+++ /dev/null
-#!gmake
-#
-prefix = @prefix@
-datarootdir = @datarootdir@
-exec_prefix = @exec_prefix@
-includedir = @includedir@
-libdir = @libdir@
-mandir = @mandir@
-VPATH = @srcdir@:@libreplacedir@
-srcdir = @srcdir@
-builddir = @builddir@
-XSLTPROC = @XSLTPROC@
-INSTALLCMD = @INSTALL@
-CC = @CC@
-CFLAGS = @CFLAGS@ -DHAVE_CONFIG_H= -I. -I@srcdir@
-EXTRA_TARGETS = @DOC_TARGET@
-
-.SUFFIXES: .c .o .3 .3.xml .xml .html
-
-LIBOBJ = @TALLOC_OBJ@ @LIBREPLACEOBJ@
-
-all: showflags libtalloc.a testsuite $(EXTRA_TARGETS)
-
-showflags:
- @echo 'talloc will be compiled with flags:'
- @echo ' CFLAGS = $(CFLAGS)'
- @echo ' LIBS = $(LIBS)'
-
-testsuite: $(LIBOBJ) testsuite.o
- $(CC) $(CFLAGS) -o testsuite testsuite.o $(LIBOBJ) $(LIBS)
-
-libtalloc.a: $(LIBOBJ)
- ar -rv $@ $(LIBOBJ)
- @-ranlib $@
-
-install: all
- ${INSTALLCMD} -d $(DESTDIR)$(libdir)
- ${INSTALLCMD} -d $(DESTDIR)$(libdir)/pkgconfig
- ${INSTALLCMD} -m 755 libtalloc.a $(DESTDIR)$(libdir)
- ${INSTALLCMD} -d $(DESTDIR)${includedir}
- ${INSTALLCMD} -m 644 $(srcdir)/talloc.h $(DESTDIR)$(includedir)
- ${INSTALLCMD} -m 644 talloc.pc $(DESTDIR)$(libdir)/pkgconfig
- if [ -f talloc.3 ];then ${INSTALLCMD} -d $(DESTDIR)$(mandir)/man3; fi
- if [ -f talloc.3 ];then ${INSTALLCMD} -m 644 talloc.3 $(DESTDIR)$(mandir)/man3; fi
-
-doc: talloc.3 talloc.3.html
-
-.3.xml.3:
- -test -z "$(XSLTPROC)" || $(XSLTPROC) --nonet -o $@ http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
-
-.xml.html:
- -test -z "$(XSLTPROC)" || $(XSLTPROC) --nonet -o $@ http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl $<
-
-clean:
- rm -f *~ $(LIBOBJ) libtalloc.a testsuite testsuite.o *.gc?? talloc.3 talloc.3.html
-
-test: testsuite
- ./testsuite
-
-gcov:
- gcov talloc.c
-
-installcheck:
- $(MAKE) test
-
-distclean: clean
- rm -f *~ */*~
- rm -f Makefile
- rm -f config.log config.status config.h config.cache
-
-realdistclean: distclean
- rm -f configure config.h.in
+++ /dev/null
-m4_include(libreplace.m4)
+++ /dev/null
-#!/bin/sh
-
-rm -rf autom4te.cache
-rm -f configure config.h.in
-
-IPATHS="-I libreplace -I lib/replace -I ../libreplace -I ../replace"
-autoconf $IPATHS || exit 1
-autoheader $IPATHS || exit 1
-
-rm -rf autom4te.cache
-
-echo "Now run ./configure and then make."
-exit 0
-
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-# Free Software Foundation, Inc.
-
-timestamp='2009-06-10'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ELF__
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
- # If there is a compiler, see if it is configured for 64-bit objects.
- # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
- # This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- SUN_ARCH="x86_64"
- fi
- fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[456])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep -q __LP64__
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- *:Interix*:[3456]*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T | authenticamd | genuineintel)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- eval $set_cc_for_build
- if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_EABI__
- then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
- fi
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-gnu
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:* | mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef ${UNAME_MACHINE}
- #undef ${UNAME_MACHINE}el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=${UNAME_MACHINE}el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=${UNAME_MACHINE}
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo or32-unknown-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
- padre:Linux:*:*)
- echo sparc-unknown-linux-gnu
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit ;;
- xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i586.
- # Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
- # this is a cross-build.
- echo i586-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- NCR*:*:4.2:* | MPRAS*:*:4.2:*)
- OS_REL='.3'
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
- echo i586-pc-haiku
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
- i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-/* config.h.in. Generated from configure.ac by autoheader. */
-
-/* Whether strndup is broken */
-#undef BROKEN_STRNDUP
-
-/* Whether strnlen is broken */
-#undef BROKEN_STRNLEN
-
-/* Whether dlopen takes unsinged int flags */
-#undef DLOPEN_TAKES_UNSIGNED_FLAGS
-
-/* Define to 1 if you have the <acl/libacl.h> header file. */
-#undef HAVE_ACL_LIBACL_H
-
-/* Define to 1 if you have the <arpa/inet.h> header file. */
-#undef HAVE_ARPA_INET_H
-
-/* Define to 1 if you have the `asprintf' function. */
-#undef HAVE_ASPRINTF
-
-/* Whether the bool type is available */
-#undef HAVE_BOOL
-
-/* Define to 1 if you have the `bzero' function. */
-#undef HAVE_BZERO
-
-/* Whether there is a C99 compliant vsnprintf */
-#undef HAVE_C99_VSNPRINTF
-
-/* Define to 1 if you have the `chroot' function. */
-#undef HAVE_CHROOT
-
-/* Define to 1 if you have the `chsize' function. */
-#undef HAVE_CHSIZE
-
-/* Whether or not we have comparison_fn_t */
-#undef HAVE_COMPARISON_FN_T
-
-/* Define to 1 if you have the <compat.h> header file. */
-#undef HAVE_COMPAT_H
-
-/* Define to 1 if you have the <ctype.h> header file. */
-#undef HAVE_CTYPE_H
-
-/* Define to 1 if you have the declaration of `asprintf', and to 0 if you
- don't. */
-#undef HAVE_DECL_ASPRINTF
-
-/* Define to 1 if you have the declaration of `snprintf', and to 0 if you
- don't. */
-#undef HAVE_DECL_SNPRINTF
-
-/* Define to 1 if you have the declaration of `vasprintf', and to 0 if you
- don't. */
-#undef HAVE_DECL_VASPRINTF
-
-/* Define to 1 if you have the declaration of `vsnprintf', and to 0 if you
- don't. */
-#undef HAVE_DECL_VSNPRINTF
-
-/* Define to 1 if you have the <direct.h> header file. */
-#undef HAVE_DIRECT_H
-
-/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
- */
-#undef HAVE_DIRENT_H
-
-/* Define to 1 if you have the `dlclose' function. */
-#undef HAVE_DLCLOSE
-
-/* Define to 1 if you have the `dlerror' function. */
-#undef HAVE_DLERROR
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the `dlopen' function. */
-#undef HAVE_DLOPEN
-
-/* Define to 1 if you have the `dlsym' function. */
-#undef HAVE_DLSYM
-
-/* Whether errno() is available */
-#undef HAVE_ERRNO_DECL
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the <fnmatch.h> header file. */
-#undef HAVE_FNMATCH_H
-
-/* Define to 1 if you have the `ftruncate' function. */
-#undef HAVE_FTRUNCATE
-
-/* Whether there is a __FUNCTION__ macro */
-#undef HAVE_FUNCTION_MACRO
-
-/* Define to 1 if you have the `getdents' function. */
-#undef HAVE_GETDENTS
-
-/* Define to 1 if you have the `getdirentries' function. */
-#undef HAVE_GETDIRENTRIES
-
-/* Define to 1 if you have the `getpgrp' function. */
-#undef HAVE_GETPGRP
-
-/* Define to 1 if you have the <grp.h> header file. */
-#undef HAVE_GRP_H
-
-/* Whether the compiler supports immediate structures */
-#undef HAVE_IMMEDIATE_STRUCTURES
-
-/* Define to 1 if you have the `initgroups' function. */
-#undef HAVE_INITGROUPS
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the <locale.h> header file. */
-#undef HAVE_LOCALE_H
-
-/* Define to 1 if the system has the type `long long'. */
-#undef HAVE_LONG_LONG
-
-/* Define to 1 if you have the `lstat' function. */
-#undef HAVE_LSTAT
-
-/* Define to 1 if you have the `memcpy' function. */
-#undef HAVE_MEMCPY
-
-/* Define to 1 if you have the `memmove' function. */
-#undef HAVE_MEMMOVE
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `memset' function. */
-#undef HAVE_MEMSET
-
-/* Define if target mkdir supports mode option */
-#undef HAVE_MKDIR_MODE
-
-/* Define to 1 if you have the `mkdtemp' function. */
-#undef HAVE_MKDTEMP
-
-/* Define to 1 if you have the `mktime' function. */
-#undef HAVE_MKTIME
-
-/* Whether mmap works */
-#undef HAVE_MMAP
-
-/* Define to 1 if you have the <mntent.h> header file. */
-#undef HAVE_MNTENT_H
-
-/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
-#undef HAVE_NDIR_H
-
-/* Define to 1 if you have the <netdb.h> header file. */
-#undef HAVE_NETDB_H
-
-/* Define to 1 if you have the <netinet/in.h> header file. */
-#undef HAVE_NETINET_IN_H
-
-/* Define to 1 if you have the <netinet/in_ip.h> header file. */
-#undef HAVE_NETINET_IN_IP_H
-
-/* Define to 1 if you have the <netinet/in_systm.h> header file. */
-#undef HAVE_NETINET_IN_SYSTM_H
-
-/* Define to 1 if you have the <netinet/ip.h> header file. */
-#undef HAVE_NETINET_IP_H
-
-/* Define to 1 if you have the <netinet/tcp.h> header file. */
-#undef HAVE_NETINET_TCP_H
-
-/* usability of net/if.h */
-#undef HAVE_NET_IF_H
-
-/* Whether the open(2) accepts O_DIRECT */
-#undef HAVE_OPEN_O_DIRECT
-
-/* Define to 1 if you have the `pipe' function. */
-#undef HAVE_PIPE
-
-/* Define to 1 if you have the `pread' function. */
-#undef HAVE_PREAD
-
-/* Define to 1 if you have the `printf' function. */
-#undef HAVE_PRINTF
-
-/* Define to 1 if you have the <pwd.h> header file. */
-#undef HAVE_PWD_H
-
-/* Define to 1 if you have the `pwrite' function. */
-#undef HAVE_PWRITE
