#!/bin/sh
# Setup development environment on Mac OS X (tested with 10.6.8 and Xcode 3.2.6)
#
-# $Id$
+# Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file)
#
-# Trying to follow "Building Wireshark on SnowLeopard"
-# given by Michael Tuexen at
-# http://nplab.fh-muenster.de/groups/wiki/wiki/fb7a4/Building_Wireshark_on_SnowLeopard.html
+# Wireshark - Network traffic analyzer
+# By Gerald Combs <gerald@wireshark.org>
+# Copyright 1998 Gerald Combs
#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
+#
+# To install cmake
+#
+CMAKE=1
+#
+# To build all libraries as 32-bit libraries uncomment the following three lines.
+#
+# export CFLAGS="$CFLAGS -arch i386"
+# export CXXFLAGS="$CXXFLAGS -arch i386"
+# export LDFLAGS="$LDFLAGS -arch i386"
+#
+# and change "macx-clang" to "macx-clang-32" in the line below.
+#
+# Note: when building against the 10.6 SDK, clang fails, because there's
+# a missing libstdc++.dylib in the SDK; this does not bother g++, however.
+#
+#TARGET_PLATFORM=macx-g++
+TARGET_PLATFORM=macx-clang
#
-# To make this work on Leopard will take a lot of work.
+# Versions of packages to download and install.
#
-# First of all, Leopard's /usr/X11/lib/libXdamage.la claims, at least
-# with all software updates applied, that the Xdamage shared library
-# is libXdamage.1.0.0.dylib, but it is, in fact, libXdamage.1.1.0.dylib.
-# This causes problems when building GTK+, so the script would have to
-# fix that file.
+
#
-# Second of all, the version of fontconfig that comes with Leopard
-# doesn't support FC_WEIGHT_EXTRABLACK, so we can't use any version
-# of Pango newer than 1.22.4.
-#
-# However, Pango 1.22.4 doesn't work with versions of GLib after
-# 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and GLib 2.29.8
-# and later deprecate it (there doesn't appear to be a GLib 2.29.7).
-# That means we'd either have to patch Pango not to use it (just
-# use "const"; G_CONST_RETURN was there to allow code to choose whether
-# to use "const" or not), or use GLib 2.29.6 or earlier.
-#
-# GLib 2.29.6 includes an implementation of g_bit_lock() that, on x86
-# (32-bit and 64-bit), uses asms in a fashion ("asm volatile goto") that
-# doesn't work with the Apple version of GCC 4.0.1, which is the compiler
-# you get with Leopard+updates. Apparently, that requires GCC 4.5 or
-# later; recent versions of GLib check for that, but 2.29.6 doesn't.
-# Therefore, we would have to patch glib/gbitlock.c to do what the
-# newer versions of GLib do:
-#
-# define a USE_ASM_GOTO macro that indicates whether "asm goto"
-# can be used:
-# #if (defined (i386) || defined (__amd64__))
-# #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
-# #define USE_ASM_GOTO 1
-# #endif
-# #endif
-#
-# replace all occurrences of
-#
-# #if defined (__GNUC__) && (defined (i386) || defined (__amd64__))
-#
-# with
-#
-# #ifdef USE_ASM_GOTO
-#
-# Using GLib 2.29.6 or earlier, however, would mean that we can't
-# use a version of ATK later than 2.3.93, as those versions don't
-# work with GLib 2.29.6. The same applies to gdk-pixbuf; versions
-# of gdk-pixbuf after 2.24.1 won't work with GLib 2.29.6.
-#
-# Once you've set this script up to use the older versions of the
-# libraries, and built and installed them, you find that Wireshark,
-# when built with them, crashes the X server that comes with Leopard,
-# at least with all updates from Apple. Maybe patching Pango rather
-# than going with an older version of Pango would work.
-#
-# The Leopard Wireshark buildbot uses GTK+ 2.12.9, Cairo 1.6.4,
-# Pango 1.20.2, and GLib 2.16.3, with an unknown version of ATK,
-# and, I think, without gdk-pixbuf, as it hadn't been made a
-# separate library from GTK+ as of GTK+ 2.12.9. Its binaries
-# don't crash the X server.
-#
-# However, if you try various older versions of Cairo, including
-# 1.6.4 and at least some 1.8.x versions, when you try to build
-# it, the build fails because it can't find png_set_longjmp_fn().
-# I vaguely remember dealing with that, ages ago, but don't
-# remember what I did; fixing *that* is left as an exercise for
-# the reader.
-#
-# Oh, and if you're building with a version of GTK+ that doesn't
-# have the gdk-pixbuf stuff in a separate library, you probably
-# don't want to bother downloading or installing the gdk-pixbuf
-# library, *and* you will need to configure GTK+ with
-# --without-libtiff and --without-libjpeg (as we currently do
-# with gdk-pixbuf).
+# Some packages need xz to unpack their current source.
+# xz is not yet provided with OS X.
#
-if [[ $DARWIN_MAJOR_VERSION -le 9 ]]; then
- echo "This script does not support any versions of OS X before Snow Leopard" 1>&2
- exit 1
-fi
+XZ_VERSION=5.0.4
-# To set up a GTK3 environment
-# GTK3=1
-# To build cmake
-# CMAKE=1
-#
-# Versions to download and install.
-#
-# The following libraries and tools are required.
-#
-GETTEXT_VERSION=0.18.1.1
-GLIB_VERSION=2.32.3
-PKG_CONFIG_VERSION=0.27
-ATK_VERSION=2.4.0
-PANGO_VERSION=1.30.0
-PNG_VERSION=1.5.13
-PIXMAN_VERSION=0.26.0
-CAIRO_VERSION=1.12.2
-GDK_PIXBUF_VERSION=2.26.1
-if [ -z "$GTK3" ]; then
- GTK_VERSION=2.24.10
-else
- GTK_VERSION=3.5.2
-fi
+#
+# In case we want to build with cmake.
+#
+CMAKE_VERSION=2.8.12.2
#
-# Some package need xz to unpack their current source.
-# xz is not available on OSX (Snow Leopard).
+# The following libraries and tools are required even to build only TShark.
#
-XZ_VERSION=5.0.3
+GETTEXT_VERSION=0.18.2
+GLIB_VERSION=2.36.0
+PKG_CONFIG_VERSION=0.28
-# In case we want to build with cmake
-CMAKE_VERSION=2.8.8
+#
+# One or more of the following libraries are required to build Wireshark.
+#
+# If you don't want to build with Qt, comment out the QT_VERSION= line.
+#
+# If you want to build with GTK+ 2, comment out the GTK_VERSION=3.* line
+# and un-comment the GTK_VERSION=2.* line.
+#
+# If you don't want to build with GTK+ at all, comment out both lines.
+#
+QT_VERSION=5.2.1
+GTK_VERSION=2.24.17
+#GTK_VERSION=3.5.2
+if [ "$GTK_VERSION" ]; then
+ #
+ # We'll be building GTK+, so we need some additional libraries.
+ #
+ GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
+ GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+
+ ATK_VERSION=2.8.0
+ PANGO_VERSION=1.30.1
+ PNG_VERSION=1.5.17
+ PIXMAN_VERSION=0.26.0
+ CAIRO_VERSION=1.12.2
+ GDK_PIXBUF_VERSION=2.28.0
+fi
+# In case we want to build GTK *and* we don't have Apple's X11 SDK installed
+# we may want to install XQuartz. The version will only be used in the printing
+# of a URL, the package will not be installed.
+#
+XQUARTZ_VERSION=2.7.5
#
# The following libraries are optional.
# Comment them out if you don't want them, but note that some of
LIBGPG_ERROR_VERSION=1.10
#
# libgcrypt is required for GnuTLS.
-# XXX - the link for "Libgcrypt source code" at
-# http://www.gnupg.org/download/#libgcrypt is for 1.5.0, and is a bzip2
-# file, but http://directory.fsf.org/project/libgcrypt/ lists only
-# 1.4.6.
#
LIBGCRYPT_VERSION=1.5.0
GNUTLS_VERSION=2.12.19
-# Stay with Lua 5.1 when updating until the code has been changed
-# to support 5.2
-LUA_VERSION=5.1.5
+# Use 5.2.3, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3
+# yet, and we need to check for compatibility issues (we'd want Lua
+# scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua
+# features present in all three versions)
+LUA_VERSION=5.2.3
PORTAUDIO_VERSION=pa_stable_v19_20111121
#
# XXX - they appear to have an unversioned gzipped tarball for the
#
GEOIP_VERSION=1.4.8
-#
-# You need Xcode installed to get the compilers.
-#
-if [ ! -x /usr/bin/xcodebuild ]; then
- echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
- exit 1
-fi
+CARES_VERSION=1.10.0
+
+DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
#
-# You also need the X11 SDK; with at least some versions of OS X and
-# Xcode, that is, I think, an optional install. (Or it might be
-# installed with X11, but I think *that* is an optional install on
-# at least some versions of OS X.)
+# GNU autotools; they're provided with releases up to Snow Leopard, but
+# not in later releases.
#
-if [ ! -d /usr/X11/include ]; then
- echo "Please install X11 and the X11 SDK first."
- exit 1
+if [[ $DARWIN_MAJOR_VERSION -gt 10 ]]; then
+ AUTOCONF_VERSION=2.69
+ AUTOMAKE_VERSION=1.13.3
+ LIBTOOL_VERSION=2.4.2
fi
+install_xz() {
+ if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then
+ echo "Downloading, building, and installing xz:"
+ [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
+ bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1
+ cd xz-$XZ_VERSION
+ CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch xz-$XZ_VERSION-done
+ fi
+}
+
+uninstall_xz() {
+ if [ ! -z "$installed_xz_version" ] ; then
+ echo "Uninstalling xz:"
+ cd xz-$installed_xz_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm xz-$installed_xz_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf xz-$installed_xz_version
+ rm -rf xz-$installed_xz_version.tar.bz2
+ fi
+
+ installed_xz_version=""
+ fi
+}
+
+install_autoconf() {
+ if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then
+ echo "Downloading, building and installing GNU autoconf..."
+ [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1
+ xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1
+ cd autoconf-$AUTOCONF_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch autoconf-$AUTOCONF_VERSION-done
+ fi
+}
+
+uninstall_autoconf() {
+ if [ ! -z "$installed_autoconf_version" ] ; then
+ #
+ # automake and libtool depend on this, so uninstall them.
