Update manuf, services enterprise-numbers, translations, and other items.
Change-Id: Id342a0bfe0bea352813c19adae67fb41806eb7d3
Reviewed-on: https://code.wireshark.org/review/12284
Reviewed-by: Gerald Combs <gerald@wireshark.org>
PRIVATE ENTERPRISE NUMBERS
-(last updated 2015-11-13)
+(last updated 2015-11-27)
SMI Network Management Private Enterprise Codes:
Per Hagero
pehae&wmdata.com
3640
- Industrial Logic Corporation
- Ladd Asper
- laddasper&earthlink.net
+ DataPath, Inc.
+ Adam Kirkley
+ adam.kirkley&datapath.com
3641
Netaphor Software, Inc.
Rakesh Mahajan
Steven Sherry
ssherry&astralpoint.com
4063
- ASC Telecom AG
- Franz Hock
- f.hock&asc.de
+ ASC Technologies AG (formerly 'ASC Telecom AG')
+ Peter Schmitt
+ p.schmitt&asc.de
4064
Elma Oy Electronic Trading
Mikko Ahonen
Mamamdou M'Baye
mamadou&blacksound.com
4917
- Sistemas Tecnicos de Loterias
- Julio Sanchez Fernandez
- oidregistry&stl.es
+ Sociedad Estatal de Loterias y Apuestas de Estado
+ Julio Sánchez Fernández
+ oidregistry&selae.es
4918
Taurusent Technologies
Linford D. Hayes
9445
TJB
Timothy Butler
- timothybutler&charter.net
+ rotordyn&yahoo.com
9446
Indiana University
Mark S. Bruhn
10967
Surftool Systems
Robert Tykulsker
- surftool&pacbell.net
+ surftool&comcast.net
10968
Systematic Software Engineering A/S
Bo Kirkegaard
joerg&preuss.info
11833
nCircle Network Security
- Timothy D. Keanini
- tk&ncircle.com
+ Karl D. Melcher
+ kmelcher&tripwire.com
11834
PLIVA d.d
Dobrica Pavlinusic
andrewho&animezone.org
15503
University of Berne
- Peter M. Geiser
- hostmaster&unibe.ch
+ Peter M. Studer
+ aai&id.unibe.ch
15504
Ministère de l'équipement, des transports, du logement, du tourisme et de la mer
Christian Paquet
Aaron Xu
aaron_xu&sunsystems.com
17987
- Cable & Wireless UK
+ Vodafone Group Services Limited (formerly 'Cable & Wireless UK')
Ian Kirk
- ian.kirk&cw.com
+ ian.kirk&vodafone.com
17988
PYLON R.I.S.C. GmbH
Siegmund Gorr
Lajos KISS
kl216&hszk.bme.hu
20127
- Gutenpress
+ TTYS0 (formerly 'Gutenpress')
Sean Johnson
- sean&gutenpress.org
+ sean&ttys0.net
20128
SKH TKO Kei Tak Primary School
William Ng
hostmaster+iana&rmf.pl
21939
HYTEC GmbH
- Prof. Dr.-Ing. Dr.-Ing. E.h. Norbert J. Fliege
+ Janis Kruse
info&hytec.de
21940
Enatel Ltd
alauridsen&opportunity.dk
26307
Skyguide - swiss air navigation services ltd.
- Marco Nanni
- marco.nanni&skyguide.ch
+ Patrick Flach
+ patrick.flach&skyguide.ch
26308
Saab TransponderTech AB
Henrik Toorvald
29121
NZN
Emanuelis Norbutas
- emanuelis&nzn.lt
+ em&nuel.is
29122
TCX Computer Technology
Hal Finney
29454
O.D.S., Inc.
Allen Brewer, Ph.D.
- odsinc&rcn.com
+ abrewer&odsinc.us
29455
CRAHAY.EU
Gaetan Crahay
33952
ZimZahm Productions
Thomas P. Zahm
- zahmt&ipfw.edu
+ tpzahm&gmail.com
33953
DLT Limited
Darren Lucinsky
Bent Dahl
support&bdconsult.eu
35088
- Platinum Solutions, Inc.
- Paul T Sparks
- paul.sparks&platinumsolutions.com
+ SRA International, Inc
+ Kay Patterson
+ Kay_Patterson&sra.com
35089
Bluebird Electronics Ltd
Nigel Gardner
Saulius Lukse
saulius.lukse&gmail.com
39030
- wlan-partner.com AG
+ CloudGuard Software AG (formerly 'wlan-partner.com AG')
Michael Schneider
- iana&wlan-partner.com
+ iana&cloudguard.ch
39031
Eastern Mennonite University
Jason Alderfer
DOM-P Zrt
Miklos Fazek
hostmaster&domp.hu
+46734
+ TCCC
+ Mary Lou Gladieux
+ mgladieux&toledoclinic.com
+46735
+ Silhouette International Schmied AG
+ Johann Mairinger
+ j.mairinger&silhouette.com
+46736
+ Powertech IT Services S.R.L.
+ Marian Patruca
+ mpatruca&gmail.com
+46737
+ Amphinicy Technologies
+ Marko Mrvelj
+ marko.mrvelj&hinicy.com
+46738
+ Beeler IT Services
+ Adrian Beeler
+ info&beeler-it-services.ch
+46739
+ RONIT. N.THAKOR
+ RONIT. N.THAKOR
+ ronitnthakor&gmail.com
+46740
+ Zendesk, Inc
+ Aaron Peschel
+ opsteam&zendesk.com
+46741
+ Aspect Enterprise Solutions Inc.
+ Liviu Faciu
+ lfaciu&aspectenterprise.com
+46742
+ Global Biodiversity Information Facility (GBIF)
+ Tim Robertson
+ trobertson&gbif.org
+46743
+ Technology Architects LLC
+ John Flanigan
+ JFlanigan&TechnologyArchitects.com
+46744
+ Transaction Technologies Pte Ltd
+ Thorsten Neumann
+ thorsten.neumann&smartpesa.com
+46745
+ Joe Thielen
+ Joe Thielen
+ joe&joethielen.com
+46746
+ Weill Cornell Medicine
+ Lucas Rockwell
+ lur2015&med.cornell.edu
+46747
+ The Christ Hospital Hem Onc
+ Regina Lampe RN BSN OCN
+ regina.lampe&thechristhospital.com
+46748
+ Alliance Technology Group, LLC
+ Eric L. Kibisingo
+ eric.kibisingo&alliance-it.com
+46749
+ 121 Marketing Services Group, Inc.
+ David Carter
+ hostmaster&121msg.com
+46750
+ MobilSign Ltd.
+ Peter Dohanyos
+ info&mobilsign.hu
+46751
+ Carrizo Oil & Gas, Inc.
+ David Hepler
+ hostmaster&carrizo.com
+46752
+ THE MINNITI CENTER FOR MEDICAL ONCOLOGY & HEMATOLOGY
+ LINDA BURKE
+ minniticenterlinda&comcast.net
+46753
+ Hematology Oncology Clinic, LLP
+ Steven Winkler
+ stevenwinkler3&aol.com
+46754
+ NETFOX AG
+ Mirko Ludeke
+ mludeke&netfox.de
+46755
+ Nexgen Oncology
+ Sujan Paudel
+ spaudel&mycancercenter.com
+46756
+ Michael Oberdorf IT-Consulting
+ Michael Oberdorf
+ info&oberdorf-itc.de
+46757
+ DeMoulas Market Basket, Inc.
+ Neil Buckley
+ security&demoulasmarketbasket.com
+46758
+ CarMax
+ David Harold
+ david_harold&carmax.com
+46759
+ CoverMyMeds
+ CoverMyMeds
+ admins&covermymeds.com
+46760
+ Teksush.com
+ Shubhra Prakash Nandi
+ email2shubhra&gmail.com
+46761
+ Groupe JVS
+ childeric busche
+ childeric.busche&jvs.fr
+46762
+ Atos IT Solutions and Services GmbH
+ Björn Pohl
+ bjoern.pohl&atos.net
+46763
+ alfer aluminium Gesellschaft mbH
+ Christine Breitmoser
+ christine.breitmoser&alfer.com
+46764
+ HealthInsight
+ Information Services
+ hisrlis&healthinsight.org
+46765
+ Sviaz-Bank
+ Nikolay Kurepkin
+ nkurepkin&sviaz-bank.ru
+46766
+ Creatcomm Technology
+ jie zhao
+ suijtwl&gmail.com
+46767
+ CarMax, Inc
+ Shiva Thatipelli
+ shiva_thatipelli&carmax.com
+46768
+ Symphony Communication Services LLC
+ Andrew Wnuk
+ andrew.wnuk&symphony.com
+46769
+ St. Leonard's Community Services
+ Grant Emsley
+ gemsley&st-leonards.com
+46770
+ Benz Dataconsulting
+ Christian Benz
+ info&benz-dc.de
+46771
+ Atos IT Services Sp. z o.o.
+ Paweł Antczak
+ pawel.antczak&atos.net
+46772
+ Brig Center for Cancer Care and Survivorship
+ Christy Campbell
+ ccampbell&brigcancercare.com
+46773
+ Voss Kommunikasjon AS
+ Øyvind Fykse
+ oyvind&vossk.no
+46774
+ K4Connect
+ Jonathan Gould
+ jonathan&k4connect.com
+46775
+ Bourgeois Bits LLC
+ Peter Sagerson
+ psagers&bourgeoisbits.com
+46776
+ Westchester Cancer Care
+ Ellen Hantman
+ wcancercare&aol.com
+46777
+ Air New Zealand
+ Mark Sim-Smith
+ mark.sim-smith&airnz.co.nz
+46778
+ NTx Back Office Consulting Group
+ Christian Schindler
+ christian.schindler&ntx.at
+46779
+ Belgian Supreme Administrative Court
+ Pieterjan Montens
+ pmo&raadvst-consetat.be
+46780
+ Leo Angelo
+ Leo Angelo
+ theleoa&gmail.com
+46781
+ Sasola Limited
+ Ian Tyson
+ ian.tyson&sasola.com
+46782
+ John Holland PTY LTD
+ Tim Rollason
+ tim.rollason&jhg.com.au
+46783
+ Nephos6
+ Ciprian Popoviciu
+ chip&nephos6.com
+46784
+ COSMOVISION Co., Ltd.
+ Yutaka Yamatsu
+ yamatsu.yutaka&cosmovision.co.jp
+46785
+ Comark Communications LLC
+ JEAN LABARRE
+ jlabarre&comarktv.com
+46786
+ blue-beam.de
+ Aaron Bulmahn
+ webmaster&blue-beam.de
+46787
+ Sony Computer Entertainment Shanghai Ltd.
+ Chen Wenli
+ wenli.chen&scesh.sony.com
+46788
+ Xabyss Inc.
+ Changwoo Ryu
+ changwoo&xabyss.com
+46789
+ Rains Corp.
+ Thomas Lewis
+ thomaslewis&rains-corp.com
+46790
+ TOYOTA MOTOR CORPORATION
+ Shinichiro Hagihara
+ hagihara&mail.toyota.co.jp
+46791
+ Stephan Fiebrandt
+ Stephan Fiebrandt
+ stephan&fiebrandt.org
+46792
+ ISON Technology Co., Ltd
+ Eric.hung
+ eric.hung&ison.com.tw
+46793
+ ASAT Co., Ltd.
+ Young Hwan Kim (YH Kim)
+ kyhwan&asat.kr
+46794
+ Decision Detective Corporation
+ D. Stewart
+ info&decisiondetective.com
+46795
+ Organization for Security and Co-operation in Europe
+ Andreas Hainz
+ andreas.hainz&osce.org
+46796
+ Bedrock Automation Platforms, Inc.
+ John Weismiller
+ john.weismiller&bedrockautomation.com
+46797
+ The self-financing Science Information Center for New Technologies under State Tax Committee of the Republic of Uzbekistan
+ Azamat Musakhanov
+ sicnt.uz&gmail.com
+46798
+ RBS Services (Switzerland) Ltd
+ Andrew Church
+ andrew.church&rbs-services.com
+46799
+ Interblock d.d.
+ Dobrovoljc Dejan
+ dejan.dobrovoljc&interblockgaming.com
+46800
+ Digitoll Information Technology and Servicing Ltd.
+ Viktor Németh
+ digitoll&digitoll.co.hu
+46801
+ The Hut Group
+ Martyn Ashworth
+ martyn.ashworth&thehutgroup.com
+46802
+ The Business Clinic Ltd
+ Mark Rawlinson
+ mark&thebusinessclinic.ltd.uk
+46803
+ BROCELIA
+ Christophe GOUTEIX
+ gouteix&brocelia.fr
+46804
+ Himnark CJSC
+ Ruben Osipyan
+ melikyanarmen86&gmail.com
+46805
+ Oncology Consultants
+ Jerel Sukarangsan
+ jsukarangsan&oncologyconsultants.com
+46806
+ Mid Florida Hematology Oncology
+ Harish Gowda
+ hgowda&mfhoc.com
+46807
+ Motiv Telecom Group
+ Eugene Bobin
+ gene&motivtelecom.ru
+46808
+ Fall River School District
+ Jim Maynard
+ jmaynard&fallriver.k12.wi.us
+46809
+ KB PROMSVYAZ
+ Viktor Khomenko
+ vx&dbic.pro
+46810
+ Stockton University
+ Brian Cole
+ Brian.Cole&stockton.edu
+46811
+ L'Imprimerie
+ Menard Patrick
+ pmenard&l-imprimerie.fr
+46812
+ Konsortium ICT Pantai Timur
+ Ahmad Fazli Ismail
+ office&k-ict.org
+46813
+ Sunbird Software, Inc.
+ Michael Davidson
+ michael.davidson&sunbirddcim.com
+46814
+ SC3 Technologies Oü
+ Andrew Billington
+ andy.billington&sc3tech.ee
+46815
+ Third Point LLC
+ Scott Zionic
+ it&thirdpoint.com
+46816
+ HELM AG
+ Gregor Glinski
+ g.glinski&helmag.com
+46817
+ Atam Holdings
+ Adam Green
+ adamgreen&atam.com
+46818
+ Systemhaus Scheuschner GmbH
+ Mario Andexel
+ mandexel&scheuschner.de
+46819
+ Attenda Ltd.
+ Julian Jordan
+ julian.jordan&attenda.com
+46820
+ Telekom Malaysia Berhad
+ Mazlaini Yahya
+ mazlaini&tmrnd.com.my
+46821
+ Commandus
+ Andrei Ivanov
+ support&commandus.com
+46822
+ Zhuhai Kingsoft Office Software Co Ltd
+ Chen Jie
+ chenjie4255&gmail.com
+46823
+ Siselectron Technology Ltd
+ Eva Tsai
+ eva&siselectron.com
+46824
+ Certly, Inc.
+ Ian Carroll
+ ian&certly.io
+46825
+ Loop Technologies Limited
+ Glenn McCarthy
+ glennm&looptechnologies.com
+46826
+ OptimalMethods Ltd.
+ Yuriy Demchenko
+ yuriy.demchenko&optimalmethods.ca
+46827
+ Affix Technology Co., Ltd.
+ Sompop Kumnoonsate
+ sompopµx.co.th
+46828
+ Sea and Air Technology, S.L.
+ Francisco Gonzalez
+ fgonzalez&seairtech.com
+46829
+ GLOCK Ges.m.b.H.
+ Christian Mikula
+ christian.mikula&glock.at
+46830
+ LearnConsult - DI Meitz & Ing. Pock OG
+ Christoph Schick
+ christoph.schick&learnconsult.com
+46831
+ GRAUPNER medical solutions GmbH
+ Robert Kreher
+ robert.kreher&graupner-medizin.de
+46832
+ Heylige FRau Latte
+ Robert Pehl
+ robert.pehl&hf-latte-berlin.de
+46833
+ Synapses Technologies, LLC
+ Brian Long
+ Brian.Long&SynapsesTech.com
+46834
+ Martin GmbH für Umwelt- und Energietechnik
+ Guenter Flohe
+ guenter.flohe&martingmbh.de
+46835
+ rf152
+ Richard Franks
+ pen&rf152.co.uk
+46836
+ Bilfinger GreyLogix GmbH
+ Lars Petersen
+ lars.petersen&bilfinger.com
+46837
+ AZD Praha s.r.o.
+ Richard Lammel
+ doz&azd.cz
+46838
+ Swaffer Consulting Ltd.
+ Stuart Swaffer
+ stuart&swaffer.net
+46839
+ RED ELECTRICA DE ESPAÑA SAU
+ José Manuel Moure
+ jmoure&ree.es
+46840
+ Christophorus Club e.V.
+ Henryk Plötz
+ henryk&christophorus.club
+46841
+ Hwacheon Machinery Europe GmbH
+ Steffen Rademacher
+ admin-hme&hwacheon.com
+46842
+ Hamburger Software GmbH & Co. KG
+ Dennis Kronbuegel
+ dennis.kronbuegel&hamburger-software.de
+46843
+ Newfield Automation Ltd.
+ David Jones
+ david.jones&newfieldautomation.com
+46844
+ Dreamtime.net (Thailand) Co., Ltd.
+ Stephen Karrington
+ support&diamondcard.us
+46845
+ Interlink INC
+ Eduardo Malisani
+ support&interlink.com.ar
+46846
+ FLOPNET
+ Krzysztof Zarzycki
+ admin&flopnet.pl
End of Document
{ 3637, "Power & Data Technology, Inc." },
{ 3638, "IntelliReach Corporation" },
{ 3639, "WM-data" },
- { 3640, "Industrial Logic Corporation" },
+ { 3640, "DataPath, Inc." },
{ 3641, "Netaphor Software, Inc." },
{ 3642, "CryptoConsult" },
{ 3643, "DIRTSA" },
{ 4060, "JFAX.COM" },
{ 4061, "Technology Control Services" },
{ 4062, "Astral Point Communications, Inc." },
- { 4063, "ASC Telecom AG" },
+ { 4063, "ASC Technologies AG (formerly 'ASC Telecom AG')" },
{ 4064, "Elma Oy Electronic Trading" },
{ 4065, "InfraServ GmbH & Co Gendorf KG" },
{ 4066, "Carioli Consulting Inc." },
{ 4914, "hole-in-the.net" },
{ 4915, "Sipher Internet Technology Ltd.+44 1494 765335" },
{ 4916, "Blacksound SA" },
- { 4917, "Sistemas Tecnicos de Loterias" },
+ { 4917, "Sociedad Estatal de Loterias y Apuestas de Estado" },
{ 4918, "Taurusent Technologies" },
{ 4919, "Luminate Software Corporation" },
{ 4920, "Boston Globe" },
{ 17984, "SHENZHEN COSHIP SOFTWARE CO.,LTD." },
{ 17985, "kingsoft" },
{ 17986, "Systems Union (Shanghai) Ltd." },
- { 17987, "Cable & Wireless UK" },
+ { 17987, "Vodafone Group Services Limited (formerly 'Cable & Wireless UK')" },
{ 17988, "PYLON R.I.S.C. GmbH" },
{ 17989, "petujek.net" },
{ 17990, "NEC Electronics Corporation" },
{ 20124, "Cologne Systems GmbH" },
{ 20125, "Vitel Software, Inc" },
{ 20126, "LP Agent" },
- { 20127, "Gutenpress" },
+ { 20127, "TTYS0 (formerly 'Gutenpress')" },
{ 20128, "SKH TKO Kei Tak Primary School" },
{ 20129, "SOURCECORP,Inc." },
{ 20130, "Advanced Digital Systems, Inc." },
{ 35085, "EURO-INFORMATION" },
{ 35086, "ReliabilityFirst Corporation" },
{ 35087, "BD Consult A/S" },
- { 35088, "Platinum Solutions, Inc." },
+ { 35088, "SRA International, Inc" },
{ 35089, "Bluebird Electronics Ltd" },
{ 35090, "CTI" },
{ 35091, "Mitec Telecom Inc" },
{ 39027, "www.duowan.com" },
{ 39028, "Enkata" },
{ 39029, "Lukse" },
- { 39030, "wlan-partner.com AG" },
+ { 39030, "CloudGuard Software AG (formerly 'wlan-partner.com AG')" },
{ 39031, "Eastern Mennonite University" },
{ 39032, "Caldwell Memorial Hospital, Inc." },
{ 39033, "Quinstar Technology, Inc." },
{ 46731, "Institut fuer medizinische und pharmazeutische Pruefungsfragen" },
{ 46732, "Vedang Radio Technology Pvt. Limited" },
{ 46733, "DOM-P Zrt" },
+ { 46734, "TCCC" },
+ { 46735, "Silhouette International Schmied AG" },
+ { 46736, "Powertech IT Services S.R.L." },
+ { 46737, "Amphinicy Technologies" },
+ { 46738, "Beeler IT Services" },
+ { 46739, "RONIT. N.THAKOR " },
+ { 46740, "Zendesk, Inc" },
+ { 46741, "Aspect Enterprise Solutions Inc." },
+ { 46742, "Global Biodiversity Information Facility (GBIF)" },
+ { 46743, "Technology Architects LLC" },
+ { 46744, "Transaction Technologies Pte Ltd" },
+ { 46745, "Joe Thielen" },
+ { 46746, "Weill Cornell Medicine" },
+ { 46747, "The Christ Hospital Hem Onc " },
+ { 46748, "Alliance Technology Group, LLC" },
+ { 46749, "121 Marketing Services Group, Inc." },
+ { 46750, "MobilSign Ltd." },
+ { 46751, "Carrizo Oil & Gas, Inc." },
+ { 46752, "THE MINNITI CENTER FOR MEDICAL ONCOLOGY & HEMATOLOGY" },
+ { 46753, "Hematology Oncology Clinic, LLP" },
+ { 46754, "NETFOX AG" },
+ { 46755, "Nexgen Oncology" },
+ { 46756, "Michael Oberdorf IT-Consulting" },
+ { 46757, "DeMoulas Market Basket, Inc." },
+ { 46758, "CarMax" },
+ { 46759, "CoverMyMeds" },
+ { 46760, "Teksush.com" },
+ { 46761, "Groupe JVS" },
+ { 46762, "Atos IT Solutions and Services GmbH" },
+ { 46763, "alfer aluminium Gesellschaft mbH" },
+ { 46764, "HealthInsight" },
+ { 46765, "Sviaz-Bank" },
+ { 46766, "Creatcomm Technology" },
+ { 46767, "CarMax, Inc" },
+ { 46768, "Symphony Communication Services LLC" },
+ { 46769, "St. Leonard's Community Services" },
+ { 46770, "Benz Dataconsulting" },
+ { 46771, "Atos IT Services Sp. z o.o." },
+ { 46772, "Brig Center for Cancer Care and Survivorship" },
+ { 46773, "Voss Kommunikasjon AS" },
+ { 46774, "K4Connect" },
+ { 46775, "Bourgeois Bits LLC" },
+ { 46776, "Westchester Cancer Care" },
+ { 46777, "Air New Zealand" },
+ { 46778, "NTx Back Office Consulting Group" },
+ { 46779, "Belgian Supreme Administrative Court" },
+ { 46780, "Leo Angelo" },
+ { 46781, "Sasola Limited" },
+ { 46782, "John Holland PTY LTD" },
+ { 46783, "Nephos6" },
+ { 46784, "COSMOVISION Co., Ltd." },
+ { 46785, "Comark Communications LLC" },
+ { 46786, "blue-beam.de" },
+ { 46787, "Sony Computer Entertainment Shanghai Ltd." },
+ { 46788, "Xabyss Inc." },
+ { 46789, "Rains Corp." },
+ { 46790, "TOYOTA MOTOR CORPORATION" },
+ { 46791, "Stephan Fiebrandt" },
+ { 46792, "ISON Technology Co., Ltd" },
+ { 46793, "ASAT Co., Ltd." },
+ { 46794, "Decision Detective Corporation" },
+ { 46795, "Organization for Security and Co-operation in Europe" },
+ { 46796, "Bedrock Automation Platforms, Inc." },
+ { 46797, "The self-financing Science Information Center for New Technologies under State Tax Committee of the Republic of Uzbekistan" },
+ { 46798, "RBS Services (Switzerland) Ltd " },
+ { 46799, "Interblock d.d." },
+ { 46800, "Digitoll Information Technology and Servicing Ltd." },
+ { 46801, "The Hut Group" },
+ { 46802, "The Business Clinic Ltd" },
+ { 46803, "BROCELIA" },
+ { 46804, "Himnark CJSC" },
+ { 46805, "Oncology Consultants" },
+ { 46806, "Mid Florida Hematology Oncology " },
+ { 46807, "Motiv Telecom Group" },
+ { 46808, "Fall River School District" },
+ { 46809, "KB PROMSVYAZ" },
+ { 46810, "Stockton University" },
+ { 46811, "L'Imprimerie" },
+ { 46812, "Konsortium ICT Pantai Timur" },
+ { 46813, "Sunbird Software, Inc." },
+ { 46814, "SC3 Technologies O\0303\0274" },
+ { 46815, "Third Point LLC" },
+ { 46816, "HELM AG" },
+ { 46817, "Atam Holdings" },
+ { 46818, "Systemhaus Scheuschner GmbH" },
+ { 46819, "Attenda Ltd." },
+ { 46820, "Telekom Malaysia Berhad" },
+ { 46821, "Commandus" },
+ { 46822, "Zhuhai Kingsoft Office Software Co Ltd" },
+ { 46823, "Siselectron Technology Ltd" },
+ { 46824, "Certly, Inc." },
+ { 46825, "Loop Technologies Limited" },
+ { 46826, "OptimalMethods Ltd." },
+ { 46827, "Affix Technology Co., Ltd." },
+ { 46828, "Sea and Air Technology, S.L." },
+ { 46829, "GLOCK Ges.m.b.H." },
+ { 46830, "LearnConsult - DI Meitz & Ing. Pock OG" },
+ { 46831, "GRAUPNER medical solutions GmbH" },
+ { 46832, "Heylige FRau Latte" },
+ { 46833, "Synapses Technologies, LLC" },
+ { 46834, "Martin GmbH f\0303\0274r Umwelt- und Energietechnik" },
+ { 46835, "rf152" },
+ { 46836, "Bilfinger GreyLogix GmbH" },
+ { 46837, "AZD Praha s.r.o." },
+ { 46838, "Swaffer Consulting Ltd." },
+ { 46839, "RED ELECTRICA DE ESPA\0303\0221A SAU" },
+ { 46840, "Christophorus Club e.V." },
+ { 46841, "Hwacheon Machinery Europe GmbH" },
+ { 46842, "Hamburger Software GmbH & Co. KG" },
+ { 46843, "Newfield Automation Ltd." },
+ { 46844, "Dreamtime.net (Thailand) Co., Ltd." },
+ { 46845, "Interlink INC" },
+ { 46846, "FLOPNET" },
{ 0, NULL}
};
00:21:FA A4spTech # A4SP Technologies Ltd.