-
-/* Define to 1 if you have the `rand' function. */
-#undef HAVE_RAND
-
-/* Define to 1 if you have the `random' function. */
-#undef HAVE_RANDOM
-
-/* Define to 1 if you have the `rename' function. */
-#undef HAVE_RENAME
-
-/* Whether mkstemp is secure */
-#undef HAVE_SECURE_MKSTEMP
-
-/* Define to 1 if you have the `setbuffer' function. */
-#undef HAVE_SETBUFFER
-
-/* Define to 1 if you have the `setegid' function. */
-#undef HAVE_SETEGID
-
-/* Define to 1 if you have the `setenv' function. */
-#undef HAVE_SETENV
-
-/* Whether setenv() is available */
-#undef HAVE_SETENV_DECL
-
-/* Define to 1 if you have the `seteuid' function. */
-#undef HAVE_SETEUID
-
-/* Define to 1 if you have the <setjmp.h> header file. */
-#undef HAVE_SETJMP_H
-
-/* Define to 1 if you have the `setlinebuf' function. */
-#undef HAVE_SETLINEBUF
-
-/* Define to 1 if you have the `setresgid' function. */
-#undef HAVE_SETRESGID
-
-/* Whether setresgid() is available */
-#undef HAVE_SETRESGID_DECL
-
-/* Define to 1 if you have the `setresuid' function. */
-#undef HAVE_SETRESUID
-
-/* Whether setresuid() is available */
-#undef HAVE_SETRESUID_DECL
-
-/* Define to 1 if you have the <shadow.h> header file. */
-#undef HAVE_SHADOW_H
-
-/* Whether we have the atomic_t variable type */
-#undef HAVE_SIG_ATOMIC_T_TYPE
-
-/* Define to 1 if you have the `snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the `socketpair' function. */
-#undef HAVE_SOCKETPAIR
-
-/* Define to 1 if you have the `srand' function. */
-#undef HAVE_SRAND
-
-/* Define to 1 if you have the `srandom' function. */
-#undef HAVE_SRANDOM
-
-/* Define to 1 if you have the <standards.h> header file. */
-#undef HAVE_STANDARDS_H
-
-/* Define to 1 if you have the <stdarg.h> header file. */
-#undef HAVE_STDARG_H
-
-/* Define to 1 if you have the <stdbool.h> header file. */
-#undef HAVE_STDBOOL_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdio.h> header file. */
-#undef HAVE_STDIO_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strcasestr' function. */
-#undef HAVE_STRCASESTR
-
-/* Define to 1 if you have the `strdup' function. */
-#undef HAVE_STRDUP
-
-/* Define to 1 if you have the `strerror' function. */
-#undef HAVE_STRERROR
-
-/* Define to 1 if you have the `strftime' function. */
-#undef HAVE_STRFTIME
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strlcat' function. */
-#undef HAVE_STRLCAT
-
-/* Define to 1 if you have the `strlcpy' function. */
-#undef HAVE_STRLCPY
-
-/* Define to 1 if you have the `strndup' function. */
-#undef HAVE_STRNDUP
-
-/* Define to 1 if you have the `strnlen' function. */
-#undef HAVE_STRNLEN
-
-/* Define to 1 if you have the `strtok_r' function. */
-#undef HAVE_STRTOK_R
-
-/* Define to 1 if you have the `strtoll' function. */
-#undef HAVE_STRTOLL
-
-/* Define to 1 if you have the `strtoq' function. */
-#undef HAVE_STRTOQ
-
-/* Define to 1 if you have the `strtoull' function. */
-#undef HAVE_STRTOULL
-
-/* Define to 1 if you have the `strtouq' function. */
-#undef HAVE_STRTOUQ
-
-/* Define to 1 if `st_rdev' is member of `struct stat'. */
-#undef HAVE_STRUCT_STAT_ST_RDEV
-
-/* Define to 1 if your `struct stat' has `st_rdev'. Deprecated, use
- `HAVE_STRUCT_STAT_ST_RDEV' instead. */
-#undef HAVE_ST_RDEV
-
-/* Define to 1 if you have the `syslog' function. */
-#undef HAVE_SYSLOG
-
-/* Define to 1 if you have the <syslog.h> header file. */
-#undef HAVE_SYSLOG_H
-
-/* Define to 1 if you have the <sys/acl.h> header file. */
-#undef HAVE_SYS_ACL_H
-
-/* Define to 1 if you have the <sys/capability.h> header file. */
-#undef HAVE_SYS_CAPABILITY_H
-
-/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
- */
-#undef HAVE_SYS_DIR_H
-
-/* Define to 1 if you have the <sys/fcntl.h> header file. */
-#undef HAVE_SYS_FCNTL_H
-
-/* Define to 1 if you have the <sys/filio.h> header file. */
-#undef HAVE_SYS_FILIO_H
-
-/* Define to 1 if you have the <sys/filsys.h> header file. */
-#undef HAVE_SYS_FILSYS_H
-
-/* Define to 1 if you have the <sys/fs/s5param.h> header file. */
-#undef HAVE_SYS_FS_S5PARAM_H
-
-/* Define to 1 if you have the <sys/id.h> header file. */
-#undef HAVE_SYS_ID_H
-
-/* Define to 1 if you have the <sys/ioctl.h> header file. */
-#undef HAVE_SYS_IOCTL_H
-
-/* Define to 1 if you have the <sys/ipc.h> header file. */
-#undef HAVE_SYS_IPC_H
-
-/* Define to 1 if you have the <sys/mman.h> header file. */
-#undef HAVE_SYS_MMAN_H
-
-/* Define to 1 if you have the <sys/mode.h> header file. */
-#undef HAVE_SYS_MODE_H
-
-/* Define to 1 if you have the <sys/mount.h> header file. */
-#undef HAVE_SYS_MOUNT_H
-
-/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
- */
-#undef HAVE_SYS_NDIR_H
-
-/* Define to 1 if you have the <sys/param.h> header file. */
-#undef HAVE_SYS_PARAM_H
-
-/* Define to 1 if you have the <sys/priv.h> header file. */
-#undef HAVE_SYS_PRIV_H
-
-/* Define to 1 if you have the <sys/resource.h> header file. */
-#undef HAVE_SYS_RESOURCE_H
-
-/* Define to 1 if you have the <sys/security.h> header file. */
-#undef HAVE_SYS_SECURITY_H
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H
-
-/* Define to 1 if you have the <sys/shm.h> header file. */
-#undef HAVE_SYS_SHM_H
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define to 1 if you have the <sys/sockio.h> header file. */
-#undef HAVE_SYS_SOCKIO_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/syslog.h> header file. */
-#undef HAVE_SYS_SYSLOG_H
-
-/* Define to 1 if you have the <sys/termio.h> header file. */
-#undef HAVE_SYS_TERMIO_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <sys/un.h> header file. */
-#undef HAVE_SYS_UN_H
-
-/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
-#undef HAVE_SYS_WAIT_H
-
-/* Define to 1 if you have the <termios.h> header file. */
-#undef HAVE_TERMIOS_H
-
-/* Define to 1 if you have the <termio.h> header file. */
-#undef HAVE_TERMIO_H
-
-/* Define to 1 if you have the `timegm' function. */
-#undef HAVE_TIMEGM
-
-/* Define to 1 if you have the <time.h> header file. */
-#undef HAVE_TIME_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `unsetenv' function. */
-#undef HAVE_UNSETENV
-
-/* Define to 1 if you have the `usleep' function. */
-#undef HAVE_USLEEP
-
-/* Define to 1 if you have the <utime.h> header file. */
-#undef HAVE_UTIME_H
-
-/* Define to 1 if you have the <vararg.h> header file. */
-#undef HAVE_VARARG_H
-
-/* Define to 1 if you have the `vasprintf' function. */
-#undef HAVE_VASPRINTF
-
-/* Whether va_copy() is available */
-#undef HAVE_VA_COPY
-
-/* Whether the C compiler understands volatile */
-#undef HAVE_VOLATILE
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Define to 1 if you have the `vsyslog' function. */
-#undef HAVE_VSYSLOG
-
-/* Define to 1 if you have the `waitpid' function. */
-#undef HAVE_WAITPID
-
-/* Define to 1 if you have the <windows.h> header file. */
-#undef HAVE_WINDOWS_H
-
-/* Define to 1 if you have the <winsock2.h> header file. */
-#undef HAVE_WINSOCK2_H
-
-/* Define to 1 if you have the <ws2tcpip.h> header file. */
-#undef HAVE_WS2TCPIP_H
-
-/* Whether the _Bool type is available */
-#undef HAVE__Bool
-
-/* Whether the __VA_ARGS__ macro is available */
-#undef HAVE__VA_ARGS__MACRO
-
-/* Define to 1 if you have the `__strtoll' function. */
-#undef HAVE___STRTOLL
-
-/* Define to 1 if you have the `__strtoull' function. */
-#undef HAVE___STRTOULL
-
-/* Whether __va_copy() is available */
-#undef HAVE___VA_COPY
-
-/* Whether there is a __func__ macro */
-#undef HAVE_func_MACRO
-
-/* Whether MMAP is broken */
-#undef MMAP_BLACKLIST
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Whether getpass should be replaced */
-#undef REPLACE_GETPASS
-
-/* Whether inet_ntoa should be replaced */
-#undef REPLACE_INET_NTOA
-
-/* replace readdir */
-#undef REPLACE_READDIR
-
-/* replace readdir using getdents() */
-#undef REPLACE_READDIR_GETDENTS
-
-/* replace readdir using getdirentries() */
-#undef REPLACE_READDIR_GETDIRENTRIES
-
-/* Whether strptime should be replaced */
-#undef REPLACE_STRPTIME
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#undef RETSIGTYPE
-
-/* Whether seekdir returns an int */
-#undef SEEKDIR_RETURNS_INT
-
-/* The size of `char', as computed by sizeof. */
-#undef SIZEOF_CHAR
-
-/* The size of `int', as computed by sizeof. */
-#undef SIZEOF_INT
-
-/* The size of `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* The size of `long long', as computed by sizeof. */
-#undef SIZEOF_LONG_LONG
-
-/* The size of `off_t', as computed by sizeof. */
-#undef SIZEOF_OFF_T
-
-/* The size of `short', as computed by sizeof. */
-#undef SIZEOF_SHORT
-
-/* The size of `size_t', as computed by sizeof. */
-#undef SIZEOF_SIZE_T
-
-/* The size of `ssize_t', as computed by sizeof. */
-#undef SIZEOF_SSIZE_T
-
-/* The size of `void *', as computed by sizeof. */
-#undef SIZEOF_VOID_P
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Whether telldir takes a const pointer */
-#undef TELLDIR_TAKES_CONST_DIR
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Define to 1 if your processor stores words with the most significant byte
- first (like Motorola and SPARC, unlike Intel and VAX). */
-#undef WORDS_BIGENDIAN
-
-/* Define to 1 if on AIX 3.