+ #
+ uninstall_libtool
+ uninstall_automake
+
+ echo "Uninstalling GNU autoconf:"
+ cd autoconf-$installed_autoconf_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm autoconf-$installed_autoconf_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf autoconf-$installed_autoconf_version
+ rm -rf autoconf-$installed_autoconf_version.tar.xz
+ fi
+
+ installed_autoconf_version=""
+ fi
+}
+
+install_automake() {
+ if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then
+ echo "Downloading, building and installing GNU automake..."
+ [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1
+ xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1
+ cd automake-$AUTOMAKE_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch automake-$AUTOMAKE_VERSION-done
+ fi
+}
+
+uninstall_automake() {
+ if [ ! -z "$installed_automake_version" ] ; then
+ #
+ # libtool depends on this(?), so uninstall it.
+ #
+ uninstall_automake "$@"
+
+ echo "Uninstalling GNU automake:"
+ cd automake-$installed_automake_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm automake-$installed_automake_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf automake-$installed_automake_version
+ rm -rf automake-$installed_automake_version.tar.xz
+ fi
+
+ installed_automake_version=""
+ fi
+}
+
+install_libtool() {
+ if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then
+ echo "Downloading, building and installing GNU libtool..."
+ [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1
+ xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1
+ cd libtool-$LIBTOOL_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ $DO_MV /usr/local/bin/libtool /usr/local/bin/glibtool
+ $DO_MV /usr/local/bin/libtoolize /usr/local/bin/glibtoolize
+ cd ..
+ touch libtool-$LIBTOOL_VERSION-done
+ fi
+}
+
+uninstall_libtool() {
+ if [ ! -z "$installed_libtool_version" ] ; then
+ echo "Uninstalling GNU libtool:"
+ cd libtool-$installed_libtool_version
+ $DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool
+ $DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm libtool-$installed_libtool_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf libtool-$installed_libtool_version
+ rm -rf libtool-$installed_libtool_version.tar.xz
+ fi
+
+ installed_libtool_version=""
+ fi
+}
+
+install_cmake() {
+ if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then
+ echo "Downloading and installing CMake:"
+ cmake_dir=`expr $CMAKE_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ #
+ # NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the
+ # package in question supports both 32-bit and 64-bit x86.
+ #
+ [ -f cmake-$CMAKE_VERSION-Darwin64-universal.dmg ] || curl -O http://www.cmake.org/files/v$cmake_dir/cmake-$CMAKE_VERSION-Darwin64-universal.dmg || exit 1
+ sudo hdiutil attach http://www.cmake.org/files/v2.8/cmake-$CMAKE_VERSION-Darwin64-universal.dmg || exit 1
+ sudo installer -target / -pkg /Volumes/cmake-$CMAKE_VERSION-Darwin64-universal/cmake-$CMAKE_VERSION-Darwin64-universal.pkg || exit 1
+ sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-Darwin64-universal
+ touch cmake-$CMAKE_VERSION-done
+ fi
+}
+
+uninstall_cmake() {
+ if [ ! -z "$installed_cmake_version" ]; then
+ echo "Uninstalling CMake:"
+ sudo rm -rf "/Applications/CMake "`echo "$installed_cmake_version" | sed 's/\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*/\1.\2-\3/'`.app
+ sudo rm /usr/bin/ccmake
+ sudo rm /usr/bin/cmake
+ sudo rm /usr/bin/cmake-gui
+ sudo rm /usr/bin/cmakexbuild
+ sudo rm /usr/bin/cpack
+ sudo rm /usr/bin/ctest
+ sudo pkgutil --forget com.Kitware.CMake
+ rm cmake-$installed_cmake_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -f cmake-$installed_cmake_version-Darwin64-universal.dmg
+ fi
+
+ installed_cmake_version=""
+ fi
+}
+
+install_gettext() {
+ if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then
+ echo "Downloading, building, and installing GNU gettext:"
+ [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
+ gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1
+ cd gettext-$GETTEXT_VERSION
+ CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gettext-$GETTEXT_VERSION-done
+ fi
+}
+
+uninstall_gettext() {
+ if [ ! -z "$installed_gettext_version" ] ; then
+ #
+ # GLib depends on this, so uninstall it.
+ #
+ uninstall_glib "$@"
+
+ echo "Uninstalling GNU gettext:"
+ cd gettext-$installed_gettext_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm gettext-$installed_gettext_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf gettext-$installed_gettext_version
+ rm -rf gettext-$installed_gettext_version.tar.gz
+ fi
+
+ installed_gettext_version=""
+ fi
+}
+
+install_pkg_config() {
+ if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then
+ echo "Downloading, building, and installing pkg-config:"
+ [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -O http://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
+ gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1
+ cd pkg-config-$PKG_CONFIG_VERSION
+ ./configure --with-internal-glib || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pkg-config-$PKG_CONFIG_VERSION-done
+ fi
+}
+
+uninstall_pkg_config() {
+ if [ ! -z "$installed_pkg_config_version" ] ; then
+ echo "Uninstalling pkg-config:"
+ cd pkg-config-$installed_pkg_config_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm pkg-config-$installed_pkg_config_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf pkg-config-$installed_pkg_config_version
+ rm -rf pkg-config-$installed_pkg_config_version.tar.gz
+ fi
+
+ installed_pkg_config_version=""
+ fi
+}
+
+install_glib() {
+ if [ ! -f glib-$GLIB_VERSION-done ] ; then
+ echo "Downloading, building, and installing GLib:"
+ glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`"
+ GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $GLIB_MAJOR_VERSION -gt 2 ||
+ $GLIB_MINOR_VERSION -gt 28 ||
+ ($GLIB_MINOR_VERSION -eq 28 && $GLIB_DOTDOT_VERSION -ge 8) ]]
+ then
+ #
+ # Starting with GLib 2.28.8, xz-compressed tarballs are available.
+ #
+ [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
+ xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f glib-$GLIB_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.bz2 || exit 1
+ bzcat glib-$GLIB_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd glib-$GLIB_VERSION
+ #
+ # OS X ships with libffi, but doesn't provide its pkg-config file;
+ # explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure
+ # script doesn't try to use pkg-config to get the appropriate
+ # C flags and loader flags.
+ #
+ # And, what's worse, at least with the version of Xcode that comes
+ # with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
+ # which causes the build of GLib to fail. If we don't find
+ # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explicitly
+ # define it.
+ #
+ # While we're at it, suppress -Wformat-nonliteral to avoid a case
+ # where clang's stricter rules on when not to complain about
+ # non-literal format arguments cause it to complain about code
+ # that's safe but it wasn't told that. See my comment #25 in
+ # GNOME bug 691608:
+ #
+ # https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25
+ #
+ # First, determine where the system include files are. (It's not
+ # necessarily /usr/include.) There's a bit of a greasy hack here;
+ # pre-5.x versions of the developer tools don't support the
+ # --show-sdk-path option, and will produce no output, so includedir
+ # will be set to /usr/include (in those older versions of the
+ # developer tools, there is a /usr/include directory).
+ #
+ includedir=`xcrun --show-sdk-path 2>/dev/null`/usr/include
+ if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h
+ then
+ # It's defined, nothing to do
+ LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ else
+ LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ fi
+
+ #
+ # Apply the fix to GNOME bug 529806:
+ #
+ # https://bugzilla.gnome.org/show_bug.cgi?id=529806
+ #
+ # if we have a version of GLib prior to 2.30.
+ #
+ if [[ $GLIB_MAJOR_VERSION -eq 2 && $GLIB_MINOR_VERSION -le 30 ]]
+ then
+ patch -p0 <../../macosx-support-lib-patches/glib-gconvert.c.patch || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch glib-$GLIB_VERSION-done
+ fi
+}
+
+uninstall_glib() {
+ if [ ! -z "$installed_glib_version" ] ; then
+ #
+ # ATK, Pango, and GTK depend on this, so uninstall them.
+ #
+ uninstall_gtk
+ uninstall_pango
+ uninstall_atk
+
+ echo "Uninstalling GLib:"
+ cd glib-$installed_glib_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm glib-$installed_glib_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf glib-$installed_glib_version
+ rm -rf glib-$installed_glib_version.tar.xz glib-$installed_glib_version.tar.bz2
+ fi
+
+ installed_glib_version=""
+ fi
+}
+
+install_qt() {
+ if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
+ echo "Downloading, building, and installing Qt:"
+ QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
+ QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
+ #
+ # What you get for this URL might just be a 302 Found reply, so use
+ # -L so we get redirected.
+ #
+ curl -L -O http://download.qt-project.org/official_releases/qt/$QT_MAJOR_MINOR_VERSION/$QT_VERSION/single/qt-everywhere-opensource-src-$QT_VERSION.tar.gz
+ #
+ # Qt 5.1.x sets QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.6
+ # in qtbase/mkspecs/$TARGET_PLATFORM/qmake.conf
+ # We may need to adjust this manually in the future.
+ #
+ # The -no-c++11 flag is needed to work around
+ # https://bugreports.qt-project.org/browse/QTBUG-30487
+ #
+ tar xf qt-everywhere-opensource-src-$QT_VERSION.tar.gz
+ cd qt-everywhere-opensource-src-$QT_VERSION
+ #
+ # We don't build Qt in its Full Shining Glory, as we don't need all
+ # of its components, and it takes *forever* to build in that form.
+ #
+ # Qt 5.2.0 beta1 fails to build on OS X without -no-xcb due to bug
+ # QTBUG-34382.
+ #
+ # Qt 5.x fails to build on OS X with -no-opengl due to bug
+ # QTBUG-31151.
+ #
+ ./configure -v $qt_sdk_arg -platform $TARGET_PLATFORM \
+ -opensource -confirm-license -no-c++11 -no-dbus \
+ -no-sql-sqlite -no-xcb -nomake examples \
+ -skip qtdoc -skip qtquickcontrols -skip qtwebkit \
+ -skip qtwebkit-examples -skip qtxmlpatterns
+ make || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch qt-$QT_VERSION-done
+ fi
+}
+
+uninstall_qt() {
+ if [ ! -z "$installed_qt_version" ] ; then
+ echo "Uninstalling Qt:"
+ cd qt-everywhere-opensource-src-$installed_qt_version
+ $DO_MAKE_UNINSTALL || exit 1
+ #
+ # XXX - "make distclean" doesn't work. qmake sure does a
+ # good job of constructing Makefiles that work correctly....