00:21:FB LgElectr # LG Electronics
00:21:FC NokiaDan # Nokia Danmark A/S
-00:21:FD DstaSL # DSTA S.L.
+00:21:FD LacroixT # LACROIX TRAFFIC S.A.U
00:21:FE NokiaDan # Nokia Danmark A/S
00:21:FF CyfrowyP # Cyfrowy Polsat SA
00:22:00 IbmCorp # IBM Corp
00:23:3D NoveroBV # Novero holding B.V.
00:23:3E Alcatel- # Alcatel-Lucent-IPD
00:23:3F Purechoi # Purechoice Inc
-00:23:40 MixTelem # MiX Telematics
+00:23:40 Mixtelem # MiXTelematics
00:23:41 SiemensI # Siemens AB, Infrastructure & Cities, Building Technologies Division, IC BT SSP SP BA PR
00:23:42 CoffeeEq # Coffee Equipment Company
00:23:43 TemAg # TEM AG
00:33:6C Synapsen # SynapSense Corporation
00:34:F1 RadicomR # Radicom Research, Inc.
00:34:FE HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
+00:35:1A CiscoInc # Cisco Systems, Inc
00:35:32 Electro- # Electro-Metrics Corporation
00:35:60 RosenAvi # Rosen Aviation
00:36:76 PacePlc # Pace plc
00:50:55 DomsA/S # DOMS A/S
00:50:56 Vmware # VMware, Inc.
00:50:57 Broadban # BROADBAND ACCESS SYSTEMS
-00:50:58 Vegastre # VegaStream Group Limted
+00:50:58 SangomaT # Sangoma Technologies
00:50:59 Ibahn # iBAHN
00:50:5A NetworkA # NETWORK ALCHEMY, INC.
00:50:5B Kawasaki # KAWASAKI LSI U.S.A., INC.
00:60:D9 TransysN # TRANSYS NETWORKS INC.
00:60:DA RedLionC # Red Lion Controls, LP
00:60:DB NtpElekt # NTP ELEKTRONIK A/S
-00:60:DC ToyoNetw # Toyo Network Systems & System Integration Co. LTD
+00:60:DC NecMagnu # NEC Magnus Communications,Ltd.
00:60:DD Myricom # MYRICOM, INC.
00:60:DE Kayser-T # Kayser-Threde GmbH
00:60:DF BrocadeC # Brocade Communications Systems, Inc.
00:6B:8E Shanghai # Shanghai Feixun Communication Co.,Ltd.
00:6B:9E VizioInc # VIZIO Inc
00:6B:A0 Shenzhen # SHENZHEN UNIVERSAL INTELLISYS PTE LTD
+00:6C:FD SichuanC # Sichuan Changhong Electric Ltd.
00:6D:52 Apple # Apple, Inc.
00:6D:FB VutrixTe # Vutrix Technologies Ltd
00:70:B0 M/A-ComC # M/A-COM INC. COMPANIES
00:80:B5 UnitedNe # UNITED NETWORKS INC.
00:80:B6 ThemisCo # THEMIS COMPUTER
00:80:B7 StellarC # STELLAR COMPUTER
-00:80:B8 BUGMoris # B.U.G. MORISEIKI, INCORPORATED
+00:80:B8 DmgMoriB # DMG MORI B.U.G. CO., LTD.
00:80:B9 ArcheTec # ARCHE TECHNOLIGIES INC.
00:80:BA Speciali # SPECIALIX (ASIA) PTE, LTD
00:80:BB HughesLa # HUGHES LAN SYSTEMS
00:80:E2 TDI # T.D.I. CO., LTD.
00:80:E3 CoralNet # CORAL NETWORK CORPORATION
00:80:E4 Northwes # NORTHWEST DIGITAL SYSTEMS, INC
-00:80:E5 NetappIn # NetApp, Inc
+00:80:E5 Netapp # NetApp
00:80:E6 PeerNetw # PEER NETWORKS, INC.
00:80:E7 LynwoodS # LYNWOOD SCIENTIFIC DEV. LTD.
00:80:E8 CumulusC # CUMULUS CORPORATIION
00:90:4D SpecSA # SPEC S.A.
00:90:4E DelemBv # DELEM BV
00:90:4F AbbPower # ABB POWER T&D COMPANY, INC.
-00:90:50 TelesteO # TELESTE OY
+00:90:50 TelesteC # Teleste Corporation
00:90:51 Ultimate # ULTIMATE TECHNOLOGY CORP.
00:90:52 SelcomEl # SELCOM ELETTRONICA S.R.L.
00:90:53 DaewooEl # DAEWOO ELECTRONICS CO., LTD.
00:AA:70 LgElectr # LG Electronics
00:AC:E0 ArrisGro # ARRIS Group, Inc.
00:AE:FA MurataMa # Murata Manufacturing Co., Ltd.
+00:AF:1F CiscoInc # Cisco Systems, Inc
00:B0:09 GrassVal # Grass Valley, A Belden Brand
00:B0:17 Infogear # InfoGear Technology Corp.
00:B0:19 UtcCcs # UTC CCS
00:D0:E9 Advantag # Advantage Century Telecommunication Corp.
00:D0:EA NextoneC # NEXTONE COMMUNICATIONS, INC.
00:D0:EB Lightera # LIGHTERA NETWORKS, INC.
-00:D0:EC NakayoTe # NAKAYO TELECOMMUNICATIONS, INC
+00:D0:EC NakayoTe # NAKAYO TELECOMMUNICATIONS,INC
00:D0:ED Xiox # XIOX
00:D0:EE Dictapho # DICTAPHONE CORPORATION
00:D0:EF Igt # IGT
00:D1:1C Acetel # ACETEL
00:D3:8D HotelTec # Hotel Technology Next Generation
00:D6:32 GeEnergy # GE Energy
-00:D9:D1 SonyCorp # Sony Corporation
+00:D9:D1 SonyComp # Sony Computer Entertainment Inc.
00:DA:55 CiscoInc # Cisco Systems, Inc
00:DB:1E AlbedoTe # Albedo Telecom SL
00:DB:45 Thamway # THAMWAY CO.,LTD.
04:78:63 Shanghai # Shanghai MXCHIP Information Technology Co., Ltd.
04:7D:50 Shenzhen # Shenzhen Kang Ying Technology Co.Ltd.
04:7D:7B QuantaCo # Quanta Computer Inc.
+04:7E:4A Moobox # moobox CO., Ltd.
04:81:AE ClackCor # Clack Corporation
04:84:8A 7inovaTe # 7INOVA TECHNOLOGY LIMITED
04:88:45 BayNetwo # Bay Networks token ring line card
08:1F:3F Wondalin # WondaLink Inc.
08:1F:EB Bincube # BinCube
08:1F:F3 CiscoInc # Cisco Systems, Inc
+08:21:EF SamsungE # Samsung Electronics Co.,Ltd
08:25:22 Advansee # ADVANSEE
08:27:19 ApsSyste # APS systems/electronic AG
08:2A:D0 SrdInnov # SRD Innovations Inc.
0C:F9:C0 BskybLtd # BSkyB Ltd
0C:FC:83 AirohaTe # Airoha Technology Corp.,
0C:FD:37 SuseLinu # SUSE Linux GmbH
-0C:FE:45 SonyCorp # Sony Corporation
+0C:FE:45 SonyComp # Sony Computer Entertainment Inc.
10:00:00 Private # Private
10:00:5A IbmCorp # IBM Corp
10:00:90 HP
10:22:79 Zerodesk # ZeroDesktop, Inc.
10:27:BE Tvip # TVIP
10:28:31 Morion # Morion Inc.
+10:2A:B3 XiaomiCo # Xiaomi Communications Co Ltd
10:2C:83 Ximea # XIMEA
10:2D:96 Looxcie # Looxcie Inc.
10:2E:AF TexasIns # Texas Instruments
10:4B:46 Mitsubis # Mitsubishi Electric Corporation
10:4D:77 Innovati # Innovative Computer Engineering
10:4E:07 Shanghai # Shanghai Genvision Industries Co.,Ltd
+10:4F:A8 SonyComp # Sony Computer Entertainment Inc.
10:51:72 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
10:56:CA PeplinkI # Peplink International Ltd.
10:5C:3B Perma-Pi # Perma-Pipe, Inc.
10:71:F9 CloudTel # Cloud Telecomputers, LLC
10:76:8A Eocell # EoCell
10:77:B1 SamsungE # Samsung Electronics Co.,Ltd
+10:78:5B Actionte # Actiontec Electronics, Inc
10:78:73 Shenzhen # Shenzhen Jinkeyi Communication Co., Ltd.
10:78:CE HanvitSi # Hanvit SI, Inc.
10:78:D2 Elitegro # ELITEGROUP COMPUTER SYSTEM CO., LTD.
14:B4:84 SamsungE # Samsung Electronics Co.,Ltd
14:B7:3D ArcheanT # ARCHEAN Technologies
14:B9:68 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
+14:BB:6E SamsungE # Samsung Electronics Co.,Ltd
14:C0:89 DuneHdLt # DUNE HD LTD
14:C1:26 NokiaCor # Nokia Corporation
14:C2:1D SabtechI # Sabtech Industries
+14:C3:C2 KASchmer # K.A. Schmersal GmbH & Co. KG
14:CC:20 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
14:CF:8D OhsungEl # OHSUNG ELECTRONICS CO., LTD.
14:CF:92 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
18:9C:5D CiscoInc # Cisco Systems, Inc
18:9E:FC Apple # Apple, Inc.
18:A3:E8 Fiberhom # Fiberhome Telecommunication Tech.Co.,Ltd.
+18:A6:F7 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
18:A9:05 HewlettP # Hewlett Packard
18:A9:58 Provisio # PROVISION THAI CO., LTD.
18:A9:9B Dell # Dell Inc.
1C:21:D1:D0:00:00/28 Liscotec # Liscotech System Co., Ltd.
1C:21:D1:E0:00:00/28 P2-Plus # p2-plus inc.
1C:21:D1:F0:00:00/28 Private # Private
+1C:23:4F EdmiEuro # EDMI Europe Ltd
1C:33:4D ItsTelec # ITS Telecom
1C:34:77 Innovati # Innovation Wireless
1C:35:F1 NewLiftN # NEW Lift Neue Elektronische Wege Steuerungsbau GmbH
1C:5A:6B PhilipsE # Philips Electronics Nederland BV
1C:5C:55 PrimaCin # PRIMA Cinema, Inc
1C:5C:60 Shenzhen # Shenzhen Belzon Technology Co.,LTD.
+1C:5C:F2 Apple # Apple, Inc.
1C:5F:FF BeijingE # Beijing Ereneben Information Technology Co.,Ltd Shenzhen Branch
1C:60:DE Shenzhen # SHENZHEN MERCURY COMMUNICATION TECHNOLOGIES CO.,LTD.
1C:62:B8 SamsungE # Samsung Electronics Co.,Ltd
1C:97:3D PricomDe # PRICOM Design
1C:99:4C MurataMa # Murata Manufacturing Co., Ltd.
1C:9C:26 ZoovelTe # Zoovel Technologies
+1C:9E:46 Apple # Apple, Inc.
1C:9E:CB BeijingN # Beijing Nari Smartchip Microelectronics Company Limited
1C:A2:B1 RuwidoAu # ruwido austria gmbh
1C:A5:32 Shenzhen # Shenzhen Gongjin Electronics Co.,Ltd
20:4C:6D HugoBren # Hugo Brennenstuhl Gmbh & Co. KG.
20:4C:9E CiscoInc # Cisco Systems, Inc
20:4E:6B AxxanaIs # Axxana(israel) ltd
+20:4E:71 JuniperN # Juniper Networks
20:4E:7F Netgear # NETGEAR
20:53:CA RiskTech # Risk Technology Ltd
20:54:76 SonyMobi # Sony Mobile Communications AB
20:73:55 ArrisGro # ARRIS Group, Inc.
20:74:CF Shenzhen # Shenzhen Voxtech Co.,Ltd
20:76:00 Actionte # Actiontec Electronics, Inc
+20:76:8F Apple # Apple, Inc.
20:76:93 LenovoBe # Lenovo (Beijing) Limited.
20:78:F0 Apple # Apple, Inc.
20:7C:8F QuantaMi # Quanta Microsystems,Inc.
24:65:11 AvmGmbh # AVM GmbH
24:69:3E Innodisk # innodisk Corporation
24:69:4A Jasmine # Jasmine Systems Inc.
+24:69:68 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
24:69:A5 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
24:6A:AB It-IsInt # IT-IS International
24:6C:8A YukaiEng # YUKAI Engineering
28:06:8D ItlLlc # ITL, LLC
28:0B:5C Apple # Apple, Inc.
28:0C:B8 Mikrosay # Mikrosay Yazilim ve Elektronik A.S.
-28:0D:FC SonyCorp # Sony Corporation
+28:0D:FC SonyComp # Sony Computer Entertainment Inc.
28:0E:8B BeijingS # Beijing Spirit Technology Development Co., Ltd.
28:10:1B Magnacom # MagnaCom
28:10:7B D-LinkIn # D-Link International
28:9A:4B Steelser # SteelSeries ApS
28:9A:FA TctMobil # TCT Mobile Limited
28:9E:DF DanfossT # Danfoss Turbocor Compressors, Inc
+28:A0:2B Apple # Apple, Inc.
28:A1:83 AlpsElec # ALPS ELECTRIC CO.,LTD.
28:A1:86 Enblink # enblink
28:A1:92 GerpSolu # GERP Solution
2C:44:01 SamsungE # Samsung Electronics Co.,Ltd
2C:44:1B Spectrum # Spectrum Medical Limited
2C:44:FD HewlettP # Hewlett Packard
+2C:4D:79 Goertek # GoerTek Inc.
2C:50:89 Shenzhen # Shenzhen Kaixuan Visual Technology Co.,Limited
2C:53:4A Shenzhen # Shenzhen Winyao Electronic Limited
2C:54:2D CiscoInc # Cisco Systems, Inc
30:60:23 ArrisGro # ARRIS Group, Inc.
30:61:12 PavGmbh # PAV GmbH
30:61:18 Paradom # Paradom Inc.
+30:63:6B Apple # Apple, Inc.
30:65:EC WistronC # Wistron (ChongQing)
30:68:8C ReachTec # Reach Technology Inc.
30:69:4B Rim # RIM
30:C7:50 MicTechn # MIC Technology Group
30:C7:AE SamsungE # Samsung Electronics Co.,Ltd
30:C8:2A Wi-NextS # Wi-Next s.r.l.
+30:CB:F8 SamsungE # Samsung Electronics Co.,Ltd
30:CD:A7 SamsungE # Samsung Electronics ITS, Printer division
30:D1:7E HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
30:D3:2D DevoloAg # devolo AG
34:12:98 Apple # Apple, Inc.
34:13:A8 Mediplan # Mediplan Limited
34:13:E8 IntelCor # Intel Corporate
+34:14:5F SamsungE # Samsung Electronics Co.,Ltd
34:15:9E Apple # Apple, Inc.
34:17:EB Dell # Dell Inc.
34:1A:4C Shenzhen # SHENZHEN WEIBU ELECTRONICS CO.,LTD.
34:81:37 UnicardS # UNICARD SA
34:81:C4 AvmGmbh # AVM GmbH
34:81:F4 SstTaiwa # SST Taiwan Ltd.
-34:82:DE KayoTech # Kayo Technology, Inc.
+34:82:DE KiioInc # Kiio Inc
34:83:02 IforcomL # iFORCOM Co., Ltd
34:84:46 Ericsson # Ericsson AB
34:86:2A HeinzLac # Heinz Lackmann GmbH & Co KG
38:AA:3C SamsungE # SAMSUNG ELECTRO-MECHANICS
38:B1:2D Sonotron # Sonotronic Nagel GmbH
38:B1:DB HonHaiPr # Hon Hai Precision Ind. Co.,Ltd.
+38:B5:4D Apple # Apple, Inc.
38:B5:BD EGOElekt # E.G.O. Elektro-Ger
38:B7:25 WistronI # Wistron Infocomm (Zhongshan) Corporation
38:B7:4D Fijowave # Fijowave Limited
+38:B8:EB IeeeRegi # IEEE Registration Authority
+38:B8:EB:00:00:00/28 BumjinC& # Bumjin C&L Co., Ltd.
+38:B8:EB:10:00:00/28 1AConnec # 1.A Connect GmbH
+38:B8:EB:20:00:00/28 BaroxKom # barox Kommunikation GmbH
+38:B8:EB:30:00:00/28 AinaWire # Aina Wireless Inc
+38:B8:EB:40:00:00/28 Umlogics # UMLOGICS
+38:B8:EB:50:00:00/28 Dojo-Lab # Dojo-Labs Ltd
+38:B8:EB:60:00:00/28 Matrixst # MATRIXSTREAM TECHNOLOGIES, INC.
+38:B8:EB:70:00:00/28 Private # Private
+38:B8:EB:80:00:00/28 CeenexIn # CeeNex Inc
+38:B8:EB:90:00:00/28 NhsSiste # NHS Sistemas de Energia
+38:B8:EB:A0:00:00/28 SecadSa # SECAD SA
+38:B8:EB:B0:00:00/28 Exascale # ExaScaler Inc.
+38:B8:EB:C0:00:00/28 AjaxInc # Ajax Systems Inc
+38:B8:EB:D0:00:00/28 Yellowbr # Yellowbrick Data, Inc.
+38:B8:EB:E0:00:00/28 WyresSas # Wyres SAS
38:BB:23 Ozvision # OzVision America LLC
38:BB:3C AvayaInc # Avaya Inc
38:BC:1A MeizuTec # Meizu technology co.,ltd
3C:04:BF Pravis # PRAVIS SYSTEMS Co.Ltd.,
3C:05:AB ProductC # Product Creation Studio
3C:07:54 Apple # Apple, Inc.
-3C:07:71 SonyCorp # Sony Corporation
+3C:07:71 SonyComp # Sony Computer Entertainment Inc.
3C:08:1E BeijingY # Beijing Yupont Electric Power Technology Co.,Ltd
3C:08:F6 CiscoInc # Cisco Systems, Inc
3C:09:6D Powerhou # Powerhouse Dynamics
3C:BB:73 Shenzhen # Shenzhen Xinguodu Technology Co., Ltd.
3C:BB:FD SamsungE # Samsung Electronics Co.,Ltd
3C:BD:D8 LgElectr # LG ELECTRONICS INC
+3C:BE:E1 NikonCor # NIKON CORPORATION
3C:C0:C6 D&BAudio # d&b audiotechnik GmbH
3C:C1:2C AesCorpo # AES Corporation
3C:C1:F6 MelangeP # Melange Systems Pvt. Ltd.
40:37:AD MacroIma # Macro Image Technology, Inc.
40:3C:FC Apple # Apple, Inc.
40:3D:EC Humax # HUMAX Co., Ltd.
+40:3F:8C Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
40:40:22 Ziv # ZIV
40:40:6B Icomera # Icomera
40:40:A7 SonyMobi # Sony Mobile Communications AB
40:CD:3A Z3Techno # Z3 Technology
40:D2:8A Nintendo # Nintendo Co., Ltd.
