Björn Baumbach [Fri, 15 Jun 2012 10:33:32 +0000 (12:33 +0200)]
docs-xml: vfs_gpfs: add comment "per share option"
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Fri, 15 Jun 2012 10:33:32 +0000 (12:33 +0200)]
docs-xml: vfs_gpfs: fix typo
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Fri, 15 Jun 2012 10:33:32 +0000 (12:33 +0200)]
docs-xml: add gpfs:acl option to vfs_gpfs man page
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Björn Baumbach [Thu, 14 Jun 2012 12:15:44 +0000 (14:15 +0200)]
s3:vfs_gpfs: add "gpfs:acl" option
With "gpfs:acl=no" you can pass the acl calls to the next SMB_VFS module.
Based on a patch from Hans-Dieter Schuster <hans-dieter.schuster@ts.fujitsu.com>
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Volker Lendecke [Tue, 5 Jun 2012 09:28:44 +0000 (11:28 +0200)]
dbwrap: Remove an unnecessary ZERO_STRUCT
We assign the only struct member one line down
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Günther Deschner [Thu, 14 Jun 2012 10:55:55 +0000 (12:55 +0200)]
s3-winbindd: fix the build of idmap_ad modules.
Guenther
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Fri Jun 15 18:16:11 CEST 2012 on sn-devel-104
Andrew Bartlett [Fri, 15 Jun 2012 11:52:35 +0000 (21:52 +1000)]
s3-lib: Fix conversion of lib/events.c to modern tevent names
This corrects an error in
8e31d97c8b62d34aff5d52bfe46dbcc5805dae03.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jun 15 16:25:20 CEST 2012 on sn-devel-104
Volker Lendecke [Fri, 15 Jun 2012 07:51:21 +0000 (09:51 +0200)]
dbwrap: dbwrap_trans_store_uint32->dbwrap_trans_store_uint32_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Fri Jun 15 14:20:04 CEST 2012 on sn-devel-104
Volker Lendecke [Fri, 15 Jun 2012 07:48:20 +0000 (09:48 +0200)]
dbwrap: dbwrap_trans_store_int32->dbwrap_trans_store_int32_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Fri, 15 Jun 2012 07:45:18 +0000 (09:45 +0200)]
dbwrap: dbwrap_trans_change_int32_atomic->dbwrap_trans_change_int32_atomic_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Fri, 15 Jun 2012 07:43:13 +0000 (09:43 +0200)]
dbwrap: dbwrap_change_int32_atomic->dbwrap_change_int32_atomic_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Fri, 15 Jun 2012 07:20:25 +0000 (09:20 +0200)]
dbwrap: dbwrap_trans_change_uint32_atomic->dbwrap_trans_change_uint32_atomic_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Fri, 15 Jun 2012 07:18:17 +0000 (09:18 +0200)]
dbwrap: dbwrap_change_uint32_atomic->dbwrap_change_uint32_atomic_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Fri, 15 Jun 2012 07:09:57 +0000 (09:09 +0200)]
dbwrap: dbwrap_store_uint32->dbwrap_store_uint32_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Thu, 14 Jun 2012 18:39:27 +0000 (20:39 +0200)]
dbwrap: dbwrap_fetch_uint32->dbwrap_fetch_uint32_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Thu, 14 Jun 2012 18:30:16 +0000 (20:30 +0200)]
dbwrap: dbwrap_store_int32->dbwrap_store_int32_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Volker Lendecke [Thu, 14 Jun 2012 18:26:28 +0000 (20:26 +0200)]
dbwrap: dbwrap_fetch_int32->dbwrap_fetch_int32_bystring
Signed-off-by: Michael Adam <obnox@samba.org>
Andrew Bartlett [Fri, 15 Jun 2012 02:34:28 +0000 (12:34 +1000)]
s3-build: Do not write loadparm generated files into the build tree
We need to keep these files away from where waf might see them.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jun 15 11:10:14 CEST 2012 on sn-devel-104
Andrew Bartlett [Mon, 11 Jun 2012 04:53:20 +0000 (14:53 +1000)]
s3-lib: Convert lib/events.c to modern tevent names
Andrew Bartlett [Mon, 11 Jun 2012 01:40:17 +0000 (11:40 +1000)]
docs: document new server role values
Andrew Bartlett [Mon, 11 Jun 2012 00:51:47 +0000 (10:51 +1000)]
s3-auth: rework default auth methods around the lp_server_role() parameter
To cover all the enum values, ROLE_ACTIVE_DIRECTORY_DOMAIN_CONTROLLER
is mapped to the samba4 auth module, and this is no longer required to
be specified in fileserver.conf.