+ #
+ #make distclean || exit 1
+ cd ..
+ rm qt-$installed_qt_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf qt-everywhere-opensource-src-$installed_qt_version
+ rm -rf qt-everywhere-opensource-src-$installed_qt_version.tar.gz
+ fi
+
+ installed_qt_version=""
+ fi
+}
+
+install_libpng() {
+ if [ ! -f libpng-$PNG_VERSION-done ] ; then
+ echo "Downloading, building, and installing libpng:"
+ #
+ # The FTP site puts libpng x.y.* into a libpngxy directory.
+ #
+ subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
+ [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
+ xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
+ cd libpng-$PNG_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libpng-$PNG_VERSION-done
+ fi
+}
+
+uninstall_libpng() {
+ if [ ! -z "$installed_libpng_version" ] ; then
+ #
+ # Cairo depends on this, so uninstall it.
+ #
+ uninstall_cairo "$@"
+
+ echo "Uninstalling libpng:"
+ cd libpng-$installed_libpng_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm libpng-$installed_libpng_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf libpng-$installed_libpng_version
+ rm -rf libpng-$installed_libpng_version.tar.xz
+ fi
+
+ installed_libpng_version=""
+ fi
+}
+
+install_pixman() {
+ if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
+ echo "Downloading, building, and installing pixman:"
+ [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
+ gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
+ cd pixman-$PIXMAN_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pixman-$PIXMAN_VERSION-done
+ fi
+}
+
+uninstall_pixman() {
+ if [ ! -z "$installed_pixman_version" ] ; then
+ #
+ # Cairo depends on this, so uninstall it.
+ #
+ uninstall_cairo "$@"
+
+ echo "Uninstalling pixman:"
+ cd pixman-$installed_pixman_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm pixman-$installed_pixman_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf pixman-$installed_pixman_version
+ rm -rf pixman-$installed_pixman_version.tar.gz
+ fi
+
+ installed_pixman_version=""
+ fi
+}
+
+install_cairo() {
+ if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
+ echo "Downloading, building, and installing Cairo:"
+ CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
+ CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
+ $CAIRO_MINOR_VERSION -gt 12 ||
+ ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
+ then
+ #
+ # Starting with Cairo 1.12.2, the tarballs are compressed with
+ # xz rather than gzip.
+ #
+ [ -f cairo-$CAIRO_VERSION.tar.xz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
+ xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f cairo-$CAIRO_VERSION.tar.gz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
+ gzcat cairo-$CAIRO_VERSION.tar.gz | tar xf - || exit 1
+ fi
+ cd cairo-$CAIRO_VERSION
+ # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=no || exit 1
+ # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=yes || exit 1
+ #
+ # We must avoid the version of libpng that comes with X11; the
+ # only way I've found to force that is to forcibly set INCLUDES
+ # when we do the build, so that this comes before CAIRO_CFLAGS,
+ # which has -I/usr/X11/include added to it before anything
+ # connected to libpng is.
+ #
+ INCLUDES="-I/usr/local/include/libpng15" make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch cairo-$CAIRO_VERSION-done
+ fi
+}
+
+uninstall_cairo() {
+ if [ ! -z "$installed_cairo_version" ] ; then
+ #
+ # GTK+ depends on this, so uninstall it.
+ #
+ uninstall_gtk "$@"
+
+ echo "Uninstalling Cairo:"
+ cd cairo-$installed_cairo_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm cairo-$installed_cairo_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf cairo-$installed_cairo_version
+ rm -rf cairo-$installed_cairo_version.tar.xz cairo-$installed_cairo_version.tar.gz
+ fi
+
+ installed_cairo_version=""
+ fi
+}
+
+install_atk() {
+ if [ ! -f atk-$ATK_VERSION-done ] ; then
+ echo "Downloading, building, and installing ATK:"
+ atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ ATK_MAJOR_VERSION="`expr $ATK_VERSION : '\([0-9][0-9]*\).*'`"
+ ATK_MINOR_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ ATK_DOTDOT_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $ATK_MAJOR_VERSION -gt 2 ||
+ ($ATK_MAJOR_VERSION -eq 2 && $ATK_MINOR_VERSION -gt 0) ||
+ ($ATK_MANOR_VERSION -eq 2 && $ATK_MINOR_VERSION -eq 0 && $ATK_DOTDOT_VERSION -ge 1) ]]
+ then
+ #
+ # Starting with ATK 2.0.1, xz-compressed tarballs are available.
+ #
+ [ -f atk-$ATK_VERSION.tar.xz ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
+ xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f atk-$ATK_VERSION.tar.bz2 ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.bz2 || exit 1
+ bzcat atk-$ATK_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd atk-$ATK_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch atk-$ATK_VERSION-done
+ fi
+}
+
+uninstall_atk() {
+ if [ ! -z "$installed_atk_version" ] ; then
+ #
+ # GTK+ depends on this, so uninstall it.
+ #
+ uninstall_gtk "$@"
+
+ echo "Uninstalling ATK:"
+ cd atk-$installed_atk_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm atk-$installed_atk_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf atk-$installed_atk_version
+ rm -rf atk-$installed_atk_version.tar.xz atk-$installed_atk_version.tar.bz2
+ fi
+
+ installed_atk_version=""
+ fi
+}
+
+install_pango() {
+ if [ ! -f pango-$PANGO_VERSION-done ] ; then
+ echo "Downloading, building, and installing Pango:"
+ pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
+ PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $PANGO_MAJOR_VERSION -gt 1 ||
+ $PANGO_MINOR_VERSION -ge 29 ]]
+ then
+ #
+ # Starting with Pango 1.29, the tarballs are compressed with
+ # xz rather than bzip2.
+ #
+ [ -f pango-$PANGO_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz || exit 1
+ xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f pango-$PANGO_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2 || exit 1
+ bzcat pango-$PANGO_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd pango-$PANGO_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pango-$PANGO_VERSION-done
+ fi
+}
+
+uninstall_pango() {
+ if [ ! -z "$installed_pango_version" ] ; then
+ #
+ # GTK+ depends on this, so uninstall it.
+ #
+ uninstall_gtk "$@"
+
+ echo "Uninstalling Pango:"
+ cd pango-$installed_pango_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm pango-$installed_pango_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf pango-$installed_pango_version
+ rm -rf pango-$installed_pango_version.tar.xz pango-$installed_pango_version.tar.bz2
+ fi
+
+ installed_pango_version=""
+ fi
+}
+
+install_gdk_pixbuf() {
+ if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then
+ echo "Downloading, building, and installing gdk-pixbuf:"
+ gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ [ -f gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
+ xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
+ cd gdk-pixbuf-$GDK_PIXBUF_VERSION
+ #
+ # If we're building using the 10.6 SDK, force the use of libpng12.
+ #
+ # The OS's X11, and corresponding SDK, didn't introduce libpng15,
+ # or pkg-config files, until 10.7, so, for 10.6 have to explicitly
+ # set LIBPNG to override the configure script, and also force the
+ # CFLAGS to look for the header files for libpng12 (note that
+ # -isysroot doesn't affect the arguments to -I, so we need to
+ # include the SDK path explicitly).
+ #
+ if [[ "$sdk_target" = 10.6 ]]
+ then
+ LIBPNG="-L/usr/X11/lib -lpng12" CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ else
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gdk-pixbuf-$GDK_PIXBUF_VERSION-done
+ fi
+}
+
+uninstall_gdk_pixbuf() {
+ if [ ! -z "$installed_gdk_pixbuf_version" ] ; then
+ #
+ # GTK+ depends on this, so uninstall it.
+ #
+ uninstall_gtk "$@"
+
+ echo "Uninstalling gdk-pixbuf:"
+ cd gdk-pixbuf-$installed_gdk_pixbuf_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm gdk-pixbuf-$installed_gdk_pixbuf_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf gdk-pixbuf-$installed_gdk_pixbuf_version
+ rm -rf gdk-pixbuf-$installed_gdk_pixbuf_version.tar.xz
+ fi
+
+ installed_gdk_pixbuf_version=""
+ fi
+}
+
+install_gtk() {
+ if [ ! -f gtk+-$GTK_VERSION-done ] ; then
+ echo "Downloading, building, and installing GTK+:"
+ gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ if [[ $GTK_MAJOR_VERSION -gt 2 ||
+ $GTK_MINOR_VERSION -gt 24 ||
+ ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
+ then
+ #
+ # Starting with GTK+ 2.24.5, the tarballs are compressed with
+ # xz rather than gzip, in addition to bzip2; use xz, as we've
+ # built and installed it, and as xz compresses better than
+ # bzip2 so the tarballs take less time to download.
+ #
+ [ -f gtk+-$GTK_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz || exit 1
+ xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f gtk+-$GTK_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2 || exit 1
+ bzcat gtk+-$GTK_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd gtk+-$GTK_VERSION
+ if [ $DARWIN_MAJOR_VERSION -ge "12" ]
+ then
+ #
+ # GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
+ # CUPS printing backend - either the CUPS API changed incompatibly
+ # or the backend was depending on non-API implementation details.
+ #
+ # Configure it out, on Mountain Lion and later, for now.
+ # (12 is the Darwin major version number in Mountain Lion.)
+ #
+ # Also, configure out libtiff and libjpeg; configure scripts
+ # just ignore unknown --enable/--disable and --with/--without
+ # options (at least they've always do so up to now).
+ #
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups --without-libtiff --without-libjpeg || exit 1
+ else
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gtk+-$GTK_VERSION-done
+ fi
+}
+
+uninstall_gtk() {
+ if [ ! -z "$installed_gtk_version" ] ; then
+ echo "Uninstalling GTK+:"
+ cd gtk+-$installed_gtk_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm gtk+-$installed_gtk_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf gtk+-$installed_gtk_version
+ rm -rf gtk+-$installed_gtk_version.tar.xz gtk+-$installed_gtk_version.tar.bz2
+ fi
+
+ installed_gtk_version=""
+ fi
+}
+
+install_libsmi() {
+ if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then
+ echo "Downloading, building, and installing libsmi:"
+ [ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
+ gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1
+ cd libsmi-$LIBSMI_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libsmi-$LIBSMI_VERSION-done
+ fi
+}
+
+uninstall_libsmi() {
+ if [ ! -z "$installed_libsmi_version" ] ; then
+ echo "Uninstalling libsmi:"
+ cd libsmi-$installed_libsmi_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm libsmi-$installed_libsmi_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf libsmi-$installed_libsmi_version
+ rm -rf libsmi-$installed_libsmi_version.tar.gz
+ fi
+
+ installed_libsmi_version=""
+ fi
+}
+
+install_libgpg_error() {
+ if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then
+ echo "Downloading, building, and installing libgpg-error:"
+ [ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
+ bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
+ cd libgpg-error-$LIBGPG_ERROR_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libgpg-error-$LIBGPG_ERROR_VERSION-done
+ fi
+}
+
+uninstall_libgpg_error() {
+ if [ ! -z "$installed_libgpg_error_version" ] ; then
+ #
+ # libgcrypt depends on this, so uninstall it.
