#include "strerror.h"
#endif
-#ifdef NEED_GETOPT_H
-#include "getopt.h"
+#ifdef HAVE_GETOPT_H
+#include <getopt.h>
+#else
+#include "wsgetopt.h"
#endif
#include <glib.h>
*/
static const gchar decode_as_arg_template[] = "<layer_type>==<selector>,<decode_as_protocol>";
+static guint32 cum_bytes;
static nstime_t first_ts;
static nstime_t prev_dis_ts;
static nstime_t prev_cap_ts;
-static GString *comp_info_str, *runtime_info_str;
static gboolean print_packet_info; /* TRUE if we're to print packet information */
+
+static gboolean perform_two_pass_analysis;
+
/*
* The way the packet decode is to be written.
*/
WRITE_FIELDS /* User defined list of fields */
/* Add CSV and the like here */
} output_action_e;
+
static output_action_e output_action;
static gboolean do_dissection; /* TRUE if we have to dissect each packet */
static gboolean verbose;
static gboolean print_hex;
static gboolean line_buffered;
-static guint32 cum_bytes = 0;
+
static print_format_e print_format = PR_FMT_TEXT;
static print_stream_t *print_stream;
capture_file cfile;
-/*
- * Mark a particular frame.
- * Copied from file.c
- */
-void
-cf_mark_frame(capture_file *cf, frame_data *frame)
-{
- if (! frame->flags.marked) {
- frame->flags.marked = TRUE;
- if (cf->count > cf->marked_count)
- cf->marked_count++;
- }
-}
-
-/*
- * Unmark a particular frame.
- * Copied from file.c
- */
void
-cf_unmark_frame(capture_file *cf, frame_data *frame)
+cf_mark_frame(capture_file *cf _U_, frame_data *frame _U_)
{
- if (frame->flags.marked) {
- frame->flags.marked = FALSE;
- if (cf->marked_count > 0)
- cf->marked_count--;
- }
+ g_assert_not_reached();
}
-
static void list_capture_types(void) {
int i;
}
static void
-log_func_ignore (const gchar *log_domain _U_, GLogLevelFlags log_level _U_,
- const gchar *message _U_, gpointer user_data _U_)
+tshark_log_handler (const gchar *log_domain, GLogLevelFlags log_level,
+ const gchar *message, gpointer user_data)
{
+ /* ignore log message, if log_level isn't interesting based
+ upon the console log preferences.
+ If the preferences haven't been loaded loaded yet, display the
+ message anyway.
+
+ The default console_log_level preference value is such that only
+ ERROR, CRITICAL and WARNING level messages are processed;
+ MESSAGE, INFO and DEBUG level messages are ignored.
+
+ XXX: Aug 07, 2009: Prior tshark g_log code was hardwired to process only
+ ERROR and CRITICAL level messages so the current code is a behavioral
+ change. The current behavior is the same as in Wireshark.
+ */
+ if((log_level & G_LOG_LEVEL_MASK & prefs.console_log_level) == 0 &&
+ prefs.console_log_level != 0) {
+ return;
+ }
+
+ g_log_default_handler(log_domain, log_level, message, user_data);
+
}
static char *
#endif
}
-
+static void
+show_version(GString *comp_info_str, GString *runtime_info_str)
+{
+ printf("TShark " VERSION "%s\n"
+ "\n"
+ "%s"
+ "\n"
+ "%s"
+ "\n"
+ "%s",
+ wireshark_svnversion, get_copyright_info(), comp_info_str->str,
+ runtime_info_str->str);
+}
int
main(int argc, char *argv[])
{
char *init_progfile_dir_error;
- int opt, i;
- extern char *optarg;
+ int opt;
gboolean arg_error = FALSE;
#ifdef _WIN32
GLogLevelFlags log_flags;
int optind_initial;
-#define OPTSTRING_INIT "a:b:c:C:d:De:E:f:F:G:hi:K:lLnN:o:pqr:R:s:St:T:vVw:xX:y:z:"
+#define OPTSTRING_INIT "a:b:c:C:d:De:E:f:F:G:hi:K:lLnN:o:pPqr:R:s:St:T:vVw:xX:y:z:"
#ifdef HAVE_LIBPCAP
#ifdef _WIN32
#define OPTSTRING_WIN32 "B:"
optind = optind_initial;
opterr = 1;
- /* nothing more than the standard GLib handler, but without a warning */
+
+
+/** Send All g_log messages to our own handler **/
+
log_flags =
+ G_LOG_LEVEL_ERROR|
+ G_LOG_LEVEL_CRITICAL|
G_LOG_LEVEL_WARNING|
G_LOG_LEVEL_MESSAGE|
G_LOG_LEVEL_INFO|
- G_LOG_LEVEL_DEBUG;
+ G_LOG_LEVEL_DEBUG|
+ G_LOG_FLAG_FATAL|G_LOG_FLAG_RECURSION;