Andrew Bartlett
Andrew Bartlett [Mon, 11 Jun 2012 00:50:08 +0000 (10:50 +1000)]
lib/param: Use server role = 'standalone server' to be consistant with member server
standalne is left as an alias.
Andrew Bartlett
Andrew Bartlett [Mon, 11 Jun 2012 00:40:32 +0000 (10:40 +1000)]
lib/param: make security=domain and security=ads conflict with being a DC
This simplifies our supported configurations down to those that we test and expect
to work. security=domain and domain logons = yes has never made much sense, and
security=ads and domain logons = yes was only ever used in early experiments for
our AD support using smbd.
The correct way to be an AD DC is to set "server role = active directory domain controller"
Andrew Bartlett
Andrew Bartlett [Sun, 10 Jun 2012 12:08:20 +0000 (22:08 +1000)]
lib/param: Create a seperate server role for "active directory domain controller"
This will allow us to detect from the smb.conf if this is a Samba4 AD
DC which will allow smarter handling of (for example) accidentially
starting smbd rather than samba.
To cope with upgrades from existing Samba4 installs, 'domain
controller' is a synonym of 'active directory domain controller' and
new parameters 'classic primary domain controller' and 'classic backup
domain controller' are added.
Andrew Bartlett
Andrew Bartlett [Sun, 10 Jun 2012 06:05:58 +0000 (16:05 +1000)]
s3-auth: Merge SEC_DOMAIN and SEC_ADS cases in creating the default auth module list
Andrew Bartlett [Wed, 13 Jun 2012 23:35:10 +0000 (09:35 +1000)]
s3-auth: Fix system info3 return to be just SID_NT_SYSTEM
The SID for the SYSTEM token should be a fixed value, and not the
administrator. Note however that it will be replaced by the SID of
sec_initial_uid() by the create_local_token() code. Fixing this
requires fixes the other parts of the code that cannot cope with a
token of just SID_NT_SYSTEM.
Andrew Bartlett
Andrew Bartlett [Wed, 13 Jun 2012 23:30:37 +0000 (09:30 +1000)]
s3-auth: Fix system token generation not to dereference pointer as an integer
This continues on from commit
caaebb455cf955f66c2f662c53998c480cb2d6c9
which is marked as being part of bug #8944, ldapsam:trusted and ipasam
and an additional fix for bug #8567
(
0528cb5f3a15b72dcb34ece21a3ffb3e7b8d6eb9).
The problem here was that the primary_gid was simply the pointer result
of dom_sid_parse_talloc() cast to a uint32_t (found by the IRIX cc on
the build farm).
Andrew Bartlett
Andrew Bartlett [Thu, 14 Jun 2012 23:14:26 +0000 (09:14 +1000)]
s3-auth: Give the SYSTEM token all privileges
Stefan Metzmacher [Wed, 11 Apr 2012 14:54:17 +0000 (16:54 +0200)]
s3:smb2_server: remember the request_time on an incoming request
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Jun 15 09:17:33 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 11 Apr 2012 14:54:17 +0000 (16:54 +0200)]
s3:smbd: remember the request_time on an incoming request
metze
Stefan Metzmacher [Thu, 14 Jun 2012 20:15:24 +0000 (22:15 +0200)]
heimdal:lib/hdb: <config.h> needs to be the first header
This should fix build problems on AIX.
metze
Stefan Metzmacher [Thu, 14 Jun 2012 15:52:23 +0000 (17:52 +0200)]
auth.idl: mark confidential attributes as [noprint]
We should allow NDR_PRINT_DEBUG() to log them.