+ #
+ uninstall_libgcrypt "$@"
+
+ echo "Uninstalling libgpg-error:"
+ cd libgpg-error-$installed_libgpg_error_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm libgpg-error-$installed_libgpg_error_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf libgpg-error-$installed_libgpg_error_version
+ rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2
+ fi
+
+ installed_libgpg_error_version=""
+ fi
+}
+
+install_libgcrypt() {
+ if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then
+ #
+ # libgpg-error is required for libgcrypt.
+ #
+ if [ -z $LIBGPG_ERROR_VERSION ]
+ then
+ echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2
+ exit 1
+ fi
+
+ echo "Downloading, building, and installing libgcrypt:"
+ [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
+ gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1
+ cd libgcrypt-$LIBGCRYPT_VERSION
+ #
+ # The assembler language code is not compatible with the OS X
+ # x86 assembler (or is it an x86-64 vs. x86-32 issue?).
+ #
+ # libgcrypt expects gnu89, not c99/gnu99, semantics for
+ # "inline". See, for example:
+ #
+ # http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html
+ #
+ CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libgcrypt-$LIBGCRYPT_VERSION-done
+ fi
+}
+
+uninstall_libgcrypt() {
+ if [ ! -z "$installed_libgcrypt_version" ] ; then
+ #
+ # GnuTLS depends on this, so uninstall it.
+ #
+ uninstall_gnutls "$@"
+
+ echo "Uninstalling libgcrypt:"
+ cd libgcrypt-$installed_libgcrypt_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm libgcrypt-$installed_libgcrypt_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf libgcrypt-$installed_libgcrypt_version
+ rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz
+ fi
+
+ installed_libgcrypt_version=""
+ fi
+}
+
+install_gnutls() {
+ if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then
+ #
+ # GnuTLS requires libgcrypt (or nettle, in newer versions).
+ #
+ if [ -z $LIBGCRYPT_VERSION ]
+ then
+ echo "GnuTLS requires libgcrypt, but you didn't install libgcrypt" 1>&2
+ exit 1
+ fi
+
+ echo "Downloading, building, and installing GnuTLS:"
+ [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnu.org/gnu/gnutls/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
+ bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
+ cd gnutls-$GNUTLS_VERSION
+ #
+ # Use libgcrypt, not nettle.
+ # XXX - is there some reason to prefer nettle? Or does
+ # Wireshark directly use libgcrypt routines?
+ #
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-libgcrypt --without-p11-kit || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ #
+ # The pkgconfig file for GnuTLS says "requires zlib", but OS X,
+ # while it supplies zlib, doesn't supply a pkgconfig file for
+ # it.
+ #
+ # Patch the GnuTLS pkgconfig file not to require zlib.
+ # (If the capabilities of GnuTLS that Wireshark uses don't
+ # depend on building GnuTLS with zlib, an alternative would be
+ # to configure it not to use zlib.)
+ #
+ patch -p0 lib/gnutls.pc.in <../../macosx-support-lib-patches/gnutls-pkgconfig.patch || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gnutls-$GNUTLS_VERSION-done
+ fi
+}
+
+uninstall_gnutls() {
+ if [ ! -z "$installed_gnutls_version" ] ; then
+ echo "Uninstalling GnuTLS:"
+ cd gnutls-$installed_gnutls_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm gnutls-$installed_gnutls_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf gnutls-$installed_gnutls_version
+ rm -rf gnutls-$installed_gnutls_version.tar.bz2
+ fi
+
+ installed_gnutls_version=""
+ fi
+}
+
+install_lua() {
+ if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then
+ echo "Downloading, building, and installing Lua:"
+ [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
+ gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1
+ cd lua-$LUA_VERSION
+ make $MAKE_BUILD_OPTS macosx || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch lua-$LUA_VERSION-done
+ fi
+}
+
+uninstall_lua() {
+ if [ ! -z "$installed_lua_version" ] ; then
+ echo "Uninstalling Lua:"
+ #
+ # Lua has no "make uninstall", so just remove stuff manually.
+ # There's no configure script, so there's no need for
+ # "make distclean", either; just do "make clean".
+ #
+ (cd /usr/local/bin; $DO_RM -f lua luac)
+ (cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp)
+ (cd /usr/local/lib; $DO_RM -f liblua.a)
+ (cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1)
+ cd lua-$installed_lua_version
+ make clean || exit 1
+ cd ..
+ rm lua-$installed_lua_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf lua-$installed_lua_version
+ rm -rf lua-$installed_lua_version.tar.gz
+ fi
+
+ installed_lua_version=""
+ fi
+}
+
+install_portaudio() {
+ #
+ # Check for both the old versionless portaudio-done and the new
+ # versioned -done file.
+ #
+ if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-$PORTAUDIO_VERSION-done ] ; then
+ echo "Downloading, building, and installing PortAudio:"
+ [ -f $PORTAUDIO_VERSION.tgz ] || curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1
+ gzcat $PORTAUDIO_VERSION.tgz | tar xf - || exit 1
+ cd portaudio
+ #
+ # Un-comment an include that's required on Lion.
+ #
+ patch -p0 include/pa_mac_core.h <../../macosx-support-lib-patches/portaudio-pa_mac_core.h.patch
+ #
+ # Fix a bug that showed up with clang (but is a bug with any
+ # compiler).
+ #
+ patch -p0 src/hostapi/coreaudio/pa_mac_core.c <../../macosx-support-lib-patches/portaudio-pa_mac_core.c.patch
+ #
+ # Disable fat builds - the configure script doesn't work right
+ # with Xcode 4 if you leave them enabled, and we don't build
+ # any other libraries fat (GLib, for example, would be very
+ # hard to build fat), so there's no advantage to having PortAudio
+ # built fat.
+ #
+ # Set the minimum OS X version to 10.4, to suppress some
+ # deprecation warnings. (Good luck trying to make any of
+ # this build on an OS+Xcode with a pre-10.4 SDK; we don't
+ # worry about the user requesting that.)
+ #
+ CFLAGS="$CFLAGS -mmacosx-version-min=10.4 $SDKFLAGS" CXXFLAGS="$CXXFLAGS -mmacosx-version-min=10.4 $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-mac-universal || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch portaudio-$PORTAUDIO_VERSION-done
+ fi
+}
+
+uninstall_portaudio() {
+ if [ ! -z "$installed_portaudio_version" ] ; then
+ echo "Uninstalling PortAudio:"
+ cd portaudio
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm portaudio-$installed_portaudio_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf portaudio
+ rm -rf $installed_portaudio_version.tgz
+ fi
+
+ installed_portaudio_version=""
+ fi
+}
+
+install_geoip() {
+ if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ] ; then
+ echo "Downloading, building, and installing GeoIP API:"
+ [ -f GeoIP-$GEOIP_VERSION.tar.gz ] || curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1
+ gzcat GeoIP-$GEOIP_VERSION.tar.gz | tar xf - || exit 1
+ cd GeoIP-$GEOIP_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ #
+ # Grr. Their man pages "helpfully" have an ISO 8859-1
+ # copyright symbol in the copyright notice, but OS X's
+ # default character encoding is UTF-8. sed on Mountain
+ # Lion barfs at the "illegal character sequence" represented
+ # by an ISO 8859-1 copyright symbol, as it's not a valid
+ # UTF-8 sequence.
+ #
+ # iconv the relevant man pages into UTF-8.
+ #
+ for i in geoipupdate.1.in geoiplookup6.1.in geoiplookup.1.in
+ do
+ iconv -f iso8859-1 -t utf-8 man/"$i" >man/"$i".tmp &&
+ mv man/"$i".tmp man/"$i"
+ done
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch geoip-$GEOIP_VERSION-done
+ fi
+}
+
+uninstall_geoip() {
+ if [ ! -z "$installed_geoip_version" ] ; then
+ echo "Uninstalling GeoIP API:"
+ cd GeoIP-$installed_geoip_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm geoip-$installed_geoip_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf GeoIP-$installed_geoip_version
+ rm -rf GeoIP-$installed_geoip_version.tar.gz
+ fi
+
+ installed_geoip_version=""
+ fi
+}
+
+install_c_ares() {
+ if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then
+ echo "Downloading, building, and installing C-Ares API:"
+ [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O http://c-ares.haxx.se/download/c-ares-$CARES_VERSION.tar.gz || exit 1
+ gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1
+ cd c-ares-$CARES_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch c-ares-$CARES_VERSION-done
+ fi
+}
+
+uninstall_c_ares() {
+ if [ ! -z "$installed_cares_version" ] ; then
+ echo "Uninstalling C-Ares API:"
+ cd c-ares-$installed_cares_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm c-ares-$installed_cares_version-done
+
+ if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
+ #
+ # Get rid of the previously downloaded and unpacked version.
+ #
+ rm -rf c-ares-$installed_cares_version
+ rm -rf c-ares-$installed_cares_version.tar.gz
+ fi
+
+ installed_cares_version=""
+ fi
+}
+
+install_all() {
+ #
+ # Check whether the versions we have installed are the versions
+ # requested; if not, uninstall the installed versions.