g_log_set_handler(NULL,
log_flags,
- log_func_ignore, NULL /* user_data */);
+ tshark_log_handler, NULL /* user_data */);
+ g_log_set_handler(LOG_DOMAIN_MAIN,
+ log_flags,
+ tshark_log_handler, NULL /* user_data */);
+
+#ifdef HAVE_LIBPCAP
g_log_set_handler(LOG_DOMAIN_CAPTURE,
log_flags,
- log_func_ignore, NULL /* user_data */);
+ tshark_log_handler, NULL /* user_data */);
+ g_log_set_handler(LOG_DOMAIN_CAPTURE_CHILD,
+ log_flags,
+ tshark_log_handler, NULL /* user_data */);
+#endif
initialize_funnel_ops();
check_capture_privs();
- init_cap_file(&cfile);
-
- /* Assemble the compile-time version information string */
- comp_info_str = g_string_new("Compiled ");
- get_compiled_version_info(comp_info_str, get_epan_compiled_version_info);
-
- /* Assemble the run-time version information string */
- runtime_info_str = g_string_new("Running ");
- get_runtime_version_info(runtime_info_str, NULL);
+ cap_file_init(&cfile);
/* Print format defaults to this. */
print_format = PR_FMT_TEXT;
arg_error = TRUE;
#endif
break;
+#if GLIB_CHECK_VERSION(2,10,0)
+ case 'P': /* Perform two pass analysis */
+ perform_two_pass_analysis = TRUE;
+ break;
+#endif
case 'n': /* No name resolution */
g_resolv_flags = RESOLV_NONE;
break;
exit(1);
}
break;
- case 'v': /* Show version and exit */
- printf("TShark " VERSION "%s\n"
- "\n"
- "%s"
- "\n"
- "%s"
- "\n"
- "%s",
- wireshark_svnversion, get_copyright_info(), comp_info_str->str,
- runtime_info_str->str);
+ case 'v': /* Show version and exit */
+ {
+ GString *comp_info_str;
+ GString *runtime_info_str;
+ /* Assemble the compile-time version information string */
+ comp_info_str = g_string_new("Compiled ");
+ get_compiled_version_info(comp_info_str, get_epan_compiled_version_info);
+
+ /* Assemble the run-time version information string */
+ runtime_info_str = g_string_new("Running ");
+ get_runtime_version_info(runtime_info_str, NULL);
+ show_version(comp_info_str, runtime_info_str);
+ g_string_free(comp_info_str, TRUE);
+ g_string_free(runtime_info_str, TRUE);
exit(0);
break;
+ }
case 'V': /* Verbose */
verbose = TRUE;
break;
}
/* Build the column format array */
- col_setup(&cfile.cinfo, prefs->num_cols);
- for (i = 0; i < cfile.cinfo.num_cols; i++) {
- cfile.cinfo.col_fmt[i] = get_column_format(i);
- cfile.cinfo.col_title[i] = g_strdup(get_column_title(i));
- if (cfile.cinfo.col_fmt[i] == COL_CUSTOM) {
- cfile.cinfo.col_custom_field[i] = g_strdup(get_column_custom_field(i));
- if(!dfilter_compile(cfile.cinfo.col_custom_field[i], &cfile.cinfo.col_custom_dfilter[i])) {
- /* XXX: Should we issue a warning? */
- g_free(cfile.cinfo.col_custom_field[i]);
- cfile.cinfo.col_custom_field[i] = NULL;
- cfile.cinfo.col_custom_dfilter[i] = NULL;
- }
- } else {
- cfile.cinfo.col_custom_field[i] = NULL;
- cfile.cinfo.col_custom_dfilter[i] = NULL;
- }
- cfile.cinfo.fmt_matx[i] = (gboolean *) g_malloc0(sizeof(gboolean) *
- NUM_COL_FMTS);
- get_column_format_matches(cfile.cinfo.fmt_matx[i], cfile.cinfo.col_fmt[i]);
- cfile.cinfo.col_data[i] = NULL;
- if (cfile.cinfo.col_fmt[i] == COL_INFO)
- cfile.cinfo.col_buf[i] = (gchar *) g_malloc(sizeof(gchar) * COL_MAX_INFO_LEN);
- else
- cfile.cinfo.col_buf[i] = (gchar *) g_malloc(sizeof(gchar) * COL_MAX_LEN);
- cfile.cinfo.col_fence[i] = 0;
- cfile.cinfo.col_expr.col_expr[i] = (gchar *) g_malloc(sizeof(gchar) * COL_MAX_LEN);
- cfile.cinfo.col_expr.col_expr_val[i] = (gchar *) g_malloc(sizeof(gchar) * COL_MAX_LEN);
- }
-
- for (i = 0; i < cfile.cinfo.num_cols; i++) {
- int j;
-
- for (j = 0; j < NUM_COL_FMTS; j++) {
- if (!cfile.cinfo.fmt_matx[i][j])
- continue;
-
- if (cfile.cinfo.col_first[j] == -1)
- cfile.cinfo.col_first[j] = i;
- cfile.cinfo.col_last[j] = i;
- }
- }
+ build_column_format_array(&cfile.cinfo, prefs->num_cols, TRUE);
#ifdef HAVE_LIBPCAP