- System headers sometimes define this.
- We just want to avoid a redefinition error message. */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Enable GNU extensions on systems that have them. */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-#ifndef _OSF_SOURCE
-# define _OSF_SOURCE 1
-#endif
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
- this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Whether to enable POSIX support */
-#undef _POSIX_C_SOURCE
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-#undef _POSIX_SOURCE
-
-/* Whether to enable System V compatibility */
-#undef _SYSV
-
-#ifndef _XOPEN_SOURCE_EXTENDED
-# define _XOPEN_SOURCE_EXTENDED 1
-#endif
-
-/* Enable extensions on Solaris. */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef gid_t
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-/* Define to `unsigned' if <sys/types.h> does not define. */
-#undef ino_t
-
-/* Define to `short' if <sys/types.h> does not define. */
-#undef int16_t
-
-/* Define to `long' if <sys/types.h> does not define. */
-#undef int32_t
-
-/* Define to `long long' if <sys/types.h> does not define. */
-#undef int64_t
-
-/* Define to `char' if <sys/types.h> does not define. */
-#undef int8_t
-
-/* Define to `unsigned long long' if <sys/types.h> does not define. */
-#undef intptr_t
-
-/* Define to `off_t' if <sys/types.h> does not define. */
-#undef loff_t
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef mode_t
-
-/* Define to `long int' if <sys/types.h> does not define. */
-#undef off_t
-
-/* Define to `loff_t' if <sys/types.h> does not define. */
-#undef offset_t
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef pid_t
-
-/* Define to `unsigned long long' if <sys/types.h> does not define. */
-#undef ptrdiff_t
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t
-
-/* Socket length type */
-#undef socklen_t
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef ssize_t
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef uid_t
-
-/* Define to `unsigned short' if <sys/types.h> does not define. */
-#undef uint16_t
-
-/* Define to `unsigned long' if <sys/types.h> does not define. */
-#undef uint32_t
-
-/* Define to `unsigned long long' if <sys/types.h> does not define. */
-#undef uint64_t
-
-/* Define to `unsigned char' if <sys/types.h> does not define. */
-#undef uint8_t
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef uint_t
+++ /dev/null
-################################################
-# Start LIBRARY LIBTALLOC
-[LIBRARY::LIBTALLOC]
-VERSION = 0.0.1
-SO_VERSION = 0
-OBJ_FILES = talloc.o
-MANPAGE = talloc.3
-CFLAGS = -Ilib/talloc
-PUBLIC_HEADERS = talloc.h
-DESCRIPTION = A hierarchical pool based memory system with destructors
-#
-# End LIBRARY LIBTALLOC
-################################################
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-# Free Software Foundation, Inc.
-
-timestamp='2009-06-11'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -bluegene*)
- os=-cnk
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fido | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | lm32 \
- | m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep | metag \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64octeon | mips64octeonel \
- | mips64orion | mips64orionel \
- | mips64r5900 | mips64r5900el \
- | mips64vr | mips64vrel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | moxie \
- | mt \
- | msp430 \
- | nios | nios2 \
- | ns16k | ns32k \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k | z80)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* | avr32-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | lm32-* \
- | m32c-* | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64octeon-* | mips64octeonel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64r5900-* | mips64r5900el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa*-* \
- | ymp-* \
- | z8k-* | z80-*)
- ;;
- # Recognize the basic CPU types without company name, with glob match.
- xtensa*)
- basic_machine=$basic_machine-unknown
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aros)
- basic_machine=i386-pc
- os=-aros
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- blackfin)
- basic_machine=bfin-unknown
- os=-linux
- ;;
- blackfin-*)
- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- bluegene*)
- basic_machine=powerpc-ibm
- os=-cnk
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- cegcc)
- basic_machine=arm-unknown
- os=-cegcc
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16)
- basic_machine=cr16-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dicos)
- basic_machine=i686-pc
- os=-dicos
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m68knommu)
- basic_machine=m68k-unknown
- os=-linux
- ;;
- m68knommu-*)
- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- mingw32ce)
- basic_machine=arm-unknown
- os=-mingw32ce
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- parisc)
- basic_machine=hppa-unknown
- os=-linux
- ;;
- parisc-*)
- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh5el)
- basic_machine=sh5le-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tile*)
- basic_machine=tile-unknown
- os=-linux-gnu
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- z80-*-coff)
- basic_machine=z80-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -kopensolaris* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -dicos*)
- os=-dicos
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- score-*)
- os=-elf
- ;;
- spu-*)
- os=-elf
- ;;
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mep-*)
- os=-elf
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -cnk*|-aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-AC_PREREQ(2.50)
-AC_INIT(talloc, 2.0.3)
-AC_CONFIG_SRCDIR([talloc.c])
-AC_SUBST(datarootdir)
-AC_CONFIG_HEADER(config.h)
-
-TALLOC_VERSION=${PACKAGE_VERSION}
-TALLOC_VERSION_MAJOR=`echo ${PACKAGE_VERSION} | cut -d '.' -f1`
-TALLOC_VERSION_MINOR=`echo ${PACKAGE_VERSION} | cut -d '.' -f2`
-TALLOC_VERSION_RELEASE=`echo ${PACKAGE_VERSION} | cut -d '.' -f3`
-
-AC_SUBST(TALLOC_VERSION)
-AC_SUBST(TALLOC_VERSION_MAJOR)
-AC_SUBST(TALLOC_VERSION_MINOR)
-AC_SUBST(TALLOC_VERSION_RELEASE)
-
-AC_DEFINE_UNQUOTED(TALLOC_BUILD_VERSION_MAJOR,
- [${TALLOC_VERSION_MAJOR}],
- [talloc major version])
-AC_DEFINE_UNQUOTED(TALLOC_BUILD_VERSION_MINOR,
- [${TALLOC_VERSION_MINOR}],
- [talloc minor version])
-AC_DEFINE_UNQUOTED(TALLOC_BUILD_VERSION_RELEASE,
- [${TALLOC_VERSION_RELEASE}],
- [talloc release version])
-
-AC_LIBREPLACE_ALL_CHECKS
-
-AC_LD_PICFLAG
-AC_LD_SHLIBEXT
-AC_LD_SONAMEFLAG
-AC_LD_VERSIONSCRIPT
-AC_LIBREPLACE_SHLD
-AC_LIBREPLACE_SHLD_FLAGS
-
-m4_include(libtalloc.m4)
-m4_include(compat/talloc_compat1.m4)
-
-AC_PATH_PROG(XSLTPROC,xsltproc)
-DOC_TARGET=""
-if test -n "$XSLTPROC"; then
- DOC_TARGET=doc
-fi
-AC_SUBST(DOC_TARGET)
-
-m4_include(build_macros.m4)
-BUILD_WITH_SHARED_BUILD_DIR
-
-AC_OUTPUT(Makefile talloc.pc)
+++ /dev/null
-.\" Title: talloc
-.\" Author:
-.\" Generator: DocBook XSL Stylesheets v1.71.0 <http://docbook.sf.net/>
-.\" Date: 02/26/2007
-.\" Manual:
-.\" Source:
-.\"
-.TH "TALLOC" "3" "02/26/2007" "" ""
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.SH "NAME"
-talloc \- hierarchical reference counted memory pool system with destructors
-.SH "SYNOPSIS"
-.sp
-.RS 3n
-.nf
-#include <talloc/talloc.h>
-.fi
-.RE
-.SH "DESCRIPTION"
-.PP
-If you are used to talloc from Samba3 then please read this carefully, as talloc has changed a lot.
-.PP
-The new talloc is a hierarchical, reference counted memory pool system with destructors. Quite a mouthful really, but not too bad once you get used to it.
-.PP
-Perhaps the biggest change from Samba3 is that there is no distinction between a "talloc context" and a "talloc pointer". Any pointer returned from talloc() is itself a valid talloc context. This means you can do this:
-.sp
-.RS 3n
-.nf
- struct foo *X = talloc(mem_ctx, struct foo);
- X\->name = talloc_strdup(X, "foo");
-
-.fi
-.RE
-.PP
-and the pointer
-X\->name
-would be a "child" of the talloc context
-X
-which is itself a child of
-mem_ctx. So if you do
-talloc_free(mem_ctx)
-then it is all destroyed, whereas if you do
-talloc_free(X)
-then just
-X
-and
-X\->name
-are destroyed, and if you do
-talloc_free(X\->name)
-then just the name element of
-X
-is destroyed.
-.PP
-If you think about this, then what this effectively gives you is an n\-ary tree, where you can free any part of the tree with talloc_free().
-.PP
-If you find this confusing, then I suggest you run the
-testsuite
-program to watch talloc in action. You may also like to add your own tests to
-testsuite.c
-to clarify how some particular situation is handled.
-.SH "TALLOC API"
-.PP
-The following is a complete guide to the talloc API. Read it all at least twice.
-.SS "(type *)talloc(const void *ctx, type);"
-.PP
-The talloc() macro is the core of the talloc library. It takes a memory
-\fIctx\fR
-and a
-\fItype\fR, and returns a pointer to a new area of memory of the given
-\fItype\fR.
-.PP
-The returned pointer is itself a talloc context, so you can use it as the
-\fIctx\fR
-argument to more calls to talloc() if you wish.