+ #
+ if [ ! -z "$installed_cares_version" -a \
+ "$installed_cares_version" != "$CARES_VERSION" ] ; then
+ echo "Installed C-Ares version is $installed_cares_version"
+ if [ -z "$CARES_VERSION" ] ; then
+ echo "C-Ares is not requested"
+ else
+ echo "Requested C-Ares version is $CARES_VERSION"
+ fi
+ uninstall_c_ares -r
+ fi
+
+ if [ ! -z "$installed_geoip_version" -a \
+ "$installed_geoip_version" != "$GEOIP_VERSION" ] ; then
+ echo "Installed GeoIP API version is $installed_geoip_version"
+ if [ -z "$GEOIP_VERSION" ] ; then
+ echo "GeoIP is not requested"
+ else
+ echo "Requested GeoIP version is $GEOIP_VERSION"
+ fi
+ uninstall_geoip -r
+ fi
+
+ if [ ! -z "$installed_portaudio_version" -a \
+ "$installed_portaudio_version" != "$PORTAUDIO_VERSION" ] ; then
+ echo "Installed PortAudio version is $installed_portaudio_version"
+ if [ -z "$PORTAUDIO_VERSION" ] ; then
+ echo "PortAudio is not requested"
+ else
+ echo "Requested PortAudio version is $PORTAUDIO_VERSION"
+ fi
+ uninstall_portaudio -r
+ fi
+
+ if [ ! -z "$installed_lua_version" -a \
+ "$installed_lua_version" != "$LUA_VERSION" ] ; then
+ echo "Installed Lua version is $installed_lua_version"
+ if [ -z "$LUA_VERSION" ] ; then
+ echo "Lua is not requested"
+ else
+ echo "Requested Lua version is $LUA_VERSION"
+ fi
+ uninstall_lua -r
+ fi
+
+ if [ ! -z "$installed_gnutls_version" -a \
+ "$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then
+ echo "Installed GnuTLS version is $installed_gnutls_version"
+ if [ -z "$GNUTLS_VERSION" ] ; then
+ echo "GnuTLS is not requested"
+ else
+ echo "Requested GnuTLS version is $GNUTLS_VERSION"
+ fi
+ uninstall_gnutls -r
+ fi
+
+ if [ ! -z "$installed_libgcrypt_version" -a \
+ "$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then
+ echo "Installed libgcrypt version is $installed_libgcrypt_version"
+ if [ -z "$LIBGCRYPT_VERSION" ] ; then
+ echo "libgcrypt is not requested"
+ else
+ echo "Requested libgcrypt version is $LIBGCRYPT_VERSION"
+ fi
+ uninstall_libgcrypt -r
+ fi
+
+ if [ ! -z "$installed_libgpg_error_version" -a \
+ "$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then
+ echo "Installed libgpg-error version is $installed_libgpg_error_version"
+ if [ -z "$LIBGPG_ERROR_VERSION" ] ; then
+ echo "libgpg-error is not requested"
+ else
+ echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION"
+ fi
+ uninstall_libgpg_error -r
+ fi
+
+ if [ ! -z "$installed_libsmi_version" -a \
+ "$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then
+ echo "Installed libsmi version is $installed_libsmi_version"
+ if [ -z "$LIBSMI_VERSION" ] ; then
+ echo "libsmi is not requested"
+ else
+ echo "Requested libsmi version is $LIBSMI_VERSION"
+ fi
+ uninstall_libsmi -r
+ fi
+
+ if [ ! -z "$installed_gtk_version" -a \
+ "$installed_gtk_version" != "$GTK_VERSION" ] ; then
+ echo "Installed GTK+ version is $installed_gtk_version"
+ if [ -z "$GTK_VERSION" ] ; then
+ echo "GTK+ is not requested"
+ else
+ echo "Requested GTK+ version is $GTK_VERSION"
+ fi
+ uninstall_gtk -r
+ fi
+
+ if [ ! -z "$installed_gdk_pixbuf_version" -a \
+ "$installed_gdk_pixbuf_version" != "$GDK_PIXBUF_VERSION" ] ; then
+ echo "Installed gdk-pixbuf version is $installed_gdk_pixbuf_version"
+ if [ -z "$GDK_PIXBUF_VERSION" ] ; then
+ echo "gdk-pixbuf is not requested"
+ else
+ echo "Requested gdk-pixbuf version is $GDK_PIXBUF_VERSION"
+ fi
+ uninstall_gdk_pixbuf -r
+ fi
+
+ if [ ! -z "$installed_pango_version" -a \
+ "$installed_pango_version" != "$PANGO_VERSION" ] ; then
+ echo "Installed Pango version is $installed_pango_version"
+ if [ -z "$PANGO_VERSION" ] ; then
+ echo "Pango is not requested"
+ else
+ echo "Requested Pango version is $PANGO_VERSION"
+ fi
+ uninstall_pango -r
+ fi
+
+ if [ ! -z "$installed_atk_version" -a \
+ "$installed_atk_version" != "$ATK_VERSION" ] ; then
+ echo "Installed ATK version is $installed_atk_version"
+ if [ -z "$ATK_VERSION" ] ; then
+ echo "ATK is not requested"
+ else
+ echo "Requested ATK version is $ATK_VERSION"
+ fi
+ uninstall_atk -r
+ fi
+
+ if [ ! -z "$installed_cairo_version" -a \
+ "$installed_cairo_version" != "$CAIRO_VERSION" ] ; then
+ echo "Installed Cairo version is $installed_cairo_version"
+ if [ -z "$CAIRO_VERSION" ] ; then
+ echo "Cairo is not requested"
+ else
+ echo "Requested Cairo version is $CAIRO_VERSION"
+ fi
+ uninstall_cairo -r
+ fi
+
+ if [ ! -z "$installed_pixman_version" -a \
+ "$installed_pixman_version" != "$PIXMAN_VERSION" ] ; then
+ echo "Installed pixman version is $installed_pixman_version"
+ if [ -z "$PIXMAN_VERSION" ] ; then
+ echo "pixman is not requested"
+ else
+ echo "Requested pixman version is $PIXMAN_VERSION"
+ fi
+ uninstall_pixman -r
+ fi
+
+ if [ ! -z "$installed_libpng_version" -a \
+ "$installed_libpng_version" != "$PNG_VERSION" ] ; then
+ echo "Installed libpng version is $installed_libpng_version"
+ if [ -z "$PNG_VERSION" ] ; then
+ echo "libpng is not requested"
+ else
+ echo "Requested libpng version is $PNG_VERSION"
+ fi
+ uninstall_libpng -r
+ fi
+
+ if [ ! -z "$installed_qt_version" -a \
+ "$installed_qt_version" != "$QT_VERSION" ] ; then
+ echo "Installed Qt version is $installed_qt_version"
+ if [ -z "$QT_VERSION" ] ; then
+ echo "Qt is not requested"
+ else
+ echo "Requested Qt version is $QT_VERSION"
+ fi
+ uninstall_qt -r
+ fi
+
+ if [ ! -z "$installed_glib_version" -a \
+ "$installed_glib_version" != "$GLIB_VERSION" ] ; then
+ echo "Installed GLib version is $installed_glib_version"
+ if [ -z "$GLIB_VERSION" ] ; then
+ echo "GLib is not requested"
+ else
+ echo "Requested GLib version is $GLIB_VERSION"
+ fi
+ uninstall_glib -r
+ fi
+
+ if [ ! -z "$installed_pkg_config_version" -a \
+ "$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then
+ echo "Installed pkg-config version is $installed_pkg_config_version"
+ if [ -z "$PKG_CONFIG_VERSION" ] ; then
+ echo "pkg-config is not requested"
+ else
+ echo "Requested pkg-config version is $PKG_CONFIG_VERSION"
+ fi
+ uninstall_pkg_config -r
+ fi
+
+ if [ ! -z "$installed_gettext_version" -a \
+ "$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then
+ echo "Installed GNU gettext version is $installed_gettext_version"
+ if [ -z "$GETTEXT_VERSION" ] ; then
+ echo "GNU gettext is not requested"
+ else
+ echo "Requested GNU gettext version is $GETTEXT_VERSION"
+ fi
+ uninstall_gettext -r
+ fi
+
+ if [ ! -z "$installed_cmake_version" -a \
+ "$installed_cmake_version" != "$CMAKE_VERSION" ] ; then
+ echo "Installed CMake version is $installed_cmake_version"
+ if [ -z "$CMAKE_VERSION" ] ; then
+ echo "CMake is not requested"
+ else
+ echo "Requested CMake version is $CMAKE_VERSION"
+ fi
+ #
+ # XXX - really remove this?
+ # Or should we remember it as installed only if this script
+ # installed it?
+ #
+ uninstall_cmake -r
+ fi
+
+ if [ ! -z "$installed_libtool_version" -a \
+ "$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then
+ echo "Installed GNU libtool version is $installed_libtool_version"
+ if [ -z "$LIBTOOL_VERSION" ] ; then
+ echo "GNU libtool is not requested"
+ else
+ echo "Requested GNU libtool version is $LIBTOOL_VERSION"
+ fi
+ uninstall_libtool -r
+ fi
+
+ if [ ! -z "$installed_automake_version" -a \
+ "$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then
+ echo "Installed GNU automake version is $installed_automake_version"
+ if [ -z "$AUTOMAKE_VERSION" ] ; then
+ echo "GNU automake is not requested"
+ else
+ echo "Requested GNU automake version is $AUTOMAKE_VERSION"
+ fi
+ uninstall_automake -r
+ fi
+
+ if [ ! -z "$installed_autoconf_version" -a \
+ "$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then
+ echo "Installed GNU autoconf version is $installed_autoconf_version"
+ if [ -z "$AUTOCONF_VERSION" ] ; then
+ echo "GNU autoconf is not requested"
+ else
+ echo "Requested GNU autoconf version is $AUTOCONF_VERSION"
+ fi
+ uninstall_autoconf -r
+ fi
+
+ if [ ! -z "$installed_xz_version" -a \
+ "$installed_xz_version" != "$XZ_VERSION" ] ; then
+ echo "Installed xz version is $installed_xz_version"
+ if [ -z "$XZ_VERSION" ] ; then
+ echo "xz is not requested"
+ else
+ echo "Requested xz version is $XZ_VERSION"
+ fi
+ uninstall_xz -r
+ fi
+
+ #
+ # Start with xz: It is the sole download format of glib later than 2.31.2
+ #
+ install_xz
+
+ install_autoconf
+
+ install_automake
+
+ install_libtool
+
+ install_cmake
+
+ #
+ # Start with GNU gettext; GLib requires it, and OS X doesn't have it
+ # or a BSD-licensed replacement.
+ #
+ # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
+ # by default, which causes, for example, stpncpy to be defined as
+ # a hairy macro that collides with the GNU gettext configure script's
+ # attempts to workaround AIX's lack of a declaration for stpncpy,
+ # with the result being a huge train wreck. Define _FORTIFY_SOURCE
+ # as 0 in an attempt to keep the trains on separate tracks.