capture_opts_trim_snaplen(&global_capture_opts, MIN_PACKET_SIZE);
epan_cleanup();
exit(2);
}
- cf_name[0] = '\0';
} else {
/* No capture file specified, so we're supposed to do a live capture
(or get a list of link-layer types for a live capture device);
#endif
}
+ g_free(cf_name);
+
+#if GLIB_CHECK_VERSION(2,10,0)
+ if (cfile.plist_start != NULL)
+ g_slice_free_chain(frame_data, cfile.plist_start, next);
+#endif
+
draw_tap_listeners(TRUE);
funnel_dump_all_text_windows();
epan_cleanup();
relinquish_special_privs_perm();
print_current_user();
+ /* Cleanup all data structures used for dissection. */
+ cleanup_dissection();
/* Initialize all data structures used for dissection. */
init_dissection();
#endif /* _WIN32 */
#endif /* HAVE_LIBPCAP */
+#if GLIB_CHECK_VERSION(2,10,0)
+static gboolean
+process_packet_first_pass(capture_file *cf,
+ gint64 offset, const struct wtap_pkthdr *whdr,
+ union wtap_pseudo_header *pseudo_header, const guchar *pd)
+{
+ frame_data *fdata = g_slice_new(frame_data);
+ epan_dissect_t edt;
+ gboolean passed;
+
+ /* Count this packet. */
+ cf->count++;
+
+ /* If we're not running a display filter and we're not printing any
+ packet information, we don't need to do a dissection. This means
+ that all packets can be marked as 'passed'. */
+ passed = TRUE;
+
+ frame_data_init(fdata, cf->count, whdr, offset, cum_bytes);
+
+ /* If we're going to print packet information, or we're going to
+ run a read filter, or we're going to process taps, set up to
+ do a dissection and do so. */
+ if (do_dissection) {
+ if (g_resolv_flags)
+ /* Grab any resolved addresses */
+ host_name_lookup_process(NULL);
+
+ /* The protocol tree will be "visible", i.e., printed, only if we're
+ printing packet details, which is true if we're printing stuff
+ ("print_packet_info" is true) and we're in verbose mode ("verbose"
+ is true). */
+ epan_dissect_init(&edt, FALSE, FALSE);
+
+ /* If we're running a read filter, prime the epan_dissect_t with that
+ filter. */
+ if (cf->rfcode)
+ epan_dissect_prime_dfilter(&edt, cf->rfcode);
+
+ frame_data_set_before_dissect(fdata, &cf->elapsed_time,
+ &first_ts, &prev_dis_ts, &prev_cap_ts);
+
+ epan_dissect_run(&edt, pseudo_header, pd, fdata, NULL);
+
+ /* Run the read filter if we have one. */
+ if (cf->rfcode)
+ passed = dfilter_apply_edt(cf->rfcode, &edt);
+ }
+
+ if (passed) {
+ frame_data_set_after_dissect(fdata, &cum_bytes, &prev_dis_ts);
+ cap_file_add_fdata(cf, fdata);
+ }
+ else
+ g_slice_free(frame_data, fdata);
+
+ if (do_dissection)
+ epan_dissect_cleanup(&edt);
+
+ return passed;
+}
+
+static gboolean
+process_packet_second_pass(capture_file *cf, frame_data *fdata,
+ union wtap_pseudo_header *pseudo_header, const guchar *pd,
+ gboolean filtering_tap_listeners, guint tap_flags)
+{
+ gboolean create_proto_tree;
+ column_info *cinfo;
+ epan_dissect_t edt;
+ gboolean passed;
+
+ /* If we're not running a display filter and we're not printing any
+ packet information, we don't need to do a dissection. This means
+ that all packets can be marked as 'passed'. */
+ passed = TRUE;
+
+ /* If we're going to print packet information, or we're going to
+ run a read filter, or we're going to process taps, set up to
+ do a dissection and do so. */
+ if (do_dissection) {
+ if (g_resolv_flags)
+ /* Grab any resolved addresses */
+ host_name_lookup_process(NULL);
+
+ if (cf->rfcode || verbose || filtering_tap_listeners ||
+ (tap_flags & TL_REQUIRES_PROTO_TREE) || have_custom_cols(&cf->cinfo))
+ create_proto_tree = TRUE;
+ else
+ create_proto_tree = FALSE;
+
+ /* The protocol tree will be "visible", i.e., printed, only if we're
+ printing packet details, which is true if we're printing stuff
+ ("print_packet_info" is true) and we're in verbose mode ("verbose"
+ is true). */
