Avoid using tevent_util.h, which won't be available if we use the system

[amitay/samba.git] / docs-xml / manpages-3 / mount.cifs.8.xml

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE refentry PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
<refentry id="mount.cifs.8">

<refmeta>
        <refentrytitle>mount.cifs</refentrytitle>
        <manvolnum>8</manvolnum>
        <refmiscinfo class="source">Samba</refmiscinfo>
        <refmiscinfo class="manual">System Administration tools</refmiscinfo>
        <refmiscinfo class="version">3.2</refmiscinfo>
</refmeta>


<refnamediv>
        <refname>mount.cifs</refname>
        <refpurpose>mount using the Common Internet File System (CIFS)</refpurpose>
</refnamediv>

<refsynopsisdiv>
        <cmdsynopsis>

                <command>mount.cifs</command>
                <arg choice="req">service</arg> 
                <arg choice="req">mount-point</arg>     
                <arg choice="opt">-o options</arg>      
        </cmdsynopsis>
</refsynopsisdiv>

<refsect1>
        <title>DESCRIPTION</title>

        <para>This tool is part of the <citerefentry><refentrytitle>samba</refentrytitle>
        <manvolnum>7</manvolnum></citerefentry> suite.</para>

        <para>mount.cifs mounts a Linux CIFS filesystem. It
is usually invoked indirectly by
the <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> command when using the 
"-t cifs" option. This command only works in Linux, and the kernel must
support the cifs filesystem. The CIFS protocol is the successor to the 
SMB protocol and is supported by most Windows servers and many other
commercial servers and Network Attached Storage appliances as well as 
by the popular Open Source server Samba.
        </para>

        <para>
        The mount.cifs utility attaches the UNC name (exported network resource)
        specified as <emphasis>service</emphasis> (using //server/share syntax,
        where "server" is the server name or IP address and "share" is the name
        of the share) to the local directory <emphasis>mount-point</emphasis>.
        It is possible to set the mode for mount.cifs to setuid root to allow
        non-root users to mount shares to directories for which they
        have write permission.
        </para>

        <para>
                Options to <emphasis>mount.cifs</emphasis> are specified as a comma-separated
list of key=value pairs. It is possible to send options other
than those listed here, assuming that the cifs filesystem kernel module (cifs.ko) supports them.   
Unrecognized cifs mount options passed to the cifs vfs kernel code will be logged to the
kernel log.

        </para>

        <para><emphasis>mount.cifs</emphasis> causes the cifs vfs to launch a thread named cifsd. After mounting it keeps running until
                the mounted resource is unmounted (usually via the umount utility).
        </para>

</refsect1>

<refsect1>
        <title>OPTIONS</title>
        <variablelist>
                <varlistentry><term>user=<replaceable>arg</replaceable></term>

                <listitem><para>specifies the username to connect as. If
                                this is not given, then the environment variable <emphasis>USER</emphasis> is used. This option can also take the
form "user%password" or "workgroup/user" or
"workgroup/user%password" to allow the password and workgroup
to be specified as part of the username.
                </para>

<note>
        <para>
        The cifs vfs accepts the parameter <parameter>user=</parameter>, or for users familiar with smbfs it accepts the longer form of the parameter <parameter>username=</parameter>.  Similarly the longer smbfs style parameter names may be accepted as synonyms for the shorter cifs parameters <parameter>pass=</parameter>,<parameter>dom=</parameter> and <parameter>cred=</parameter>.
        </para>
</note>

                </listitem>
        </varlistentry>

        <varlistentry><term>password=<replaceable>arg</replaceable></term>

                <listitem><para>specifies the CIFS password. If this
option is not given then the environment variable
<emphasis>PASSWD</emphasis> is used. If the password is not specified
directly or indirectly via an argument to mount, <emphasis>mount.cifs</emphasis> will prompt
for a password, unless the guest option is specified.
</para>

<para>Note that a password which contains the delimiter
character (i.e. a comma ',') will fail to be parsed correctly
on the command line.  However, the same password defined
in the PASSWD environment variable or via a credentials file (see
below) or entered at the password prompt will be read correctly.
</para>
        </listitem></varlistentry>