-.PP
-The returned pointer is a "child" of the supplied context. This means that if you talloc_free() the
-\fIctx\fR
-then the new child disappears as well. Alternatively you can free just the child.
-.PP
-The
-\fIctx\fR
-argument to talloc() can be NULL, in which case a new top level context is created.
-.SS "void *talloc_size(const void *ctx, size_t size);"
-.PP
-The function talloc_size() should be used when you don't have a convenient type to pass to talloc(). Unlike talloc(), it is not type safe (as it returns a void *), so you are on your own for type checking.
-.SS "(typeof(ptr)) talloc_ptrtype(const void *ctx, ptr);"
-.PP
-The talloc_ptrtype() macro should be used when you have a pointer and want to allocate memory to point at with this pointer. When compiling with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_size() and talloc_get_name() will return the current location in the source file. and not the type.
-.SS "int talloc_free(void *ptr);"
-.PP
-The talloc_free() function frees a piece of talloc memory, and all its children. You can call talloc_free() on any pointer returned by talloc().
-.PP
-The return value of talloc_free() indicates success or failure, with 0 returned for success and \-1 for failure. The only possible failure condition is if
-\fIptr\fR
-had a destructor attached to it and the destructor returned \-1. See
-\(lqtalloc_set_destructor()\(rq
-for details on destructors.
-.PP
-If this pointer has an additional parent when talloc_free() is called then the memory is not actually released, but instead the most recently established parent is destroyed. See
-\(lqtalloc_reference()\(rq
-for details on establishing additional parents.
-.PP
-For more control on which parent is removed, see
-\(lqtalloc_unlink()\(rq.
-.PP
-talloc_free() operates recursively on its children.
-.SS "void *talloc_reference(const void *ctx, const void *ptr);"
-.PP
-The talloc_reference() function makes
-\fIctx\fR
-an additional parent of
-\fIptr\fR.
-.PP
-The return value of talloc_reference() is always the original pointer
-\fIptr\fR, unless talloc ran out of memory in creating the reference in which case it will return NULL (each additional reference consumes around 48 bytes of memory on intel x86 platforms).
-.PP
-If
-\fIptr\fR
-is NULL, then the function is a no\-op, and simply returns NULL.
-.PP
-After creating a reference you can free it in one of the following ways:
-.PP
-.TP 3n
-\(bu
-you can talloc_free() any parent of the original pointer. That will reduce the number of parents of this pointer by 1, and will cause this pointer to be freed if it runs out of parents.
-.TP 3n
-\(bu
-you can talloc_free() the pointer itself. That will destroy the most recently established parent to the pointer and leave the pointer as a child of its current parent.
-.sp
-.RE
-.PP
-For more control on which parent to remove, see
-\(lqtalloc_unlink()\(rq.
-.SS "int talloc_unlink(const void *ctx, const void *ptr);"
-.PP
-The talloc_unlink() function removes a specific parent from
-\fIptr\fR. The
-\fIctx\fR
-passed must either be a context used in talloc_reference() with this pointer, or must be a direct parent of ptr.
-.PP
-Note that if the parent has already been removed using talloc_free() then this function will fail and will return \-1. Likewise, if
-\fIptr\fR
-is NULL, then the function will make no modifications and return \-1.
-.PP
-Usually you can just use talloc_free() instead of talloc_unlink(), but sometimes it is useful to have the additional control on which parent is removed.
-.SS "void talloc_set_destructor(const void *ptr, int (*destructor)(void *));"
-.PP
-The function talloc_set_destructor() sets the
-\fIdestructor\fR
-for the pointer
-\fIptr\fR. A
-\fIdestructor\fR
-is a function that is called when the memory used by a pointer is about to be released. The destructor receives
-\fIptr\fR
-as an argument, and should return 0 for success and \-1 for failure.
-.PP
-The
-\fIdestructor\fR
-can do anything it wants to, including freeing other pieces of memory. A common use for destructors is to clean up operating system resources (such as open file descriptors) contained in the structure the destructor is placed on.
-.PP
-You can only place one destructor on a pointer. If you need more than one destructor then you can create a zero\-length child of the pointer and place an additional destructor on that.
-.PP
-To remove a destructor call talloc_set_destructor() with NULL for the destructor.
-.PP
-If your destructor attempts to talloc_free() the pointer that it is the destructor for then talloc_free() will return \-1 and the free will be ignored. This would be a pointless operation anyway, as the destructor is only called when the memory is just about to go away.
-.SS "int talloc_increase_ref_count(const void *\fIptr\fR);"
-.PP
-The talloc_increase_ref_count(\fIptr\fR) function is exactly equivalent to:
-.sp
-.RS 3n
-.nf
-talloc_reference(NULL, ptr);
-.fi
-.RE
-.PP
-You can use either syntax, depending on which you think is clearer in your code.
-.PP
-It returns 0 on success and \-1 on failure.
-.SS "size_t talloc_reference_count(const void *\fIptr\fR);"
-.PP
-Return the number of references to the pointer.
-.SS "void talloc_set_name(const void *ptr, const char *fmt, ...);"
-.PP
-Each talloc pointer has a "name". The name is used principally for debugging purposes, although it is also possible to set and get the name on a pointer in as a way of "marking" pointers in your code.
-.PP
-The main use for names on pointer is for "talloc reports". See
-\(lqtalloc_report_depth_cb()\(rq,
-\(lqtalloc_report_depth_file()\(rq,
-\(lqtalloc_report()\(rq
-\(lqtalloc_report()\(rq
-and
-\(lqtalloc_report_full()\(rq
-for details. Also see
-\(lqtalloc_enable_leak_report()\(rq
-and
-\(lqtalloc_enable_leak_report_full()\(rq.
-.PP
-The talloc_set_name() function allocates memory as a child of the pointer. It is logically equivalent to:
-.sp
-.RS 3n
-.nf
-talloc_set_name_const(ptr, talloc_asprintf(ptr, fmt, ...));
-.fi
-.RE
-.PP
-Note that multiple calls to talloc_set_name() will allocate more memory without releasing the name. All of the memory is released when the ptr is freed using talloc_free().
-.SS "void talloc_set_name_const(const void *\fIptr\fR, const char *\fIname\fR);"
-.PP
-The function talloc_set_name_const() is just like talloc_set_name(), but it takes a string constant, and is much faster. It is extensively used by the "auto naming" macros, such as talloc_p().
-.PP
-This function does not allocate any memory. It just copies the supplied pointer into the internal representation of the talloc ptr. This means you must not pass a
-\fIname\fR
-pointer to memory that will disappear before
-\fIptr\fR
-is freed with talloc_free().
-.SS "void *talloc_named(const void *\fIctx\fR, size_t \fIsize\fR, const char *\fIfmt\fR, ...);"
-.PP
-The talloc_named() function creates a named talloc pointer. It is equivalent to:
-.sp
-.RS 3n
-.nf
-ptr = talloc_size(ctx, size);
-talloc_set_name(ptr, fmt, ....);
-.fi
-.RE
-.SS "void *talloc_named_const(const void *\fIctx\fR, size_t \fIsize\fR, const char *\fIname\fR);"
-.PP
-This is equivalent to:
-.sp
-.RS 3n
-.nf
-ptr = talloc_size(ctx, size);
-talloc_set_name_const(ptr, name);
-.fi
-.RE
-.SS "const char *talloc_get_name(const void *\fIptr\fR);"
-.PP
-This returns the current name for the given talloc pointer,
-\fIptr\fR. See
-\(lqtalloc_set_name()\(rq
-for details.
-.SS "void *talloc_init(const char *\fIfmt\fR, ...);"
-.PP
-This function creates a zero length named talloc context as a top level context. It is equivalent to:
-.sp
-.RS 3n
-.nf
-talloc_named(NULL, 0, fmt, ...);
-.fi
-.RE
-.SS "void *talloc_new(void *\fIctx\fR);"
-.PP
-This is a utility macro that creates a new memory context hanging off an exiting context, automatically naming it "talloc_new: __location__" where __location__ is the source line it is called from. It is particularly useful for creating a new temporary working context.
-.SS "(\fItype\fR *)talloc_realloc(const void *\fIctx\fR, void *\fIptr\fR, \fItype\fR, \fIcount\fR);"
-.PP
-The talloc_realloc() macro changes the size of a talloc pointer. It has the following equivalences:
-.sp
-.RS 3n
-.nf
-talloc_realloc(ctx, NULL, type, 1) ==> talloc(ctx, type);
-talloc_realloc(ctx, ptr, type, 0) ==> talloc_free(ptr);
-.fi
-.RE
-.PP
-The
-\fIctx\fR
-argument is only used if
-\fIptr\fR
-is not NULL, otherwise it is ignored.
-.PP
-talloc_realloc() returns the new pointer, or NULL on failure. The call will fail either due to a lack of memory, or because the pointer has more than one parent (see
-\(lqtalloc_reference()\(rq).
-.SS "void *talloc_realloc_size(const void *ctx, void *ptr, size_t size);"
-.PP
-the talloc_realloc_size() function is useful when the type is not known so the type\-safe talloc_realloc() cannot be used.
-.SS "TYPE *talloc_steal(const void *\fInew_ctx\fR, const TYPE *\fIptr\fR);"
-.PP
-The talloc_steal() function changes the parent context of a talloc pointer. It is typically used when the context that the pointer is currently a child of is going to be freed and you wish to keep the memory for a longer time.
-.PP
-The talloc_steal() function returns the pointer that you pass it. It does not have any failure modes.
-.PP
-NOTE: It is possible to produce loops in the parent/child relationship if you are not careful with talloc_steal(). No guarantees are provided as to your sanity or the safety of your data if you do this.
-.SS "TYPE *talloc_move(const void *\fInew_ctx\fR, TYPE **\fIptr\fR);"
-.PP
-The talloc_move() function is a wrapper around talloc_steal() which zeros the source pointer after the move. This avoids a potential source of bugs where a programmer leaves a pointer in two structures, and uses the pointer from the old structure after it has been moved to a new one.
-.SS "size_t talloc_total_size(const void *\fIptr\fR);"
-.PP
-The talloc_total_size() function returns the total size in bytes used by this pointer and all child pointers. Mostly useful for debugging.