+ epan_dissect_init(&edt, create_proto_tree, print_packet_info && verbose);
+
+ /* If we're running a read filter, prime the epan_dissect_t with that
+ filter. */
+ if (cf->rfcode)
+ epan_dissect_prime_dfilter(&edt, cf->rfcode);
+
+ col_custom_prime_edt(&edt, &cf->cinfo);
+
+ tap_queue_init(&edt);
+
+ /* We only need the columns if either
+
+ 1) some tap needs the columns
+
+ or
+
+ 2) we're printing packet info but we're *not* verbose; in verbose
+ mode, we print the protocol tree, not the protocol summary. */
+ if ((tap_flags & TL_REQUIRES_COLUMNS) || (print_packet_info && !verbose))
+ cinfo = &cf->cinfo;
+ else
+ cinfo = NULL;
+
+ epan_dissect_run(&edt, pseudo_header, pd, fdata, cinfo);
+
+ tap_push_tapped_queue(&edt);
+
+ /* Run the read filter if we have one. */
+ if (cf->rfcode)
+ passed = dfilter_apply_edt(cf->rfcode, &edt);
+ }
+
+ if (passed) {
+ /* Process this packet. */
+ if (print_packet_info) {
+ /* We're printing packet information; print the information for
+ this packet. */
+ if (do_dissection)
+ print_packet(cf, &edt);
+ else
+ print_packet(cf, NULL);
+
+ /* The ANSI C standard does not appear to *require* that a line-buffered
+ stream be flushed to the host environment whenever a newline is
+ written, it just says that, on such a stream, characters "are
+ intended to be transmitted to or from the host environment as a
+ block when a new-line character is encountered".
+
+ The Visual C++ 6.0 C implementation doesn't do what is intended;
+ even if you set a stream to be line-buffered, it still doesn't
+ flush the buffer at the end of every line.
+
+ So, if the "-l" flag was specified, we flush the standard output
+ at the end of a packet. This will do the right thing if we're
+ printing packet summary lines, and, as we print the entire protocol
+ tree for a single packet without waiting for anything to happen,
+ it should be as good as line-buffered mode if we're printing
+ protocol trees. (The whole reason for the "-l" flag in either
+ tcpdump or TShark is to allow the output of a live capture to
+ be piped to a program or script and to have that script see the
+ information for the packet as soon as it's printed, rather than
+ having to wait until a standard I/O buffer fills up. */
+ if (line_buffered)
+ fflush(stdout);
+
+ if (ferror(stdout)) {
+ show_print_file_io_error(errno);
+ exit(2);
+ }
+ }
+ }
+
+ if (do_dissection) {
+ epan_dissect_cleanup(&edt);
+ }
+ return passed;
+}
+#endif
+
static int
load_cap_file(capture_file *cf, char *save_file, int out_file_type,
int max_packet_count, gint64 max_byte_count)
/* Get the union of the flags for all tap listeners. */
tap_flags = union_of_tap_listener_flags();
- while (wtap_read(cf->wth, &err, &err_info, &data_offset)) {
- if (process_packet(cf, data_offset, wtap_phdr(cf->wth),
- wtap_pseudoheader(cf->wth), wtap_buf_ptr(cf->wth),
- filtering_tap_listeners, tap_flags)) {
- /* Either there's no read filtering or this packet passed the
- filter, so, if we're writing to a capture file, write
- this packet out. */
- if (pdh != NULL) {
- if (!wtap_dump(pdh, wtap_phdr(cf->wth),
- wtap_pseudoheader(cf->wth), wtap_buf_ptr(cf->wth),
- &err)) {
- /* Error writing to a capture file */
- show_capture_file_io_error(save_file, err, FALSE);
- wtap_dump_close(pdh, &err);
- exit(2);
+ if (perform_two_pass_analysis) {
+#if GLIB_CHECK_VERSION(2,10,0)
+ frame_data *fdata;
+ int old_max_packet_count = max_packet_count;
+
+ while (wtap_read(cf->wth, &err, &err_info, &data_offset)) {
+ if (process_packet_first_pass(cf, data_offset, wtap_phdr(cf->wth),
+ wtap_pseudoheader(cf->wth), wtap_buf_ptr(cf->wth))) {
+ /* Stop reading if we have the maximum number of packets;
+ * When the -c option has not been used, max_packet_count
+ * starts at 0, which practically means, never stop reading.