40:D3:2D Apple # Apple, Inc.
+40:D3:57 IsonTech # Ison Technology Co., Ltd.
40:D4:0E BiodataL # Biodata Ltd
40:D5:59 MicroSER # MICRO S.E.R.I.
40:D8:55 IeeeRegi # IEEE Registration Authority
4C:54:99 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
4C:55:85 Hamilton # Hamilton Systems
4C:55:B8 Turkcell # Turkcell Teknoloji
-4C:55:CC AckmeNet # ACKme Networks Pty Ltd
+4C:55:CC ZentriPt # Zentri Pty Ltd
4C:5D:CD OyFinnis # Oy Finnish Electric Vehicle Technologies Ltd
4C:5E:0C Routerbo # Routerboard.com
4C:5F:D2 Alcatel- # Alcatel-Lucent
4C:B0:E8 BeijingR # Beijing RongZhi xinghua technology co., LTD
4C:B1:6C HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
4C:B1:99 Apple # Apple, Inc.
+4C:B4:4A Nanowave # NANOWAVE Technologies Inc.
4C:B4:EA HrdSPte # HRD (S) PTE., LTD.
4C:B7:6D NoviSecu # Novi Security
4C:B8:1C SamElect # SAM Electronics GmbH
4C:CA:53 Skyera # Skyera, Inc.
4C:CB:F5 ZteCorpo # zte corporation
4C:CC:34 Motorola # Motorola Solutions Inc.
+4C:CC:6A Micro-St # Micro-Star INTL CO., LTD.
4C:D0:8A Humax # HUMAX Co., Ltd.
4C:D6:37 QsonoEle # Qsono Electronics Co., Ltd
4C:D7:B6 HelmerSc # Helmer Scientific
50:D2:74 SteffesC # Steffes Corporation
50:D5:9C ThaiHabe # Thai Habel Industrial Co., Ltd.
50:D6:D7 Takahata # Takahata Precision
+50:DA:00 Hangzhou # Hangzhou H3C Technologies Co., Limited
50:DF:95 Lytx # Lytx
50:E0:C7 Turcontr # TurControlSystme AG
50:E1:4A Private # Private
70:82:0E AsElectr # as electronics GmbH
70:82:8E Oleumtec # OleumTech Corporation
70:85:C6 PacePlc # Pace plc
+70:88:4D JapanRad # JAPAN RADIO CO., LTD.
70:88:6B:00:00:00/28 Veracity # Veracity UK Ltd
70:88:6B:10:00:00/28 Bitfinde # Bitfinder Inc
70:88:6B:20:00:00/28 Cvnet # CVnet
70:9B:A5 Shenzhen # Shenzhen Y&D Electronics Co.,LTD.
70:9B:FC Bryton # Bryton Inc.
70:9C:8F NeroAg # Nero AG
-70:9E:29 SonyCorp # Sony Corporation
+70:9E:29 SonyComp # Sony Computer Entertainment Inc.
70:9E:86 X6dLimit # X6D Limited
70:9F:2D ZteCorpo # zte corporation
70:A1:91 Trendset # Trendsetter Medical, LLC
70:B3:D5:09:20:00/36 InomedMe # inomed Medizintechnik GmbH
70:B3:D5:09:70:00/36 AvantTec # Avant Technologies
70:B3:D5:09:90:00/36 Schwer+K # Schwer+Kopka GmbH
+70:B3:D5:09:E0:00/36 Mobiprom # MobiPromo
70:B3:D5:0A:40:00/36 Communic # Communication Technology Ltd.
70:B3:D5:0A:50:00/36 Fuelcell # FUELCELLPOWER
70:B3:D5:0A:60:00/36 PaConsul # PA CONSULTING SERVICES
70:B3:D5:11:20:00/36 DitestFa # DiTEST Fahrzeugdiagnose GmbH
70:B3:D5:11:90:00/36 Private # Private
70:B3:D5:11:D0:00/36 TexkaLab # Texka Labs
+70:B3:D5:12:00:00/36 GspSprac # GSP Sprachtechnologie GmbH
70:B3:D5:12:40:00/36 Forschun # Forschungs- und Transferzentrum Leipzig e.V.
70:B3:D5:13:40:00/36 ConjingN # Conjing Networks Inc.
70:B3:D5:13:90:00/36 Tunstall # Tunstall A/S
70:B3:D5:13:F0:00/36 Farmobil # Farmobile
70:B3:D5:14:00:00/36 VirtaLab # Virta Laboratories, Inc.
70:B3:D5:14:60:00/36 3cityEle # 3City Electronics
+70:B3:D5:14:80:00/36 PowerEle # Power Electronics Espana, S.L.
70:B3:D5:14:E0:00/36 Innosoni # Innosonix GmbH
70:B3:D5:14:F0:00/36 MobileDe # Mobile Devices Unlimited
70:B3:D5:15:20:00/36 XpedPtyL # Xped Corporation Pty Ltd
70:B3:D5:23:00:00/36 CtCompan # CT Company
70:B3:D5:23:10:00/36 DeltaTau # DELTA TAU DATA SYSTEMS, INC.
70:B3:D5:23:C0:00/36 Quasonix # Quasonix, LLC
+70:B3:D5:23:E0:00/36 TornadoM # Tornado Modular Systems
70:B3:D5:24:30:00/36 Rohde&Sc # Rohde&Schwarz Topex SA
70:B3:D5:25:00:00/36 DatumEle # Datum Electronics Limited
70:B3:D5:25:B0:00/36 GidIndus # GID Industrial
+70:B3:D5:26:10:00/36 PotterEl # Potter Electric Signal Co. LLC
70:B3:D5:26:60:00/36 SpectraD # Spectra Displays Ltd
70:B3:D5:26:E0:00/36 Hi-TechS # HI-TECH SYSTEM Co. Ltd.
70:B3:D5:27:80:00/36 Private # Private
70:B3:D5:48:D0:00/36 OmegaBil # OMEGA BILANCE SRL SOCIETA' UNIPERSONALE
70:B3:D5:48:E0:00/36 AllimSys # Allim System Co,.Ltd.
70:B3:D5:49:40:00/36 Schildkn # Schildknecht AG
+70:B3:D5:49:E0:00/36 CaptempL # CAPTEMP, Lda
70:B3:D5:4A:10:00/36 Herholdt # Herholdt Controls srl
70:B3:D5:4A:A0:00/36 TwowayCo # Twoway Communications, Inc.
70:B3:D5:4A:D0:00/36 Gaci # GACI
70:B3:D5:4B:10:00/36 LaceLlc # LACE LLC.
+70:B3:D5:4B:60:00/36 Veilux # VEILUX INC.
70:B3:D5:4B:90:00/36 ShenZhen # SHEN ZHEN TTK TECHNOLOGY CO,LTD
70:B3:D5:4B:A0:00/36 Sinftech # Sinftech LLC
70:B3:D5:4B:B0:00/36 Plazma-T # Plazma-T
70:B3:D5:59:D0:00/36 Servicio # servicios de consultoria independiente S.L.
70:B3:D5:5A:00:00/36 AsconTec # Ascon Tecnologic S.r.l.
70:B3:D5:5A:20:00/36 WallnerA # Wallner Automation GmbH
+70:B3:D5:5A:30:00/36 CtCompan # CT Company
70:B3:D5:5A:80:00/36 Farmobil # Farmobile
70:B3:D5:5A:90:00/36 BunkaShu # Bunka Shutter Co., Ltd.
70:B3:D5:5A:A0:00/36 ChugokuE # Chugoku Electric Manufacturing Co.,Inc
70:B3:D5:60:B0:00/36 Edgeware # Edgeware AB
70:B3:D5:60:C0:00/36 IstElekt # IST ElektronikgesmbH
70:B3:D5:61:00:00/36 Polvisio # POLVISION
+70:B3:D5:61:80:00/36 MotecPty # Motec Pty Ltd
70:B3:D5:61:F0:00/36 Labotect # Labotect Labor-Technik-Göttingen GmbH
70:B3:D5:62:50:00/36 VxInstru # VX Instruments GmbH
70:B3:D5:62:80:00/36 MectSRL # MECT S.R.L.
70:B3:D5:7C:80:00/36 Crde # CRDE
70:B3:D5:7C:D0:00/36 Molekule # Molekuler Goruntuleme A.S.
70:B3:D5:7C:E0:00/36 AplexTec # Aplex Technology Inc.
+70:B3:D5:7C:F0:00/36 OrcaTech # ORCA Technologies, LLC
70:B3:D5:7E:30:00/36 RedleafS # RedLeaf Security
70:B3:D5:7E:40:00/36 C21Ltd # C21 Systems Ltd
70:B3:D5:7E:70:00/36 Atessa # Atessa, Inc.
70:B3:D5:7E:F0:00/36 CravisLi # CRAVIS CO., LIMITED
70:B3:D5:7F:10:00/36 Aerovisi # AeroVision Avionics, Inc.
70:B3:D5:7F:20:00/36 Tci # TCI
+70:B3:D5:80:A0:00/36 SensingL # SENSING LABS
70:B3:D5:80:D0:00/36 DataPhys # Data Physics Corporation
70:B3:D5:80:F0:00/36 Quickwar # Quickware Eng & Des LLC
70:B3:D5:81:10:00/36 Cjsc«Int # CJSC «INTERSET»
70:B3:D5:88:A0:00/36 Percepti # Perceptics, LLC
70:B3:D5:88:F0:00/36 QuaestaI # Quaesta Instruments, LLC
70:B3:D5:89:10:00/36 Neocontr # neocontrol soluções em automação
+70:B3:D5:89:20:00/36 Abb # ABB
70:B3:D5:89:30:00/36 Cubitech # Cubitech
70:B3:D5:8A:00:00/36 DmRadioc # DM RADIOCOM
70:B3:D5:8A:40:00/36 PhytonMi # Phyton, Inc. Microsystems and Development Tools
+70:B3:D5:8A:60:00/36 Crde # CRDE
70:B3:D5:8A:B0:00/36 Emac # EMAC, Inc.
70:B3:D5:8A:D0:00/36 GlobalCo # Global Communications Technology LLC
70:B3:D5:8B:10:00/36 M-TechIn # M-Tech Innovations Ltd
70:B3:D5:8B:20:00/36 NpfModem # NPF Modem, LLC
+70:B3:D5:8B:E0:00/36 Connoise # Connoiseur Electronics Private Limited
70:B3:D5:8C:E0:00/36 CoresCor # CORES Corporation
70:B3:D5:8D:C0:00/36 NiveoInt # Niveo International BV
70:B3:D5:8E:00:00/36 SoudaxEq # SOUDAX EQUIPEMENTS
70:B3:D5:99:60:00/36 Xpertsea # XpertSea Solutions inc.
70:B3:D5:99:F0:00/36 ConfedBV # Confed Holding B.V.
70:B3:D5:9A:70:00/36 Honeywel # Honeywell
+70:B3:D5:9B:A0:00/36 AtimRadi # ATIM Radiocommunication
70:B3:D5:9B:D0:00/36 SignalPr # Signal Processing Devices Sweden AB
70:B3:D5:9C:80:00/36 AppliedE # Applied Systems Engineering, Inc.
70:B3:D5:9C:90:00/36 PkSound # PK Sound
70:B3:D5:B8:D0:00/36 Jungwooe # JungwooEng Co., Ltd
70:B3:D5:B8:F0:00/36 Assembly # Assembly Contracts Ltd
70:B3:D5:B9:10:00/36 Dynetics # Dynetics, Inc.
+70:B3:D5:B9:90:00/36 Domosafe # DomoSafety S.A.
70:B3:D5:B9:B0:00/36 Elektron # Elektronik Art
70:B3:D5:BA:40:00/36 EiwaGike # EIWA GIKEN INC.
70:B3:D5:BA:B0:00/36 AxotecTe # Axotec Technologies GmbH
70:B3:D5:BE:F0:00/36 Sensorte # Sensortech Systems Inc.
70:B3:D5:BF:10:00/36 Flashnet # Flashnet SRL
70:B3:D5:BF:20:00/36 TwinDeve # TWIN DEVELOPMENT
+70:B3:D5:BF:E0:00/36 AplexTec # Aplex Technology Inc.
70:B3:D5:C0:10:00/36 Smartgua # SmartGuard LLC
70:B3:D5:C0:30:00/36 XaviTech # XAVi Technologies Corp.
70:B3:D5:C0:70:00/36 Areco # ARECO
70:B3:D5:D4:70:00/36 Yotascop # YotaScope Technologies Co., Ltd.
70:B3:D5:D4:80:00/36 Headroom # HEADROOM Broadcast GmbH
70:B3:D5:D4:E0:00/36 Flsmidth # FLSmidth
+70:B3:D5:D5:10:00/36 AzcomTec # Azcom Technology S.r.l.
70:B3:D5:D5:70:00/36 TriumphB # TRIUMPH BOARD a.s.
70:B3:D5:D5:90:00/36 Wyrestor # WyreStorm Technologies Ltd
70:B3:D5:D5:A0:00/36 Wyrestor # WyreStorm Technologies Ltd
70:B3:D5:DF:60:00/36 TiabLimi # Tiab Limited
70:B3:D5:DF:70:00/36 RefecorO # Refecor Oy
70:B3:D5:DF:90:00/36 KoreaPla # Korea Plant Maintenance
+70:B3:D5:E0:20:00/36 YehlJord # YEHL & JORDAN LLC
70:B3:D5:E0:70:00/36 BaaderPl # Baader Planetarium GmbH
70:B3:D5:E0:80:00/36 Olssen # Olssen
70:B3:D5:E0:D0:00/36 SigmaCon # Sigma Connectivity AB
70:B3:D5:E9:50:00/36 Broadsof # BroadSoft Inc
70:B3:D5:E9:90:00/36 Advitron # Advitronics telecom bv
70:B3:D5:E9:A0:00/36 MetaComp # Meta Computing Services, Corp
+70:B3:D5:EA:20:00/36 Transpor # Transportal Solutions Ltd
70:B3:D5:EA:30:00/36 Gridless # Gridless Power Corperation
70:B3:D5:EA:40:00/36 GrupoEpe # Grupo Epelsa S.L.
70:B3:D5:EA:B0:00/36 ApenGrou # APEN GROUP SpA (VAT IT08767740155)
70:B3:D5:F4:C0:00/36 GlobalLi # Global Lightning Protection Services A(S
70:B3:D5:F4:D0:00/36 Honeywel # Honeywell International Inc.
70:B3:D5:F5:40:00/36 Revoluti # Revolution Retail Systems
+70:B3:D5:F5:60:00/36 Virtualh # VirtualHere Pty. Ltd.
70:B3:D5:F5:70:00/36 AplexTec # Aplex Technology Inc.
70:B3:D5:F5:A0:00/36 HamegGmb # HAMEG GmbH
70:B3:D5:F5:B0:00/36 AFMensah # A.F.MENSAH, INC
70:B3:D5:F7:30:00/36 AslHoldi # ASL Holdings
70:B3:D5:F7:80:00/36 ManvishE # Manvish eTech Pvt. Ltd.
70:B3:D5:F7:90:00/36 Firehose # Firehose Labs, Inc.
+70:B3:D5:F7:B0:00/36 KstTechn # KST technology
70:B3:D5:F7:E0:00/36 AlphaEle # Alpha Elettronica s.r.l.
70:B3:D5:F8:50:00/36 Solystic # Solystic
70:B3:D5:F8:C0:00/36 European # EUROPEAN ADVANCED TECHNOLOGIES
70:B3:D5:FA:20:00/36 SarokalT # Sarokal Test Systems Oy
70:B3:D5:FA:40:00/36 Energybo # Energybox Limited
70:B3:D5:FB:00:00/36 Rohde&Sc # Rohde&Schwarz Topex SA
+70:B3:D5:FB:50:00/36 OrangeTr # Orange Tree Technologies Ltd
70:B3:D5:FB:A0:00/36 ApogeeAp # Apogee Applied Research, Inc.
70:B3:D5:FB:B0:00/36 VenaEngi # Vena Engineering Corporation
70:B3:D5:FC:10:00/36 Indicor # InDiCor
74:32:56 Nt-WareS # NT-ware Systemprg GmbH
74:37:2F Tongfang # Tongfang Shenzhen Cloudcomputing Technology Co.,Ltd
74:38:89 AnnaxAnz # ANNAX Anzeigesysteme GmbH
+74:3E:2B RuckusWi # Ruckus Wireless
74:3E:CB Gentrice # Gentrice tech
74:44:01 Netgear # NETGEAR
74:45:8A SamsungE # Samsung Electronics Co.,Ltd
74:72:F2 ChipsipT # Chipsip Technology Co., Ltd.
74:73:36 Microdig # MICRODIGTAL Inc
74:75:48 AmazonTe # Amazon Technologies Inc.
-74:78:18 Servicea # ServiceAssure
+74:78:18 Jurumani # Jurumani Solutions
74:7B:7A Eth # ETH Inc.
74:7D:B6 AliweiCo # Aliwei Communications, Inc
74:7E:1A RedEmbed # Red Embedded Design Limited
74:BA:DB Longconn # Longconn Electornics(shenzhen)Co.,Ltd
74:BE:08 AtekProd # ATEK Products, LLC
74:BF:A1 Hyunteck # HYUNTECK
+74:BF:B7 NusoftCo # Nusoft Corporation
74:C2:46 AmazonTe # Amazon Technologies Inc.
+74:C3:30 Shenzhen # SHENZHEN FAST TECHNOLOGIES CO.,LTD
74:C6:21 Zhejiang # Zhejiang Hite Renewable Energy Co.,LTD
74:C6:3B Azurewav # AzureWave Technology Inc.
74:C9:9A Ericsson # Ericsson AB
78:5C:72 HiosoTec # Hioso Technology Co., Ltd.
78:5F:4C ArgoxInf # Argox Information Co., Ltd.
78:61:7C MitsumiE # MITSUMI ELECTRIC CO.,LTD
+78:64:E6 GreenMot # Green Motive Technology Limited
78:66:AE ZtecInst # ZTEC Instruments, Inc.
78:6A:89 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
78:6C:1C Apple # Apple, Inc.
78:C2:C0:D0:00:00/28 Korf # KORF Inc.
78:C2:C0:E0:00:00/28 Huwomobi # Huwomobility
78:C2:C0:F0:00:00/28 Private # Private
+78:C3:E9 SamsungE # Samsung Electronics Co.,Ltd
78:C4:0E H&DWirel # H&D Wireless
78:C4:AB Shenzhen # Shenzhen Runsil Technology Co.,Ltd
78:C5:E5 TexasIns # Texas Instruments
78:CA:83:A0:00:00/28 Eksagate # Eksagate Elektronik Mühendislik ve Bilgisayar San. Tic. A.Ş.
78:CA:83:B0:00:00/28 Zhejiang # Zhejiang Science Electronic Tech Co., Ltd
78:CA:83:C0:00:00/28 Elanview # Elanview Technology Co.,Ltd
+78:CA:83:D0:00:00/28 HubeiBoy # Hubei Boyuan Zhijia Network Media Co. Ltd.
+78:CA:83:E0:00:00/28 Konecran # Konecranes
78:CB:33 DhcSoftw # DHC Software Co.,Ltd
78:CB:68 DaehapHy # DAEHAP HYPER-TECH
78:CD:8E SmcNetwo # SMC Networks Inc
80:30:DC TexasIns # Texas Instruments
80:34:57 OtLimite # OT Systems Limited
80:37:73 Netgear # NETGEAR
+80:38:96 SharpCor # SHARP Corporation
80:38:BC HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
80:38:FD Leapfrog # LeapFrog Enterprises, Inc.
80:39:E5 PatliteC # PATLITE CORPORATION
80:CF:41 LenovoMo # Lenovo Mobile Communication Technology Ltd.
80:D0:19 EmbedInc # Embed, Inc
80:D0:9B HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
+80:D1:60 Integrat # Integrated Device Technology (Malaysia) Sdn. Bhd.
80:D1:8B Hangzhou # Hangzhou I'converge Technology Co.,Ltd
80:D2:1D Azurewav # AzureWave Technology Inc.
80:D4:33 LzlabsGm # LzLabs GmbH
80:EA:96 Apple # Apple, Inc.
80:EA:CA DialogSe # Dialog Semiconductor Hellas SA
80:EB:77 WistronC # Wistron Corporation
+80:ED:2C Apple # Apple, Inc.
80:EE:73 Shuttle # Shuttle Inc.
80:F2:5E Kyynel # Kyynel
80:F5:03 PacePlc # Pace plc
84:62:23 Shenzhen # Shenzhen Coship Electronics Co., Ltd.
84:62:A6 EurocbPh # EuroCB (Phils), Inc.
84:63:D6 Microsof # Microsoft Corporation
+84:68:3E IntelCor # Intel Corporate
84:6A:ED Wireless # Wireless Tsukamoto.,co.LTD
84:6E:B1 ParkAssi # Park Assist LLC
84:72:07 I&CTechn # I&C Technology
84:85:06 Apple # Apple, Inc.
84:85:0A HellaSon # Hella Sonnen- und Wetterschutztechnik GmbH
84:86:F3 Greenvit # Greenvity Communications
+84:89:AD Apple # Apple, Inc.
84:8D:84 RajantCo # Rajant Corporation
84:8D:C7 CiscoSpv # Cisco SPVTG
84:8E:0C Apple # Apple, Inc.
88:9B:39 SamsungE # Samsung Electronics Co.,Ltd
88:9C:A6 BtbKorea # BTB Korea INC
88:9F:FA HonHaiPr # Hon Hai Precision Ind. Co.,Ltd.
+88:A0:84 Formatio # Formation Data Systems
88:A2:5E JuniperN # Juniper Networks
88:A2:D7 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
88:A3:CC AmatisCo # Amatis Controls
8C:10:D4 Sagemcom # Sagemcom Broadband SAS
8C:11:CB AbusSecu # ABUS Security-Center GmbH & Co. KG
8C:18:D9 Shenzhen # Shenzhen RF Technology Co., Ltd
+8C:1A:BF SamsungE # Samsung Electronics Co.,Ltd
8C:1F:94 RfSurgic # RF Surgical System Inc.
8C:21:0A Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
8C:27:1D Quanthou # QuantHouse
8C:34:FD HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
8C:3A:E3 LgElectr # LG Electronics
8C:3C:07 SkivaTec # Skiva Technologies, Inc.
-8C:3C:4A NakayoTe # NAKAYO TELECOMMUNICATIONS,INC.
+8C:3C:4A NakayoTe # NAKAYO TELECOMMUNICATIONS,INC
8C:41:F2 RdaTechn # RDA Technologies Ltd.
8C:44:35 Shanghai # Shanghai BroadMobi Communication Technology Co., Ltd.