TODO: we could add some more magic which logs it at level 100.
metze
Michael Adam [Thu, 14 Jun 2012 11:34:46 +0000 (13:34 +0200)]
s3:vfs: change files_struct.fnum from int to uint64_t
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Jun 15 05:22:41 CEST 2012 on sn-devel-104
Michael Adam [Thu, 14 Jun 2012 11:31:43 +0000 (13:31 +0200)]
s3:smbd: change trans2.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:28:17 +0000 (13:28 +0200)]
s3:smbd: change smb2_write.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:26:39 +0000 (13:26 +0200)]
s3:smbd: change smb2_setinfo.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:25:29 +0000 (13:25 +0200)]
s3:smbd: change smb2_read.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:23:11 +0000 (13:23 +0200)]
s3:smbd: change smb2_notify.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:22:27 +0000 (13:22 +0200)]
s3:smbd: change smb2_lock.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:20:08 +0000 (13:20 +0200)]
s3:smbd: change smb2_ioctl.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:18:55 +0000 (13:18 +0200)]
s3:smbd: change smb2_getinfo.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:16:44 +0000 (13:16 +0200)]
s3:smbd: change smb2_flush.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:13:59 +0000 (13:13 +0200)]
s3:smbd: change smb2_find.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:13:06 +0000 (13:13 +0200)]
s3:smbd: change smb2_close.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:11:58 +0000 (13:11 +0200)]
s3:smbd: change smb2_break.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 11:10:33 +0000 (13:10 +0200)]
s3:smbd: change reply.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:57:25 +0000 (12:57 +0200)]
s3:smbd: change pipes.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:55:59 +0000 (12:55 +0200)]
s3:smbd: change oplock.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:54:28 +0000 (12:54 +0200)]
s3:smbd: change open.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:52:52 +0000 (12:52 +0200)]
s3:smbd: change nttrans.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:50:14 +0000 (12:50 +0200)]
s3:smbd: change files.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:48:59 +0000 (12:48 +0200)]
s3:smbd: change fake_file.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:47:54 +0000 (12:47 +0200)]
s3:smbd: change blocking.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:41:09 +0000 (12:41 +0200)]
s3:smbd: change aio.c to use fsp_fnum_dbg() for logging fsp->fnum.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:37:21 +0000 (12:37 +0200)]
s3:vfs_default: use fsp_fnum_dbg() for fsp->fnum logging.
Note: it is actually wrong to access the fsp->fnum at all here,
since the fnum is part of the smb layer that should not be used
in the vfs layer. But this is subject be separated more cleanly
in later commits. This change only unifies the logging of fsp->fnum.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:25:43 +0000 (12:25 +0200)]
s3:locking: change locking.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 14 Jun 2012 10:14:32 +0000 (12:14 +0200)]
s3:locking: change brlock.c to use fsp_fnum_dbg() for fsp->fnum logging.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Wed, 13 Jun 2012 15:58:54 +0000 (17:58 +0200)]
s3:lib: add a utility function "fsp_fnum_dbg" for logging the fnum of an fsp
This is to unify logging of an files_struct.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Wed, 13 Jun 2012 15:43:18 +0000 (17:43 +0200)]
s3:lib: elaborate the comment for fsp_str_debug a bit.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Wed, 13 Jun 2012 15:40:22 +0000 (17:40 +0200)]
s3:lib: remove part of a comment for fsp_str_dbg that does not apply any more.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Wed, 13 Jun 2012 15:18:59 +0000 (17:18 +0200)]
s3:smbd: change FNUM_FIELD_INVALID from -1 to 0
This is in preparation for changing the type of files_struct.fnum
to unit64_t.
This can safely be done, since all checks have been converted to
using FNUM_FIELD_INVALID and fsp->fnum is only ever set to either
FNUM_FIELD_INVALID or some i + FILE_HANDLE_OFFSET with i >= 0 and
FILE_HANDLE_OFFSET > 0.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Tue, 12 Jun 2012 15:56:43 +0000 (17:56 +0200)]
s3:smbd: use FNUM_FIELD_INVALID instead of literal -1
This is in preparation of changing fnum to uint64_t
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Tue, 12 Jun 2012 12:35:39 +0000 (14:35 +0200)]
s3:include: define FNUM_FIELD_INVALID - the invalid value for the fnum
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 7 Jun 2012 14:31:14 +0000 (16:31 +0200)]
s3:files: factor fsp_free() out of file_free()
To be reused in the durable reconnect code.
Pair-Programmed-With: Volker Lendecke <vl@samba.org>
Michael Adam [Thu, 7 Jun 2012 14:27:24 +0000 (16:27 +0200)]
s3:files: reorder file_free() a bit
Pair-Programmed-With: Volker Lendecke <vl@samba.org>
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 7 Jun 2012 14:13:36 +0000 (16:13 +0200)]
s3:smbd: refactor fsp_new() out of file_new()
Pair-Programmed-With: Volker Lendecke <vl@samba.org>
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Jelmer Vernooij [Thu, 14 Jun 2012 21:02:28 +0000 (23:02 +0200)]
waf: Update to newer upstream snapshot.
Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date(master): Fri Jun 15 03:12:35 CEST 2012 on sn-devel-104
Jelmer Vernooij [Thu, 14 Jun 2012 21:02:06 +0000 (23:02 +0200)]
update-waf.sh: make mktemp happy by including anything Xes.
Jelmer Vernooij [Sun, 13 May 2012 01:29:48 +0000 (03:29 +0200)]
lib/util: Fix typo in comment.
Björn Jacke [Thu, 14 Jun 2012 17:58:00 +0000 (19:58 +0200)]
make librpc/build_idl.sh more portable
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Thu Jun 14 23:57:40 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 13 Jun 2012 10:13:01 +0000 (12:13 +0200)]
s3:smbd: use fsp_persistent_id() as persistent_file_id part for SMB2 (bug #8995)
It seems to be important to have unique persistent file ids,
because windows clients seem to index files by server_guid + persistent_file_id.
Which may break, if we just have a 16-bit range per connection
and the client connects multiple times.
Based on code from Ira Cooper. Use fsp->fh->gen_id as the persistent
fileid in SMB2.
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Jun 14 22:04:13 CEST 2012 on sn-devel-104
Stefan Metzmacher [Thu, 14 Jun 2012 08:32:43 +0000 (10:32 +0200)]
s3:smbd: add a fsp_persistent_id() function
This calculates a 64-bit value that most likely uniquely identifies
the files_struct globally to the server.
* 32-bit random gen_id
* 16-bit truncated open_time
* 16-bit fnum (valatile_id)
Based on code from Ira Cooper. Use fsp->fh->gen_id as the persistent
fileid in SMB2.
Pair-Programmed-With: Michael Adam <obnox@samba.org>
metze
Stefan Metzmacher [Wed, 13 Jun 2012 13:40:23 +0000 (15:40 +0200)]
s3:smbd: only set fsp->fh->gen_id for a client connection
For faked connections, like dfs and printing, we leave it as 0.
metze
Stefan Metzmacher [Wed, 13 Jun 2012 10:11:51 +0000 (12:11 +0200)]
s3:smbd: try to make fsp->fh->gen_id as globally unique as possible
This makes sure the value is never 0, it's between 1 and UINT32_MAX.
While fsp->fh->gen_id is 'unsigned long' currently (which might by 8 bytes),
there's some oplock code which truncates it to uint32_t (using IVAL()).
Which means we could reuse fsp->fh->gen_id as persistent file id
until we have a final fix, which uses database.
See bug #8995 for more details.
Based on code from Ira Cooper. Ensure fsp->fh->gen_id starts from
a random point. We will use this as the SMB2 persistent_id.
metze
Volker Lendecke [Wed, 13 Jun 2012 07:48:25 +0000 (09:48 +0200)]
s3: Simplify tdb_data_is_cstr a bit
The original code contained rawmemchr for performance reasons. I
would expect the very common strlen routine to be not much worse
performance-wise than rawmemchr. On top, for me this patch simplifies
the expression a bit.
Signed-off-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Jun 14 16:55:58 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 13 Jun 2012 14:31:58 +0000 (16:31 +0200)]
tdb2: remove unused debug_fprintf() macro that breaks the build
The IRIX compiler doesn't support '...' in a macro.
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Jun 14 11:26:15 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 13 Jun 2012 14:31:58 +0000 (16:31 +0200)]
tdb: remove unused debug_fprintf() macro that breaks the build
The IRIX compiler doesn't support '...' in a macro.
metze
Stefan Metzmacher [Mon, 11 Jun 2012 07:11:17 +0000 (09:11 +0200)]
lib/replace: define HAVE_WORKING_STRPTIME instead of REPLACE_STRPTIME
That makes the logic in 'wscript' simpler.
metze
Stefan Metzmacher [Wed, 13 Jun 2012 11:17:46 +0000 (13:17 +0200)]
lib/replace: execute strptime.c tests
They need runtime verification.
metze
Stefan Metzmacher [Wed, 13 Jun 2012 10:41:57 +0000 (12:41 +0200)]
Revert "replace: use replace for non 'samba' compliant strptime"
This reverts commit
4ea7d4694a8353fc55ecd12cb09b9c91ffde7b3f.