+ * (unless we roll over max_packet_count ?)
+ */
+ if( (--max_packet_count == 0) || (max_byte_count != 0 && data_offset >= max_byte_count)) {
+ err = 0; /* This is not an error */
+ break;
}
}
- /* Stop reading if we have the maximum number of packets;
- * When the -c option has not been used, max_packet_count
- * starts at 0, which practically means, never stop reading.
- * (unless we roll over max_packet_count ?)
- */
- if( (--max_packet_count == 0) || (max_byte_count != 0 && data_offset >= max_byte_count)) {
- err = 0; /* This is not an error */
- break;
+ }
+
+ /* Close the sequential I/O side, to free up memory it requires. */
+ wtap_sequential_close(cf->wth);
+
+ /* Allow the protocol dissectors to free up memory that they
+ * don't need after the sequential run-through of the packets. */
+ postseq_cleanup_all_protocols();
+
+ max_packet_count = old_max_packet_count;
+
+ for (fdata = cf->plist_start; err == 0 && fdata != NULL; fdata = fdata->next) {
+ if (wtap_seek_read(cf->wth, fdata->file_off, &cf->pseudo_header,
+ cf->pd, fdata->cap_len, &err, &err_info)) {
+ if (process_packet_second_pass(cf, fdata,
+ &cf->pseudo_header, cf->pd,
+ filtering_tap_listeners, tap_flags)) {
+ /* Either there's no read filtering or this packet passed the
+ filter, so, if we're writing to a capture file, write
+ this packet out. */
+ if (pdh != NULL) {
+ if (!wtap_dump(pdh, wtap_phdr(cf->wth),
+ wtap_pseudoheader(cf->wth), wtap_buf_ptr(cf->wth),
+ &err)) {
+ /* Error writing to a capture file */
+ show_capture_file_io_error(save_file, err, FALSE);
+ wtap_dump_close(pdh, &err);
+ exit(2);
+ }
+ }
+ /* Stop reading if we have the maximum number of packets;
+ * When the -c option has not been used, max_packet_count
+ * starts at 0, which practically means, never stop reading.
+ * (unless we roll over max_packet_count ?)
+ */
+ if( (--max_packet_count == 0) || (max_byte_count != 0 && data_offset >= max_byte_count)) {
+ err = 0; /* This is not an error */
+ break;
+ }
+ }
+ }
+ }
+#endif
+ }
+ else {
+ while (wtap_read(cf->wth, &err, &err_info, &data_offset)) {
+ if (process_packet(cf, data_offset, wtap_phdr(cf->wth),
+ wtap_pseudoheader(cf->wth), wtap_buf_ptr(cf->wth),
+ filtering_tap_listeners, tap_flags)) {
+ /* Either there's no read filtering or this packet passed the
+ filter, so, if we're writing to a capture file, write
+ this packet out. */
+ if (pdh != NULL) {
+ if (!wtap_dump(pdh, wtap_phdr(cf->wth),
+ wtap_pseudoheader(cf->wth), wtap_buf_ptr(cf->wth),
+ &err)) {
+ /* Error writing to a capture file */
+ show_capture_file_io_error(save_file, err, FALSE);
+ wtap_dump_close(pdh, &err);
+ exit(2);
+ }
+ }
+ /* Stop reading if we have the maximum number of packets;
+ * When the -c option has not been used, max_packet_count
+ * starts at 0, which practically means, never stop reading.
+ * (unless we roll over max_packet_count ?)