-.PP
-Passing NULL is allowed, but it will only give a meaningful result if talloc_enable_leak_report() or talloc_enable_leak_report_full() has been called.
-.SS "size_t talloc_total_blocks(const void *\fIptr\fR);"
-.PP
-The talloc_total_blocks() function returns the total memory block count used by this pointer and all child pointers. Mostly useful for debugging.
-.PP
-Passing NULL is allowed, but it will only give a meaningful result if talloc_enable_leak_report() or talloc_enable_leak_report_full() has been called.
-.SS "void talloc_report(const void *ptr, FILE *f);"
-.PP
-The talloc_report() function prints a summary report of all memory used by
-\fIptr\fR. One line of report is printed for each immediate child of ptr, showing the total memory and number of blocks used by that child.
-.PP
-You can pass NULL for the pointer, in which case a report is printed for the top level memory context, but only if talloc_enable_leak_report() or talloc_enable_leak_report_full() has been called.
-.SS "void talloc_report_full(const void *\fIptr\fR, FILE *\fIf\fR);"
-.PP
-This provides a more detailed report than talloc_report(). It will recursively print the entire tree of memory referenced by the pointer. References in the tree are shown by giving the name of the pointer that is referenced.
-.PP
-You can pass NULL for the pointer, in which case a report is printed for the top level memory context, but only if talloc_enable_leak_report() or talloc_enable_leak_report_full() has been called.
-.SS ""
-.HP 28
-.BI "void talloc_report_depth_cb(" "const\ void\ *ptr" ", " "int\ depth" ", " "int\ max_depth" ", " "void\ (*callback)(const\ void\ *ptr,\ int\ depth,\ int\ max_depth,\ int\ is_ref,\ void\ *priv)" ", " "void\ *priv" ");"
-.PP
-This provides a more flexible reports than talloc_report(). It will recursively call the callback for the entire tree of memory referenced by the pointer. References in the tree are passed with
-\fIis_ref = 1\fR
-and the pointer that is referenced.
-.PP
-You can pass NULL for the pointer, in which case a report is printed for the top level memory context, but only if talloc_enable_leak_report() or talloc_enable_leak_report_full() has been called.
-.PP
-The recursion is stopped when depth >= max_depth. max_depth = \-1 means only stop at leaf nodes.
-.SS ""
-.HP 30
-.BI "void talloc_report_depth_file(" "const\ void\ *ptr" ", " "int\ depth" ", " "int\ max_depth" ", " "FILE\ *f" ");"
-.PP
-This provides a more flexible reports than talloc_report(). It will let you specify the depth and max_depth.
-.SS "void talloc_enable_leak_report(void);"
-.PP
-This enables calling of talloc_report(NULL, stderr) when the program exits. In Samba4 this is enabled by using the \-\-leak\-report command line option.
-.PP
-For it to be useful, this function must be called before any other talloc function as it establishes a "null context" that acts as the top of the tree. If you don't call this function first then passing NULL to talloc_report() or talloc_report_full() won't give you the full tree printout.
-.PP
-Here is a typical talloc report:
-.sp
-.RS 3n
-.nf
-talloc report on 'null_context' (total 267 bytes in 15 blocks)
-libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
-libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
-iconv(UTF8,CP850) contains 42 bytes in 2 blocks
-libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
-iconv(CP850,UTF8) contains 42 bytes in 2 blocks
-iconv(UTF8,UTF\-16LE) contains 45 bytes in 2 blocks
-iconv(UTF\-16LE,UTF8) contains 45 bytes in 2 blocks
-
-.fi
-.RE
-.SS "void talloc_enable_leak_report_full(void);"
-.PP
-This enables calling of talloc_report_full(NULL, stderr) when the program exits. In Samba4 this is enabled by using the \-\-leak\-report\-full command line option.
-.PP
-For it to be useful, this function must be called before any other talloc function as it establishes a "null context" that acts as the top of the tree. If you don't call this function first then passing NULL to talloc_report() or talloc_report_full() won't give you the full tree printout.
-.PP
-Here is a typical full report:
-.sp
-.RS 3n
-.nf
-full talloc report on 'root' (total 18 bytes in 8 blocks)
-p1 contains 18 bytes in 7 blocks (ref 0)
- r1 contains 13 bytes in 2 blocks (ref 0)
- reference to: p2
- p2 contains 1 bytes in 1 blocks (ref 1)
- x3 contains 1 bytes in 1 blocks (ref 0)
- x2 contains 1 bytes in 1 blocks (ref 0)
- x1 contains 1 bytes in 1 blocks (ref 0)
-
-.fi
-.RE
-.SS "(\fItype\fR *)talloc_zero(const void *\fIctx\fR, \fItype\fR);"
-.PP
-The talloc_zero() macro is equivalent to:
-.sp
-.RS 3n
-.nf
-ptr = talloc(ctx, type);
-if (ptr) memset(ptr, 0, sizeof(type));
-.fi
-.RE
-.SS "void *talloc_zero_size(const void *\fIctx\fR, size_t \fIsize\fR)"
-.PP
-The talloc_zero_size() function is useful when you don't have a known type.
-.SS "void *talloc_memdup(const void *\fIctx\fR, const void *\fIp\fR, size_t size);"
-.PP
-The talloc_memdup() function is equivalent to:
-.sp
-.RS 3n
-.nf
-ptr = talloc_size(ctx, size);
-if (ptr) memcpy(ptr, p, size);
-.fi
-.RE
-.SS "char *talloc_strdup(const void *\fIctx\fR, const char *\fIp\fR);"
-.PP
-The talloc_strdup() function is equivalent to:
-.sp
-.RS 3n
-.nf
-ptr = talloc_size(ctx, strlen(p)+1);
-if (ptr) memcpy(ptr, p, strlen(p)+1);
-.fi
-.RE
-.PP
-This function sets the name of the new pointer to the passed string. This is equivalent to:
-.sp
-.RS 3n
-.nf
-talloc_set_name_const(ptr, ptr)
-.fi
-.RE
-.SS "char *talloc_strndup(const void *\fIt\fR, const char *\fIp\fR, size_t \fIn\fR);"
-.PP
-The talloc_strndup() function is the talloc equivalent of the C library function strndup(3).
-.PP
-This function sets the name of the new pointer to the passed string. This is equivalent to:
-.sp
-.RS 3n
-.nf
-talloc_set_name_const(ptr, ptr)
-.fi
-.RE
-.SS "char *talloc_vasprintf(const void *\fIt\fR, const char *\fIfmt\fR, va_list \fIap\fR);"
-.PP
-The talloc_vasprintf() function is the talloc equivalent of the C library function vasprintf(3).
-.SS "char *talloc_asprintf(const void *\fIt\fR, const char *\fIfmt\fR, ...);"
-.PP
-The talloc_asprintf() function is the talloc equivalent of the C library function asprintf(3).
-.PP
-This function sets the name of the new pointer to the passed string. This is equivalent to:
-.sp
-.RS 3n
-.nf
-talloc_set_name_const(ptr, ptr)
-.fi
-.RE
-.SS "char *talloc_asprintf_append(char *s, const char *fmt, ...);"
-.PP
-The talloc_asprintf_append() function appends the given formatted string to the given string.
-.SS "(type *)talloc_array(const void *ctx, type, uint_t count);"
-.PP
-The talloc_array() macro is equivalent to:
-.sp
-.RS 3n
-.nf
-(type *)talloc_size(ctx, sizeof(type) * count);
-.fi
-.RE
-.PP
-except that it provides integer overflow protection for the multiply, returning NULL if the multiply overflows.
-.SS "void *talloc_array_size(const void *ctx, size_t size, uint_t count);"
-.PP
-The talloc_array_size() function is useful when the type is not known. It operates in the same way as talloc_array(), but takes a size instead of a type.
-.SS "(typeof(ptr)) talloc_array_ptrtype(const void *ctx, ptr, uint_t count);"
-.PP
-The talloc_ptrtype() macro should be used when you have a pointer to an array and want to allocate memory of an array to point at with this pointer. When compiling with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_array_size() and talloc_get_name() will return the current location in the source file. and not the type.
-.SS "void *talloc_realloc_fn(const void *ctx, void *ptr, size_t size)"
-.PP
-This is a non\-macro version of talloc_realloc(), which is useful as libraries sometimes want a realloc function pointer. A realloc(3) implementation encapsulates the functionality of malloc(3), free(3) and realloc(3) in one call, which is why it is useful to be able to pass around a single function pointer.
-.SS "void *talloc_autofree_context(void);"
-.PP
-This is a handy utility function that returns a talloc context which will be automatically freed on program exit. This can be used to reduce the noise in memory leak reports.
-.SS "void *talloc_check_name(const void *ptr, const char *name);"
-.PP
-This function checks if a pointer has the specified
-\fIname\fR. If it does then the pointer is returned. It it doesn't then NULL is returned.
-.SS "(type *)talloc_get_type(const void *ptr, type);"
-.PP
-This macro allows you to do type checking on talloc pointers. It is particularly useful for void* private pointers. It is equivalent to this:
-.sp
-.RS 3n
-.nf
-(type *)talloc_check_name(ptr, #type)
-.fi
-.RE
-.SS "talloc_set_type(const void *ptr, type);"
-.PP
-This macro allows you to force the name of a pointer to be a particular
-\fItype\fR. This can be used in conjunction with talloc_get_type() to do type checking on void* pointers.
-.PP
-It is equivalent to this:
-.sp
-.RS 3n
-.nf
-talloc_set_name_const(ptr, #type)
-.fi
-.RE
-.SH "PERFORMANCE"
-.PP
-All the additional features of talloc(3) over malloc(3) do come at a price. We have a simple performance test in Samba4 that measures talloc() versus malloc() performance, and it seems that talloc() is about 10% slower than malloc() on my x86 Debian Linux box. For Samba, the great reduction in code complexity that we get by using talloc makes this worthwhile, especially as the total overhead of talloc/malloc in Samba is already quite small.