8C:4A:EE GigaTmsI # GIGA TMS INC
8C:BF:A6 SamsungE # Samsung Electronics Co.,Ltd
8C:C1:21 Panasoni # Panasonic Corporation AVC Networks Company
8C:C5:E1 Shenzhen # ShenZhen Konka Telecommunication Technology Co.,Ltd
+8C:C6:61 CurrentP # Current, powered by GE
8C:C7:AA RadinetC # Radinet Communications Inc.
8C:C7:D0 Zhejiang # zhejiang ebang communication co.,ltd
8C:C8:CD SamsungE # Samsung Electronics Co., LTD
90:6F:A9 NanjingP # NANJING PUTIAN TELECOMMUNICATIONS TECHNOLOGY CO.,LTD.
90:70:25 GareaMic # Garea Microsys Co.,Ltd.
90:72:40 Apple # Apple, Inc.
+90:72:82 Sagemcom # Sagemcom Broadband SAS
90:79:90 Benchmar # Benchmark Electronics Romania SRL
90:7A:0A GebrBode # Gebr. Bode GmbH & Co KG
90:7A:28 BeijingM # Beijing Morncloud Information And Technology Co. Ltd.
90:A2:10 UnitedTe # United Telecoms Ltd
90:A2:DA GheoSa # GHEO SA
90:A4:DE WistronN # Wistron Neweb Corp.
+90:A6:2F Naver # NAVER
90:A7:83 JswPacif # JSW PACIFIC CORPORATION
90:A7:C1 PakedgeD # Pakedge Device and Software Inc.
90:AC:3F Brightsi # BrightSign LLC
94:70:D2 WinfirmT # WINFIRM TECHNOLOGY
94:71:AC TctMobil # TCT mobile ltd
94:75:6E QinetiqN # QinetiQ North America
+94:76:B7 SamsungE # Samsung Electronics Co.,Ltd
94:77:2B HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
94:7C:3E Polewall # Polewall Norge AS
94:81:A4 AzurayTe # Azuray Technologies
94:C4:E9 Powerlay # PowerLayer Microsystems HongKong Limited
94:C6:EB NovaElec # NOVA electronics, Inc.
94:C7:AF RayliosT # Raylios Technology
+94:C9:60 Zhongsha # Zhongshan B&T technology.co.,ltd
94:C9:62 TeseqAg # Teseq AG
94:CA:0F Honeywel # Honeywell Analytics
94:CC:B9 ArrisGro # ARRIS Group, Inc.
98:90:96 Dell # Dell Inc.
98:93:CC LgElectr # LG Electronics Inc.
98:94:49 Skyworth # Skyworth Wireless Technology Ltd.
+98:97:D1 Mitrasta # MitraStar Technology Corp.
98:A7:B0 McstZao # MCST ZAO
98:AA:D7 BlueWave # BLUE WAVE NETWORKING CO LTD
98:B0:39 Alcatel- # Alcatel-Lucent
9C:28:EF HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
9C:29:3F Apple # Apple, Inc.
9C:2A:70 HonHaiPr # Hon Hai Precision Ind. Co.,Ltd.
+9C:2A:83 SamsungE # Samsung Electronics Co.,Ltd
9C:30:66 RweEffiz # RWE Effizienz GmbH
9C:31:78 FoshanHu # Foshan Huadian Intelligent Communications Teachnologies Co.,Ltd
9C:31:B6 KuliteSe # Kulite Semiconductor Products Inc
9C:4E:36 IntelCor # Intel Corporate
9C:4E:8E AltLtd # ALT Systems Ltd
9C:4E:BF Boxcast # BoxCast
+9C:4F:DA Apple # Apple, Inc.
9C:53:CD EngicamS # ENGICAM s.r.l.
9C:54:1C Shenzhen # Shenzhen My-power Technology Co.,Ltd
9C:54:CA Zhengzho # Zhengzhou VCOM Science and Technology Co.,Ltd
9C:57:AD CiscoInc # Cisco Systems, Inc
9C:5B:96 NmrCorpo # NMR Corporation
9C:5C:8D FiremaxI # FIREMAX INDÚSTRIA E COMÉRCIO DE PRODUTOS ELETRÔNICOS LTDA
+9C:5C:8E AsustekC # ASUSTek COMPUTER INC.
+9C:5C:F9 SonyMobi # Sony Mobile Communications AB
9C:5D:12 Aerohive # Aerohive Networks Inc.
9C:5D:95 VtcElect # VTC Electronics Corp.
9C:5E:73 CalibreU # Calibre UK LTD
9C:A9:E4 ZteCorpo # zte corporation
9C:AD:97 HonHaiPr # Hon Hai Precision Ind. Co.,Ltd.
9C:AD:EF ObihaiTe # Obihai Technology, Inc.
+9C:AE:D3 SeikoEps # Seiko Epson Corporation
9C:AF:CA CiscoInc # Cisco Systems, Inc
9C:B0:08 Ubiquito # Ubiquitous Computing Technology Corporation
9C:B2:06 Procente # PROCENTEC
A0:C2:DE CostarVi # Costar Video Systems
A0:C3:DE TritonEl # Triton Electronic Systems Ltd.
A0:C5:62 PacePlc # Pace plc
+A0:C5:89 IntelCor # Intel Corporate
A0:C6:EC Shenzhen # ShenZhen ANYK Technology Co.,LTD
+A0:CB:FD SamsungE # Samsung Electronics Co.,Ltd
A0:CE:C8 CeLinkLi # CE LINK LIMITED
A0:CF:5B CiscoInc # Cisco Systems, Inc
A0:D1:2A AxproTec # AXPRO Technology Inc.
A4:12:42 NecPlatf # NEC Platforms, Ltd.
A4:13:4E Luxul # Luxul
A4:15:66 WeiFangG # Wei Fang Goertek Electronics Co.,Ltd
+A4:15:88 ArrisGro # ARRIS Group, Inc.
A4:17:31 HonHaiPr # Hon Hai Precision Ind. Co.,Ltd.
A4:18:75 CiscoInc # Cisco Systems, Inc
A4:1B:C0 FastecIm # Fastec Imaging Corporation
A4:3B:FA:E0:00:00/28 Magstim # The Magstim Company Ltd.
A4:3B:FA:F0:00:00/28 Private # Private
A4:3D:78 Guangdon # GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP.,LTD
+A4:44:D1 Wingtech # Wingtech Group (HongKong）Limited
A4:46:6B EocTechn # EOC Technology
A4:46:FA AmtranVi # AmTRAN Video Corporation
A4:4A:D3 StElectr # ST Electronics(Shanghai) Co.,Ltd
A4:ED:4E ArrisGro # ARRIS Group, Inc.
A4:EE:57 SeikoEps # SEIKO EPSON CORPORATION
A4:EF:52 Telewave # Telewave Co., Ltd.
+A4:F1:E8 Apple # Apple, Inc.
A4:F3:C1 OpenSour # Open Source Robotics Foundation, Inc.
A4:F5:22 ChofuSei # CHOFU SEISAKUSHO CO.,LTD
A4:F7:D0 LanAcces # LAN Accessories Co., Ltd.
AC:5E:8C Utillink # Utillink
AC:60:B6 Ericsson # Ericsson AB
AC:61:23 Drivven # Drivven, Inc.
+AC:61:EA Apple # Apple, Inc.
AC:62:0D JabilCir # Jabil Circuit (Wuxi) Co. LTD
AC:64:62 ZteCorpo # zte corporation
AC:67:06 RuckusWi # Ruckus Wireless
AC:94:03 Envision # Envision Peripherals Inc
AC:9A:22 NxpSemic # NXP Semiconductors
AC:9A:96 LantiqDe # Lantiq Deutschland GmbH
-AC:9B:0A SonyCorp # Sony Corporation
+AC:9B:0A SonyComp # Sony Computer Entertainment Inc.
AC:9B:84 SmakTecn # Smak Tecnologia e Automacao
AC:9C:E4 Alcatel- # Alcatel-Lucent Shanghai Bell Co., Ltd
AC:9E:17 AsustekC # ASUSTek COMPUTER INC.
B4:41:7A Shenzhen # ShenZhen Gongjin Electronics Co.,Ltd
B4:43:0D Broadlin # Broadlink Pty Ltd
B4:47:5E AvayaInc # Avaya Inc
+B4:4B:D2 Apple # Apple, Inc.
B4:4C:C2 NrElectr # NR ELECTRIC CO., LTD
B4:51:F9 NbSoftwa # NB Software
B4:52:53 SeagateT # Seagate Technology
B4:61:FF LumigonA # Lumigon A/S
B4:62:38 Exablox # Exablox
B4:62:93 SamsungE # Samsung Electronics Co.,Ltd
-B4:62:AD RaytestG # raytest GmbH
+B4:62:AD ElysiaGe # Elysia Germany GmbH
B4:66:98 ZealabsS # Zealabs srl
B4:67:E9 QingdaoG # Qingdao GoerTek Technology Co., Ltd.
B4:6D:35 DalianSe # Dalian Seasky Automation Co;Ltd
B4:6D:83 IntelCor # Intel Corporate
B4:73:56 Hangzhou # Hangzhou Treebear Networking Co., Ltd.
+B4:74:43 SamsungE # Samsung Electronics Co.,Ltd
B4:74:9F AskeyCom # ASKEY COMPUTER CORP
B4:75:0E BelkinIn # Belkin International Inc.
B4:79:A7 SamsungE # Samsung Electro Mechanics co., LTD.
B4:82:FE AskeyCom # ASKEY COMPUTER CORP
B4:85:47 AmptownS # Amptown System Company GmbH
B4:89:10 CosterTE # Coster T.E. S.P.A.
+B4:8B:19 Apple # Apple, Inc.
B4:94:4E Weteleco # WeTelecom Co., Ltd.
B4:98:42 ZteCorpo # zte corporation
B4:99:4C TexasIns # Texas Instruments
B8:2A:DC EfrEurop # EFR Europäische Funk-Rundsteuerung GmbH
B8:2C:A0 Honeywel # Honeywell HomMed
B8:30:A8 Road-Tra # Road-Track Telematics Development
+B8:32:41 WuhanTia # Wuhan Tianyu Information Industry Co., Ltd.
B8:36:D8 Videoswi # Videoswitch
B8:38:61 CiscoInc # Cisco Systems, Inc
B8:38:CA KyokkoTs # Kyokko Tsushin System CO.,LTD
B8:9A:ED Oceanser # OceanServer Technology, Inc
B8:9B:C9 SmcNetwo # SMC Networks Inc
B8:9B:E4 AbbPower # ABB Power Systems Power Generation
+B8:A1:75 Roku # Roku, Inc.
B8:A3:86 D-LinkIn # D-Link International
B8:A3:E0 BenruiTe # BenRui Technology Co.,Ltd
B8:A8:AF LogicSPA # Logic S.p.A.
BC:43:77 HangZhou # Hang Zhou Huite Technology Co.,ltd.
BC:44:34 Shenzhen # Shenzhen TINNO Mobile Technology Corp.
BC:44:86 SamsungE # Samsung Electronics Co.,Ltd
+BC:44:B0 Elastifi # Elastifile
BC:46:99 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
BC:47:60 SamsungE # Samsung Electronics Co.,Ltd
BC:4B:79 Sensingt # SensingTek
BC:EA:FA HewlettP # Hewlett Packard
BC:EB:5F FujianBe # Fujian Beifeng Telecom Technology Co., Ltd.
BC:EC:23 Shenzhen # SHENZHEN CHUANGWEI-RGB ELECTRONICS CO.,LTD
+BC:EC:5D Apple # Apple, Inc.
BC:EE:7B AsustekC # ASUSTek COMPUTER INC.
BC:F1:F2 CiscoInc # Cisco Systems, Inc
BC:F2:AF DevoloAg # devolo AG
C0:C1:C0 Cisco-Li # Cisco-Linksys, LLC
C0:C3:B6 Automati # Automatic Systems
C0:C5:20 RuckusWi # Ruckus Wireless
+C0:C5:22 ArrisGro # ARRIS Group, Inc.
C0:C5:69 Shanghai # SHANGHAI LYNUC CNC TECHNOLOGY CO.,LTD
C0:C6:87 CiscoSpv # Cisco SPVTG
C0:C9:46 MitsuyaL # MITSUYA LABORATORIES INC.
C0:CB:38 HonHaiPr # Hon Hai Precision Ind. Co.,Ltd.
+C0:CC:F8 Apple # Apple, Inc.
C0:CE:CD Apple # Apple, Inc.
C0:CF:A3 Creative # Creative Electronics & Software, Inc.
C0:D0:44 Sagemcom # Sagemcom Broadband SAS
C4:DA:7D IviumTec # Ivium Technologies B.V.
C4:E0:32 Ieee1904 # IEEE 1904.1 Working Group
C4:E1:7C U2s # U2S co.
+C4:E5:10 Mechatro # Mechatro, Inc.
C4:E7:BE ScsproLt # SCSpro Co.,Ltd
C4:E9:2F Sciex # AB Sciex
C4:E9:84 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
C8:84:39 SunriseT # Sunrise Technologies
C8:84:47 Beautifu # Beautiful Enterprise Co., Ltd
C8:85:50 Apple # Apple, Inc.
+C8:87:22 Lumenpul # Lumenpulse
C8:87:3B NetOptic # Net Optics
C8:8A:83 Dongguan # Dongguan HuaHong Electronics Co.,Ltd
C8:8B:47 Nolangro # Nolangroup S.P.A con Socio Unico
D8:D1:CB Apple # Apple, Inc.
D8:D2:7C JemaEner # JEMA ENERGY, SA
D8:D3:85 HewlettP # Hewlett Packard
-D8:D4:3C SonyCorp # Sony Corporation
+D8:D4:3C SonyComp # Sony Computer Entertainment Inc.
D8:D5:B9 Rainfore # Rainforest Automation, Inc.
D8:D6:7E GskCncEq # GSK CNC EQUIPMENT CO.,LTD
D8:DA:52 ApatorSA # APATOR S.A.
D8:FC:93 IntelCor # Intel Corporate
D8:FE:8F Idfone # IDFone Co., Ltd.
D8:FE:E3 D-LinkIn # D-Link International
+DC:00:77 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
DC:02:65 Meditech # Meditech Kft
DC:02:8E ZteCorpo # zte corporation
DC:05:2F National # National Products Inc.
DC:3C:F6 AtomicRu # Atomic Rules LLC
DC:3E:51 SolbergA # Solberg & Andersen AS
DC:3E:F8 NokiaCor # Nokia Corporation
+DC:41:5F Apple # Apple, Inc.
DC:44:27 IeeeRegi # IEEE REGISTRATION AUTHORITY - Please see MAM public listing for more information.
DC:44:27:00:00:00/28 Suritel # Suritel
DC:44:27:10:00:00/28 TeslaMot # Tesla Motors, Inc
E0:43:DB Shenzhen # Shenzhen ViewAt Technology Co.,Ltd.
E0:46:9A Netgear # NETGEAR
E0:4B:45 Hi-PElec # Hi-P Electronics Pte Ltd
+E0:4F:BD SichuanT # SICHUAN TIANYI COMHEART TELECOMCO.,LTD
E0:55:3D CiscoMer # Cisco Meraki
E0:55:97 Emergent # Emergent Vision Technologies Inc.
E0:56:F4 Axesnetw # AxesNetwork Solutions inc.
E0:C2:B7 MasimoCo # Masimo Corporation
E0:C3:F3 ZteCorpo # zte corporation
E0:C6:B3 MildefAb # MilDef AB
+E0:C7:67 Apple # Apple, Inc.
E0:C7:9D TexasIns # Texas Instruments
E0:C8:6A Shenzhen # SHENZHEN TW-SCIE Co., Ltd
E0:C9:22 JirehEne # Jireh Energy Tech., Ltd.
E4:58:E7 SamsungE # Samsung Electronics Co.,Ltd
E4:5A:A2 VivoMobi # vivo Mobile Communication Co., Ltd.
E4:5D:52 AvayaInc # Avaya Inc
+E4:5D:75 SamsungE # Samsung Electronics Co.,Ltd
E4:64:49 ArrisGro # ARRIS Group, Inc.
E4:67:BA DanishIn # Danish Interpretation Systems A/S
E4:68:A3 HuaweiTe # HUAWEI TECHNOLOGIES CO.,LTD
E4:97:F0 Shanghai # Shanghai VLC Technologies Ltd. Co.
E4:98:D1 Microsof # Microsoft Mobile Oy
E4:98:D6 Apple # Apple, Inc.
+E4:9A:79 Apple # Apple, Inc.
E4:A3:2F Shanghai # Shanghai Artimen Technology Co., Ltd.
E4:A3:87 ControlS # Control Solutions LLC
E4:A5:EF TronLink # TRON LINK ELECTRONICS CO., LTD.
E8:A4:C1 DeepSeaE # Deep Sea Electronics PLC
E8:AB:FA Shenzhen # Shenzhen Reecam Tech.Ltd.
E8:B1:FC IntelCor # Intel Corporate
+E8:B2:AC Apple # Apple, Inc.
E8:B4:AE Shenzhen # Shenzhen C&D Electronics Co.,Ltd
E8:B4:C8 SamsungE # Samsung Electronics Co.,Ltd
E8:B7:48 CiscoInc # Cisco Systems, Inc
F0:13:C3 Shenzhen # SHENZHEN FENDA TECHNOLOGY CO., LTD
F0:15:A0 Kyungdon # KyungDong One Co., Ltd.
F0:18:2B LgChem # LG Chem
+F0:1B:6C VivoMobi # vivo Mobile Communication Co., Ltd.
F0:1C:13 LgElectr # LG Electronics
F0:1C:2D JuniperN # Juniper Networks
F0:1E:34 OricoTec # ORICO Technologies Co., Ltd
F0:2A:61 WaldoNet # Waldo Networks, Inc.
F0:2F:D8 Bi2-Visi # Bi2-Vision
F0:32:1A Mita-Tek # Mita-Teknik A/S
+F0:34:04 TctMobil # TCT mobile ltd
F0:37:A1 HuikeEle # Huike Electronics (SHENZHEN) CO., LTD.
F0:3A:4B Bloombas # Bloombase, Inc.
F0:3A:55 OmegaEle # Omega Elektronik AS
F4:55:E0 NicewayC # Niceway CNC Technology Co.,Ltd.Hunan Province
F4:57:3E Fiberhom # Fiberhome Telecommunication Technologies Co.,LTD
F4:58:42 BoxxTvLt # Boxx TV Ltd
+F4:5C:89 Apple # Apple, Inc.
F4:5F:69 MatsufuE # Matsufu Electronics distribution Company
F4:5F:D4 CiscoSpv # Cisco SPVTG
F4:5F:F7 DqTechno # DQ Technology Inc.
F4:EA:67 CiscoInc # Cisco Systems, Inc
F4:EB:38 Sagemcom # Sagemcom Broadband SAS
F4:EC:38 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
+F4:ED:5F Shenzhen # SHENZHEN KTC TECHNOLOGY GROUP
F4:EE:14 Shenzhen # SHENZHEN MERCURY COMMUNICATION TECHNOLOGIES CO.,LTD.
F4:F1:5A Apple # Apple, Inc.
F4:F1:E1 Motorola # Motorola Mobility LLC, a Lenovo Company
F8:C9:6C Fiberhom # Fiberhome Telecommunication Tech.Co.,Ltd.
F8:CA:B8 Dell # Dell Inc.
F8:CF:C5 Motorola # Motorola Mobility LLC, a Lenovo Company
-F8:D0:AC SonyCorp # Sony Corporation
+F8:D0:AC SonyComp # Sony Computer Entertainment Inc.
F8:D0:BD SamsungE # Samsung Electronics Co.,Ltd
F8:D1:11 Tp-LinkT # TP-LINK TECHNOLOGIES CO.,LTD.
F8:D3:A9 AxanNetw # AXAN Networks
FC:09:D8 ActeonGr # ACTEON Group
FC:09:F6 Guangdon # GUANGDONG TONZE ELECTRIC CO.,LTD
FC:0A:81 ZebraTec # Zebra Technologies Inc
-FC:0F:E6 SonyCorp # Sony Corporation
+FC:0F:E6 SonyComp # Sony Computer Entertainment Inc.
FC:10:BD ControlS # Control Sistematizado S.A.
FC:11:86 Logic3Pl # Logic3 plc
FC:13:49 GlobalAp # Global Apps Corp.
FC:E9:98 Apple # Apple, Inc.
FC:ED:B9 Arrayent # Arrayent
FC:F1:36 SamsungE # Samsung Electronics Co.,Ltd
-FC:F1:52 SonyCorp # Sony Corporation
+FC:F1:52 SonyComp # Sony Computer Entertainment Inc.
FC:F1:CD Optex-Fa # OPTEX-FA CO.,LTD.