        <varlistentry><term>credentials=<replaceable>filename</replaceable></term>

                <listitem><para>
                                specifies a file that contains a username
                                and/or password and optionally the name of the
                                workgroup. The format of the file is:
                        </para>

<programlisting>
                username=<replaceable>value</replaceable>
                password=<replaceable>value</replaceable>
                workgroup=<replaceable>value</replaceable>
</programlisting>

                <para>
This is preferred over having passwords in plaintext in a
shared file, such as <filename>/etc/fstab</filename>. Be sure to protect any
credentials file properly.
                </para>
        </listitem></varlistentry>

        <varlistentry>
                <term>uid=<replaceable>arg</replaceable></term>

                <listitem><para>sets the uid that will own all files on
        the mounted filesystem.
        It may be specified as either a username or a numeric uid.
        For mounts to servers which do support the CIFS Unix extensions, 
        such as a properly configured Samba server, the server provides
                the uid, gid and mode so this parameter should not be
                specified unless the server and client uid and gid
                numbering differ.  If the server and client are in the
                same domain (e.g. running winbind or nss_ldap) and
                the server supports the Unix Extensions then the uid
                and gid can be retrieved from the server (and uid
                and gid would not have to be specifed on the mount. 
                For servers which do not support the CIFS Unix
                extensions, the default uid (and gid) returned on lookup 
                of existing files will be the uid (gid) of the person
                who executed the mount (root, except when mount.cifs
                is configured setuid for user mounts) unless the "uid="
                (gid) mount option is specified.  For the uid (gid) of newly
                created files and directories, ie files created since
                the last mount of the server share, the expected uid
                (gid) is cached as long as the inode remains in
                memory on the client.   Also note that permission
                checks (authorization checks) on accesses to a file occur
                at the server, but there are cases in which an administrator
                may want to restrict at the client as well.  For those
                servers which do not report a uid/gid owner
                (such as Windows), permissions can also be checked at the
                client, and a crude form of client side permission checking
                can be enabled by specifying file_mode and dir_mode on
                the client.  Note that the mount.cifs helper must be
                at version 1.10 or higher to support specifying the uid
                (or gid) in non-numeric form.
        </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>gid=<replaceable>arg</replaceable></term>

                <listitem><para>sets the gid that will own all files on
the mounted filesystem.  It may be specified as either a groupname or a numeric 
gid. For other considerations see the description of uid above. 
                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>port=<replaceable>arg</replaceable></term>

                <listitem><para>sets the port number on the server to attempt to contact to negotiate
CIFS support.  If the CIFS server is not listening on this port or
if it is not specified, the default ports will be tried i.e. 
port 445 is tried and if no response then port 139 is tried.
                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>servern=<replaceable>arg</replaceable></term>

                <listitem><para>
                Specify the server netbios name (RFC1001 name) to use
                when attempting to setup a session to the server. Although
                rarely needed for mounting to newer servers, this option
                is needed for mounting to some older servers (such
                as OS/2 or Windows 98 and Windows ME) since when connecting
                over port 139 they, unlike most newer servers, do not
                support a default server name.  A server name can be up
                to 15 characters long and is usually uppercased.
                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>netbiosname=<replaceable>arg</replaceable></term>

                <listitem><para>When mounting to servers via port 139, specifies the RFC1001
                source name to use to represent the client netbios machine
                name when doing the RFC1001 netbios session initialize.
                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>file_mode=<replaceable>arg</replaceable></term>

                <listitem><para>If the server does not support the CIFS Unix extensions this
                                overrides the default file mode.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>dir_mode=<replaceable>arg</replaceable></term>

                <listitem><para>If the server does not support the CIFS Unix extensions this
                                overrides the default mode for directories. </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>ip=<replaceable>arg</replaceable></term>

                <listitem><para>sets the destination IP address.  This option is set automatically if the server name portion of the requested UNC name can be resolved so rarely needs to be specified by the user.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>domain=<replaceable>arg</replaceable></term>

                <listitem><para>sets the domain (workgroup) of the user </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>guest</term>

                <listitem><para>don't prompt for a password </para></listitem>

        </varlistentry>

        <varlistentry>
                <term>iocharset</term>

                <listitem><para>Charset used to convert local path names to and from
                Unicode. Unicode is used by default for network path
                names if the server supports it. If iocharset is
                not specified then the nls_default specified
                during the local client kernel build will be used.
                If server does not support Unicode, this parameter is
                unused. </para></listitem>