+ #
+ install_gettext
+
+ #
+ # GLib depends on pkg-config.
+ # By default, pkg-config depends on GLib; we break the dependency cycle
+ # by configuring pkg-config to use its own internal version of GLib.
+ #
+ install_pkg_config
+
+ install_glib
+
+ #
+ # Now we have reached a point where we can build everything but
+ # the GUI (Wireshark).
+ #
+ install_qt
+
+ if [ "$GTK_VERSION" ]; then
+ #
+ # GTK+ 3 requires a newer Cairo build than the one that comes with
+ # 10.6, so we build Cairo if we are using GTK+ 3.
+ #
+ # In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+
+ # rather than X11 GTK+, we might have to build and install Cairo.
+ # In 10.8 and later, there is no X11, but it's included in Xquartz;
+ # again, if we build with "native" GTK+, we'd have to build and install
+ # it.
+ #
+ if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then
+ #
+ # Requirements for Cairo first
+ #
+ # The libpng that comes with the X11 for Leopard has a bogus
+ # pkg-config file that lies about where the header files are,
+ # which causes other packages not to be able to find its
+ # headers.
+ #
+ # The libpng in later versions is not what the version of
+ # libpixman we build below wants - it wants libpng15.
+ #
+ install_libpng
+
+ #
+ # The libpixman versions that come with the X11s for Leopard,
+ # Snow Leopard, and Lion is too old to support Cairo's image
+ # surface backend feature (which requires pixman-1 >= 0.22.0).
+ #
+ # XXX - what about the one that comes with the latest version
+ # of Xquartz?
+ #
+ install_pixman
+
+ #
+ # And now Cairo itself.
+ # XXX - with the libxcb that comes with 10.6,
+ # xcb_discard_reply() is missing, and the build fails.
+ #
+ install_cairo
+ fi
+
+ install_atk
+
+ install_pango
+
+ install_gdk_pixbuf
+
+ install_gtk
+ fi
+
+ #
+ # Now we have reached a point where we can build everything including
+ # the GUI (Wireshark), but not with any optional features such as
+ # SNMP OID resolution, some forms of decryption, Lua scripting, playback
+ # of audio, or GeoIP mapping of IP addresses.
+ #
+ # We now conditionally download optional libraries to support them;
+ # the default is to download them all.
+ #
+
+ install_libsmi
+
+ install_libgpg_error
+
+ install_libgcrypt
+
+ install_gnutls
+
+ install_lua
+
+ install_portaudio
+
+ install_geoip
+
+ install_c_ares
+}
+
+uninstall_all() {
+ if [ -d macosx-support-libs ]
+ then
+ cd macosx-support-libs
+
+ #
+ # Uninstall items in the reverse order from the order in which they're
+ # installed. Only uninstall if the download/build/install process
+ # completed; uninstall the version that appears in the name of
+ # the -done file.
+ #
+ # We also do a "make distclean", so that we don't have leftovers from
+ # old configurations.
+ #
+ uninstall_c_ares
+
+ uninstall_geoip
+
+ uninstall_portaudio
+
+ uninstall_lua
+
+ uninstall_gnutls
+
+ uninstall_libgcrypt
+
+ uninstall_libgpg_error
+
+ uninstall_libsmi
+
+ uninstall_gtk
+
+ uninstall_gdk_pixbuf
+
+ uninstall_pango
+
+ uninstall_atk
+
+ uninstall_cairo
+
+ uninstall_pixman
+
+ uninstall_libpng
+
+ uninstall_qt
+
+ uninstall_glib
+
+ uninstall_pkg_config
+
+ uninstall_gettext
+
+ #
+ # XXX - really remove this?
+ # Or should we remember it as installed only if this script
+ # installed it?
+ #
+ uninstall_cmake
+
+ uninstall_libtool
+
+ uninstall_automake
+
+ uninstall_autoconf
+
+ uninstall_xz
+ fi
+}
+
#
# Do we have permission to write in /usr/local?
#
# (If that's not the case, this test needs to check the subdirectories
# as well.)
#
-# If not, do "make install" with sudo.
+# If not, do "make install", "make uninstall", the removes for Lua,
+# and the renames of [g]libtool* with sudo.
#
if [ -w /usr/local ]
then
- DO_MAKE_INSTALL="make install"
+ DO_MAKE_INSTALL="make install"
+ DO_MAKE_UNINSTALL="make uninstall"
+ DO_RM="rm"
+ DO_MV="mv"
else
- DO_MAKE_INSTALL="sudo make install"
+ DO_MAKE_INSTALL="sudo make install"
+ DO_MAKE_UNINSTALL="sudo make uninstall"
+ DO_RM="sudo rm"
+ DO_MV="sudo mv"
fi
-export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig
-
#
-# Do all the downloads and untarring in a subdirectory, so all that
-# stuff can be removed once we've installed the support libraries.
+# If we have SDKs available, the default target OS is the major version
+# of the one we're running; get that and strip off the third component
+# if present.
#
-if [ ! -d macosx-support-libs ]
-then
- mkdir macosx-support-libs || exit 1
-fi
-cd macosx-support-libs
+for i in /Developer/SDKs \
+ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
+ /Library/Developer/CommandLineTools/SDKs
+do
+ if [ -d "$i" ]
+ then
+ min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'`
-# Start with xz: It is the sole download format of glib later than 2.31.2
-#
-echo "Downloading, building, and installing xz:"
-curl -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
-tar xf xz-$XZ_VERSION.tar.bz2 || exit 1
-cd xz-$XZ_VERSION
-CFLAGS="-D_FORTIFY_SOURCE=0" ./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
+ #
+ # That's also the OS whose SDK we'd be using.
+ #
+ sdk_target=$min_osx_target
+ break
+ fi
+done
-if [ -n "$CMAKE" ]; then
- echo "Downloading, building, and installing CMAKE:"
- cmake_dir=`expr $CMAKE_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- curl -O http://www.cmake.org/files/v$cmake_dir/cmake-$CMAKE_VERSION.tar.gz || exit 1
- gzcat cmake-$CMAKE_VERSION.tar.gz | tar xf - || exit 1
- cd cmake-$CMAKE_VERSION
- ./bootstrap || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
-fi
+#
+# Parse command-line flags:
+#
+# -h - print help.
+# -t <target> - build libraries so that they'll work on the specified
+# version of OS X and later versions.
+# -u - do an uninstall.
+#
+while getopts ht:u name
+do
+ case $name in
+ u)
+ do_uninstall=yes
+ ;;
+ t)
+ min_osx_target="$OPTARG"
+ ;;
+ h|?)
+ echo "Usage: macosx-setup.sh [ -t <target> ] [ -u ]" 1>&1
+ exit 0
+ ;;
+ esac
+done
#
-# Start with GNU gettext; GLib requires it, and OS X doesn't have it
-# or a BSD-licensed replacement.
-#
-# At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
-# by default, which causes, for example, stpncpy to be defined as
-# a hairy macro that collides with the GNU gettext configure script's
-# attempts to workaround AIX's lack of a declaration for stpncpy,
-# with the result being a huge train wreck. Define _FORTIFY_SOURCE
-# as 0 in an attempt to keep the trains on separate tracks.
-#
-echo "Downloading, building, and installing GNU gettext:"
-curl -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
-tar xf gettext-$GETTEXT_VERSION.tar.gz || exit 1
-cd gettext-$GETTEXT_VERSION
-CFLAGS="-D_FORTIFY_SOURCE=0" ./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing GLib:"
-glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
-xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
-cd glib-$GLIB_VERSION
-#
-# OS X ships with libffi, but doesn't provide its pkg-config file;
-# explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure
-# script doesn't try to use pkg-config to get the appropriate
-# CFLAGS and LIBS.
-#
-# And, what's worse, at least with the version of Xcode that comes
-# with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
-# which causes the build of GLib to fail. If we don't find
-# "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explictly
-# define it.
-#
-if grep -qs '#define.*MACOSX' /usr/include/ffi/fficonfig.h
+# Get the version numbers of installed packages, if any.
+#
+if [ -d macosx-support-libs ]
then
- # It's defined, nothing to do
- LIBFFI_CFLAGS="-I/usr/include/ffi" LIBFFI_LIBS="-lffi" ./configure || exit 1
-else
- CFLAGS="-DMACOSX" LIBFFI_CFLAGS="-I/usr/include/ffi" LIBFFI_LIBS="-lffi" ./configure || exit 1
-fi
-make -j 3 || exit 1
-# Apply patch: we depend on libffi, but pkg-config doesn't get told.
-patch -p0 <../../macosx-support-lib-patches/glib-pkgconfig.patch || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing pkg-config:"
-curl -O http://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
-tar xf pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
-cd pkg-config-$PKG_CONFIG_VERSION
-# Avoid another pkgconfig call
-GLIB_CFLAGS="-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include" GLIB_LIBS="-L/usr/local/lib -lglib-2.0 -lintl" ./configure || exit 1
-# ./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-#
-# Now we have reached a point where we can build everything but
-# the GUI (Wireshark).
-#
-# Cairo is part of Mac OS X 10.6 and 10.7.
-# The *headers* are supplied by 10.5, but the *libraries* aren't, so
-# we have to build it on 10.5.
-# GTK+ 3 requires a newer Cairo build than the one that comes with
-# 10.6, so we build Cairo if we are using GTK+ 3.
-# In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+
-# rather than X11 GTK+, we might have to build and install Cairo.
-# The major version number of Darwin in 10.5 is 9.
-#
-if [[ -n "$GTK3" || $DARWIN_MAJOR_VERSION = "9" ]]; then
- #
- # Requirements for Cairo first
- #
- # The libpng that comes with the X11 for leopard has a bogus
- # pkg-config file that lies about where the header files are,
- # which causes other packages not to be able to find its
- # headers.
- #
- echo "Downloading, building, and installing libpng:"
- curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/libpng-$PNG_VERSION.tar.xz
- xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
- cd libpng-$PNG_VERSION
- ./configure || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
-
- #
- # The libpixman that comes with the X11 for Leopard is too old
- # to support Cairo's image surface backend feature (which requires
- # pixman-1 >= 0.22.0).
- #
- echo "Downloading, building, and installing pixman:"
- curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
- gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
- cd pixman-$PIXMAN_VERSION
- ./configure || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
-
- #
- # And now Cairo itself.