-.SH "SEE ALSO"
-.PP
-malloc(3), strndup(3), vasprintf(3), asprintf(3),
-\fI\%http://talloc.samba.org/\fR
-.SH "COPYRIGHT/LICENSE"
-.PP
-Copyright (C) Andrew Tridgell 2004
-.PP
-This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+++ /dev/null
-<html><head><meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"><title>talloc</title><meta name="generator" content="DocBook XSL Stylesheets V1.71.0"></head><body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en"><a name="id2478730"></a><div class="titlepage"></div><div class="refnamediv"><h2>Name</h2><p>talloc — hierarchical reference counted memory pool system with destructors</p></div><div class="refsynopsisdiv"><h2>Synopsis</h2><pre class="synopsis">#include <talloc/talloc.h></pre></div><div class="refsect1" lang="en"><a name="id2517362"></a><h2>DESCRIPTION</h2><p>
- If you are used to talloc from Samba3 then please read this
- carefully, as talloc has changed a lot.
- </p><p>
- The new talloc is a hierarchical, reference counted memory pool
- system with destructors. Quite a mouthful really, but not too bad
- once you get used to it.
- </p><p>
- Perhaps the biggest change from Samba3 is that there is no
- distinction between a "talloc context" and a "talloc pointer". Any
- pointer returned from talloc() is itself a valid talloc context.
- This means you can do this:
- </p><pre class="programlisting">
- struct foo *X = talloc(mem_ctx, struct foo);
- X->name = talloc_strdup(X, "foo");
- </pre><p>
- and the pointer <code class="literal">X->name</code>
- would be a "child" of the talloc context <code class="literal">X</code> which is itself a child of
- <code class="literal">mem_ctx</code>. So if you do
- <code class="literal">talloc_free(mem_ctx)</code> then
- it is all destroyed, whereas if you do <code class="literal">talloc_free(X)</code> then just <code class="literal">X</code> and <code class="literal">X->name</code> are destroyed, and if
- you do <code class="literal">talloc_free(X->name)</code> then just
- the name element of <code class="literal">X</code> is
- destroyed.
- </p><p>
- If you think about this, then what this effectively gives you is an
- n-ary tree, where you can free any part of the tree with
- talloc_free().
- </p><p>
- If you find this confusing, then I suggest you run the <code class="literal">testsuite</code> program to watch talloc
- in action. You may also like to add your own tests to <code class="literal">testsuite.c</code> to clarify how some
- particular situation is handled.
- </p></div><div class="refsect1" lang="en"><a name="id2478829"></a><h2>TALLOC API</h2><p>
- The following is a complete guide to the talloc API. Read it all at
- least twice.
- </p><div class="refsect2" lang="en"><a name="id2478838"></a><h3>(type *)talloc(const void *ctx, type);</h3><p>
- The talloc() macro is the core of the talloc library. It takes a
- memory <span class="italic">ctx</span> and a <span class="italic">type</span>, and returns a pointer to a new
- area of memory of the given <span class="italic">type</span>.
- </p><p>
- The returned pointer is itself a talloc context, so you can use
- it as the <span class="italic">ctx</span> argument to more
- calls to talloc() if you wish.
- </p><p>
- The returned pointer is a "child" of the supplied context. This
- means that if you talloc_free() the <span class="italic">ctx</span> then the new child disappears as
- well. Alternatively you can free just the child.
- </p><p>
- The <span class="italic">ctx</span> argument to talloc()
- can be NULL, in which case a new top level context is created.
- </p></div><div class="refsect2" lang="en"><a name="id2478902"></a><h3>void *talloc_size(const void *ctx, size_t size);</h3><p>
- The function talloc_size() should be used when you don't have a
- convenient type to pass to talloc(). Unlike talloc(), it is not
- type safe (as it returns a void *), so you are on your own for
- type checking.
- </p></div><div class="refsect2" lang="en"><a name="id2478915"></a><h3>(typeof(ptr)) talloc_ptrtype(const void *ctx, ptr);</h3><p>
- The talloc_ptrtype() macro should be used when you have a pointer and
- want to allocate memory to point at with this pointer. When compiling
- with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_size()
- and talloc_get_name() will return the current location in the source file.
- and not the type.
- </p></div><div class="refsect2" lang="en"><a name="id2478930"></a><h3>int talloc_free(void *ptr);</h3><p>
- The talloc_free() function frees a piece of talloc memory, and
- all its children. You can call talloc_free() on any pointer
- returned by talloc().
- </p><p>
- The return value of talloc_free() indicates success or failure,
- with 0 returned for success and -1 for failure. The only
- possible failure condition is if <span class="italic">ptr</span> had a destructor attached to it and
- the destructor returned -1. See <a href="#talloc_set_destructor" title="void talloc_set_destructor(const void *ptr, int (*destructor)(void *));">“<span class="quote">talloc_set_destructor()</span>”</a>
- for details on destructors.
- </p><p>
- If this pointer has an additional parent when talloc_free() is
- called then the memory is not actually released, but instead the
- most recently established parent is destroyed. See <a href="#talloc_reference" title="void *talloc_reference(const void *ctx, const void *ptr);">“<span class="quote">talloc_reference()</span>”</a>
- for details on establishing additional parents.
- </p><p>
- For more control on which parent is removed, see <a href="#talloc_unlink" title="int talloc_unlink(const void *ctx, const void *ptr);">“<span class="quote">talloc_unlink()</span>”</a>.
- </p><p>
- talloc_free() operates recursively on its children.
- </p></div><div class="refsect2" lang="en"><a name="talloc_reference"></a><h3>void *talloc_reference(const void *ctx, const void *ptr);</h3><p>
- The talloc_reference() function makes <span class="italic">ctx</span> an additional parent of <span class="italic">ptr</span>.
- </p><p>
- The return value of talloc_reference() is always the original
- pointer <span class="italic">ptr</span>, unless talloc ran
- out of memory in creating the reference in which case it will
- return NULL (each additional reference consumes around 48 bytes
- of memory on intel x86 platforms).
- </p><p>
- If <span class="italic">ptr</span> is NULL, then the
- function is a no-op, and simply returns NULL.
- </p><p>
- After creating a reference you can free it in one of the
- following ways:
- </p><p>
- </p><div class="itemizedlist"><ul type="disc"><li><p>
- you can talloc_free() any parent of the original pointer.
- That will reduce the number of parents of this pointer by 1,
- and will cause this pointer to be freed if it runs out of
- parents.
- </p></li><li><p>
- you can talloc_free() the pointer itself. That will destroy
- the most recently established parent to the pointer and leave
- the pointer as a child of its current parent.
- </p></li></ul></div><p>
- </p><p>
- For more control on which parent to remove, see <a href="#talloc_unlink" title="int talloc_unlink(const void *ctx, const void *ptr);">“<span class="quote">talloc_unlink()</span>”</a>.
- </p></div><div class="refsect2" lang="en"><a name="talloc_unlink"></a><h3>int talloc_unlink(const void *ctx, const void *ptr);</h3><p>
- The talloc_unlink() function removes a specific parent from
- <span class="italic">ptr</span>. The <span class="italic">ctx</span> passed must either be a context used
- in talloc_reference() with this pointer, or must be a direct
- parent of ptr.
- </p><p>
- Note that if the parent has already been removed using
- talloc_free() then this function will fail and will return -1.
- Likewise, if <span class="italic">ptr</span> is NULL, then
- the function will make no modifications and return -1.
- </p><p>
- Usually you can just use talloc_free() instead of
- talloc_unlink(), but sometimes it is useful to have the
- additional control on which parent is removed.
- </p></div><div class="refsect2" lang="en"><a name="talloc_set_destructor"></a><h3>void talloc_set_destructor(const void *ptr, int (*destructor)(void *));</h3><p>
- The function talloc_set_destructor() sets the <span class="italic">destructor</span> for the pointer <span class="italic">ptr</span>. A <span class="italic">destructor</span> is a function that is called
- when the memory used by a pointer is about to be released. The
- destructor receives <span class="italic">ptr</span> as an
- argument, and should return 0 for success and -1 for failure.
- </p><p>
- The <span class="italic">destructor</span> can do anything
- it wants to, including freeing other pieces of memory. A common
- use for destructors is to clean up operating system resources
- (such as open file descriptors) contained in the structure the
- destructor is placed on.
- </p><p>
- You can only place one destructor on a pointer. If you need more
- than one destructor then you can create a zero-length child of
- the pointer and place an additional destructor on that.
- </p><p>
- To remove a destructor call talloc_set_destructor() with NULL for
- the destructor.
- </p><p>
- If your destructor attempts to talloc_free() the pointer that it
- is the destructor for then talloc_free() will return -1 and the
- free will be ignored. This would be a pointless operation
- anyway, as the destructor is only called when the memory is just
- about to go away.
- </p></div><div class="refsect2" lang="en"><a name="id2479748"></a><h3>int talloc_increase_ref_count(const void *<span class="italic">ptr</span>);</h3><p>
- The talloc_increase_ref_count(<span class="italic">ptr</span>) function is exactly equivalent to:
- </p><pre class="programlisting">talloc_reference(NULL, ptr);</pre><p>
- You can use either syntax, depending on which you think is
- clearer in your code.
- </p><p>
- It returns 0 on success and -1 on failure.
- </p></div><div class="refsect2" lang="en"><a name="id2479785"></a><h3>size_t talloc_reference_count(const void *<span class="italic">ptr</span>);</h3><p>
- Return the number of references to the pointer.
- </p></div><div class="refsect2" lang="en"><a name="talloc_set_name"></a><h3>void talloc_set_name(const void *ptr, const char *fmt, ...);</h3><p>
- Each talloc pointer has a "name". The name is used principally
- for debugging purposes, although it is also possible to set and
- get the name on a pointer in as a way of "marking" pointers in
- your code.
- </p><p>
- The main use for names on pointer is for "talloc reports". See
- <a href="#talloc_report" title="void talloc_report(const void *ptr, FILE *f);">“<span class="quote">talloc_report_depth_cb()</span>”</a>,
- <a href="#talloc_report" title="void talloc_report(const void *ptr, FILE *f);">“<span class="quote">talloc_report_depth_file()</span>”</a>,
- <a href="#talloc_report" title="void talloc_report(const void *ptr, FILE *f);">“<span class="quote">talloc_report()</span>”</a>
- <a href="#talloc_report" title="void talloc_report(const void *ptr, FILE *f);">“<span class="quote">talloc_report()</span>”</a>
- and <a href="#talloc_report_full" title="void talloc_report_full(const void *ptr, FILE *f);">“<span class="quote">talloc_report_full()</span>”</a>
- for details. Also see <a href="#talloc_enable_leak_report" title="void talloc_enable_leak_report(void);">“<span class="quote">talloc_enable_leak_report()</span>”</a>
- and <a href="#talloc_enable_leak_report_full" title="void talloc_enable_leak_report_full(void);">“<span class="quote">talloc_enable_leak_report_full()</span>”</a>.
