-; The global setting for a default install
-; Copyright(C) John H Terpstra - 1997
-;======================= Global Settings =====================================
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba,
+# read the Samba-HOWTO-Collection. This may be obtained from:
+# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the
+# Samba-Guide which is generated daily and can be downloaded from:
+# http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors.
+#
+#======================= Global Settings =====================================
[global]
-; workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
- workgroup = WORKGROUP
-
-; comment is the equivalent of the NT Description field
- comment = Samba Server
-
-; printing = BSD or SYSV or AIX, etc.
- printing = bsd
- printcap name = /etc/printcap
- load printers = yes
-
-; Uncomment this if you want a guest account, you must add this to /etc/passwd
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
+ workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+ server string = Samba Server
+
+# Server role. Defines in which mode Samba will operate. Possible
+# values are "standalone server", "member server", "classic primary
+# domain controller", "classic backup domain controller", "active
+# directory domain controller".
+#
+# Most people will want "standalone sever" or "member server".
+# Running as "active directory domain controller" will require first
+# running "samba-tool domain provision" to wipe databases and create a
+# new domain.
+ server role = standalone server
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+; hosts allow = 192.168.1. 192.168.2. 127.
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
; guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
log file = /usr/local/samba/var/log.%m
-; Put a capping on the size of the log files (in Kb)
+# Put a capping on the size of the log files (in Kb).
max log size = 50
-; Options for handling file name case sensitivity and / or preservation
-; Case Sensitivity breaks many WfW and Win95 apps
-; case sensitive = yes
- short preserve case = yes
- preserve case = yes
-
-; Security and file integrity related options
- lock directory = /usr/local/samba/var/locks
- locking = yes
-; Strict locking is available for paranoid locking situations only
-; enabling this severely degrades read / write performance.
-; strict locking = yes
-; fake oplocks = yes
- share modes = yes
-
-; Security modes: USER uses Unix username/passwd, SHARE uses WfW type passwords
-; SERVER uses an other SMB server (eg: Windows NT Server or Samba)
-; to provide authentication services
- security = user
-; Use password server option only with security = server
-; password server = <NT-Server-Name>
-
-; Encrypted Password Support - Off by default. Requires smbpasswd file
-; Refer to docs/Encryption.txt
- encrypt passwords = no
-
-; Configuration Options ***** The location of this entry in your smb.conf
-; heirachy determines which parameters are overwritten - please watch out!
-; Where %m is any SMBName (machine name, or computer name) for which a custom
-; configuration is desired
+# Specifies the Kerberos or Active Directory realm the host is part of
+; realm = MY_REALM
+
+# Backend to store user information in. New installations should
+# use either tdbsam or ldapsam. smbpasswd is available for backwards
+# compatibility. tdbsam requires no further configuration.
+; passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
-; Performance Related Options
-; Before setting socket options read the smb.conf man page!!
- socket options = TCP_NODELAY
-; Use keep alive only if really needed!!!!
-; keep alive = 60
-; Configure Samba to use multiple interfaces
-; Samba will auto-detect network interfaces - only use this if
-; the auto-detection does not deliver the needed results
-; interfaces = 192.168.12.2/24 176.16.111.22/19 10.11.13.14/255.255.252.0
-
-; Browser Control Options:
-; Local Master set to True causes Samba to participate in browser elections
-; the default setting is true, this causes Samba to behave like a
-; Windows NT server. Setting this to false turns off all browser
-; election participation.
-; local master = yes
-
-; OS Level gives Samba the power to win browser elections. Windows NT = 32
-; Any value < 32 means NT wins as Master Browser, > 32 Samba gets it
-; default = 0, this ensures that Samba will NOT win the browser election.
-; os level = 33
-
-; Domain Master specifies Samba to be the Domain Master Browser
-; Only ever set this if there is NO Windows NT Domain Controller on the
-; network
-; domain master = yes
-
-; Preferred Master causes Samba to force a local browser election on startup
-; preferred master = yes
-
-; Use with care only if you have an NT server on your network that has been
-; configured at install time to be a primary domain controller.