+ */
+ if( (--max_packet_count == 0) || (max_byte_count != 0 && data_offset >= max_byte_count)) {
+ err = 0; /* This is not an error */
+ break;
+ }
}
}
}
+
if (err != 0) {
/* Print a message noting that the read failed somewhere along the line. */
switch (err) {
return err;
}
-static void
-fill_in_fdata(frame_data *fdata, capture_file *cf,
- const struct wtap_pkthdr *phdr, gint64 offset)
-{
- fdata->next = NULL;
- fdata->prev = NULL;
- fdata->pfd = NULL;
- fdata->num = cf->count;
- fdata->pkt_len = phdr->len;
- cum_bytes += phdr->len;
- fdata->cum_bytes = cum_bytes;
- fdata->cap_len = phdr->caplen;
- fdata->file_off = offset;
- fdata->lnk_t = phdr->pkt_encap;
- fdata->abs_ts.secs = phdr->ts.secs;
- fdata->abs_ts.nsecs = phdr->ts.nsecs;
- fdata->flags.passed_dfilter = 0;
- fdata->flags.encoding = CHAR_ASCII;
- fdata->flags.visited = 0;
- fdata->flags.marked = 0;
- fdata->flags.ref_time = 0;
- fdata->color_filter = NULL;
-
- /* If we don't have the time stamp of the first packet in the
- capture, it's because this is the first packet. Save the time
- stamp of this packet as the time stamp of the first packet. */
- if (nstime_is_unset(&first_ts)) {
- first_ts = fdata->abs_ts;
- }
-
- /* If we don't have the time stamp of the previous captured packet,
- it's because this is the first packet. Save the time
- stamp of this packet as the time stamp of the previous captured
- packet. */
- if (nstime_is_unset(&prev_cap_ts)) {
- prev_cap_ts = fdata->abs_ts;
- }
-
- /* Get the time elapsed between the first packet and this packet. */
- nstime_delta(&fdata->rel_ts, &fdata->abs_ts, &first_ts);
-
- /* If it's greater than the current elapsed time, set the elapsed time
- to it (we check for "greater than" so as not to be confused by
- time moving backwards). */
- if ((gint32)cf->elapsed_time.secs < fdata->rel_ts.secs
- || ((gint32)cf->elapsed_time.secs == fdata->rel_ts.secs && (gint32)cf->elapsed_time.nsecs < fdata->rel_ts.nsecs)) {
- cf->elapsed_time = fdata->rel_ts;
- }
-
- /* If we don't have the time stamp of the previous displayed packet,
- it's because this is the first packet that's being displayed. Save the time
- stamp of this packet as the time stamp of the previous displayed
- packet. */
- if (nstime_is_unset(&prev_dis_ts))
- prev_dis_ts = fdata->abs_ts;
-
- /* Get the time elapsed between the previous displayed packet and
- this packet. */
- nstime_delta(&fdata->del_dis_ts, &fdata->abs_ts, &prev_dis_ts);
-
- /* Get the time elapsed between the previous captured packet and
- this packet. */
- nstime_delta(&fdata->del_cap_ts, &fdata->abs_ts, &prev_cap_ts);
- prev_cap_ts = fdata->abs_ts;
-}
-
-/* Free up all data attached to a "frame_data" structure. */
-static void
-clear_fdata(frame_data *fdata)
-{
- if (fdata->pfd)
- g_slist_free(fdata->pfd);
-}
-
static gboolean
process_packet(capture_file *cf, gint64 offset, const struct wtap_pkthdr *whdr,
union wtap_pseudo_header *pseudo_header, const guchar *pd,
frame_data fdata;
gboolean create_proto_tree;
column_info *cinfo;
- epan_dissect_t *edt;
+ epan_dissect_t edt;
gboolean passed;
/* Count this packet. */
cf->count++;
+ /* If we're not running a display filter and we're not printing any
+ packet information, we don't need to do a dissection. This means
+ that all packets can be marked as 'passed'. */
+ passed = TRUE;
+
+ frame_data_init(&fdata, cf->count, whdr, offset, cum_bytes);
+
/* If we're going to print packet information, or we're going to
run a read filter, or we're going to process taps, set up to
do a dissection and do so. */
if (do_dissection) {
- fill_in_fdata(&fdata, cf, whdr, offset);
-
- if (print_packet_info) {
+ if (print_packet_info && g_resolv_flags)
/* Grab any resolved addresses */
+ host_name_lookup_process(NULL);
- if (g_resolv_flags) {
- host_name_lookup_process(NULL);
- }
- }
-
- passed = TRUE;
if (cf->rfcode || verbose || filtering_tap_listeners ||
(tap_flags & TL_REQUIRES_PROTO_TREE) || have_custom_cols(&cf->cinfo))
create_proto_tree = TRUE;
else
create_proto_tree = FALSE;
+
/* The protocol tree will be "visible", i.e., printed, only if we're