- </p><p>
- The talloc_set_name() function allocates memory as a child of the
- pointer. It is logically equivalent to:
- </p><pre class="programlisting">talloc_set_name_const(ptr, talloc_asprintf(ptr, fmt, ...));</pre><p>
- Note that multiple calls to talloc_set_name() will allocate more
- memory without releasing the name. All of the memory is released
- when the ptr is freed using talloc_free().
- </p></div><div class="refsect2" lang="en"><a name="id2479904"></a><h3>void talloc_set_name_const(const void *<span class="italic">ptr</span>, const char *<span class="italic">name</span>);</h3><p>
- The function talloc_set_name_const() is just like
- talloc_set_name(), but it takes a string constant, and is much
- faster. It is extensively used by the "auto naming" macros, such
- as talloc_p().
- </p><p>
- This function does not allocate any memory. It just copies the
- supplied pointer into the internal representation of the talloc
- ptr. This means you must not pass a <span class="italic">name</span> pointer to memory that will
- disappear before <span class="italic">ptr</span> is freed
- with talloc_free().
- </p></div><div class="refsect2" lang="en"><a name="id2479948"></a><h3>void *talloc_named(const void *<span class="italic">ctx</span>, size_t <span class="italic">size</span>, const char *<span class="italic">fmt</span>, ...);</h3><p>
- The talloc_named() function creates a named talloc pointer. It
- is equivalent to:
- </p><pre class="programlisting">ptr = talloc_size(ctx, size);
-talloc_set_name(ptr, fmt, ....);</pre></div><div class="refsect2" lang="en"><a name="id2479983"></a><h3>void *talloc_named_const(const void *<span class="italic">ctx</span>, size_t <span class="italic">size</span>, const char *<span class="italic">name</span>);</h3><p>
- This is equivalent to:
- </p><pre class="programlisting">ptr = talloc_size(ctx, size);
-talloc_set_name_const(ptr, name);</pre></div><div class="refsect2" lang="en"><a name="id2480018"></a><h3>const char *talloc_get_name(const void *<span class="italic">ptr</span>);</h3><p>
- This returns the current name for the given talloc pointer,
- <span class="italic">ptr</span>. See <a href="#talloc_set_name" title="void talloc_set_name(const void *ptr, const char *fmt, ...);">“<span class="quote">talloc_set_name()</span>”</a>
- for details.
- </p></div><div class="refsect2" lang="en"><a name="id2480049"></a><h3>void *talloc_init(const char *<span class="italic">fmt</span>, ...);</h3><p>
- This function creates a zero length named talloc context as a top
- level context. It is equivalent to:
- </p><pre class="programlisting">talloc_named(NULL, 0, fmt, ...);</pre></div><div class="refsect2" lang="en"><a name="id2480072"></a><h3>void *talloc_new(void *<span class="italic">ctx</span>);</h3><p>
- This is a utility macro that creates a new memory context hanging
- off an exiting context, automatically naming it "talloc_new:
- __location__" where __location__ is the source line it is called
- from. It is particularly useful for creating a new temporary
- working context.
- </p></div><div class="refsect2" lang="en"><a name="id2526763"></a><h3>(<span class="italic">type</span> *)talloc_realloc(const void *<span class="italic">ctx</span>, void *<span class="italic">ptr</span>, <span class="italic">type</span>, <span class="italic">count</span>);</h3><p>
- The talloc_realloc() macro changes the size of a talloc pointer.
- It has the following equivalences:
- </p><pre class="programlisting">talloc_realloc(ctx, NULL, type, 1) ==> talloc(ctx, type);
-talloc_realloc(ctx, ptr, type, 0) ==> talloc_free(ptr);</pre><p>
- The <span class="italic">ctx</span> argument is only used
- if <span class="italic">ptr</span> is not NULL, otherwise
- it is ignored.
- </p><p>
- talloc_realloc() returns the new pointer, or NULL on failure.
- The call will fail either due to a lack of memory, or because the
- pointer has more than one parent (see <a href="#talloc_reference" title="void *talloc_reference(const void *ctx, const void *ptr);">“<span class="quote">talloc_reference()</span>”</a>).
- </p></div><div class="refsect2" lang="en"><a name="id2526841"></a><h3>void *talloc_realloc_size(const void *ctx, void *ptr, size_t size);</h3><p>
- the talloc_realloc_size() function is useful when the type is not
- known so the type-safe talloc_realloc() cannot be used.
- </p></div><div class="refsect2" lang="en"><a name="id2526853"></a><h3>TYPE *talloc_steal(const void *<span class="italic">new_ctx</span>, const TYPE *<span class="italic">ptr</span>);</h3><p>
- The talloc_steal() function changes the parent context of a
- talloc pointer. It is typically used when the context that the
- pointer is currently a child of is going to be freed and you wish
- to keep the memory for a longer time.
- </p><p>
- The talloc_steal() function returns the pointer that you pass it.
- It does not have any failure modes.
- </p><p>
- NOTE: It is possible to produce loops in the parent/child
- relationship if you are not careful with talloc_steal(). No
- guarantees are provided as to your sanity or the safety of your
- data if you do this.
- </p></div><div class="refsect2" lang="en"><a name="id2526890"></a><h3>TYPE *talloc_move(const void *<span class="italic">new_ctx</span>, TYPE **<span class="italic">ptr</span>);</h3><p>
- The talloc_move() function is a wrapper around
- talloc_steal() which zeros the source pointer after the
- move. This avoids a potential source of bugs where a
- programmer leaves a pointer in two structures, and uses the
- pointer from the old structure after it has been moved to a
- new one.
- </p></div><div class="refsect2" lang="en"><a name="id2526916"></a><h3>size_t talloc_total_size(const void *<span class="italic">ptr</span>);</h3><p>
- The talloc_total_size() function returns the total size in bytes
- used by this pointer and all child pointers. Mostly useful for
- debugging.
- </p><p>
- Passing NULL is allowed, but it will only give a meaningful
- result if talloc_enable_leak_report() or
- talloc_enable_leak_report_full() has been called.
- </p></div><div class="refsect2" lang="en"><a name="id2526940"></a><h3>size_t talloc_total_blocks(const void *<span class="italic">ptr</span>);</h3><p>
- The talloc_total_blocks() function returns the total memory block
- count used by this pointer and all child pointers. Mostly useful
- for debugging.
- </p><p>
- Passing NULL is allowed, but it will only give a meaningful
- result if talloc_enable_leak_report() or
- talloc_enable_leak_report_full() has been called.
- </p></div><div class="refsect2" lang="en"><a name="talloc_report"></a><h3>void talloc_report(const void *ptr, FILE *f);</h3><p>
- The talloc_report() function prints a summary report of all
- memory used by <span class="italic">ptr</span>. One line
- of report is printed for each immediate child of ptr, showing the
- total memory and number of blocks used by that child.
- </p><p>
- You can pass NULL for the pointer, in which case a report is
- printed for the top level memory context, but only if
- talloc_enable_leak_report() or talloc_enable_leak_report_full()
- has been called.
- </p></div><div class="refsect2" lang="en"><a name="talloc_report_full"></a><h3>void talloc_report_full(const void *<span class="italic">ptr</span>, FILE *<span class="italic">f</span>);</h3><p>
- This provides a more detailed report than talloc_report(). It
- will recursively print the entire tree of memory referenced by
- the pointer. References in the tree are shown by giving the name
- of the pointer that is referenced.
- </p><p>
- You can pass NULL for the pointer, in which case a report is
- printed for the top level memory context, but only if
- talloc_enable_leak_report() or talloc_enable_leak_report_full()
- has been called.
- </p></div><div class="refsect2" lang="en"><a name="talloc_report_depth_cb"></a><div class="funcsynopsis"><table border="0" summary="Function synopsis" cellspacing="0" cellpadding="0" style="padding-bottom: 1em"><tr><td><code class="funcdef">void <b class="fsfunc">talloc_report_depth_cb</b>(</code></td><td><var class="pdparam">const void *ptr</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">int depth</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">int max_depth</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">void (*callback)(const void *ptr, int depth, int max_depth, int is_ref, void *priv)</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">void *priv</var><code>)</code>;</td><td> </td></tr></table><table border="0" summary="Function argument synopsis" cellspacing="0" cellpadding="0"><tr><td><code></code> </td><td><code><var class="pdparam">const void *ptr</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">int depth</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">int max_depth</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">void (*callback)(const void *ptr, int depth, int max_depth, int is_ref, void *priv)</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">void *priv</var>;</code></td></tr></table></div><p>
- This provides a more flexible reports than talloc_report(). It
- will recursively call the callback for the entire tree of memory
- referenced by the pointer. References in the tree are passed with
- <span class="italic">is_ref = 1</span> and the pointer that is referenced.
- </p><p>
- You can pass NULL for the pointer, in which case a report is
- printed for the top level memory context, but only if
- talloc_enable_leak_report() or talloc_enable_leak_report_full()
- has been called.
- </p><p>
- The recursion is stopped when depth >= max_depth.
- max_depth = -1 means only stop at leaf nodes.
- </p></div><div class="refsect2" lang="en"><a name="talloc_report_depth_file"></a><div class="funcsynopsis"><table border="0" summary="Function synopsis" cellspacing="0" cellpadding="0" style="padding-bottom: 1em"><tr><td><code class="funcdef">void <b class="fsfunc">talloc_report_depth_file</b>(</code></td><td><var class="pdparam">const void *ptr</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">int depth</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">int max_depth</var>, </td><td> </td></tr><tr><td> </td><td><var class="pdparam">FILE *f</var><code>)</code>;</td><td> </td></tr></table><table border="0" summary="Function argument synopsis" cellspacing="0" cellpadding="0"><tr><td><code></code> </td><td><code><var class="pdparam">const void *ptr</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">int depth</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">int max_depth</var>;</code></td></tr><tr><td><code></code> </td><td><code><var class="pdparam">FILE *f</var>;</code></td></tr></table></div><p>
- This provides a more flexible reports than talloc_report(). It
- will let you specify the depth and max_depth.