FC:F5:28 ZyxelCom # ZyXEL Communications Corporation
FC:F6:47 Fiberhom # Fiberhome Telecommunication Tech.Co.,Ltd.
avi-nms 4413/tcp # AVI Systems NMS [AVI_Systems] [Dave_Hatz] 2015-09-18
avi-nms-disc 4413/udp # AVI Systems NMS [AVI_Systems] [Dave_Hatz] 2015-09-18
updog 4414/tcp # Updog Monitoring and Status Framework [Egon_Technologies_LLC] [James_Downs] 2015-10-05
+brcd-vr-req 4415/tcp # Brocade Virtual Router Request [Brocade_Communications_Systems] [Nick_Carter] 2015-11-17
+pjj-player 4416/tcp # PJJ Media Player [PJJ_Productions_Inc] [Bruno_Frechette] 2015-11-18
+pjj-player-disc 4416/udp # PJJ Media Player discovery [PJJ_Productions_Inc] [Bruno_Frechette] 2015-11-18
netrockey6 4425/tcp # NetROCKEY6 SMART Plus Service [Feitian_Technologies] [Feitian_Technologies] 2010-09-15
netrockey6 4425/udp # NetROCKEY6 SMART Plus Service [Feitian_Technologies] [Feitian_Technologies] 2010-09-15
beacon-port-2 4426/tcp # SMARTS Beacon Port [Eyal_Yardeni] [Eyal_Yardeni] 2003-11
encrypted-llrp 5085/tcp # EPCglobal Encrypted LLRP [Margaret_Wasserman] [Margaret_Wasserman] 2006-11
encrypted-llrp 5085/udp # EPCglobal Encrypted LLRP [Margaret_Wasserman] [Margaret_Wasserman] 2006-11
aprigo-cs 5086/tcp # Aprigo Collection Service [Ron_Zalkind] [Ron_Zalkind] 2010-05-28
-biotic 5087/tcp # BIOTIC - Binary Internet of Things Interoperable Communication [Clayster_Laboratorios_Chile_S.A.] [Peter_Waher] 2014-06-16
+biotic 5087/tcp # BIOTIC - Binary Internet of Things Interoperable Communication [Waher_Data_AB] [Peter_Waher] 2014-06-16 2015-11-25
car 5090/sctp # Candidate AR
cxtp 5091/sctp # Context Transfer Protocol 2005-07 [RFC4065]
magpie 5092/udp # Magpie Binary [Phil_Maker] [Phil_Maker] 2008-06-18
martalk 7073/tcp # MarTalk protocol [Mahr_GmbH_Göttingen] [Kevin_Bube] 2013-09-02
empowerid 7080/tcp # EmpowerID Communication [Matthew_Whited] [Matthew_Whited] 2008-01-16
empowerid 7080/udp # EmpowerID Communication [Matthew_Whited] [Matthew_Whited] 2008-01-16
+zixi-transport 7088/udp # Zixi live video transport protocol [Zixi] [Igor_Ratner] 2015-11-16
jdp-disc 7095/udp # Java Discovery Protocol [OpenJDK] [Florian_Weimer] 2013-03-12
lazy-ptop 7099/tcp # lazy-ptop [Guy_Keren] [Guy_Keren]
lazy-ptop 7099/udp # lazy-ptop [Guy_Keren] [Guy_Keren]
proremote 8183/tcp # ProRemote [Alex_Lelievre] [Alex_Lelievre] 2009-08-18
itach 8184/tcp # Remote iTach Connection [Barend_Jacobus_van_d] [Barend_Jacobus_van_d] 2010-04-27
itach 8184/udp # Remote iTach Connection [Barend_Jacobus_van_d] [Barend_Jacobus_van_d] 2010-04-27
+gcp-rphy 8190/tcp # Generic control plane for RPHY [CableLabs] [Karthik_Sundaresan] 2015-11-24
limnerpressure 8191/tcp # Limner Pressure [Aaron_Kleinsteiber] [Aaron_Kleinsteiber] 2014-01-16
spytechphone 8192/tcp # SpyTech Phone Service [Bill_Kay] [Bill_Kay] 2006-04
spytechphone 8192/udp # SpyTech Phone Service [Bill_Kay] [Bill_Kay] 2006-04
<translation>Plugins</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation>Tastaturkürzel</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation>Lizenzen</translation>
</message>
<translation>Als Bild speichern</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation>Tabelle als Grafik speichern</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation>PNG Bild (*.png)</translation>
</message>
<translation>Mitschnittdateieigenschaften</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation>Unbekannt</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation>Datei</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation>Name</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation>Länge</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation> (gzip komprimiert)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation>Datenkapselung</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation>Snapshot Länge</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation>Zeit</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation>Erstes Paket</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation>Letztes Paket</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation>Zeitspanne</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation>Mitschnitt</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation>Hardware</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation>Betriebssystem</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation>Applikation</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation>Interfaces</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation>Interface</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation>Verworfene Pakete</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation>Mitschnittfilter</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation>Linktyp</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation>Paketgrößenlimit</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation>keine</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation>%1 Bytes</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation>Statistik</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation>Messwerte</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation>Aufgezeichnet</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation>Angezeigt</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation>Markiert</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation>-</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation>Pakete</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation>Zeitspanne, s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation>Durchsnittliche pps</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation>Durschnittliche Paketgröße, B</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation>Bytes</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation>Durschnittliche Bytes/s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation>Durschnittliche Bits/s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation>Dateikommentar</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation>Paketkommentar</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation><p>Frame %1:</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<translation>Anzeigefiltereintrag</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation>Geben Sie einen Anzeigefilter ein %1</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation>Anzeigefilter anwenden %1 <%2/></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation>Extcap Interface Optionen</translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation>Start</translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation>Diesen Stream verstecken</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation>Drucken</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation>Speichern als</translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation>ASCII</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation>C Arrays</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation>EBCDIC</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation>Hex Dump</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation>UTF-8</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation>YAML</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation>Roh</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation>Paket %1. </translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation>
<numerusform>%Ln <span style="color: %1; background-color:%2">Client</span> Paket,</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation>
<numerusform>%Ln <span style="color: %1; background-color:%2">Server</span> Paket,</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%Ln Runde.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation> Zur Auswahl anklicken.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation>Stream Inhalt speichern als</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation>
[Streamausgabe gekürzt]</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation>Keine Mitschnittdatei.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation>Bitte sicherstellen, dass eine Mitschnittdatei geöffnet ist.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation>Fehler beim folgen des Streams.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation>Mitschnittdatei ungültig.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation>Bitte sicherstellen, dass ein TCP Paket ausgewählt ist.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation>Bitte sicherstellen, dass ein UDP Paket ausgewählt ist.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation>Bitte sicherstellen, dass ein SSL Paket ausgewählt ist.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation>Fehler beim Erstellen eines Filters für diesen Stream.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation>Ein Header der Transport- oder Netzwerkschicht wird benötigt.</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation>
<numerusform>%n Stream.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation>Kann nicht aus der temporären Datei %1 lesen: %2</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation>Zu wenige Daten aus Datei %1 gelesen: erwartet %2, bekommen %3</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation>TCP Stream (%1) folgen</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation>Folge UDP Stream (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation>Folge SSL Stream (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation>Datei geschlossen.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation>Fehler beim Lesen der temporären Datei</translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation>Unbekannt</translation>
</message>
<translation>Klicken um einen Teil des Graphen auszuwählen.</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation>Portable Document Format (*.pdf)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation>Portable Network Graphics (*.png)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Windows Bitmap (*.bmp)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG File Interchange Format (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation>Graph speichern als</translation>
</message>
<translation>Automatische Aktualisierung ist deaktiviert.</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation>nicht gefunden</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation>Dateipfad kopieren</translation>
</message>
<translation>Strg+Umschalttaste+E</translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation>Nach Aktualisierungen suchen</translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation>vor dem Schließen</translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation>Pakete vor dem Zusammenführen speichern?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation>Eine temporäre Mitschnittdatei kann nicht zusammengeführt werden.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation>Vor der Zusammenführung Änderungen in "%1" speichern?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation>Änderungen müssen vor dem Zusammenführen gespeichert werden.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation>Ungültiger Anzeigefilter</translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
<source>The filter expression %1 isn't a valid display filter. (%2).</source>
- <translation>Der Filterausdruck %1 ist kein gültiger Anzeigefilter. (%2).</translation>
+ <translation type="vanished">Der Filterausdruck %1 ist kein gültiger Anzeigefilter. (%2).</translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation>vor dem Importieren eines neuen Mitschnitts</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation>Kann nicht nach "%1" exportieren.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation>Pakete können nicht in die aktuelle Mitschnittdatei exportiert werden.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation>.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation>Sie haben nicht gespeicherte Pakete</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation>Diese gehen verloren wenn sie nicht gespeichert werden.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation>Soll der Mitschnitt gestoppt werden und die aufgezeichneten Pakete gespeichert werden</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation>Sollen die aufgezeichneten Pakete gespeichert werden</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation>?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation>Die aufgezeichneten Pakete gehen verloren wenn sie nicht gespeichert werden.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation>Sollen die Änderungen an der Mitschnittdatei "%1"%2 gespeichert werden?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation>Änderungen gehen verloren, wenn sie nicht gesichert werden.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation>Stoppen und speichern</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation>Stoppen und beenden ohne zu speichern</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation>Ohne speichern beenden</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation>Stoppen und ohne zu speichern weitermachen</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation>Weitermachen &ohne zu speichern</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation>(Dateiname kann nicht auf UTF-8 angewendet werden)</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation>Die Wireshark Netzwerk Analysesoftware</translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation>%1: %2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation>Speichere %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation>Kein Interface ausgewählt</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation>Ungültiger Mitschnittfilter</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation>Menüeinträge löschen</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation>Bitte Warten während Wireshark initalisiert wird</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation>Ausgewählte Paketbytes exportieren</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation>Rohdaten (*.bin *.dat *.raw);; Alle Dateien (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation>Keine Schlüssel</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation>Es sind keine SSL Sitzungsschlüssel zum speichern vorhanden.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation>SSL Sitzungsschlüssel exportieren (%1 key%2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation>SSL Sitzungsschlüssel (*.keys *.txt);; Alle Dateien (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation>Text konnte nicht kopiert werden. Probieren sie einen anderen Eintrag.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation>Verbindungsfilter kann nicht erstellt werden.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation>Kein Filter verfügbar. Probieren Sie einen anderen.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation>Kein Interface ausgewählt</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation>vor dem Starten einer neuen Aufzeichnung</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation>Wikiseite für &1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation><p>Das Wireshark Wiki wird durch die Community gepflegt.</p><p>Die Seite, die aufgerufen werden soll, kann wundervoll, unvollständig, falsch oder gar nicht vorhanden sein.</p><p>Zum Wiki geheni?</p></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation>UDP Multicast Streams</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation>Quelladresse</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation>Quellport</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation>Zieladresse</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation>Zielport</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation>Pakete</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation>Pakete/s</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation>Durchschnittliche Bandbreite (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation>Maximale Bandbreite (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation>Maximaler Burst</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation>Burst Alarme</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation>Maximaler Puffer (B)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation>Puffer Alarme</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation>Burst Messinterval (ms):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation>Burst Alarmschwellwert (Pakete):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation>Puffer Alarmschwellwert (B):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation>Das Burstintervall muss zwischen 1 und 1000 sein. </translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation>Der Burst Alarmschwellwert ist ungültig.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation>Der Puffer Alarmschwellwert ist ungültig. </translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation>%1 Streams, Durchschnittliche Bandbreite: %2bps, Max Bandbreite: %3bps, Max Burst: %4 / %5ms, Max Puffer: %6B</translation>
</message>
<translation>Paket %1</translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation>[%1 geschlossen] </translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation>Zusammenfassung als Text</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation>Links ausrichten</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation>Zentriert ausrichten</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation>Rechts ausrichten</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation>Spalteneigenschaft</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation>Spalte editieren</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation>Größe an Inhalt anpassen</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation>Namen auflösen</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation>Spalte entfernen</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation>[ Kommentartext überschreitet %1. Anhalten der Verarbeitung. ]</translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation>Analysiere</translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation>Sortiere "%1"</translation>
</message>
<translation>Abbrechen</translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation>%1 Einstellungen öffnen</translation>
</message>
<translation>Window Größe (B)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation>Pakete/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation>Bytes/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation>Bits/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation>SUMME(Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation>Anzahl Frames(Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation>Anzahl Felder(Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation>Max(Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation>Min(Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation>Durchschnitt(Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation>LOAD (Y Feld)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation>Linie</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation>Impuls</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation>Balken</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation>gestapelte Balken</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation>Punkte</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation>Rechteck</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation>Raute</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation>Kein</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation>%1 Interval SMA</translation>
</message>
<translation>Priorität</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation>Im Finder anzeigen</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation>Im Ordner anzeigen</translation>
</message>
<translation>Streams abspielen</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation>Ausserhalb der Reihe</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation>Jitter Drops</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation>Falscher Zeitstempel</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation>Eingefügte Stille</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation>%1. "G" um zu Paket %2 zu gehen</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation>Unbekannt</translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation>Association</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation>Endpunkt 1</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation>Endpunkt 2</translation>
</message>
<translation>Abbrechen</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation>Kein gültiger Suchtyp ausgewählt. Bitte melden Sie dies dem Entwickler-Team.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation>Ungültiger Filter.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation>Dieser Filter hat keine Auswirkung.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation>Keine gültige Hex-Zeichenkette.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation>Es wurde kein Text zum suchen angegeben.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation>Kein gültiger Zeichensatz ausgewählt. Bitte melden Sie dies dem Entwickler-Team.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation>Keinen gültigen Suchbereich ausgewählt. Bitte melden Sie dies dem Entwickler-Team.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation>Keine Pakete mit dieser Bytefolge gefunden.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation>Keine Pakete mit dieser Zeichenkette in der Infospalte gefunden.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation>Keine Pakete mit dieser Zeichenkette in der Beschreibung gefunden.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation>Keine Pakete mit dieser Zeichenkette in den Rohdaten gefunden.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation>Keine Pakete entsprechen dem Filter.</translation>
</message>
<translation>Anruf Flow</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation>Speichern als</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation>Keine Daten</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation>Portable Document Format (*.pdf)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation>Portable Network Graphics (*.png)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Windows Bitmap (*.bmp)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG File Interchange Format (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation>ASCII (*.txt)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation>Graph speichern als</translation>
<translation>Flow Sequenzen</translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation>Kein Ton</translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation type="unfinished"></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation type="unfinished"></translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation type="unfinished"></translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%Ln turn.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation type="unfinished">
<numerusform>%Ln stream.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation type="unfinished"></translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
- <source>The filter expression %1 isn't a valid display filter. (%2).</source>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation type="unfinished"></translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation type="unfinished"></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation type="unfinished"></translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation type="unfinished"></translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation type="unfinished"></translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation type="unfinished">
<numerusform>%Ln node</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation type="unfinished">
<numerusform>%Ln item</numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation type="unfinished"></translation>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation type="unfinished"></translation>
</message>
<translation>Modules complémentaires</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation>Licence</translation>
</message>
<translation>Enregistrer en tant qu'image</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation>Image PNG (*.png)</translation>
</message>
<translation>Propriétés du fichier de capture</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation>Inconnu</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation>Fichier</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation>Nom</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation>Longueur</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation>(compressé gzip)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation>Encapsulation</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation>Temps</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation>Premier paquet</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation>Dernier paquet</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation>Temps écoulé</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation>Capture</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation>Hardware</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation>Système d'exploitation</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation>Application</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation>Interfaces</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation>Interface</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation>Paquets rejetés</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation>Filtre de capture</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation>Type de lien</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation>Limite de taille de paquets </translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation>aucun</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation>%1 octets</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation>Statistiques</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation>Mesure</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation>Capturés</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation>Affichés</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation>Marqués</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation>N/A</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation>Paquets</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation>Temps, s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation>Moyenne de pps</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation>Taille des paquets moyenne, O</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation>Octets</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation>Débit moyen (octets/s)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation>Débit moyen (bits/s)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<translation>Filtre d'entrée</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation>Entrer a filtrage d'affichage %1</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation>Appliquer un filtre d'affichage %1 <%2/></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation>Démarrer</translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation>Cacher ce flux</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation>Imprimer</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation>Enregistrer sous</translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation>ASCII</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation>UTF-8</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation>YAML</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation>Paquet %1.</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%n tour.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation>Cliquez pour sélectionner</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation>Pas de fichier de capture.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation>S'il vous plaît assurez-vous que vous avez un fichier de capture ouvert.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation>Erreur pour suivre le flux.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation>Fichier de capture invalide.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation>S'il vous plaît assurez-vous que vous avez un paquet TCP sélectionné.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation>S'il vous plaît assurez-vous que vous avez un paquet UDP sélectionné.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation>S'il vous plaît assurez-vous que vous avez un paquet SSL sélectionné.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation>Erreur pour la création du filtre pour ce flux.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation>Une en-tête de transport ou de la couche de réseau est nécessaire.</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation>
<numerusform>%Ln total flux.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation>Impossible de lire le ficheir temporaire %1: %2</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation>Lecture du fichier temporaire %1: attendu %2, obtenu %3</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation>Suivre le flux TCP (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation>Suivre le flux UDP (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation>Suivre le flux SSL (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation>Fichier fermé.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation>Erreur de lecture du fichier temporaire</translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation>Inconnu</translation>
</message>
<translation>Cliquez pour sélectionner une partie du graphique.</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation>Non trouvé</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation>Sauvegarder les paquets avant la fusion?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation>une capture temporaire ne peut pas etre fusionner.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation>Sauvegarder les changements dans "%1" avant la fusion?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation>Les changements doivent etre sauvegarder avant la fusion de fichier.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation>Filtre d'affichage invalide</translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
<source>The filter expression %1 isn't a valid display filter. (%2).</source>
- <translation>Le filtre %1 n'est pas un filtre d'affichage valide (%2).</translation>
+ <translation type="vanished">Le filtre %1 n'est pas un filtre d'affichage valide (%2).</translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation> avant l'import d'une nouvelle capture</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation>Impossible d'exporter dans "%1".</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation>Vous ne pouvez pas exporter les paquets de la capture en cours.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation>Vous avez des paquets non sauvegardés</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation>Ils seront perdues si vous ne les enregistrez pas.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation>
Voulez-vous arrêter la capture et enregistrer les paquets capturés</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation>Voulez-vous enregistrer les paquets capturés</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation>?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation>Votre capture de paquet sera perdu si vous ne les enregistrez pas.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation>Voulez-vous enregistrer les modifications que vous avez apportées au fichier de capture "%1"%2?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation>Vos changements seront perdus si vous ne les enregistrez pas.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation>Arreter et Sauvegarder</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation>Arreter et Quitter sans Sauvegarder</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation>Quitter sans Sauvegarder</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation>Arreter et Continuer sans Sauvegarder</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation>Continuer sans &Sauvegarder</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation>(Nom du fichier ne peut pas être mappé à l'UTF-8)</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation>L'analyseur de réseau Wireshark</translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation>%1: %2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation>Effacer les fichiers récemment ouverts</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation>Raw data (*.bin *.dat *.raw);;Tous les fichiers (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation>Aucune clés</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation>Il y a aucune clé de Session SSL à sauvegarder.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation>Clé de Session SSL (*.keys *.txt);;Tous les fichiers (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation>Impossible de copier le texte. Essayer un autre item.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation>Aucun filtre disponible. Essayer un autre</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation>Aucune Interface Sélectionnée</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation type="unfinished"></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation>Paquets</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation>Paquets/s</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation type="unfinished"></translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation>Aligner à gauche</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation>Aligner au centre</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation>Aligner à droite</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation>Ajuster la taille au contenu</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation>[ Taille maximum de commentaire dépassé %1 Arrêt !]</translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation type="unfinished"></translation>
</message>
<translation>Annuler</translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation type="unfinished"></translation>
</message>
<translation>Taille de fenetres (b)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation>Paquets/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation>Octets/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation>Bits/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation>SOMME(Champs Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation>COMPTER TRAME(Champs Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation>COMPTER CHAMPS(Champs Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation>MAX(Champs Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation>MIN(CHAMPS Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation>AVG(Champs Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation>LOAD(Champs Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation>Ligne</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation>Impulsion</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation>Bar</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation>Bar Empilé</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation>Point</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation>Carré</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation>Diamant</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation>Aucun</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation>%1 intervale SMA</translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation type="unfinished"></translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation>Inconnu</translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation>Association</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation>Terminal 1</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation>Terminal 2</translation>