printing packet details, which is true if we're printing stuff
("print_packet_info" is true) and we're in verbose mode ("verbose"
is true). */
- edt = epan_dissect_new(create_proto_tree, print_packet_info && verbose);
+ epan_dissect_init(&edt, create_proto_tree, print_packet_info && verbose);
/* If we're running a read filter, prime the epan_dissect_t with that
filter. */
if (cf->rfcode)
- epan_dissect_prime_dfilter(edt, cf->rfcode);
+ epan_dissect_prime_dfilter(&edt, cf->rfcode);
- col_custom_prime_edt(edt, &cf->cinfo);
+ col_custom_prime_edt(&edt, &cf->cinfo);
- tap_queue_init(edt);
+ tap_queue_init(&edt);
/* We only need the columns if either
cinfo = &cf->cinfo;
else
cinfo = NULL;
- epan_dissect_run(edt, pseudo_header, pd, &fdata, cinfo);
- tap_push_tapped_queue(edt);
+ frame_data_set_before_dissect(&fdata, &cf->elapsed_time,
+ &first_ts, &prev_dis_ts, &prev_cap_ts);
+
+ epan_dissect_run(&edt, pseudo_header, pd, &fdata, cinfo);
+
+ tap_push_tapped_queue(&edt);
/* Run the read filter if we have one. */
if (cf->rfcode)
- passed = dfilter_apply_edt(cf->rfcode, edt);
- else
- passed = TRUE;
- } else {
- /* We're not running a display filter and we're not printing any
- packet information, so we don't need to do a dissection, and all
- packets are processed. */
- edt = NULL;
- passed = TRUE;
+ passed = dfilter_apply_edt(cf->rfcode, &edt);
}
if (passed) {
- /* Keep the time of the current packet if the packet passed
- the read filter so that the delta time since last displayed
- packet can be calculated */
- prev_dis_ts = fdata.abs_ts;
+ frame_data_set_after_dissect(&fdata, &cum_bytes, &prev_dis_ts);
/* Process this packet. */
if (print_packet_info) {
/* We're printing packet information; print the information for
this packet. */
- print_packet(cf, edt);
+ if (do_dissection)
+ print_packet(cf, &edt);
+ else
+ print_packet(cf, NULL);
/* The ANSI C standard does not appear to *require* that a line-buffered
stream be flushed to the host environment whenever a newline is
}
if (do_dissection) {
- epan_dissect_free(edt);
- clear_fdata(&fdata);
+ epan_dissect_cleanup(&edt);
+ frame_data_cleanup(&fdata);
}
return passed;
}
-static void
-show_capture_file_io_error(const char *fname, int err, gboolean is_close)
-{
- char *save_file_string;
-
- save_file_string = output_file_description(fname);
-
- switch (err) {
-
- case ENOSPC:
- cmdarg_err("Not all the packets could be written to the %s because there is "
- "no space left on the file system.",
- save_file_string);
- break;
-
-#ifdef EDQUOT
- case EDQUOT:
- cmdarg_err("Not all the packets could be written to the %s because you are "
- "too close to, or over your disk quota.",
- save_file_string);
- break;
-#endif
-
- case WTAP_ERR_CANT_CLOSE:
- cmdarg_err("The %s couldn't be closed for some unknown reason.",
- save_file_string);
- break;
-
- case WTAP_ERR_SHORT_WRITE:
- cmdarg_err("Not all the packets could be written to the %s.",
- save_file_string);
- break;
-
- default:
- if (is_close) {
- cmdarg_err("The %s could not be closed: %s.", save_file_string,
- wtap_strerror(err));
- } else {
- cmdarg_err("An error occurred while writing to the %s: %s.",
- save_file_string, wtap_strerror(err));
- }
- break;
- }
- g_free(save_file_string);
-}
-
static gboolean
write_preamble(capture_file *cf)
{
}
} else {
/* Just fill in the columns. */
- epan_dissect_fill_in_columns(edt);
+ epan_dissect_fill_in_columns(edt, FALSE, TRUE);
/* Now print them. */
switch (output_action) {
}
}
+cf_status_t
+cf_open(capture_file *cf, const char *fname, gboolean is_tempfile, int *err)
+{
+ wtap *wth;
+ gchar *err_info;
+ char err_msg[2048+1];
+
+ wth = wtap_open_offline(fname, err, &err_info, perform_two_pass_analysis);
+ if (wth == NULL)
+ goto fail;
+
+ /* The open succeeded. Fill in the information for this file. */
+
+ /* Cleanup all data structures used for dissection. */
+ cleanup_dissection();
+ /* Initialize all data structures used for dissection. */
+ init_dissection();
+
+ cf->wth = wth;
+ cf->f_datalen = 0; /* not used, but set it anyway */
+
+ /* Set the file name because we need it to set the follow stream filter.