        </varlistentry>

        <varlistentry>
                <term>ro</term>

                <listitem><para>mount read-only</para></listitem>

        </varlistentry>

        <varlistentry>
                <term>rw</term>
                <listitem><para>mount read-write</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>setuids</term>
                <listitem><para>If the CIFS Unix extensions are negotiated with the server
                the client will attempt to set the effective uid and gid of
                the local process on newly created files, directories, and
                devices (create, mkdir, mknod). If the CIFS Unix Extensions
                are not negotiated, for newly created files and directories
                instead of using the default uid and gid specified on the
                the mount, cache the new file's uid and gid locally which means
                that the uid for the file can change when the inode is
                reloaded (or the user remounts the share).</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>nosetuids</term>
                <listitem><para>The client will not attempt to set the uid and gid on
                on newly created files, directories, and devices (create,
                mkdir, mknod) which will result in the server setting the
                uid and gid to the default (usually the server uid of the
                user who mounted the share).  Letting the server (rather than
                the client) set the uid and gid is the default.If the CIFS
                Unix Extensions are not negotiated then the uid and gid for
                new files will appear to be the uid (gid) of the mounter or the
                uid (gid) parameter specified on the mount.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>perm</term>
                <listitem><para>Client does permission checks (vfs_permission check of uid
                and gid of the file against the mode and desired operation),
                Note that this is in addition to the normal ACL check on the
                target machine done by the server software.
                Client permission checking is enabled by default.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>noperm</term>
                <listitem><para>Client does not do permission checks.  This can expose
                files on this mount to access by other users on the local
                client system. It is typically only needed when the server
                supports the CIFS Unix Extensions but the UIDs/GIDs on the
                client and server system do not match closely enough to allow
                access by the user doing the mount.
                Note that this does not affect the normal ACL check on the
                target machine done by the server software (of the server
                ACL against the user name provided at mount time).</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>directio</term>
                <listitem><para>Do not do inode data caching on files opened on this mount.
                This precludes mmaping files on this mount. In some cases
                with fast networks and little or no caching benefits on the
                client (e.g. when the application is doing large sequential
                reads bigger than page size without rereading the same data)
                this can provide better performance than the default
                behavior which caches reads (readahead) and writes
                (writebehind) through the local Linux client pagecache
                if oplock (caching token) is granted and held. Note that
                direct allows write operations larger than page size
                to be sent to the server. On some kernels this requires the cifs.ko module
                to be built with the CIFS_EXPERIMENTAL configure option.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>mapchars</term>
                <listitem><para>Translate six of the seven reserved characters (not backslash, but including the colon, question mark, pipe, asterik, greater than and less than characters)
                to the remap range (above 0xF000), which also
                allows the CIFS client to recognize files created with
                such characters by Windows's POSIX emulation. This can
                also be useful when mounting to most versions of Samba
                (which also forbids creating and opening files
                whose names contain any of these seven characters).
                This has no effect if the server does not support
                Unicode on the wire.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>nomapchars</term>
                <listitem><para>Do not translate any of these seven characters (default)</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>intr</term>
                <listitem><para>currently unimplemented</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>nointr</term>
                <listitem><para>(default) currently unimplemented </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>hard</term>
                <listitem><para>The  program  accessing  a file on the cifs mounted file system will hang when the
              server crashes.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>soft</term>
                <listitem><para>(default) The  program  accessing  a file on the cifs mounted file system will not hang when the server crashes and will return errors to the user application.</para></listitem>
        </varlistentry>

        <varlistentry>
                <term>noacl</term>
                <listitem><para>Do not allow POSIX ACL operations even if server would support them.</para><para>
                The CIFS client can get and set POSIX ACLs (getfacl, setfacl) to Samba servers
                version 3.0.10 and later.  Setting POSIX ACLs requires enabling both XATTR and
                then POSIX support in the CIFS configuration options when building the cifs
                module.  POSIX ACL support can be disabled on a per mount basis by specifying
                "noacl" on mount.</para>
                </listitem>
        </varlistentry>