</message>
<translation>Annuler</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation>Aucun type de recherche valide sélectionné. Merci de le reporter à l'équipe de développement.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation>Filtre Invalide.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation>Ce filtre ne teste rien.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation>Ce n'est pas un filtre hexa valide.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation>Vous n'avez pas spécifié de texte à rechercher.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation>Aucun caractères valide sélectionné. Merci de le reporter à l'équipe de développement.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation>Aucune zone de recherche valide sélectionné. Merci de le reporter à l'équipe de développement.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation>Aucun paquet contient ces octets.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation>Aucun paquet contient cette chaine dans la colonne Info.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation>Aucun paquet contient cette chaine de caracetere dans les paquets analysés.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation>Aucun paquet contient cette chaine dans les paquets convertis.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation>Aucun paquet corresponds a ce filtre.</translation>
</message>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation>Enregistrer sous</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation>
<numerusform>%n noeud</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation>
<numerusform>%n item</numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation type="unfinished"></translation>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation type="unfinished"></translation>
</message>
<translation>Plugin</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation>Scorciatoie da tastiera</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation>Licenza</translation>
</message>
<translation>Salva come immagine</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation>Salva immagine tabella</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation>Immagine PNG (*.png)</translation>
</message>
<translation>Proprietà del file di cattura</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation>Sconosciuto</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation>File</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation>Nome</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation>Lunghezza</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation> (compresso con gzip)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation>Formato</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation>Incapsulamento</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation>Lunghezza istantanea</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation>Tempo</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation>Primo pacchetto</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation>Ultimo pacchetto</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation>Trascorso</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation>Cattura</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation>Hardware</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation>OS</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation>Applicazione</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation>Interfacce</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation>Interfaccia</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation>Pacchetti persi</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation>Filtro di cattura</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation>Tipo di link</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation>Dimensione limite del pacchetto</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation>nessuno</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation>%1 byte</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation>Statistiche</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation>Misure</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation>Catturati</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation>Visualizzati</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation>Marcati</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation>N/D</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation>Pacchetti</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation>Tempo, s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation>PPS medi</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation>Dimensione media dei pacchetti, B</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation>Byte</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation>Byte/s medi</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation>Bit/s medi</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation>Commento file</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation>Commenti pacchetto</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation><p>Frame %1: </translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<translation>Mostra la voce del filtro</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation>Inserisci un filtro di visualizzazione %1</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation>Applica un filtro di visualizzazione %1 <%2/></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation>Opzioni interfaccia Extcap</translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation>Avvia</translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation>Nascondi questo flusso</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation>Stampa</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation>Salva come</translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation>ASCII</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation>Array C</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation>EBCDIC</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation>Dump Esadecimale</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation>UTF-8</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation>YAML</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation>Grezzo</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation>Pacchetto %1. </translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation>
<numerusform>%n pacchetto <span style="color: %1; background-color:%2">client</span>, </numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation>
<numerusform>%n pacchetto <span style="color: %1; background-color:%2">server</span>, </numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%n turno.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation> Fai clic per selezionare.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation>Salva il contenuto del flusso come</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation>[Flusso di output troncato]</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation>Nessun file di cattura.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation>Assicurati di avere un file di cattura aperto.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation>Errore seguendo il flusso.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation>File di cattura non valido.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation>Assicurati di aver selezionato un pacchetto TCP.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation>Assicurati di aver selezionato un pacchetto UDP.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation>Assicurati di aver selezionato un pacchetto SSL.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation>Errore nella creazione di un filtro per questo flusso.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation>È necessaria un'intestazione di livello trasporto o rete.</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation>
<numerusform>%n flusso.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation>Non riesco a leggere dal file temporaneo %1: %2</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation>Troppo pochi byte letti dal file temporaneo %1: attesi %2, ottenuti %3</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation>Segui il flusso TCP (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation>Segui il flusso UDP (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation>Segui il flusso SSL (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation>File chiuso.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation>Errore durante la lettura del file temporaneo</translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation>Sconosciuto</translation>
</message>
<translation>Fai clic per selezionare una porzione del grafico.</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation>Portable Document Format (*.pdf)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation>Portable Network Graphics (*.png)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Windows Bitmap (*.bmp)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG File Interchange Format (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation>Salva i grafici come</translation>
</message>
<translation>Hai disabilitato gli aggiornamenti automatici.</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation>non trovato</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation>Copia percorso del file</translation>
</message>
<translation>Ctrl+Maiusc+E</translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation>Verifica aggiornamenti</translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation>prima di uscire</translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation>Salvare i pacchetti prima di unire?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation>Un file di cattura temporaneo non può essere unito.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation>Salvare le modifiche a "%1" prima di unire?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation>Le modifiche devono essere salvate prima di unire.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation>Filtro di visualizzazione non valido</translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
<source>The filter expression %1 isn't a valid display filter. (%2).</source>
- <translation>L'espressione %1 non è un filtro di visualizzazione valido (%2).</translation>
+ <translation type="vanished">L'espressione %1 non è un filtro di visualizzazione valido (%2).</translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation>prima di importare una nuova cattura</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation>Impossibile esportare su "%1".</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation>Non puoi esportare pacchetti sul file di cattura attuale.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation>.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation>Ci sono pacchetti non salvati</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation>Saranno persi se non li salvi.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation>Vuoi interrompere la cattura e salvare i pacchetti catturati</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation>Vuoi salvare i pacchetti catturati </translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation>?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation>I pacchetti catturati saranno persi se non li salvi.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation>Vuoi salvare le modifiche che hai apportato al file di cattura "%1"%2?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation>Le modifiche saranno perse se non le salvi.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation>Ferma e salva</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation>Ferma ed esci senza salvare</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation>Esci senza salvare</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation>Ferma e continua senza salvare</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation>Continua &senza salvare</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation>(Il nome del file non può essere associato in UTF-8)</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation>Wireshark l'analizzatore di rete</translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation>%1: %2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation>Salvataggio di %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation>Nessuna interfaccia selezionata</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation>Filtro di cattura invalido</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation>Pulisci menu</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation>Attendi l'inizializzazione di Wireshark</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation>Esporta i byte del pacchetto selezionato</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation>Dati grezzi (*.bin *.dat *.raw);;Tutti i file (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation>Nessuna chiave</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation>Non ci sono chiavi di sessione SSL da salvare.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation>Esporta le chiavi di sessione SSL (%1 chiave%2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation>Chiavi di sessione SSL (*.keys *.txt);;Any File (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation>Non riesco a copiare il testo. Prova un'altra voce.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation>Impossibile creare il filtro di conversazione.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation>Nessun filtro disponibile. Provane un altro </translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation>Nessuna interfaccia selezionata</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation>prima di iniziare una nuova cattura</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation>Pagina wiki per %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation><p>Il Wiki di Wireshark è gestito dalla comunità.</p><p>La pagina che stai per caricare potrebbe essere perfetta, incompleta, errata o inesistente.</p><p>Vuoi proseguire?</p></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation>Flussi multicast UDP</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation>Indirizzo sorgente</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation>Porta sorgente</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation>Indirizzo destinazione</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation>Porta destinazione</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation>Pacchetti</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation>Pacchetti/s</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation>Banda media (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation>Banda max (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation>Burst max</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation>Allarmi burst</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation>Buffer max (B)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation>Allarmi buffer</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation>Intervallo di misurazione burst (ms):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation>Soglia di allarme burst (pacchetti):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation>Soglia di allarme del buffer (B):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished">Velocità di svuotamento del flusso (Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished">Velocità di svuotamento totale (Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation>L'intervallo di burst deve essere compreso tra 1 e 1000.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation>La soglia di allarme di burst non è valida.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation>La soglia di allarme di buffer non è valida.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation>La velocità di svuotamento del flusso dovrebbe essere compresa tra 1 e 10000000.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation>La velocità di svuotamento totale dovrebbe essere compresa tra 1 e 10000000.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation>%1 flussi, banda media: %2bps, banda max: %3bps, burst max: %4 / %5ms, buffer max: %6B</translation>
</message>
<translation>Pacchetto %1</translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation> [%1 chiuso]</translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation>Riepilogo come testo</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation>Allinea a sinistra</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation>Allinea al centro</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation>Allinea a destra</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation>Preferenze delle colonne</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation>Modifica colonna</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation>Ridimensiona come il contenuto</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation>Risolvi i nomi</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation>Rimuovi questa colonna</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation>[ Il testo del commento supera %1. Interruzione. ]</translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation>Decodifica</translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation>Ordinamento di "%1"</translation>
</message>
<translation>Annulla</translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation>Apri le preferenze di %1</translation>
</message>
<translation>Dimensione della finestra (B)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation>Pacchetti/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation>Byte/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation>Bit/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation>SOMMA (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation>CONTA FRAME (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation>CONTA CAMPI (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation>MAX (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation>MIN (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation>MED (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation>CARICO (Campo Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation>Linea</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation>Impulso</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation>Barra</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation>Barre impilate</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation>Punto</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation>Quadrato</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation>Diamante</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation>Nessuno</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation>%1 intervallo SMA</translation>
</message>
<translation>Priorità</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation>Mostra in Finder</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation>Mostra nella cartella</translation>
</message>
<translation>Riproduci flussi</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation>Fuori sequenza</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation>Scarti jitter</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation>Marche temporali errate</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation>Silenzio inserito</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation>%1. Premi "G" per andare al pacchetto %2</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation>Sconosciuto</translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation>Associazione</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation>Terminatore 1</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation>Terminatore 2</translation>
</message>
<translation>Annulla</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation>Nessun tipo di ricerca valida selezionata. Segnala il problema alla squadra di sviluppo.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation>Filtro non valido.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation>Il filtro non verifica niente.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation>Questa non è una stringa esadecimale valida.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation>Non hai specificato alcun testo da ricercare.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation>Nessun gruppo di caratteri valido selezionato. Segnala il problema alla squadra di sviluppo.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation>Nessuna area di ricerca valida selezionata. Segnala il problema alla squadra di sviluppo.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation>Nessun pacchetto contiene questi byte.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation>Nessun pacchetto contiene questa stringa nella colonna delle informazioni.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation>Nessun pacchetto contiene questa stringa nella sua visualizzazione decodificata.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation>Nessun pacchetto contiene questa stringa nei suoi dati convertiti.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation>Nessun pacchetto corrisponde a questo filtro.</translation>
</message>
<translation>Flusso della chiamata</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation>Salva come</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation>Nessun dato</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation>
<numerusform>%n nodo</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation>
<numerusform>%n voce</numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation>Portable Document Format (*.pdf)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation>Portable Network Graphics (*.png)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Windows Bitmap (*.bmp)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG File Interchange Format (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation>ASCII (*.txt)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation>Salva grafico come</translation>
<translation>Sequenza del flusso</translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation>Nessun audio</translation>
</message>
<translation>プラグイン</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation>キーボード ショートカット</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation>ライセンス</translation>
</message>
<translation>画像として保存</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation>表の画像として保存</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation>PNG画像 (*.png)</translation>
</message>
<translation>キャプチャファイルプロパティ</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation>不明</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation>ファイル</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation>名前</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation>長さ</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation> (gzip 圧縮)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation>フォーマット</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation>カプセル化</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation>スナップショット長</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation>時間</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation>最初のパケット</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation>最後のパケット</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation>経過</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation>キャプチャ</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation>ハードウエア</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation>OS</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation>アプリケーション</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation>インタフェース</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation>インタフェース</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation>ドロップしたパケット</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation>キャプチャフィルタ</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation>リンク種別</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation>パケットサイズ限界</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation>なし</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation>%1 バイト</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation>統計</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation>メジャー</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation>キャプチャされたパケット</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation>表示</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation>マークされた</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation>N/A</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation>パケット</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation>時間間隔, s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation>平均 パケット毎秒</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation>平均パケットサイズ, バイト</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation>バイト</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation>平均バイト毎秒</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation>平均ビット毎秒</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation>ファイルコメント</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation>パケットコメント</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation><p>フレーム %1: </translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<message>
<location filename="display_filter_edit.cpp" line="105"/>
<source>Display filter entry</source>
- <translation>表示フィルタ入力</translation>
+ <translation>表示フィルタ入力</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation>表示フィルタを入力します %1</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation>表示フィルタを適用します %1 <%2/></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation>Extcapインタフェースオプション</translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation>開始</translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation>このストリームを隠す</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation>印刷</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation>として保存</translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation>ASCII形式</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation>C言語配列</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation>EBCDIC形式</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation>16進数ダンプ</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation>UTF-8形式</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation>YAML形式</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation>列</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation>パケット %1</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation type="unfinished">
<numerusform></numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%Ln ターン.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation>クリックして選択</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation>としてストリームコンテントを保存</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation>[ストリーム出力が省略されました]</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation>キャプチャファイルがありません</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation>キャプチャファイルが開かれているか確認してください</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation>ストリーム分析のエラー</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation>キャプチャファイルが無効です</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation>TCPパケットを選んだか確認してください</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation>UDPパケットを選んだか確認してください</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation>SSLパケットを選んだか確認してください</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation>このストリームのフィルタ作成エラー</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation>トランスポート層かネットワーク層のヘッダーが必要です。</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation>
<numerusform>%Ln 全ストリーム</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation>一時ファイルから読み込めませんでした。 %1: %2</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation>一時ファイルから一部を読み込みました。 %1: 予想 %2, 実際 %3</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation>TCPストリームを追跡 (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation>UDPストリームを追跡 (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation>SSLストリームを追跡 (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation>ファイルを閉じました。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation>一時ファイル読み込みエラー</translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation>不明</translation>
</message>
<translation>クリックしてグラフの割合を選びます</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation>PDF形式 (*.pdf)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation>PNG形式 (*.png)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>ビットマップ形式 (*.bmp)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG形式 (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation>としてグラフを保存</translation>
</message>
<translation>自動アップデートを無効にしました。</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation>見つかりません</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation>ファイルパスをコピー</translation>
</message>
<translation>Ctrl+Shift+E</translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation>更新を確認...</translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation>終了前</translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation>結合する前にパケットを保存しますか？</translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation>一時的なキャプチャファイルは結合することができません</translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation>結合する前に変更を保存しますか？</translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation>ファイルを結合する前に変更を保存する必要があります</translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation>無効な表示フィルタ</translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
<source>The filter expression %1 isn't a valid display filter. (%2).</source>
- <translation>%1 フィルターの書式は有効な表示フィルタではありません (%2)</translation>
+ <translation type="vanished">%1 フィルターの書式は有効な表示フィルタではありません (%2)</translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation>新しいキャプチャファイルのインポートする前</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation>"%1" エクスポートすることができません。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation>現在のキャプチャファイルへパケットをエクスポートすることはできません。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation>.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation>保存していないパケットがあります。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation>保存しない場合、これらは失われます。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation>キャプチャは停止してキャプチャされたパケットを保存しますか</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation>キャプチャされたパケットを保存したいですか</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation>？</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation>保存しない場合キャプチャしたパケットは失われます</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation>キャプチャスタイルに行った変更を保存しますか</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation>保存しない場合変更は失われます</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation>停止して保存</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation>停止して保存しないで終了</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation>保存しないで終了</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation>停止して保存しないで続ける</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation>保存しないで続ける</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation>ファイル名をUTF-8形式に割り当てできません</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation>ワイヤーシャーク ネットワークアナライザ</translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation>%1: %2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation>保存中 %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation>インタフェースが選択されていません</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation>無効なキャプチャフィルタ</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation>メニューをクリア</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation>Wiresharkが初期化する間お待ちください</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation>選択したパケットデータ部をエキスポート</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation>Raw形式 (*.bin *.dat *.raw);;すべてのファイル (*.*</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation>キーはありません</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation>保存する SSLセッション鍵はありません</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation>SSLセッション鍵をエキスポート (%1 鍵%2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation>SSLセッション鍵 (*.keys *.txt);;すべてのファイル (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation>テキストコピーできません 別に試してください</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation>会話フィルタを作成できません</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation>フィルタが利用できません 別に試してください</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation>インターフェースが選択されていません</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation>新規キャプチャを開始する前に</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation>%1 の Wikiページ</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation><p>ワイヤーシャークWikiはコミュニティによって運営されています。</p><p>いま見ているページはすばらしかったり、不完全だったり、間違っていたり、存在しないかもしれません。</p><p>Wikiに移動しますか？</p></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation>UDPマルチキャストストリーム</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation>送信元アドレス</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation>送信元ポート</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation>宛先アドレス</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation>宛先ポート</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation>パケット</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation>パケット/秒</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation>平均帯域（ビット毎秒）</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation>最大帯域(ビット毎秒)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation>最大バースト</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation>バースト警告</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation>最大バッファ(B)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation>バッファ 警告</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation>バースト計測間隔 (ms):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation>バースト警告閾値(パケット):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation>バッファ警告閾値(B)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished">ストリーム空き速度(Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished">合計空き速度(Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation>バースト間隔は1から1000の間でなくてはいけません。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation>バースト警告閾値が有効ではありません。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation>バッファ警告閾値が有効ではありません。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation>ストリーム空き速度は1から10000000の間でなくてはいけません。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation>合計空き速度は1から10000000の間であるべきです</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation>%1 ストリーム, 平均帯域: %2bps, 最大帯域: %3bps, 最大バースト: %4 / %5ms, 最大バッファ: %6B</translation>
</message>