+ XXX - is that still true? We need it for other reasons, though,
+ in any case. */
+ cf->filename = g_strdup(fname);
+
+ /* Indicate whether it's a permanent or temporary file. */
+ cf->is_tempfile = is_tempfile;
+
+ /* If it's a temporary capture buffer file, mark it as not saved. */
+ cf->user_saved = !is_tempfile;
+
+ cf->cd_t = wtap_file_type(cf->wth);
+ cf->count = 0;
+ cf->drops_known = FALSE;
+ cf->drops = 0;
+ cf->snap = wtap_snapshot_length(cf->wth);
+ if (cf->snap == 0) {
+ /* Snapshot length not known. */
+ cf->has_snap = FALSE;
+ cf->snap = WTAP_MAX_PACKET_SIZE;
+ } else
+ cf->has_snap = TRUE;
+ nstime_set_zero(&cf->elapsed_time);
+ nstime_set_unset(&first_ts);
+ nstime_set_unset(&prev_dis_ts);
+ nstime_set_unset(&prev_cap_ts);
+
+ cf->state = FILE_READ_IN_PROGRESS;
+
+ return CF_OK;
+
+fail:
+ g_snprintf(err_msg, sizeof err_msg,
+ cf_open_error_message(*err, err_info, FALSE, cf->cd_t), fname);
+ cmdarg_err("%s", err_msg);
+ return CF_ERROR;
+}
+
+static void
+show_capture_file_io_error(const char *fname, int err, gboolean is_close)
+{
+ char *save_file_string;
+
+ save_file_string = output_file_description(fname);
+
+ switch (err) {
+
+ case ENOSPC:
+ cmdarg_err("Not all the packets could be written to the %s because there is "
+ "no space left on the file system.",
+ save_file_string);
+ break;
+
+#ifdef EDQUOT
+ case EDQUOT:
+ cmdarg_err("Not all the packets could be written to the %s because you are "
+ "too close to, or over your disk quota.",
+ save_file_string);
+ break;
+#endif
+
+ case WTAP_ERR_CANT_CLOSE:
+ cmdarg_err("The %s couldn't be closed for some unknown reason.",
+ save_file_string);
+ break;
+
+ case WTAP_ERR_SHORT_WRITE:
+ cmdarg_err("Not all the packets could be written to the %s.",
+ save_file_string);
+ break;
+
+ default:
+ if (is_close) {
+ cmdarg_err("The %s could not be closed: %s.", save_file_string,
+ wtap_strerror(err));
+ } else {
+ cmdarg_err("An error occurred while writing to the %s: %s.",
+ save_file_string, wtap_strerror(err));
+ }
+ break;
+ }
+ g_free(save_file_string);
+}
+
static void
show_print_file_io_error(int err)
{
fprintf(stderr, "\n");
}
-cf_status_t
-cf_open(capture_file *cf, const char *fname, gboolean is_tempfile, int *err)
-{
- wtap *wth;
- gchar *err_info;
- char err_msg[2048+1];
-
- wth = wtap_open_offline(fname, err, &err_info, FALSE);
- if (wth == NULL)
- goto fail;
-
- /* The open succeeded. Fill in the information for this file. */
-
- /* Initialize all data structures used for dissection. */
- init_dissection();
-
- cf->wth = wth;
- cf->f_datalen = 0; /* not used, but set it anyway */
-
- /* Set the file name because we need it to set the follow stream filter.
- XXX - is that still true? We need it for other reasons, though,
- in any case. */
- cf->filename = g_strdup(fname);
-
- /* Indicate whether it's a permanent or temporary file. */
- cf->is_tempfile = is_tempfile;
-
- /* If it's a temporary capture buffer file, mark it as not saved. */
- cf->user_saved = !is_tempfile;
-
- cf->cd_t = wtap_file_type(cf->wth);
- cf->count = 0;
- cf->drops_known = FALSE;
- cf->drops = 0;
- cf->snap = wtap_snapshot_length(cf->wth);
- if (cf->snap == 0) {
- /* Snapshot length not known. */
- cf->has_snap = FALSE;
- cf->snap = WTAP_MAX_PACKET_SIZE;
- } else
- cf->has_snap = TRUE;
- nstime_set_zero(&cf->elapsed_time);
- nstime_set_unset(&first_ts);
- nstime_set_unset(&prev_dis_ts);
- nstime_set_unset(&prev_cap_ts);
-
- cf->state = FILE_READ_IN_PROGRESS;
-
- return CF_OK;
-
-fail:
- g_snprintf(err_msg, sizeof err_msg,
- cf_open_error_message(*err, err_info, FALSE, cf->cd_t), fname);
- cmdarg_err("%s", err_msg);
- return CF_ERROR;
-}
-
/*
* General errors are reported with an console message in TShark.