST,PRINT_VLP
1548 #endif /* DEVELOPER */
1551 /* LDAP schema types */
1552 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1554 /* LDAP SSL options */
1555 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1557 /* LDAP PASSWD SYNC methods */
1558 enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY};
1560 /* Remote architectures we know about. */
1561 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT,
1562 RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_VISTA,
1563 RA_SAMBA, RA_CIFSFS};
1566 enum case_handling {CASE_LOWER,CASE_UPPER};
1568 /* ACL compatibility */
1569 enum acl_compatibility {ACL_COMPAT_AUTO, ACL_COMPAT_WINNT, ACL_COMPAT_WIN2K};
1571 * Global value meaing that the smb_uid field should be
1572 * ingored (in share level security and protocol level == CORE)
1575 #define UID_FIELD_INVALID 0
1576 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1579 * Size of buffer to use when moving files across filesystems.
1581 #define COPYBUF_SIZE (8*1024)
1584 * Used in chaining code.
1586 extern int chain_size;
1589 * Map the Core and Extended Oplock requesst bits down
1590 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1596 #define CORE_OPLOCK_REQUEST(inbuf) \
1597 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1600 * Extended protocol.
1602 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1605 #define LOCKING_ANDX_SHARED_LOCK 0x1
1606 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1607 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1608 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1609 #define LOCKING_ANDX_LARGE_FILES 0x10
1612 * Bits we test with.
1613 * Note these must fit into 16-bits.
1616 #define NO_OPLOCK 0x0
1617 #define EXCLUSIVE_OPLOCK 0x1
1618 #define BATCH_OPLOCK 0x2
1619 #define LEVEL_II_OPLOCK 0x4
1621 /* The following are Samba-private. */
1622 #define INTERNAL_OPEN_ONLY 0x8
1623 #define FAKE_LEVEL_II_OPLOCK 0x10 /* Client requested no_oplock, but we have to
1624 * inform potential level2 holders on
1626 #define DEFERRED_OPEN_ENTRY 0x20
1627 #define UNUSED_SHARE_MODE_ENTRY 0x40
1628 #define FORCE_OPLOCK_BREAK_TO_NONE 0x80
1630 /* None of the following should ever appear in fsp->oplock_request. */
1631 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1633 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1634 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1635 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1637 struct inform_level2_message {
1641 unsigned long target_file_id;
1642 unsigned long source_file_id;
1645 /* kernel_oplock_message definition.
1647 struct kernel_oplock_message {
1650 unsigned long file_id;
1654 0 SMB_DEV_T dev 8 bytes.
1655 8 SMB_INO_T inode 8 bytes
1656 16 unsigned long file_id 4 bytes
1660 #define MSG_SMB_KERNEL_BREAK_SIZE 20
1662 /* file_renamed_message definition.
1664 struct file_renamed_message {
1667 char names[1]; A variable area containing sharepath and filename.
1671 0 SMB_DEV_T dev 8 bytes.
1672 8 SMB_INO_T inode 8 bytes
1673 16 char [] name zero terminated namelen bytes
1674 minimum length == 18.
1678 #define MSG_FILE_RENAMED_MIN_SIZE 16
1681 * On the wire return values for oplock types.
1684 #define CORE_OPLOCK_GRANTED (1<<5)
1685 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1687 #define NO_OPLOCK_RETURN 0
1688 #define EXCLUSIVE_OPLOCK_RETURN 1
1689 #define BATCH_OPLOCK_RETURN 2
1690 #define LEVEL_II_OPLOCK_RETURN 3
1693 #define OPLOCKLEVEL_NONE 0
1694 #define OPLOCKLEVEL_II 1
1697 * Capabilities abstracted for different systems.
1700 enum smbd_capability {
1701 KERNEL_OPLOCK_CAPABILITY,
1702 DMAPI_ACCESS_CAPABILITY
1705 /* if a kernel does support oplocks then a structure of the following
1706 typee is used to describe how to interact with the kernel */
1707 struct kernel_oplocks {
1708 files_struct * (*receive_message)(fd_set *fds);
1709 BOOL (*set_oplock)(files_struct *fsp, int oplock_type);
1710 void (*release_oplock)(files_struct *fsp);
1711 BOOL (*msg_waiting)(fd_set *fds);
1712 int notification_fd;
1715 #include "smb_macros.h"
1717 #define MAX_NETBIOSNAME_LEN 16
1718 /* DOS character, NetBIOS namestring. Type used on the wire. */
1719 typedef char nstring[MAX_NETBIOSNAME_LEN];
1720 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1721 typedef char unstring[MAX_NETBIOSNAME_LEN*4];
1723 /* A netbios name structure. */
1727 unsigned int name_type;
1730 /* A netbios node status array element. */
1731 typedef struct node_status_ {
1734 unsigned char flags;
1735 } NODE_STATUS_STRUCT;
1737 /* The extra info from a NetBIOS node status query */
1738 struct node_status_extra {
1739 unsigned char mac_addr[6];
1740 /* There really is more here ... */
1750 /* For split krb5 SPNEGO blobs. */
1751 struct pending_auth_data {
1752 struct pending_auth_data *prev, *next;
1753 uint16 vuid; /* Tag for this entry. */
1754 uint16 smbpid; /* Alternate tag for this entry. */
1756 DATA_BLOB partial_data;
1759 typedef struct user_struct {
1760 struct user_struct *next, *prev;
1761 uint16 vuid; /* Tag for this entry. */
1762 uid_t uid; /* uid of a validated user */
1763 gid_t gid; /* gid of a validated user */
1765 userdom_struct user;
1772 /* following groups stuff added by ih */
1773 /* This groups info is needed for when we become_user() for this uid */
1777 NT_USER_TOKEN *nt_user_token;
1779 DATA_BLOB session_key;
1781 char *session_keystr; /* used by utmp and pam session code.