A better fix will follow.
metze
Stefan Metzmacher [Mon, 11 Jun 2012 07:07:06 +0000 (09:07 +0200)]
lib/replace: add more condition to add snprintf.c
metze
Stefan Metzmacher [Mon, 11 Jun 2012 06:56:09 +0000 (08:56 +0200)]
Revert "lib/replace: Fix snprintf() override for systems with a broken snprintf()"
This reverts commit
bbc1b0c9853322da10483f72c020fe0dd83b28fa.
A more generic fix will follow.
metze
Stefan Metzmacher [Wed, 13 Jun 2012 11:17:13 +0000 (13:17 +0200)]
lib/replace: s/execute=1/execute=True
metze
Volker Lendecke [Wed, 13 Jun 2012 09:11:39 +0000 (11:11 +0200)]
s3: Fix a comment
The fd count is implicit
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Jun 14 01:53:17 CEST 2012 on sn-devel-104
Björn Jacke [Wed, 13 Jun 2012 20:02:53 +0000 (22:02 +0200)]
replace: fix unused variable warning
e2747fc62c2acbab143c4971469e0a4fc36d8789 fixed ...
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Wed Jun 13 23:57:58 CEST 2012 on sn-devel-104
Björn Jacke [Wed, 13 Jun 2012 19:55:42 +0000 (21:55 +0200)]
Revert "replace: fix unused variable warning"
This reverts commit
e2747fc62c2acbab143c4971469e0a4fc36d8789.
one line slipped into a wrong ifndef ...
Björn Jacke [Wed, 13 Jun 2012 17:28:06 +0000 (19:28 +0200)]
s3: fix build without ads support
when we have no ads support we don't have the ads_get_sid_token symbol used in
this unused code :-)
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Wed Jun 13 21:20:15 CEST 2012 on sn-devel-104
Björn Jacke [Wed, 13 Jun 2012 16:55:56 +0000 (18:55 +0200)]
replace: fix unused variable warning
found by the IRIX compiler
Björn Jacke [Tue, 12 Jun 2012 09:35:29 +0000 (11:35 +0200)]
doc: fix typo uniq → unique
Stefan Metzmacher [Wed, 13 Jun 2012 07:11:42 +0000 (09:11 +0200)]
s4:ntvfs: add '_fn' suffix to all ntvfs_ops function pointers
This hopefully fixes the build on systems where _LARGE_FILES
triggers defines of syscalls e.g. '#define lseek lseek64'
on AIX.
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Jun 13 11:03:15 CEST 2012 on sn-devel-104
Volker Lendecke [Tue, 12 Jun 2012 09:17:58 +0000 (11:17 +0200)]
s3: Use talloc_tos() in more places in dbwrap_util
Signed-off-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Jun 12 15:37:16 CEST 2012 on sn-devel-104
Volker Lendecke [Mon, 11 Jun 2012 12:10:23 +0000 (14:10 +0200)]
s3: Make --pw-nt-hash useable in smbclient
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Jun 12 12:41:10 CEST 2012 on sn-devel-104
Volker Lendecke [Mon, 11 Jun 2012 12:03:16 +0000 (14:03 +0200)]
s3: Add --pw-nt-hash to popt_common_credentials
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Volker Lendecke [Mon, 11 Jun 2012 12:02:03 +0000 (14:02 +0200)]
s3: Add cli_state->pw_nt_hash
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Volker Lendecke [Mon, 11 Jun 2012 12:01:08 +0000 (14:01 +0200)]
s3: Add user_auth_info->use_pw_nt_hash
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Stefan Metzmacher [Mon, 11 Jun 2012 21:47:48 +0000 (23:47 +0200)]
s3-libsmbclient: change vnum to 0.2.0
metze
Volker Lendecke [Mon, 11 Jun 2012 11:29:10 +0000 (13:29 +0200)]
s3-libsmbclient: Add OptionUseNTHash
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Volker Lendecke [Mon, 11 Jun 2012 11:32:07 +0000 (13:32 +0200)]
s3: Add CLI_FULL_CONNECTION_USE_NT_HASH
... as an indicator that the password supplied is the NT hash
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Volker Lendecke [Mon, 11 Jun 2012 11:12:30 +0000 (13:12 +0200)]
S3: Add ntlmssp_set_password_hash
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Volker Lendecke [Mon, 11 Jun 2012 08:15:08 +0000 (10:15 +0200)]
s3-libsmbclient: Make SMBC_call_auth_fn static
Signed-off-by: Stefan Metzmacher <metze@samba.org>