        <varlistentry>
                <term>nocase</term>
                <listitem>
                <para>Request case insensitive path name matching (case
                sensitive is the default if the server suports it).
                </para>
                </listitem>
        </varlistentry>

        <varlistentry>
                <term>sec=</term>
                <listitem>
                <para>Security mode.  Allowed values are:</para>
                        <itemizedlist>
                        <listitem><para>none    attempt to connection as a null user (no name) </para></listitem>
                        <listitem><para>krb5    Use Kerberos version 5 authentication</para></listitem>
                        <listitem><para>krb5i   Use Kerberos authentication and packet signing</para></listitem>
                        <listitem><para>ntlm    Use NTLM password hashing (default)</para></listitem>
                        <listitem><para>ntlmi   Use NTLM password hashing with signing (if
                                /proc/fs/cifs/PacketSigningEnabled on or if
                                server requires signing also can be the default)</para></listitem>
                        <listitem><para>ntlmv2  Use NTLMv2 password hashing</para></listitem>
                        <listitem><para>ntlmv2i Use NTLMv2 password hashing with packet signing</para></listitem>
                        </itemizedlist>

                        <para>[NB This [sec parameter] is under development and expected to be available in cifs kernel module 1.40 and later]
                </para>
                </listitem>
        </varlistentry>

        <varlistentry>
                <term>nobrl</term>
                <listitem>
                <para>Do not send byte range lock requests to the server.
                This is necessary for certain applications that break
                with cifs style mandatory byte range locks (and most
                cifs servers do not yet support requesting advisory
                byte range locks).
                </para>
                </listitem>
        </varlistentry>

        <varlistentry>
                <term>sfu</term>
                <listitem>
                <para>
                When the CIFS Unix Extensions are not negotiated, attempt to
                create device files and fifos in a format compatible with
                Services for Unix (SFU).  In addition retrieve bits 10-12
                of the mode via the SETFILEBITS extended attribute (as
                SFU does).  In the future the bottom 9 bits of the mode
                mode also will be emulated using queries of the security
                descriptor (ACL). [NB: requires version 1.39 or later
                of the CIFS VFS.  To recognize symlinks and be able
                to create symlinks in an SFU interoperable form
                requires version 1.40 or later of the CIFS VFS kernel module.
                </para>
                </listitem>
        </varlistentry>

        <varlistentry>
                <term>serverino</term>
                <listitem><para>Use inode numbers (unique persistent file identifiers)
                returned by the server instead of automatically generating
                temporary inode numbers on the client.  Although server inode numbers
                make it easier to spot hardlinked files (as they will have
                the same inode numbers) and inode numbers may be persistent (which is
                userful for some sofware),
                the server does not guarantee that the inode numbers
                are unique if multiple server side mounts are exported under a
                single share (since inode numbers on the servers might not
                be unique if multiple filesystems are mounted under the same
                shared higher level directory).  Note that not all 
                servers support returning server inode numbers, although
                those that support the CIFS Unix Extensions, and Windows 2000 and
                later servers typically do support this (although not necessarily
                on every local server filesystem). Parameter has no effect if
                the server lacks support for returning inode numbers or equivalent.
                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>noserverino</term>
                <listitem><para>client generates inode numbers (rather than using the actual one
                from the server) by default.
                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>nouser_xattr</term>
                <listitem><para>(default) Do not allow getfattr/setfattr to get/set xattrs, even if server would support it otherwise. </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>rsize=<replaceable>arg</replaceable></term>
                <listitem><para>default network read size (usually 16K). The client currently
                can not use rsize larger than CIFSMaxBufSize. CIFSMaxBufSize
                defaults to 16K and may be changed (from 8K to the maximum
                kmalloc size allowed by your kernel) at module install time
                for cifs.ko. Setting CIFSMaxBufSize to a very large value
                will cause cifs to use more memory and may reduce performance
                in some cases.  To use rsize greater than 127K (the original
                cifs protocol maximum) also requires that the server support
                a new Unix Capability flag (for very large read) which some
                newer servers (e.g. Samba 3.0.26 or later) do. rsize can be
                set from a minimum of 2048 to a maximum of 130048 (127K or
                CIFSMaxBufSize, whichever is smaller)