- </p></div><div class="refsect2" lang="en"><a name="talloc_enable_leak_report"></a><h3>void talloc_enable_leak_report(void);</h3><p>
- This enables calling of talloc_report(NULL, stderr) when the
- program exits. In Samba4 this is enabled by using the
- --leak-report command line option.
- </p><p>
- For it to be useful, this function must be called before any
- other talloc function as it establishes a "null context" that
- acts as the top of the tree. If you don't call this function
- first then passing NULL to talloc_report() or
- talloc_report_full() won't give you the full tree printout.
- </p><p>
- Here is a typical talloc report:
- </p><pre class="screen">talloc report on 'null_context' (total 267 bytes in 15 blocks)
-libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
-libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
-iconv(UTF8,CP850) contains 42 bytes in 2 blocks
-libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
-iconv(CP850,UTF8) contains 42 bytes in 2 blocks
-iconv(UTF8,UTF-16LE) contains 45 bytes in 2 blocks
-iconv(UTF-16LE,UTF8) contains 45 bytes in 2 blocks
- </pre></div><div class="refsect2" lang="en"><a name="talloc_enable_leak_report_full"></a><h3>void talloc_enable_leak_report_full(void);</h3><p>
- This enables calling of talloc_report_full(NULL, stderr) when the
- program exits. In Samba4 this is enabled by using the
- --leak-report-full command line option.
- </p><p>
- For it to be useful, this function must be called before any
- other talloc function as it establishes a "null context" that
- acts as the top of the tree. If you don't call this function
- first then passing NULL to talloc_report() or
- talloc_report_full() won't give you the full tree printout.
- </p><p>
- Here is a typical full report:
- </p><pre class="screen">full talloc report on 'root' (total 18 bytes in 8 blocks)
-p1 contains 18 bytes in 7 blocks (ref 0)
- r1 contains 13 bytes in 2 blocks (ref 0)
- reference to: p2
- p2 contains 1 bytes in 1 blocks (ref 1)
- x3 contains 1 bytes in 1 blocks (ref 0)
- x2 contains 1 bytes in 1 blocks (ref 0)
- x1 contains 1 bytes in 1 blocks (ref 0)
- </pre></div><div class="refsect2" lang="en"><a name="id2527248"></a><h3>(<span class="italic">type</span> *)talloc_zero(const void *<span class="italic">ctx</span>, <span class="italic">type</span>);</h3><p>
- The talloc_zero() macro is equivalent to:
- </p><pre class="programlisting">ptr = talloc(ctx, type);
-if (ptr) memset(ptr, 0, sizeof(type));</pre></div><div class="refsect2" lang="en"><a name="id2527281"></a><h3>void *talloc_zero_size(const void *<span class="italic">ctx</span>, size_t <span class="italic">size</span>)</h3><p>
- The talloc_zero_size() function is useful when you don't have a
- known type.
- </p></div><div class="refsect2" lang="en"><a name="id2527304"></a><h3>void *talloc_memdup(const void *<span class="italic">ctx</span>, const void *<span class="italic">p</span>, size_t size);</h3><p>
- The talloc_memdup() function is equivalent to:
- </p><pre class="programlisting">ptr = talloc_size(ctx, size);
-if (ptr) memcpy(ptr, p, size);</pre></div><div class="refsect2" lang="en"><a name="id2527332"></a><h3>char *talloc_strdup(const void *<span class="italic">ctx</span>, const char *<span class="italic">p</span>);</h3><p>
- The talloc_strdup() function is equivalent to:
- </p><pre class="programlisting">ptr = talloc_size(ctx, strlen(p)+1);
-if (ptr) memcpy(ptr, p, strlen(p)+1);</pre><p>
- This function sets the name of the new pointer to the passed
- string. This is equivalent to:
- </p><pre class="programlisting">talloc_set_name_const(ptr, ptr)</pre></div><div class="refsect2" lang="en"><a name="id2527372"></a><h3>char *talloc_strndup(const void *<span class="italic">t</span>, const char *<span class="italic">p</span>, size_t <span class="italic">n</span>);</h3><p>
- The talloc_strndup() function is the talloc equivalent of the C
- library function strndup(3).
- </p><p>
- This function sets the name of the new pointer to the passed
- string. This is equivalent to:
- </p><pre class="programlisting">talloc_set_name_const(ptr, ptr)</pre></div><div class="refsect2" lang="en"><a name="id2527412"></a><h3>char *talloc_vasprintf(const void *<span class="italic">t</span>, const char *<span class="italic">fmt</span>, va_list <span class="italic">ap</span>);</h3><p>
- The talloc_vasprintf() function is the talloc equivalent of the C
- library function vasprintf(3).
- </p></div><div class="refsect2" lang="en"><a name="id2527441"></a><h3>char *talloc_asprintf(const void *<span class="italic">t</span>, const char *<span class="italic">fmt</span>, ...);</h3><p>
- The talloc_asprintf() function is the talloc equivalent of the C
- library function asprintf(3).
- </p><p>
- This function sets the name of the new pointer to the passed
- string. This is equivalent to:
- </p><pre class="programlisting">talloc_set_name_const(ptr, ptr)</pre></div><div class="refsect2" lang="en"><a name="id2527475"></a><h3>char *talloc_asprintf_append(char *s, const char *fmt, ...);</h3><p>
- The talloc_asprintf_append() function appends the given formatted
- string to the given string.
- </p></div><div class="refsect2" lang="en"><a name="id2527486"></a><h3>(type *)talloc_array(const void *ctx, type, uint_t count);</h3><p>
- The talloc_array() macro is equivalent to:
- </p><pre class="programlisting">(type *)talloc_size(ctx, sizeof(type) * count);</pre><p>
- except that it provides integer overflow protection for the
- multiply, returning NULL if the multiply overflows.
- </p></div><div class="refsect2" lang="en"><a name="id2527509"></a><h3>void *talloc_array_size(const void *ctx, size_t size, uint_t count);</h3><p>
- The talloc_array_size() function is useful when the type is not
- known. It operates in the same way as talloc_array(), but takes a
- size instead of a type.
- </p></div><div class="refsect2" lang="en"><a name="id2527522"></a><h3>(typeof(ptr)) talloc_array_ptrtype(const void *ctx, ptr, uint_t count);</h3><p>
- The talloc_ptrtype() macro should be used when you have a pointer to an array
- and want to allocate memory of an array to point at with this pointer. When compiling
- with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_array_size()
- and talloc_get_name() will return the current location in the source file.
- and not the type.
- </p></div><div class="refsect2" lang="en"><a name="id2527538"></a><h3>void *talloc_realloc_fn(const void *ctx, void *ptr, size_t size)</h3><p>
- This is a non-macro version of talloc_realloc(), which is useful
- as libraries sometimes want a realloc function pointer. A
- realloc(3) implementation encapsulates the functionality of
- malloc(3), free(3) and realloc(3) in one call, which is why it is
- useful to be able to pass around a single function pointer.
- </p></div><div class="refsect2" lang="en"><a name="id2527554"></a><h3>void *talloc_autofree_context(void);</h3><p>
- This is a handy utility function that returns a talloc context
- which will be automatically freed on program exit. This can be
- used to reduce the noise in memory leak reports.
- </p></div><div class="refsect2" lang="en"><a name="id2527566"></a><h3>void *talloc_check_name(const void *ptr, const char *name);</h3><p>
- This function checks if a pointer has the specified <span class="italic">name</span>. If it does then the pointer is
- returned. It it doesn't then NULL is returned.
- </p></div><div class="refsect2" lang="en"><a name="id2527584"></a><h3>(type *)talloc_get_type(const void *ptr, type);</h3><p>
- This macro allows you to do type checking on talloc pointers. It
- is particularly useful for void* private pointers. It is
- equivalent to this:
- </p><pre class="programlisting">(type *)talloc_check_name(ptr, #type)</pre></div><div class="refsect2" lang="en"><a name="id2527603"></a><h3>talloc_set_type(const void *ptr, type);</h3><p>
- This macro allows you to force the name of a pointer to be a
- particular <span class="emphasis"><em>type</em></span>. This can be
- used in conjunction with talloc_get_type() to do type checking on
- void* pointers.
- </p><p>
- It is equivalent to this:
- </p><pre class="programlisting">talloc_set_name_const(ptr, #type)</pre></div></div><div class="refsect1" lang="en"><a name="id2527631"></a><h2>PERFORMANCE</h2><p>
- All the additional features of talloc(3) over malloc(3) do come at a
- price. We have a simple performance test in Samba4 that measures
- talloc() versus malloc() performance, and it seems that talloc() is
- about 10% slower than malloc() on my x86 Debian Linux box. For
- Samba, the great reduction in code complexity that we get by using
- talloc makes this worthwhile, especially as the total overhead of
- talloc/malloc in Samba is already quite small.
- </p></div><div class="refsect1" lang="en"><a name="id2527648"></a><h2>SEE ALSO</h2><p>
- malloc(3), strndup(3), vasprintf(3), asprintf(3),
- <a href="http://talloc.samba.org/" target="_top">http://talloc.samba.org/</a>
- </p></div><div class="refsect1" lang="en"><a name="id2527662"></a><h2>COPYRIGHT/LICENSE</h2><p>
- Copyright (C) Andrew Tridgell 2004
- </p><p>
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or (at
- your option) any later version.
- </p><p>
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- </p><p>
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- </p></div></div></body></html>
+++ /dev/null
-prefix=/home/tridge/samba/samba4/prefix
-exec_prefix=/home/tridge/samba/samba4/prefix
-libdir=${exec_prefix}/lib
-includedir=${prefix}/include
-
-Name: talloc
-Description: A hierarchical pool based memory system with destructors
-Requires.private:
-Version: 0.0.1
-Libs: -L${libdir} -ltalloc
-Libs.private: -lreplace
-Cflags: -I${includedir} -DHAVE_IMMEDIATE_STRUCTURES=1
git.samba.org / obnox / ctdb.git / commitdiff