- #
- echo "Downloading, building, and installing Cairo:"
- CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
- CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
- $CAIRO_MINOR_VERSION -gt 12 ||
- ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
- then
- #
- # Starting with Cairo 1.12.2, the tarballs are compressed with
- # xz rather than gzip.
- #
- curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
- xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
- else
- curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
- tar xf cairo-$CAIRO_VERSION.tar.gz || exit 1
- fi
- cd cairo-$CAIRO_VERSION
- #./configure --enable-quartz=no || exit 1
- # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
- ./configure --enable-quartz=yes || exit 1
- #
- # We must avoid the version of libpng that comes with X11; the
- # only way I've found to force that is to forcibly set INCLUDES
- # when we do the build, so that this comes before CAIRO_CFLAGS,
- # which has -I/usr/X11/include added to it before anything
- # connected to libpng is.
- #
- INCLUDES="-I/usr/local/include/libpng15" make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
-fi
+ cd macosx-support-libs
-echo "Downloading, building, and installing ATK:"
-atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
-xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
-cd atk-$ATK_VERSION
-./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing Pango:"
-pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
-PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-if [[ $PANGO_MAJOR_VERSION -gt 1 ||
- $PANGO_MINOR_VERSION -ge 29 ]]
-then
- #
- # Starting with Pango 1.29, the tarballs are compressed with
- # xz rather than bzip2.
- #
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz
- xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
-else
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2
- tar xf pango-$PANGO_VERSION.tar.bz2 || exit 1
-fi
-cd pango-$PANGO_VERSION
-./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing gdk-pixbuf:"
-gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
-xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
-cd gdk-pixbuf-$GDK_PIXBUF_VERSION
-./configure --without-libtiff --without-libjpeg || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing GTK+:"
-gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
-GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-if [[ $GTK_MAJOR_VERSION -gt 2 ||
- $GTK_MINOR_VERSION -gt 24 ||
- ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
-then
- #
- # Starting with GTK+ 2.24.5, the tarballs are compressed with
- # xz rather than gzip, in addition to bzip2; use xz, as we've
- # built and installed it, and as xz compresses better than
- # bzip2 so the tarballs take less time to download.
- #
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz
- xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
-else
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2
- tar xf gtk+-$GTK_VERSION.tar.bz2 || exit 1
+ installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'`
+ installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'`
+ installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'`
+ installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'`
+ installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'`
+ installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'`
+ installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'`
+ installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
+ installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
+ installed_libpng_version=`ls libpng-*-done 2>/dev/null | sed 's/libpng-\(.*\)-done/\1/'`
+ installed_pixman_version=`ls pixman-*-done 2>/dev/null | sed 's/pixman-\(.*\)-done/\1/'`
+ installed_cairo_version=`ls cairo-*-done 2>/dev/null | sed 's/cairo-\(.*\)-done/\1/'`
+ installed_atk_version=`ls atk-*-done 2>/dev/null | sed 's/atk-\(.*\)-done/\1/'`
+ installed_pango_version=`ls pango-*-done 2>/dev/null | sed 's/pango-\(.*\)-done/\1/'`
+ installed_gdk_pixbuf_version=`ls gdk-pixbuf-*-done 2>/dev/null | sed 's/gdk-pixbuf-\(.*\)-done/\1/'`
+ installed_gtk_version=`ls gtk+-*-done 2>/dev/null | sed 's/gtk+-\(.*\)-done/\1/'`
+ installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'`
+ installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'`
+ installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'`
+ installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'`
+ installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'`
+ installed_portaudio_version=`ls portaudio-*-done 2>/dev/null | sed 's/portaudio-\(.*\)-done/\1/'`
+ installed_geoip_version=`ls geoip-*-done 2>/dev/null | sed 's/geoip-\(.*\)-done/\1/'`
+ installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'`
+
+ #
+ # If we don't have a versioned -done file for portaudio, but do have
+ # an unversioned -done file for it, assume the installed version is the
+ # requested version, and rename the -done file to include that version.
+ #
+ if [ -z "$installed_portaudio_version" -a -f portaudio-done ] ; then
+ mv portaudio-done portaudio-$PORTAUDIO_VERSION-done
+ installed_portaudio_version=`ls portaudio-*-done 2>/dev/null | sed 's/portaudio-\(.*\)-done/\1/'`
+ fi
+
+ cd ..
fi
-cd gtk+-$GTK_VERSION
-if [ $DARWIN_MAJOR_VERSION -ge "12" ]
+
+if [ "$do_uninstall" = "yes" ]
then
- #
- # GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
- # CUPS printing backend - either the CUPS API changed incompatibly
- # or the backend was depending on non-API implementation details.
- #
- # Configure it out, on Mountain Lion and later, for now.
- # (12 is the Darwin major version number in Mountain Lion.)
- #
- ./configure --disable-cups || exit 1
-else
- ./configure || exit 1
+ uninstall_all
+ exit 0
fi
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
#
-# Now we have reached a point where we can build everything including
-# the GUI (Wireshark), but not with any optional features such as
-# SNMP OID resolution, some forms of decryption, Lua scripting, playback
-# of audio, or GeoIP mapping of IP addresses.
+# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
+# invoked without CFLAGS or CXXFLAGS being set in the environment.
#
-# We now conditionally download optional libraries to support them;
-# the default is to download them all.
+# However, we *are* setting them in the environment, for our own
+# nefarious purposes, so start them out as "-g -O2".
#
+CFLAGS="-g -O2"
+CXXFLAGS="-g -O2"
-if [ ! -z $LIBSMI_VERSION ]
-then
- echo "Downloading, building, and installing libsmi:"
- curl -L -O ftp://ftp.ibr.cs.tu-bs.de/pub/local/libsmi/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
- tar xf libsmi-$LIBSMI_VERSION.tar.gz || exit 1
- cd libsmi-$LIBSMI_VERSION
- ./configure || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+#
+# To make this work on Leopard (rather than working *on* Snow Leopard
+# when building *for* Leopard) will take more work.
+#
+# For one thing, Leopard's /usr/X11/lib/libXdamage.la claims, at least
+# with all software updates applied, that the Xdamage shared library
+# is libXdamage.1.0.0.dylib, but it is, in fact, libXdamage.1.1.0.dylib.
+# This causes problems when building GTK+, so the script would have to
+# fix that file.
+#
+if [[ $DARWIN_MAJOR_VERSION -le 9 ]]; then
+ echo "This script does not support any versions of OS X before Snow Leopard" 1>&2
+ exit 1
fi
-if [ ! -z $LIBGPG_ERROR_VERSION ]
-then
- echo "Downloading, building, and installing libgpg-error:"
- curl -L -O ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
- bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
- cd libgpg-error-$LIBGPG_ERROR_VERSION
- ./configure || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+# if no make options are present, set default options
+if [ -z "$MAKE_BUILD_OPTS" ] ; then
+ # by default use 1.5x number of cores for parallel build
+ MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))"
fi
-if [ ! -z $LIBGCRYPT_VERSION ]
+#
+# If we have a target release, look for the oldest SDK that's for an
+# OS equal to or later than that one, and build libraries against it
+# rather than against the headers and, more importantly, libraries
+# that come with the OS, so that we don't end up with support libraries
+# that only work on the OS version on which we built them, not earlier
+# versions of the same release, or earlier releases if the minimum is
+# earlier.
+#
+if [ ! -z "$min_osx_target" ]
then
- #
- # libgpg-error is required for libgcrypt.
- #
- if [ -z $LIBGPG_ERROR_VERSION ]
- then
- echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2
- exit 1
- fi
-
- echo "Downloading, building, and installing libgcrypt:"
- curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
- tar xf libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
- cd libgcrypt-$LIBGCRYPT_VERSION
- #
- # The assembler language code is not compatible with the OS X
- # x86 assembler (or is it an x86-64 vs. x86-32 issue?).
- #
- ./configure --disable-asm || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
-fi
+ #
+ # Get the real version - strip off the "10.".
+ # We'll worry about that if, as, and when there's ever
+ # an OS XI.
+ #
+ deploy_real_version=`echo "$min_osx_target" | sed -n 's/10\.\(.*\)/\1/p'`
-if [ ! -z $GNUTLS_VERSION ]
-then
- #
- # GnuTLS requires libgcrypt (or nettle, in newer versions).
- #
- if [ -z $LIBGCRYPT_VERSION ]
- then
- echo "GnuTLS requires libgcrypt, but you didn't install libgcrypt" 1>&2
- exit 1
- fi
-
- echo "Downloading, building, and installing GnuTLS:"
- curl -L -O http://ftp.gnu.org/gnu/gnutls/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
- bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
- cd gnutls-$GNUTLS_VERSION
- #
- # Use libgcrypt, not nettle.
- # XXX - is there some reason to prefer nettle? Or does
- # Wireshark directly use libgcrypt routines?
- #
- ./configure --with-libgcrypt --without-p11-kit || exit 1
- make -j 3 || exit 1
- #
- # The pkgconfig file for GnuTLS says "requires zlib", but OS X,
- # while it supplies zlib, doesn't supply a pkgconfig file for
- # it.
- #
- # Patch the GnuTLS pkgconfig file not to require zlib.
- # (If the capabilities of GnuTLS that Wireshark uses don't
- # depend on building GnuTLS with zlib, an alternative would be
- # to configure it not to use zlib.)
- #
- patch -p0 lib/gnutls.pc.in <../../macosx-support-lib-patches/gnutls-pkgconfig.patch || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+ #
+ # Search each directory that might contain SDKs.
+ #
+ sdkpath=""
+ for sdksdir in /Developer/SDKs \
+ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
+ /Library/Developer/CommandLineTools/SDKs
+ do
+ #
+ # Get a list of all the SDKs.
+ #
+ if ! test -d "$sdksdir"
+ then
+ #
+ # There is no directory with that name.
+ # Move on to the next one in the list, if any.
+ #
+ continue
+ fi
+
+ #
+ # Get a list of all the SDKs in that directory, if any.
+ #
+ sdklist=`(cd "$sdksdir"; ls -d MacOSX10.[0-9]*.sdk 2>/dev/null)`
+
+ for sdk in $sdklist
+ do
+ #
+ # Get the real version for this SDK.
+ #
+ sdk_real_version=`echo "$sdk" | sed -n 's/MacOSX10\.\(.*\)\.sdk/\1/p'`
+
+ #
+ # Is it for the deployment target or some later release?