                </para></listitem>
        </varlistentry>

        <varlistentry>
                <term>wsize=<replaceable>arg</replaceable></term>

                <listitem><para>default network write size (default 57344)
                maximum wsize currently allowed by CIFS is 57344 (fourteen
                4096 byte pages)</para></listitem>
        </varlistentry>
         <varlistentry>
                <term>--verbose</term>
                <listitem><para>Print additional debugging information for the mount. Note that this parameter must be specified before the -o. For example:</para><para>mount -t cifs //server/share /mnt --verbose -o user=username</para></listitem>
        </varlistentry>


        </variablelist>
</refsect1>

<refsect1>
        <title>SERVICE FORMATTING AND DELIMITERS</title>

        <para>
                It's generally preferred to use forward slashes (/) as a delimiter in service names. They are considered to be the "universal delimiter" since they are generally not allowed to be embedded within path components on Windows machines and the client can convert them to blackslashes (\) unconditionally. Conversely, backslash characters are allowed by POSIX to be part of a path component, and can't be automatically converted in the same way.
        </para>
        <para>
                mount.cifs will attempt to convert backslashes to forward slashes where it's able to do so, but it cannot do so in any path component following the sharename.
        </para>
</refsect1>

<refsect1>
        <title>ENVIRONMENT VARIABLES</title>

        <para>
                The variable <emphasis>USER</emphasis> may contain the username of the
person to be used to authenticate to the server.
The variable can be used to set both username and
password by using the format username%password.
        </para>
        
        <para>
                The variable <emphasis>PASSWD</emphasis> may contain the password of the
person using the client.
        </para>

        <para>
                The variable <emphasis>PASSWD_FILE</emphasis> may contain the pathname
of a file to read the password from. A single line of input is
read and used as the password.
        </para>

</refsect1>

<refsect1>
        <title>NOTES</title>
        
        <para>This command may be used only by root, unless installed setuid, in which case the noeexec and nosuid mount flags are enabled.</para>
</refsect1>

<refsect1>
        <title>CONFIGURATION</title>
                <para>
The primary mechanism for making configuration changes and for reading 
debug information for the cifs vfs is via the Linux /proc filesystem.
In the directory <filename>/proc/fs/cifs</filename> are various 
configuration files and pseudo files which can display debug information.  
There are additional startup options such as maximum buffer size and number
of buffers which only may be set when the kernel cifs vfs (cifs.ko module) is 
loaded.  These can be seen by running the modinfo utility against the file
cifs.ko which will list the options that may be passed to cifs during module
installation (device driver load).
For more information see the kernel file <filename>fs/cifs/README</filename>.
</para>
</refsect1>

<refsect1>
        <title>BUGS</title>

        <para>Mounting using the CIFS URL specification is currently not supported.
        </para>

        <para>The credentials file does not handle usernames or passwords with
                leading space.</para>

        <para>
Note that the typical response to a bug report is a suggestion
to try the latest version first. So please try doing that first,
and always include which versions you use of relevant software
when reporting bugs (minimum: mount.cifs (try mount.cifs -V), kernel (see /proc/version) and
server type you are trying to contact.
</para>
</refsect1>



<refsect1>
        <title>VERSION</title>

        <para>This man page is correct for version 1.52 of 
        the cifs vfs filesystem (roughly Linux kernel 2.6.24).</para>
</refsect1>

<refsect1>
        <title>SEE ALSO</title>
        <para>
        Documentation/filesystems/cifs.txt and fs/cifs/README in the linux kernel
        source tree may contain additional options and information.
</para>
        <para><citerefentry><refentrytitle>umount.cifs</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry></para>

</refsect1>

<refsect1>
        <title>AUTHOR</title>
        
        <para>Steve French</para>

        <para>The syntax and manpage were loosely based on that of smbmount. It 
                was converted to Docbook/XML by Jelmer Vernooij.</para>

        <para>The maintainer of the Linux cifs vfs and the userspace
                tool <emphasis>mount.cifs</emphasis> is <ulink url="mailto:sfrench@samba.org">Steve French</ulink>.
                The <ulink url="mailto:linux-cifs-client@lists.samba.org">Linux CIFS Mailing list</ulink> 
                is the preferred place to ask questions regarding these programs. 
        </para>

</refsect1>

</refentry>