-; domain controller = <NT-Domain-Controller-SMBName>
-
-; Domain Logon Service Options:
-; Domain logon control can be a good thing! See [netlogon] share section below!
-; Do NOT set this to yes if there is an Windows NT domain controller
-; on the network
-; domain logons = yes
-
-; run a specific logon batch file per workstation (machine)
-; logon script = %m.bat
-; run a specific logon batch file per session username (ie: Client User Name)
-; logon script = %U.bat
-
-; Where to store roving profiles (only for Win95 and WinNT)
-; %L substitutes for the SMB name we are called, %U is username
-; You must uncomment the [Profiles] share below
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+; interfaces = 192.168.12.2/24 192.168.13.2/24
+
+# Where to store roving profiles (only for Win95 and WinNT)
+# %L substitutes for this servers netbios name, %U is username
+# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
-; Windows Internet Name Serving Support Section:
-; WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-; the default is NO. If you have an Windows NT Server WINS use it!
-; Samba defaults to wins support = no
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
-; WINS Server - Tells the NMBD components of Samba to be a WINS Client
-; Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
-; WINS Proxy - Tells Samba to answer name resolution queries on behalf of a non
-; WINS Client capable client, for this to work there must be at least one
-; WINS Server on the network. The default is NO.
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
-;============================ Share Definitions ==============================
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+ dns proxy = no
+
+# These scripts are used on a domain controller or stand-alone
+# machine to add or delete corresponding unix accounts
+; add user script = /usr/sbin/useradd %u
+; add group script = /usr/sbin/groupadd %g
+; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+; delete user script = /usr/sbin/userdel %u
+; delete user from group script = /usr/sbin/deluser %u %g
+; delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
-; Un-comment the following and create the netlogon directory for Domain Logons
+# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
-; comment = Samba Network Logon Service
+; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
-; Case sensitivity breaks logon script processing!!!
-; case sensitive = no
; guest ok = yes
-; locking = no
; writable = no
-; For browseable say NO if you want to hide the NETLOGON share
-; browseable = yes
; share modes = no
-; Un-comment the following to provide a specific roving profile share
-; the default is to use the user's home directory
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
-; printable = no
; guest ok = yes
-; NOTE: There is NO need to specifically define each individual printer
+
+# NOTE: If you have a BSD-style print system there is no need to
+# specifically define each individual printer
[printers]
comment = All Printers
path = /usr/spool/samba
browseable = no
- printable = yes
-; Set public = yes to allow user 'guest account' to print
+# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
- create mask = 0700
+ printable = yes
+# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
-; A publicly accessible directory, but read only, except for people in
-; the staff group
-[public]
- comment = Public Stuff
- path = /home/samba
- public = yes
- writable = yes
- printable = no
- write list = @users
-
-; Other examples.
-;
-; A private printer, usable only by fred. Spool data will be placed in fred's
-; home directory. Note that fred must have write access to the spool directory,
-; wherever it is.
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+; comment = Public Stuff
+; path = /home/samba
+; public = yes
+; writable = no
+; printable = no
+; write list = @staff
+
+# Other examples.
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; public = no
; writable = no
; printable = yes
-;
-; A private directory, usable only by fred. Note that fred requires write
-; access to the directory.
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; public = no
; writable = yes
; printable = no
-;
-; a service which has a different directory for each machine that connects
-; this allows you to tailor configurations to incoming machines. You could
-; also use the %u option to tailor it by user name.
-; The %m gets replaced with the machine name that is connecting.
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
-;
-;
-; A publicly accessible directory, read/write to all users. Note that all files
-; created in the directory by users will be owned by the default user, so
-; any user with access can delete any other user's files. Obviously this
-; directory must be writable by the default user. Another user could of course
-; be specified, in which case all files would be owned by that user instead.
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
-;
-;
-; The following two entries demonstrate how to share a directory so that two
-; users can place files there that will be owned by the specific users. In this
-; setup, the directory should be writable by both users and should have the
-; sticky bit set on it to prevent abuse. Obviously this could be extended to
-; as many users as required.
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; printable = no
; create mask = 0765
+