+ #
+ if test "$sdk_real_version" -ge "$deploy_real_version"
+ then
+ #
+ # Yes, use it.
+ #
+ sdkpath="$sdksdir/$sdk"
+ qt_sdk_arg="-sdk $sdk"
+ break 2
+ fi
+ done
+ done
+
+ if [ -z "$sdkpath" ]
+ then
+ echo "macosx-setup.sh: Couldn't find an SDK for OS X $min_osx_target or later" 1>&2
+ exit 1
+ fi
+
+ SDKPATH="$sdkpath"
+ sdk_target=10.$sdk_real_version
+ echo "Using the 10.$sdk_real_version SDK"
+
+ #
+ # Make sure there are links to /usr/local/include and /usr/local/lib
+ # in the SDK's usr/local.
+ #
+ if [ ! -e $SDKPATH/usr/local/include ]
+ then
+ if [ ! -d $SDKPATH/usr/local ]
+ then
+ sudo mkdir $SDKPATH/usr/local
+ fi
+ sudo ln -s /usr/local/include $SDKPATH/usr/local/include
+ fi
+ if [ ! -e $SDKPATH/usr/local/lib ]
+ then
+ if [ ! -d $SDKPATH/usr/local ]
+ then
+ sudo mkdir $SDKPATH/usr/local
+ fi
+ sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
+ fi
+
+ #
+ # Set the minimum OS version for which to build to the specified
+ # minimum target OS version, so we don't, for example, end up using
+ # linker features supported by the OS verson on which we're building
+ # but not by the target version.
+ #
+ VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
+
+ #
+ # Compile and link against the SDK.
+ #
+ SDKFLAGS="-isysroot $SDKPATH"
+
+ if [[ "$min_osx_target" == "10.5" ]]
+ then
+ #
+ # Cairo is part of Mac OS X 10.6 and later.
+ # The *headers* are supplied by 10.5, but the *libraries*
+ # aren't, so we have to build it if we're building for 10.5.
+ #
+ cairo_not_in_the_os=yes
+
+ #
+ # Build with older versions of the support libraries, as
+ # were used on the Wireshark Leopard buildbot at one
+ # point. (Most of these versions come from the About page
+ # from Wireshark 1.8.6, the last build done on that buildbot;
+ # the ATK version isn't reported, so this is a guess.)
+ #
+ # If you want to try building with newer versions of
+ # the libraries, note that:
+ #
+ # The version of fontconfig that comes with Leopard doesn't
+ # support FC_WEIGHT_EXTRABLACK, so we can't use any version
+ # of Pango newer than 1.22.4.
+ #
+ # However, Pango 1.22.4 doesn't work with versions of GLib
+ # after 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and
+ # GLib 2.29.8 and later deprecate it (there doesn't appear to
+ # be a GLib 2.29.7). That means we'd either have to patch
+ # Pango not to use it (just use "const"; G_CONST_RETURN was
+ # there to allow code to choose whether to use "const" or not),
+ # or use GLib 2.29.6 or earlier.
+ #
+ # GLib 2.29.6 includes an implementation of g_bit_lock() that,
+ # on x86 (32-bit and 64-bit), uses asms in a fashion
+ # ("asm volatile goto") that requires GCC 4.5 or later, which
+ # is later than the compilers that come with Leopard and Snow
+ # Leopard. Recent versions of GLib check for that, but 2.29.6
+ # doesn't, so, if you want to build GLib 2.29.6 on Leopard or
+ # Snow Leopard, you would have to patch glib/gbitlock.c to do
+ # what the newer versions of GLib do:
+ #
+ # define a USE_ASM_GOTO macro that indicates whether "asm goto"
+ # can be used:
+ # #if (defined (i386) || defined (__amd64__))
+ # #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ # #define USE_ASM_GOTO 1
+ # #endif
+ # #endif
+ #
+ # replace all occurrences of
+ #
+ # #if defined (__GNUC__) && (defined (i386) || defined (__amd64__))
+ #
+ # with
+ #
+ # #ifdef USE_ASM_GOTO
+ #
+ # Using GLib 2.29.6 or earlier, however, means that we can't
+ # use a version of ATK later than 2.3.93, as those versions
+ # don't work with GLib 2.29.6. The same applies to gdk-pixbuf;
+ # versions of gdk-pixbuf after 2.24.1 won't work with GLib
+ # 2.29.6.
+ #
+ # Then you have to make sure that what you've build doesn't
+ # cause the X server that comes with Leopard to crash; at
+ # least one attempt at building for Leopard did.
+ #
+ # At least if building on Leopard, you might also find
+ # that, with various older versions of Cairo, including
+ # 1.6.4 and at least some 1.8.x versions, when you try to
+ # build it, the build fails because it can't find
+ # png_set_longjmp_fn(). I vaguely remember dealing with that,
+ # ages ago, but don't remember what I did.
+ #
+ GLIB_VERSION=2.16.3
+ CAIRO_VERSION=1.6.4
+ ATK_VERSION=1.24.0
+ PANGO_VERSION=1.20.2
+ GTK_VERSION=2.12.9
+
+ #
+ # That version of GTK+ includes gdk-pixbuf.
+ # XXX - base this on the version of GTK+ requested.
+ #
+ GDK_PIXBUF_VERSION=
+
+ #
+ # Libgcrypt 1.5.0 fails to compile due to some problem with an
+ # asm in rijndael.c, at least with i686-apple-darwin10-gcc-4.2.1
+ # (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) when building
+ # 32-bit.
+ #
+ # We try libgcrypt 1.4.3 instead, as that's what shows up in
+ # the version from the Leopard buildbot.
+ LIBGCRYPT_VERSION=1.4.3
+
+ #
+ # Build 32-bit while we're at it; Leopard has a bug that
+ # causes some BPF functions not to work with 64-bit userland
+ # code, so capturing won't work.
+ #
+ CFLAGS="$CFLAGS -arch i386"
+ CXXFLAGS="$CXXFLAGS -arch i386"
+ export LDFLAGS="$LDFLAGS -arch i386"
+ fi
fi
-if [ ! -z $LUA_VERSION ]
-then
- echo "Downloading, building, and installing Lua:"
- curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
- tar xf lua-$LUA_VERSION.tar.gz || exit 1
- cd lua-$LUA_VERSION
- make -j 3 macosx || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+export CFLAGS
+export CXXFLAGS
+
+#
+# You need Xcode or the command-line tools installed to get the compilers.
+#
+if [ ! -x /usr/bin/xcodebuild ]; then
+ echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
+ exit 1
fi
-if [ ! -z $PORTAUDIO_VERSION ]
-then
- echo "Downloading, building, and installing PortAudio:"
- curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1
- tar xf $PORTAUDIO_VERSION.tgz || exit 1
- cd portaudio
- #
- # Un-comment an include that's required on Lion.
- #
- patch -p0 include/pa_mac_core.h <../../macosx-support-lib-patches/portaudio-pa_mac_core.h.patch
- #
- # Disable fat builds - the configure script doesn't work right
- # with Xcode 4 if you leave them enabled, and we don't build
- # any other libraries fat (GLib, for example, would be very
- # hard to build fat), so there's no advantage to having PortAudio
- # built fat.
- #
- # Set the minimum OS X version to 10.4, to suppress some
- # deprecation warnings.
- #
- CFLAGS="-mmacosx-version-min=10.4" ./configure --disable-mac-universal || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+if [ "$QT_VERSION" ]; then
+ #
+ # We need Xcode, not just the command-line tools, installed to build
+ # Qt.
+ #
+ if ! /usr/bin/xcrun -find xcrun >/dev/null 2>&1; then
+ echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
+ echo "The command-line build tools are not sufficient to build Qt."
+ exit 1
+ fi
+fi
+if [ "$GTK_VERSION" ]; then
+ #
+ # If we're building with GTK+, you also need the X11 SDK; with at least
+ # some versions of OS X and Xcode, that is, I think, an optional install.
+ # (Or it might be installed with X11, but I think *that* is an optional
+ # install on at least some versions of OS X.)
+ #
+ if [ ! -d /usr/X11/include ]; then
+ echo "Please install X11 and the X11 SDK first."
+ echo " You can either use http://xquartz.macosforge.org/, e.g."
+ echo " http://xquartz-dl.macosforge.org/SL/XQuartz-$XQUARTZ_VERSION.dmg"
+ echo " or the native Apple packages if you are on Lion or below."
+ exit 1
+ fi
fi
-if [ ! -z $GEOIP_VERSION ]
+export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig
+
+#
+# Do all the downloads and untarring in a subdirectory, so all that
+# stuff can be removed once we've installed the support libraries.
+#
+if [ ! -d macosx-support-libs ]
then
- echo "Downloading, building, and installing GeoIP API:"
- curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1
- tar xf GeoIP-$GEOIP_VERSION.tar.gz || exit 1
- cd GeoIP-$GEOIP_VERSION
- ./configure || exit 1
- #
- # Grr. Their man pages "helpfully" have an ISO 8859-1
- # copyright symbol in the copyright notice, but OS X's
- # default character encoding is UTF-8. sed on Mountain
- # Lion barfs at the "illegal character sequence" represented
- # by an ISO 8859-1 copyright symbol, as it's not a valid
- # UTF-8 sequence.
- #
- # iconv the relevant man pages into UTF-8.
- #
- for i in geoipupdate.1.in geoiplookup6.1.in geoiplookup.1.in
- do
- iconv -f iso8859-1 -t utf-8 man/"$i" >man/"$i".tmp &&
- mv man/"$i".tmp man/"$i"
- done
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+ mkdir macosx-support-libs || exit 1
fi
+cd macosx-support-libs
+
+install_all
echo ""
echo "export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig"
echo ""
if [ -n "$CMAKE" ]; then
- echo "mkdir build; cd build"
- echo "cmake .."
- echo
- echo "or"
- echo
+ echo "mkdir build; cd build"
+ echo "cmake .."
+ echo
+ echo "or"
+ echo
fi
echo "./autogen.sh"
echo "mkdir build; cd build"
echo "../configure"
echo ""
-echo "make -j 3"
+echo "make $MAKE_BUILD_OPTS"
echo "make install"
echo ""
echo "Make sure you are allowed capture access to the network devices"
-echo "See: http://wiki.wireshark.org/CaptureSetup/CapturePrivileges"
+echo "See: https://wiki.wireshark.org/CaptureSetup/CapturePrivileges"
echo ""