<translation>パケット %1</translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation>[%1 closed] </translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation>テキストとしての概要</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation>左揃え</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation>中央揃え</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation>右揃え</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation>列の設定</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation>列の編集</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation>内容にあわせて列幅を揃える</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation>名前を解決</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation>この列を削除</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation>[ コメントテキスト %1 停止中 ]</translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation>解析中</translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation>ソート中 "%1"</translation>
</message>
<translation>キャンセル</translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation>%1 設定を開く</translation>
</message>
<translation>ウインドウサイズ（バイト)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation>パケット/秒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation>バイト/秒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation>ビット/秒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation>SUM(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation>COUNT FRAMES(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation>COUNT FIELDS(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation>MAX(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation>MIN(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation>AVG(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation>LOAD(Y フィールド)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation>線</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation>点線</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation>棒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation>積み棒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation>点</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation>四角</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation>菱形</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation>なし</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation>%1 インターバル SMA</translation>
</message>
<translation>優先度</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation>ファインダーで表示</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation>フォルダで表示</translation>
</message>
<translation>ストリームを再生</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation>順番をはずれている</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation>ジッタが落ちている</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation>タイムスタンプが誤っている</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation>無音が挿入されている</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation>%1. "G" を押してパケットへ移動 %2</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation>不明</translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation>アソシエーション</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation>終端 1</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation>終端 2</translation>
</message>
<translation>キャンセル</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation>有効な検索形式が選択されていません どうか開発チームにこれを報告してください</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation>無効なフィルタ</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation>そのフィルタは何も検査しません</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation>有効な１６進数文字列ではありません</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation>検索するためのテキストがありませんでした</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation>有効な文字セットが選択されていません。どうか開発チームにこれを報告してください</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation>有効な検索範囲が選択されていません。どうか開発チームにこれを報告してください</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation>そのようなバイトを含むパケットはありませんでした</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation>情報列にその文字列を含むパケットはありませんでした</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation>解析された表示にその文字列を含むパケットはありませんでした</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation>コンバートされたデータにその文字列を含むパケットはありませんでした</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation>フィルタに一致するパケットはありませんでした</translation>
</message>
<translation>Callフロー</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation>...として保存</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation>データなし</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation>
<numerusform>%Ln ノード</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation>
<numerusform>%Ln アイテム</numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation>PDF形式 (*.pdf)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation>PNG形式 (*.png)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>ビットマップ形式 (*.bmp)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG形式 (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation>アスキーテキスト形式 (*.txt)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation>...としてグラフを保存</translation>
<translation>フロー順序</translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation>オーディオなし</translation>
</message>
<translation>Wtyczki</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation>Skróty klawiaturowe</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation>Licencja</translation>
</message>
<translation>Zapisz jako obraz</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation>Zapisz jako obraz</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation>Obraz PNG (*.png)</translation>
</message>
<translation>Szczegóły pliku przechwytywania</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation>Nieznane</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation>Plik</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation>Nazwa</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation>Rozmiar</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation> (skompresowany gzip)</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation>Enkapsulacja</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation>Długość wycinka</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation>Czas</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation>Pierwszy pakiet</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation>Ostatni pakiet</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation>Minęło</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation>Przechwytuj</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation>Sprzęt</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation>OS</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation>Aplikacja</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation>Interfejsy</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation>Interfejs</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation>Porzucone pakiety</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation>Filtr przechwytywania</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation>Typ łącza</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation>Limit rozmiaru pakietu</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation>brak</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation>%1 bajtów</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation>Statystyki</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation>Pomiary</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation>Przechwycone</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation>Wyświetlane</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation>Zaznaczone</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation>N/A</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation>Pakiety</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation>Okres czasu, s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation>Średni pps</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation>Średni rozmiar pakietu, B</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation>Bajty</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation>Średnio bajtów/s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation>Średnio bitów/s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation>Komentarz pliku</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation>Komentarze pakietu</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation><p>Ramka %1: </translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<translation>Wpis filtru wyświetlania</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation>Wpisz filtr wyświetlania %1</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation>Zastosuj filtr wyświetlania %1 <%2/></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation>Opcje interfejsów Extcap</translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation>Start</translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation>Ukryj ten strumień</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation>Drukuj</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation>Zapisz jako</translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation>ASCII</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation>Tablica w języku C</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation>EBCDIC</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation>Szesnastkowo</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation>UTF-8</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation>YAML</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation>Dane surowe</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation>Pakiet %1. </translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation>
<numerusform>%Ln pakiet <span style="color: %1; background-color:%2">klienta</span>, </numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation>
<numerusform>%Ln pakiet <span style="color: %1; background-color:%2">serwera</span>,</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%Ln prób.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation>Kliknij by wybrać.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation>Zapisz zawartość strumiania jako</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation>Obcięto dane strumiania</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation>Brak pliku przechwytywania.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation>Proszę sprawdzić czy masz otwarty plik przechwytywania.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation>Błąd śledzenia strumienia.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation>Nieprawidłowy plik przechwytywania.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation>Proszę sprawdzić czy zaznaczono pakiet TCP.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation>Proszę sprawdzić czy zaznaczono pakiet UDP.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation>Proszę sprawdzić czy zaznaczono pakiet SSL.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation>Błąd tworzenia filtru dla tego strumienia.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation>Potrzebna jest warta trasportowa lub sieciowa nagłówka.</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation>
<numerusform>%Ln wszystkich strumieni.</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation>Nie można odczytać pliku tymczasowego %1: %2</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation>Odczytano za mało danych z tymczasowego pliku %1: oczekiwano %2, jest %3</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation>Śledź strumień TCP (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation>Śledź strumień UDP (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation>Śledź strumień SSL (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation>Plik zamknięty.</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation>Błąd odczytu pliku tymczasowego</translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation>Nieznany</translation>
</message>
<translation>Kliknij by wybrać obszar wykresu.</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation>Dokument PDF (*.pdf)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation>Obraz PNG (*.png)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Bitmapa Windows (*.bmp)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>Obraz JPEG (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation>Zapisz wykres jako</translation>
</message>
<translation>Automatyczne aktualizacje są wyłączone.</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation>nie znaleziono</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation>Kopiuj ścieżkę</translation>
</message>
<translation>Ctrl+Shift+E</translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation>Sprawdź aktualizacje</translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation>przed wyjściem</translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation>Zapisać pakiety przed scaleniem?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation>Tymczasowy plik przechwytywania nie może zostać scalony.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation>Zapisać zmiany w "%1" przed scaleniem?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation>Zmiany muszą być zapisane przed próbą scalenia plików.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation>Niepoprawny filtr</translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
<source>The filter expression %1 isn't a valid display filter. (%2).</source>
- <translation>Postać filtru %1 nie jest poprawna. (%2).</translation>
+ <translation type="vanished">Postać filtru %1 nie jest poprawna. (%2).</translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation>przed zaimportowaniem nowego pliku przechwytywania</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation>Nie można wyeksportować do "%1".</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation>Nie można wyeksportować pakietów do aktualnego pliku.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation>.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation>Masz niezapisane pakiety</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation>Będą utracone jeśli ich nie zapiszesz.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation>Czy chcesz zatrzymać przechwytywanie i zapisać przechwycone pakiety</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation>Czy chcesz zapisać przechwycone pakiety</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation>?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation>Twoje przechwycone pakiety zostaną utracone jeśli nie zapiszesz ich.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation>Czy chcesz zapisać zmiany, które zrobiłeś do pliku przechytywania "%1"%2?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation>Twoje zmiany zostaną utracone jeśli nie zapiszesz ich.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation>Zatrzymaj i zapisz</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation>Zatrzymaj i zamknij bez zapisywania</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation>Wyjdź bez zapisywania</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation>Zatrzymaj i Kontynuuj bez zapisywania</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation>Kontynuuj bez zapisywania</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation>(Nazwa pliku nie może być przekonwertowana do formatu UTF-8)</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation>Analizator Wireshark</translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation>%1: %2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation>Zapisywanie %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation>Nie wybrano interfejsu</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation>Niepoprawny filtr przechwytywania</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation>Wyczyść Menu</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation>Proszę czekać, trwa uruchamianie Wiresharka</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation>Eksportuj zaznaczony bajty pakietu</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation>Surowe dane (*.bin *.dat *.raw);;Dowolny plik (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation>Brak kluczy</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation>Nie ma żadnych kluczy sesji SSL do zapisu.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation>Eksportuj klucze sesji SSL (%1 klucz%2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation>Klucze sesji SSL (*.keys *.txt);; Dowolny plik (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation>Nie można skopiować tekstu. Spróbuj inną pozycję.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation>Nie można stworzyć filtru konwersacji.</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation>Brak dostępnych filtrów. Spróbuj ponownie</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation>Nie wybrano interfejsu</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation>przed wystartowaniem nowego przechwytywania</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation>Strona Wiki dla %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation><p>Strona Wiki Wiresharka jest zarządzania przez społeczność.</p><p>Strona którą chcesz wczytać może być wspaniała, niekompletna, błędna lub nie istnieć.</p><p>Kontynuować wczytywanie strony Wiki?</p></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation>Strumienie rozsyłania grupowego UDP</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation>Adres źródłowy</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation>Port źródłowy</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation>Adres docelowy</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation>Port docelowy</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation>Pakiety</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation>Pakietów/s</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation>Średni BW (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation>Max BW (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation>Max Impuls</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation>Alarmy Impulsu</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation>Max Bufor (B)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation>Alarmy Bufora</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation>Interwał pomiaru impulsu (ms):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation>Próg alarmu impulsu (pakiety):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation>Próg alarmu bufora (B):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished">Prędkość pustki strumienia (Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished">Całkowita prędkość pustki (Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation>Interwał impulsu musi być pomiędzy 1 a 1000.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation>Próg alarmu impulsu nie jest poprawny.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation>Próg alarmu bufora nie jest poprawny.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation>Prędkość pustki strumienia powinna być pomiędzy 1 a 10000000.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation>Całkowita prędkość pustki powinna być pomiędzy 1 a 10000000.</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation>%1 strumieni, średni transfer: %2bps, max transfer: %3bps, max impuls: %4 / %5ms, max bufor: %6B</translation>
</message>
<translation>Pakiet %1</translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation>[%1 zamknięty]</translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation>Podsumowanie jako tekst</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation>Wyrównaj do lewej</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation>Wyrównaj do środka</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation>Wyrównaj do prawej</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation>Ustawienia kolumny</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation>Edytuj kolumnę</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation>Dopasuj szerokość do zawartości</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation>Rozwiązuj nazwy</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation>Usuń tę kolumnę</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation>[ Długość komentarza przekracza %1. Wstrzymano. ]</translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation>Analizowanie</translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation>Sortowanie "%1"</translation>
</message>
<translation>Anuluj</translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation>Otwiera ustawienia %1</translation>
</message>
<translation>Rozmiar okna (B)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation>Pakiety/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation>Bajty/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation>Bity/s</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation>SUMA(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation>LICZ RAMKI(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation>LICZ POLA(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation>MAX(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation>MIN(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation>ŚREDNIA(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation>LOAD(pole Y)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation>Linia</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation>Impuls</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation>Pasek</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation>Ułożony pasek</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation>Kropka</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation>Kwadrat</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation>Diament</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation>Brak</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation>%1 interwał SMA</translation>
</message>
<translation>Priorytet</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation>Otwórz w wyszukiwajce</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation>Otwórz w folderze</translation>
</message>
<translation>Odtwarzaj Strumienie</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation>Poza kolejnością</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation>Porzucenia Jitter</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation>Błędny znacznik czasu</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation>Wstawiono ciszę</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation>%1. Naciśnij "G" przejść do pakietu %2</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation>Nieznany</translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation>Asocjacja</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation>Punkt krańcowy 1</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation>Punkt krańcowy 2</translation>
</message>
<translation>Anuluj</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation>Nie wybrano poprawnego typu wyszukiwania. Proszę to zgłosić programistom Wiresharka.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation>Błądny filtr.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation>Ten filtr nie sprawdza niczego.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation>To niejest prawidłowy tekst w formacie szesnastkowym.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation>Nie wpisano tekstu do wyszukania.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation>Nie wybrano poprawnego kodowania znaków. Proszę to zgłosić programistom Wiresharka.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation>Nie wybrano poprawnego obszaru wyszukiwania. Proszę to zgłosić programistom Wiresharka.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation>Żaden pakiet nie zwiera tych bajów.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation>Żaden pakiet nie zawiera tego ciągu znaków w kolumnie Info.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation>Żaden pakiet nie zawiera tego ciągu znaków w zdekodowanych polach.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation>Żaden pakiet nie zawierająca tego ciągu znaków w swoich danych.</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation>Żaden pakiet nie spełnia wymogów tego filtru.</translation>
</message>
<translation>Przepływy połączeń</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation>Zapisz jako</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation>Brak danych</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation>
<numerusform>%Ln węzeł</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation>
<numerusform>%Ln obiekt</numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation>Dokument PDF (*.pdf)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation>Obraz PNG (*.png)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Bitmapa Windows (*.bmp)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>Obraz JPEG (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation>ASCII (*.txt)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation>Zapisz wykres jako</translation>
<translation>Przepływ sekwencyjny</translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation>Brak Audio</translation>
</message>
<translation>插件</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="219"/>
+ <location filename="about_dialog.ui" line="210"/>
<source>Keyboard Shortcuts</source>
<translation>键盘快捷键</translation>
</message>
<message>
- <location filename="about_dialog.ui" line="236"/>
+ <location filename="about_dialog.ui" line="227"/>
<source>License</source>
<translation>许可</translation>
</message>
<translation>另存为图像</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="361"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="306"/>
<source>Save Table Image</source>
<translation>保存表格图像</translation>
</message>
<message>
- <location filename="bluetooth_att_server_attributes_dialog.cpp" line="363"/>
+ <location filename="bluetooth_att_server_attributes_dialog.cpp" line="308"/>
<source>PNG Image (*.png)</source>
<translation>PNG 图像 (*.png)</translation>
</message>
<translation>捕获文件属性</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="151"/>
+ <location filename="capture_file_properties_dialog.cpp" line="152"/>
<source>Unknown</source>
<translation>未知</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="154"/>
+ <location filename="capture_file_properties_dialog.cpp" line="155"/>
<source>File</source>
<translation>文件</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="158"/>
+ <location filename="capture_file_properties_dialog.cpp" line="159"/>
<source>Name</source>
<translation>名称</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="163"/>
+ <location filename="capture_file_properties_dialog.cpp" line="164"/>
<source>Length</source>
<translation>长度</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="169"/>
+ <location filename="capture_file_properties_dialog.cpp" line="170"/>
<source> (gzip compressed)</source>
<translation>（gzip 压缩）</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="172"/>
+ <location filename="capture_file_properties_dialog.cpp" line="173"/>
<source>Format</source>
<translation>格式</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="186"/>
+ <location filename="capture_file_properties_dialog.cpp" line="187"/>
<source>Encapsulation</source>
<translation>封装</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="192"/>
+ <location filename="capture_file_properties_dialog.cpp" line="193"/>
<source>Snapshot length</source>
<translation>快照长度</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="203"/>
+ <location filename="capture_file_properties_dialog.cpp" line="204"/>
<source>Time</source>
<translation>时间</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="208"/>
+ <location filename="capture_file_properties_dialog.cpp" line="209"/>
<source>First packet</source>
<translation>第一个分组</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="214"/>
+ <location filename="capture_file_properties_dialog.cpp" line="215"/>
<source>Last packet</source>
<translation>最后分组</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="234"/>
+ <location filename="capture_file_properties_dialog.cpp" line="235"/>
<source>Elapsed</source>
<translation>经过时间</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="243"/>
+ <location filename="capture_file_properties_dialog.cpp" line="244"/>
<source>Capture</source>
<translation>捕获</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="252"/>
+ <location filename="capture_file_properties_dialog.cpp" line="253"/>
<source>Hardware</source>
<translation>硬件</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="261"/>
+ <location filename="capture_file_properties_dialog.cpp" line="262"/>
<source>OS</source>
<translation>OS</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="270"/>
+ <location filename="capture_file_properties_dialog.cpp" line="271"/>
<source>Application</source>
<translation>应用</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="278"/>
+ <location filename="capture_file_properties_dialog.cpp" line="279"/>
<source>Interfaces</source>
<translation>接口</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="282"/>
+ <location filename="capture_file_properties_dialog.cpp" line="283"/>
<source>Interface</source>
<translation>接口</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="283"/>
+ <location filename="capture_file_properties_dialog.cpp" line="284"/>
<source>Dropped packets</source>
<translation>丢弃分组</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="284"/>
+ <location filename="capture_file_properties_dialog.cpp" line="285"/>
<source>Capture filter</source>
<translation>捕获筛选器</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="285"/>
+ <location filename="capture_file_properties_dialog.cpp" line="286"/>
<source>Link type</source>
<translation>链路类型</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="286"/>
+ <location filename="capture_file_properties_dialog.cpp" line="287"/>
<source>Packet size limit</source>
<translation>分组大小限制</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="316"/>
+ <location filename="capture_file_properties_dialog.cpp" line="317"/>
<source>none</source>
<translation>无</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="319"/>
+ <location filename="capture_file_properties_dialog.cpp" line="320"/>
<source>%1 bytes</source>
<translation>%1 字节</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="335"/>
+ <location filename="capture_file_properties_dialog.cpp" line="336"/>
<source>Statistics</source>
<translation>统计</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="339"/>
+ <location filename="capture_file_properties_dialog.cpp" line="340"/>
<source>Measurement</source>
<translation>测量</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="340"/>
+ <location filename="capture_file_properties_dialog.cpp" line="341"/>
<source>Captured</source>
<translation>已捕获</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="341"/>
+ <location filename="capture_file_properties_dialog.cpp" line="342"/>
<source>Displayed</source>
<translation>已显示</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="342"/>
+ <location filename="capture_file_properties_dialog.cpp" line="343"/>
<source>Marked</source>
<translation>标记</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="346"/>
+ <location filename="capture_file_properties_dialog.cpp" line="347"/>
<source>N/A</source>
<translation>N/A</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="363"/>
+ <location filename="capture_file_properties_dialog.cpp" line="364"/>
<source>Packets</source>
<translation>分组</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="381"/>
+ <location filename="capture_file_properties_dialog.cpp" line="382"/>
<source>Time span, s</source>
<translation>时间跨度,s</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="399"/>
+ <location filename="capture_file_properties_dialog.cpp" line="400"/>
<source>Average pps</source>
<translation>平均 pps</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="417"/>
+ <location filename="capture_file_properties_dialog.cpp" line="418"/>
<source>Average packet size, B</source>
<translation>平均分组大小,B</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="436"/>
+ <location filename="capture_file_properties_dialog.cpp" line="437"/>
<source>Bytes</source>
<translation>字节</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="457"/>
+ <location filename="capture_file_properties_dialog.cpp" line="458"/>
<source>Average bytes/s</source>
<translation>平均 字节/秒</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="478"/>
+ <location filename="capture_file_properties_dialog.cpp" line="479"/>
<source>Average bits/s</source>
<translation>平均 比特/秒</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="510"/>
+ <location filename="capture_file_properties_dialog.cpp" line="511"/>
<source>File Comment</source>
<translation>文件注释</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="519"/>
+ <location filename="capture_file_properties_dialog.cpp" line="520"/>
<source>Packet Comments</source>
<translation>分组注释</translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="526"/>
+ <location filename="capture_file_properties_dialog.cpp" line="527"/>
<source><p>Frame %1: </source>
<translation><p>帧 %1: </translation>
</message>
<message>
- <location filename="capture_file_properties_dialog.cpp" line="584"/>
+ <location filename="capture_file_properties_dialog.cpp" line="585"/>
<source>Created by Wireshark %1
</source>
<translation>显示筛选器条目</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="204"/>
+ <location filename="display_filter_edit.cpp" line="209"/>
<source>Enter a display filter %1</source>
<translation>输入显示筛选器 %1</translation>
</message>
<message>
- <location filename="display_filter_edit.cpp" line="208"/>
+ <location filename="display_filter_edit.cpp" line="204"/>
<source>Apply a display filter %1 <%2/></source>
<translation>应用显示筛选器 %1 <%2/></translation>
</message>
<context>
<name>ExtcapOptionsDialog</name>
<message>
- <location filename="extcap_options_dialog.cpp" line="66"/>
- <location filename="extcap_options_dialog.cpp" line="104"/>
+ <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="106"/>
<source>Extcap Interface Options</source>
<translation>Extcap 接口选项</translation>
</message>
<message>
- <location filename="extcap_options_dialog.cpp" line="70"/>
+ <location filename="extcap_options_dialog.cpp" line="72"/>
<source>Start</source>
<translation>开始</translation>
</message>
<context>
<name>FollowStreamDialog</name>
<message>
- <location filename="follow_stream_dialog.cpp" line="100"/>
+ <location filename="follow_stream_dialog.cpp" line="99"/>
<source>Hide this stream</source>
<translation>隐藏这条流</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="103"/>
+ <location filename="follow_stream_dialog.cpp" line="102"/>
<source>Print</source>
<translation>打印</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="106"/>
+ <location filename="follow_stream_dialog.cpp" line="105"/>
<source>Save as</source>
<oldsource>Save as...</oldsource>
<translation>另存为</translation>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="91"/>
+ <location filename="follow_stream_dialog.cpp" line="90"/>
<source>ASCII</source>
<translation>ASCII</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="92"/>
+ <location filename="follow_stream_dialog.cpp" line="91"/>
<source>C Arrays</source>
<translation>C Arrays</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="93"/>
+ <location filename="follow_stream_dialog.cpp" line="92"/>
<source>EBCDIC</source>
<translation>EBCDIC</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="94"/>
+ <location filename="follow_stream_dialog.cpp" line="93"/>
<source>Hex Dump</source>
<translation>Hex 转储</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="95"/>
+ <location filename="follow_stream_dialog.cpp" line="94"/>
<source>UTF-8</source>
<translation>UTF-8</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="96"/>
+ <location filename="follow_stream_dialog.cpp" line="95"/>
<source>YAML</source>
