Samba4 developer howto
-----------------------
+======================
tridge@samba.org, December 2004
+A more up to date version of this howto can be found in the wiki
+at http://wiki.samba.org/index.php/Samba4/HOWTO.
This is a very basic document on how to setup a simple Samba4
server. This is aimed at developers who are already familiar with
Samba3 and wish to participate in Samba4 development. This is not
aimed at production use of Samba4.
+.. contents::
Step 1: download Samba4
-----------------------
+If you have downloaded the Samba4 code via a tarball released from the
+samba.org website, Step 1 has already been completed for you. For testing
+with the version released in the tarball, you may continue on to Step 2. Note
+that the references below to the top-level directory named "samba4" will
+instead be based on the name of the tarball downloaded (e.g.
+"samba-4.0.0alpha3" for the tarball samba-4.0.0alpha3.tar.gz).
+
There are 2 methods of doing this:
- method 1: "rsync -avz samba.org::ftp/unpacked/samba4 ."
+ method 1: "rsync -avz samba.org::ftp/unpacked/samba_4_0_test/ samba4"
- method 2: "svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0 samba4"
+ method 2: "git clone git://git.samba.org/samba.git samba4; cd samba4; git checkout v4-0-test; cd .."
both methods will create a directory called "samba4" in the current
-directory. If you don't have rsync or svn then install one of them.
+directory. If you don't have rsync or git then install one of them.
+
+Since only released versions of Samba contain a pregenerated configure script,
+you will have to generate it by hand::
-Note that the above rsync command will give you a checked out svn
-repository. So if you also have svn you can update it to the latest
-version at some future date using:
+ $ cd samba4/source
+ $ ./autogen.sh
- cd samba4
- svn up
+Note that the above rsync command will give you a checked out git
+repository. So if you also have git you can update it to the latest
+version at some future date using::
+ $ cd samba4
+ $ git pull origin v4-0-test
Step 2: compile Samba4
----------------------
-Run this:
+Recommended optional development libraries:
+- acl and xattr development libraries
+- gnutls
+- readline
- cd samba4/source
- ./autogen.sh
- ./configure.developer -C
- make
-
-If you have gcc 3.4 or newer, then run "make pch" before "make" to
-greatly speed up the compile process (about 5x faster).
+Run this::
+ $ cd samba4/source
+ $ ./configure
+ $ make
Step 3: install Samba4
----------------------
Run this as a user who have permission to write to the install
directory (defaults to /usr/local/samba). Use --prefix option to
configure above to change this.
+
+::
- make install
+ # make install
Step 4: provision Samba4
------------------------
The "provision" step sets up a basic user database.
+Must be run as a user with permission to write to the install directory.
- cd source
- ./script/provision.pl --realm=YOUR.REALM --domain=YOURDOM --adminpass=SOMEPASSWORD
+::
-This will create a file called newsam.ldb. You need to copy this to
-sam.ldb in the "private" subdirectory of your install. For example:
+ # cd source
+ # bin/smbpython ./setup/provision --realm=YOUR.REALM --domain=YOURDOM \
+ # --adminpass=SOMEPASSWORD --server-role='domain controller'
- cp newsam.ldb /usr/local/samba/private/sam.ldb
+REMINDER: Use the path to smbpython, as the provision command
+ will not work with the system python.
+'YOURDOM' is the NT4 style domain name. 'YOUR.REALM' is your kerberos
+realm, which is typically your DNS domain name.
Step 5: Create a simple smb.conf
--------------------------------
-You need to create a smb.conf file in the lib/ directory of your
-install. The default is /usr/local/samba/lib/smb.conf. A minimal
-smb.conf would be:
-
- workgroup = YOURDOM
+The provisioning will create a very simple smb.conf with no shares by
+default. You will need to update it to add at least one share. For
+example::
[test]
path = /data/test
read only = no
-The workgroup must exactly match the --domain argument you gave to provision.pl
-
Step 6: starting Samba4
-----------------------
The simplest is to just run "smbd", but as a developer you may find
-the following more useful:
+the following more useful::
- smbd -i -M single -d3
+ # smbd -i -M single
that means "start smbd without messages in stdout, and running a
-single process, with level 3 debugging". That mode of operation makes
-debugging smbd with gdb particularly easy.
+single process. That mode of operation makes debugging smbd with gdb
+particularly easy.
+
+Note that now it is no longer necessary to have an instance of nmbd
+from Samba 3 running. If you are running any smbd or nmbd processes
+they need to be stopped before starting smbd from Samba 4.
Make sure you put the bin and sbin directories from your new install
in your $PATH. Make sure you run the right version!
Step 7: testing Samba4
----------------------
-try these commands:
+try this command::
- smbclient //localhost/test -Uadministrator%SOMEPASSWORD
- or
- ./script/tests/test_posix.sh //localhost/test administrator SOMEPASSWORD
+ $ smbclient //localhost/test -Uadministrator%SOMEPASSWORD
NOTE about filesystem support
supports both the "user" and "system" xattr namespaces.
If you run Linux with a 2.6 kernel and ext3 this means you need to
-include the option "user_xattr" in your /etc/fstab. For example:
+include the option "user_xattr" in your /etc/fstab. For example::
-/dev/hda3 /home ext3 user_xattr 1 1
+ /dev/hda3 /home ext3 user_xattr 1 1
You also need to compile your kernel with the XATTR and SECURITY
-options for your filesystem. For ext3 that means you need:
+options for your filesystem. For ext3 that means you need::
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_SECURITY=y
+If you are running a Linux 2.6 kernel with CONFIG_IKCONFIG_PROC
+defined you can check this with the following command::
+
+ $ zgrep CONFIG_EXT3_FS /proc/config.gz
+
If you don't have a filesystem with xattr support, then you can
-simulate it by using the option:
+simulate it by using the option::
posix:eadb = /usr/local/samba/eadb.tdb
-----------------------
To test your filesystem support, install the 'attr' package and run
-the following 4 commands as root:
+the following 4 commands as root::
- touch test.txt
- setfattr -n user.test -v test test.txt
- setfattr -n security.test -v test2 test.txt
- getfattr -d test.txt
- getfattr -d system.txt
+ # touch test.txt
+ # setfattr -n user.test -v test test.txt
+ # setfattr -n security.test -v test2 test.txt
+ # getfattr -d test.txt
+ # getfattr -n security.test -d test.txt
-You should see output like this:
+You should see output like this::
# file: test.txt
user.test="test"
-
+
# file: test.txt
security.test="test2"
If you get any "Operation not permitted" errors then it probably means
you didn't try the test as root.
+
+..
+ vim: ft=rest