1785 struct auth_serversupplied_info *server_info;
1787 struct auth_ntlmssp_state *auth_ntlmssp_state;
1790 struct unix_error_map {
1798 * Size of new password account encoding string. This is enough space to
1799 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1800 * Do not change unless you are adding new ACB bits!
1803 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1806 Do you want session setups at user level security with a invalid
1807 password to be rejected or allowed in as guest? WinNT rejects them
1808 but it can be a pain as it means "net view" needs to use a password
1810 You have 3 choices in the setting of map_to_guest:
1812 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1813 are rejected. This is the default.
1815 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1816 are rejected, unless the username does not exist, in which case it
1817 is treated as a guest login
1819 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1820 are treated as a guest login
1822 Note that map_to_guest only has an effect in user or server
1826 #define NEVER_MAP_TO_GUEST 0
1827 #define MAP_TO_GUEST_ON_BAD_USER 1
1828 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1829 #define MAP_TO_GUEST_ON_BAD_UID 3
1831 #define SAFE_NETBIOS_CHARS ". -_"
1833 /* generic iconv conversion structure */
1834 typedef struct _smb_iconv_t {
1835 size_t (*direct)(void *cd, const char **inbuf, size_t *inbytesleft,
1836 char **outbuf, size_t *outbytesleft);
1837 size_t (*pull)(void *cd, const char **inbuf, size_t *inbytesleft,
1838 char **outbuf, size_t *outbytesleft);
1839 size_t (*push)(void *cd, const char **inbuf, size_t *inbytesleft,
1840 char **outbuf, size_t *outbytesleft);
1841 void *cd_direct, *cd_pull, *cd_push;
1842 char *from_name, *to_name;
1845 /* The maximum length of a trust account password.
1846 Used when we randomly create it, 15 char passwords
1847 exceed NT4's max password length */
1849 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1851 #include "popt_common.h"
1855 #define LDAP_PORT 389
1858 /* used by the IP comparison function */
1864 /* Special name type used to cause a _kerberos DNS lookup. */
1865 #define KDC_NAME_TYPE 0xDCDC
1867 /* Used by the SMB signing functions. */
1869 typedef struct smb_sign_info {
1870 void (*sign_outgoing_message)(char *outbuf, struct smb_sign_info *si);
1871 BOOL (*check_incoming_message)(char *inbuf, struct smb_sign_info *si, BOOL must_be_ok);
1872 void (*free_signing_context)(struct smb_sign_info *si);
1873 void *signing_context;
1875 BOOL negotiated_smb_signing;
1876 BOOL allow_smb_signing;
1878 BOOL mandatory_signing;
1879 BOOL seen_valid; /* Have I ever seen a validly signed packet? */
1889 struct ea_list *next, *prev;
1890 struct ea_struct ea;
1893 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1894 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1895 /* EA to use for DOS attributes */
1896 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1898 #define UUID_SIZE 16
1899 #define UUID_FLAT_SIZE 16
1900 typedef struct uuid_flat {
1901 uint8 info[UUID_FLAT_SIZE];
1904 /* map readonly options */
1905 enum mapreadonly_options {MAP_READONLY_NO, MAP_READONLY_YES, MAP_READONLY_PERMISSIONS};
1907 /* usershare error codes. */
1908 enum usershare_err {
1910 USERSHARE_MALFORMED_FILE,
1911 USERSHARE_BAD_VERSION,
1912 USERSHARE_MALFORMED_PATH,
1913 USERSHARE_MALFORMED_COMMENT_DEF,
1914 USERSHARE_MALFORMED_ACL_DEF,
1916 USERSHARE_PATH_NOT_ABSOLUTE,
1917 USERSHARE_PATH_IS_DENIED,
1918 USERSHARE_PATH_NOT_ALLOWED,
1919 USERSHARE_PATH_NOT_DIRECTORY,
1923 /* Different reasons for closing a file. */
1924 enum file_close_type {NORMAL_CLOSE=0,SHUTDOWN_CLOSE,ERROR_CLOSE};