<translation>YAML</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="97"/>
+ <location filename="follow_stream_dialog.cpp" line="96"/>
<source>Raw</source>
<translation>原始数据</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="150"/>
+ <location filename="follow_stream_dialog.cpp" line="149"/>
<source>Packet %1. </source>
<translation>分组 %1。</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="153"/>
+ <location filename="follow_stream_dialog.cpp" line="152"/>
<source>%Ln <span style="color: %1; background-color:%2">client</span> pkt(s), </source>
<translation>
<numerusform>%Ln <span style="color: %1; background-color:%2">客户端</span> 分组, </numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="156"/>
+ <location filename="follow_stream_dialog.cpp" line="155"/>
<source>%Ln <span style="color: %1; background-color:%2">server</span> pkt(s), </source>
<translation>
<numerusform>%Ln <span style="color: %1; background-color:%2">服务器</span> 分组, </numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="159"/>
+ <location filename="follow_stream_dialog.cpp" line="158"/>
<source>%Ln turn(s).</source>
<translation>
<numerusform>%Ln turn(s).</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="162"/>
+ <location filename="follow_stream_dialog.cpp" line="161"/>
<source> Click to select.</source>
<translation>点击选择。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="223"/>
+ <location filename="follow_stream_dialog.cpp" line="222"/>
<source>Save Stream Content As</source>
<translation>保存流的内容为</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="597"/>
+ <location filename="follow_stream_dialog.cpp" line="596"/>
<source>
[Stream output truncated]</source>
<translation>[流量输出截断]</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>No capture file.</source>
<translation>无捕获文件。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="867"/>
+ <location filename="follow_stream_dialog.cpp" line="865"/>
<source>Please make sure you have a capture file opened.</source>
<translation>请确认您已经打开一个捕获文件。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
- <location filename="follow_stream_dialog.cpp" line="883"/>
- <location filename="follow_stream_dialog.cpp" line="889"/>
- <location filename="follow_stream_dialog.cpp" line="897"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
+ <location filename="follow_stream_dialog.cpp" line="895"/>
<source>Error following stream.</source>
<translation>追踪流错误。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="873"/>
+ <location filename="follow_stream_dialog.cpp" line="871"/>
<source>Capture file invalid.</source>
<translation>捕获文件无效。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="883"/>
+ <location filename="follow_stream_dialog.cpp" line="881"/>
<source>Please make sure you have a TCP packet selected.</source>
<translation>请确认您已经选中一个 TCP 分组。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="889"/>
+ <location filename="follow_stream_dialog.cpp" line="887"/>
<source>Please make sure you have a UDP packet selected.</source>
<translation>请确认您已经选中一个 UDP 分组。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="898"/>
+ <location filename="follow_stream_dialog.cpp" line="896"/>
<source>Please make sure you have an SSL packet selected.</source>
<translation>请确认您已经选中一个 SSL 分组。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="921"/>
+ <location filename="follow_stream_dialog.cpp" line="919"/>
<source>Error creating filter for this stream.</source>
<translation>为这条流创建筛选器时出错。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="922"/>
+ <location filename="follow_stream_dialog.cpp" line="920"/>
<source>A transport or network layer header is needed.</source>
<translation>需要传输层或网络层头部。</translation>
</message>
<message numerus="yes">
- <location filename="follow_stream_dialog.cpp" line="979"/>
- <location filename="follow_stream_dialog.cpp" line="998"/>
+ <location filename="follow_stream_dialog.cpp" line="977"/>
+ <location filename="follow_stream_dialog.cpp" line="996"/>
<source>%Ln total stream(s).</source>
<translation>
<numerusform>%Ln 全部流。</numerusform>
</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1055"/>
+ <location filename="follow_stream_dialog.cpp" line="1058"/>
<source>Could not read from temporary file %1: %2</source>
<translation>无法从临时文件%1: %2中读取</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1060"/>
- <location filename="follow_stream_dialog.cpp" line="1306"/>
+ <location filename="follow_stream_dialog.cpp" line="1063"/>
+ <location filename="follow_stream_dialog.cpp" line="1312"/>
<source>Short read from temporary file %1: expected %2, got %3</source>
<translation>从临时文件 %1 中短读: 期待 %2, 获取 %3</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1213"/>
+ <location filename="follow_stream_dialog.cpp" line="1218"/>
<source>Follow TCP Stream (%1)</source>
<translation>追踪 TCP 流 (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1220"/>
+ <location filename="follow_stream_dialog.cpp" line="1225"/>
<source>Follow UDP Stream (%1)</source>
<translation>追踪 UDP 流 (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1227"/>
+ <location filename="follow_stream_dialog.cpp" line="1232"/>
<source>Follow SSL Stream (%1)</source>
<translation>追踪 SSL 流 (%1)</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1250"/>
+ <location filename="follow_stream_dialog.cpp" line="1256"/>
<source>File closed.</source>
<translation>文件关闭。</translation>
</message>
<message>
- <location filename="follow_stream_dialog.cpp" line="1358"/>
+ <location filename="follow_stream_dialog.cpp" line="1364"/>
<source>Error reading temporary file</source>
<translation>读取临时文件错误</translation>
</message>
<context>
<name>IOGraph</name>
<message>
- <location filename="io_graph_dialog.cpp" line="1824"/>
+ <location filename="io_graph_dialog.cpp" line="1832"/>
<source>Unknown</source>
<translation>未知</translation>
</message>
<translation>点击选择图形的一部分.</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1516"/>
+ <location filename="io_graph_dialog.cpp" line="1524"/>
<source>Portable Document Format (*.pdf)</source>
<translation>便携式文档格式 (*.pdf)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1517"/>
+ <location filename="io_graph_dialog.cpp" line="1525"/>
<source>Portable Network Graphics (*.png)</source>
<translation>便携式网络图形格式 (*.png)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1518"/>
+ <location filename="io_graph_dialog.cpp" line="1526"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Windows 位图 (*.bmp)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1520"/>
+ <location filename="io_graph_dialog.cpp" line="1528"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG 文件交换格式 (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1521"/>
+ <location filename="io_graph_dialog.cpp" line="1529"/>
<source>Comma Separated Values (*.csv)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1533"/>
+ <location filename="io_graph_dialog.cpp" line="1541"/>
<source>Save Graph As</source>
<translation>图形保存为</translation>
</message>
<translation>禁止自动更新。</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="277"/>
+ <location filename="main_welcome.cpp" line="283"/>
<source>not found</source>
<translation>未找到</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="347"/>
+ <location filename="main_welcome.cpp" line="356"/>
<source>Copy file path</source>
<translation>复制文件路径</translation>
</message>
<translation>Ctrl+Shift+E</translation>
</message>
<message>
- <location filename="main_window.cpp" line="349"/>
+ <location filename="main_window.cpp" line="353"/>
<source>Check for Updates</source>
<oldsource>Check for Updates...</oldsource>
<translation>检查更新</translation>
</message>
<message>
- <location filename="main_window.cpp" line="727"/>
+ <location filename="main_window.cpp" line="731"/>
<source> before quitting</source>
<translation>在退出前</translation>
</message>
<message>
- <location filename="main_window.cpp" line="903"/>
+ <location filename="main_window.cpp" line="907"/>
<source>Save packets before merging?</source>
<translation>是否在合并之前保存分组？</translation>
</message>
<message>
- <location filename="main_window.cpp" line="904"/>
+ <location filename="main_window.cpp" line="908"/>
<source>A temporary capture file can't be merged.</source>
<translation>无法合并临时捕获文件。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="910"/>
+ <location filename="main_window.cpp" line="914"/>
<source>Save changes in "%1" before merging?</source>
<translation>是否在合并前保存对“%1”的更改？</translation>
</message>
<message>
- <location filename="main_window.cpp" line="912"/>
+ <location filename="main_window.cpp" line="916"/>
<source>Changes must be saved before the files can be merged.</source>
<translation>在文件合并之前，其更改必须先保存。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="971"/>
<location filename="main_window_slots.cpp" line="215"/>
<source>Invalid Display Filter</source>
<translation>无效显示筛选器</translation>
</message>
<message>
- <location filename="main_window.cpp" line="972"/>
<source>The filter expression %1 isn't a valid display filter. (%2).</source>
- <translation>筛选器表达式 %1 不是有效的显示筛选器 (%2)。</translation>
+ <translation type="vanished">筛选器表达式 %1 不是有效的显示筛选器 (%2)。</translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="973"/>
+ <source>Invalid Read Filter</source>
+ <translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window.cpp" line="1063"/>
+ <location filename="main_window.cpp" line="974"/>
+ <source>The filter expression %1 isn't a valid read filter. (%2).</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="main_window.cpp" line="1064"/>
<source> before importing a new capture</source>
<translation> 导入新捕获前</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1376"/>
+ <location filename="main_window.cpp" line="1377"/>
<source>Unable to export to "%1".</source>
<translation>无法导出“%1”。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1377"/>
+ <location filename="main_window.cpp" line="1378"/>
<source>You cannot export packets to the current capture file.</source>
<translation>您不能将分组导出到当前捕获文件。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1464"/>
- <location filename="main_window.cpp" line="1489"/>
+ <location filename="main_window.cpp" line="1465"/>
+ <location filename="main_window.cpp" line="1490"/>
<source>.</source>
<translation>.</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1527"/>
+ <location filename="main_window.cpp" line="1528"/>
<source>You have unsaved packets</source>
<translation>您有未保存的分组</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1528"/>
+ <location filename="main_window.cpp" line="1529"/>
<source>They will be lost if you don't save them.</source>
<translation>若不保存，这些分组将会丢失。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1531"/>
- <location filename="main_window.cpp" line="1544"/>
+ <location filename="main_window.cpp" line="1532"/>
+ <location filename="main_window.cpp" line="1545"/>
<source>Do you want to stop the capture and save the captured packets</source>
<translation>您是否要停止捕获，并保存已捕获的分组</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1533"/>
+ <location filename="main_window.cpp" line="1534"/>
<source>Do you want to save the captured packets</source>
<translation>是否希望保存已捕获的分组</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1535"/>
- <location filename="main_window.cpp" line="1545"/>
+ <location filename="main_window.cpp" line="1536"/>
+ <location filename="main_window.cpp" line="1546"/>
<source>?</source>
<translation>?</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1547"/>
+ <location filename="main_window.cpp" line="1548"/>
<source>Your captured packets will be lost if you don't save them.</source>
<translation>若不保存，您已经捕获的分组将会丢失。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1550"/>
+ <location filename="main_window.cpp" line="1551"/>
<source>Do you want to save the changes you've made to the capture file "%1"%2?</source>
<translation>是否希望保存对捕获文件“%1”%2 的更改？</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1556"/>
+ <location filename="main_window.cpp" line="1557"/>
<source>Your changes will be lost if you don't save them.</source>
<translation>若不保存，您的更改将会丢失。</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1568"/>
+ <location filename="main_window.cpp" line="1569"/>
<source>Stop and Save</source>
<translation>停止并保存</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1576"/>
+ <location filename="main_window.cpp" line="1577"/>
<source>Stop and Quit without Saving</source>
<translation>停止并退出，不保存</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1579"/>
+ <location filename="main_window.cpp" line="1580"/>
<source>Quit without Saving</source>
<translation>不保存，直接退出</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1584"/>
+ <location filename="main_window.cpp" line="1585"/>
<source>Stop and Continue without Saving</source>
<translation>停止并继续，不保存</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1587"/>
+ <location filename="main_window.cpp" line="1588"/>
<source>Continue &without Saving</source>
<translation>不保存并继续(&W)</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1886"/>
+ <location filename="main_window.cpp" line="1883"/>
<source>(File name can't be mapped to UTF-8)</source>
<translation>文件名不能映射到UTF-8</translation>
</message>
<message>
- <location filename="main_window.cpp" line="1898"/>
- <location filename="main_window.cpp" line="1904"/>
- <location filename="main_window.cpp" line="1919"/>
+ <location filename="main_window.cpp" line="1901"/>
<source>The Wireshark Network Analyzer</source>
<translation>Wireshark 网络分析器</translation>
</message>
+ <message>
+ <location filename="main_window.cpp" line="1908"/>
+ <source>Capturing from %1</source>
+ <translation type="unfinished"></translation>
+ </message>
<message>
<location filename="main_window_slots.cpp" line="654"/>
<source>%1: %2</source>
<translation>%1: %2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="735"/>
+ <location filename="main_window_slots.cpp" line="739"/>
<source>Saving %1</source>
<translation>正在保存 %1</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="774"/>
+ <location filename="main_window_slots.cpp" line="778"/>
<source>No interface selected</source>
<translation>未选中接口</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="786"/>
+ <location filename="main_window_slots.cpp" line="788"/>
<source>Invalid capture filter</source>
<translation>无效捕获筛选器</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="982"/>
+ <location filename="main_window_slots.cpp" line="986"/>
<source>Clear Menu</source>
<translation>清除菜单</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1470"/>
+ <location filename="main_window_slots.cpp" line="1475"/>
<source>Please wait while Wireshark is initializing</source>
<translation>Wireshark 正在初始化，请稍候</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1627"/>
+ <location filename="main_window_slots.cpp" line="1632"/>
<source>Export Selected Packet Bytes</source>
<translation>导出选择分组字节流</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1629"/>
+ <location filename="main_window_slots.cpp" line="1634"/>
<source>Raw data (*.bin *.dat *.raw);;Any File (*.*)</source>
<translation>原始数据 (*.bin *.dat *.raw);;任意文件 (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1686"/>
+ <location filename="main_window_slots.cpp" line="1691"/>
<source>No Keys</source>
<translation>无密钥</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1687"/>
+ <location filename="main_window_slots.cpp" line="1692"/>
<source>There are no SSL Session Keys to save.</source>
<translation>没有可以保存的 SSL 会话密钥。</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1693"/>
+ <location filename="main_window_slots.cpp" line="1698"/>
<source>Export SSL Session Keys (%1 key%2</source>
<translation>导出 SSL 会话密钥 (%1 密钥%2</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1698"/>
+ <location filename="main_window_slots.cpp" line="1703"/>
<source>SSL Session Keys (*.keys *.txt);;Any File (*.*)</source>
<translation>SSL 会话密钥 (*.keys *.txt);;任意文件 (*.*)</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="1836"/>
+ <location filename="main_window_slots.cpp" line="1841"/>
<source>Couldn't copy text. Try another item.</source>
<translation>无法复制文本。请尝试其他对象。</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2240"/>
- <location filename="main_window_slots.cpp" line="3305"/>
+ <location filename="main_window_slots.cpp" line="2248"/>
+ <location filename="main_window_slots.cpp" line="3313"/>
<source>Unable to build conversation filter.</source>
<translation>无法建立对话筛选器。</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="2398"/>
+ <location filename="main_window_slots.cpp" line="2406"/>
<source>No filter available. Try another </source>
<translation>无筛选器可用。请尝试其他 </translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3312"/>
+ <location filename="main_window_slots.cpp" line="3320"/>
<source>Error compiling filter for this conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3321"/>
+ <location filename="main_window_slots.cpp" line="3329"/>
<source>No previous/next packet in conversation.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3398"/>
+ <location filename="main_window_slots.cpp" line="3406"/>
<source>No Interface Selected</source>
<translation>未选中接口</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3405"/>
+ <location filename="main_window_slots.cpp" line="3413"/>
<source> before starting a new capture</source>
<translation>在开始新捕获前</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3608"/>
+ <location filename="main_window_slots.cpp" line="3616"/>
<source>Wiki Page for %1</source>
<translation>%1 的 Wiki 页面</translation>
</message>
<message>
- <location filename="main_window_slots.cpp" line="3609"/>
+ <location filename="main_window_slots.cpp" line="3617"/>
<source><p>The Wireshark Wiki is maintained by the community.</p><p>The page you are about to load might be wonderful, incomplete, wrong, or nonexistent.</p><p>Proceed to the wiki?</p></source>
<translation><p>Wireshark Wiki 由社区进行维护。</p><p>您即将加载的页面可能是良好的、不完整的、有错误的，甚至不存在的。</p><p>继续访问该 Wiki？</p></translation>
</message>
<context>
<name>MulticastStatisticsDialog</name>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="173"/>
+ <location filename="multicast_statistics_dialog.cpp" line="171"/>
<source>UDP Multicast Streams</source>
<translation>UDP 多播流</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Address</source>
<translation>源地址</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="184"/>
+ <location filename="multicast_statistics_dialog.cpp" line="182"/>
<source>Source Port</source>
<translation>源端口</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Address</source>
<translation>目的地址</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="185"/>
+ <location filename="multicast_statistics_dialog.cpp" line="183"/>
<source>Destination Port</source>
<translation>目的端口</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets</source>
<translation>分组</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="186"/>
+ <location filename="multicast_statistics_dialog.cpp" line="184"/>
<source>Packets/s</source>
<translation>包/秒</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Avg BW (bps)</source>
<translation>平均带宽 (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="187"/>
+ <location filename="multicast_statistics_dialog.cpp" line="185"/>
<source>Max BW (bps)</source>
<translation>最大带宽 (bps)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Max Burst</source>
<translation>最大突发</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="188"/>
+ <location filename="multicast_statistics_dialog.cpp" line="186"/>
<source>Burst Alarms</source>
<translation>突发警报</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Max Buffers (B)</source>
<translation>最大缓冲区 (B)</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="189"/>
+ <location filename="multicast_statistics_dialog.cpp" line="187"/>
<source>Buffer Alarms</source>
<translation>缓冲区警报</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="215"/>
+ <location filename="multicast_statistics_dialog.cpp" line="213"/>
<source>Burst measurement interval (ms):</source>
<translation>突发测量间隔 (ms):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="217"/>
+ <location filename="multicast_statistics_dialog.cpp" line="215"/>
<source>Burst alarm threshold (packets):</source>
<translation>突发警报门槛 (包):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="219"/>
+ <location filename="multicast_statistics_dialog.cpp" line="217"/>
<source>Buffer alarm threshold (B):</source>
<translation>突发警报门槛 (B):</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="222"/>
+ <location filename="multicast_statistics_dialog.cpp" line="220"/>
<source>Stream empty speed (Kb/s):</source>
<oldsource>Stream empty speed (Kb/s:</oldsource>
<translation type="unfinished">流清空速度 (Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="224"/>
+ <location filename="multicast_statistics_dialog.cpp" line="222"/>
<source>Total empty speed (Kb/s):</source>
<oldsource>Total empty speed (Kb/s:</oldsource>
<translation type="unfinished">总清空速度 (Kb/s:</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="332"/>
+ <location filename="multicast_statistics_dialog.cpp" line="328"/>
<source>The burst interval must be between 1 and 1000. </source>
<translation>突发间隔必须介于 1 与 1000 之间。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="341"/>
+ <location filename="multicast_statistics_dialog.cpp" line="337"/>
<source>The burst alarm threshold isn't valid. </source>
<translation>突发警报门槛无效。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="350"/>
+ <location filename="multicast_statistics_dialog.cpp" line="346"/>
<source>The buffer alarm threshold isn't valid. </source>
<translation>缓冲区警报门槛无效。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="359"/>
+ <location filename="multicast_statistics_dialog.cpp" line="355"/>
<source>The stream empty speed should be between 1 and 10000000. </source>
<translation>流清空速度应该介于 1 与 10000000 之间。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="368"/>
+ <location filename="multicast_statistics_dialog.cpp" line="364"/>
<source>The total empty speed should be between 1 and 10000000. </source>
<translation>总清空速度应该介于 1 与 10000000 之间。</translation>
</message>
<message>
- <location filename="multicast_statistics_dialog.cpp" line="382"/>
+ <location filename="multicast_statistics_dialog.cpp" line="378"/>
<source>%1 streams, avg bw: %2bps, max bw: %3bps, max burst: %4 / %5ms, max buffer: %6B</source>
<translation>%1 流，平均带宽: %2bps，最大带宽: %3bps，最大突发: %4 / %5ms，最大缓冲区: %6B</translation>
</message>
<translation>分组 %1</translation>
</message>
<message>
- <location filename="packet_dialog.cpp" line="134"/>
+ <location filename="packet_dialog.cpp" line="133"/>
<source>[%1 closed] </source>
<translation>[%1 已关闭] </translation>
</message>
<context>
<name>PacketList</name>
<message>
- <location filename="packet_list.cpp" line="335"/>
+ <location filename="packet_list.cpp" line="337"/>
<source>Summary as Text</source>
<translation>摘要为文本</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="592"/>
+ <location filename="packet_list.cpp" line="627"/>
<source>Align Left</source>
<translation>左对齐</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="593"/>
+ <location filename="packet_list.cpp" line="628"/>
<source>Align Center</source>
<translation>居中对齐</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="594"/>
+ <location filename="packet_list.cpp" line="629"/>
<source>Align Right</source>
<translation>右对齐</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="596"/>
+ <location filename="packet_list.cpp" line="631"/>
<source>Column Preferences</source>
<translation>列首选项</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="597"/>
+ <location filename="packet_list.cpp" line="632"/>
<source>Edit Column</source>
<translation>编辑列</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="598"/>
+ <location filename="packet_list.cpp" line="633"/>
<source>Resize To Contents</source>
<translation>适应内容</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="599"/>
+ <location filename="packet_list.cpp" line="634"/>
<source>Resolve Names</source>
<translation>名称解析</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="604"/>
+ <location filename="packet_list.cpp" line="639"/>
<source>Remove This Column</source>
<translation>删除此列</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="958"/>
+ <location filename="packet_list.cpp" line="980"/>
<source>Frame %1: %2
</source>
</translation>
</message>
<message>
- <location filename="packet_list.cpp" line="962"/>
+ <location filename="packet_list.cpp" line="984"/>
<source>[ Comment text exceeds %1. Stopping. ]</source>
<translation>[ 注释文本超过 %1。正在停止。 ]</translation>
</message>
<context>
<name>PacketListModel</name>
<message>
- <location filename="packet_list_model.cpp" line="296"/>
+ <location filename="packet_list_model.cpp" line="297"/>
<source>Dissecting</source>
<translation>剖析</translation>
</message>
<message>
- <location filename="packet_list_model.cpp" line="318"/>
+ <location filename="packet_list_model.cpp" line="319"/>
<source>Sorting "%1"</source>
<translation>正在排序“%1”</translation>
</message>
<translation>取消</translation>
</message>
<message>
- <location filename="preference_editor_frame.cpp" line="71"/>
+ <location filename="preference_editor_frame.cpp" line="73"/>
<source>Open %1 preferences</source>
<translation>打开 %1 首选项</translation>
</message>
<translation>窗口大小 (B)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1918"/>
+ <location filename="io_graph_dialog.cpp" line="1926"/>
<source>Packets/s</source>
<translation>包/秒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1919"/>
+ <location filename="io_graph_dialog.cpp" line="1927"/>
<source>Bytes/s</source>
<translation>字节/秒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1920"/>
+ <location filename="io_graph_dialog.cpp" line="1928"/>
<source>Bits/s</source>
<translation>比特/秒</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1921"/>
+ <location filename="io_graph_dialog.cpp" line="1929"/>
<source>SUM(Y Field)</source>
<translation>总和 (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1922"/>
+ <location filename="io_graph_dialog.cpp" line="1930"/>
<source>COUNT FRAMES(Y Field)</source>
<translation>COUNT FRAMES (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1923"/>
+ <location filename="io_graph_dialog.cpp" line="1931"/>
<source>COUNT FIELDS(Y Field)</source>
<translation>COUNT FIELDS (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1924"/>
+ <location filename="io_graph_dialog.cpp" line="1932"/>
<source>MAX(Y Field)</source>
<translation>最大值 (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1925"/>
+ <location filename="io_graph_dialog.cpp" line="1933"/>
<source>MIN(Y Field)</source>
<translation>最小值 (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1926"/>
+ <location filename="io_graph_dialog.cpp" line="1934"/>
<source>AVG(Y Field)</source>
<translation>平均值 (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1927"/>
+ <location filename="io_graph_dialog.cpp" line="1935"/>
<source>LOAD(Y Field)</source>
<translation>星形 (Y字段)</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1936"/>
+ <location filename="io_graph_dialog.cpp" line="1944"/>
<source>Line</source>
<translation>折线</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1937"/>
+ <location filename="io_graph_dialog.cpp" line="1945"/>
<source>Impulse</source>
<translation>脉冲</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1938"/>
+ <location filename="io_graph_dialog.cpp" line="1946"/>
<source>Bar</source>
<translation>条形</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1939"/>
+ <location filename="io_graph_dialog.cpp" line="1947"/>
<source>Stacked Bar</source>
<translation>堆积条形图</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1940"/>
+ <location filename="io_graph_dialog.cpp" line="1948"/>
<source>Dot</source>
<translation>点</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1941"/>
+ <location filename="io_graph_dialog.cpp" line="1949"/>
<source>Square</source>
<translation>方形</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1942"/>
+ <location filename="io_graph_dialog.cpp" line="1950"/>
<source>Diamond</source>
<translation>星形</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1953"/>
+ <location filename="io_graph_dialog.cpp" line="1961"/>
<source>None</source>
<translation>无</translation>
</message>
<message>
- <location filename="io_graph_dialog.cpp" line="1955"/>
+ <location filename="io_graph_dialog.cpp" line="1963"/>
<source>%1 interval SMA</source>
<translation>%1 间隔 SMA</translation>
</message>
<translation>优先级</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="330"/>
+ <location filename="main_welcome.cpp" line="339"/>
<source>Show in Finder</source>
<translation>在 Finder 中显示</translation>
</message>
<message>
- <location filename="main_welcome.cpp" line="332"/>
+ <location filename="main_welcome.cpp" line="341"/>
<source>Show in Folder</source>
<translation>在 Finder 中显示</translation>
</message>
<translation>播放流</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="258"/>
+ <location filename="rtp_player_dialog.cpp" line="275"/>
<source>Out of Sequence</source>
<translation>乱序</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="273"/>
+ <location filename="rtp_player_dialog.cpp" line="290"/>
<source>Jitter Drops</source>
<translation>抖动过滤</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="288"/>
+ <location filename="rtp_player_dialog.cpp" line="305"/>
<source>Wrong Timestamps</source>
<translation>错误的时间戳</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="303"/>
+ <location filename="rtp_player_dialog.cpp" line="320"/>
<source>Inserted Silence</source>
<translation>插入的静默</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="483"/>
+ <location filename="rtp_player_dialog.cpp" line="500"/>
<source>%1. Press "G" to go to packet %2</source>
<translation>%1. 按 "G" 去到数据包 %2</translation>
</message>
<message>
- <location filename="rtp_player_dialog.cpp" line="667"/>
+ <location filename="rtp_player_dialog.cpp" line="684"/>
<source>Unknown</source>
<translation>未知</translation>
</message>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="73"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="298"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="308"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
<source>Association</source>
<translation>关联</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="78"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="299"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="309"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
<source>Endpoint 1</source>
<translation>端点1</translation>
</message>
<message>
<location filename="sctp_chunk_statistics_dialog.ui" line="83"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="300"/>
- <location filename="sctp_chunk_statistics_dialog.cpp" line="310"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="301"/>
+ <location filename="sctp_chunk_statistics_dialog.cpp" line="311"/>
<source>Endpoint 2</source>
<translation>端点2</translation>
</message>
<translation>取消</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="267"/>
+ <location filename="search_frame.cpp" line="273"/>
<source>No valid search type selected. Please report this to the development team.</source>
<translation>未选择有效的搜索类型。请将此问题报告给开发团队。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="221"/>
+ <location filename="search_frame.cpp" line="227"/>
<source>Invalid filter.</source>
<translation>无效筛选器。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="227"/>
+ <location filename="search_frame.cpp" line="233"/>
<source>That filter doesn't test anything.</source>
<translation>该筛选器未测试任何项目。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="235"/>
+ <location filename="search_frame.cpp" line="241"/>
<source>That's not a valid hex string.</source>
<translation>不是有效的十六进制字符串。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="243"/>
+ <location filename="search_frame.cpp" line="249"/>
<source>You didn't specify any text for which to search.</source>
<translation>您未指定任何要搜索的文本。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="260"/>
+ <location filename="search_frame.cpp" line="266"/>
<source>No valid character set selected. Please report this to the development team.</source>
<translation>未选择有效的字符集。请将此问题报告给开发团队。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="283"/>
+ <location filename="search_frame.cpp" line="289"/>
<source>No valid search area selected. Please report this to the development team.</source>
<translation>未选择有效的搜索范围。请将此问题报告给开发团队。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="297"/>
+ <location filename="search_frame.cpp" line="303"/>
<source>No packet contained those bytes.</source>
<translation>无分组包含这些字节流。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="307"/>
+ <location filename="search_frame.cpp" line="313"/>
<source>No packet contained that string in its Info column.</source>
<translation>无分组的“信息”列包含该字符串。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="316"/>
+ <location filename="search_frame.cpp" line="322"/>
<source>No packet contained that string in its dissected display.</source>
<translation>无分组的解析视图包含该字符串。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="325"/>
+ <location filename="search_frame.cpp" line="331"/>
<source>No packet contained that string in its converted data.</source>
<translation>无分组转换后的数据包含该字符串。</translation>
</message>
<message>
- <location filename="search_frame.cpp" line="335"/>
+ <location filename="search_frame.cpp" line="341"/>
<source>No packet matched that filter.</source>
<translation>无分组与该筛选器匹配。</translation>
</message>
<translation>呼叫流</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="124"/>
+ <location filename="sequence_dialog.cpp" line="119"/>
<source>Save As</source>
<oldsource>Save As...</oldsource>
<translation>另存为</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="278"/>
+ <location filename="sequence_dialog.cpp" line="273"/>
<source>No data</source>
<translation>无数据</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="280"/>
+ <location filename="sequence_dialog.cpp" line="275"/>
<source>%Ln node(s)</source>
<translation>
<numerusform>%Ln 节点</numerusform>
</translation>
</message>
<message numerus="yes">
- <location filename="sequence_dialog.cpp" line="281"/>
+ <location filename="sequence_dialog.cpp" line="276"/>
<source>%Ln item(s)</source>
<translation>
<numerusform>%Ln 项目</numerusform>
</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="301"/>
+ <location filename="sequence_dialog.cpp" line="296"/>
<source>Portable Document Format (*.pdf)</source>
<translation>便携式文档格式 (*.pdf)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="302"/>
+ <location filename="sequence_dialog.cpp" line="297"/>
<source>Portable Network Graphics (*.png)</source>
<translation>便携式网络图形格式 (*.png)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="303"/>
+ <location filename="sequence_dialog.cpp" line="298"/>
<source>Windows Bitmap (*.bmp)</source>
<translation>Windows 位图 (*.bmp)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="305"/>
+ <location filename="sequence_dialog.cpp" line="300"/>
<source>JPEG File Interchange Format (*.jpeg *.jpg)</source>
<translation>JPEG 文件交换格式 (*.jpeg *.jpg)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="306"/>
+ <location filename="sequence_dialog.cpp" line="301"/>
<source>ASCII (*.txt)</source>
<translation>ASCII (*.txt)</translation>
</message>
<message>
- <location filename="sequence_dialog.cpp" line="317"/>
+ <location filename="sequence_dialog.cpp" line="312"/>
<source>Save Graph As</source>
<oldsource>Wireshark: Save Graph As...</oldsource>
<translation>保存图形为</translation>
<translation>流序列</translation>
</message>
<message>
- <location filename="voip_calls_dialog.cpp" line="341"/>
+ <location filename="voip_calls_dialog.cpp" line="342"/>
<source>No Audio</source>
<translation>无音频</translation>
</message>
git.samba.org / metze / wireshark / wip.git / commitdiff